This is the start of the stable review cycle for the 4.14.139 release.
There are 69 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Fri 16 Aug 2019 04:55:34 PM UTC.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.139-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.14.139-rc1
Luca Coelho <[email protected]>
iwlwifi: mvm: fix version check for GEO_TX_POWER_LIMIT support
Luca Coelho <[email protected]>
iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT on version < 41
Emmanuel Grumbach <[email protected]>
iwlwifi: mvm: fix an out-of-bound access
Emmanuel Grumbach <[email protected]>
iwlwifi: don't unmap as page memory that was mapped as single
Brian Norris <[email protected]>
mwifiex: fix 802.11n/WPA detection
Wanpeng Li <[email protected]>
KVM: Fix leak vCPU's VMCS value into other pCPU
Trond Myklebust <[email protected]>
NFSv4: Fix an Oops in nfs4_do_setattr
Trond Myklebust <[email protected]>
NFSv4: Only pass the delegation to setattr if we're sending a truncate
Steve French <[email protected]>
smb3: send CAP_DFS capability during session setup
Pavel Shilovsky <[email protected]>
SMB3: Fix deadlock in validate negotiate hits reconnect
Brian Norris <[email protected]>
mac80211: don't WARN on short WMM parameters from AP
Takashi Iwai <[email protected]>
ALSA: hda - Workaround for crackled sound on AMD controller (1022:1457)
Takashi Iwai <[email protected]>
ALSA: hda - Don't override global PCM hw info flag
Wenwen Wang <[email protected]>
ALSA: firewire: fix a memory leak bug
Stanislav Lisovskiy <[email protected]>
drm/i915: Fix wrong escape clock divisor init for GLK
Guenter Roeck <[email protected]>
hwmon: (nct7802) Fix wrong detection of in4 presence
Tomas Bortoli <[email protected]>
can: peak_usb: pcan_usb_fd: Fix info-leaks to USB devices
Tomas Bortoli <[email protected]>
can: peak_usb: pcan_usb_pro: Fix info-leaks to USB devices
Roderick Colenbrander <[email protected]>
HID: sony: Fix race condition between rumble and device remove.
Leonard Crestez <[email protected]>
perf/core: Fix creating kernel counters for PMUs that override event->cpu
Peter Zijlstra <[email protected]>
tty/ldsem, locking/rwsem: Add missing ACQUIRE to read_failed sleep loop
Wenwen Wang <[email protected]>
test_firmware: fix a memory leak bug
Hannes Reinecke <[email protected]>
scsi: scsi_dh_alua: always use a 2 second delay before retrying RTPG
Tyrel Datwyler <[email protected]>
scsi: ibmvfc: fix WARN_ON during event pool release
Junxiao Bi <[email protected]>
scsi: megaraid_sas: fix panic on loading firmware crashdump
Arnd Bergmann <[email protected]>
ARM: davinci: fix sleep.S build error on ARMv4
Lorenzo Pieralisi <[email protected]>
ACPI/IORT: Fix off-by-one check in iort_dev_find_its_id()
Arnd Bergmann <[email protected]>
drbd: dynamically allocate shash descriptor
Arnaldo Carvalho de Melo <[email protected]>
perf probe: Avoid calling freeing routine multiple times for same pointer
Jiri Olsa <[email protected]>
perf tools: Fix proper buffer size for feature processing
Charles Keepax <[email protected]>
ALSA: compress: Be more restrictive about when a drain is allowed
Charles Keepax <[email protected]>
ALSA: compress: Don't allow paritial drain operations on capture streams
Charles Keepax <[email protected]>
ALSA: compress: Prevent bypasses of set_params
Charles Keepax <[email protected]>
ALSA: compress: Fix regression on compressed capture streams
Julian Wiedmann <[email protected]>
s390/qdio: add sanity checks to the fast-requeue path
Wen Yang <[email protected]>
cpufreq/pasemi: fix use-after-free in pas_cpufreq_cpu_init()
Qian Cai <[email protected]>
drm: silence variable 'conn' set but not used
Björn Gerhart <[email protected]>
hwmon: (nct6775) Fix register address and added missed tolerance for nct6106
Brian Norris <[email protected]>
mac80211: don't warn about CW params when not using them
Thomas Tai <[email protected]>
iscsi_ibft: make ISCSI_IBFT dependson ACPI instead of ISCSI_IBFT_FIND
Mauro Carvalho Chehab <[email protected]>
scripts/sphinx-pre-install: fix script for RHEL/CentOS
Laura Garcia Liebana <[email protected]>
netfilter: nft_hash: fix symhash with modulus one
Miaohe Lin <[email protected]>
netfilter: Fix rpfilter dropping vrf packets by mistake
Farhan Ali <[email protected]>
vfio-ccw: Set pa_nr to 0 if memory allocation fails for pa_iova_pfn
Florian Westphal <[email protected]>
netfilter: nfnetlink: avoid deadlock due to synchronous request_module
Stephane Grosjean <[email protected]>
can: peak_usb: fix potential double kfree_skb()
Nikita Yushchenko <[email protected]>
can: rcar_canfd: fix possible IRQ storm on high load
Suzuki K Poulose <[email protected]>
usb: yurex: Fix use-after-free in yurex_delete
Yoshihiro Shimoda <[email protected]>
usb: host: xhci-rcar: Fix timeout in xhci_suspend()
Thomas Richter <[email protected]>
perf record: Fix module size on s390
Adrian Hunter <[email protected]>
perf db-export: Fix thread__exec_comm()
Thomas Richter <[email protected]>
perf annotate: Fix s390 gap between kernel end and module start
Joerg Roedel <[email protected]>
mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()
Joerg Roedel <[email protected]>
x86/mm: Sync also unmappings in vmalloc_sync_all()
Joerg Roedel <[email protected]>
x86/mm: Check for pfn instead of page in vmalloc_sync_one()
Ben Hutchings <[email protected]>
tcp: Clear sk_send_head after purging the write queue
Gary R Hook <[email protected]>
crypto: ccp - Add support for valid authsize values less than 16
Gary R Hook <[email protected]>
crypto: ccp - Validate buffer lengths for copy operations
Nick Desaulniers <[email protected]>
lkdtm: support llvm-objcopy
Dmitry Torokhov <[email protected]>
Input: synaptics - enable RMI mode for HP Spectre X360
Mikulas Patocka <[email protected]>
loop: set PF_MEMALLOC_NOIO for the worker thread
Kevin Hao <[email protected]>
mmc: cavium: Add the missing dma unmap when the dma has finished.
Kevin Hao <[email protected]>
mmc: cavium: Set the correct dma max segment size for mmc_host
Wenwen Wang <[email protected]>
sound: fix a memory leak bug
Oliver Neukum <[email protected]>
usb: iowarrior: fix deadlock on disconnect
Gavin Li <[email protected]>
usb: usbfs: fix double-free of usb memory upon submiturb error
Gary R Hook <[email protected]>
crypto: ccp - Ignore tag length when decrypting GCM ciphertext
Gary R Hook <[email protected]>
crypto: ccp - Fix oops by properly managing allocated structures
Joe Perches <[email protected]>
iio: adc: max9611: Fix misuse of GENMASK macro
-------------
Diffstat:
Makefile | 4 +-
arch/arm/mach-davinci/sleep.S | 1 +
arch/powerpc/kvm/powerpc.c | 5 +
arch/x86/include/asm/kvm_host.h | 1 +
arch/x86/kvm/svm.c | 6 ++
arch/x86/kvm/vmx.c | 6 ++
arch/x86/kvm/x86.c | 16 +++
arch/x86/mm/fault.c | 15 ++-
drivers/acpi/arm64/iort.c | 4 +-
drivers/block/drbd/drbd_receiver.c | 14 ++-
drivers/block/loop.c | 2 +-
drivers/cpufreq/pasemi-cpufreq.c | 23 ++---
drivers/crypto/ccp/ccp-crypto-aes-galois.c | 14 +++
drivers/crypto/ccp/ccp-ops.c | 139 +++++++++++++++++++--------
drivers/firmware/Kconfig | 5 +-
drivers/firmware/iscsi_ibft.c | 4 +
drivers/gpu/drm/drm_framebuffer.c | 2 +-
drivers/gpu/drm/i915/intel_dsi_pll.c | 4 +-
drivers/hid/hid-sony.c | 15 ++-
drivers/hwmon/nct6775.c | 3 +-
drivers/hwmon/nct7802.c | 6 +-
drivers/iio/adc/max9611.c | 2 +-
drivers/input/mouse/synaptics.c | 1 +
drivers/misc/Makefile | 3 +-
drivers/mmc/host/cavium.c | 4 +-
drivers/net/can/rcar/rcar_canfd.c | 9 +-
drivers/net/can/usb/peak_usb/pcan_usb_core.c | 8 +-
drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 2 +-
drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 2 +-
drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 29 ++++--
drivers/net/wireless/intel/iwlwifi/pcie/tx.c | 2 +
drivers/net/wireless/marvell/mwifiex/main.h | 1 +
drivers/net/wireless/marvell/mwifiex/scan.c | 3 +-
drivers/s390/cio/qdio_main.c | 12 +--
drivers/s390/cio/vfio_ccw_cp.c | 4 +-
drivers/scsi/device_handler/scsi_dh_alua.c | 7 +-
drivers/scsi/ibmvscsi/ibmvfc.c | 2 +-
drivers/scsi/megaraid/megaraid_sas_base.c | 3 +
drivers/tty/tty_ldsem.c | 5 +-
drivers/usb/core/devio.c | 2 -
drivers/usb/host/xhci-rcar.c | 9 +-
drivers/usb/misc/iowarrior.c | 7 +-
drivers/usb/misc/yurex.c | 2 +-
fs/cifs/smb2pdu.c | 7 +-
fs/nfs/nfs4proc.c | 12 ++-
include/linux/ccp.h | 2 +
include/linux/kvm_host.h | 1 +
include/net/tcp.h | 3 +
include/sound/compress_driver.h | 5 +-
kernel/events/core.c | 2 +-
lib/test_firmware.c | 5 +-
mm/vmalloc.c | 9 ++
net/ipv4/netfilter/ipt_rpfilter.c | 1 +
net/ipv6/netfilter/ip6t_rpfilter.c | 8 +-
net/mac80211/driver-ops.c | 13 ++-
net/mac80211/mlme.c | 10 ++
net/netfilter/nfnetlink.c | 2 +-
net/netfilter/nft_hash.c | 2 +-
scripts/sphinx-pre-install | 2 +-
sound/core/compress_offload.c | 60 +++++++++---
sound/firewire/packets-buffer.c | 2 +-
sound/pci/hda/hda_controller.c | 13 ++-
sound/pci/hda/hda_controller.h | 2 +-
sound/pci/hda/hda_intel.c | 63 +++++++++++-
sound/sound_core.c | 3 +-
tools/perf/arch/s390/util/machine.c | 31 +++++-
tools/perf/builtin-probe.c | 10 ++
tools/perf/util/header.c | 2 +-
tools/perf/util/machine.c | 3 +-
tools/perf/util/machine.h | 2 +-
tools/perf/util/symbol.c | 7 +-
tools/perf/util/symbol.h | 1 +
tools/perf/util/thread.c | 12 ++-
virt/kvm/kvm_main.c | 25 ++++-
74 files changed, 558 insertions(+), 170 deletions(-)
From: Nikita Yushchenko <[email protected]>
commit d4b890aec4bea7334ca2ca56fd3b12fb48a00cd1 upstream.
We have observed rcar_canfd driver entering IRQ storm under high load,
with following scenario:
- rcar_canfd_global_interrupt() in entered due to Rx available,
- napi_schedule_prep() is called, and sets NAPIF_STATE_SCHED in state
- Rx fifo interrupts are masked,
- rcar_canfd_global_interrupt() is entered again, this time due to
error interrupt (e.g. due to overflow),
- since scheduled napi poller has not yet executed, condition for calling
napi_schedule_prep() from rcar_canfd_global_interrupt() remains true,
thus napi_schedule_prep() gets called and sets NAPIF_STATE_MISSED flag
in state,
- later, napi poller function rcar_canfd_rx_poll() gets executed, and
calls napi_complete_done(),
- due to NAPIF_STATE_MISSED flag in state, this call does not clear
NAPIF_STATE_SCHED flag from state,
- on return from napi_complete_done(), rcar_canfd_rx_poll() unmasks Rx
interrutps,
- Rx interrupt happens, rcar_canfd_global_interrupt() gets called
and calls napi_schedule_prep(),
- since NAPIF_STATE_SCHED is set in state at this time, this call
returns false,
- due to that false return, rcar_canfd_global_interrupt() returns
without masking Rx interrupt
- and this results into IRQ storm: unmasked Rx interrupt happens again
and again is misprocessed in the same way.
This patch fixes that scenario by unmasking Rx interrupts only when
napi_complete_done() returns true, which means it has cleared
NAPIF_STATE_SCHED in state.
Fixes: dd3bd23eb438 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver")
Signed-off-by: Nikita Yushchenko <[email protected]>
Cc: linux-stable <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/rcar/rcar_canfd.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -1512,10 +1512,11 @@ static int rcar_canfd_rx_poll(struct nap
/* All packets processed */
if (num_pkts < quota) {
- napi_complete_done(napi, num_pkts);
- /* Enable Rx FIFO interrupts */
- rcar_canfd_set_bit(priv->base, RCANFD_RFCC(ridx),
- RCANFD_RFCC_RFIE);
+ if (napi_complete_done(napi, num_pkts)) {
+ /* Enable Rx FIFO interrupts */
+ rcar_canfd_set_bit(priv->base, RCANFD_RFCC(ridx),
+ RCANFD_RFCC_RFIE);
+ }
}
return num_pkts;
}
[ Upstream commit 1b0890cd60829bd51455dc5ad689ed58c4408227 ]
Thomas and Juliana report a deadlock when running:
(rmmod nf_conntrack_netlink/xfrm_user)
conntrack -e NEW -E &
modprobe -v xfrm_user
They provided following analysis:
conntrack -e NEW -E
netlink_bind()
netlink_lock_table() -> increases "nl_table_users"
nfnetlink_bind()
# does not unlock the table as it's locked by netlink_bind()
__request_module()
call_usermodehelper_exec()
This triggers "modprobe nf_conntrack_netlink" from kernel, netlink_bind()
won't return until modprobe process is done.
"modprobe xfrm_user":
xfrm_user_init()
register_pernet_subsys()
-> grab pernet_ops_rwsem
..
netlink_table_grab()
calls schedule() as "nl_table_users" is non-zero
so modprobe is blocked because netlink_bind() increased
nl_table_users while also holding pernet_ops_rwsem.
"modprobe nf_conntrack_netlink" runs and inits nf_conntrack_netlink:
ctnetlink_init()
register_pernet_subsys()
-> blocks on "pernet_ops_rwsem" thanks to xfrm_user module
both modprobe processes wait on one another -- neither can make
progress.
Switch netlink_bind() to "nowait" modprobe -- this releases the netlink
table lock, which then allows both modprobe instances to complete.
Reported-by: Thomas Jarosch <[email protected]>
Reported-by: Juliana Rodrigueiro <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nfnetlink.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c
index 733d3e4a30d85..2cee032af46d2 100644
--- a/net/netfilter/nfnetlink.c
+++ b/net/netfilter/nfnetlink.c
@@ -530,7 +530,7 @@ static int nfnetlink_bind(struct net *net, int group)
ss = nfnetlink_get_subsys(type << 8);
rcu_read_unlock();
if (!ss)
- request_module("nfnetlink-subsys-%d", type);
+ request_module_nowait("nfnetlink-subsys-%d", type);
return 0;
}
#endif
--
2.20.1
[ Upstream commit f3d43e2e45fd9d44ba52d20debd12cd4ee9c89bf ]
Fixed address of third NCT6106_REG_WEIGHT_DUTY_STEP, and
added missed NCT6106_REG_TOLERANCE_H.
Fixes: 6c009501ff200 ("hwmon: (nct6775) Add support for NCT6102D/6106D")
Signed-off-by: Bjoern Gerhart <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/nct6775.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c
index ca9941fa741b7..7e14143ed1191 100644
--- a/drivers/hwmon/nct6775.c
+++ b/drivers/hwmon/nct6775.c
@@ -769,7 +769,7 @@ static const u16 NCT6106_REG_TARGET[] = { 0x111, 0x121, 0x131 };
static const u16 NCT6106_REG_WEIGHT_TEMP_SEL[] = { 0x168, 0x178, 0x188 };
static const u16 NCT6106_REG_WEIGHT_TEMP_STEP[] = { 0x169, 0x179, 0x189 };
static const u16 NCT6106_REG_WEIGHT_TEMP_STEP_TOL[] = { 0x16a, 0x17a, 0x18a };
-static const u16 NCT6106_REG_WEIGHT_DUTY_STEP[] = { 0x16b, 0x17b, 0x17c };
+static const u16 NCT6106_REG_WEIGHT_DUTY_STEP[] = { 0x16b, 0x17b, 0x18b };
static const u16 NCT6106_REG_WEIGHT_TEMP_BASE[] = { 0x16c, 0x17c, 0x18c };
static const u16 NCT6106_REG_WEIGHT_DUTY_BASE[] = { 0x16d, 0x17d, 0x18d };
@@ -3592,6 +3592,7 @@ static int nct6775_probe(struct platform_device *pdev)
data->REG_FAN_TIME[0] = NCT6106_REG_FAN_STOP_TIME;
data->REG_FAN_TIME[1] = NCT6106_REG_FAN_STEP_UP_TIME;
data->REG_FAN_TIME[2] = NCT6106_REG_FAN_STEP_DOWN_TIME;
+ data->REG_TOLERANCE_H = NCT6106_REG_TOLERANCE_H;
data->REG_PWM[0] = NCT6106_REG_PWM;
data->REG_PWM[1] = NCT6106_REG_FAN_START_OUTPUT;
data->REG_PWM[2] = NCT6106_REG_FAN_STOP_OUTPUT;
--
2.20.1
From: Joe Perches <[email protected]>
commit ae8cc91a7d85e018c0c267f580820b2bb558cd48 upstream.
Arguments are supposed to be ordered high then low.
Signed-off-by: Joe Perches <[email protected]>
Fixes: 69780a3bbc0b ("iio: adc: Add Maxim max9611 ADC driver")
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/max9611.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/adc/max9611.c
+++ b/drivers/iio/adc/max9611.c
@@ -86,7 +86,7 @@
#define MAX9611_TEMP_MAX_POS 0x7f80
#define MAX9611_TEMP_MAX_NEG 0xff80
#define MAX9611_TEMP_MIN_NEG 0xd980
-#define MAX9611_TEMP_MASK GENMASK(7, 15)
+#define MAX9611_TEMP_MASK GENMASK(15, 7)
#define MAX9611_TEMP_SHIFT 0x07
#define MAX9611_TEMP_RAW(_r) ((_r) >> MAX9611_TEMP_SHIFT)
#define MAX9611_TEMP_SCALE_NUM 1000000
[ Upstream commit a6ec414a4dd529eeac5c3ea51c661daba3397108 ]
If the device driver were to send out a full queue's worth of SBALs,
current code would end up discovering the last of those SBALs as PRIMED
and erroneously skip the SIGA-w. This immediately stalls the queue.
Add a check to not attempt fast-requeue in this case. While at it also
make sure that the state of the previous SBAL was successfully extracted
before inspecting it.
Signed-off-by: Julian Wiedmann <[email protected]>
Reviewed-by: Jens Remus <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/s390/cio/qdio_main.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index ab8dd81fbc2b1..1a40c73961b83 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -1577,13 +1577,13 @@ static int handle_outbound(struct qdio_q *q, unsigned int callflags,
rc = qdio_kick_outbound_q(q, phys_aob);
} else if (need_siga_sync(q)) {
rc = qdio_siga_sync_q(q);
+ } else if (count < QDIO_MAX_BUFFERS_PER_Q &&
+ get_buf_state(q, prev_buf(bufnr), &state, 0) > 0 &&
+ state == SLSB_CU_OUTPUT_PRIMED) {
+ /* The previous buffer is not processed yet, tack on. */
+ qperf_inc(q, fast_requeue);
} else {
- /* try to fast requeue buffers */
- get_buf_state(q, prev_buf(bufnr), &state, 0);
- if (state != SLSB_CU_OUTPUT_PRIMED)
- rc = qdio_kick_outbound_q(q, 0);
- else
- qperf_inc(q, fast_requeue);
+ rc = qdio_kick_outbound_q(q, 0);
}
/* in case of SIGA errors we must process the error immediately */
--
2.20.1
[ Upstream commit 3b8179944cb0dd53e5223996966746cdc8a60657 ]
Draining makes little sense in the situation of hardware overrun, as the
hardware will have consumed all its available samples. Additionally,
draining whilst the stream is paused would presumably get stuck as no
data is being consumed on the DSP side.
Signed-off-by: Charles Keepax <[email protected]>
Acked-by: Vinod Koul <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/compress_offload.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c
index b4f1536b17cb5..2e2d184684911 100644
--- a/sound/core/compress_offload.c
+++ b/sound/core/compress_offload.c
@@ -812,7 +812,10 @@ static int snd_compr_drain(struct snd_compr_stream *stream)
case SNDRV_PCM_STATE_OPEN:
case SNDRV_PCM_STATE_SETUP:
case SNDRV_PCM_STATE_PREPARED:
+ case SNDRV_PCM_STATE_PAUSED:
return -EPERM;
+ case SNDRV_PCM_STATE_XRUN:
+ return -EPIPE;
default:
break;
}
@@ -861,7 +864,10 @@ static int snd_compr_partial_drain(struct snd_compr_stream *stream)
case SNDRV_PCM_STATE_OPEN:
case SNDRV_PCM_STATE_SETUP:
case SNDRV_PCM_STATE_PREPARED:
+ case SNDRV_PCM_STATE_PAUSED:
return -EPERM;
+ case SNDRV_PCM_STATE_XRUN:
+ return -EPIPE;
default:
break;
}
--
2.20.1
From: Gavin Li <[email protected]>
commit c43f28dfdc4654e738aa6d3fd08a105b2bee758d upstream.
Upon an error within proc_do_submiturb(), dec_usb_memory_use_count()
gets called once by the error handling tail and again by free_async().
Remove the first call.
Signed-off-by: Gavin Li <[email protected]>
Acked-by: Alan Stern <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/devio.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1811,8 +1811,6 @@ static int proc_do_submiturb(struct usb_
return 0;
error:
- if (as && as->usbm)
- dec_usb_memory_use_count(as->usbm, &as->usbm->urb_use_count);
kfree(isopkt);
kfree(dr);
if (as)
From: Joerg Roedel <[email protected]>
commit 8e998fc24de47c55b47a887f6c95ab91acd4a720 upstream.
With huge-page ioremap areas the unmappings also need to be synced between
all page-tables. Otherwise it can cause data corruption when a region is
unmapped and later re-used.
Make the vmalloc_sync_one() function ready to sync unmappings and make sure
vmalloc_sync_all() iterates over all page-tables even when an unmapped PMD
is found.
Fixes: 5d72b4fba40ef ('x86, mm: support huge I/O mapping capability I/F')
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Dave Hansen <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/mm/fault.c | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -260,11 +260,12 @@ static inline pmd_t *vmalloc_sync_one(pg
pmd = pmd_offset(pud, address);
pmd_k = pmd_offset(pud_k, address);
- if (!pmd_present(*pmd_k))
- return NULL;
- if (!pmd_present(*pmd))
+ if (pmd_present(*pmd) != pmd_present(*pmd_k))
set_pmd(pmd, *pmd_k);
+
+ if (!pmd_present(*pmd_k))
+ return NULL;
else
BUG_ON(pmd_pfn(*pmd) != pmd_pfn(*pmd_k));
@@ -286,17 +287,13 @@ void vmalloc_sync_all(void)
spin_lock(&pgd_lock);
list_for_each_entry(page, &pgd_list, lru) {
spinlock_t *pgt_lock;
- pmd_t *ret;
/* the pgt_lock only for Xen */
pgt_lock = &pgd_page_get_mm(page)->page_table_lock;
spin_lock(pgt_lock);
- ret = vmalloc_sync_one(page_address(page), address);
+ vmalloc_sync_one(page_address(page), address);
spin_unlock(pgt_lock);
-
- if (!ret)
- break;
}
spin_unlock(&pgd_lock);
}
From: Thomas Richter <[email protected]>
commit b9c0a64901d5bdec6eafd38d1dc8fa0e2974fccb upstream.
During execution of command 'perf top' the error message:
Not enough memory for annotating '__irf_end' symbol!)
is emitted from this call sequence:
__cmd_top
perf_top__mmap_read
perf_top__mmap_read_idx
perf_event__process_sample
hist_entry_iter__add
hist_iter__top_callback
perf_top__record_precise_ip
hist_entry__inc_addr_samples
symbol__inc_addr_samples
symbol__get_annotation
symbol__alloc_hist
In this function the size of symbol __irf_end is calculated. The size of
a symbol is the difference between its start and end address.
When the symbol was read the first time, its start and end was set to:
symbol__new: __irf_end 0xe954d0-0xe954d0
which is correct and maps with /proc/kallsyms:
root@s8360046:~/linux-4.15.0/tools/perf# fgrep _irf_end /proc/kallsyms
0000000000e954d0 t __irf_end
root@s8360046:~/linux-4.15.0/tools/perf#
In function symbol__alloc_hist() the end of symbol __irf_end is
symbol__alloc_hist sym:__irf_end start:0xe954d0 end:0x3ff80045a8
which is identical with the first module entry in /proc/kallsyms
This results in a symbol size of __irf_req for histogram analyses of
70334140059072 bytes and a malloc() for this requested size fails.
The root cause of this is function
__dso__load_kallsyms()
+-> symbols__fixup_end()
Function symbols__fixup_end() enlarges the last symbol in the kallsyms
map:
# fgrep __irf_end /proc/kallsyms
0000000000e954d0 t __irf_end
#
to the start address of the first module:
# cat /proc/kallsyms | sort | egrep ' [tT] '
....
0000000000e952d0 T __security_initcall_end
0000000000e954d0 T __initramfs_size
0000000000e954d0 t __irf_end
000003ff800045a8 T fc_get_event_number [scsi_transport_fc]
000003ff800045d0 t store_fc_vport_disable [scsi_transport_fc]
000003ff800046a8 T scsi_is_fc_rport [scsi_transport_fc]
000003ff800046d0 t fc_target_setup [scsi_transport_fc]
On s390 the kernel is located around memory address 0x200, 0x10000 or
0x100000, depending on linux version. Modules however start some- where
around 0x3ff xxxx xxxx.
This is different than x86 and produces a large gap for which histogram
allocation fails.
Fix this by detecting the kernel's last symbol and do no adjustment for
it. Introduce a weak function and handle s390 specifics.
Reported-by: Klaus Theurich <[email protected]>
Signed-off-by: Thomas Richter <[email protected]>
Acked-by: Heiko Carstens <[email protected]>
Cc: Hendrik Brueckner <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/arch/s390/util/machine.c | 17 +++++++++++++++++
tools/perf/util/symbol.c | 7 ++++++-
tools/perf/util/symbol.h | 1 +
3 files changed, 24 insertions(+), 1 deletion(-)
--- a/tools/perf/arch/s390/util/machine.c
+++ b/tools/perf/arch/s390/util/machine.c
@@ -6,6 +6,7 @@
#include "machine.h"
#include "api/fs/fs.h"
#include "debug.h"
+#include "symbol.h"
int arch__fix_module_text_start(u64 *start, const char *name)
{
@@ -21,3 +22,19 @@ int arch__fix_module_text_start(u64 *sta
return 0;
}
+
+/* On s390 kernel text segment start is located at very low memory addresses,
+ * for example 0x10000. Modules are located at very high memory addresses,
+ * for example 0x3ff xxxx xxxx. The gap between end of kernel text segment
+ * and beginning of first module's text segment is very big.
+ * Therefore do not fill this gap and do not assign it to the kernel dso map.
+ */
+void arch__symbols__fixup_end(struct symbol *p, struct symbol *c)
+{
+ if (strchr(p->name, '[') == NULL && strchr(c->name, '['))
+ /* Last kernel symbol mapped to end of page */
+ p->end = roundup(p->end, page_size);
+ else
+ p->end = c->start;
+ pr_debug4("%s sym:%s end:%#lx\n", __func__, p->name, p->end);
+}
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -93,6 +93,11 @@ static int prefix_underscores_count(cons
return tail - str;
}
+void __weak arch__symbols__fixup_end(struct symbol *p, struct symbol *c)
+{
+ p->end = c->start;
+}
+
const char * __weak arch__normalize_symbol_name(const char *name)
{
return name;
@@ -219,7 +224,7 @@ void symbols__fixup_end(struct rb_root *
curr = rb_entry(nd, struct symbol, rb_node);
if (prev->end == prev->start && prev->end != curr->start)
- prev->end = curr->start;
+ arch__symbols__fixup_end(prev, curr);
}
/* Last entry */
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -351,6 +351,7 @@ const char *arch__normalize_symbol_name(
#define SYMBOL_A 0
#define SYMBOL_B 1
+void arch__symbols__fixup_end(struct symbol *p, struct symbol *c);
int arch__compare_symbol_names(const char *namea, const char *nameb);
int arch__compare_symbol_names_n(const char *namea, const char *nameb,
unsigned int n);
[ Upstream commit 77ce56e2bfaa64127ae5e23ef136c0168b818777 ]
Building with clang and KASAN, we get a warning about an overly large
stack frame on 32-bit architectures:
drivers/block/drbd/drbd_receiver.c:921:31: error: stack frame size of 1280 bytes in function 'conn_connect'
[-Werror,-Wframe-larger-than=]
We already allocate other data dynamically in this function, so
just do the same for the shash descriptor, which makes up most of
this memory.
Link: https://lore.kernel.org/lkml/[email protected]/
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Roland Kammerer <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/drbd/drbd_receiver.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index 1aad373da50e2..8fbdfaacc2226 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -5237,7 +5237,7 @@ static int drbd_do_auth(struct drbd_connection *connection)
unsigned int key_len;
char secret[SHARED_SECRET_MAX]; /* 64 byte */
unsigned int resp_size;
- SHASH_DESC_ON_STACK(desc, connection->cram_hmac_tfm);
+ struct shash_desc *desc;
struct packet_info pi;
struct net_conf *nc;
int err, rv;
@@ -5250,6 +5250,13 @@ static int drbd_do_auth(struct drbd_connection *connection)
memcpy(secret, nc->shared_secret, key_len);
rcu_read_unlock();
+ desc = kmalloc(sizeof(struct shash_desc) +
+ crypto_shash_descsize(connection->cram_hmac_tfm),
+ GFP_KERNEL);
+ if (!desc) {
+ rv = -1;
+ goto fail;
+ }
desc->tfm = connection->cram_hmac_tfm;
desc->flags = 0;
@@ -5392,7 +5399,10 @@ static int drbd_do_auth(struct drbd_connection *connection)
kfree(peers_ch);
kfree(response);
kfree(right_response);
- shash_desc_zero(desc);
+ if (desc) {
+ shash_desc_zero(desc);
+ kfree(desc);
+ }
return rv;
}
--
2.20.1
[ Upstream commit 79b2fe5e756163897175a8f57d66b26cd9befd59 ]
After Song Liu's segfault fix for pipe mode, Arnaldo reported following
error:
# perf record -o - | perf script
0x514 [0x1ac]: failed to process type: 80
It's caused by wrong buffer size setup in feature processing, which
makes cpu topology feature fail, because it's using buffer size to
recognize its header version.
Reported-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: David Carrillo-Cisneros <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Fixes: e9def1b2e74e ("perf tools: Add feature header record to pipe-mode")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/util/header.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index 26437143c9406..c892a28e7b048 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -3081,7 +3081,7 @@ int perf_event__process_feature(struct perf_tool *tool,
return 0;
ff.buf = (void *)fe->data;
- ff.size = event->header.size - sizeof(event->header);
+ ff.size = event->header.size - sizeof(*fe);
ff.ph = &session->header;
if (feat_ops[feat].process(&ff, NULL))
--
2.20.1
From: Kevin Hao <[email protected]>
commit b803974a86039913d5280add083d730b2b9ed8ec upstream.
This fixes the below calltrace when the CONFIG_DMA_API_DEBUG is enabled.
DMA-API: thunderx_mmc 0000:01:01.4: cpu touching an active dma mapped cacheline [cln=0x000000002fdf9800]
WARNING: CPU: 21 PID: 1 at kernel/dma/debug.c:596 debug_dma_assert_idle+0x1f8/0x270
Modules linked in:
CPU: 21 PID: 1 Comm: init Not tainted 5.3.0-rc1-next-20190725-yocto-standard+ #64
Hardware name: Marvell OcteonTX CN96XX board (DT)
pstate: 80400009 (Nzcv daif +PAN -UAO)
pc : debug_dma_assert_idle+0x1f8/0x270
lr : debug_dma_assert_idle+0x1f8/0x270
sp : ffff0000113cfc10
x29: ffff0000113cfc10 x28: 0000ffff8c880000
x27: ffff800bc72a0000 x26: ffff000010ff8000
x25: ffff000010ff8940 x24: ffff000010ff8968
x23: 0000000000000000 x22: ffff000010e83700
x21: ffff000010ea2000 x20: ffff000010e835c8
x19: ffff800bc2c73300 x18: ffffffffffffffff
x17: 0000000000000000 x16: 0000000000000000
x15: ffff000010e835c8 x14: 6d20616d64206576
x13: 69746361206e6120 x12: 676e696863756f74
x11: 20757063203a342e x10: 31303a31303a3030
x9 : 303020636d6d5f78 x8 : 3230303030303030
x7 : 00000000000002fd x6 : ffff000010fd57d0
x5 : 0000000000000000 x4 : ffff0000106c5210
x3 : 00000000ffffffff x2 : 0000800bee9c0000
x1 : 57d5843f4aa62800 x0 : 0000000000000000
Call trace:
debug_dma_assert_idle+0x1f8/0x270
wp_page_copy+0xb0/0x688
do_wp_page+0xa8/0x5b8
__handle_mm_fault+0x600/0xd00
handle_mm_fault+0x118/0x1e8
do_page_fault+0x200/0x500
do_mem_abort+0x50/0xb0
el0_da+0x20/0x24
---[ end trace a005534bd23e109f ]---
DMA-API: Mapped at:
debug_dma_map_sg+0x94/0x350
cvm_mmc_request+0x3c4/0x988
__mmc_start_request+0x9c/0x1f8
mmc_start_request+0x7c/0xb0
mmc_blk_mq_issue_rq+0x5c4/0x7b8
Signed-off-by: Kevin Hao <[email protected]>
Fixes: ba3869ff32e4 ("mmc: cavium: Add core MMC driver for Cavium SOCs")
Cc: [email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/cavium.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/mmc/host/cavium.c
+++ b/drivers/mmc/host/cavium.c
@@ -374,6 +374,7 @@ static int finish_dma_single(struct cvm_
{
data->bytes_xfered = data->blocks * data->blksz;
data->error = 0;
+ dma_unmap_sg(host->dev, data->sg, data->sg_len, get_dma_dir(data));
return 1;
}
From: Roderick Colenbrander <[email protected]>
commit e0f6974a54d3f7f1b5fdf5a593bd43ce9206ec04 upstream.
Valve reported a kernel crash on Ubuntu 18.04 when disconnecting a DS4
gamepad while rumble is enabled. This issue is reproducible with a
frequency of 1 in 3 times in the game Borderlands 2 when using an
automatic weapon, which triggers many rumble operations.
We found the issue to be a race condition between sony_remove and the
final device destruction by the HID / input system. The problem was
that sony_remove didn't clean some of its work_item state in
"struct sony_sc". After sony_remove work, the corresponding evdev
node was around for sufficient time for applications to still queue
rumble work after "sony_remove".
On pre-4.19 kernels the race condition caused a kernel crash due to a
NULL-pointer dereference as "sc->output_report_dmabuf" got freed during
sony_remove. On newer kernels this crash doesn't happen due the buffer
now being allocated using devm_kzalloc. However we can still queue work,
while the driver is an undefined state.
This patch fixes the described problem, by guarding the work_item
"state_worker" with an initialized variable, which we are setting back
to 0 on cleanup.
Signed-off-by: Roderick Colenbrander <[email protected]>
CC: [email protected]
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/hid-sony.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -578,10 +578,14 @@ static void sony_set_leds(struct sony_sc
static inline void sony_schedule_work(struct sony_sc *sc,
enum sony_worker which)
{
+ unsigned long flags;
+
switch (which) {
case SONY_WORKER_STATE:
- if (!sc->defer_initialization)
+ spin_lock_irqsave(&sc->lock, flags);
+ if (!sc->defer_initialization && sc->state_worker_initialized)
schedule_work(&sc->state_worker);
+ spin_unlock_irqrestore(&sc->lock, flags);
break;
case SONY_WORKER_HOTPLUG:
if (sc->hotplug_worker_initialized)
@@ -2488,13 +2492,18 @@ static inline void sony_init_output_repo
static inline void sony_cancel_work_sync(struct sony_sc *sc)
{
+ unsigned long flags;
+
if (sc->hotplug_worker_initialized)
cancel_work_sync(&sc->hotplug_worker);
- if (sc->state_worker_initialized)
+ if (sc->state_worker_initialized) {
+ spin_lock_irqsave(&sc->lock, flags);
+ sc->state_worker_initialized = 0;
+ spin_unlock_irqrestore(&sc->lock, flags);
cancel_work_sync(&sc->state_worker);
+ }
}
-
static int sony_input_configured(struct hid_device *hdev,
struct hid_input *hidinput)
{
From: Guenter Roeck <[email protected]>
commit 38ada2f406a9b81fb1249c5c9227fa657e7d5671 upstream.
The code to detect if in4 is present is wrong; if in4 is not present,
the in4_input sysfs attribute is still present.
In detail:
- Ihen RTD3_MD=11 (VSEN3 present), everything is as expected (no bug).
- If we have RTD3_MD!=11 (no VSEN3), we unexpectedly have a in4_input
file under /sys and the "sensors" command displays in4_input.
But as expected, we have no in4_min, in4_max, in4_alarm, in4_beep.
Fix is_visible function to detect and report in4_input visibility
as expected.
Reported-by: Gilles Buloz <[email protected]>
Cc: Gilles Buloz <[email protected]>
Cc: [email protected]
Fixes: 3434f37835804 ("hwmon: Driver for Nuvoton NCT7802Y")
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/nct7802.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/hwmon/nct7802.c
+++ b/drivers/hwmon/nct7802.c
@@ -768,7 +768,7 @@ static struct attribute *nct7802_in_attr
&sensor_dev_attr_in3_alarm.dev_attr.attr,
&sensor_dev_attr_in3_beep.dev_attr.attr,
- &sensor_dev_attr_in4_input.dev_attr.attr, /* 17 */
+ &sensor_dev_attr_in4_input.dev_attr.attr, /* 16 */
&sensor_dev_attr_in4_min.dev_attr.attr,
&sensor_dev_attr_in4_max.dev_attr.attr,
&sensor_dev_attr_in4_alarm.dev_attr.attr,
@@ -794,9 +794,9 @@ static umode_t nct7802_in_is_visible(str
if (index >= 6 && index < 11 && (reg & 0x03) != 0x03) /* VSEN1 */
return 0;
- if (index >= 11 && index < 17 && (reg & 0x0c) != 0x0c) /* VSEN2 */
+ if (index >= 11 && index < 16 && (reg & 0x0c) != 0x0c) /* VSEN2 */
return 0;
- if (index >= 17 && (reg & 0x30) != 0x30) /* VSEN3 */
+ if (index >= 16 && (reg & 0x30) != 0x30) /* VSEN3 */
return 0;
return attr->mode;
[ Upstream commit c1ab69268d124ebdbb3864580808188ccd3ea355 ]
So we don't call try to call vfio_unpin_pages() incorrectly.
Fixes: 0a19e61e6d4c ("vfio: ccw: introduce channel program interfaces")
Signed-off-by: Farhan Ali <[email protected]>
Reviewed-by: Eric Farman <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
Message-Id: <33a89467ad6369196ae6edf820cbcb1e2d8d050c.1562854091.git.alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/s390/cio/vfio_ccw_cp.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/s390/cio/vfio_ccw_cp.c b/drivers/s390/cio/vfio_ccw_cp.c
index 1419eaea03d84..5a9e457caef33 100644
--- a/drivers/s390/cio/vfio_ccw_cp.c
+++ b/drivers/s390/cio/vfio_ccw_cp.c
@@ -119,8 +119,10 @@ static int pfn_array_alloc_pin(struct pfn_array *pa, struct device *mdev,
sizeof(*pa->pa_iova_pfn) +
sizeof(*pa->pa_pfn),
GFP_KERNEL);
- if (unlikely(!pa->pa_iova_pfn))
+ if (unlikely(!pa->pa_iova_pfn)) {
+ pa->pa_nr = 0;
return -ENOMEM;
+ }
pa->pa_pfn = pa->pa_iova_pfn + pa->pa_nr;
ret = pfn_array_pin(pa, mdev);
--
2.20.1
From: Stanislav Lisovskiy <[email protected]>
commit 73a0ff0b30af79bf0303d557eb82f1d1945bb6ee upstream.
According to Bspec clock divisor registers in GeminiLake
should be initialized by shifting 1(<<) to amount of correspondent
divisor. While i915 was writing all this time that value as is.
Surprisingly that it by accident worked, until we met some issues
with Microtech Etab.
v2: Added Fixes tag and cc
v3: Added stable to cc as well.
Signed-off-by: Stanislav Lisovskiy <[email protected]>
Reviewed-by: Vandita Kulkarni <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108826
Fixes: bcc657004841 ("drm/i915/glk: Program txesc clock divider for GLK")
Cc: Deepak M <[email protected]>
Cc: Madhav Chauhan <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit ce52ad5dd52cfaf3398058384e0ff94134bbd89c)
Signed-off-by: Jani Nikula <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_dsi_pll.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/i915/intel_dsi_pll.c
+++ b/drivers/gpu/drm/i915/intel_dsi_pll.c
@@ -422,8 +422,8 @@ static void glk_dsi_program_esc_clock(st
else
txesc2_div = 10;
- I915_WRITE(MIPIO_TXESC_CLK_DIV1, txesc1_div & GLK_TX_ESC_CLK_DIV1_MASK);
- I915_WRITE(MIPIO_TXESC_CLK_DIV2, txesc2_div & GLK_TX_ESC_CLK_DIV2_MASK);
+ I915_WRITE(MIPIO_TXESC_CLK_DIV1, (1 << (txesc1_div - 1)) & GLK_TX_ESC_CLK_DIV1_MASK);
+ I915_WRITE(MIPIO_TXESC_CLK_DIV2, (1 << (txesc2_div - 1)) & GLK_TX_ESC_CLK_DIV2_MASK);
}
/* Program BXT Mipi clocks and dividers */
[ Upstream commit 28b1d6ef53e3303b90ca8924bb78f31fa527cafb ]
The rule below doesn't work as the kernel raises -ERANGE.
nft add rule netdev nftlb lb01 ip daddr set \
symhash mod 1 map { 0 : 192.168.0.10 } fwd to "eth0"
This patch allows to use the symhash modulus with one
element, in the same way that the other types of hashes and
algorithms that uses the modulus parameter.
Signed-off-by: Laura Garcia Liebana <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nft_hash.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/netfilter/nft_hash.c b/net/netfilter/nft_hash.c
index 24f2f7567ddb7..010a565b40001 100644
--- a/net/netfilter/nft_hash.c
+++ b/net/netfilter/nft_hash.c
@@ -131,7 +131,7 @@ static int nft_symhash_init(const struct nft_ctx *ctx,
priv->dreg = nft_parse_register(tb[NFTA_HASH_DREG]);
priv->modulus = ntohl(nla_get_be32(tb[NFTA_HASH_MODULUS]));
- if (priv->modulus <= 1)
+ if (priv->modulus < 1)
return -ERANGE;
if (priv->offset + priv->modulus - 1 < priv->offset)
--
2.20.1
From: Takashi Iwai <[email protected]>
commit c1c6c877b0c79fd7e05c931435aa42211eaeebaf upstream.
The commit bfcba288b97f ("ALSA - hda: Add support for link audio time
reporting") introduced the conditional PCM hw info setup, but it
overwrites the global azx_pcm_hw object. This will cause a problem if
any other HD-audio controller, as it'll inherit the same bit flag
although another controller doesn't support that feature.
Fix the bug by setting the PCM hw info flag locally.
Fixes: bfcba288b97f ("ALSA - hda: Add support for link audio time reporting")
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/hda_controller.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/sound/pci/hda/hda_controller.c
+++ b/sound/pci/hda/hda_controller.c
@@ -609,11 +609,9 @@ static int azx_pcm_open(struct snd_pcm_s
}
runtime->private_data = azx_dev;
- if (chip->gts_present)
- azx_pcm_hw.info = azx_pcm_hw.info |
- SNDRV_PCM_INFO_HAS_LINK_SYNCHRONIZED_ATIME;
-
runtime->hw = azx_pcm_hw;
+ if (chip->gts_present)
+ runtime->hw.info |= SNDRV_PCM_INFO_HAS_LINK_SYNCHRONIZED_ATIME;
runtime->hw.channels_min = hinfo->channels_min;
runtime->hw.channels_max = hinfo->channels_max;
runtime->hw.formats = hinfo->formats;
From: Takashi Iwai <[email protected]>
commit c02f77d32d2c45cfb1b2bb99eabd8a78f5ecc7db upstream.
A long-time problem on the recent AMD chip (X370, X470, B450, etc with
PCI ID 1022:1457) with Realtek codecs is the crackled or distorted
sound for capture streams, as well as occasional playback hiccups.
After lengthy debugging sessions, the workarounds we've found are like
the following:
- Set up the proper driver caps for this controller, similar as the
other AMD controller.
- Correct the DMA position reporting with the fixed FIFO size, which
is similar like as workaround used for VIA chip set.
- Even after the position correction, PulseAudio still shows
mysterious stalls of playback streams when a capture is triggered in
timer-scheduled mode. Since we have no clear way to eliminate the
stall, pass the BATCH PCM flag for PA to suppress the tsched mode as
a temporary workaround.
This patch implements the workarounds. For the driver caps, it
defines a new preset, AXZ_DCAPS_PRESET_AMD_SB. It enables the FIFO-
corrected position reporting (corresponding to the new position_fix=6)
and enforces the SNDRV_PCM_INFO_BATCH flag.
Note that the current implementation is merely a workaround.
Hopefully we'll find a better alternative in future, especially about
removing the BATCH flag hack again.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195303
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/hda_controller.c | 7 ++++
sound/pci/hda/hda_controller.h | 2 -
sound/pci/hda/hda_intel.c | 63 ++++++++++++++++++++++++++++++++++++++++-
3 files changed, 70 insertions(+), 2 deletions(-)
--- a/sound/pci/hda/hda_controller.c
+++ b/sound/pci/hda/hda_controller.c
@@ -624,6 +624,13 @@ static int azx_pcm_open(struct snd_pcm_s
20,
178000000);
+ /* by some reason, the playback stream stalls on PulseAudio with
+ * tsched=1 when a capture stream triggers. Until we figure out the
+ * real cause, disable tsched mode by telling the PCM info flag.
+ */
+ if (chip->driver_caps & AZX_DCAPS_AMD_WORKAROUND)
+ runtime->hw.info |= SNDRV_PCM_INFO_BATCH;
+
if (chip->align_buffer_size)
/* constrain buffer sizes to be multiple of 128
bytes. This is more efficient in terms of memory
--- a/sound/pci/hda/hda_controller.h
+++ b/sound/pci/hda/hda_controller.h
@@ -40,7 +40,7 @@
/* 14 unused */
#define AZX_DCAPS_CTX_WORKAROUND (1 << 15) /* X-Fi workaround */
#define AZX_DCAPS_POSFIX_LPIB (1 << 16) /* Use LPIB as default */
-/* 17 unused */
+#define AZX_DCAPS_AMD_WORKAROUND (1 << 17) /* AMD-specific workaround */
#define AZX_DCAPS_NO_64BIT (1 << 18) /* No 64bit address */
#define AZX_DCAPS_SYNC_WRITE (1 << 19) /* sync each cmd write */
#define AZX_DCAPS_OLD_SSYNC (1 << 20) /* Old SSYNC reg for ICH */
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -78,6 +78,7 @@ enum {
POS_FIX_VIACOMBO,
POS_FIX_COMBO,
POS_FIX_SKL,
+ POS_FIX_FIFO,
};
/* Defines for ATI HD Audio support in SB450 south bridge */
@@ -149,7 +150,7 @@ module_param_array(model, charp, NULL, 0
MODULE_PARM_DESC(model, "Use the given board model.");
module_param_array(position_fix, int, NULL, 0444);
MODULE_PARM_DESC(position_fix, "DMA pointer read method."
- "(-1 = system default, 0 = auto, 1 = LPIB, 2 = POSBUF, 3 = VIACOMBO, 4 = COMBO, 5 = SKL+).");
+ "(-1 = system default, 0 = auto, 1 = LPIB, 2 = POSBUF, 3 = VIACOMBO, 4 = COMBO, 5 = SKL+, 6 = FIFO).");
module_param_array(bdl_pos_adj, int, NULL, 0644);
MODULE_PARM_DESC(bdl_pos_adj, "BDL position adjustment offset.");
module_param_array(probe_mask, int, NULL, 0444);
@@ -350,6 +351,11 @@ enum {
#define AZX_DCAPS_PRESET_ATI_HDMI_NS \
(AZX_DCAPS_PRESET_ATI_HDMI | AZX_DCAPS_SNOOP_OFF)
+/* quirks for AMD SB */
+#define AZX_DCAPS_PRESET_AMD_SB \
+ (AZX_DCAPS_NO_TCSEL | AZX_DCAPS_SYNC_WRITE | AZX_DCAPS_AMD_WORKAROUND |\
+ AZX_DCAPS_SNOOP_TYPE(ATI) | AZX_DCAPS_PM_RUNTIME)
+
/* quirks for Nvidia */
#define AZX_DCAPS_PRESET_NVIDIA \
(AZX_DCAPS_NO_MSI | AZX_DCAPS_CORBRP_SELF_CLEAR |\
@@ -917,6 +923,49 @@ static unsigned int azx_via_get_position
return bound_pos + mod_dma_pos;
}
+#define AMD_FIFO_SIZE 32
+
+/* get the current DMA position with FIFO size correction */
+static unsigned int azx_get_pos_fifo(struct azx *chip, struct azx_dev *azx_dev)
+{
+ struct snd_pcm_substream *substream = azx_dev->core.substream;
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ unsigned int pos, delay;
+
+ pos = snd_hdac_stream_get_pos_lpib(azx_stream(azx_dev));
+ if (!runtime)
+ return pos;
+
+ runtime->delay = AMD_FIFO_SIZE;
+ delay = frames_to_bytes(runtime, AMD_FIFO_SIZE);
+ if (azx_dev->insufficient) {
+ if (pos < delay) {
+ delay = pos;
+ runtime->delay = bytes_to_frames(runtime, pos);
+ } else {
+ azx_dev->insufficient = 0;
+ }
+ }
+
+ /* correct the DMA position for capture stream */
+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
+ if (pos < delay)
+ pos += azx_dev->core.bufsize;
+ pos -= delay;
+ }
+
+ return pos;
+}
+
+static int azx_get_delay_from_fifo(struct azx *chip, struct azx_dev *azx_dev,
+ unsigned int pos)
+{
+ struct snd_pcm_substream *substream = azx_dev->core.substream;
+
+ /* just read back the calculated value in the above */
+ return substream->runtime->delay;
+}
+
static unsigned int azx_skl_get_dpib_pos(struct azx *chip,
struct azx_dev *azx_dev)
{
@@ -1484,6 +1533,7 @@ static int check_position_fix(struct azx
case POS_FIX_VIACOMBO:
case POS_FIX_COMBO:
case POS_FIX_SKL:
+ case POS_FIX_FIFO:
return fix;
}
@@ -1500,6 +1550,10 @@ static int check_position_fix(struct azx
dev_dbg(chip->card->dev, "Using VIACOMBO position fix\n");
return POS_FIX_VIACOMBO;
}
+ if (chip->driver_caps & AZX_DCAPS_AMD_WORKAROUND) {
+ dev_dbg(chip->card->dev, "Using FIFO position fix\n");
+ return POS_FIX_FIFO;
+ }
if (chip->driver_caps & AZX_DCAPS_POSFIX_LPIB) {
dev_dbg(chip->card->dev, "Using LPIB position fix\n");
return POS_FIX_LPIB;
@@ -1520,6 +1574,7 @@ static void assign_position_fix(struct a
[POS_FIX_VIACOMBO] = azx_via_get_position,
[POS_FIX_COMBO] = azx_get_pos_lpib,
[POS_FIX_SKL] = azx_get_pos_skl,
+ [POS_FIX_FIFO] = azx_get_pos_fifo,
};
chip->get_position[0] = chip->get_position[1] = callbacks[fix];
@@ -1534,6 +1589,9 @@ static void assign_position_fix(struct a
azx_get_delay_from_lpib;
}
+ if (fix == POS_FIX_FIFO)
+ chip->get_delay[0] = chip->get_delay[1] =
+ azx_get_delay_from_fifo;
}
/*
@@ -2516,6 +2574,9 @@ static const struct pci_device_id azx_id
/* AMD Hudson */
{ PCI_DEVICE(0x1022, 0x780d),
.driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_SB },
+ /* AMD, X370 & co */
+ { PCI_DEVICE(0x1022, 0x1457),
+ .driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_AMD_SB },
/* AMD Stoney */
{ PCI_DEVICE(0x1022, 0x157a),
.driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_SB |
From: Pavel Shilovsky <[email protected]>
commit e99c63e4d86d3a94818693147b469fa70de6f945 upstream.
Currently we skip SMB2_TREE_CONNECT command when checking during
reconnect because Tree Connect happens when establishing
an SMB session. For SMB 3.0 protocol version the code also calls
validate negotiate which results in SMB2_IOCL command being sent
over the wire. This may deadlock on trying to acquire a mutex when
checking for reconnect. Fix this by skipping SMB2_IOCL command
when doing the reconnect check.
Signed-off-by: Pavel Shilovsky <[email protected]>
Signed-off-by: Steve French <[email protected]>
Reviewed-by: Ronnie Sahlberg <[email protected]>
CC: Stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/smb2pdu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -166,7 +166,7 @@ smb2_reconnect(__le16 smb2_command, stru
if (tcon == NULL)
return 0;
- if (smb2_command == SMB2_TREE_CONNECT)
+ if (smb2_command == SMB2_TREE_CONNECT || smb2_command == SMB2_IOCTL)
return 0;
if (tcon->tidStatus == CifsExiting) {
[ Upstream commit 5a46d3f71d5e5a9f82eabc682f996f1281705ac7 ]
Static analysis identified that index comparison against ITS entries in
iort_dev_find_its_id() is off by one.
Update the comparison condition and clarify the resulting error
message.
Fixes: 4bf2efd26d76 ("ACPI: Add new IORT functions to support MSI domain handling")
Link: https://lore.kernel.org/linux-arm-kernel/20190613065410.GB16334@mwanda/
Reviewed-by: Hanjun Guo <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: Dan Carpenter <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Hanjun Guo <[email protected]>
Cc: Sudeep Holla <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Robin Murphy <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/arm64/iort.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index ca414910710ea..b0a7afd4e7d35 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -506,8 +506,8 @@ static int iort_dev_find_its_id(struct device *dev, u32 req_id,
/* Move to ITS specific data */
its = (struct acpi_iort_its_group *)node->node_data;
- if (idx > its->its_count) {
- dev_err(dev, "requested ITS ID index [%d] is greater than available [%d]\n",
+ if (idx >= its->its_count) {
+ dev_err(dev, "requested ITS ID index [%d] overruns ITS entries [%d]\n",
idx, its->its_count);
return -ENXIO;
}
--
2.20.1
[ Upstream commit e0a12445d1cb186d875410d093a00d215bec6a89 ]
The cpu variable is still being used in the of_get_property() call
after the of_node_put() call, which may result in use-after-free.
Fixes: a9acc26b75f6 ("cpufreq/pasemi: fix possible object reference leak")
Signed-off-by: Wen Yang <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cpufreq/pasemi-cpufreq.c | 23 +++++++++--------------
1 file changed, 9 insertions(+), 14 deletions(-)
diff --git a/drivers/cpufreq/pasemi-cpufreq.c b/drivers/cpufreq/pasemi-cpufreq.c
index 8456492124f0c..d1bdd8f622476 100644
--- a/drivers/cpufreq/pasemi-cpufreq.c
+++ b/drivers/cpufreq/pasemi-cpufreq.c
@@ -145,10 +145,18 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
int err = -ENODEV;
cpu = of_get_cpu_node(policy->cpu, NULL);
+ if (!cpu)
+ goto out;
+ max_freqp = of_get_property(cpu, "clock-frequency", NULL);
of_node_put(cpu);
- if (!cpu)
+ if (!max_freqp) {
+ err = -EINVAL;
goto out;
+ }
+
+ /* we need the freq in kHz */
+ max_freq = *max_freqp / 1000;
dn = of_find_compatible_node(NULL, NULL, "1682m-sdc");
if (!dn)
@@ -185,16 +193,6 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
}
pr_debug("init cpufreq on CPU %d\n", policy->cpu);
-
- max_freqp = of_get_property(cpu, "clock-frequency", NULL);
- if (!max_freqp) {
- err = -EINVAL;
- goto out_unmap_sdcpwr;
- }
-
- /* we need the freq in kHz */
- max_freq = *max_freqp / 1000;
-
pr_debug("max clock-frequency is at %u kHz\n", max_freq);
pr_debug("initializing frequency table\n");
@@ -212,9 +210,6 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
return cpufreq_generic_init(policy, pas_freqs, get_gizmo_latency());
-out_unmap_sdcpwr:
- iounmap(sdcpwr_mapbase);
-
out_unmap_sdcasr:
iounmap(sdcasr_mapbase);
out:
--
2.20.1
From: Trond Myklebust <[email protected]>
commit 991eedb1371dc09b0f9848f59c8898fe63d198c0 upstream.
Even then it isn't really necessary. The reason why we may not want to
pass in a stateid in other cases is that we cannot use the delegation
credential.
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/nfs4proc.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -2954,7 +2954,6 @@ static int _nfs4_do_setattr(struct inode
};
struct rpc_cred *delegation_cred = NULL;
unsigned long timestamp = jiffies;
- fmode_t fmode;
bool truncate;
int status;
@@ -2962,11 +2961,12 @@ static int _nfs4_do_setattr(struct inode
/* Servers should only apply open mode checks for file size changes */
truncate = (arg->iap->ia_valid & ATTR_SIZE) ? true : false;
- fmode = truncate ? FMODE_WRITE : FMODE_READ;
+ if (!truncate)
+ goto zero_stateid;
- if (nfs4_copy_delegation_stateid(inode, fmode, &arg->stateid, &delegation_cred)) {
+ if (nfs4_copy_delegation_stateid(inode, FMODE_WRITE, &arg->stateid, &delegation_cred)) {
/* Use that stateid */
- } else if (truncate && ctx != NULL) {
+ } else if (ctx != NULL) {
struct nfs_lock_context *l_ctx;
if (!nfs4_valid_open_stateid(ctx->state))
return -EBADF;
@@ -2978,8 +2978,10 @@ static int _nfs4_do_setattr(struct inode
nfs_put_lock_context(l_ctx);
if (status == -EIO)
return -EBADF;
- } else
+ } else {
+zero_stateid:
nfs4_stateid_copy(&arg->stateid, &zero_stateid);
+ }
if (delegation_cred)
msg.rpc_cred = delegation_cred;
From: Brian Norris <[email protected]>
commit df612421fe2566654047769c6852ffae1a31df16 upstream.
Commit 63d7ef36103d ("mwifiex: Don't abort on small, spec-compliant
vendor IEs") adjusted the ieee_types_vendor_header struct, which
inadvertently messed up the offsets used in
mwifiex_is_wpa_oui_present(). Add that offset back in, mirroring
mwifiex_is_rsn_oui_present().
As it stands, commit 63d7ef36103d breaks compatibility with WPA (not
WPA2) 802.11n networks, since we hit the "info: Disable 11n if AES is
not supported by AP" case in mwifiex_is_network_compatible().
Fixes: 63d7ef36103d ("mwifiex: Don't abort on small, spec-compliant vendor IEs")
Cc: <[email protected]>
Signed-off-by: Brian Norris <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/main.h | 1 +
drivers/net/wireless/marvell/mwifiex/scan.c | 3 ++-
2 files changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/marvell/mwifiex/main.h
+++ b/drivers/net/wireless/marvell/mwifiex/main.h
@@ -122,6 +122,7 @@ enum {
#define MWIFIEX_MAX_TOTAL_SCAN_TIME (MWIFIEX_TIMER_10S - MWIFIEX_TIMER_1S)
+#define WPA_GTK_OUI_OFFSET 2
#define RSN_GTK_OUI_OFFSET 2
#define MWIFIEX_OUI_NOT_PRESENT 0
--- a/drivers/net/wireless/marvell/mwifiex/scan.c
+++ b/drivers/net/wireless/marvell/mwifiex/scan.c
@@ -181,7 +181,8 @@ mwifiex_is_wpa_oui_present(struct mwifie
u8 ret = MWIFIEX_OUI_NOT_PRESENT;
if (has_vendor_hdr(bss_desc->bcn_wpa_ie, WLAN_EID_VENDOR_SPECIFIC)) {
- iebody = (struct ie_body *) bss_desc->bcn_wpa_ie->data;
+ iebody = (struct ie_body *)((u8 *)bss_desc->bcn_wpa_ie->data +
+ WPA_GTK_OUI_OFFSET);
oui = &mwifiex_wpa_oui[cipher][0];
ret = mwifiex_search_oui_in_ie(iebody, oui);
if (ret)
From: Wanpeng Li <[email protected]>
commit 17e433b54393a6269acbcb792da97791fe1592d8 upstream.
After commit d73eb57b80b (KVM: Boost vCPUs that are delivering interrupts), a
five years old bug is exposed. Running ebizzy benchmark in three 80 vCPUs VMs
on one 80 pCPUs Skylake server, a lot of rcu_sched stall warning splatting
in the VMs after stress testing:
INFO: rcu_sched detected stalls on CPUs/tasks: { 4 41 57 62 77} (detected by 15, t=60004 jiffies, g=899, c=898, q=15073)
Call Trace:
flush_tlb_mm_range+0x68/0x140
tlb_flush_mmu.part.75+0x37/0xe0
tlb_finish_mmu+0x55/0x60
zap_page_range+0x142/0x190
SyS_madvise+0x3cd/0x9c0
system_call_fastpath+0x1c/0x21
swait_active() sustains to be true before finish_swait() is called in
kvm_vcpu_block(), voluntarily preempted vCPUs are taken into account
by kvm_vcpu_on_spin() loop greatly increases the probability condition
kvm_arch_vcpu_runnable(vcpu) is checked and can be true, when APICv
is enabled the yield-candidate vCPU's VMCS RVI field leaks(by
vmx_sync_pir_to_irr()) into spinning-on-a-taken-lock vCPU's current
VMCS.
This patch fixes it by checking conservatively a subset of events.
Cc: Paolo Bonzini <[email protected]>
Cc: Radim Krčmář <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: [email protected]
Fixes: 98f4a1467 (KVM: add kvm_arch_vcpu_runnable() test to kvm_vcpu_on_spin() loop)
Signed-off-by: Wanpeng Li <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kvm/powerpc.c | 5 +++++
arch/x86/include/asm/kvm_host.h | 1 +
arch/x86/kvm/svm.c | 6 ++++++
arch/x86/kvm/vmx.c | 6 ++++++
arch/x86/kvm/x86.c | 16 ++++++++++++++++
include/linux/kvm_host.h | 1 +
virt/kvm/kvm_main.c | 25 ++++++++++++++++++++++++-
7 files changed, 59 insertions(+), 1 deletion(-)
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -58,6 +58,11 @@ int kvm_arch_vcpu_runnable(struct kvm_vc
return !!(v->arch.pending_exceptions) || kvm_request_pending(v);
}
+bool kvm_arch_dy_runnable(struct kvm_vcpu *vcpu)
+{
+ return kvm_arch_vcpu_runnable(vcpu);
+}
+
bool kvm_arch_vcpu_in_kernel(struct kvm_vcpu *vcpu)
{
return false;
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -1077,6 +1077,7 @@ struct kvm_x86_ops {
int (*update_pi_irte)(struct kvm *kvm, unsigned int host_irq,
uint32_t guest_irq, bool set);
void (*apicv_post_state_restore)(struct kvm_vcpu *vcpu);
+ bool (*dy_apicv_has_pending_interrupt)(struct kvm_vcpu *vcpu);
int (*set_hv_timer)(struct kvm_vcpu *vcpu, u64 guest_deadline_tsc);
void (*cancel_hv_timer)(struct kvm_vcpu *vcpu);
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -4637,6 +4637,11 @@ static void svm_deliver_avic_intr(struct
kvm_vcpu_wake_up(vcpu);
}
+static bool svm_dy_apicv_has_pending_interrupt(struct kvm_vcpu *vcpu)
+{
+ return false;
+}
+
static void svm_ir_list_del(struct vcpu_svm *svm, struct amd_iommu_pi_data *pi)
{
unsigned long flags;
@@ -5746,6 +5751,7 @@ static struct kvm_x86_ops svm_x86_ops __
.pmu_ops = &amd_pmu_ops,
.deliver_posted_interrupt = svm_deliver_avic_intr,
+ .dy_apicv_has_pending_interrupt = svm_dy_apicv_has_pending_interrupt,
.update_pi_irte = svm_update_pi_irte,
.setup_mce = svm_setup_mce,
};
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -9431,6 +9431,11 @@ static int vmx_sync_pir_to_irr(struct kv
return max_irr;
}
+static bool vmx_dy_apicv_has_pending_interrupt(struct kvm_vcpu *vcpu)
+{
+ return pi_test_on(vcpu_to_pi_desc(vcpu));
+}
+
static void vmx_load_eoi_exitmap(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap)
{
if (!kvm_vcpu_apicv_active(vcpu))
@@ -12756,6 +12761,7 @@ static struct kvm_x86_ops vmx_x86_ops __
.hwapic_isr_update = vmx_hwapic_isr_update,
.sync_pir_to_irr = vmx_sync_pir_to_irr,
.deliver_posted_interrupt = vmx_deliver_posted_interrupt,
+ .dy_apicv_has_pending_interrupt = vmx_dy_apicv_has_pending_interrupt,
.set_tss_addr = vmx_set_tss_addr,
.get_tdp_level = get_ept_level,
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -8711,6 +8711,22 @@ int kvm_arch_vcpu_runnable(struct kvm_vc
return kvm_vcpu_running(vcpu) || kvm_vcpu_has_events(vcpu);
}
+bool kvm_arch_dy_runnable(struct kvm_vcpu *vcpu)
+{
+ if (READ_ONCE(vcpu->arch.pv.pv_unhalted))
+ return true;
+
+ if (kvm_test_request(KVM_REQ_NMI, vcpu) ||
+ kvm_test_request(KVM_REQ_SMI, vcpu) ||
+ kvm_test_request(KVM_REQ_EVENT, vcpu))
+ return true;
+
+ if (vcpu->arch.apicv_active && kvm_x86_ops->dy_apicv_has_pending_interrupt(vcpu))
+ return true;
+
+ return false;
+}
+
bool kvm_arch_vcpu_in_kernel(struct kvm_vcpu *vcpu)
{
return vcpu->arch.preempted_in_kernel;
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -808,6 +808,7 @@ void kvm_arch_check_processor_compat(voi
int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu);
bool kvm_arch_vcpu_in_kernel(struct kvm_vcpu *vcpu);
int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu);
+bool kvm_arch_dy_runnable(struct kvm_vcpu *vcpu);
#ifndef __KVM_HAVE_ARCH_VM_ALLOC
static inline struct kvm *kvm_arch_alloc_vm(void)
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -2314,6 +2314,29 @@ static bool kvm_vcpu_eligible_for_direct
#endif
}
+/*
+ * Unlike kvm_arch_vcpu_runnable, this function is called outside
+ * a vcpu_load/vcpu_put pair. However, for most architectures
+ * kvm_arch_vcpu_runnable does not require vcpu_load.
+ */
+bool __weak kvm_arch_dy_runnable(struct kvm_vcpu *vcpu)
+{
+ return kvm_arch_vcpu_runnable(vcpu);
+}
+
+static bool vcpu_dy_runnable(struct kvm_vcpu *vcpu)
+{
+ if (kvm_arch_dy_runnable(vcpu))
+ return true;
+
+#ifdef CONFIG_KVM_ASYNC_PF
+ if (!list_empty_careful(&vcpu->async_pf.done))
+ return true;
+#endif
+
+ return false;
+}
+
void kvm_vcpu_on_spin(struct kvm_vcpu *me, bool yield_to_kernel_mode)
{
struct kvm *kvm = me->kvm;
@@ -2343,7 +2366,7 @@ void kvm_vcpu_on_spin(struct kvm_vcpu *m
continue;
if (vcpu == me)
continue;
- if (swait_active(&vcpu->wq) && !kvm_arch_vcpu_runnable(vcpu))
+ if (swait_active(&vcpu->wq) && !vcpu_dy_runnable(vcpu))
continue;
if (yield_to_kernel_mode && !kvm_arch_vcpu_in_kernel(vcpu))
continue;
From: Luca Coelho <[email protected]>
commit 39bd984c203e86f3109b49c2a2e20677c4d3ab65 upstream.
Firmware versions before 41 don't support the GEO_TX_POWER_LIMIT
command, and sending it to the firmware will cause a firmware crash.
We allow this via debugfs, so we need to return an error value in case
it's not supported.
This had already been fixed during init, when we send the command if
the ACPI WGDS table is present. Fix it also for the other,
userspace-triggered case.
Cc: [email protected]
Fixes: 7fe90e0e3d60 ("iwlwifi: mvm: refactor geo init")
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 22 +++++++++++++++-------
1 file changed, 15 insertions(+), 7 deletions(-)
--- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
@@ -912,6 +912,17 @@ int iwl_mvm_sar_select_profile(struct iw
return iwl_mvm_send_cmd_pdu(mvm, REDUCE_TX_POWER_CMD, 0, len, &cmd);
}
+static bool iwl_mvm_sar_geo_support(struct iwl_mvm *mvm)
+{
+ /*
+ * The GEO_TX_POWER_LIMIT command is not supported on earlier
+ * firmware versions. Unfortunately, we don't have a TLV API
+ * flag to rely on, so rely on the major version which is in
+ * the first byte of ucode_ver.
+ */
+ return IWL_UCODE_SERIAL(mvm->fw->ucode_ver) >= 41;
+}
+
int iwl_mvm_get_sar_geo_profile(struct iwl_mvm *mvm)
{
struct iwl_geo_tx_power_profiles_resp *resp;
@@ -927,6 +938,9 @@ int iwl_mvm_get_sar_geo_profile(struct i
.data = { &geo_cmd },
};
+ if (!iwl_mvm_sar_geo_support(mvm))
+ return -EOPNOTSUPP;
+
ret = iwl_mvm_send_cmd(mvm, &cmd);
if (ret) {
IWL_ERR(mvm, "Failed to get geographic profile info %d\n", ret);
@@ -952,13 +966,7 @@ static int iwl_mvm_sar_geo_init(struct i
int ret, i, j;
u16 cmd_wide_id = WIDE_ID(PHY_OPS_GROUP, GEO_TX_POWER_LIMIT);
- /*
- * This command is not supported on earlier firmware versions.
- * Unfortunately, we don't have a TLV API flag to rely on, so
- * rely on the major version which is in the first byte of
- * ucode_ver.
- */
- if (IWL_UCODE_SERIAL(mvm->fw->ucode_ver) < 41)
+ if (!iwl_mvm_sar_geo_support(mvm))
return 0;
ret = iwl_mvm_sar_get_wgds_table(mvm);
[ Upstream commit d64b212ea960db4276a1d8372bd98cb861dfcbb0 ]
When building a multiplatform kernel that includes armv4 support,
the default target CPU does not support the blx instruction,
which leads to a build failure:
arch/arm/mach-davinci/sleep.S: Assembler messages:
arch/arm/mach-davinci/sleep.S:56: Error: selected processor does not support `blx ip' in ARM mode
Add a .arch statement in the sources to make this file build.
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Sekhar Nori <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Olof Johansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-davinci/sleep.S | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S
index cd350dee4df37..efcd400b2abb3 100644
--- a/arch/arm/mach-davinci/sleep.S
+++ b/arch/arm/mach-davinci/sleep.S
@@ -37,6 +37,7 @@
#define DEEPSLEEP_SLEEPENABLE_BIT BIT(31)
.text
+ .arch armv5te
/*
* Move DaVinci into deep sleep state
*
--
2.20.1
[ Upstream commit 20122994e38aef0ae50555884d287adde6641c94 ]
Retrying immediately after we've received a 'transitioning' sense code is
pretty much pointless, we should always use a delay before retrying. So
ensure the default delay is applied before retrying.
Signed-off-by: Hannes Reinecke <[email protected]>
Tested-by: Zhangguanghui <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/device_handler/scsi_dh_alua.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 09c6a16fab93f..41f5f64101630 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -53,6 +53,7 @@
#define ALUA_FAILOVER_TIMEOUT 60
#define ALUA_FAILOVER_RETRIES 5
#define ALUA_RTPG_DELAY_MSECS 5
+#define ALUA_RTPG_RETRY_DELAY 2
/* device handler flags */
#define ALUA_OPTIMIZE_STPG 0x01
@@ -677,7 +678,7 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg)
case SCSI_ACCESS_STATE_TRANSITIONING:
if (time_before(jiffies, pg->expiry)) {
/* State transition, retry */
- pg->interval = 2;
+ pg->interval = ALUA_RTPG_RETRY_DELAY;
err = SCSI_DH_RETRY;
} else {
struct alua_dh_data *h;
@@ -802,6 +803,8 @@ static void alua_rtpg_work(struct work_struct *work)
spin_lock_irqsave(&pg->lock, flags);
pg->flags &= ~ALUA_PG_RUNNING;
pg->flags |= ALUA_PG_RUN_RTPG;
+ if (!pg->interval)
+ pg->interval = ALUA_RTPG_RETRY_DELAY;
spin_unlock_irqrestore(&pg->lock, flags);
queue_delayed_work(kaluad_wq, &pg->rtpg_work,
pg->interval * HZ);
@@ -813,6 +816,8 @@ static void alua_rtpg_work(struct work_struct *work)
spin_lock_irqsave(&pg->lock, flags);
if (err == SCSI_DH_RETRY || pg->flags & ALUA_PG_RUN_RTPG) {
pg->flags &= ~ALUA_PG_RUNNING;
+ if (!pg->interval && !(pg->flags & ALUA_PG_RUN_RTPG))
+ pg->interval = ALUA_RTPG_RETRY_DELAY;
pg->flags |= ALUA_PG_RUN_RTPG;
spin_unlock_irqrestore(&pg->lock, flags);
queue_delayed_work(kaluad_wq, &pg->rtpg_work,
--
2.20.1
From: Thomas Richter <[email protected]>
commit 12a6d2940b5f02b4b9f71ce098e3bb02bc24a9ea upstream.
On s390 the modules loaded in memory have the text segment located after
the GOT and Relocation table. This can be seen with this output:
[root@m35lp76 perf]# fgrep qeth /proc/modules
qeth 151552 1 qeth_l2, Live 0x000003ff800b2000
...
[root@m35lp76 perf]# cat /sys/module/qeth/sections/.text
0x000003ff800b3990
[root@m35lp76 perf]#
There is an offset of 0x1990 bytes. The size of the qeth module is
151552 bytes (0x25000 in hex).
The location of the GOT/relocation table at the beginning of a module is
unique to s390.
commit 203d8a4aa6ed ("perf s390: Fix 'start' address of module's map")
adjusts the start address of a module in the map structures, but does
not adjust the size of the modules. This leads to overlapping of module
maps as this example shows:
[root@m35lp76 perf] # ./perf report -D
0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x25000)
@ 0]: x /lib/modules/.../qeth.ko.xz
0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x8000)
@ 0]: x /lib/modules/.../ip6_tables.ko.xz
The module qeth.ko has an adjusted start address modified to b3990, but
its size is unchanged and the module ends at 0x3ff800d8990. This end
address overlaps with the next modules start address of 0x3ff800d85a0.
When the size of the leading GOT/Relocation table stored in the
beginning of the text segment (0x1990 bytes) is subtracted from module
qeth end address, there are no overlaps anymore:
0x3ff800d8990 - 0x1990 = 0x0x3ff800d7000
which is the same as
0x3ff800b2000 + 0x25000 = 0x0x3ff800d7000.
To fix this issue, also adjust the modules size in function
arch__fix_module_text_start(). Add another function parameter named size
and reduce the size of the module when the text segment start address is
changed.
Output after:
0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x23670)
@ 0]: x /lib/modules/.../qeth.ko.xz
0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x7a60)
@ 0]: x /lib/modules/.../ip6_tables.ko.xz
Reported-by: Stefan Liebler <[email protected]>
Signed-off-by: Thomas Richter <[email protected]>
Acked-by: Heiko Carstens <[email protected]>
Cc: Hendrik Brueckner <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: [email protected]
Fixes: 203d8a4aa6ed ("perf s390: Fix 'start' address of module's map")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/arch/s390/util/machine.c | 14 +++++++++++++-
tools/perf/util/machine.c | 3 ++-
tools/perf/util/machine.h | 2 +-
3 files changed, 16 insertions(+), 3 deletions(-)
--- a/tools/perf/arch/s390/util/machine.c
+++ b/tools/perf/arch/s390/util/machine.c
@@ -8,7 +8,7 @@
#include "debug.h"
#include "symbol.h"
-int arch__fix_module_text_start(u64 *start, const char *name)
+int arch__fix_module_text_start(u64 *start, u64 *size, const char *name)
{
u64 m_start = *start;
char path[PATH_MAX];
@@ -18,6 +18,18 @@ int arch__fix_module_text_start(u64 *sta
if (sysfs__read_ull(path, (unsigned long long *)start) < 0) {
pr_debug2("Using module %s start:%#lx\n", path, m_start);
*start = m_start;
+ } else {
+ /* Successful read of the modules segment text start address.
+ * Calculate difference between module start address
+ * in memory and module text segment start address.
+ * For example module load address is 0x3ff8011b000
+ * (from /proc/modules) and module text segment start
+ * address is 0x3ff8011b870 (from file above).
+ *
+ * Adjust the module size and subtract the GOT table
+ * size located at the beginning of the module.
+ */
+ *size -= (*start - m_start);
}
return 0;
--- a/tools/perf/util/machine.c
+++ b/tools/perf/util/machine.c
@@ -1233,6 +1233,7 @@ static int machine__set_modules_path(str
return map_groups__set_modules_path_dir(&machine->kmaps, modules_path, 0);
}
int __weak arch__fix_module_text_start(u64 *start __maybe_unused,
+ u64 *size __maybe_unused,
const char *name __maybe_unused)
{
return 0;
@@ -1244,7 +1245,7 @@ static int machine__create_module(void *
struct machine *machine = arg;
struct map *map;
- if (arch__fix_module_text_start(&start, name) < 0)
+ if (arch__fix_module_text_start(&start, &size, name) < 0)
return -1;
map = machine__findnew_module_map(machine, start, name);
--- a/tools/perf/util/machine.h
+++ b/tools/perf/util/machine.h
@@ -213,7 +213,7 @@ struct symbol *machine__find_kernel_func
struct map *machine__findnew_module_map(struct machine *machine, u64 start,
const char *filename);
-int arch__fix_module_text_start(u64 *start, const char *name);
+int arch__fix_module_text_start(u64 *start, u64 *size, const char *name);
int __machine__load_kallsyms(struct machine *machine, const char *filename,
enum map_type type, bool no_kcore);
[ Upstream commit 952041a8639a7a3a73a2b6573cb8aa8518bc39f8 ]
While reviewing rwsem down_slowpath, Will noticed ldsem had a copy of
a bug we just found for rwsem.
X = 0;
CPU0 CPU1
rwsem_down_read()
for (;;) {
set_current_state(TASK_UNINTERRUPTIBLE);
X = 1;
rwsem_up_write();
rwsem_mark_wake()
atomic_long_add(adjustment, &sem->count);
smp_store_release(&waiter->task, NULL);
if (!waiter.task)
break;
...
}
r = X;
Allows 'r == 0'.
Reported-by: Will Deacon <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Will Deacon <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Hurley <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Fixes: 4898e640caf0 ("tty: Add timed, writer-prioritized rw semaphore")
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/tty_ldsem.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/tty_ldsem.c b/drivers/tty/tty_ldsem.c
index 5c2cec298816b..c6ce34161281a 100644
--- a/drivers/tty/tty_ldsem.c
+++ b/drivers/tty/tty_ldsem.c
@@ -139,8 +139,7 @@ static void __ldsem_wake_readers(struct ld_semaphore *sem)
list_for_each_entry_safe(waiter, next, &sem->read_wait, list) {
tsk = waiter->task;
- smp_mb();
- waiter->task = NULL;
+ smp_store_release(&waiter->task, NULL);
wake_up_process(tsk);
put_task_struct(tsk);
}
@@ -235,7 +234,7 @@ down_read_failed(struct ld_semaphore *sem, long count, long timeout)
for (;;) {
set_current_state(TASK_UNINTERRUPTIBLE);
- if (!waiter.task)
+ if (!smp_load_acquire(&waiter.task))
break;
if (!timeout)
break;
--
2.20.1
[ Upstream commit 4ce54af8b33d3e21ca935fc1b89b58cbba956051 ]
Some hardware PMU drivers will override perf_event.cpu inside their
event_init callback. This causes a lockdep splat when initialized through
the kernel API:
WARNING: CPU: 0 PID: 250 at kernel/events/core.c:2917 ctx_sched_out+0x78/0x208
pc : ctx_sched_out+0x78/0x208
Call trace:
ctx_sched_out+0x78/0x208
__perf_install_in_context+0x160/0x248
remote_function+0x58/0x68
generic_exec_single+0x100/0x180
smp_call_function_single+0x174/0x1b8
perf_install_in_context+0x178/0x188
perf_event_create_kernel_counter+0x118/0x160
Fix this by calling perf_install_in_context with event->cpu, just like
perf_event_open
Signed-off-by: Leonard Crestez <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Mark Rutland <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Frank Li <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lkml.kernel.org/r/c4ebe0503623066896d7046def4d6b1e06e0eb2e.1563972056.git.leonard.crestez@nxp.com
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/events/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 3d4eb6f840eba..ea4f3f7a0c6f3 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -10474,7 +10474,7 @@ perf_event_create_kernel_counter(struct perf_event_attr *attr, int cpu,
goto err_unlock;
}
- perf_install_in_context(ctx, event, cpu);
+ perf_install_in_context(ctx, event, event->cpu);
perf_unpin_context(ctx);
mutex_unlock(&ctx->mutex);
--
2.20.1
[ Upstream commit d95daf5accf4a72005daa13fbb1d1bd8709f2861 ]
When perf_add_probe_events() we call cleanup_perf_probe_events() for the
pev pointer it receives, then, as part of handling this failure the main
'perf probe' goes on and calls cleanup_params() and that will again call
cleanup_perf_probe_events()for the same pointer, so just set nevents to
zero when handling the failure of perf_add_probe_events() to avoid the
double free.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/builtin-probe.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/tools/perf/builtin-probe.c b/tools/perf/builtin-probe.c
index c0065923a525f..e1ac51aaedcff 100644
--- a/tools/perf/builtin-probe.c
+++ b/tools/perf/builtin-probe.c
@@ -712,6 +712,16 @@ __cmd_probe(int argc, const char **argv)
ret = perf_add_probe_events(params.events, params.nevents);
if (ret < 0) {
+
+ /*
+ * When perf_add_probe_events() fails it calls
+ * cleanup_perf_probe_events(pevs, npevs), i.e.
+ * cleanup_perf_probe_events(params.events, params.nevents), which
+ * will call clear_perf_probe_event(), so set nevents to zero
+ * to avoid cleanup_params() to call clear_perf_probe_event() again
+ * on the same pevs.
+ */
+ params.nevents = 0;
pr_err_with_code(" Error: Failed to add events.", ret);
return ret;
}
--
2.20.1
From: Tomas Bortoli <[email protected]>
commit ead16e53c2f0ed946d82d4037c630e2f60f4ab69 upstream.
Uninitialized Kernel memory can leak to USB devices.
Fix by using kzalloc() instead of kmalloc() on the affected buffers.
Signed-off-by: Tomas Bortoli <[email protected]>
Reported-by: [email protected]
Fixes: f14e22435a27 ("net: can: peak_usb: Do not do dma on the stack")
Cc: linux-stable <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
@@ -500,7 +500,7 @@ static int pcan_usb_pro_drv_loaded(struc
u8 *buffer;
int err;
- buffer = kmalloc(PCAN_USBPRO_FCT_DRVLD_REQ_LEN, GFP_KERNEL);
+ buffer = kzalloc(PCAN_USBPRO_FCT_DRVLD_REQ_LEN, GFP_KERNEL);
if (!buffer)
return -ENOMEM;
[ Upstream commit 5578257ca0e21056821e6481bd534ba267b84e58 ]
While removing an ibmvfc client adapter a WARN_ON like the following
WARN_ON is seen in the kernel log:
WARNING: CPU: 6 PID: 5421 at ./include/linux/dma-mapping.h:541
ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc]
CPU: 6 PID: 5421 Comm: rmmod Tainted: G E 4.17.0-rc1-next-20180419-autotest #1
NIP: d00000000290328c LR: d00000000290325c CTR: c00000000036ee20
REGS: c000000288d1b7e0 TRAP: 0700 Tainted: G E (4.17.0-rc1-next-20180419-autotest)
MSR: 800000010282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 44008828 XER: 20000000
CFAR: c00000000036e408 SOFTE: 1
GPR00: d00000000290325c c000000288d1ba60 d000000002917900 c000000289d75448
GPR04: 0000000000000071 c0000000ff870000 0000000018040000 0000000000000001
GPR08: 0000000000000000 c00000000156e838 0000000000000001 d00000000290c640
GPR12: c00000000036ee20 c00000001ec4dc00 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 00000100276901e0 0000000010020598
GPR20: 0000000010020550 0000000010020538 0000000010020578 00000000100205b0
GPR24: 0000000000000000 0000000000000000 0000000010020590 5deadbeef0000100
GPR28: 5deadbeef0000200 d000000002910b00 0000000000000071 c0000002822f87d8
NIP [d00000000290328c] ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc]
LR [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc]
Call Trace:
[c000000288d1ba60] [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc] (unreliable)
[c000000288d1baf0] [d000000002909390] ibmvfc_abort_task_set+0x7b0/0x8b0 [ibmvfc]
[c000000288d1bb70] [c0000000000d8c68] vio_bus_remove+0x68/0x100
[c000000288d1bbb0] [c0000000007da7c4] device_release_driver_internal+0x1f4/0x2d0
[c000000288d1bc00] [c0000000007da95c] driver_detach+0x7c/0x100
[c000000288d1bc40] [c0000000007d8af4] bus_remove_driver+0x84/0x140
[c000000288d1bcb0] [c0000000007db6ac] driver_unregister+0x4c/0xa0
[c000000288d1bd20] [c0000000000d6e7c] vio_unregister_driver+0x2c/0x50
[c000000288d1bd50] [d00000000290ba0c] cleanup_module+0x24/0x15e0 [ibmvfc]
[c000000288d1bd70] [c0000000001dadb0] sys_delete_module+0x220/0x2d0
[c000000288d1be30] [c00000000000b284] system_call+0x58/0x6c
Instruction dump:
e8410018 e87f0068 809f0078 e8bf0080 e8df0088 2fa30000 419e008c e9230200
2fa90000 419e0080 894d098a 794a07e0 <0b0a0000> e9290008 2fa90000 419e0028
This is tripped as a result of irqs being disabled during the call to
dma_free_coherent() by ibmvfc_free_event_pool(). At this point in the code path
we have quiesced the adapter and its overly paranoid anyways to be holding the
host lock.
Reported-by: Abdul Haleem <[email protected]>
Signed-off-by: Tyrel Datwyler <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index a06b24a61622c..34612add3829f 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -4876,8 +4876,8 @@ static int ibmvfc_remove(struct vio_dev *vdev)
spin_lock_irqsave(vhost->host->host_lock, flags);
ibmvfc_purge_requests(vhost, DID_ERROR);
- ibmvfc_free_event_pool(vhost);
spin_unlock_irqrestore(vhost->host->host_lock, flags);
+ ibmvfc_free_event_pool(vhost);
ibmvfc_free_mem(vhost);
spin_lock(&ibmvfc_driver_lock);
--
2.20.1
From: Emmanuel Grumbach <[email protected]>
commit 87e7e25aee6b59fef740856f4e86d4b60496c9e1 upstream.
In order to remember how to unmap a memory (as single or
as page), we maintain a bit per Transmit Buffer (TBs) in
the meta data (structure iwl_cmd_meta).
We maintain a bitmap: 1 bit per TB.
If the TB is set, we will free the memory as a page.
This bitmap was never cleared. Fix this.
Cc: [email protected]
Fixes: 3cd1980b0cdf ("iwlwifi: pcie: introduce new tfd and tb formats")
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/pcie/tx.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/wireless/intel/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/tx.c
@@ -401,6 +401,8 @@ static void iwl_pcie_tfd_unmap(struct iw
DMA_TO_DEVICE);
}
+ meta->tbs = 0;
+
if (trans->cfg->use_tfh) {
struct iwl_tfh_tfd *tfd_fh = (void *)tfd;
From: Emmanuel Grumbach <[email protected]>
commit ba3224db78034435e9ff0247277cce7c7bb1756c upstream.
The index for the elements of the ACPI object we dereference
was static. This means that if we called the function twice
we wouldn't start from 3 again, but rather from the latest
index we reached in the previous call.
This was dutifully reported by KASAN.
Fix this.
Cc: [email protected]
Fixes: 6996490501ed ("iwlwifi: mvm: add support for EWRD (Dynamic SAR) ACPI table")
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
@@ -778,7 +778,7 @@ static int iwl_mvm_sar_get_ewrd_table(st
for (i = 0; i < n_profiles; i++) {
/* the tables start at element 3 */
- static int pos = 3;
+ int pos = 3;
/* The EWRD profiles officially go from 2 to 4, but we
* save them in sar_profiles[1-3] (because we don't
From: Luca Coelho <[email protected]>
commit f5a47fae6aa3eb06f100e701d2342ee56b857bee upstream.
We erroneously added a check for FW API version 41 before sending
GEO_TX_POWER_LIMIT, but this was already implemented in version 38.
Additionally, it was cherry-picked to older versions, namely 17, 26
and 29, so check for those as well.
Cc: [email protected]
Fixes: eca1e56ceedd ("iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT to old firmwares")
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
@@ -918,9 +918,14 @@ static bool iwl_mvm_sar_geo_support(stru
* The GEO_TX_POWER_LIMIT command is not supported on earlier
* firmware versions. Unfortunately, we don't have a TLV API
* flag to rely on, so rely on the major version which is in
- * the first byte of ucode_ver.
+ * the first byte of ucode_ver. This was implemented
+ * initially on version 38 and then backported to 36, 29 and
+ * 17.
*/
- return IWL_UCODE_SERIAL(mvm->fw->ucode_ver) >= 41;
+ return IWL_UCODE_SERIAL(mvm->fw->ucode_ver) >= 38 ||
+ IWL_UCODE_SERIAL(mvm->fw->ucode_ver) == 36 ||
+ IWL_UCODE_SERIAL(mvm->fw->ucode_ver) == 29 ||
+ IWL_UCODE_SERIAL(mvm->fw->ucode_ver) == 17;
}
int iwl_mvm_get_sar_geo_profile(struct iwl_mvm *mvm)
[ Upstream commit 3b5f307ef3cb5022bfe3c8ca5b8f2114d5bf6c29 ]
While loading fw crashdump in function fw_crash_buffer_show(), left bytes
in one dma chunk was not checked, if copying size over it, overflow access
will cause kernel panic.
Signed-off-by: Junxiao Bi <[email protected]>
Acked-by: Sumit Saxena <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/megaraid/megaraid_sas_base.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 73acd3e9ded75..8595d83229b77 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -2976,6 +2976,7 @@ megasas_fw_crash_buffer_show(struct device *cdev,
u32 size;
unsigned long buff_addr;
unsigned long dmachunk = CRASH_DMA_BUF_SIZE;
+ unsigned long chunk_left_bytes;
unsigned long src_addr;
unsigned long flags;
u32 buff_offset;
@@ -3001,6 +3002,8 @@ megasas_fw_crash_buffer_show(struct device *cdev,
}
size = (instance->fw_crash_buffer_size * dmachunk) - buff_offset;
+ chunk_left_bytes = dmachunk - (buff_offset % dmachunk);
+ size = (size > chunk_left_bytes) ? chunk_left_bytes : size;
size = (size >= PAGE_SIZE) ? (PAGE_SIZE - 1) : size;
src_addr = (unsigned long)instance->crash_buf[buff_offset / dmachunk] +
--
2.20.1
From: Steve French <[email protected]>
commit 8d33096a460d5b9bd13300f01615df5bb454db10 upstream.
We had a report of a server which did not do a DFS referral
because the session setup Capabilities field was set to 0
(unlike negotiate protocol where we set CAP_DFS). Better to
send it session setup in the capabilities as well (this also
more closely matches Windows client behavior).
Signed-off-by: Steve French <[email protected]>
Reviewed-off-by: Ronnie Sahlberg <[email protected]>
Reviewed-by: Pavel Shilovsky <[email protected]>
CC: Stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/smb2pdu.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -834,7 +834,12 @@ SMB2_sess_alloc_buffer(struct SMB2_sess_
else
req->SecurityMode = 0;
+#ifdef CONFIG_CIFS_DFS_UPCALL
+ req->Capabilities = cpu_to_le32(SMB2_GLOBAL_CAP_DFS);
+#else
req->Capabilities = 0;
+#endif /* DFS_UPCALL */
+
req->Channel = 0; /* MBZ */
sess_data->iov[0].iov_base = (char *)req;
From: Brian Norris <[email protected]>
commit 05aaa5c97dce4c10a9e7eae2f1569a684e0c5ced upstream.
In a very similar spirit to commit c470bdc1aaf3 ("mac80211: don't WARN
on bad WMM parameters from buggy APs"), an AP may not transmit a
fully-formed WMM IE. For example, it may miss or repeat an Access
Category. The above loop won't catch that and will instead leave one of
the four ACs zeroed out. This triggers the following warning in
drv_conf_tx()
wlan0: invalid CW_min/CW_max: 0/0
and it may leave one of the hardware queues unconfigured. If we detect
such a case, let's just print a warning and fall back to the defaults.
Tested with a hacked version of hostapd, intentionally corrupting the
IEs in hostapd_eid_wmm().
Cc: [email protected]
Signed-off-by: Brian Norris <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/mlme.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1867,6 +1867,16 @@ static bool ieee80211_sta_wmm_params(str
}
}
+ /* WMM specification requires all 4 ACIs. */
+ for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
+ if (params[ac].cw_min == 0) {
+ sdata_info(sdata,
+ "AP has invalid WMM params (missing AC %d), using defaults\n",
+ ac);
+ return false;
+ }
+ }
+
for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
mlme_dbg(sdata,
"WMM AC=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n",
From: Wenwen Wang <[email protected]>
commit 1be3c1fae6c1e1f5bb982b255d2034034454527a upstream.
In iso_packets_buffer_init(), 'b->packets' is allocated through
kmalloc_array(). Then, the aligned packet size is checked. If it is
larger than PAGE_SIZE, -EINVAL will be returned to indicate the error.
However, the allocated 'b->packets' is not deallocated on this path,
leading to a memory leak.
To fix the above issue, free 'b->packets' before returning the error code.
Fixes: 31ef9134eb52 ("ALSA: add LaCie FireWire Speakers/Griffin FireWave Surround driver")
Signed-off-by: Wenwen Wang <[email protected]>
Reviewed-by: Takashi Sakamoto <[email protected]>
Cc: <[email protected]> # v2.6.39+
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/firewire/packets-buffer.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/firewire/packets-buffer.c
+++ b/sound/firewire/packets-buffer.c
@@ -37,7 +37,7 @@ int iso_packets_buffer_init(struct iso_p
packets_per_page = PAGE_SIZE / packet_size;
if (WARN_ON(!packets_per_page)) {
err = -EINVAL;
- goto error;
+ goto err_packets;
}
pages = DIV_ROUND_UP(count, packets_per_page);
[ Upstream commit d4fddac5a51c378c5d3e68658816c37132611e1f ]
In test_firmware_init(), the buffer pointed to by the global pointer
'test_fw_config' is allocated through kzalloc(). Then, the buffer is
initialized in __test_firmware_config_init(). In the case that the
initialization fails, the following execution in test_firmware_init() needs
to be terminated with an error code returned to indicate this failure.
However, the allocated buffer is not freed on this execution path, leading
to a memory leak bug.
To fix the above issue, free the allocated buffer before returning from
test_firmware_init().
Signed-off-by: Wenwen Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/test_firmware.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/lib/test_firmware.c b/lib/test_firmware.c
index f978aebe60c5b..2e5e18bbfd28e 100644
--- a/lib/test_firmware.c
+++ b/lib/test_firmware.c
@@ -895,8 +895,11 @@ static int __init test_firmware_init(void)
return -ENOMEM;
rc = __test_firmware_config_init();
- if (rc)
+ if (rc) {
+ kfree(test_fw_config);
+ pr_err("could not init firmware test config: %d\n", rc);
return rc;
+ }
rc = misc_register(&test_fw_misc_device);
if (rc) {
--
2.20.1
From: Adrian Hunter <[email protected]>
commit 3de7ae0b2a1d86dbb23d0cb135150534fdb2e836 upstream.
Threads synthesized from /proc have comms with a start time of zero, and
not marked as "exec". Currently, there can be 2 such comms. The first is
created by processing a synthesized fork event and is set to the
parent's comm string, and the second by processing a synthesized comm
event set to the thread's current comm string.
In the absence of an "exec" comm, thread__exec_comm() picks the last
(oldest) comm, which, in the case above, is the parent's comm string.
For a main thread, that is very probably wrong. Use the second-to-last
in that case.
This affects only db-export because it is the only user of
thread__exec_comm().
Example:
$ sudo perf record -a -o pt-a-sleep-1 -e intel_pt//u -- sleep 1
$ sudo chown ahunter pt-a-sleep-1
Before:
$ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1.db branches calls
$ sqlite3 -header -column pt-a-sleep-1.db 'select * from comm_threads_view'
comm_id command thread_id pid tid
---------- ---------- ---------- ---------- ----------
1 swapper 1 0 0
2 rcu_sched 2 10 10
3 kthreadd 3 78 78
5 sudo 4 15180 15180
5 sudo 5 15180 15182
7 kworker/4: 6 10335 10335
8 kthreadd 7 55 55
10 systemd 8 865 865
10 systemd 9 865 875
13 perf 10 15181 15181
15 sleep 10 15181 15181
16 kworker/3: 11 14179 14179
17 kthreadd 12 29376 29376
19 systemd 13 746 746
21 systemd 14 401 401
23 systemd 15 879 879
23 systemd 16 879 945
25 kthreadd 17 556 556
27 kworker/u1 18 14136 14136
28 kworker/u1 19 15021 15021
29 kthreadd 20 509 509
31 systemd 21 836 836
31 systemd 22 836 967
33 systemd 23 1148 1148
33 systemd 24 1148 1163
35 kworker/2: 25 17988 17988
36 kworker/0: 26 13478 13478
After:
$ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1b.db branches calls
$ sqlite3 -header -column pt-a-sleep-1b.db 'select * from comm_threads_view'
comm_id command thread_id pid tid
---------- ---------- ---------- ---------- ----------
1 swapper 1 0 0
2 rcu_sched 2 10 10
3 kswapd0 3 78 78
4 perf 4 15180 15180
4 perf 5 15180 15182
6 kworker/4: 6 10335 10335
7 kcompactd0 7 55 55
8 accounts-d 8 865 865
8 accounts-d 9 865 875
10 perf 10 15181 15181
12 sleep 10 15181 15181
13 kworker/3: 11 14179 14179
14 kworker/1: 12 29376 29376
15 haveged 13 746 746
16 systemd-jo 14 401 401
17 NetworkMan 15 879 879
17 NetworkMan 16 879 945
19 irq/131-iw 17 556 556
20 kworker/u1 18 14136 14136
21 kworker/u1 19 15021 15021
22 kworker/u1 20 509 509
23 thermald 21 836 836
23 thermald 22 836 967
25 unity-sett 23 1148 1148
25 unity-sett 24 1148 1163
27 kworker/2: 25 17988 17988
28 kworker/0: 26 13478 13478
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected]
Fixes: 65de51f93ebf ("perf tools: Identify which comms are from exec")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/thread.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
--- a/tools/perf/util/thread.c
+++ b/tools/perf/util/thread.c
@@ -160,14 +160,24 @@ struct comm *thread__comm(const struct t
struct comm *thread__exec_comm(const struct thread *thread)
{
- struct comm *comm, *last = NULL;
+ struct comm *comm, *last = NULL, *second_last = NULL;
list_for_each_entry(comm, &thread->comm_list, list) {
if (comm->exec)
return comm;
+ second_last = last;
last = comm;
}
+ /*
+ * 'last' with no start time might be the parent's comm of a synthesized
+ * thread (created by processing a synthesized fork event). For a main
+ * thread, that is very probably wrong. Prefer a later comm to avoid
+ * that case.
+ */
+ if (second_last && !last->start && thread->pid_ == thread->tid)
+ return second_last;
+
return last;
}
From: Joerg Roedel <[email protected]>
commit 3f8fd02b1bf1d7ba964485a56f2f4b53ae88c167 upstream.
On x86-32 with PTI enabled, parts of the kernel page-tables are not shared
between processes. This can cause mappings in the vmalloc/ioremap area to
persist in some page-tables after the region is unmapped and released.
When the region is re-used the processes with the old mappings do not fault
in the new mappings but still access the old ones.
This causes undefined behavior, in reality often data corruption, kernel
oopses and panics and even spontaneous reboots.
Fix this problem by activly syncing unmaps in the vmalloc/ioremap area to
all page-tables in the system before the regions can be re-used.
Fixes: 5d72b4fba40ef ('x86, mm: support huge I/O mapping capability I/F')
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Dave Hansen <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/vmalloc.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -1766,6 +1766,12 @@ void *__vmalloc_node_range(unsigned long
return NULL;
/*
+ * First make sure the mappings are removed from all page-tables
+ * before they are freed.
+ */
+ vmalloc_sync_all();
+
+ /*
* In this function, newly allocated vm_struct has VM_UNINITIALIZED
* flag. It means that vm_struct is not fully initialized.
* Now, it is fully initialized, so remove this flag here.
@@ -2314,6 +2320,9 @@ EXPORT_SYMBOL(remap_vmalloc_range);
/*
* Implement a stub for vmalloc_sync_all() if the architecture chose not to
* have one.
+ *
+ * The purpose of this function is to make sure the vmalloc area
+ * mappings are identical in all page-tables in the system.
*/
void __weak vmalloc_sync_all(void)
{
From: Yoshihiro Shimoda <[email protected]>
commit 783bda5e41acc71f98336e1a402c180f9748e5dc upstream.
When a USB device is connected to the host controller and
the system enters suspend, the following error happens
in xhci_suspend():
xhci-hcd ee000000.usb: WARN: xHC CMD_RUN timeout
Since the firmware/internal CPU control the USBSTS.STS_HALT
and the process speed is down when the roothub port enters U3,
long delay for the handshake of STS_HALT is neeed in xhci_suspend().
So, this patch adds to set the XHCI_SLOW_SUSPEND.
Fixes: 435cc1138ec9 ("usb: host: xhci-plat: set resume_quirk() for R-Car controllers")
Cc: <[email protected]> # v4.12+
Signed-off-by: Yoshihiro Shimoda <[email protected]>
Link: https://lore.kernel.org/r/1564734815-17964-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-rcar.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -231,10 +231,15 @@ int xhci_rcar_init_quirk(struct usb_hcd
* pointers. So, this driver clears the AC64 bit of xhci->hcc_params
* to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in
* xhci_gen_setup().
+ *
+ * And, since the firmware/internal CPU control the USBSTS.STS_HALT
+ * and the process speed is down when the roothub port enters U3,
+ * long delay for the handshake of STS_HALT is neeed in xhci_suspend().
*/
if (xhci_rcar_is_gen2(hcd->self.controller) ||
- xhci_rcar_is_gen3(hcd->self.controller))
- xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
+ xhci_rcar_is_gen3(hcd->self.controller)) {
+ xhci->quirks |= XHCI_NO_64BIT_SUPPORT | XHCI_SLOW_SUSPEND;
+ }
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
return xhci_rcar_download_firmware(hcd);
[ Upstream commit 26c3f1542f5064310ad26794c09321780d00c57d ]
Currently, whilst in SNDRV_PCM_STATE_OPEN it is possible to call
snd_compr_stop, snd_compr_drain and snd_compr_partial_drain, which
allow a transition to SNDRV_PCM_STATE_SETUP. The stream should
only be able to move to the setup state once it has received a
SNDRV_COMPRESS_SET_PARAMS ioctl. Fix this issue by not allowing
those ioctls whilst in the open state.
Signed-off-by: Charles Keepax <[email protected]>
Acked-by: Vinod Koul <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/compress_offload.c | 30 ++++++++++++++++++++++++------
1 file changed, 24 insertions(+), 6 deletions(-)
diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c
index cf1317546b0ff..1538fbc7562b8 100644
--- a/sound/core/compress_offload.c
+++ b/sound/core/compress_offload.c
@@ -712,9 +712,15 @@ static int snd_compr_stop(struct snd_compr_stream *stream)
{
int retval;
- if (stream->runtime->state == SNDRV_PCM_STATE_PREPARED ||
- stream->runtime->state == SNDRV_PCM_STATE_SETUP)
+ switch (stream->runtime->state) {
+ case SNDRV_PCM_STATE_OPEN:
+ case SNDRV_PCM_STATE_SETUP:
+ case SNDRV_PCM_STATE_PREPARED:
return -EPERM;
+ default:
+ break;
+ }
+
retval = stream->ops->trigger(stream, SNDRV_PCM_TRIGGER_STOP);
if (!retval) {
snd_compr_drain_notify(stream);
@@ -802,9 +808,14 @@ static int snd_compr_drain(struct snd_compr_stream *stream)
{
int retval;
- if (stream->runtime->state == SNDRV_PCM_STATE_PREPARED ||
- stream->runtime->state == SNDRV_PCM_STATE_SETUP)
+ switch (stream->runtime->state) {
+ case SNDRV_PCM_STATE_OPEN:
+ case SNDRV_PCM_STATE_SETUP:
+ case SNDRV_PCM_STATE_PREPARED:
return -EPERM;
+ default:
+ break;
+ }
retval = stream->ops->trigger(stream, SND_COMPR_TRIGGER_DRAIN);
if (retval) {
@@ -841,9 +852,16 @@ static int snd_compr_next_track(struct snd_compr_stream *stream)
static int snd_compr_partial_drain(struct snd_compr_stream *stream)
{
int retval;
- if (stream->runtime->state == SNDRV_PCM_STATE_PREPARED ||
- stream->runtime->state == SNDRV_PCM_STATE_SETUP)
+
+ switch (stream->runtime->state) {
+ case SNDRV_PCM_STATE_OPEN:
+ case SNDRV_PCM_STATE_SETUP:
+ case SNDRV_PCM_STATE_PREPARED:
return -EPERM;
+ default:
+ break;
+ }
+
/* stream can be drained only when next track has been signalled */
if (stream->next_track == false)
return -EPERM;
--
2.20.1
[ Upstream commit a70ab8a8645083f3700814e757f2940a88b7ef88 ]
Partial drain and next track are intended for gapless playback and
don't really have an obvious interpretation for a capture stream, so
makes sense to not allow those operations on capture streams.
Signed-off-by: Charles Keepax <[email protected]>
Acked-by: Vinod Koul <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/compress_offload.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c
index 1538fbc7562b8..b4f1536b17cb5 100644
--- a/sound/core/compress_offload.c
+++ b/sound/core/compress_offload.c
@@ -835,6 +835,10 @@ static int snd_compr_next_track(struct snd_compr_stream *stream)
if (stream->runtime->state != SNDRV_PCM_STATE_RUNNING)
return -EPERM;
+ /* next track doesn't have any meaning for capture streams */
+ if (stream->direction == SND_COMPRESS_CAPTURE)
+ return -EPERM;
+
/* you can signal next track if this is intended to be a gapless stream
* and current track metadata is set
*/
@@ -862,6 +866,10 @@ static int snd_compr_partial_drain(struct snd_compr_stream *stream)
break;
}
+ /* partial drain doesn't have any meaning for capture streams */
+ if (stream->direction == SND_COMPRESS_CAPTURE)
+ return -EPERM;
+
/* stream can be drained only when next track has been signalled */
if (stream->next_track == false)
return -EPERM;
--
2.20.1
[ Upstream commit 4475f8c4ab7b248991a60d9c02808dbb813d6be8 ]
A previous fix to the stop handling on compressed capture streams causes
some knock on issues. The previous fix updated snd_compr_drain_notify to
set the state back to PREPARED for capture streams. This causes some
issues however as the handling for snd_compr_poll differs between the
two states and some user-space applications were relying on the poll
failing after the stream had been stopped.
To correct this regression whilst still fixing the original problem the
patch was addressing, update the capture handling to skip the PREPARED
state rather than skipping the SETUP state as it has done until now.
Fixes: 4f2ab5e1d13d ("ALSA: compress: Fix stop handling on compressed capture streams")
Signed-off-by: Charles Keepax <[email protected]>
Acked-by: Vinod Koul <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/sound/compress_driver.h | 5 +----
sound/core/compress_offload.c | 16 +++++++++++-----
2 files changed, 12 insertions(+), 9 deletions(-)
diff --git a/include/sound/compress_driver.h b/include/sound/compress_driver.h
index 392bac18398ba..33a07c3badf01 100644
--- a/include/sound/compress_driver.h
+++ b/include/sound/compress_driver.h
@@ -186,10 +186,7 @@ static inline void snd_compr_drain_notify(struct snd_compr_stream *stream)
if (snd_BUG_ON(!stream))
return;
- if (stream->direction == SND_COMPRESS_PLAYBACK)
- stream->runtime->state = SNDRV_PCM_STATE_SETUP;
- else
- stream->runtime->state = SNDRV_PCM_STATE_PREPARED;
+ stream->runtime->state = SNDRV_PCM_STATE_SETUP;
wake_up(&stream->runtime->sleep);
}
diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c
index 555df64d46ffc..cf1317546b0ff 100644
--- a/sound/core/compress_offload.c
+++ b/sound/core/compress_offload.c
@@ -575,10 +575,7 @@ snd_compr_set_params(struct snd_compr_stream *stream, unsigned long arg)
stream->metadata_set = false;
stream->next_track = false;
- if (stream->direction == SND_COMPRESS_PLAYBACK)
- stream->runtime->state = SNDRV_PCM_STATE_SETUP;
- else
- stream->runtime->state = SNDRV_PCM_STATE_PREPARED;
+ stream->runtime->state = SNDRV_PCM_STATE_SETUP;
} else {
return -EPERM;
}
@@ -694,8 +691,17 @@ static int snd_compr_start(struct snd_compr_stream *stream)
{
int retval;
- if (stream->runtime->state != SNDRV_PCM_STATE_PREPARED)
+ switch (stream->runtime->state) {
+ case SNDRV_PCM_STATE_SETUP:
+ if (stream->direction != SND_COMPRESS_CAPTURE)
+ return -EPERM;
+ break;
+ case SNDRV_PCM_STATE_PREPARED:
+ break;
+ default:
return -EPERM;
+ }
+
retval = stream->ops->trigger(stream, SNDRV_PCM_TRIGGER_START);
if (!retval)
stream->runtime->state = SNDRV_PCM_STATE_RUNNING;
--
2.20.1
[ Upstream commit bbb6fc43f131f77fcb7ae8081f6d7c51396a2120 ]
The "struct drm_connector" iteration cursor from
"for_each_new_connector_in_state" is never used in atomic_remove_fb()
which generates a compilation warning,
drivers/gpu/drm/drm_framebuffer.c: In function 'atomic_remove_fb':
drivers/gpu/drm/drm_framebuffer.c:838:24: warning: variable 'conn' set
but not used [-Wunused-but-set-variable]
Silence it by marking "conn" __maybe_unused.
Signed-off-by: Qian Cai <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/drm_framebuffer.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_framebuffer.c b/drivers/gpu/drm/drm_framebuffer.c
index c21e10c780ac5..af40189cdb60c 100644
--- a/drivers/gpu/drm/drm_framebuffer.c
+++ b/drivers/gpu/drm/drm_framebuffer.c
@@ -773,7 +773,7 @@ static int atomic_remove_fb(struct drm_framebuffer *fb)
struct drm_device *dev = fb->dev;
struct drm_atomic_state *state;
struct drm_plane *plane;
- struct drm_connector *conn;
+ struct drm_connector *conn __maybe_unused;
struct drm_connector_state *conn_state;
int i, ret = 0;
unsigned plane_mask;
--
2.20.1
From: Ben Hutchings <[email protected]>
Denis Andzakovic discovered a potential use-after-free in older kernel
versions, using syzkaller. tcp_write_queue_purge() frees all skbs in
the TCP write queue and can leave sk->sk_send_head pointing to freed
memory. tcp_disconnect() clears that pointer after calling
tcp_write_queue_purge(), but tcp_connect() does not. It is
(surprisingly) possible to add to the write queue between
disconnection and reconnection, so this needs to be done in both
places.
This bug was introduced by backports of commit 7f582b248d0a ("tcp:
purge write queue in tcp_connect_init()") and does not exist upstream
because of earlier changes in commit 75c119afe14f ("tcp: implement
rb-tree based retransmit queue"). The latter is a major change that's
not suitable for stable.
Reported-by: Denis Andzakovic <[email protected]>
Bisected-by: Salvatore Bonaccorso <[email protected]>
Fixes: 7f582b248d0a ("tcp: purge write queue in tcp_connect_init()")
Cc: <[email protected]> # before 4.15
Cc: Eric Dumazet <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/tcp.h | 3 +++
1 file changed, 3 insertions(+)
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1613,6 +1613,8 @@ static inline void tcp_init_send_head(st
sk->sk_send_head = NULL;
}
+static inline void tcp_init_send_head(struct sock *sk);
+
/* write queue abstraction */
static inline void tcp_write_queue_purge(struct sock *sk)
{
@@ -1621,6 +1623,7 @@ static inline void tcp_write_queue_purge
tcp_chrono_stop(sk, TCP_CHRONO_BUSY);
while ((skb = __skb_dequeue(&sk->sk_write_queue)) != NULL)
sk_wmem_free_skb(sk, skb);
+ tcp_init_send_head(sk);
sk_mem_reclaim(sk);
tcp_clear_all_retrans_hints(tcp_sk(sk));
tcp_init_send_head(sk);
From: Trond Myklebust <[email protected]>
commit 09a54f0ebfe263bc27c90bbd80187b9a93283887 upstream.
If the user specifies an open mode of 3, then we don't have a NFSv4 state
attached to the context, and so we Oops when we try to dereference it.
Reported-by: Olga Kornievskaia <[email protected]>
Fixes: 29b59f9416937 ("NFSv4: change nfs4_do_setattr to take...")
Signed-off-by: Trond Myklebust <[email protected]>
Cc: [email protected] # v4.10: 991eedb1371dc: NFSv4: Only pass the...
Cc: [email protected] # v4.10+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/nfs4proc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -2966,7 +2966,7 @@ static int _nfs4_do_setattr(struct inode
if (nfs4_copy_delegation_stateid(inode, FMODE_WRITE, &arg->stateid, &delegation_cred)) {
/* Use that stateid */
- } else if (ctx != NULL) {
+ } else if (ctx != NULL && ctx->state) {
struct nfs_lock_context *l_ctx;
if (!nfs4_valid_open_stateid(ctx->state))
return -EBADF;
[ Upstream commit d2b3fe42bc629c2d4002f652b3abdfb2e72991c7 ]
ieee80211_set_wmm_default() normally sets up the initial CW min/max for
each queue, except that it skips doing this if the driver doesn't
support ->conf_tx. We still end up calling drv_conf_tx() in some cases
(e.g., ieee80211_reconfig()), which also still won't do anything
useful...except it complains here about the invalid CW parameters.
Let's just skip the WARN if we weren't going to do anything useful with
the parameters.
Signed-off-by: Brian Norris <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/driver-ops.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/net/mac80211/driver-ops.c b/net/mac80211/driver-ops.c
index bb886e7db47f1..f783d1377d9a8 100644
--- a/net/mac80211/driver-ops.c
+++ b/net/mac80211/driver-ops.c
@@ -169,11 +169,16 @@ int drv_conf_tx(struct ieee80211_local *local,
if (!check_sdata_in_driver(sdata))
return -EIO;
- if (WARN_ONCE(params->cw_min == 0 ||
- params->cw_min > params->cw_max,
- "%s: invalid CW_min/CW_max: %d/%d\n",
- sdata->name, params->cw_min, params->cw_max))
+ if (params->cw_min == 0 || params->cw_min > params->cw_max) {
+ /*
+ * If we can't configure hardware anyway, don't warn. We may
+ * never have initialized the CW parameters.
+ */
+ WARN_ONCE(local->ops->conf_tx,
+ "%s: invalid CW_min/CW_max: %d/%d\n",
+ sdata->name, params->cw_min, params->cw_max);
return -EINVAL;
+ }
trace_drv_conf_tx(local, sdata, ac, params);
if (local->ops->conf_tx)
--
2.20.1
[ Upstream commit 94bccc34071094c165c79b515d21b63c78f7e968 ]
iscsi_ibft can use ACPI to find the iBFT entry during bootup,
currently, ISCSI_IBFT depends on ISCSI_IBFT_FIND which is
a X86 legacy way to find the iBFT by searching through the
low memory. This patch changes the dependency so that other
arch like ARM64 can use ISCSI_IBFT as long as the arch supports
ACPI.
ibft_init() needs to use the global variable ibft_addr declared
in iscsi_ibft_find.c. A #ifndef CONFIG_ISCSI_IBFT_FIND is needed
to declare the variable if CONFIG_ISCSI_IBFT_FIND is not selected.
Moving ibft_addr into the iscsi_ibft.c does not work because if
ISCSI_IBFT is selected as a module, the arch/x86/kernel/setup.c won't
be able to find the variable at compile time.
Signed-off-by: Thomas Tai <[email protected]>
Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/firmware/Kconfig | 5 +++--
drivers/firmware/iscsi_ibft.c | 4 ++++
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 6e4ed5a9c6fdc..42c4ff75281be 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -156,7 +156,7 @@ config DMI_SCAN_MACHINE_NON_EFI_FALLBACK
config ISCSI_IBFT_FIND
bool "iSCSI Boot Firmware Table Attributes"
- depends on X86 && ACPI
+ depends on X86 && ISCSI_IBFT
default n
help
This option enables the kernel to find the region of memory
@@ -167,7 +167,8 @@ config ISCSI_IBFT_FIND
config ISCSI_IBFT
tristate "iSCSI Boot Firmware Table Attributes module"
select ISCSI_BOOT_SYSFS
- depends on ISCSI_IBFT_FIND && SCSI && SCSI_LOWLEVEL
+ select ISCSI_IBFT_FIND if X86
+ depends on ACPI && SCSI && SCSI_LOWLEVEL
default n
help
This option enables support for detection and exposing of iSCSI
diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
index 132b9bae4b6aa..220bbc91cebdb 100644
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -93,6 +93,10 @@ MODULE_DESCRIPTION("sysfs interface to BIOS iBFT information");
MODULE_LICENSE("GPL");
MODULE_VERSION(IBFT_ISCSI_VERSION);
+#ifndef CONFIG_ISCSI_IBFT_FIND
+struct acpi_table_ibft *ibft_addr;
+#endif
+
struct ibft_hdr {
u8 id;
u8 version;
--
2.20.1
[ Upstream commit b575b24b8eee37f10484e951b62ce2a31c579775 ]
When firewalld is enabled with ipv4/ipv6 rpfilter, vrf
ipv4/ipv6 packets will be dropped. Vrf device will pass
through netfilter hook twice. One with enslaved device
and another one with l3 master device. So in device may
dismatch witch out device because out device is always
enslaved device.So failed with the check of the rpfilter
and drop the packets by mistake.
Signed-off-by: Miaohe Lin <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/netfilter/ipt_rpfilter.c | 1 +
net/ipv6/netfilter/ip6t_rpfilter.c | 8 ++++++--
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/netfilter/ipt_rpfilter.c b/net/ipv4/netfilter/ipt_rpfilter.c
index 37fb9552e8589..341d1bd637af2 100644
--- a/net/ipv4/netfilter/ipt_rpfilter.c
+++ b/net/ipv4/netfilter/ipt_rpfilter.c
@@ -96,6 +96,7 @@ static bool rpfilter_mt(const struct sk_buff *skb, struct xt_action_param *par)
flow.flowi4_mark = info->flags & XT_RPFILTER_VALID_MARK ? skb->mark : 0;
flow.flowi4_tos = RT_TOS(iph->tos);
flow.flowi4_scope = RT_SCOPE_UNIVERSE;
+ flow.flowi4_oif = l3mdev_master_ifindex_rcu(xt_in(par));
return rpfilter_lookup_reverse(xt_net(par), &flow, xt_in(par), info->flags) ^ invert;
}
diff --git a/net/ipv6/netfilter/ip6t_rpfilter.c b/net/ipv6/netfilter/ip6t_rpfilter.c
index 40eb16bd97860..d535768bea0fd 100644
--- a/net/ipv6/netfilter/ip6t_rpfilter.c
+++ b/net/ipv6/netfilter/ip6t_rpfilter.c
@@ -58,7 +58,9 @@ static bool rpfilter_lookup_reverse6(struct net *net, const struct sk_buff *skb,
if (rpfilter_addr_linklocal(&iph->saddr)) {
lookup_flags |= RT6_LOOKUP_F_IFACE;
fl6.flowi6_oif = dev->ifindex;
- } else if ((flags & XT_RPFILTER_LOOSE) == 0)
+ /* Set flowi6_oif for vrf devices to lookup route in l3mdev domain. */
+ } else if (netif_is_l3_master(dev) || netif_is_l3_slave(dev) ||
+ (flags & XT_RPFILTER_LOOSE) == 0)
fl6.flowi6_oif = dev->ifindex;
rt = (void *) ip6_route_lookup(net, &fl6, lookup_flags);
@@ -73,7 +75,9 @@ static bool rpfilter_lookup_reverse6(struct net *net, const struct sk_buff *skb,
goto out;
}
- if (rt->rt6i_idev->dev == dev || (flags & XT_RPFILTER_LOOSE))
+ if (rt->rt6i_idev->dev == dev ||
+ l3mdev_master_ifindex_rcu(rt->rt6i_idev->dev) == dev->ifindex ||
+ (flags & XT_RPFILTER_LOOSE))
ret = true;
out:
ip6_rt_put(rt);
--
2.20.1
From: Tomas Bortoli <[email protected]>
commit 30a8beeb3042f49d0537b7050fd21b490166a3d9 upstream.
Uninitialized Kernel memory can leak to USB devices.
Fix by using kzalloc() instead of kmalloc() on the affected buffers.
Signed-off-by: Tomas Bortoli <[email protected]>
Reported-by: [email protected]
Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters")
Cc: linux-stable <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
@@ -852,7 +852,7 @@ static int pcan_usb_fd_init(struct peak_
goto err_out;
/* allocate command buffer once for all for the interface */
- pdev->cmd_buffer_addr = kmalloc(PCAN_UFD_CMD_BUFFER_SIZE,
+ pdev->cmd_buffer_addr = kzalloc(PCAN_UFD_CMD_BUFFER_SIZE,
GFP_KERNEL);
if (!pdev->cmd_buffer_addr)
goto err_out_1;
From: Gary R Hook <[email protected]>
commit 9f00baf74e4b6f79a3a3dfab44fb7bb2e797b551 upstream.
AES GCM encryption allows for authsize values of 4, 8, and 12-16 bytes.
Validate the requested authsize, and retain it to save in the request
context.
Fixes: 36cf515b9bbe2 ("crypto: ccp - Enable support for AES GCM on v5 CCPs")
Cc: <[email protected]>
Signed-off-by: Gary R Hook <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/ccp/ccp-crypto-aes-galois.c | 14 ++++++++++++++
drivers/crypto/ccp/ccp-ops.c | 26 +++++++++++++++++++++-----
include/linux/ccp.h | 2 ++
3 files changed, 37 insertions(+), 5 deletions(-)
--- a/drivers/crypto/ccp/ccp-crypto-aes-galois.c
+++ b/drivers/crypto/ccp/ccp-crypto-aes-galois.c
@@ -63,6 +63,19 @@ static int ccp_aes_gcm_setkey(struct cry
static int ccp_aes_gcm_setauthsize(struct crypto_aead *tfm,
unsigned int authsize)
{
+ switch (authsize) {
+ case 16:
+ case 15:
+ case 14:
+ case 13:
+ case 12:
+ case 8:
+ case 4:
+ break;
+ default:
+ return -EINVAL;
+ }
+
return 0;
}
@@ -109,6 +122,7 @@ static int ccp_aes_gcm_crypt(struct aead
memset(&rctx->cmd, 0, sizeof(rctx->cmd));
INIT_LIST_HEAD(&rctx->cmd.entry);
rctx->cmd.engine = CCP_ENGINE_AES;
+ rctx->cmd.u.aes.authsize = crypto_aead_authsize(tfm);
rctx->cmd.u.aes.type = ctx->u.aes.type;
rctx->cmd.u.aes.mode = ctx->u.aes.mode;
rctx->cmd.u.aes.action = encrypt;
--- a/drivers/crypto/ccp/ccp-ops.c
+++ b/drivers/crypto/ccp/ccp-ops.c
@@ -625,6 +625,7 @@ static int ccp_run_aes_gcm_cmd(struct cc
unsigned long long *final;
unsigned int dm_offset;
+ unsigned int authsize;
unsigned int jobid;
unsigned int ilen;
bool in_place = true; /* Default value */
@@ -646,6 +647,21 @@ static int ccp_run_aes_gcm_cmd(struct cc
if (!aes->key) /* Gotta have a key SGL */
return -EINVAL;
+ /* Zero defaults to 16 bytes, the maximum size */
+ authsize = aes->authsize ? aes->authsize : AES_BLOCK_SIZE;
+ switch (authsize) {
+ case 16:
+ case 15:
+ case 14:
+ case 13:
+ case 12:
+ case 8:
+ case 4:
+ break;
+ default:
+ return -EINVAL;
+ }
+
/* First, decompose the source buffer into AAD & PT,
* and the destination buffer into AAD, CT & tag, or
* the input into CT & tag.
@@ -660,7 +676,7 @@ static int ccp_run_aes_gcm_cmd(struct cc
p_tag = scatterwalk_ffwd(sg_tag, p_outp, ilen);
} else {
/* Input length for decryption includes tag */
- ilen = aes->src_len - AES_BLOCK_SIZE;
+ ilen = aes->src_len - authsize;
p_tag = scatterwalk_ffwd(sg_tag, p_inp, ilen);
}
@@ -841,19 +857,19 @@ static int ccp_run_aes_gcm_cmd(struct cc
if (aes->action == CCP_AES_ACTION_ENCRYPT) {
/* Put the ciphered tag after the ciphertext. */
- ccp_get_dm_area(&final_wa, 0, p_tag, 0, AES_BLOCK_SIZE);
+ ccp_get_dm_area(&final_wa, 0, p_tag, 0, authsize);
} else {
/* Does this ciphered tag match the input? */
- ret = ccp_init_dm_workarea(&tag, cmd_q, AES_BLOCK_SIZE,
+ ret = ccp_init_dm_workarea(&tag, cmd_q, authsize,
DMA_BIDIRECTIONAL);
if (ret)
goto e_tag;
- ret = ccp_set_dm_area(&tag, 0, p_tag, 0, AES_BLOCK_SIZE);
+ ret = ccp_set_dm_area(&tag, 0, p_tag, 0, authsize);
if (ret)
goto e_tag;
ret = crypto_memneq(tag.address, final_wa.address,
- AES_BLOCK_SIZE) ? -EBADMSG : 0;
+ authsize) ? -EBADMSG : 0;
ccp_dm_free(&tag);
}
--- a/include/linux/ccp.h
+++ b/include/linux/ccp.h
@@ -173,6 +173,8 @@ struct ccp_aes_engine {
enum ccp_aes_mode mode;
enum ccp_aes_action action;
+ u32 authsize;
+
struct scatterlist *key;
u32 key_len; /* In bytes */
From: Gary R Hook <[email protected]>
commit b698a9f4c5c52317db486b069190c7e3d2b97e7e upstream.
The CCP driver copies data between scatter/gather lists and DMA buffers.
The length of the requested copy operation must be checked against
the available destination buffer length.
Reported-by: Maciej S. Szmigiero <[email protected]>
Signed-off-by: Gary R Hook <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/ccp/ccp-ops.c | 108 +++++++++++++++++++++++++++++++------------
1 file changed, 78 insertions(+), 30 deletions(-)
--- a/drivers/crypto/ccp/ccp-ops.c
+++ b/drivers/crypto/ccp/ccp-ops.c
@@ -178,14 +178,18 @@ static int ccp_init_dm_workarea(struct c
return 0;
}
-static void ccp_set_dm_area(struct ccp_dm_workarea *wa, unsigned int wa_offset,
- struct scatterlist *sg, unsigned int sg_offset,
- unsigned int len)
+static int ccp_set_dm_area(struct ccp_dm_workarea *wa, unsigned int wa_offset,
+ struct scatterlist *sg, unsigned int sg_offset,
+ unsigned int len)
{
WARN_ON(!wa->address);
+ if (len > (wa->length - wa_offset))
+ return -EINVAL;
+
scatterwalk_map_and_copy(wa->address + wa_offset, sg, sg_offset, len,
0);
+ return 0;
}
static void ccp_get_dm_area(struct ccp_dm_workarea *wa, unsigned int wa_offset,
@@ -205,8 +209,11 @@ static int ccp_reverse_set_dm_area(struc
unsigned int len)
{
u8 *p, *q;
+ int rc;
- ccp_set_dm_area(wa, wa_offset, sg, sg_offset, len);
+ rc = ccp_set_dm_area(wa, wa_offset, sg, sg_offset, len);
+ if (rc)
+ return rc;
p = wa->address + wa_offset;
q = p + len - 1;
@@ -509,7 +516,9 @@ static int ccp_run_aes_cmac_cmd(struct c
return ret;
dm_offset = CCP_SB_BYTES - aes->key_len;
- ccp_set_dm_area(&key, dm_offset, aes->key, 0, aes->key_len);
+ ret = ccp_set_dm_area(&key, dm_offset, aes->key, 0, aes->key_len);
+ if (ret)
+ goto e_key;
ret = ccp_copy_to_sb(cmd_q, &key, op.jobid, op.sb_key,
CCP_PASSTHRU_BYTESWAP_256BIT);
if (ret) {
@@ -528,7 +537,9 @@ static int ccp_run_aes_cmac_cmd(struct c
goto e_key;
dm_offset = CCP_SB_BYTES - AES_BLOCK_SIZE;
- ccp_set_dm_area(&ctx, dm_offset, aes->iv, 0, aes->iv_len);
+ ret = ccp_set_dm_area(&ctx, dm_offset, aes->iv, 0, aes->iv_len);
+ if (ret)
+ goto e_ctx;
ret = ccp_copy_to_sb(cmd_q, &ctx, op.jobid, op.sb_ctx,
CCP_PASSTHRU_BYTESWAP_256BIT);
if (ret) {
@@ -556,8 +567,10 @@ static int ccp_run_aes_cmac_cmd(struct c
goto e_src;
}
- ccp_set_dm_area(&ctx, 0, aes->cmac_key, 0,
- aes->cmac_key_len);
+ ret = ccp_set_dm_area(&ctx, 0, aes->cmac_key, 0,
+ aes->cmac_key_len);
+ if (ret)
+ goto e_src;
ret = ccp_copy_to_sb(cmd_q, &ctx, op.jobid, op.sb_ctx,
CCP_PASSTHRU_BYTESWAP_256BIT);
if (ret) {
@@ -669,7 +682,9 @@ static int ccp_run_aes_gcm_cmd(struct cc
return ret;
dm_offset = CCP_SB_BYTES - aes->key_len;
- ccp_set_dm_area(&key, dm_offset, aes->key, 0, aes->key_len);
+ ret = ccp_set_dm_area(&key, dm_offset, aes->key, 0, aes->key_len);
+ if (ret)
+ goto e_key;
ret = ccp_copy_to_sb(cmd_q, &key, op.jobid, op.sb_key,
CCP_PASSTHRU_BYTESWAP_256BIT);
if (ret) {
@@ -688,7 +703,9 @@ static int ccp_run_aes_gcm_cmd(struct cc
goto e_key;
dm_offset = CCP_AES_CTX_SB_COUNT * CCP_SB_BYTES - aes->iv_len;
- ccp_set_dm_area(&ctx, dm_offset, aes->iv, 0, aes->iv_len);
+ ret = ccp_set_dm_area(&ctx, dm_offset, aes->iv, 0, aes->iv_len);
+ if (ret)
+ goto e_ctx;
ret = ccp_copy_to_sb(cmd_q, &ctx, op.jobid, op.sb_ctx,
CCP_PASSTHRU_BYTESWAP_256BIT);
@@ -779,7 +796,9 @@ static int ccp_run_aes_gcm_cmd(struct cc
goto e_dst;
}
- ccp_set_dm_area(&ctx, dm_offset, aes->iv, 0, aes->iv_len);
+ ret = ccp_set_dm_area(&ctx, dm_offset, aes->iv, 0, aes->iv_len);
+ if (ret)
+ goto e_dst;
ret = ccp_copy_to_sb(cmd_q, &ctx, op.jobid, op.sb_ctx,
CCP_PASSTHRU_BYTESWAP_256BIT);
@@ -829,7 +848,9 @@ static int ccp_run_aes_gcm_cmd(struct cc
DMA_BIDIRECTIONAL);
if (ret)
goto e_tag;
- ccp_set_dm_area(&tag, 0, p_tag, 0, AES_BLOCK_SIZE);
+ ret = ccp_set_dm_area(&tag, 0, p_tag, 0, AES_BLOCK_SIZE);
+ if (ret)
+ goto e_tag;
ret = crypto_memneq(tag.address, final_wa.address,
AES_BLOCK_SIZE) ? -EBADMSG : 0;
@@ -924,7 +945,9 @@ static int ccp_run_aes_cmd(struct ccp_cm
return ret;
dm_offset = CCP_SB_BYTES - aes->key_len;
- ccp_set_dm_area(&key, dm_offset, aes->key, 0, aes->key_len);
+ ret = ccp_set_dm_area(&key, dm_offset, aes->key, 0, aes->key_len);
+ if (ret)
+ goto e_key;
ret = ccp_copy_to_sb(cmd_q, &key, op.jobid, op.sb_key,
CCP_PASSTHRU_BYTESWAP_256BIT);
if (ret) {
@@ -945,7 +968,9 @@ static int ccp_run_aes_cmd(struct ccp_cm
if (aes->mode != CCP_AES_MODE_ECB) {
/* Load the AES context - convert to LE */
dm_offset = CCP_SB_BYTES - AES_BLOCK_SIZE;
- ccp_set_dm_area(&ctx, dm_offset, aes->iv, 0, aes->iv_len);
+ ret = ccp_set_dm_area(&ctx, dm_offset, aes->iv, 0, aes->iv_len);
+ if (ret)
+ goto e_ctx;
ret = ccp_copy_to_sb(cmd_q, &ctx, op.jobid, op.sb_ctx,
CCP_PASSTHRU_BYTESWAP_256BIT);
if (ret) {
@@ -1123,8 +1148,12 @@ static int ccp_run_xts_aes_cmd(struct cc
* big endian to little endian.
*/
dm_offset = CCP_SB_BYTES - AES_KEYSIZE_128;
- ccp_set_dm_area(&key, dm_offset, xts->key, 0, xts->key_len);
- ccp_set_dm_area(&key, 0, xts->key, xts->key_len, xts->key_len);
+ ret = ccp_set_dm_area(&key, dm_offset, xts->key, 0, xts->key_len);
+ if (ret)
+ goto e_key;
+ ret = ccp_set_dm_area(&key, 0, xts->key, xts->key_len, xts->key_len);
+ if (ret)
+ goto e_key;
} else {
/* Version 5 CCPs use a 512-bit space for the key: each portion
* occupies 256 bits, or one entire slot, and is zero-padded.
@@ -1133,9 +1162,13 @@ static int ccp_run_xts_aes_cmd(struct cc
dm_offset = CCP_SB_BYTES;
pad = dm_offset - xts->key_len;
- ccp_set_dm_area(&key, pad, xts->key, 0, xts->key_len);
- ccp_set_dm_area(&key, dm_offset + pad, xts->key, xts->key_len,
- xts->key_len);
+ ret = ccp_set_dm_area(&key, pad, xts->key, 0, xts->key_len);
+ if (ret)
+ goto e_key;
+ ret = ccp_set_dm_area(&key, dm_offset + pad, xts->key,
+ xts->key_len, xts->key_len);
+ if (ret)
+ goto e_key;
}
ret = ccp_copy_to_sb(cmd_q, &key, op.jobid, op.sb_key,
CCP_PASSTHRU_BYTESWAP_256BIT);
@@ -1154,7 +1187,9 @@ static int ccp_run_xts_aes_cmd(struct cc
if (ret)
goto e_key;
- ccp_set_dm_area(&ctx, 0, xts->iv, 0, xts->iv_len);
+ ret = ccp_set_dm_area(&ctx, 0, xts->iv, 0, xts->iv_len);
+ if (ret)
+ goto e_ctx;
ret = ccp_copy_to_sb(cmd_q, &ctx, op.jobid, op.sb_ctx,
CCP_PASSTHRU_BYTESWAP_NOOP);
if (ret) {
@@ -1297,12 +1332,18 @@ static int ccp_run_des3_cmd(struct ccp_c
dm_offset = CCP_SB_BYTES - des3->key_len; /* Basic offset */
len_singlekey = des3->key_len / 3;
- ccp_set_dm_area(&key, dm_offset + 2 * len_singlekey,
- des3->key, 0, len_singlekey);
- ccp_set_dm_area(&key, dm_offset + len_singlekey,
- des3->key, len_singlekey, len_singlekey);
- ccp_set_dm_area(&key, dm_offset,
- des3->key, 2 * len_singlekey, len_singlekey);
+ ret = ccp_set_dm_area(&key, dm_offset + 2 * len_singlekey,
+ des3->key, 0, len_singlekey);
+ if (ret)
+ goto e_key;
+ ret = ccp_set_dm_area(&key, dm_offset + len_singlekey,
+ des3->key, len_singlekey, len_singlekey);
+ if (ret)
+ goto e_key;
+ ret = ccp_set_dm_area(&key, dm_offset,
+ des3->key, 2 * len_singlekey, len_singlekey);
+ if (ret)
+ goto e_key;
/* Copy the key to the SB */
ret = ccp_copy_to_sb(cmd_q, &key, op.jobid, op.sb_key,
@@ -1330,7 +1371,10 @@ static int ccp_run_des3_cmd(struct ccp_c
/* Load the context into the LSB */
dm_offset = CCP_SB_BYTES - des3->iv_len;
- ccp_set_dm_area(&ctx, dm_offset, des3->iv, 0, des3->iv_len);
+ ret = ccp_set_dm_area(&ctx, dm_offset, des3->iv, 0,
+ des3->iv_len);
+ if (ret)
+ goto e_ctx;
if (cmd_q->ccp->vdata->version == CCP_VERSION(3, 0))
load_mode = CCP_PASSTHRU_BYTESWAP_NOOP;
@@ -1614,8 +1658,10 @@ static int ccp_run_sha_cmd(struct ccp_cm
}
} else {
/* Restore the context */
- ccp_set_dm_area(&ctx, 0, sha->ctx, 0,
- sb_count * CCP_SB_BYTES);
+ ret = ccp_set_dm_area(&ctx, 0, sha->ctx, 0,
+ sb_count * CCP_SB_BYTES);
+ if (ret)
+ goto e_ctx;
}
ret = ccp_copy_to_sb(cmd_q, &ctx, op.jobid, op.sb_ctx,
@@ -1937,7 +1983,9 @@ static int ccp_run_passthru_cmd(struct c
if (ret)
return ret;
- ccp_set_dm_area(&mask, 0, pt->mask, 0, pt->mask_len);
+ ret = ccp_set_dm_area(&mask, 0, pt->mask, 0, pt->mask_len);
+ if (ret)
+ goto e_mask;
ret = ccp_copy_to_sb(cmd_q, &mask, op.jobid, op.sb_key,
CCP_PASSTHRU_BYTESWAP_NOOP);
if (ret) {
From: Wenwen Wang <[email protected]>
commit c7cd7c748a3250ca33509f9235efab9c803aca09 upstream.
In sound_insert_unit(), the controlling structure 's' is allocated through
kmalloc(). Then it is added to the sound driver list by invoking
__sound_insert_unit(). Later on, if __register_chrdev() fails, 's' is
removed from the list through __sound_remove_unit(). If 'index' is not less
than 0, -EBUSY is returned to indicate the error. However, 's' is not
deallocated on this execution path, leading to a memory leak bug.
To fix the above issue, free 's' before -EBUSY is returned.
Signed-off-by: Wenwen Wang <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/sound_core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/sound/sound_core.c
+++ b/sound/sound_core.c
@@ -287,7 +287,8 @@ retry:
goto retry;
}
spin_unlock(&sound_loader_lock);
- return -EBUSY;
+ r = -EBUSY;
+ goto fail;
}
}
From: Joerg Roedel <[email protected]>
commit 51b75b5b563a2637f9d8dc5bd02a31b2ff9e5ea0 upstream.
Do not require a struct page for the mapped memory location because it
might not exist. This can happen when an ioremapped region is mapped with
2MB pages.
Fixes: 5d72b4fba40ef ('x86, mm: support huge I/O mapping capability I/F')
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Dave Hansen <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/mm/fault.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -266,7 +266,7 @@ static inline pmd_t *vmalloc_sync_one(pg
if (!pmd_present(*pmd))
set_pmd(pmd, *pmd_k);
else
- BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k));
+ BUG_ON(pmd_pfn(*pmd) != pmd_pfn(*pmd_k));
return pmd_k;
}
[ Upstream commit b308467c916aa7acc5069802ab76a9f657434701 ]
There's a missing parenthesis at the script, with causes it to
fail to detect non-Fedora releases (e. g. RHEL/CentOS).
Tested with Centos 7.6.1810.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/sphinx-pre-install | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/sphinx-pre-install b/scripts/sphinx-pre-install
index 067459760a7b0..3524dbc313163 100755
--- a/scripts/sphinx-pre-install
+++ b/scripts/sphinx-pre-install
@@ -301,7 +301,7 @@ sub give_redhat_hints()
#
# Checks valid for RHEL/CentOS version 7.x.
#
- if (! $system_release =~ /Fedora/) {
+ if (!($system_release =~ /Fedora/)) {
$map{"virtualenv"} = "python-virtualenv";
}
--
2.20.1
From: Stephane Grosjean <[email protected]>
commit fee6a8923ae0d318a7f7950c6c6c28a96cea099b upstream.
When closing the CAN device while tx skbs are inflight, echo skb could
be released twice. By calling close_candev() before unlinking all
pending tx urbs, then the internal echo_skb[] array is fully and
correctly cleared before the USB write callback and, therefore,
can_get_echo_skb() are called, for each aborted URB.
Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core")
Signed-off-by: Stephane Grosjean <[email protected]>
Cc: linux-stable <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/peak_usb/pcan_usb_core.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
@@ -594,16 +594,16 @@ static int peak_usb_ndo_stop(struct net_
dev->state &= ~PCAN_USB_STATE_STARTED;
netif_stop_queue(netdev);
+ close_candev(netdev);
+
+ dev->can.state = CAN_STATE_STOPPED;
+
/* unlink all pending urbs and free used memory */
peak_usb_unlink_all_urbs(dev);
if (dev->adapter->dev_stop)
dev->adapter->dev_stop(dev);
- close_candev(netdev);
-
- dev->can.state = CAN_STATE_STOPPED;
-
/* can set bus off now */
if (dev->adapter->dev_set_bus) {
int err = dev->adapter->dev_set_bus(dev, 0);
From: Gary R Hook <[email protected]>
commit e2664ecbb2f26225ac6646876f2899558ffb2604 upstream.
AES GCM input buffers for decryption contain AAD+CTEXT+TAG. Only
decrypt the ciphertext, and use the tag for comparison.
Fixes: 36cf515b9bbe2 ("crypto: ccp - Enable support for AES GCM on v5 CCPs")
Cc: <[email protected]>
Signed-off-by: Gary R Hook <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/ccp/ccp-ops.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/crypto/ccp/ccp-ops.c
+++ b/drivers/crypto/ccp/ccp-ops.c
@@ -752,8 +752,7 @@ static int ccp_run_aes_gcm_cmd(struct cc
while (src.sg_wa.bytes_left) {
ccp_prepare_data(&src, &dst, &op, AES_BLOCK_SIZE, true);
if (!src.sg_wa.bytes_left) {
- unsigned int nbytes = aes->src_len
- % AES_BLOCK_SIZE;
+ unsigned int nbytes = ilen % AES_BLOCK_SIZE;
if (nbytes) {
op.eom = 1;
From: Nick Desaulniers <[email protected]>
commit e9e08a07385e08f1a7f85c5d1e345c21c9564963 upstream.
With CONFIG_LKDTM=y and make OBJCOPY=llvm-objcopy, llvm-objcopy errors:
llvm-objcopy: error: --set-section-flags=.text conflicts with
--rename-section=.text=.rodata
Rather than support setting flags then renaming sections vs renaming
then setting flags, it's simpler to just change both at the same time
via --rename-section. Adding the load flag is required for GNU objcopy
to mark .rodata Type as PROGBITS after the rename.
This can be verified with:
$ readelf -S drivers/misc/lkdtm/rodata_objcopy.o
...
Section Headers:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
...
[ 1] .rodata PROGBITS 0000000000000000 00000040
0000000000000004 0000000000000000 A 0 0 4
...
Which shows that .text is now renamed .rodata, the alloc flag A is set,
the type is PROGBITS, and the section is not flagged as writeable W.
Cc: [email protected]
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=24554
Link: https://github.com/ClangBuiltLinux/linux/issues/448
Reported-by: Nathan Chancellor <[email protected]>
Suggested-by: Alan Modra <[email protected]>
Suggested-by: Jordan Rupprect <[email protected]>
Suggested-by: Kees Cook <[email protected]>
Acked-by: Kees Cook <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Signed-off-by: Nick Desaulniers <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit e9e08a07385e08f1a7f85c5d1e345c21c9564963 upstream.
With CONFIG_LKDTM=y and make OBJCOPY=llvm-objcopy, llvm-objcopy errors:
llvm-objcopy: error: --set-section-flags=.text conflicts with
--rename-section=.text=.rodata
Rather than support setting flags then renaming sections vs renaming
then setting flags, it's simpler to just change both at the same time
via --rename-section. Adding the load flag is required for GNU objcopy
to mark .rodata Type as PROGBITS after the rename.
This can be verified with:
$ readelf -S drivers/misc/lkdtm/rodata_objcopy.o
...
Section Headers:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
...
[ 1] .rodata PROGBITS 0000000000000000 00000040
0000000000000004 0000000000000000 A 0 0 4
...
Which shows that .text is now renamed .rodata, the alloc flag A is set,
the type is PROGBITS, and the section is not flagged as writeable W.
Cc: [email protected]
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=24554
Link: https://github.com/ClangBuiltLinux/linux/issues/448
Reported-by: Nathan Chancellor <[email protected]>
Suggested-by: Alan Modra <[email protected]>
Suggested-by: Jordan Rupprect <[email protected]>
Suggested-by: Kees Cook <[email protected]>
Acked-by: Kees Cook <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Signed-off-by: Nick Desaulniers <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/Makefile | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -69,8 +69,7 @@ KCOV_INSTRUMENT_lkdtm_rodata.o := n
OBJCOPYFLAGS :=
OBJCOPYFLAGS_lkdtm_rodata_objcopy.o := \
- --set-section-flags .text=alloc,readonly \
- --rename-section .text=.rodata
+ --rename-section .text=.rodata,alloc,readonly,load
targets += lkdtm_rodata.o lkdtm_rodata_objcopy.o
$(obj)/lkdtm_rodata_objcopy.o: $(obj)/lkdtm_rodata.o FORCE
$(call if_changed,objcopy)
From: Suzuki K Poulose <[email protected]>
commit fc05481b2fcabaaeccf63e32ac1baab54e5b6963 upstream.
syzbot reported the following crash [0]:
BUG: KASAN: use-after-free in usb_free_coherent+0x79/0x80
drivers/usb/core/usb.c:928
Read of size 8 at addr ffff8881b18599c8 by task syz-executor.4/16007
CPU: 0 PID: 16007 Comm: syz-executor.4 Not tainted 5.3.0-rc2+ #23
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xca/0x13e lib/dump_stack.c:113
print_address_description+0x6a/0x32c mm/kasan/report.c:351
__kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482
kasan_report+0xe/0x12 mm/kasan/common.c:612
usb_free_coherent+0x79/0x80 drivers/usb/core/usb.c:928
yurex_delete+0x138/0x330 drivers/usb/misc/yurex.c:100
kref_put include/linux/kref.h:65 [inline]
yurex_release+0x66/0x90 drivers/usb/misc/yurex.c:392
__fput+0x2d7/0x840 fs/file_table.c:280
task_work_run+0x13f/0x1c0 kernel/task_work.c:113
tracehook_notify_resume include/linux/tracehook.h:188 [inline]
exit_to_usermode_loop+0x1d2/0x200 arch/x86/entry/common.c:163
prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline]
syscall_return_slowpath arch/x86/entry/common.c:274 [inline]
do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x413511
Code: 75 14 b8 03 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 04 1b 00 00 c3 48
83 ec 08 e8 0a fc ff ff 48 89 04 24 b8 03 00 00 00 0f 05 <48> 8b 3c 24 48
89 c2 e8 53 fc ff ff 48 89 d0 48 83 c4 08 48 3d 01
RSP: 002b:00007ffc424ea2e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000007 RCX: 0000000000413511
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000006
RBP: 0000000000000001 R08: 0000000029a2fc22 R09: 0000000029a2fc26
R10: 00007ffc424ea3c0 R11: 0000000000000293 R12: 000000000075c9a0
R13: 000000000075c9a0 R14: 0000000000761938 R15: ffffffffffffffff
Allocated by task 2776:
save_stack+0x1b/0x80 mm/kasan/common.c:69
set_track mm/kasan/common.c:77 [inline]
__kasan_kmalloc mm/kasan/common.c:487 [inline]
__kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:460
kmalloc include/linux/slab.h:552 [inline]
kzalloc include/linux/slab.h:748 [inline]
usb_alloc_dev+0x51/0xf95 drivers/usb/core/usb.c:583
hub_port_connect drivers/usb/core/hub.c:5004 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5213 [inline]
port_event drivers/usb/core/hub.c:5359 [inline]
hub_event+0x15c0/0x3640 drivers/usb/core/hub.c:5441
process_one_work+0x92b/0x1530 kernel/workqueue.c:2269
worker_thread+0x96/0xe20 kernel/workqueue.c:2415
kthread+0x318/0x420 kernel/kthread.c:255
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352
Freed by task 16007:
save_stack+0x1b/0x80 mm/kasan/common.c:69
set_track mm/kasan/common.c:77 [inline]
__kasan_slab_free+0x130/0x180 mm/kasan/common.c:449
slab_free_hook mm/slub.c:1423 [inline]
slab_free_freelist_hook mm/slub.c:1470 [inline]
slab_free mm/slub.c:3012 [inline]
kfree+0xe4/0x2f0 mm/slub.c:3953
device_release+0x71/0x200 drivers/base/core.c:1064
kobject_cleanup lib/kobject.c:693 [inline]
kobject_release lib/kobject.c:722 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x171/0x280 lib/kobject.c:739
put_device+0x1b/0x30 drivers/base/core.c:2213
usb_put_dev+0x1f/0x30 drivers/usb/core/usb.c:725
yurex_delete+0x40/0x330 drivers/usb/misc/yurex.c:95
kref_put include/linux/kref.h:65 [inline]
yurex_release+0x66/0x90 drivers/usb/misc/yurex.c:392
__fput+0x2d7/0x840 fs/file_table.c:280
task_work_run+0x13f/0x1c0 kernel/task_work.c:113
tracehook_notify_resume include/linux/tracehook.h:188 [inline]
exit_to_usermode_loop+0x1d2/0x200 arch/x86/entry/common.c:163
prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline]
syscall_return_slowpath arch/x86/entry/common.c:274 [inline]
do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff8881b1859980
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 72 bytes inside of
2048-byte region [ffff8881b1859980, ffff8881b185a180)
The buggy address belongs to the page:
page:ffffea0006c61600 refcount:1 mapcount:0 mapping:ffff8881da00c000
index:0x0 compound_mapcount: 0
flags: 0x200000000010200(slab|head)
raw: 0200000000010200 0000000000000000 0000000100000001 ffff8881da00c000
raw: 0000000000000000 00000000000f000f 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881b1859880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8881b1859900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
> ffff8881b1859980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881b1859a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881b1859a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
A quick look at the yurex_delete() shows that we drop the reference
to the usb_device before releasing any buffers associated with the
device. Delay the reference drop until we have finished the cleanup.
[0] https://lore.kernel.org/lkml/[email protected]/
Fixes: 6bc235a2e24a5e ("USB: add driver for Meywa-Denki & Kayac YUREX")
Cc: Jiri Kosina <[email protected]>
Cc: Tomoki Sekiyama <[email protected]>
Cc: Oliver Neukum <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Alan Stern <[email protected]>
Cc: [email protected]
Cc: [email protected]
Reported-by: [email protected]
Signed-off-by: Suzuki K Poulose <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/misc/yurex.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -96,7 +96,6 @@ static void yurex_delete(struct kref *kr
dev_dbg(&dev->interface->dev, "%s\n", __func__);
- usb_put_dev(dev->udev);
if (dev->cntl_urb) {
usb_kill_urb(dev->cntl_urb);
kfree(dev->cntl_req);
@@ -112,6 +111,7 @@ static void yurex_delete(struct kref *kr
dev->int_buffer, dev->urb->transfer_dma);
usb_free_urb(dev->urb);
}
+ usb_put_dev(dev->udev);
kfree(dev);
}
From: Mikulas Patocka <[email protected]>
commit d0a255e795ab976481565f6ac178314b34fbf891 upstream.
A deadlock with this stacktrace was observed.
The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio
shrinker and the shrinker depends on I/O completion in the dm-bufio
subsystem.
In order to fix the deadlock (and other similar ones), we set the flag
PF_MEMALLOC_NOIO at loop thread entry.
PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0"
#0 [ffff8813dedfb938] __schedule at ffffffff8173f405
#1 [ffff8813dedfb990] schedule at ffffffff8173fa27
#2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec
#3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186
#4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f
#5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8
#6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81
#7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio]
#8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio]
#9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio]
#10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce
#11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778
#12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f
#13 [ffff8813dedfbec0] kthread at ffffffff810a8428
#14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242
PID: 14127 TASK: ffff881455749c00 CPU: 11 COMMAND: "loop1"
#0 [ffff88272f5af228] __schedule at ffffffff8173f405
#1 [ffff88272f5af280] schedule at ffffffff8173fa27
#2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e
#3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5
#4 [ffff88272f5af330] mutex_lock at ffffffff81742133
#5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio]
#6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd
#7 [ffff88272f5af470] shrink_zone at ffffffff811ad778
#8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34
#9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8
#10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3
#11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71
#12 [ffff88272f5af760] new_slab at ffffffff811f4523
#13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5
#14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b
#15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3
#16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3
#17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs]
#18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994
#19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs]
#20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop]
#21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop]
#22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c
#23 [ffff88272f5afec0] kthread at ffffffff810a8428
#24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242
Signed-off-by: Mikulas Patocka <[email protected]>
Cc: [email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/loop.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -857,7 +857,7 @@ static void loop_unprepare_queue(struct
static int loop_kthread_worker_fn(void *worker_ptr)
{
- current->flags |= PF_LESS_THROTTLE;
+ current->flags |= PF_LESS_THROTTLE | PF_MEMALLOC_NOIO;
return kthread_worker_fn(worker_ptr);
}
stable-rc/linux-4.14.y boot: 132 boots: 2 failed, 117 passed with 12 offline, 1 untried/unknown (v4.14.138-70-g736c2f07319a)
Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.14.y/kernel/v4.14.138-70-g736c2f07319a/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.14.y/kernel/v4.14.138-70-g736c2f07319a/
Tree: stable-rc
Branch: linux-4.14.y
Git Describe: v4.14.138-70-g736c2f07319a
Git Commit: 736c2f07319a323c55007bcf8fca70481e9c7175
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 69 unique boards, 25 SoC families, 16 builds out of 201
Boot Regressions Detected:
arm:
qcom_defconfig:
gcc-8:
qcom-apq8064-cm-qs600:
lab-baylibre-seattle: new failure (last pass: v4.14.138)
qcom-apq8064-ifc6410:
lab-baylibre-seattle: new failure (last pass: v4.14.138)
Boot Failures Detected:
arc:
hsdk_defconfig:
gcc-8:
hsdk: 1 failed lab
arm64:
defconfig:
gcc-8:
rk3399-firefly: 1 failed lab
Offline Platforms:
arm64:
defconfig:
gcc-8
apq8016-sbc: 1 offline lab
meson-gxbb-odroidc2: 1 offline lab
arm:
multi_v7_defconfig:
gcc-8
imx6dl-wandboard_solo: 1 offline lab
imx6q-wandboard: 1 offline lab
qcom-apq8064-cm-qs600: 1 offline lab
qcom-apq8064-ifc6410: 1 offline lab
sun5i-r8-chip: 1 offline lab
sunxi_defconfig:
gcc-8
sun5i-r8-chip: 1 offline lab
qcom_defconfig:
gcc-8
qcom-apq8064-cm-qs600: 1 offline lab
qcom-apq8064-ifc6410: 1 offline lab
imx_v6_v7_defconfig:
gcc-8
imx6dl-wandboard_solo: 1 offline lab
imx6q-wandboard: 1 offline lab
---
For more info write to <[email protected]>
On Wed, 14 Aug 2019 at 22:42, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.14.139 release.
> There are 69 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri 16 Aug 2019 04:55:34 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.139-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.14.139-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: 736c2f07319a323c55007bcf8fca70481e9c7175
git describe: v4.14.138-70-g736c2f07319a
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.138-70-g736c2f07319a
No regressions (compared to build v4.14.138)
No fixes (compared to build v4.14.138)
Ran 23727 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* ltp-fs-tests
* ltp-securebits-tests
* network-basic-tests
* ltp-open-posix-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
* ssuite
--
Linaro LKFT
https://lkft.linaro.org
On Wed, Aug 14, 2019 at 07:00:58PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.139 release.
> There are 69 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri 16 Aug 2019 04:55:34 PM UTC.
> Anything received after that time might be too late.
>
Build results:
total: 172 pass: 172 fail: 0
Qemu test results:
total: 372 pass: 372 fail:
Guenter
On 8/14/19 11:00 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.139 release.
> There are 69 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri 16 Aug 2019 04:55:34 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.139-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On Wed, Aug 14, 2019 at 07:00:58PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.139 release.
> There are 69 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri 16 Aug 2019 04:55:34 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.139-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Compiled and booted with no dmesg regressions on my system.
Cheers,
Kelsey
On Thu, Aug 15, 2019 at 08:37:33PM -0600, shuah wrote:
> On 8/14/19 11:00 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.14.139 release.
> > There are 69 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Fri 16 Aug 2019 04:55:34 PM UTC.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.139-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> >
>
> Compiled and booted on my test system. No dmesg regressions.
Thanks for testing all of these and letting me know.
greg k-h