From: Philippe Schenker <[email protected]>
In order for the otg ports, that these modules support, it is needed
that dr_mode is on otg. Switch to use that feature.
Signed-off-by: Philippe Schenker <[email protected]>
---
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 2 +-
arch/arm/boot/dts/imx7-colibri.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 9a63debab0b5..6674198346d2 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -388,7 +388,7 @@
&usbotg {
pinctrl-names = "default";
disable-over-current;
- dr_mode = "peripheral";
+ dr_mode = "otg";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 67f5e0c87fdc..42478f1aa146 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -320,7 +320,7 @@
};
&usbotg1 {
- dr_mode = "host";
+ dr_mode = "otg";
};
&usdhc1 {
--
2.22.0