PPv2's XLGMAC can wait for 3 idle frames before triggering a link up
event. This can cause the link to be stuck low when there's traffic on
the interface, so disable this feature.
Fixes: 4bb043262878 ("net: mvpp2: phylink support")
Signed-off-by: Maxime Chevallier <[email protected]>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index c51f1d5b550b..b6591ea0c6d6 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -4739,9 +4739,9 @@ static void mvpp2_xlg_config(struct mvpp2_port *port, unsigned int mode,
else
ctrl0 &= ~MVPP22_XLG_CTRL0_RX_FLOW_CTRL_EN;
- ctrl4 &= ~MVPP22_XLG_CTRL4_MACMODSELECT_GMAC;
- ctrl4 |= MVPP22_XLG_CTRL4_FWD_FC | MVPP22_XLG_CTRL4_FWD_PFC |
- MVPP22_XLG_CTRL4_EN_IDLE_CHECK;
+ ctrl4 &= ~(MVPP22_XLG_CTRL4_MACMODSELECT_GMAC |
+ MVPP22_XLG_CTRL4_EN_IDLE_CHECK);
+ ctrl4 |= MVPP22_XLG_CTRL4_FWD_FC | MVPP22_XLG_CTRL4_FWD_PFC;
if (old_ctrl0 != ctrl0)
writel(ctrl0, port->base + MVPP22_XLG_CTRL0_REG);
--
2.20.1
From: Maxime Chevallier <[email protected]>
Date: Fri, 19 Jul 2019 16:38:48 +0200
> PPv2's XLGMAC can wait for 3 idle frames before triggering a link up
> event. This can cause the link to be stuck low when there's traffic on
> the interface, so disable this feature.
>
> Fixes: 4bb043262878 ("net: mvpp2: phylink support")
> Signed-off-by: Maxime Chevallier <[email protected]>
Applied.