Add bit definitions required for the anx6345 and add a
sanity check in anx_dp_aux_transfer.
Signed-off-by: Icenowy Zheng <[email protected]>
Signed-off-by: Vasily Khoruzhick <[email protected]>
Signed-off-by: Torsten Duwe <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
---
drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c | 2 +-
drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h | 8 ++++++++
drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h | 3 +++
3 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c
index 60707bb5afe7..fe40bab21530 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c
@@ -116,7 +116,7 @@ ssize_t anx_dp_aux_transfer(struct regmap *map_dptx,
else /* For non-zero-sized set the length field. */
ctrl1 |= (msg->size - 1) << SP_AUX_LENGTH_SHIFT;
- if ((msg->request & DP_AUX_I2C_READ) == 0) {
+ if ((msg->size > 0) && ((msg->request & DP_AUX_I2C_READ) == 0)) {
/* When WRITE | MOT write values to data buffer */
err = regmap_bulk_write(map_dptx,
SP_DP_BUF_DATA0_REG, buffer,
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
index 430a039c10cd..24bc67ac5479 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
@@ -74,7 +74,11 @@
#define SP_CHA_STA BIT(2)
/* Bits for DP System Control Register 3 */
#define SP_HPD_STATUS BIT(6)
+#define SP_HPD_FORCE BIT(5)
+#define SP_HPD_CTRL BIT(4)
#define SP_STRM_VALID BIT(2)
+#define SP_STRM_FORCE BIT(1)
+#define SP_STRM_CTRL BIT(0)
/* Bits for DP System Control Register 4 */
#define SP_ENHANCED_MODE BIT(3)
@@ -119,6 +123,9 @@
#define SP_LINK_BW_SET_MASK 0x1f
#define SP_INITIAL_SLIM_M_AUD_SEL BIT(5)
+/* DP Lane Count Setting Register */
+#define SP_DP_LANE_COUNT_SET_REG 0xa1
+
/* DP Training Pattern Set Register */
#define SP_DP_TRAINING_PATTERN_SET_REG 0xa2
@@ -132,6 +139,7 @@
/* DP Link Training Control Register */
#define SP_DP_LT_CTRL_REG 0xa8
+#define SP_DP_LT_INPROGRESS 0x80
#define SP_LT_ERROR_TYPE_MASK 0x70
# define SP_LT_NO_ERROR 0x00
# define SP_LT_AUX_WRITE_ERROR 0x01
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
index c1030e0f74cc..9fa6f426f990 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
@@ -179,6 +179,9 @@
#define SP_VBIT BIT(1)
#define SP_AUDIO_LAYOUT BIT(0)
+/* Analog Debug Register 1 */
+#define SP_ANALOG_DEBUG1_REG 0xdc
+
/* Analog Debug Register 2 */
#define SP_ANALOG_DEBUG2_REG 0xdd
#define SP_FORCE_SW_OFF_BYPASS 0x20
--
2.16.4