Significant part of GET request processing is common for most request
types but unfortunately it cannot be easily separated from type specific
code as we need to alternate between common actions (parsing common request
header, allocating message and filling netlink/genetlink headers etc.) and
specific actions (querying the device, composing the reply). The processing
also happens in three different situations: "do" request, "dump" request
and notification, each doing things in slightly different way.
The request specific code is implemented in four or five callbacks defined
in an instance of struct get_request_ops:
parse_request() - parse incoming message
prepare_data() - retrieve data from driver or NIC
reply_size() - estimate reply message size
fill_reply() - compose reply message
cleanup_data() - (optional) clean up additional data
Other members of struct get_request_ops describe the data structure holding
information from client request and data used to compose the message. The
standard handlers ethnl_get_doit(), ethnl_get_dumpit(), ethnl_get_start()
and ethnl_get_done() can be then used in genl_ops handler. Notification
handler will be introduced in a later patch.
Signed-off-by: Michal Kubecek <[email protected]>
---
net/ethtool/netlink.c | 329 ++++++++++++++++++++++++++++++++++++++++++
net/ethtool/netlink.h | 120 ++++++++++++++-
2 files changed, 448 insertions(+), 1 deletion(-)
diff --git a/net/ethtool/netlink.c b/net/ethtool/netlink.c
index ed9c0f82aca4..e5aade3b69d1 100644
--- a/net/ethtool/netlink.c
+++ b/net/ethtool/netlink.c
@@ -177,6 +177,335 @@ struct sk_buff *ethnl_reply_init(size_t payload, struct net_device *dev, u8 cmd,
return NULL;
}
+/* GET request helpers */
+
+/**
+ * struct ethnl_dump_ctx - context structure for generic dumpit() callback
+ * @ops: request ops of currently processed message type
+ * @req_info: parsed request header of processed request
+ * @pos_hash: saved iteration position - hashbucket
+ * @pos_idx: saved iteration position - index
+ *
+ * These parameters are kept in struct netlink_callback as context preserved
+ * between iterations. They are initialized by ethnl_get_start() and used in
+ * ethnl_get_dumpit() and ethnl_get_done().
+ */
+struct ethnl_dump_ctx {
+ const struct get_request_ops *ops;
+ struct ethnl_req_info *req_info;
+ struct ethnl_reply_data *reply_data;
+ int pos_hash;
+ int pos_idx;
+};
+
+static const struct get_request_ops *get_requests[__ETHTOOL_MSG_USER_CNT] = {
+};
+
+static struct ethnl_dump_ctx *ethnl_dump_context(struct netlink_callback *cb)
+{
+ return (struct ethnl_dump_ctx *)cb->ctx;
+}
+
+/**
+ * ethnl_std_parse() - Parse request message
+ * @req_info: pointer to structure to put data into
+ * @nlhdr: pointer to request message header
+ * @net: request netns
+ * @request_ops: struct request_ops for request type
+ * @extack: netlink extack for error reporting
+ * @require_dev: fail if no device identified in header
+ *
+ * Parse universal request header and call request specific ->parse_request()
+ * callback (if defined) to parse the rest of the message.
+ *
+ * Return: 0 on success or negative error code
+ */
+static int ethnl_std_parse(struct ethnl_req_info *req_info,
+ const struct nlmsghdr *nlhdr, struct net *net,
+ const struct get_request_ops *request_ops,
+ struct netlink_ext_ack *extack, bool require_dev)
+{
+ struct nlattr **tb;
+ int ret;
+
+ tb = kmalloc_array(request_ops->max_attr + 1, sizeof(tb[0]),
+ GFP_KERNEL);
+ if (!tb)
+ return -ENOMEM;
+
+ ret = nlmsg_parse(nlhdr, GENL_HDRLEN, tb, request_ops->max_attr,
+ request_ops->request_policy, extack);
+ if (ret < 0)
+ goto out;
+ ret = ethnl_parse_header(req_info, tb[request_ops->hdr_attr], net,
+ extack, request_ops->header_policy,
+ require_dev);
+ if (ret < 0)
+ goto out;
+
+ if (request_ops->parse_request) {
+ ret = request_ops->parse_request(req_info, tb, extack);
+ if (ret < 0)
+ goto out;
+ }
+
+ if (req_info->req_flags & ~request_ops->all_reqflags) {
+ ret = -EOPNOTSUPP;
+ NL_SET_ERR_MSG_ATTR(extack, tb[ETHTOOL_A_HEADER_RFLAGS],
+ "unsupported request specific flags");
+ goto out;
+ }
+
+ ret = 0;
+out:
+ kfree(tb);
+ return ret;
+}
+
+/**
+ * ethnl_init_reply_data() - Initialize reply data for GET request
+ * @req_info: pointer to embedded struct ethnl_req_info
+ * @ops: instance of struct get_request_ops describing the layout
+ * @dev: network device to initialize the reply for
+ *
+ * Fills the reply data part with zeros and sets the dev member. Must be called
+ * before calling the ->fill_reply() callback (for each iteration when handling
+ * dump requests).
+ */
+static void ethnl_init_reply_data(struct ethnl_reply_data *reply_data,
+ const struct get_request_ops *ops,
+ struct net_device *dev)
+{
+ memset(reply_data, '\0', ops->reply_data_size);
+ reply_data->dev = dev;
+}
+
+/* generic ->doit() handler for GET type requests */
+static int ethnl_get_doit(struct sk_buff *skb, struct genl_info *info)
+{
+ struct ethnl_reply_data *reply_data = NULL;
+ struct ethnl_req_info *req_info = NULL;
+ const u8 cmd = info->genlhdr->cmd;
+ const struct get_request_ops *ops;
+ struct sk_buff *rskb;
+ void *reply_payload;
+ int reply_len;
+ int ret;
+
+ ops = get_requests[cmd];
+ if (WARN_ONCE(!ops, "cmd %u has no get_request_ops\n", cmd))
+ return -EOPNOTSUPP;
+ req_info = kzalloc(ops->req_info_size, GFP_KERNEL);
+ if (!req_info)
+ return -ENOMEM;
+ reply_data = kmalloc(ops->reply_data_size, GFP_KERNEL);
+ if (!reply_data) {
+ kfree(req_info);
+ return -ENOMEM;
+ }
+
+ ret = ethnl_std_parse(req_info, info->nlhdr, genl_info_net(info), ops,
+ info->extack, !ops->allow_nodev_do);
+ if (ret < 0)
+ goto err_dev;
+ ethnl_init_reply_data(reply_data, ops, req_info->dev);
+
+ rtnl_lock();
+ ret = ops->prepare_data(req_info, reply_data, info);
+ rtnl_unlock();
+ if (ret < 0)
+ goto err_cleanup;
+ reply_len = ops->reply_size(req_info, reply_data);
+ if (ret < 0)
+ goto err_cleanup;
+ ret = -ENOMEM;
+ rskb = ethnl_reply_init(reply_len, req_info->dev, ops->reply_cmd,
+ ops->hdr_attr, info, &reply_payload);
+ if (!rskb)
+ goto err_cleanup;
+ ret = ops->fill_reply(rskb, req_info, reply_data);
+ if (ret < 0)
+ goto err_msg;
+ if (ops->cleanup_data)
+ ops->cleanup_data(reply_data);
+
+ genlmsg_end(rskb, reply_payload);
+ if (req_info->dev)
+ dev_put(req_info->dev);
+ kfree(reply_data);
+ kfree(req_info);
+ return genlmsg_reply(rskb, info);
+
+err_msg:
+ WARN_ONCE(ret == -EMSGSIZE,
+ "calculated message payload length (%d) not sufficient\n",
+ reply_len);
+ nlmsg_free(rskb);
+err_cleanup:
+ if (ops->cleanup_data)
+ ops->cleanup_data(reply_data);
+err_dev:
+ if (req_info->dev)
+ dev_put(req_info->dev);
+ kfree(reply_data);
+ kfree(req_info);
+ return ret;
+}
+
+static int ethnl_get_dump_one(struct sk_buff *skb, struct net_device *dev,
+ const struct ethnl_dump_ctx *ctx)
+{
+ int ret;
+
+ ethnl_init_reply_data(ctx->reply_data, ctx->ops, dev);
+ rtnl_lock();
+ ret = ctx->ops->prepare_data(ctx->req_info, ctx->reply_data, NULL);
+ rtnl_unlock();
+ if (ret < 0)
+ goto out;
+ ret = ethnl_fill_reply_header(skb, dev, ctx->ops->hdr_attr);
+ if (ret < 0)
+ goto out;
+ ret = ctx->ops->fill_reply(skb, ctx->req_info, ctx->reply_data);
+
+out:
+ if (ctx->ops->cleanup_data)
+ ctx->ops->cleanup_data(ctx->reply_data);
+ ctx->reply_data->dev = NULL;
+ return ret;
+}
+
+/* Generic ->dumpit() handler for GET requests. Device iteration copied from
+ * rtnl_dump_ifinfo(); we have to be more careful about device hashtable
+ * persistence as we cannot guarantee to hold RTNL lock through the whole
+ * function as rtnetnlink does.
+ */
+static int ethnl_get_dumpit(struct sk_buff *skb, struct netlink_callback *cb)
+{
+ struct ethnl_dump_ctx *ctx = ethnl_dump_context(cb);
+ struct net *net = sock_net(skb->sk);
+ int s_idx = ctx->pos_idx;
+ int h, idx = 0;
+ int ret = 0;
+ void *ehdr;
+
+ rtnl_lock();
+ for (h = ctx->pos_hash; h < NETDEV_HASHENTRIES; h++, s_idx = 0) {
+ struct hlist_head *head;
+ struct net_device *dev;
+ unsigned int seq;
+
+ head = &net->dev_index_head[h];
+
+restart_chain:
+ seq = net->dev_base_seq;
+ cb->seq = seq;
+ idx = 0;
+ hlist_for_each_entry(dev, head, index_hlist) {
+ if (idx < s_idx)
+ goto cont;
+ dev_hold(dev);
+ rtnl_unlock();
+
+ ehdr = genlmsg_put(skb, NETLINK_CB(cb->skb).portid,
+ cb->nlh->nlmsg_seq,
+ ðtool_genl_family, 0,
+ ctx->ops->reply_cmd);
+ if (!ehdr) {
+ dev_put(dev);
+ ret = -EMSGSIZE;
+ goto out;
+ }
+ ret = ethnl_get_dump_one(skb, dev, ctx);
+ dev_put(dev);
+ if (ret < 0) {
+ genlmsg_cancel(skb, ehdr);
+ if (ret == -EOPNOTSUPP)
+ goto lock_and_cont;
+ if (likely(skb->len))
+ ret = skb->len;
+ goto out;
+ }
+ genlmsg_end(skb, ehdr);
+lock_and_cont:
+ rtnl_lock();
+ if (net->dev_base_seq != seq) {
+ s_idx = idx + 1;
+ goto restart_chain;
+ }
+cont:
+ idx++;
+ }
+
+ }
+ rtnl_unlock();
+
+out:
+ ctx->pos_hash = h;
+ ctx->pos_idx = idx;
+ nl_dump_check_consistent(cb, nlmsg_hdr(skb));
+
+ return ret;
+}
+
+/* generic ->start() handler for GET requests */
+static int ethnl_get_start(struct netlink_callback *cb)
+{
+ struct ethnl_dump_ctx *ctx = ethnl_dump_context(cb);
+ struct ethnl_reply_data *reply_data;
+ const struct get_request_ops *ops;
+ struct ethnl_req_info *req_info;
+ struct genlmsghdr *ghdr;
+ int ret;
+
+ BUILD_BUG_ON(sizeof(*ctx) > sizeof(cb->ctx));
+
+ ghdr = nlmsg_data(cb->nlh);
+ ops = get_requests[ghdr->cmd];
+ if (WARN_ONCE(!ops, "cmd %u has no get_request_ops\n", ghdr->cmd))
+ return -EOPNOTSUPP;
+ req_info = kzalloc(ops->req_info_size, GFP_KERNEL);
+ if (!req_info)
+ return -ENOMEM;
+ reply_data = kmalloc(ops->reply_data_size, GFP_KERNEL);
+ if (!reply_data) {
+ kfree(req_info);
+ return -ENOMEM;
+ }
+
+ ret = ethnl_std_parse(req_info, cb->nlh, sock_net(cb->skb->sk), ops,
+ cb->extack, false);
+ if (req_info->dev) {
+ /* We ignore device specification in dump requests but as the
+ * same parser as for non-dump (doit) requests is used, it
+ * would take reference to the device if it finds one
+ */
+ dev_put(req_info->dev);
+ req_info->dev = NULL;
+ }
+ if (ret < 0)
+ return ret;
+
+ ctx->ops = ops;
+ ctx->req_info = req_info;
+ ctx->reply_data = reply_data;
+ ctx->pos_hash = 0;
+ ctx->pos_idx = 0;
+
+ return 0;
+}
+
+/* generic ->done() handler for GET requests */
+static int ethnl_get_done(struct netlink_callback *cb)
+{
+ struct ethnl_dump_ctx *ctx = ethnl_dump_context(cb);
+
+ kfree(ctx->reply_data);
+ kfree(ctx->req_info);
+
+ return 0;
+}
+
/* notifications */
typedef void (*ethnl_notify_handler_t)(struct net_device *dev, unsigned int cmd,
diff --git a/net/ethtool/netlink.h b/net/ethtool/netlink.h
index 4c0b5ca439f8..077966a33544 100644
--- a/net/ethtool/netlink.h
+++ b/net/ethtool/netlink.h
@@ -210,13 +210,30 @@ static inline unsigned int ethnl_reply_header_size(void)
nla_total_size(IFNAMSIZ));
}
+/* GET request handling */
+
+/* Unified processing of GET requests uses two data structures: request info
+ * and reply data. Request info holds information parsed from client request
+ * and its stays constant through all request processing. Reply data holds data
+ * retrieved from ethtool_ops callbacks or other internal sources which is used
+ * to compose the reply. When processing a dump request, request info is filled
+ * only once (when the request message is parsed) but reply data is filled for
+ * each reply message.
+ *
+ * Both structures consist of part common for all request types (struct
+ * ethnl_req_info and struct ethnl_reply_data defined below) and optional
+ * parts specific for each request type. Common part always starts at offset 0.
+ */
+
/**
* struct ethnl_req_info - base type of request information for GET requests
* @dev: network device the request is for (may be null)
* @global_flags: request flags common for all request types
* @req_flags: request flags specific for each request type
*
- * This is a common base, additional members may follow after this structure.
+ * This is a common base for request specific structures holding data from
+ * parsed userspace request. These always embed struct ethnl_req_info at
+ * zero offset.
*/
struct ethnl_req_info {
struct net_device *dev;
@@ -224,4 +241,105 @@ struct ethnl_req_info {
u32 req_flags;
};
+/**
+ * struct ethnl_reply_data - base type of reply data for GET requests
+ * @dev: device for current reply message; in single shot requests it is
+ * equal to ðnl_req_info.dev; in dumps it's different for each
+ * reply message
+ *
+ * This is a common base for request specific structures holding data for
+ * kernel reply message. These always embed struct ethnl_reply_data at zero
+ * offset.
+ */
+struct ethnl_reply_data {
+ struct net_device *dev;
+};
+
+static inline int ethnl_before_ops(struct net_device *dev)
+{
+ if (dev && dev->ethtool_ops->begin)
+ return dev->ethtool_ops->begin(dev);
+ else
+ return 0;
+}
+
+static inline void ethnl_after_ops(struct net_device *dev)
+{
+ if (dev && dev->ethtool_ops->complete)
+ dev->ethtool_ops->complete(dev);
+}
+
+/**
+ * struct get_request_ops - unified handling of GET requests
+ * @request_cmd: command id for request (GET)
+ * @reply_cmd: command id for reply (GET_REPLY)
+ * @hdr_attr: attribute type for request header
+ * @max_attr: maximum (top level) attribute type
+ * @req_info_size: size of request info
+ * @reply_data_size: size of reply data
+ * @request_policy: netlink policy for message contents
+ * @header_policy: (optional) netlink policy for request header
+ * @all_reqflags: allowed request specific flags
+ * @allow_nodev_do: allow non-dump request with no device identification
+ * @parse_request:
+ * Parse request except common header (struct ethnl_req_info). Common
+ * header is already filled on entry, the rest up to @repdata_offset
+ * is zero initialized. This callback should only modify type specific
+ * request info by parsed attributes from request message.
+ * @prepare_data:
+ * Retrieve and prepare data needed to compose a reply message. Calls to
+ * ethtool_ops handlers should be limited to this callback. Common reply
+ * data (struct ethnl_reply_data) is filled on entry, type specific part
+ * after it is zero initialized. This callback should only modify the
+ * type specific part of reply data. Device identification from struct
+ * ethnl_reply_data is to be used as for dump requests, it iterates
+ * through network devices which common_req_info::dev points to the
+ * device from client request.
+ * @reply_size:
+ * Estimate reply message size. Returned value must be sufficient for
+ * message payload without common reply header. The callback may returned
+ * estimate higher than actual message size if exact calculation would
+ * not be worth the saved memory space.
+ * @fill_reply:
+ * Fill reply message payload (except for common header) from reply data.
+ * The callback must not generate more payload than previously called
+ * ->reply_size() estimated.
+ * @cleanup_data:
+ * Optional cleanup called when reply data is no longer needed. Can be
+ * used e.g. to free any additional data structures outside the main
+ * structure which were allocated by ->prepare_data(). When processing
+ * dump requests, ->cleanup() is called for each message.
+ *
+ * Description of variable parts of GET request handling when using the unified
+ * infrastructure. When used, a pointer to an instance of this structure is to
+ * be added to &get_requests array and generic handlers ethnl_get_doit(),
+ * ethnl_get_dumpit(), ethnl_get_start() and ethnl_get_done() used in
+ * @ethnl_genl_ops
+ */
+struct get_request_ops {
+ u8 request_cmd;
+ u8 reply_cmd;
+ u16 hdr_attr;
+ unsigned int max_attr;
+ unsigned int req_info_size;
+ unsigned int reply_data_size;
+ const struct nla_policy *request_policy;
+ const struct nla_policy *header_policy;
+ u32 all_reqflags;
+ bool allow_nodev_do;
+
+ int (*parse_request)(struct ethnl_req_info *req_info,
+ struct nlattr **tb,
+ struct netlink_ext_ack *extack);
+ int (*prepare_data)(const struct ethnl_req_info *req_info,
+ struct ethnl_reply_data *reply_data,
+ struct genl_info *info);
+ int (*reply_size)(const struct ethnl_req_info *req_info,
+ const struct ethnl_reply_data *reply_data);
+ int (*fill_reply)(struct sk_buff *skb,
+ const struct ethnl_req_info *req_info,
+ const struct ethnl_reply_data *reply_data);
+ void (*cleanup_data)(struct ethnl_reply_data *reply_data);
+};
+
#endif /* _NET_ETHTOOL_NETLINK_H */
--
2.23.0
Wed, Oct 09, 2019 at 10:59:27PM CEST, [email protected] wrote:
>Significant part of GET request processing is common for most request
>types but unfortunately it cannot be easily separated from type specific
>code as we need to alternate between common actions (parsing common request
>header, allocating message and filling netlink/genetlink headers etc.) and
>specific actions (querying the device, composing the reply). The processing
>also happens in three different situations: "do" request, "dump" request
>and notification, each doing things in slightly different way.
>
>The request specific code is implemented in four or five callbacks defined
>in an instance of struct get_request_ops:
>
> parse_request() - parse incoming message
> prepare_data() - retrieve data from driver or NIC
> reply_size() - estimate reply message size
> fill_reply() - compose reply message
> cleanup_data() - (optional) clean up additional data
>
>Other members of struct get_request_ops describe the data structure holding
>information from client request and data used to compose the message. The
>standard handlers ethnl_get_doit(), ethnl_get_dumpit(), ethnl_get_start()
>and ethnl_get_done() can be then used in genl_ops handler. Notification
>handler will be introduced in a later patch.
>
>Signed-off-by: Michal Kubecek <[email protected]>
>---
> net/ethtool/netlink.c | 329 ++++++++++++++++++++++++++++++++++++++++++
> net/ethtool/netlink.h | 120 ++++++++++++++-
> 2 files changed, 448 insertions(+), 1 deletion(-)
>
>diff --git a/net/ethtool/netlink.c b/net/ethtool/netlink.c
>index ed9c0f82aca4..e5aade3b69d1 100644
>--- a/net/ethtool/netlink.c
>+++ b/net/ethtool/netlink.c
>@@ -177,6 +177,335 @@ struct sk_buff *ethnl_reply_init(size_t payload, struct net_device *dev, u8 cmd,
> return NULL;
> }
>
>+/* GET request helpers */
>+
>+/**
>+ * struct ethnl_dump_ctx - context structure for generic dumpit() callback
>+ * @ops: request ops of currently processed message type
>+ * @req_info: parsed request header of processed request
>+ * @pos_hash: saved iteration position - hashbucket
>+ * @pos_idx: saved iteration position - index
>+ *
>+ * These parameters are kept in struct netlink_callback as context preserved
>+ * between iterations. They are initialized by ethnl_get_start() and used in
>+ * ethnl_get_dumpit() and ethnl_get_done().
>+ */
>+struct ethnl_dump_ctx {
>+ const struct get_request_ops *ops;
>+ struct ethnl_req_info *req_info;
>+ struct ethnl_reply_data *reply_data;
>+ int pos_hash;
>+ int pos_idx;
>+};
>+
>+static const struct get_request_ops *get_requests[__ETHTOOL_MSG_USER_CNT] = {
>+};
>+
>+static struct ethnl_dump_ctx *ethnl_dump_context(struct netlink_callback *cb)
>+{
>+ return (struct ethnl_dump_ctx *)cb->ctx;
>+}
>+
>+/**
>+ * ethnl_std_parse() - Parse request message
>+ * @req_info: pointer to structure to put data into
>+ * @nlhdr: pointer to request message header
>+ * @net: request netns
>+ * @request_ops: struct request_ops for request type
>+ * @extack: netlink extack for error reporting
>+ * @require_dev: fail if no device identified in header
>+ *
>+ * Parse universal request header and call request specific ->parse_request()
>+ * callback (if defined) to parse the rest of the message.
>+ *
>+ * Return: 0 on success or negative error code
>+ */
>+static int ethnl_std_parse(struct ethnl_req_info *req_info,
"std" sounds a bit odd. Perhaps "common"?
>+ const struct nlmsghdr *nlhdr, struct net *net,
>+ const struct get_request_ops *request_ops,
>+ struct netlink_ext_ack *extack, bool require_dev)
>+{
>+ struct nlattr **tb;
>+ int ret;
>+
>+ tb = kmalloc_array(request_ops->max_attr + 1, sizeof(tb[0]),
>+ GFP_KERNEL);
>+ if (!tb)
>+ return -ENOMEM;
>+
>+ ret = nlmsg_parse(nlhdr, GENL_HDRLEN, tb, request_ops->max_attr,
>+ request_ops->request_policy, extack);
>+ if (ret < 0)
>+ goto out;
>+ ret = ethnl_parse_header(req_info, tb[request_ops->hdr_attr], net,
>+ extack, request_ops->header_policy,
>+ require_dev);
This is odd. It's the other way around in compare what I would expect.
There is a request-specific header attr that contains common header
attributes parsed in ethnl_parse_header.
Why don't you have the common header as a root then then have one nested
attr that would carry the request-specific attrs?
Similar to how it is done in rtnl IFLA_INFO_KIND.
You can parse the common stuff in pre_doit/start genl ops and you
don't have to explicitly call ethnl_parse_header.
Also, that would allow you to benefit from the genl doit/dumpit initial
attr parsing and save basically this whole function (alloc,parse).
Code would be much more simple to follow then.
Still seems to me that you use the generic netlink but you don't like
the infra too much so you make it up yourself again in parallel - that is
my feeling reading the code. I get the argument about the similarities
of the individual requests and why you have this request_ops (alhough I
don't like it too much).
>+ if (ret < 0)
>+ goto out;
>+
>+ if (request_ops->parse_request) {
>+ ret = request_ops->parse_request(req_info, tb, extack);
>+ if (ret < 0)
>+ goto out;
>+ }
>+
>+ if (req_info->req_flags & ~request_ops->all_reqflags) {
>+ ret = -EOPNOTSUPP;
>+ NL_SET_ERR_MSG_ATTR(extack, tb[ETHTOOL_A_HEADER_RFLAGS],
>+ "unsupported request specific flags");
>+ goto out;
>+ }
>+
>+ ret = 0;
>+out:
>+ kfree(tb);
>+ return ret;
>+}
>+
>+/**
>+ * ethnl_init_reply_data() - Initialize reply data for GET request
>+ * @req_info: pointer to embedded struct ethnl_req_info
>+ * @ops: instance of struct get_request_ops describing the layout
>+ * @dev: network device to initialize the reply for
>+ *
>+ * Fills the reply data part with zeros and sets the dev member. Must be called
>+ * before calling the ->fill_reply() callback (for each iteration when handling
>+ * dump requests).
>+ */
>+static void ethnl_init_reply_data(struct ethnl_reply_data *reply_data,
>+ const struct get_request_ops *ops,
>+ struct net_device *dev)
>+{
>+ memset(reply_data, '\0', ops->reply_data_size);
Just "0" would do too.
>+ reply_data->dev = dev;
>+}
>+
>+/* generic ->doit() handler for GET type requests */
>+static int ethnl_get_doit(struct sk_buff *skb, struct genl_info *info)
>+{
>+ struct ethnl_reply_data *reply_data = NULL;
>+ struct ethnl_req_info *req_info = NULL;
>+ const u8 cmd = info->genlhdr->cmd;
>+ const struct get_request_ops *ops;
>+ struct sk_buff *rskb;
>+ void *reply_payload;
>+ int reply_len;
>+ int ret;
>+
>+ ops = get_requests[cmd];
>+ if (WARN_ONCE(!ops, "cmd %u has no get_request_ops\n", cmd))
>+ return -EOPNOTSUPP;
>+ req_info = kzalloc(ops->req_info_size, GFP_KERNEL);
>+ if (!req_info)
>+ return -ENOMEM;
>+ reply_data = kmalloc(ops->reply_data_size, GFP_KERNEL);
>+ if (!reply_data) {
>+ kfree(req_info);
>+ return -ENOMEM;
>+ }
>+
>+ ret = ethnl_std_parse(req_info, info->nlhdr, genl_info_net(info), ops,
>+ info->extack, !ops->allow_nodev_do);
>+ if (ret < 0)
>+ goto err_dev;
>+ ethnl_init_reply_data(reply_data, ops, req_info->dev);
>+
>+ rtnl_lock();
>+ ret = ops->prepare_data(req_info, reply_data, info);
>+ rtnl_unlock();
>+ if (ret < 0)
>+ goto err_cleanup;
>+ reply_len = ops->reply_size(req_info, reply_data);
>+ if (ret < 0)
>+ goto err_cleanup;
>+ ret = -ENOMEM;
>+ rskb = ethnl_reply_init(reply_len, req_info->dev, ops->reply_cmd,
>+ ops->hdr_attr, info, &reply_payload);
>+ if (!rskb)
>+ goto err_cleanup;
>+ ret = ops->fill_reply(rskb, req_info, reply_data);
>+ if (ret < 0)
>+ goto err_msg;
>+ if (ops->cleanup_data)
>+ ops->cleanup_data(reply_data);
>+
>+ genlmsg_end(rskb, reply_payload);
>+ if (req_info->dev)
>+ dev_put(req_info->dev);
>+ kfree(reply_data);
>+ kfree(req_info);
>+ return genlmsg_reply(rskb, info);
>+
>+err_msg:
>+ WARN_ONCE(ret == -EMSGSIZE,
No need to wrap here (and in other similar cases)
>+ "calculated message payload length (%d) not sufficient\n",
>+ reply_len);
>+ nlmsg_free(rskb);
>+err_cleanup:
>+ if (ops->cleanup_data)
>+ ops->cleanup_data(reply_data);
>+err_dev:
>+ if (req_info->dev)
>+ dev_put(req_info->dev);
>+ kfree(reply_data);
>+ kfree(req_info);
>+ return ret;
>+}
>+
>+static int ethnl_get_dump_one(struct sk_buff *skb, struct net_device *dev,
>+ const struct ethnl_dump_ctx *ctx)
>+{
>+ int ret;
>+
>+ ethnl_init_reply_data(ctx->reply_data, ctx->ops, dev);
>+ rtnl_lock();
>+ ret = ctx->ops->prepare_data(ctx->req_info, ctx->reply_data, NULL);
>+ rtnl_unlock();
>+ if (ret < 0)
>+ goto out;
>+ ret = ethnl_fill_reply_header(skb, dev, ctx->ops->hdr_attr);
>+ if (ret < 0)
>+ goto out;
>+ ret = ctx->ops->fill_reply(skb, ctx->req_info, ctx->reply_data);
>+
>+out:
>+ if (ctx->ops->cleanup_data)
>+ ctx->ops->cleanup_data(ctx->reply_data);
>+ ctx->reply_data->dev = NULL;
>+ return ret;
>+}
>+
>+/* Generic ->dumpit() handler for GET requests. Device iteration copied from
>+ * rtnl_dump_ifinfo(); we have to be more careful about device hashtable
>+ * persistence as we cannot guarantee to hold RTNL lock through the whole
>+ * function as rtnetnlink does.
>+ */
>+static int ethnl_get_dumpit(struct sk_buff *skb, struct netlink_callback *cb)
>+{
>+ struct ethnl_dump_ctx *ctx = ethnl_dump_context(cb);
>+ struct net *net = sock_net(skb->sk);
>+ int s_idx = ctx->pos_idx;
>+ int h, idx = 0;
>+ int ret = 0;
>+ void *ehdr;
>+
>+ rtnl_lock();
>+ for (h = ctx->pos_hash; h < NETDEV_HASHENTRIES; h++, s_idx = 0) {
>+ struct hlist_head *head;
>+ struct net_device *dev;
>+ unsigned int seq;
>+
>+ head = &net->dev_index_head[h];
>+
>+restart_chain:
>+ seq = net->dev_base_seq;
>+ cb->seq = seq;
>+ idx = 0;
>+ hlist_for_each_entry(dev, head, index_hlist) {
>+ if (idx < s_idx)
>+ goto cont;
>+ dev_hold(dev);
>+ rtnl_unlock();
>+
>+ ehdr = genlmsg_put(skb, NETLINK_CB(cb->skb).portid,
>+ cb->nlh->nlmsg_seq,
>+ ðtool_genl_family, 0,
>+ ctx->ops->reply_cmd);
>+ if (!ehdr) {
>+ dev_put(dev);
>+ ret = -EMSGSIZE;
>+ goto out;
>+ }
>+ ret = ethnl_get_dump_one(skb, dev, ctx);
>+ dev_put(dev);
>+ if (ret < 0) {
>+ genlmsg_cancel(skb, ehdr);
>+ if (ret == -EOPNOTSUPP)
>+ goto lock_and_cont;
>+ if (likely(skb->len))
>+ ret = skb->len;
>+ goto out;
>+ }
>+ genlmsg_end(skb, ehdr);
>+lock_and_cont:
>+ rtnl_lock();
>+ if (net->dev_base_seq != seq) {
>+ s_idx = idx + 1;
>+ goto restart_chain;
>+ }
>+cont:
>+ idx++;
>+ }
>+
>+ }
>+ rtnl_unlock();
>+
>+out:
>+ ctx->pos_hash = h;
>+ ctx->pos_idx = idx;
>+ nl_dump_check_consistent(cb, nlmsg_hdr(skb));
>+
>+ return ret;
>+}
>+
>+/* generic ->start() handler for GET requests */
>+static int ethnl_get_start(struct netlink_callback *cb)
>+{
>+ struct ethnl_dump_ctx *ctx = ethnl_dump_context(cb);
>+ struct ethnl_reply_data *reply_data;
>+ const struct get_request_ops *ops;
>+ struct ethnl_req_info *req_info;
>+ struct genlmsghdr *ghdr;
>+ int ret;
>+
>+ BUILD_BUG_ON(sizeof(*ctx) > sizeof(cb->ctx));
>+
>+ ghdr = nlmsg_data(cb->nlh);
>+ ops = get_requests[ghdr->cmd];
>+ if (WARN_ONCE(!ops, "cmd %u has no get_request_ops\n", ghdr->cmd))
>+ return -EOPNOTSUPP;
>+ req_info = kzalloc(ops->req_info_size, GFP_KERNEL);
>+ if (!req_info)
>+ return -ENOMEM;
>+ reply_data = kmalloc(ops->reply_data_size, GFP_KERNEL);
>+ if (!reply_data) {
>+ kfree(req_info);
>+ return -ENOMEM;
>+ }
>+
>+ ret = ethnl_std_parse(req_info, cb->nlh, sock_net(cb->skb->sk), ops,
>+ cb->extack, false);
>+ if (req_info->dev) {
>+ /* We ignore device specification in dump requests but as the
>+ * same parser as for non-dump (doit) requests is used, it
>+ * would take reference to the device if it finds one
>+ */
>+ dev_put(req_info->dev);
>+ req_info->dev = NULL;
>+ }
>+ if (ret < 0)
>+ return ret;
>+
>+ ctx->ops = ops;
>+ ctx->req_info = req_info;
>+ ctx->reply_data = reply_data;
>+ ctx->pos_hash = 0;
>+ ctx->pos_idx = 0;
>+
>+ return 0;
>+}
>+
>+/* generic ->done() handler for GET requests */
>+static int ethnl_get_done(struct netlink_callback *cb)
>+{
>+ struct ethnl_dump_ctx *ctx = ethnl_dump_context(cb);
>+
>+ kfree(ctx->reply_data);
>+ kfree(ctx->req_info);
>+
>+ return 0;
>+}
>+
> /* notifications */
>
> typedef void (*ethnl_notify_handler_t)(struct net_device *dev, unsigned int cmd,
>diff --git a/net/ethtool/netlink.h b/net/ethtool/netlink.h
>index 4c0b5ca439f8..077966a33544 100644
>--- a/net/ethtool/netlink.h
>+++ b/net/ethtool/netlink.h
>@@ -210,13 +210,30 @@ static inline unsigned int ethnl_reply_header_size(void)
> nla_total_size(IFNAMSIZ));
> }
>
>+/* GET request handling */
>+
>+/* Unified processing of GET requests uses two data structures: request info
>+ * and reply data. Request info holds information parsed from client request
>+ * and its stays constant through all request processing. Reply data holds data
>+ * retrieved from ethtool_ops callbacks or other internal sources which is used
>+ * to compose the reply. When processing a dump request, request info is filled
>+ * only once (when the request message is parsed) but reply data is filled for
>+ * each reply message.
>+ *
>+ * Both structures consist of part common for all request types (struct
>+ * ethnl_req_info and struct ethnl_reply_data defined below) and optional
>+ * parts specific for each request type. Common part always starts at offset 0.
>+ */
>+
> /**
> * struct ethnl_req_info - base type of request information for GET requests
> * @dev: network device the request is for (may be null)
> * @global_flags: request flags common for all request types
> * @req_flags: request flags specific for each request type
> *
>- * This is a common base, additional members may follow after this structure.
>+ * This is a common base for request specific structures holding data from
>+ * parsed userspace request. These always embed struct ethnl_req_info at
>+ * zero offset.
> */
> struct ethnl_req_info {
> struct net_device *dev;
>@@ -224,4 +241,105 @@ struct ethnl_req_info {
> u32 req_flags;
> };
>
>+/**
>+ * struct ethnl_reply_data - base type of reply data for GET requests
>+ * @dev: device for current reply message; in single shot requests it is
>+ * equal to ðnl_req_info.dev; in dumps it's different for each
>+ * reply message
>+ *
>+ * This is a common base for request specific structures holding data for
>+ * kernel reply message. These always embed struct ethnl_reply_data at zero
>+ * offset.
>+ */
>+struct ethnl_reply_data {
>+ struct net_device *dev;
>+};
>+
>+static inline int ethnl_before_ops(struct net_device *dev)
>+{
>+ if (dev && dev->ethtool_ops->begin)
>+ return dev->ethtool_ops->begin(dev);
>+ else
>+ return 0;
>+}
>+
>+static inline void ethnl_after_ops(struct net_device *dev)
>+{
>+ if (dev && dev->ethtool_ops->complete)
>+ dev->ethtool_ops->complete(dev);
>+}
>+
>+/**
>+ * struct get_request_ops - unified handling of GET requests
>+ * @request_cmd: command id for request (GET)
>+ * @reply_cmd: command id for reply (GET_REPLY)
>+ * @hdr_attr: attribute type for request header
>+ * @max_attr: maximum (top level) attribute type
>+ * @req_info_size: size of request info
>+ * @reply_data_size: size of reply data
>+ * @request_policy: netlink policy for message contents
>+ * @header_policy: (optional) netlink policy for request header
>+ * @all_reqflags: allowed request specific flags
>+ * @allow_nodev_do: allow non-dump request with no device identification
>+ * @parse_request:
>+ * Parse request except common header (struct ethnl_req_info). Common
>+ * header is already filled on entry, the rest up to @repdata_offset
>+ * is zero initialized. This callback should only modify type specific
>+ * request info by parsed attributes from request message.
>+ * @prepare_data:
>+ * Retrieve and prepare data needed to compose a reply message. Calls to
>+ * ethtool_ops handlers should be limited to this callback. Common reply
>+ * data (struct ethnl_reply_data) is filled on entry, type specific part
>+ * after it is zero initialized. This callback should only modify the
>+ * type specific part of reply data. Device identification from struct
>+ * ethnl_reply_data is to be used as for dump requests, it iterates
>+ * through network devices which common_req_info::dev points to the
First time I see this notation. Is "::" something common in kernel code?
>+ * device from client request.
>+ * @reply_size:
>+ * Estimate reply message size. Returned value must be sufficient for
>+ * message payload without common reply header. The callback may returned
>+ * estimate higher than actual message size if exact calculation would
>+ * not be worth the saved memory space.
>+ * @fill_reply:
>+ * Fill reply message payload (except for common header) from reply data.
>+ * The callback must not generate more payload than previously called
>+ * ->reply_size() estimated.
>+ * @cleanup_data:
>+ * Optional cleanup called when reply data is no longer needed. Can be
>+ * used e.g. to free any additional data structures outside the main
>+ * structure which were allocated by ->prepare_data(). When processing
>+ * dump requests, ->cleanup() is called for each message.
>+ *
>+ * Description of variable parts of GET request handling when using the unified
>+ * infrastructure. When used, a pointer to an instance of this structure is to
>+ * be added to &get_requests array and generic handlers ethnl_get_doit(),
>+ * ethnl_get_dumpit(), ethnl_get_start() and ethnl_get_done() used in
>+ * @ethnl_genl_ops
>+ */
>+struct get_request_ops {
Could you please have "ethnl_" prefix for things like this.
"get_request_ops" sounds way to generic.
>+ u8 request_cmd;
>+ u8 reply_cmd;
>+ u16 hdr_attr;
>+ unsigned int max_attr;
>+ unsigned int req_info_size;
>+ unsigned int reply_data_size;
>+ const struct nla_policy *request_policy;
>+ const struct nla_policy *header_policy;
>+ u32 all_reqflags;
>+ bool allow_nodev_do;
>+
>+ int (*parse_request)(struct ethnl_req_info *req_info,
>+ struct nlattr **tb,
>+ struct netlink_ext_ack *extack);
>+ int (*prepare_data)(const struct ethnl_req_info *req_info,
>+ struct ethnl_reply_data *reply_data,
>+ struct genl_info *info);
>+ int (*reply_size)(const struct ethnl_req_info *req_info,
>+ const struct ethnl_reply_data *reply_data);
>+ int (*fill_reply)(struct sk_buff *skb,
>+ const struct ethnl_req_info *req_info,
>+ const struct ethnl_reply_data *reply_data);
>+ void (*cleanup_data)(struct ethnl_reply_data *reply_data);
>+};
>+
> #endif /* _NET_ETHTOOL_NETLINK_H */
>--
>2.23.0
>
Wed, Oct 09, 2019 at 10:59:27PM CEST, [email protected] wrote:
[...]
>+static const struct get_request_ops *get_requests[__ETHTOOL_MSG_USER_CNT] = {
I think that prefix would be good here as well:
+static const struct ethnl_get_request_ops *
ethnl_get_requests[__ETHTOOL_MSG_USER_CNT] = {
[...]
On Thu, Oct 10, 2019 at 03:56:39PM +0200, Jiri Pirko wrote:
> Wed, Oct 09, 2019 at 10:59:27PM CEST, [email protected] wrote:
> >+/**
> >+ * ethnl_std_parse() - Parse request message
> >+ * @req_info: pointer to structure to put data into
> >+ * @nlhdr: pointer to request message header
> >+ * @net: request netns
> >+ * @request_ops: struct request_ops for request type
> >+ * @extack: netlink extack for error reporting
> >+ * @require_dev: fail if no device identified in header
> >+ *
> >+ * Parse universal request header and call request specific ->parse_request()
> >+ * callback (if defined) to parse the rest of the message.
> >+ *
> >+ * Return: 0 on success or negative error code
> >+ */
> >+static int ethnl_std_parse(struct ethnl_req_info *req_info,
>
> "std" sounds a bit odd. Perhaps "common"?
It could be "common". The reason I used "standard" was that this parser
is only used by (GET) request types which use the standard doit/dumpit
handlers. Request types using their own (nonstandard) handlers will also
do parsing on their own.
> >+ const struct nlmsghdr *nlhdr, struct net *net,
> >+ const struct get_request_ops *request_ops,
> >+ struct netlink_ext_ack *extack, bool require_dev)
> >+{
> >+ struct nlattr **tb;
> >+ int ret;
> >+
> >+ tb = kmalloc_array(request_ops->max_attr + 1, sizeof(tb[0]),
> >+ GFP_KERNEL);
> >+ if (!tb)
> >+ return -ENOMEM;
> >+
> >+ ret = nlmsg_parse(nlhdr, GENL_HDRLEN, tb, request_ops->max_attr,
> >+ request_ops->request_policy, extack);
> >+ if (ret < 0)
> >+ goto out;
> >+ ret = ethnl_parse_header(req_info, tb[request_ops->hdr_attr], net,
> >+ extack, request_ops->header_policy,
> >+ require_dev);
>
> This is odd. It's the other way around in compare what I would expect.
> There is a request-specific header attr that contains common header
> attributes parsed in ethnl_parse_header.
>
> Why don't you have the common header as a root then then have one nested
> attr that would carry the request-specific attrs?
>
> Similar to how it is done in rtnl IFLA_INFO_KIND.
To me, what you suggest feels much more odd. I thought about it last
time, I thought about it now and the only reason for such layout I could
come with would be to work around the unfortunate design flaw of the way
validation and parsing is done in genetlink (see below).
The situation with IFLA_INFO_KIND is a bit different, what you suggest
would rather correspond to having only attributes common for all RTNL on
top level and hiding all IFLA_* attributes into a nest (and the same
with attributes specific to "ip addr", "ip route", "ip rule" etc.)
> You can parse the common stuff in pre_doit/start genl ops and you
> don't have to explicitly call ethnl_parse_header.
> Also, that would allow you to benefit from the genl doit/dumpit initial
> attr parsing and save basically this whole function (alloc,parse).
>
> Code would be much more simple to follow then.
>
> Still seems to me that you use the generic netlink but you don't like
> the infra too much so you make it up yourself again in parallel - that is
> my feeling reading the code. I get the argument about the similarities
> of the individual requests and why you have this request_ops (alhough I
> don't like it too much).
The only thing I don't like about the genetlink infrastructure is the
design decision that policy and corresponding maxattr is an attribute of
the family rather than a command. This forces anyone who wants to use it
to essentially have one common message format for all commands and if
that is not possible, to do what you suggest above, hide the actual
request into a nest.
Whether you use one common attribute type for "command specific nest" or
different attribute for each request type, you do not actually make
things simpler, you just move the complexity one level lower. You will
still have to do your own (per request) parsing of the actual request,
the only difference is that you will do it in a different place and use
nla_parse_nested() rather than nlmsg_parse().
Rather than bending the message layout to fit into the limitations of
unified genetlink parsing, I prefer to keep the logical message
structure and do the parsing on my own.
> >+static void ethnl_init_reply_data(struct ethnl_reply_data *reply_data,
> >+ const struct get_request_ops *ops,
> >+ struct net_device *dev)
> >+{
> >+ memset(reply_data, '\0', ops->reply_data_size);
>
> Just "0" would do too.
OK
> >+
> >+err_msg:
> >+ WARN_ONCE(ret == -EMSGSIZE,
>
> No need to wrap here (and in other similar cases)
OK
> >+ "calculated message payload length (%d) not sufficient\n",
> >+ reply_len);
...
> >+ * @prepare_data:
> >+ * Retrieve and prepare data needed to compose a reply message. Calls to
> >+ * ethtool_ops handlers should be limited to this callback. Common reply
> >+ * data (struct ethnl_reply_data) is filled on entry, type specific part
> >+ * after it is zero initialized. This callback should only modify the
> >+ * type specific part of reply data. Device identification from struct
> >+ * ethnl_reply_data is to be used as for dump requests, it iterates
> >+ * through network devices which common_req_info::dev points to the
>
> First time I see this notation. Is "::" something common in kernel code?
It's sometimes used to denote a struct member but I don't know if it's
common in kernel documentation. I'll write it explicitly.
> >+struct get_request_ops {
>
> Could you please have "ethnl_" prefix for things like this.
> "get_request_ops" sounds way to generic.
OK
Michal
On Thu, 2019-10-10 at 20:04 +0200, Michal Kubecek wrote:
>
> The only thing I don't like about the genetlink infrastructure is the
> design decision that policy and corresponding maxattr is an attribute of
> the family rather than a command. This forces anyone who wants to use it
> to essentially have one common message format for all commands and if
> that is not possible, to do what you suggest above, hide the actual
> request into a nest.
>
> Whether you use one common attribute type for "command specific nest" or
> different attribute for each request type, you do not actually make
> things simpler, you just move the complexity one level lower. You will
> still have to do your own (per request) parsing of the actual request,
> the only difference is that you will do it in a different place and use
> nla_parse_nested() rather than nlmsg_parse().
>
> Rather than bending the message layout to fit into the limitations of
> unified genetlink parsing, I prefer to keep the logical message
> structure and do the parsing on my own.
I can't really agree with this.
Having a common format is way more accessible. Generic netlink (now)
even exposes the policy (if set) and all of its nested sub-policies to
userspace (if you use NLA_POLICY_NESTED), so it's very easy to discover
what's in the policy and how it'll be interpreted.
This makes it really easy to have tools for introspection, or have
common debugging tools that just understand the message format based on
the kernel's policy.
It's also much easier this way to not mess up things like "attribute # 7
always means a netdev index". You solved that by nesting the common
bits, though the part about ETHTOOL_A_HEADER_RFLAGS actually seems ...
wrong? Shouldn't that have been somewhere else? Or does that mean each
and every request_policy has to have this at the same index? That sounds
error prone ...
But you even have *two* policies for each kind of message, one for the
content and one for the header...?
It almost seems though that your argument isn't so much on the actual
hierarchy/nesting structure of the message itself, but the easy of
parsing it?
I have thought previous that it might make sense to create a
hierarchical representation of the message, with the nested TBs pre-
parsed too in generic netlink, so you wouldn't just have a common
attrbuf but (optionally) allocate nested attrbufs for those nested
attributes that are present, and give a way of accessing those.
I really do think that a single policy that's exposed for introspection
and links its nested sub-policies for the different sub-commands (which
are then also exposed to introspection) is much superior to having it
all just driven by the code like this.
johannes
On Thu, Oct 10, 2019 at 08:18:05PM +0200, Johannes Berg wrote:
> On Thu, 2019-10-10 at 20:04 +0200, Michal Kubecek wrote:
> >
> > The only thing I don't like about the genetlink infrastructure is the
> > design decision that policy and corresponding maxattr is an attribute of
> > the family rather than a command. This forces anyone who wants to use it
> > to essentially have one common message format for all commands and if
> > that is not possible, to do what you suggest above, hide the actual
> > request into a nest.
> >
> > Whether you use one common attribute type for "command specific nest" or
> > different attribute for each request type, you do not actually make
> > things simpler, you just move the complexity one level lower. You will
> > still have to do your own (per request) parsing of the actual request,
> > the only difference is that you will do it in a different place and use
> > nla_parse_nested() rather than nlmsg_parse().
> >
> > Rather than bending the message layout to fit into the limitations of
> > unified genetlink parsing, I prefer to keep the logical message
> > structure and do the parsing on my own.
>
> I can't really agree with this.
>
> Having a common format is way more accessible. Generic netlink (now)
> even exposes the policy (if set) and all of its nested sub-policies to
> userspace (if you use NLA_POLICY_NESTED), so it's very easy to discover
> what's in the policy and how it'll be interpreted.
This, however, would require a different design that Jiri proposed. What
he proposed was one attribute type for "request specific attributes".
But to be able to perform nested validation of the whole message and
export all policies would, with current genetlink design, require having
one such attribute type for each request type (command).
But that would also require an extra check that the request message
contains only the attribute matching its command (request type) so that
the validation performed by genetlink would still be incomplete (it will
always be incomplete as there are lots of strange constraints which
cannot be described by a policy).
Unless you suggest to effectively have just one command and determine
the request type based on which of these request specific attributes is
present (and define what to do if there is more than one).
> This makes it really easy to have tools for introspection, or have
> common debugging tools that just understand the message format based on
> the kernel's policy.
>
> It's also much easier this way to not mess up things like "attribute # 7
> always means a netdev index". You solved that by nesting the common
> bits, though the part about ETHTOOL_A_HEADER_RFLAGS actually seems ...
> wrong? Shouldn't that have been somewhere else? Or does that mean each
> and every request_policy has to have this at the same index? That sounds
> error prone ...
ETHTOOL_A_HEADER_RFLAGS is a constant, it's always the same. Yes,
logically it would rather belong outside header and maybe should be
replaced by a (possibly empty) set of NLA_FLAG attributes. If having it
in the common header is such a big problem, I'll move it out.
> But you even have *two* policies for each kind of message, one for the
> content and one for the header...?
As I said in reply to another patch, it turns out that the only reason
for having a per request header policy was rejecting
ETHTOOL_A_HEADER_RFLAGS for requests which do not define any request
flags but that's probably an overkill so that one universal header
policy would be sufficient.
> It almost seems though that your argument isn't so much on the actual
> hierarchy/nesting structure of the message itself, but the easy of
> parsing it?
It's both. I still feel that from logical point of view it makes much
more sense to use top level attributes for what the message is actually
about. Nothing you said convinced me otherwise, rather the opposite: it
only confirmed that the only reason for hiding the actual request
contents one level below is to work around the consequences of the
decision to make policy in genetlink per family rather than per command.
> I have thought previous that it might make sense to create a
> hierarchical representation of the message, with the nested TBs pre-
> parsed too in generic netlink, so you wouldn't just have a common
> attrbuf but (optionally) allocate nested attrbufs for those nested
> attributes that are present, and give a way of accessing those.
>
> I really do think that a single policy that's exposed for introspection
> and links its nested sub-policies for the different sub-commands (which
> are then also exposed to introspection) is much superior to having it
> all just driven by the code like this.
I still don't see any reason why all this could not work with per
command policies and would be principially dependent on having one
universal policy for the whole family.
Michal Kubecek
Thu, Oct 10, 2019 at 08:04:01PM CEST, [email protected] wrote:
>On Thu, Oct 10, 2019 at 03:56:39PM +0200, Jiri Pirko wrote:
>> Wed, Oct 09, 2019 at 10:59:27PM CEST, [email protected] wrote:
[...]
>> >+ const struct nlmsghdr *nlhdr, struct net *net,
>> >+ const struct get_request_ops *request_ops,
>> >+ struct netlink_ext_ack *extack, bool require_dev)
>> >+{
>> >+ struct nlattr **tb;
>> >+ int ret;
>> >+
>> >+ tb = kmalloc_array(request_ops->max_attr + 1, sizeof(tb[0]),
>> >+ GFP_KERNEL);
>> >+ if (!tb)
>> >+ return -ENOMEM;
>> >+
>> >+ ret = nlmsg_parse(nlhdr, GENL_HDRLEN, tb, request_ops->max_attr,
>> >+ request_ops->request_policy, extack);
>> >+ if (ret < 0)
>> >+ goto out;
>> >+ ret = ethnl_parse_header(req_info, tb[request_ops->hdr_attr], net,
>> >+ extack, request_ops->header_policy,
>> >+ require_dev);
>>
>> This is odd. It's the other way around in compare what I would expect.
>> There is a request-specific header attr that contains common header
>> attributes parsed in ethnl_parse_header.
>>
>> Why don't you have the common header as a root then then have one nested
>> attr that would carry the request-specific attrs?
>>
>> Similar to how it is done in rtnl IFLA_INFO_KIND.
>
>To me, what you suggest feels much more odd. I thought about it last
>time, I thought about it now and the only reason for such layout I could
>come with would be to work around the unfortunate design flaw of the way
>validation and parsing is done in genetlink (see below).
>
>The situation with IFLA_INFO_KIND is a bit different, what you suggest
>would rather correspond to having only attributes common for all RTNL on
>top level and hiding all IFLA_* attributes into a nest (and the same
>with attributes specific to "ip addr", "ip route", "ip rule" etc.)
>
>> You can parse the common stuff in pre_doit/start genl ops and you
>> don't have to explicitly call ethnl_parse_header.
>> Also, that would allow you to benefit from the genl doit/dumpit initial
>> attr parsing and save basically this whole function (alloc,parse).
>>
>> Code would be much more simple to follow then.
>>
>> Still seems to me that you use the generic netlink but you don't like
>> the infra too much so you make it up yourself again in parallel - that is
>> my feeling reading the code. I get the argument about the similarities
>> of the individual requests and why you have this request_ops (alhough I
>> don't like it too much).
>
>The only thing I don't like about the genetlink infrastructure is the
>design decision that policy and corresponding maxattr is an attribute of
>the family rather than a command. This forces anyone who wants to use it
>to essentially have one common message format for all commands and if
>that is not possible, to do what you suggest above, hide the actual
>request into a nest.
But that is fine, the genetlink code would parse the common attributes
for you according to the family, then you inside ethnl_get_doit prepare
(alloc, parse) data for ops->prepare_data and other callbacks, according
to per-request ops->policy and ops->maxattr.
Then the request callbacks would get parsed attrs according to their
type. And you can use similar technique for set dumpit/ops. Would be
neat.
>
>Whether you use one common attribute type for "command specific nest" or
>different attribute for each request type, you do not actually make
>things simpler, you just move the complexity one level lower. You will
>still have to do your own (per request) parsing of the actual request,
>the only difference is that you will do it in a different place and use
>nla_parse_nested() rather than nlmsg_parse().
>
>Rather than bending the message layout to fit into the limitations of
>unified genetlink parsing, I prefer to keep the logical message
>structure and do the parsing on my own.
You are going to still have it but the person looking at the traffic by
nlmon would know what is happening and also you are going to use
genetlink in non-abusive way :)
>
[...]
On Thu, 2019-10-10 at 22:00 +0200, Michal Kubecek wrote:
>
> > Having a common format is way more accessible. Generic netlink (now)
> > even exposes the policy (if set) and all of its nested sub-policies to
> > userspace (if you use NLA_POLICY_NESTED), so it's very easy to discover
> > what's in the policy and how it'll be interpreted.
>
> This, however, would require a different design that Jiri proposed. What
> he proposed was one attribute type for "request specific attributes".
> But to be able to perform nested validation of the whole message and
> export all policies would, with current genetlink design, require having
> one such attribute type for each request type (command).
Yes, indeed, that's true.
We actually used to have per-command policy in genetlink, but I removed
it as there was only one user, and it would've made the introspection
stuff a lot more complicated and it wasted quite a bit of memory in the
ops tables for everyone else.
Maybe we *do* want this back, with a nested policy pointing to the
common like you have. Then you'd have the option to do exactly what you
do here, but have introspection & common validation.
Actually, it's only half true that we had this - it was that the
*policy* was in the op, but the *maxattr* was in the family. This never
really makes any sense.
(IMHO we really should try to find a way to embed the maxattr into the
family, passing both always is very tiring. Perhaps just having a
terminator entry would be sufficient, or using a trick similar to what I
did with strict_start_type, and putting it into the 0th entry that's
usually unused? Even where the 0th entry *is* used, as long as the type
isn't something that relies on the validation data, we could do that.
But this is totally an aside...)
> But that would also require an extra check that the request message
> contains only the attribute matching its command (request type) so that
> the validation performed by genetlink would still be incomplete (it will
> always be incomplete as there are lots of strange constraints which
> cannot be described by a policy).
Also true, yes.
> Unless you suggest to effectively have just one command and determine
> the request type based on which of these request specific attributes is
> present (and define what to do if there is more than one).
Also possible, I guess, I can't say that's much better.
> ETHTOOL_A_HEADER_RFLAGS is a constant, it's always the same. Yes,
> logically it would rather belong outside header and maybe should be
> replaced by a (possibly empty) set of NLA_FLAG attributes. If having it
> in the common header is such a big problem, I'll move it out.
NLA_FLAG tends to be large - I think having a bitmap is fine.
Btw, you can also have a common *fixed* header in the genetlink family.
I don't think anyone does that, but it's possible.
> > But you even have *two* policies for each kind of message, one for the
> > content and one for the header...?
>
> As I said in reply to another patch, it turns out that the only reason
> for having a per request header policy was rejecting
> ETHTOOL_A_HEADER_RFLAGS for requests which do not define any request
> flags but that's probably an overkill so that one universal header
> policy would be sufficient.
Missed that, OK.
> > It almost seems though that your argument isn't so much on the actual
> > hierarchy/nesting structure of the message itself, but the easy of
> > parsing it?
>
> It's both. I still feel that from logical point of view it makes much
> more sense to use top level attributes for what the message is actually
> about. Nothing you said convinced me otherwise, rather the opposite: it
> only confirmed that the only reason for hiding the actual request
> contents one level below is to work around the consequences of the
> decision to make policy in genetlink per family rather than per command.
As I said above, it was actually the other way around and I changed it
relatively recently.
I don't have any strong objections to changing that really, it just
wasn't really used by anyone.
> I still don't see any reason why all this could not work with per
> command policies and would be principially dependent on having one
> universal policy for the whole family.
True, it just makes the code to expose it more complex (and uses more
space in the ops tables.)
If we do bring that back then IMHO it should be done properly and not
have a maxattr in the family, but with each policy. There could still
be a single maxattr (that must be >= max of all maxattrs) for the whole
family to ease allocation, but that could also just be derived as the
max(maxattr of all possible policies) at family registration time.
I'm almost thinking if we do that we should have a "struct
genl_ops_with_policy" and a second ops pointer in the family, so that
families not using this don't have to have a policy pointer & maxattr
for each op, the op struct now is 5 pointers long, so adding
policy/maxattr would cost us an increase of 20% on 64-bit and 40% on 32-
bit ... For families that don't need it, that's pretty large.
johannes