On Thu, Sep 05, 2019 at 05:00:17PM +0300, Jonathan Chocron wrote:
> The Amazon Annapurna Labs PCIe Root Port exposes the VPD capability,
> but there is no actual support for it.
>
> Trying to access the VPD (for example, as part of lspci -vv or when
> reading the vpd sysfs file), results in the following warning print:
>
> pcieport 0001:00:00.0: VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update
>
> Signed-off-by: Jonathan Chocron <[email protected]>
> Reviewed-by: Gustavo Pimentel <[email protected]>
Reviewed-by: Andrew Murray <[email protected]>
> ---
> drivers/pci/vpd.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/pci/vpd.c b/drivers/pci/vpd.c
> index 4963c2e2bd4c..7915d10f9aa1 100644
> --- a/drivers/pci/vpd.c
> +++ b/drivers/pci/vpd.c
> @@ -571,6 +571,12 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005f, quirk_blacklist_vpd);
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, PCI_ANY_ID,
> quirk_blacklist_vpd);
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_QLOGIC, 0x2261, quirk_blacklist_vpd);
> +/*
> + * The Amazon Annapurna Labs 0x0031 device id is reused for other non Root Port
> + * device types, so the quirk is registered for the PCI_CLASS_BRIDGE_PCI class.
> + */
> +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031,
> + PCI_CLASS_BRIDGE_PCI, 8, quirk_blacklist_vpd);
>
> /*
> * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the
> --
> 2.17.1
>