The pixel processing unit was hard coded to only handle 8 bits per pixel
from input to output.
We now add handling for 10, 12 and 16 bits per pixel at the source and
setting the in-memory size (i.e. container size) to 16 bits for these 3
cases.
Signed-off-by: Benoit Parrot <[email protected]>
---
drivers/media/platform/ti-vpe/cal.c | 41 ++++++++++++++++++++++++++---
1 file changed, 38 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
index 51edc7bc3135..1b4a74f0d751 100644
--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -800,13 +800,48 @@ static void csi2_ctx_config(struct cal_ctx *ctx)
static void pix_proc_config(struct cal_ctx *ctx)
{
- u32 val;
+ u32 val, extract, pack;
+
+ switch (ctx->fmt->bpp) {
+ case 8:
+ extract = CAL_PIX_PROC_EXTRACT_B8;
+ pack = CAL_PIX_PROC_PACK_B8;
+ break;
+ case 10:
+ extract = CAL_PIX_PROC_EXTRACT_B10_MIPI;
+ pack = CAL_PIX_PROC_PACK_B16;
+ break;
+ case 12:
+ extract = CAL_PIX_PROC_EXTRACT_B12_MIPI;
+ pack = CAL_PIX_PROC_PACK_B16;
+ break;
+ case 16:
+ extract = CAL_PIX_PROC_EXTRACT_B16_LE;
+ pack = CAL_PIX_PROC_PACK_B16;
+ break;
+ default:
+ /*
+ * If you see this warning then it means that you added
+ * some new entry in the cal_formats[] array with a different
+ * bit per pixel values then the one supported below.
+ * Either add support for the new bpp value below or adjust
+ * the new entry to use one of the value below.
+ *
+ * Instead of failing here just use 8 bpp as a default.
+ */
+ dev_warn_once(&ctx->dev->pdev->dev,
+ "%s:%d:%s: bpp:%d unsupported! Overwritten with 8.\n",
+ __FILE__, __LINE__, __func__, ctx->fmt->bpp);
+ extract = CAL_PIX_PROC_EXTRACT_B8;
+ pack = CAL_PIX_PROC_PACK_B8;
+ break;
+ }
val = reg_read(ctx->dev, CAL_PIX_PROC(ctx->csi2_port));
- set_field(&val, CAL_PIX_PROC_EXTRACT_B8, CAL_PIX_PROC_EXTRACT_MASK);
+ set_field(&val, extract, CAL_PIX_PROC_EXTRACT_MASK);
set_field(&val, CAL_PIX_PROC_DPCMD_BYPASS, CAL_PIX_PROC_DPCMD_MASK);
set_field(&val, CAL_PIX_PROC_DPCME_BYPASS, CAL_PIX_PROC_DPCME_MASK);
- set_field(&val, CAL_PIX_PROC_PACK_B8, CAL_PIX_PROC_PACK_MASK);
+ set_field(&val, pack, CAL_PIX_PROC_PACK_MASK);
set_field(&val, ctx->csi2_port, CAL_PIX_PROC_CPORT_MASK);
set_field(&val, CAL_GEN_ENABLE, CAL_PIX_PROC_EN_MASK);
reg_write(ctx->dev, CAL_PIX_PROC(ctx->csi2_port), val);
--
2.17.1