2019-09-09 14:13:21

by Hui Song

Subject: [PATCH v3] gpio/mpc8xxx: change irq handler from chained to normal

From: Song Hui <[email protected]>

More than one gpio controllers can share one interrupt, change the
driver to request shared irq.

Signed-off-by: Laurentiu Tudor <[email protected]>
Signed-off-by: Alex Marginean <[email protected]>
Signed-off-by: Song Hui <[email protected]>
---
Changes in v3:
- update the patch description.
Changes in v2:
- delete the compatible of ls1088a.
drivers/gpio/gpio-mpc8xxx.c | 20 +++++++++++++-------
1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
index 16a47de..4006250 100644
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -22,6 +22,7 @@
#include <linux/irq.h>
#include <linux/gpio/driver.h>
#include <linux/bitops.h>
+#include <linux/interrupt.h>

#define MPC8XXX_GPIO_PINS 32

@@ -127,10 +128,9 @@ static int mpc8xxx_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
return -ENXIO;
}

-static void mpc8xxx_gpio_irq_cascade(struct irq_desc *desc)
+static irqreturn_t mpc8xxx_gpio_irq_cascade(int irq, void *data)
{
- struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_desc_get_handler_data(desc);
- struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc = (struct mpc8xxx_gpio_chip *)data;
struct gpio_chip *gc = &mpc8xxx_gc->gc;
unsigned int mask;

@@ -139,8 +139,8 @@ static void mpc8xxx_gpio_irq_cascade(struct irq_desc *desc)
if (mask)
generic_handle_irq(irq_linear_revmap(mpc8xxx_gc->irq,
32 - ffs(mask)));
- if (chip->irq_eoi)
- chip->irq_eoi(&desc->irq_data);
+
+ return IRQ_HANDLED;
}

static void mpc8xxx_irq_unmask(struct irq_data *d)
@@ -409,8 +409,14 @@ static int mpc8xxx_probe(struct platform_device *pdev)
if (devtype->gpio_dir_in_init)
devtype->gpio_dir_in_init(gc);

- irq_set_chained_handler_and_data(mpc8xxx_gc->irqn,
- mpc8xxx_gpio_irq_cascade, mpc8xxx_gc);
+ ret = request_irq(mpc8xxx_gc->irqn, mpc8xxx_gpio_irq_cascade,
+ IRQF_NO_THREAD | IRQF_SHARED, "gpio-cascade", mpc8xxx_gc);
+ if (ret) {
+ pr_err("%s: failed to request_irq(%d), ret = %d\n",
+ np->full_name, mpc8xxx_gc->irqn, ret);
+ goto err;
+ }
+
return 0;
err:
iounmap(mpc8xxx_gc->regs);
--
2.9.5

2019-09-10 18:23:01

by Fabio Estevam

Subject: Re: [PATCH v3] gpio/mpc8xxx: change irq handler from chained to normal

Hi Song,

On Mon, Sep 9, 2019 at 11:12 AM Hui Song <[email protected]> wrote:

> static void mpc8xxx_irq_unmask(struct irq_data *d)
> @@ -409,8 +409,14 @@ static int mpc8xxx_probe(struct platform_device *pdev)
> if (devtype->gpio_dir_in_init)
> devtype->gpio_dir_in_init(gc);
>
> - irq_set_chained_handler_and_data(mpc8xxx_gc->irqn,
> - mpc8xxx_gpio_irq_cascade, mpc8xxx_gc);
> + ret = request_irq(mpc8xxx_gc->irqn, mpc8xxx_gpio_irq_cascade,
> + IRQF_NO_THREAD | IRQF_SHARED, "gpio-cascade", mpc8xxx_gc);
> + if (ret) {
> + pr_err("%s: failed to request_irq(%d), ret = %d\n",

In drivers, it is preferred to use dev_err() instead of pr_err().

Please swicth for dev_err().