As pointed out in https://kernelnewbies.org/KernelJanitors/Todo
this patch replaces the outdated macro of DPRINTK for pr_debug()
To: Dominik Brodowski <[email protected]>
To: Thomas Gleixner <[email protected]>
To: Greg Kroah-Hartman <[email protected]>
To: Adam Zerella <[email protected]>
To: [email protected]
Signed-off-by: Adam Zerella <[email protected]>
---
drivers/pcmcia/i82092.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c
index ec54a2aa5cb8..e1929520c20e 100644
--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -117,9 +117,9 @@ static int i82092aa_pci_probe(struct pci_dev *dev, const struct pci_device_id *i
if (card_present(i)) {
sockets[i].card_state = 3;
- dprintk(KERN_DEBUG "i82092aa: slot %i is occupied\n",i);
+ pr_debug("i82092aa: slot %i is occupied\n", i);
} else {
- dprintk(KERN_DEBUG "i82092aa: slot %i is vacant\n",i);
+ pr_debug("i82092aa: slot %i is vacant\n", i);
}
}
@@ -128,7 +128,7 @@ static int i82092aa_pci_probe(struct pci_dev *dev, const struct pci_device_id *i
pci_write_config_byte(dev, 0x50, configbyte); /* PCI Interrupt Routing Register */
/* Register the interrupt handler */
- dprintk(KERN_DEBUG "Requesting interrupt %i \n",dev->irq);
+ pr_debug("Requesting interrupt %i\n", dev->irq);
if ((ret = request_irq(dev->irq, i82092aa_interrupt, IRQF_SHARED, "i82092aa", i82092aa_interrupt))) {
printk(KERN_ERR "i82092aa: Failed to register IRQ %d, aborting\n", dev->irq);
goto err_out_free_res;
--
2.20.1
On Fri, Aug 23, 2019 at 04:29:49PM +1000, Adam Zerella wrote:
> As pointed out in https://kernelnewbies.org/KernelJanitors/Todo
> this patch replaces the outdated macro of DPRINTK for pr_debug()
>
> To: Dominik Brodowski <[email protected]>
> To: Thomas Gleixner <[email protected]>
> To: Greg Kroah-Hartman <[email protected]>
> To: Adam Zerella <[email protected]>
> To: [email protected]
> Signed-off-by: Adam Zerella <[email protected]>
> ---
> drivers/pcmcia/i82092.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c
> index ec54a2aa5cb8..e1929520c20e 100644
> --- a/drivers/pcmcia/i82092.c
> +++ b/drivers/pcmcia/i82092.c
> @@ -117,9 +117,9 @@ static int i82092aa_pci_probe(struct pci_dev *dev, const struct pci_device_id *i
>
> if (card_present(i)) {
> sockets[i].card_state = 3;
> - dprintk(KERN_DEBUG "i82092aa: slot %i is occupied\n",i);
> + pr_debug("i82092aa: slot %i is occupied\n", i);
> } else {
> - dprintk(KERN_DEBUG "i82092aa: slot %i is vacant\n",i);
> + pr_debug("i82092aa: slot %i is vacant\n", i);
These really should use dev_dbg() instead, as this is a driver and you
have access to a real device here.
> }
> }
>
> @@ -128,7 +128,7 @@ static int i82092aa_pci_probe(struct pci_dev *dev, const struct pci_device_id *i
> pci_write_config_byte(dev, 0x50, configbyte); /* PCI Interrupt Routing Register */
>
> /* Register the interrupt handler */
> - dprintk(KERN_DEBUG "Requesting interrupt %i \n",dev->irq);
> + pr_debug("Requesting interrupt %i\n", dev->irq);
Same here.
thanks,
greg k-h
As suggested in https://kernelnewbies.org/KernelJanitors/Todo
this patch replaces the outdated macro of DPRINTK for dev_dbg()
To: Dominik Brodowski <[email protected]>
To: Thomas Gleixner <[email protected]>
To: Greg Kroah-Hartman <[email protected]>
To: Adam Zerella <[email protected]>
To: [email protected]
Signed-off-by: Adam Zerella <[email protected]>
---
Changes in v2:
- Swap pr_debug() for dev_dbg()
- Clarify commit summary message
drivers/pcmcia/i82092.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c
index ec54a2aa5cb8..245d60189375 100644
--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -117,9 +117,9 @@ static int i82092aa_pci_probe(struct pci_dev *dev, const struct pci_device_id *i
if (card_present(i)) {
sockets[i].card_state = 3;
- dprintk(KERN_DEBUG "i82092aa: slot %i is occupied\n",i);
+ dev_dbg(&dev->dev, "i82092aa: slot %i is occupied\n", i);
} else {
- dprintk(KERN_DEBUG "i82092aa: slot %i is vacant\n",i);
+ dev_dbg(&dev->dev, "i82092aa: slot %i is vacant\n", i);
}
}
@@ -128,7 +128,7 @@ static int i82092aa_pci_probe(struct pci_dev *dev, const struct pci_device_id *i
pci_write_config_byte(dev, 0x50, configbyte); /* PCI Interrupt Routing Register */
/* Register the interrupt handler */
- dprintk(KERN_DEBUG "Requesting interrupt %i \n",dev->irq);
+ dev_dbg(&dev->dev, "Requesting interrupt %i\n", dev->irq);
if ((ret = request_irq(dev->irq, i82092aa_interrupt, IRQF_SHARED, "i82092aa", i82092aa_interrupt))) {
printk(KERN_ERR "i82092aa: Failed to register IRQ %d, aborting\n", dev->irq);
goto err_out_free_res;
--
2.20.1