Remove variable assignment in if statements in
drivers/staging/isdn/avm/b1.c.
Issues reported by checkpatch.pl as:
ERROR: do not use assignment in if condition
Also refactor code around some if statements to remove comparisons
to NULL and unnecessary braces in single statement blocks.
Signed-off-by: Wambui Karuga <[email protected]>
---
drivers/staging/isdn/avm/b1.c | 41 ++++++++++++++++++++++++-----------
1 file changed, 28 insertions(+), 13 deletions(-)
diff --git a/drivers/staging/isdn/avm/b1.c b/drivers/staging/isdn/avm/b1.c
index 40ca1e8fa09f..32ec8cf31fd0 100644
--- a/drivers/staging/isdn/avm/b1.c
+++ b/drivers/staging/isdn/avm/b1.c
@@ -261,9 +261,10 @@ int b1_loaded(avmcard *card)
b1_put_byte(base, SEND_POLL);
for (stop = jiffies + tout * HZ; time_before(jiffies, stop);) {
if (b1_rx_full(base)) {
- if ((ans = b1_get_byte(base)) == RECEIVE_POLL) {
+ ans = b1_get_byte(base);
+ if (ans == RECEIVE_POLL)
return 1;
- }
+
printk(KERN_ERR "%s: b1_loaded: got 0x%x, firmware not running\n",
card->name, ans);
return 0;
@@ -284,8 +285,9 @@ int b1_load_firmware(struct capi_ctr *ctrl, capiloaddata *data)
int retval;
b1_reset(port);
+ retval = b1_load_t4file(card, &data->firmware);
- if ((retval = b1_load_t4file(card, &data->firmware))) {
+ if (retval) {
b1_reset(port);
printk(KERN_ERR "%s: failed to load t4file!!\n",
card->name);
@@ -295,7 +297,8 @@ int b1_load_firmware(struct capi_ctr *ctrl, capiloaddata *data)
b1_disable_irq(port);
if (data->configuration.len > 0 && data->configuration.data) {
- if ((retval = b1_load_config(card, &data->configuration))) {
+ retval = b1_load_config(card, &data->configuration);
+ if (retval) {
b1_reset(port);
printk(KERN_ERR "%s: failed to load config!!\n",
card->name);
@@ -525,7 +528,9 @@ irqreturn_t b1_interrupt(int interrupt, void *devptr)
MsgLen = 30;
CAPIMSG_SETLEN(card->msgbuf, 30);
}
- if (!(skb = alloc_skb(DataB3Len + MsgLen, GFP_ATOMIC))) {
+
+ skb = alloc_skb(DataB3Len + MsgLen, GFP_ATOMIC);
+ if (!skb) {
printk(KERN_ERR "%s: incoming packet dropped\n",
card->name);
} else {
@@ -539,7 +544,9 @@ irqreturn_t b1_interrupt(int interrupt, void *devptr)
ApplId = (unsigned) b1_get_word(card->port);
MsgLen = b1_get_slice(card->port, card->msgbuf);
- if (!(skb = alloc_skb(MsgLen, GFP_ATOMIC))) {
+ skb = alloc_skb(MsgLen, GFP_ATOMIC);
+
+ if (!skb) {
printk(KERN_ERR "%s: incoming packet dropped\n",
card->name);
spin_unlock_irqrestore(&card->lock, flags);
@@ -663,11 +670,17 @@ int b1_proc_show(struct seq_file *m, void *v)
seq_printf(m, "%-16s %s\n", "type", s);
if (card->cardtype == avm_t1isa)
seq_printf(m, "%-16s %d\n", "cardnr", card->cardnr);
- if ((s = cinfo->version[VER_DRIVER]) != NULL)
+
+ s = cinfo->version[VER_DRIVER];
+ if (s)
seq_printf(m, "%-16s %s\n", "ver_driver", s);
- if ((s = cinfo->version[VER_CARDTYPE]) != NULL)
+
+ s = cinfo->version[VER_CARDTYPE];
+ if (s)
seq_printf(m, "%-16s %s\n", "ver_cardtype", s);
- if ((s = cinfo->version[VER_SERIAL]) != NULL)
+
+ s = cinfo->version[VER_SERIAL];
+ if (s)
seq_printf(m, "%-16s %s\n", "ver_serial", s);
if (card->cardtype != avm_m1) {
@@ -784,13 +797,15 @@ static int __init b1_init(void)
char *p;
char rev[32];
- if ((p = strchr(revision, ':')) != NULL && p[1]) {
+ p = strchr(revision, ':');
+ if (p && p[1]) {
strlcpy(rev, p + 2, 32);
- if ((p = strchr(rev, '$')) != NULL && p > rev)
+ p = strchr(rev, '$');
+ if (p && p > rev)
*(p - 1) = 0;
- } else
+ } else {
strcpy(rev, "1.0");
-
+ }
printk(KERN_INFO "b1: revision %s\n", rev);
return 0;
--
2.23.0
This ISDN stuff is going to be deleted soon. Just leave it as is.
regards,
dan carpenter
On Fri, Oct 11, 2019 at 02:00:20PM +0300, Dan Carpenter wrote:
> This ISDN stuff is going to be deleted soon. Just leave it as is.
>
> regards,
> dan carpenter
>
Noted, thanks
wambui karuga