2019-07-26 15:07:46

by Samuel Thibault

[permalink] [raw]
Subject: hda: Fix 1-minute detection delay when i915 module is not available

Distribution installation images such as Debian include different sets
of modules which can be downloaded dynamically. Such images may notably
include the hda sound modules but not the i915 DRM module, even if the
latter was enabled at build time, as reported on
https://bugs.debian.org/931507

In such a case hdac_i915 would be linked in and try to load the i915
module, fail since it is not there, but still wait for a whole minute
before giving up binding with it.

This fixes such as case by only waiting for the binding if the module
was properly loaded (or module support is disabled, in which case i915
is already compiled-in anyway).

Signed-off-by: Samuel Thibault <[email protected]>
---
sound/hda/hdac_i915.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)

--- a/sound/hda/hdac_i915.c
+++ b/sound/hda/hdac_i915.c
@@ -143,10 +143,14 @@ int snd_hdac_i915_init(struct hdac_bus *
if (!acomp)
return -ENODEV;
if (!acomp->ops) {
- request_module("i915");
- /* 60s timeout */
- wait_for_completion_timeout(&bind_complete,
- msecs_to_jiffies(60 * 1000));
+#ifdef CONFIG_MODULES
+ if (request_module("i915") == 0)
+#endif
+ {
+ /* 60s timeout */
+ wait_for_completion_timeout(&bind_complete,
+ msecs_to_jiffies(60 * 1000));
+ }
}
if (!acomp->ops) {
dev_info(bus->dev, "couldn't bind with audio component\n");


2019-07-26 15:50:01

by Takashi Iwai

[permalink] [raw]
Subject: Re: hda: Fix 1-minute detection delay when i915 module is not available

On Fri, 26 Jul 2019 17:05:30 +0200,
Samuel Thibault wrote:
>
> Distribution installation images such as Debian include different sets
> of modules which can be downloaded dynamically. Such images may notably
> include the hda sound modules but not the i915 DRM module, even if the
> latter was enabled at build time, as reported on
> https://bugs.debian.org/931507
>
> In such a case hdac_i915 would be linked in and try to load the i915
> module, fail since it is not there, but still wait for a whole minute
> before giving up binding with it.
>
> This fixes such as case by only waiting for the binding if the module
> was properly loaded (or module support is disabled, in which case i915
> is already compiled-in anyway).
>
> Signed-off-by: Samuel Thibault <[email protected]>
> ---
> sound/hda/hdac_i915.c | 12 ++++++++----
> 1 file changed, 8 insertions(+), 4 deletions(-)
>
> --- a/sound/hda/hdac_i915.c
> +++ b/sound/hda/hdac_i915.c
> @@ -143,10 +143,14 @@ int snd_hdac_i915_init(struct hdac_bus *
> if (!acomp)
> return -ENODEV;
> if (!acomp->ops) {
> - request_module("i915");
> - /* 60s timeout */
> - wait_for_completion_timeout(&bind_complete,
> - msecs_to_jiffies(60 * 1000));
> +#ifdef CONFIG_MODULES
> + if (request_module("i915") == 0)
> +#endif

Better to use IS_ENABLED(), so that we can avoid ugly ifdef.

if (!IS_ENABLED(CONFIG_MODULES) ||
!request_module("i915")) {
....

thanks,

Takashi