Do tx ring cleaning and freeing of rx buffers, when chip is shutdown and
allocate buffers before bringing chip up.
Signed-off-by: Thomas Bogendoerfer <[email protected]>
---
drivers/net/ethernet/sgi/ioc3-eth.c | 28 +++++++++++++---------------
1 file changed, 13 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/sgi/ioc3-eth.c b/drivers/net/ethernet/sgi/ioc3-eth.c
index 191eafbeb455..e51922b5ca04 100644
--- a/drivers/net/ethernet/sgi/ioc3-eth.c
+++ b/drivers/net/ethernet/sgi/ioc3-eth.c
@@ -108,6 +108,9 @@ static inline unsigned int ioc3_hash(const unsigned char *addr);
static void ioc3_start(struct ioc3_private *ip);
static inline void ioc3_stop(struct ioc3_private *ip);
static void ioc3_init(struct net_device *dev);
+static void ioc3_alloc_rx_bufs(struct net_device *dev);
+static void ioc3_free_rx_bufs(struct ioc3_private *ip);
+static inline void ioc3_clean_tx_ring(struct ioc3_private *ip);
static const char ioc3_str[] = "IOC3 Ethernet";
static const struct ethtool_ops ioc3_ethtool_ops;
@@ -660,7 +663,11 @@ static void ioc3_error(struct net_device *dev, u32 eisr)
netdev_err(dev, "TX PCI error.\n");
ioc3_stop(ip);
+ ioc3_free_rx_bufs(ip);
+ ioc3_clean_tx_ring(ip);
+
ioc3_init(dev);
+ ioc3_alloc_rx_bufs(dev);
ioc3_start(ip);
ioc3_mii_init(ip);
@@ -828,16 +835,6 @@ static void ioc3_alloc_rx_bufs(struct net_device *dev)
ip->rx_pi = RX_BUFFS;
}
-static void ioc3_init_rings(struct net_device *dev)
-{
- struct ioc3_private *ip = netdev_priv(dev);
-
- ioc3_free_rx_bufs(ip);
- ioc3_alloc_rx_bufs(dev);
-
- ioc3_clean_tx_ring(ip);
-}
-
static inline void ioc3_ssram_disc(struct ioc3_private *ip)
{
struct ioc3_ethregs *regs = ip->regs;
@@ -890,8 +887,6 @@ static void ioc3_init(struct net_device *dev)
writel(ip->ehar_h, ®s->ehar_h);
writel(ip->ehar_l, ®s->ehar_l);
writel(42, ®s->ersr); /* XXX should be random */
-
- ioc3_init_rings(dev);
}
static void ioc3_start(struct ioc3_private *ip)
@@ -947,7 +942,9 @@ static int ioc3_open(struct net_device *dev)
ip->ehar_h = 0;
ip->ehar_l = 0;
+
ioc3_init(dev);
+ ioc3_alloc_rx_bufs(dev);
ioc3_start(ip);
ioc3_mii_start(ip);
@@ -1217,7 +1214,6 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
ioc3_init(dev);
- ioc3_start(ip);
ip->pdev = pdev;
@@ -1268,9 +1264,7 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
return 0;
out_stop:
- ioc3_stop(ip);
del_timer_sync(&ip->ioc3_timer);
- ioc3_free_rx_bufs(ip);
kfree(ip->rxr);
kfree(ip->txr);
out_res:
@@ -1437,7 +1431,11 @@ static void ioc3_timeout(struct net_device *dev)
spin_lock_irq(&ip->ioc3_lock);
ioc3_stop(ip);
+ ioc3_free_rx_bufs(ip);
+ ioc3_clean_tx_ring(ip);
+
ioc3_init(dev);
+ ioc3_alloc_rx_bufs(dev);
ioc3_start(ip);
ioc3_mii_init(ip);
ioc3_mii_start(ip);
--
2.13.7
On Wed, 28 Aug 2019 16:03:08 +0200, Thomas Bogendoerfer wrote:
> Do tx ring cleaning and freeing of rx buffers, when chip is shutdown and
> allocate buffers before bringing chip up.
>
> Signed-off-by: Thomas Bogendoerfer <[email protected]>
Ah, so you are moving the alloc/free to open/close, that's good.