From: Takashi Sakamoto <[email protected]>
[ Upstream commit 51e68fb0929c29e47e9074ca3e99ffd6021a1c5a ]
In some error paths, reference count of firewire unit is not decreased.
This commit fixes the bug.
Fixes: 5b14ec25a79b('ALSA: firewire: release reference count of firewire unit in .remove callback of bus driver')
Signed-off-by: Takashi Sakamoto <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/firewire/isight.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/sound/firewire/isight.c b/sound/firewire/isight.c
index 30957477e005e..0717ab9e48e3b 100644
--- a/sound/firewire/isight.c
+++ b/sound/firewire/isight.c
@@ -640,7 +640,7 @@ static int isight_probe(struct fw_unit *unit,
if (!isight->audio_base) {
dev_err(&unit->device, "audio unit base not found\n");
err = -ENXIO;
- goto err_unit;
+ goto error;
}
fw_iso_resources_init(&isight->resources, unit);
@@ -669,12 +669,12 @@ static int isight_probe(struct fw_unit *unit,
dev_set_drvdata(&unit->device, isight);
return 0;
-
-err_unit:
- fw_unit_put(isight->unit);
- mutex_destroy(&isight->mutex);
error:
snd_card_free(card);
+
+ mutex_destroy(&isight->mutex);
+ fw_unit_put(isight->unit);
+
return err;
}
--
2.20.1
From: Sergey Senozhatsky <[email protected]>
[ Upstream commit d2130e82e9454304e9b91ba9da551b5989af8c27 ]
The way we calculate logbuf free space percentage overflows signed
integer:
int free;
free = __LOG_BUF_LEN - log_next_idx;
pr_info("early log buf free: %u(%u%%)\n",
free, (free * 100) / __LOG_BUF_LEN);
We support LOG_BUF_LEN of up to 1<<25 bytes. Since setup_log_buf() is
called during early init, logbuf is mostly empty, so
__LOG_BUF_LEN - log_next_idx
is close to 1<<25. Thus when we multiply it by 100, we overflow signed
integer value range: 100 is 2^6 + 2^5 + 2^2.
Example, booting with LOG_BUF_LEN 1<<25 and log_buf_len=2G
boot param:
[ 0.075317] log_buf_len: -2147483648 bytes
[ 0.075319] early log buf free: 33549896(-28%)
Make "free" unsigned integer and use appropriate printk() specifier.
Link: http://lkml.kernel.org/r/[email protected]
To: Steven Rostedt <[email protected]>
Cc: [email protected]
Cc: Sergey Senozhatsky <[email protected]>
Signed-off-by: Sergey Senozhatsky <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/printk/printk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 9ee6016a19fc8..5bafd633b4027 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -1098,7 +1098,7 @@ void __init setup_log_buf(int early)
{
unsigned long flags;
char *new_log_buf;
- int free;
+ unsigned int free;
if (log_buf != __log_buf)
return;
--
2.20.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 014704e6f54189a203cc14c7c0bb411b940241bc ]
The "count < sizeof(struct os_area_db)" comparison is type promoted to
size_t so negative values of "count" are treated as very high values
and we accidentally return success instead of a negative error code.
This doesn't really change runtime much but it fixes a static checker
warning.
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Geoff Levand <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/ps3/os-area.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c
index cdbfc5cfd6f38..f5387ad822798 100644
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -664,7 +664,7 @@ static int update_flash_db(void)
db_set_64(db, &os_area_db_id_rtc_diff, saved_params.rtc_diff);
count = os_area_flash_write(db, sizeof(struct os_area_db), pos);
- if (count < sizeof(struct os_area_db)) {
+ if (count < 0 || count < sizeof(struct os_area_db)) {
pr_debug("%s: os_area_flash_write failed %zd\n", __func__,
count);
error = count < 0 ? count : -EIO;
--
2.20.1
From: Joel Stanley <[email protected]>
[ Upstream commit 1a855eaccf353f7ed1d51a3d4b3af727ccbd81ca ]
As of commit 10c77dba40ff ("powerpc/boot: Fix build failure in 32-bit
boot wrapper") the opal code is hidden behind CONFIG_PPC64_BOOT_WRAPPER,
but the boot wrapper avoids include/linux, so it does not get the normal
Kconfig flags.
We can drop the guard entirely as in commit f8e8e69cea49 ("powerpc/boot:
Only build OPAL code when necessary") the makefile only includes opal.c
in the build if CONFIG_PPC64_BOOT_WRAPPER is set.
Fixes: 10c77dba40ff ("powerpc/boot: Fix build failure in 32-bit boot wrapper")
Signed-off-by: Joel Stanley <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/boot/opal.c | 8 --------
1 file changed, 8 deletions(-)
diff --git a/arch/powerpc/boot/opal.c b/arch/powerpc/boot/opal.c
index 0272570d02de1..dfb199ef5b949 100644
--- a/arch/powerpc/boot/opal.c
+++ b/arch/powerpc/boot/opal.c
@@ -13,8 +13,6 @@
#include <libfdt.h>
#include "../include/asm/opal-api.h"
-#ifdef CONFIG_PPC64_BOOT_WRAPPER
-
/* Global OPAL struct used by opal-call.S */
struct opal {
u64 base;
@@ -101,9 +99,3 @@ int opal_console_init(void *devp, struct serial_console_data *scdp)
return 0;
}
-#else
-int opal_console_init(void *devp, struct serial_console_data *scdp)
-{
- return -1;
-}
-#endif /* __powerpc64__ */
--
2.20.1
From: Sam Bobroff <[email protected]>
[ Upstream commit bcbe3730531239abd45ab6c6af4a18078b37dd47 ]
If a device is removed during EEH processing (either by a driver's
handler or as part of recovery), it can lead to a null dereference
in eeh_pe_report_edev().
To handle this, skip devices that have been removed.
Signed-off-by: Sam Bobroff <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/eeh_driver.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 110eba400de7c..af1f3d5f9a0f7 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -281,6 +281,10 @@ static void eeh_pe_report_edev(struct eeh_dev *edev, eeh_report_fn fn,
struct pci_driver *driver;
enum pci_ers_result new_result;
+ if (!edev->pdev) {
+ eeh_edev_info(edev, "no device");
+ return;
+ }
device_lock(&edev->pdev->dev);
if (eeh_edev_actionable(edev)) {
driver = eeh_pcid_get(edev->pdev);
--
2.20.1
From: Sam Bobroff <[email protected]>
[ Upstream commit 473af09b56dc4be68e4af33220ceca6be67aa60d ]
eeh_add_to_parent_pe() sometimes removes the EEH_PE_KEEP flag, but it
incorrectly removes it from pe->type, instead of pe->state.
However, rather than clearing it from the correct field, remove it.
Inspection of the code shows that it can't ever have had any effect
(even if it had been cleared from the correct field), because the
field is never tested after it is cleared by the statement in
question.
The clear statement was added by commit 807a827d4e74 ("powerpc/eeh:
Keep PE during hotplug"), but it didn't explain why it was necessary.
Signed-off-by: Sam Bobroff <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/eeh_pe.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index 1b238ecc553e2..210d239a93950 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -379,7 +379,7 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
while (parent) {
if (!(parent->type & EEH_PE_INVALID))
break;
- parent->type &= ~(EEH_PE_INVALID | EEH_PE_KEEP);
+ parent->type &= ~EEH_PE_INVALID;
parent = parent->parent;
}
--
2.20.1
From: Dan Carpenter <[email protected]>
[ Upstream commit d8c27ba86a2fd806d3957e5a9b30e66dfca2a61d ]
Fix memory leak in L2c threaded interrupt handler.
[ bp: Rewrite commit message. ]
Fixes: 41003396f932 ("EDAC, thunderx: Add Cavium ThunderX EDAC driver")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
CC: David Daney <[email protected]>
CC: Jan Glauber <[email protected]>
CC: Mauro Carvalho Chehab <[email protected]>
CC: Sergey Temerkhanov <[email protected]>
CC: linux-edac <[email protected]>
Link: http://lkml.kernel.org/r/20181013102843.GG16086@mwanda
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/edac/thunderx_edac.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/edac/thunderx_edac.c b/drivers/edac/thunderx_edac.c
index c009d94f40c52..34be60fe68922 100644
--- a/drivers/edac/thunderx_edac.c
+++ b/drivers/edac/thunderx_edac.c
@@ -1884,7 +1884,7 @@ static irqreturn_t thunderx_l2c_threaded_isr(int irq, void *irq_id)
default:
dev_err(&l2c->pdev->dev, "Unsupported device: %04x\n",
l2c->pdev->device);
- return IRQ_NONE;
+ goto err_free;
}
while (CIRC_CNT(l2c->ring_head, l2c->ring_tail,
@@ -1906,7 +1906,7 @@ static irqreturn_t thunderx_l2c_threaded_isr(int irq, void *irq_id)
l2c->ring_tail++;
}
- return IRQ_HANDLED;
+ ret = IRQ_HANDLED;
err_free:
kfree(other);
--
2.20.1
From: Jens Axboe <[email protected]>
[ Upstream commit 6d1f9dfde7343c4ebfb8f84dcb333af571bb3b22 ]
We need to be using the mq variant of request requeue here.
Fixes: ca33dd92968b ("skd: Convert to blk-mq")
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/skd_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/block/skd_main.c b/drivers/block/skd_main.c
index 87b9e7fbf0621..27323fa23997d 100644
--- a/drivers/block/skd_main.c
+++ b/drivers/block/skd_main.c
@@ -1416,7 +1416,7 @@ static void skd_resolve_req_exception(struct skd_device *skdev,
case SKD_CHECK_STATUS_BUSY_IMMINENT:
skd_log_skreq(skdev, skreq, "retry(busy)");
- blk_requeue_request(skdev->queue, req);
+ blk_mq_requeue_request(req, true);
dev_info(&skdev->pdev->dev, "drive BUSY imminent\n");
skdev->state = SKD_DRVR_STATE_BUSY_IMMINENT;
skdev->timer_countdown = SKD_TIMER_MINUTES(20);
@@ -1426,7 +1426,7 @@ static void skd_resolve_req_exception(struct skd_device *skdev,
case SKD_CHECK_STATUS_REQUEUE_REQUEST:
if ((unsigned long) ++req->special < SKD_MAX_RETRIES) {
skd_log_skreq(skdev, skreq, "retry");
- blk_requeue_request(skdev->queue, req);
+ blk_mq_requeue_request(req, true);
break;
}
/* fall through */
--
2.20.1
From: Chaotian Jing <[email protected]>
[ Upstream commit f38a9774ddde9d79b3487dd888edd8b8623552af ]
when msdc_cmd_is_ready return fail, the req_timeout work has not been
inited and cancel_delayed_work() will return false, then, the request
return directly and never call mmc_request_done().
so need call mod_delayed_work() before msdc_cmd_is_ready()
Signed-off-by: Chaotian Jing <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/mtk-sd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 621c914dc5c01..673f6a9616cd9 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1056,6 +1056,7 @@ static void msdc_start_command(struct msdc_host *host,
WARN_ON(host->cmd);
host->cmd = cmd;
+ mod_delayed_work(system_wq, &host->req_timeout, DAT_TIMEOUT);
if (!msdc_cmd_is_ready(host, mrq, cmd))
return;
@@ -1067,7 +1068,6 @@ static void msdc_start_command(struct msdc_host *host,
cmd->error = 0;
rawcmd = msdc_cmd_prepare_raw_cmd(host, mrq, cmd);
- mod_delayed_work(system_wq, &host->req_timeout, DAT_TIMEOUT);
sdr_set_bits(host->base + MSDC_INTEN, cmd_ints_mask);
writel(cmd->arg, host->base + SDC_ARG);
--
2.20.1
From: Liu Bo <[email protected]>
[ Upstream commit de2c6615dcddf2af868c5cbd1db2e9e73b4beb58 ]
This fixes btrfs_get_extent to be consistent with our existing
declaration style.
Note: For the record, indentation styles that are accepted are both,
aligning under the opening ( and tab or double tab indentation on the
next line. Preferrably not spliting the type or long expressions in the
argument lists.
Signed-off-by: Liu Bo <[email protected]>
[ add note ]
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/ctree.h | 4 ++--
fs/btrfs/inode.c | 6 +++---
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index cc2d268e2cd7a..3a5a09e8e20e2 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -3183,8 +3183,8 @@ struct inode *btrfs_iget_path(struct super_block *s, struct btrfs_key *location,
struct inode *btrfs_iget(struct super_block *s, struct btrfs_key *location,
struct btrfs_root *root, int *was_new);
struct extent_map *btrfs_get_extent(struct btrfs_inode *inode,
- struct page *page, size_t pg_offset,
- u64 start, u64 end, int create);
+ struct page *page, size_t pg_offset,
+ u64 start, u64 end, int create);
int btrfs_update_inode(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct inode *inode);
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index f0f7bc5d2e4a0..62a7c6a88c3e8 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -6862,9 +6862,9 @@ static noinline int uncompress_inline(struct btrfs_path *path,
* This also copies inline extents directly into the page.
*/
struct extent_map *btrfs_get_extent(struct btrfs_inode *inode,
- struct page *page,
- size_t pg_offset, u64 start, u64 len,
- int create)
+ struct page *page,
+ size_t pg_offset, u64 start, u64 len,
+ int create)
{
struct btrfs_fs_info *fs_info = inode->root->fs_info;
int ret;
--
2.20.1
From: Wenwen Wang <[email protected]>
[ Upstream commit 6b995f4eec34745f6cb20d66d5277611f0b3c3fa ]
In _scif_prog_signal(), the boolean variable 'x100' is used to indicate
whether the MIC Coprocessor is X100. If 'x100' is true, the status
descriptor will be used to write the value to the destination. Otherwise, a
DMA pool will be allocated for this purpose. Specifically, if the DMA pool
is allocated successfully, two memory addresses will be returned. One is
for the CPU and the other is for the device to access the DMA pool. The
former is stored to the variable 'status' and the latter is stored to the
variable 'src'. After the allocation, the address in 'src' is saved to
'status->src_dma_addr', which is actually in the DMA pool, and 'src' is
then modified.
Later on, if an error occurs, the execution flow will transfer to the label
'dma_fail', which will check 'x100' and free up the allocated DMA pool if
'x100' is false. The point here is that 'status->src_dma_addr' is used for
freeing up the DMA pool. As mentioned before, 'status->src_dma_addr' is in
the DMA pool. And thus, the device is able to modify this data. This can
potentially cause failures when freeing up the DMA pool because of the
modified device address.
This patch avoids the above issue by using the variable 'src' (with
necessary calculation) to free up the DMA pool.
Signed-off-by: Wenwen Wang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/mic/scif/scif_fence.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/misc/mic/scif/scif_fence.c b/drivers/misc/mic/scif/scif_fence.c
index cac3bcc308a7e..7bb929f05d852 100644
--- a/drivers/misc/mic/scif/scif_fence.c
+++ b/drivers/misc/mic/scif/scif_fence.c
@@ -272,7 +272,7 @@ static int _scif_prog_signal(scif_epd_t epd, dma_addr_t dst, u64 val)
dma_fail:
if (!x100)
dma_pool_free(ep->remote_dev->signal_pool, status,
- status->src_dma_addr);
+ src - offsetof(struct scif_status, val));
alloc_fail:
return err;
}
--
2.20.1
From: Selvin Xavier <[email protected]>
[ Upstream commit 5df950994934814a8b91f0cf9f653842d2ba082d ]
In case the NQ alloc/enable fails, free up the already allocated/enabled
NQ before reporting failure. Also, track the alloc/enable using proper
state checking.
Signed-off-by: Selvin Xavier <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/bnxt_re/bnxt_re.h | 2 ++
drivers/infiniband/hw/bnxt_re/main.c | 31 ++++++++++++++++++-------
2 files changed, 24 insertions(+), 9 deletions(-)
diff --git a/drivers/infiniband/hw/bnxt_re/bnxt_re.h b/drivers/infiniband/hw/bnxt_re/bnxt_re.h
index 96f76896488da..802942adea8e8 100644
--- a/drivers/infiniband/hw/bnxt_re/bnxt_re.h
+++ b/drivers/infiniband/hw/bnxt_re/bnxt_re.h
@@ -120,6 +120,8 @@ struct bnxt_re_dev {
#define BNXT_RE_FLAG_HAVE_L2_REF 3
#define BNXT_RE_FLAG_RCFW_CHANNEL_EN 4
#define BNXT_RE_FLAG_QOS_WORK_REG 5
+#define BNXT_RE_FLAG_RESOURCES_ALLOCATED 7
+#define BNXT_RE_FLAG_RESOURCES_INITIALIZED 8
#define BNXT_RE_FLAG_ISSUE_ROCE_STATS 29
struct net_device *netdev;
unsigned int version, major, minor;
diff --git a/drivers/infiniband/hw/bnxt_re/main.c b/drivers/infiniband/hw/bnxt_re/main.c
index 7ffad368c5fa1..589b0d4677d52 100644
--- a/drivers/infiniband/hw/bnxt_re/main.c
+++ b/drivers/infiniband/hw/bnxt_re/main.c
@@ -864,10 +864,8 @@ static void bnxt_re_cleanup_res(struct bnxt_re_dev *rdev)
{
int i;
- if (rdev->nq[0].hwq.max_elements) {
- for (i = 1; i < rdev->num_msix; i++)
- bnxt_qplib_disable_nq(&rdev->nq[i - 1]);
- }
+ for (i = 1; i < rdev->num_msix; i++)
+ bnxt_qplib_disable_nq(&rdev->nq[i - 1]);
if (rdev->qplib_res.rcfw)
bnxt_qplib_cleanup_res(&rdev->qplib_res);
@@ -876,6 +874,7 @@ static void bnxt_re_cleanup_res(struct bnxt_re_dev *rdev)
static int bnxt_re_init_res(struct bnxt_re_dev *rdev)
{
int rc = 0, i;
+ int num_vec_enabled = 0;
bnxt_qplib_init_res(&rdev->qplib_res);
@@ -891,9 +890,13 @@ static int bnxt_re_init_res(struct bnxt_re_dev *rdev)
"Failed to enable NQ with rc = 0x%x", rc);
goto fail;
}
+ num_vec_enabled++;
}
return 0;
fail:
+ for (i = num_vec_enabled; i >= 0; i--)
+ bnxt_qplib_disable_nq(&rdev->nq[i]);
+
return rc;
}
@@ -925,6 +928,7 @@ static void bnxt_re_free_res(struct bnxt_re_dev *rdev)
static int bnxt_re_alloc_res(struct bnxt_re_dev *rdev)
{
int rc = 0, i;
+ int num_vec_created = 0;
/* Configure and allocate resources for qplib */
rdev->qplib_res.rcfw = &rdev->rcfw;
@@ -951,7 +955,7 @@ static int bnxt_re_alloc_res(struct bnxt_re_dev *rdev)
if (rc) {
dev_err(rdev_to_dev(rdev), "Alloc Failed NQ%d rc:%#x",
i, rc);
- goto dealloc_dpi;
+ goto free_nq;
}
rc = bnxt_re_net_ring_alloc
(rdev, rdev->nq[i].hwq.pbl[PBL_LVL_0].pg_map_arr,
@@ -964,14 +968,17 @@ static int bnxt_re_alloc_res(struct bnxt_re_dev *rdev)
dev_err(rdev_to_dev(rdev),
"Failed to allocate NQ fw id with rc = 0x%x",
rc);
+ bnxt_qplib_free_nq(&rdev->nq[i]);
goto free_nq;
}
+ num_vec_created++;
}
return 0;
free_nq:
- for (i = 0; i < rdev->num_msix - 1; i++)
+ for (i = num_vec_created; i >= 0; i--) {
+ bnxt_re_net_ring_free(rdev, rdev->nq[i].ring_id);
bnxt_qplib_free_nq(&rdev->nq[i]);
-dealloc_dpi:
+ }
bnxt_qplib_dealloc_dpi(&rdev->qplib_res,
&rdev->qplib_res.dpi_tbl,
&rdev->dpi_privileged);
@@ -1206,8 +1213,11 @@ static void bnxt_re_ib_unreg(struct bnxt_re_dev *rdev)
if (test_and_clear_bit(BNXT_RE_FLAG_QOS_WORK_REG, &rdev->flags))
cancel_delayed_work(&rdev->worker);
- bnxt_re_cleanup_res(rdev);
- bnxt_re_free_res(rdev);
+ if (test_and_clear_bit(BNXT_RE_FLAG_RESOURCES_INITIALIZED,
+ &rdev->flags))
+ bnxt_re_cleanup_res(rdev);
+ if (test_and_clear_bit(BNXT_RE_FLAG_RESOURCES_ALLOCATED, &rdev->flags))
+ bnxt_re_free_res(rdev);
if (test_and_clear_bit(BNXT_RE_FLAG_RCFW_CHANNEL_EN, &rdev->flags)) {
rc = bnxt_qplib_deinit_rcfw(&rdev->rcfw);
@@ -1337,12 +1347,15 @@ static int bnxt_re_ib_reg(struct bnxt_re_dev *rdev)
pr_err("Failed to allocate resources: %#x\n", rc);
goto fail;
}
+ set_bit(BNXT_RE_FLAG_RESOURCES_ALLOCATED, &rdev->flags);
rc = bnxt_re_init_res(rdev);
if (rc) {
pr_err("Failed to initialize resources: %#x\n", rc);
goto fail;
}
+ set_bit(BNXT_RE_FLAG_RESOURCES_INITIALIZED, &rdev->flags);
+
if (!rdev->is_virtfn) {
rc = bnxt_re_setup_qos(rdev);
if (rc)
--
2.20.1
From: Omar Sandoval <[email protected]>
[ Upstream commit 53d0f8dbde89cf6c862c7a62e00c6123e02cba41 ]
The error handling in fd_probe_drives() doesn't clean up at all. Fix it
up in preparation for converting to blk-mq. While we're here, get rid of
the commented out amiga_floppy_remove().
Signed-off-by: Omar Sandoval <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/amiflop.c | 84 ++++++++++++++++++++---------------------
1 file changed, 40 insertions(+), 44 deletions(-)
diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index 3aaf6af3ec23d..2158e130744e0 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -1701,11 +1701,41 @@ static const struct block_device_operations floppy_fops = {
.check_events = amiga_check_events,
};
+static struct gendisk *fd_alloc_disk(int drive)
+{
+ struct gendisk *disk;
+
+ disk = alloc_disk(1);
+ if (!disk)
+ goto out;
+
+ disk->queue = blk_init_queue(do_fd_request, &amiflop_lock);
+ if (IS_ERR(disk->queue)) {
+ disk->queue = NULL;
+ goto out_put_disk;
+ }
+
+ unit[drive].trackbuf = kmalloc(FLOPPY_MAX_SECTORS * 512, GFP_KERNEL);
+ if (!unit[drive].trackbuf)
+ goto out_cleanup_queue;
+
+ return disk;
+
+out_cleanup_queue:
+ blk_cleanup_queue(disk->queue);
+ disk->queue = NULL;
+out_put_disk:
+ put_disk(disk);
+out:
+ unit[drive].type->code = FD_NODRIVE;
+ return NULL;
+}
+
static int __init fd_probe_drives(void)
{
int drive,drives,nomem;
- printk(KERN_INFO "FD: probing units\nfound ");
+ pr_info("FD: probing units\nfound");
drives=0;
nomem=0;
for(drive=0;drive<FD_MAX_UNITS;drive++) {
@@ -1713,27 +1743,17 @@ static int __init fd_probe_drives(void)
fd_probe(drive);
if (unit[drive].type->code == FD_NODRIVE)
continue;
- disk = alloc_disk(1);
+
+ disk = fd_alloc_disk(drive);
if (!disk) {
- unit[drive].type->code = FD_NODRIVE;
+ pr_cont(" no mem for fd%d", drive);
+ nomem = 1;
continue;
}
unit[drive].gendisk = disk;
-
- disk->queue = blk_init_queue(do_fd_request, &amiflop_lock);
- if (!disk->queue) {
- unit[drive].type->code = FD_NODRIVE;
- continue;
- }
-
drives++;
- if ((unit[drive].trackbuf = kmalloc(FLOPPY_MAX_SECTORS * 512, GFP_KERNEL)) == NULL) {
- printk("no mem for ");
- unit[drive].type = &drive_types[num_dr_types - 1]; /* FD_NODRIVE */
- drives--;
- nomem = 1;
- }
- printk("fd%d ",drive);
+
+ pr_cont(" fd%d",drive);
disk->major = FLOPPY_MAJOR;
disk->first_minor = drive;
disk->fops = &floppy_fops;
@@ -1744,11 +1764,11 @@ static int __init fd_probe_drives(void)
}
if ((drives > 0) || (nomem == 0)) {
if (drives == 0)
- printk("no drives");
- printk("\n");
+ pr_cont(" no drives");
+ pr_cont("\n");
return drives;
}
- printk("\n");
+ pr_cont("\n");
return -ENOMEM;
}
@@ -1831,30 +1851,6 @@ static int __init amiga_floppy_probe(struct platform_device *pdev)
return ret;
}
-#if 0 /* not safe to unload */
-static int __exit amiga_floppy_remove(struct platform_device *pdev)
-{
- int i;
-
- for( i = 0; i < FD_MAX_UNITS; i++) {
- if (unit[i].type->code != FD_NODRIVE) {
- struct request_queue *q = unit[i].gendisk->queue;
- del_gendisk(unit[i].gendisk);
- put_disk(unit[i].gendisk);
- kfree(unit[i].trackbuf);
- if (q)
- blk_cleanup_queue(q);
- }
- }
- blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256);
- free_irq(IRQ_AMIGA_CIAA_TB, NULL);
- free_irq(IRQ_AMIGA_DSKBLK, NULL);
- custom.dmacon = DMAF_DISK; /* disable DMA */
- amiga_chip_free(raw_buf);
- unregister_blkdev(FLOPPY_MAJOR, "fd");
-}
-#endif
-
static struct platform_driver amiga_floppy_driver = {
.driver = {
.name = "amiga-floppy",
--
2.20.1
From: Keith Busch <[email protected]>
[ Upstream commit cb4bfda62afa25b4eee3d635d33fccdd9485dd7c ]
A removal waits for the reset_work to complete. If a surprise removal
occurs around the same time as an error triggered controller reset, and
reset work happened to dispatch a command to the removed controller, the
command won't be recovered since the timeout work doesn't do anything
during error recovery. We wouldn't want to wait for timeout handling
anyway, so this patch fixes this by disabling the controller and killing
admin queues prior to syncing with the reset_work.
Signed-off-by: Keith Busch <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/pci.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index a64a8bca0d5b9..9479c0db08f62 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -2583,13 +2583,12 @@ static void nvme_remove(struct pci_dev *pdev)
struct nvme_dev *dev = pci_get_drvdata(pdev);
nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_DELETING);
-
- cancel_work_sync(&dev->ctrl.reset_work);
pci_set_drvdata(pdev, NULL);
if (!pci_device_is_present(pdev)) {
nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_DEAD);
nvme_dev_disable(dev, true);
+ nvme_dev_remove_admin(dev);
}
flush_work(&dev->ctrl.reset_work);
--
2.20.1
From: Honghui Zhang <[email protected]>
[ Upstream commit 3828d60fd2ef99f97a677c1f95af2ab3e65e2576 ]
Commit 43e6409db64d ("PCI: mediatek: Add MSI support for MT2712 and
MT7622") added MSI support but enabled MSI in the wrong place, at a step
in the probe sequence where clocks were not still enabled.
Fix this issue by calling mtk_pcie_enable_msi() in mtk_pcie_startup_port_v2()
since clocks are enabled when mtk_pcie_startup_port_v2() is called.
To avoid forward declaration of mtk_pcie_enable_msi(), move the
mtk_pcie_startup_port_v2() function definition in the file.
Fixes: 43e6409db64d ("PCI: mediatek: Add MSI support for MT2712 and MT7622")
Signed-off-by: Honghui Zhang <[email protected]>
[[email protected]: squashed commit and adapted log]
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Acked-by: Ryder Lee <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/pcie-mediatek.c | 143 +++++++++++++------------
1 file changed, 72 insertions(+), 71 deletions(-)
diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
index abedf8ec11bba..dd49033e488d8 100644
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -394,75 +394,6 @@ static struct pci_ops mtk_pcie_ops_v2 = {
.write = mtk_pcie_config_write,
};
-static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
-{
- struct mtk_pcie *pcie = port->pcie;
- struct resource *mem = &pcie->mem;
- const struct mtk_pcie_soc *soc = port->pcie->soc;
- u32 val;
- size_t size;
- int err;
-
- /* MT7622 platforms need to enable LTSSM and ASPM from PCIe subsys */
- if (pcie->base) {
- val = readl(pcie->base + PCIE_SYS_CFG_V2);
- val |= PCIE_CSR_LTSSM_EN(port->slot) |
- PCIE_CSR_ASPM_L1_EN(port->slot);
- writel(val, pcie->base + PCIE_SYS_CFG_V2);
- }
-
- /* Assert all reset signals */
- writel(0, port->base + PCIE_RST_CTRL);
-
- /*
- * Enable PCIe link down reset, if link status changed from link up to
- * link down, this will reset MAC control registers and configuration
- * space.
- */
- writel(PCIE_LINKDOWN_RST_EN, port->base + PCIE_RST_CTRL);
-
- /* De-assert PHY, PE, PIPE, MAC and configuration reset */
- val = readl(port->base + PCIE_RST_CTRL);
- val |= PCIE_PHY_RSTB | PCIE_PERSTB | PCIE_PIPE_SRSTB |
- PCIE_MAC_SRSTB | PCIE_CRSTB;
- writel(val, port->base + PCIE_RST_CTRL);
-
- /* Set up vendor ID and class code */
- if (soc->need_fix_class_id) {
- val = PCI_VENDOR_ID_MEDIATEK;
- writew(val, port->base + PCIE_CONF_VEND_ID);
-
- val = PCI_CLASS_BRIDGE_PCI;
- writew(val, port->base + PCIE_CONF_CLASS_ID);
- }
-
- /* 100ms timeout value should be enough for Gen1/2 training */
- err = readl_poll_timeout(port->base + PCIE_LINK_STATUS_V2, val,
- !!(val & PCIE_PORT_LINKUP_V2), 20,
- 100 * USEC_PER_MSEC);
- if (err)
- return -ETIMEDOUT;
-
- /* Set INTx mask */
- val = readl(port->base + PCIE_INT_MASK);
- val &= ~INTX_MASK;
- writel(val, port->base + PCIE_INT_MASK);
-
- /* Set AHB to PCIe translation windows */
- size = mem->end - mem->start;
- val = lower_32_bits(mem->start) | AHB2PCIE_SIZE(fls(size));
- writel(val, port->base + PCIE_AHB_TRANS_BASE0_L);
-
- val = upper_32_bits(mem->start);
- writel(val, port->base + PCIE_AHB_TRANS_BASE0_H);
-
- /* Set PCIe to AXI translation memory space.*/
- val = fls(0xffffffff) | WIN_ENABLE;
- writel(val, port->base + PCIE_AXI_WINDOW0);
-
- return 0;
-}
-
static void mtk_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
{
struct mtk_pcie_port *port = irq_data_get_irq_chip_data(data);
@@ -639,8 +570,6 @@ static int mtk_pcie_init_irq_domain(struct mtk_pcie_port *port,
ret = mtk_pcie_allocate_msi_domains(port);
if (ret)
return ret;
-
- mtk_pcie_enable_msi(port);
}
return 0;
@@ -707,6 +636,78 @@ static int mtk_pcie_setup_irq(struct mtk_pcie_port *port,
return 0;
}
+static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
+{
+ struct mtk_pcie *pcie = port->pcie;
+ struct resource *mem = &pcie->mem;
+ const struct mtk_pcie_soc *soc = port->pcie->soc;
+ u32 val;
+ size_t size;
+ int err;
+
+ /* MT7622 platforms need to enable LTSSM and ASPM from PCIe subsys */
+ if (pcie->base) {
+ val = readl(pcie->base + PCIE_SYS_CFG_V2);
+ val |= PCIE_CSR_LTSSM_EN(port->slot) |
+ PCIE_CSR_ASPM_L1_EN(port->slot);
+ writel(val, pcie->base + PCIE_SYS_CFG_V2);
+ }
+
+ /* Assert all reset signals */
+ writel(0, port->base + PCIE_RST_CTRL);
+
+ /*
+ * Enable PCIe link down reset, if link status changed from link up to
+ * link down, this will reset MAC control registers and configuration
+ * space.
+ */
+ writel(PCIE_LINKDOWN_RST_EN, port->base + PCIE_RST_CTRL);
+
+ /* De-assert PHY, PE, PIPE, MAC and configuration reset */
+ val = readl(port->base + PCIE_RST_CTRL);
+ val |= PCIE_PHY_RSTB | PCIE_PERSTB | PCIE_PIPE_SRSTB |
+ PCIE_MAC_SRSTB | PCIE_CRSTB;
+ writel(val, port->base + PCIE_RST_CTRL);
+
+ /* Set up vendor ID and class code */
+ if (soc->need_fix_class_id) {
+ val = PCI_VENDOR_ID_MEDIATEK;
+ writew(val, port->base + PCIE_CONF_VEND_ID);
+
+ val = PCI_CLASS_BRIDGE_PCI;
+ writew(val, port->base + PCIE_CONF_CLASS_ID);
+ }
+
+ /* 100ms timeout value should be enough for Gen1/2 training */
+ err = readl_poll_timeout(port->base + PCIE_LINK_STATUS_V2, val,
+ !!(val & PCIE_PORT_LINKUP_V2), 20,
+ 100 * USEC_PER_MSEC);
+ if (err)
+ return -ETIMEDOUT;
+
+ /* Set INTx mask */
+ val = readl(port->base + PCIE_INT_MASK);
+ val &= ~INTX_MASK;
+ writel(val, port->base + PCIE_INT_MASK);
+
+ if (IS_ENABLED(CONFIG_PCI_MSI))
+ mtk_pcie_enable_msi(port);
+
+ /* Set AHB to PCIe translation windows */
+ size = mem->end - mem->start;
+ val = lower_32_bits(mem->start) | AHB2PCIE_SIZE(fls(size));
+ writel(val, port->base + PCIE_AHB_TRANS_BASE0_L);
+
+ val = upper_32_bits(mem->start);
+ writel(val, port->base + PCIE_AHB_TRANS_BASE0_H);
+
+ /* Set PCIe to AXI translation memory space.*/
+ val = fls(0xffffffff) | WIN_ENABLE;
+ writel(val, port->base + PCIE_AXI_WINDOW0);
+
+ return 0;
+}
+
static void __iomem *mtk_pcie_map_bus(struct pci_bus *bus,
unsigned int devfn, int where)
{
--
2.20.1
From: Lubomir Rintel <[email protected]>
[ Upstream commit 4917fb90eec7c26dac1497ada3bd4a325f670fcc ]
A typo that makes it impossible to get the correct clocks for
MMP2_CLK_SDH2 and MMP2_CLK_SDH3.
Signed-off-by: Lubomir Rintel <[email protected]>
Fixes: 1ec770d92a62 ("clk: mmp: add mmp2 DT support for clock driver")
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/mmp/clk-of-mmp2.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index 0fc75c3959570..d083b860f0833 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -227,8 +227,8 @@ static struct mmp_param_gate_clk apmu_gate_clks[] = {
/* The gate clocks has mux parent. */
{MMP2_CLK_SDH0, "sdh0_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH0, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
{MMP2_CLK_SDH1, "sdh1_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH1, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
- {MMP2_CLK_SDH1, "sdh2_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH2, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
- {MMP2_CLK_SDH1, "sdh3_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH3, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+ {MMP2_CLK_SDH2, "sdh2_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH2, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+ {MMP2_CLK_SDH3, "sdh3_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH3, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
{MMP2_CLK_DISP0, "disp0_clk", "disp0_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1b, 0x1b, 0x0, 0, &disp0_lock},
{MMP2_CLK_DISP0_SPHY, "disp0_sphy_clk", "disp0_sphy_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1024, 0x1024, 0x0, 0, &disp0_lock},
{MMP2_CLK_DISP1, "disp1_clk", "disp1_div", CLK_SET_RATE_PARENT, APMU_DISP1, 0x1b, 0x1b, 0x0, 0, &disp1_lock},
--
2.20.1
From: Dave Chinner <[email protected]>
[ Upstream commit 37fd1678245f7a5898c1b05128bc481fb403c290 ]
When looking at a 4.18 based KASAN use after free report, I noticed
that racing xfs_buf_rele() may race on dropping the last reference
to the buffer and taking the buffer lock. This was the symptom
displayed by the KASAN report, but the actual issue that was
reported had already been fixed in 4.19-rc1 by commit e339dd8d8b04
("xfs: use sync buffer I/O for sync delwri queue submission").
Despite this, I think there is still an issue with xfs_buf_rele()
in this code:
release = atomic_dec_and_lock(&bp->b_hold, &pag->pag_buf_lock);
spin_lock(&bp->b_lock);
if (!release) {
.....
If two threads race on the b_lock after both dropping a reference
and one getting dropping the last reference so release = true, we
end up with:
CPU 0 CPU 1
atomic_dec_and_lock()
atomic_dec_and_lock()
spin_lock(&bp->b_lock)
spin_lock(&bp->b_lock)
<spins>
<release = true bp->b_lru_ref = 0>
<remove from lists>
freebuf = true
spin_unlock(&bp->b_lock)
xfs_buf_free(bp)
<gets lock, reading and writing freed memory>
<accesses freed memory>
spin_unlock(&bp->b_lock) <reads/writes freed memory>
IOWs, we can't safely take bp->b_lock after dropping the hold
reference because the buffer may go away at any time after we
drop that reference. However, this can be fixed simply by taking the
bp->b_lock before we drop the reference.
It is safe to nest the pag_buf_lock inside bp->b_lock as the
pag_buf_lock is only used to serialise against lookup in
xfs_buf_find() and no other locks are held over or under the
pag_buf_lock there. Make this clear by documenting the buffer lock
orders at the top of the file.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Carlos Maiolino <[email protected]
Signed-off-by: Dave Chinner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/xfs/xfs_buf.c | 38 +++++++++++++++++++++++++++++++++++++-
1 file changed, 37 insertions(+), 1 deletion(-)
diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c
index e839907e8492f..f4a89c94c931b 100644
--- a/fs/xfs/xfs_buf.c
+++ b/fs/xfs/xfs_buf.c
@@ -37,6 +37,32 @@ static kmem_zone_t *xfs_buf_zone;
#define xb_to_gfp(flags) \
((((flags) & XBF_READ_AHEAD) ? __GFP_NORETRY : GFP_NOFS) | __GFP_NOWARN)
+/*
+ * Locking orders
+ *
+ * xfs_buf_ioacct_inc:
+ * xfs_buf_ioacct_dec:
+ * b_sema (caller holds)
+ * b_lock
+ *
+ * xfs_buf_stale:
+ * b_sema (caller holds)
+ * b_lock
+ * lru_lock
+ *
+ * xfs_buf_rele:
+ * b_lock
+ * pag_buf_lock
+ * lru_lock
+ *
+ * xfs_buftarg_wait_rele
+ * lru_lock
+ * b_lock (trylock due to inversion)
+ *
+ * xfs_buftarg_isolate
+ * lru_lock
+ * b_lock (trylock due to inversion)
+ */
static inline int
xfs_buf_is_vmapped(
@@ -1006,8 +1032,18 @@ xfs_buf_rele(
ASSERT(atomic_read(&bp->b_hold) > 0);
- release = atomic_dec_and_lock(&bp->b_hold, &pag->pag_buf_lock);
+ /*
+ * We grab the b_lock here first to serialise racing xfs_buf_rele()
+ * calls. The pag_buf_lock being taken on the last reference only
+ * serialises against racing lookups in xfs_buf_find(). IOWs, the second
+ * to last reference we drop here is not serialised against the last
+ * reference until we take bp->b_lock. Hence if we don't grab b_lock
+ * first, the last "release" reference can win the race to the lock and
+ * free the buffer before the second-to-last reference is processed,
+ * leading to a use-after-free scenario.
+ */
spin_lock(&bp->b_lock);
+ release = atomic_dec_and_lock(&bp->b_hold, &pag->pag_buf_lock);
if (!release) {
/*
* Drop the in-flight state if the buffer is already on the LRU
--
2.20.1
From: Brian Foster <[email protected]>
[ Upstream commit efc3289cf8d39c34502a7cc9695ca2fa125aad0c ]
In the typical unmount case, the AIL is forced out by the unmount
sequence before the xfsaild task is stopped. Since AIL items are
removed on writeback completion, this means that the AIL
->ail_buf_list delwri queue has been drained. This is not always
true in the shutdown case, however.
It's possible for buffers to sit on a delwri queue for a period of
time across submission attempts if said items are locked or have
been relogged and pinned since first added to the queue. If the
attempt to log such an item results in a log I/O error, the error
processing can shutdown the fs, remove the item from the AIL, stale
the buffer (dropping the LRU reference) and clear its delwri queue
state. The latter bit means the buffer will be released from a
delwri queue on the next submission attempt, but this might never
occur if the filesystem has shutdown and the AIL is empty.
This means that such buffers are held indefinitely by the AIL delwri
queue across destruction of the AIL. Aside from being a memory leak,
these buffers can also hold references to in-core perag structures.
The latter problem manifests as a generic/475 failure, reproducing
the following asserts at unmount time:
XFS: Assertion failed: atomic_read(&pag->pag_ref) == 0,
file: fs/xfs/xfs_mount.c, line: 151
XFS: Assertion failed: atomic_read(&pag->pag_ref) == 0,
file: fs/xfs/xfs_mount.c, line: 132
To prevent this problem, clear the AIL delwri queue as a final step
before xfsaild() exit. The !empty state should never occur in the
normal case, so add an assert to catch unexpected problems going
forward.
[dgc: add comment explaining need for xfs_buf_delwri_cancel() after
calling xfs_buf_delwri_submit_nowait().]
Signed-off-by: Brian Foster <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/xfs/xfs_buf.c | 7 +++++++
fs/xfs/xfs_trans_ail.c | 28 ++++++++++++++++++++++------
2 files changed, 29 insertions(+), 6 deletions(-)
diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c
index f4a89c94c931b..e36124546d0db 100644
--- a/fs/xfs/xfs_buf.c
+++ b/fs/xfs/xfs_buf.c
@@ -2025,6 +2025,13 @@ xfs_buf_delwri_submit_buffers(
* is only safely useable for callers that can track I/O completion by higher
* level means, e.g. AIL pushing as the @buffer_list is consumed in this
* function.
+ *
+ * Note: this function will skip buffers it would block on, and in doing so
+ * leaves them on @buffer_list so they can be retried on a later pass. As such,
+ * it is up to the caller to ensure that the buffer list is fully submitted or
+ * cancelled appropriately when they are finished with the list. Failure to
+ * cancel or resubmit the list until it is empty will result in leaked buffers
+ * at unmount time.
*/
int
xfs_buf_delwri_submit_nowait(
diff --git a/fs/xfs/xfs_trans_ail.c b/fs/xfs/xfs_trans_ail.c
index 55326f971cb36..d3a4e89bf4a0d 100644
--- a/fs/xfs/xfs_trans_ail.c
+++ b/fs/xfs/xfs_trans_ail.c
@@ -531,17 +531,33 @@ xfsaild(
set_current_state(TASK_INTERRUPTIBLE);
/*
- * Check kthread_should_stop() after we set the task state
- * to guarantee that we either see the stop bit and exit or
- * the task state is reset to runnable such that it's not
- * scheduled out indefinitely and detects the stop bit at
- * next iteration.
- *
+ * Check kthread_should_stop() after we set the task state to
+ * guarantee that we either see the stop bit and exit or the
+ * task state is reset to runnable such that it's not scheduled
+ * out indefinitely and detects the stop bit at next iteration.
* A memory barrier is included in above task state set to
* serialize again kthread_stop().
*/
if (kthread_should_stop()) {
__set_current_state(TASK_RUNNING);
+
+ /*
+ * The caller forces out the AIL before stopping the
+ * thread in the common case, which means the delwri
+ * queue is drained. In the shutdown case, the queue may
+ * still hold relogged buffers that haven't been
+ * submitted because they were pinned since added to the
+ * queue.
+ *
+ * Log I/O error processing stales the underlying buffer
+ * and clears the delwri state, expecting the buf to be
+ * removed on the next submission attempt. That won't
+ * happen if we're shutting down, so this is the last
+ * opportunity to release such buffers from the queue.
+ */
+ ASSERT(list_empty(&ailp->ail_buf_list) ||
+ XFS_FORCED_SHUTDOWN(ailp->ail_mount));
+ xfs_buf_delwri_cancel(&ailp->ail_buf_list);
break;
}
--
2.20.1
From: Kyeongdon Kim <[email protected]>
[ Upstream commit 33c4368ee2589c165aebd8d388cbd91e9adb9688 ]
This fixes the "'hash' may be used uninitialized in this function"
net/unix/af_unix.c:1041:20: warning: 'hash' may be used uninitialized in this function [-Wmaybe-uninitialized]
addr->hash = hash ^ sk->sk_type;
Signed-off-by: Kyeongdon Kim <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/unix/af_unix.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 231b6c032d2c3..d2d6ff0c6265d 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -225,6 +225,8 @@ static inline void unix_release_addr(struct unix_address *addr)
static int unix_mkname(struct sockaddr_un *sunaddr, int len, unsigned int *hashp)
{
+ *hashp = 0;
+
if (len <= sizeof(short) || len > sizeof(*sunaddr))
return -EINVAL;
if (!sunaddr || sunaddr->sun_family != AF_UNIX)
--
2.20.1
From: Netanel Belgazal <[email protected]>
[ Upstream commit 8c590f9776386b8f697fd0b7ed6142ae6e3de79e ]
The Kconfig limitation of X86 is to too wide.
The ENA driver only requires a little endian dependency.
Change the dependency to be on little endian CPU.
Signed-off-by: Netanel Belgazal <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/amazon/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/amazon/Kconfig b/drivers/net/ethernet/amazon/Kconfig
index 99b30353541ab..9e87d7b8360f5 100644
--- a/drivers/net/ethernet/amazon/Kconfig
+++ b/drivers/net/ethernet/amazon/Kconfig
@@ -17,7 +17,7 @@ if NET_VENDOR_AMAZON
config ENA_ETHERNET
tristate "Elastic Network Adapter (ENA) support"
- depends on (PCI_MSI && X86)
+ depends on PCI_MSI && !CPU_BIG_ENDIAN
---help---
This driver supports Elastic Network Adapter (ENA)"
--
2.20.1
From: Jon Derrick <[email protected]>
[ Upstream commit dc8af3a827df6d4bb925d3b81b7ec94a7cce9482 ]
The VMD removal path calls pci_stop_root_busi(), which tears down the pcie
tree, including detaching all of the attached drivers. During driver
detachment, devices may use pci_release_region() to release resources.
This path relies on the resource being accessible in resource tree.
By detaching the child domain from the parent resource domain prior to
stopping the bus, we are preventing the list traversal from finding the
resource to be freed. If we instead detach the resource after stopping
the bus, we will have properly freed the resource and detaching is
simply accounting at that point.
Without this order, the resource is never freed and is orphaned on VMD
removal, leading to a warning:
[ 181.940162] Trying to free nonexistent resource <e5a10000-e5a13fff>
Fixes: 2c2c5c5cd213 ("x86/PCI: VMD: Attach VMD resources to parent domain's resource tree")
Signed-off-by: Jon Derrick <[email protected]>
[[email protected]: updated commit log]
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/vmd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
index 65eaa6b618685..ab36e5ca1aca3 100644
--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -818,12 +818,12 @@ static void vmd_remove(struct pci_dev *dev)
{
struct vmd_dev *vmd = pci_get_drvdata(dev);
- vmd_detach_resources(vmd);
sysfs_remove_link(&vmd->dev->dev.kobj, "domain");
pci_stop_root_bus(vmd->bus);
pci_remove_root_bus(vmd->bus);
vmd_cleanup_srcu(vmd);
vmd_teardown_dma_ops(vmd);
+ vmd_detach_resources(vmd);
irq_domain_remove(vmd->irq_domain);
}
--
2.20.1
From: Uros Bizjak <[email protected]>
[ Upstream commit 5ebb272b2ea7e02911a03a893f8d922d49f9bb4a ]
Register operand size of invvpid and invept instruction in 64-bit mode
has always 64 bits. Adjust inline function argument type to reflect
correct size.
Signed-off-by: Uros Bizjak <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/vmx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 3f40edf6fdeb3..80b0942fb84db 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2079,7 +2079,7 @@ static int __find_msr_index(struct vcpu_vmx *vmx, u32 msr)
return -1;
}
-static inline void __invvpid(int ext, u16 vpid, gva_t gva)
+static inline void __invvpid(unsigned long ext, u16 vpid, gva_t gva)
{
struct {
u64 vpid : 16;
@@ -2094,7 +2094,7 @@ static inline void __invvpid(int ext, u16 vpid, gva_t gva)
BUG_ON(error);
}
-static inline void __invept(int ext, u64 eptp, gpa_t gpa)
+static inline void __invept(unsigned long ext, u64 eptp, gpa_t gpa)
{
struct {
u64 eptp, gpa;
--
2.20.1
From: "Gustavo A. R. Silva" <[email protected]>
[ Upstream commit f4445bb93d82a984657b469e63118c2794a4c3d3 ]
There is a NULL pointer dereference in case *slot* happens to be NULL at
lines 1053 and 1878:
struct hisi_sas_cq *cq =
&hisi_hba->cq[slot->dlvry_queue];
Notice that *slot* is being NULL checked at lines 1057 and 1881:
if (slot), which implies it may be NULL.
Fix this by placing the declaration and definition of variable cq, which
contains the pointer dereference slot->dlvry_queue, after slot has been
properly NULL checked.
Addresses-Coverity-ID: 1474515 ("Dereference before null check")
Addresses-Coverity-ID: 1474520 ("Dereference before null check")
Fixes: 584f53fe5f52 ("scsi: hisi_sas: Fix the race between IO completion and timeout for SMP/internal IO")
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: Xiang Chen <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index d4a2625a44232..f478d1f50dfc0 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1025,11 +1025,11 @@ static int hisi_sas_exec_internal_tmf_task(struct domain_device *device,
if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
struct hisi_sas_slot *slot = task->lldd_task;
- struct hisi_sas_cq *cq =
- &hisi_hba->cq[slot->dlvry_queue];
dev_err(dev, "abort tmf: TMF task timeout and not done\n");
if (slot) {
+ struct hisi_sas_cq *cq =
+ &hisi_hba->cq[slot->dlvry_queue];
/*
* flush tasklet to avoid free'ing task
* before using task in IO completion
@@ -1856,10 +1856,10 @@ hisi_sas_internal_task_abort(struct hisi_hba *hisi_hba,
if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
struct hisi_sas_slot *slot = task->lldd_task;
- struct hisi_sas_cq *cq =
- &hisi_hba->cq[slot->dlvry_queue];
if (slot) {
+ struct hisi_sas_cq *cq =
+ &hisi_hba->cq[slot->dlvry_queue];
/*
* flush tasklet to avoid free'ing task
* before using task in IO completion
--
2.20.1
From: Thomas Richter <[email protected]>
[ Upstream commit ec0c0bb489727de0d4dca6a00be6970ab8a3b30a ]
Return an error when the function debug_register() fails allocating
the debug handle.
Also remove the registered debug handle when the initialization fails
later on.
Signed-off-by: Thomas Richter <[email protected]>
Reviewed-by: Hendrik Brueckner <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/kernel/perf_cpum_sf.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index 44404836e9d11..df92c2af99b69 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -2045,14 +2045,17 @@ static int __init init_cpum_sampling_pmu(void)
}
sfdbg = debug_register(KMSG_COMPONENT, 2, 1, 80);
- if (!sfdbg)
+ if (!sfdbg) {
pr_err("Registering for s390dbf failed\n");
+ return -ENOMEM;
+ }
debug_register_view(sfdbg, &debug_sprintf_view);
err = register_external_irq(EXT_IRQ_MEASURE_ALERT,
cpumf_measurement_alert);
if (err) {
pr_cpumsf_err(RS_INIT_FAILURE_ALRT);
+ debug_unregister(sfdbg);
goto out;
}
@@ -2061,6 +2064,7 @@ static int __init init_cpum_sampling_pmu(void)
pr_cpumsf_err(RS_INIT_FAILURE_PERF);
unregister_external_irq(EXT_IRQ_MEASURE_ALERT,
cpumf_measurement_alert);
+ debug_unregister(sfdbg);
goto out;
}
--
2.20.1
From: Jithu Joseph <[email protected]>
[ Upstream commit b61b8bba18fe2b63d38fdaf9b83de25e2d787dfe ]
When the last CPU in an rdt_domain goes offline, its rdt_domain struct gets
freed. Current pseudo-locking code is unaware of this scenario and tries to
dereference the freed structure in a few places.
Add checks to prevent pseudo-locking code from doing this.
While further work is needed to seamlessly restore resource groups (not
just pseudo-locking) to their configuration when the domain is brought back
online, the immediate issue of invalid pointers is addressed here.
Fixes: f4e80d67a5274 ("x86/intel_rdt: Resctrl files reflect pseudo-locked information")
Fixes: 443810fe61605 ("x86/intel_rdt: Create debugfs files for pseudo-locking testing")
Fixes: 746e08590b864 ("x86/intel_rdt: Create character device exposing pseudo-locked region")
Fixes: 33dc3e410a0d9 ("x86/intel_rdt: Make CPU information accessible for pseudo-locked regions")
Signed-off-by: Jithu Joseph <[email protected]>
Signed-off-by: Reinette Chatre <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lkml.kernel.org/r/231f742dbb7b00a31cc104416860e27dba6b072d.1539384145.git.reinette.chatre@intel.com
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/cpu/intel_rdt.c | 7 ++++
arch/x86/kernel/cpu/intel_rdt_ctrlmondata.c | 12 +++++--
arch/x86/kernel/cpu/intel_rdt_pseudo_lock.c | 10 ++++++
arch/x86/kernel/cpu/intel_rdt_rdtgroup.c | 38 +++++++++++++++------
4 files changed, 55 insertions(+), 12 deletions(-)
diff --git a/arch/x86/kernel/cpu/intel_rdt.c b/arch/x86/kernel/cpu/intel_rdt.c
index abb71ac704433..4025fc6dd8f62 100644
--- a/arch/x86/kernel/cpu/intel_rdt.c
+++ b/arch/x86/kernel/cpu/intel_rdt.c
@@ -610,6 +610,13 @@ static void domain_remove_cpu(int cpu, struct rdt_resource *r)
cancel_delayed_work(&d->cqm_limbo);
}
+ /*
+ * rdt_domain "d" is going to be freed below, so clear
+ * its pointer from pseudo_lock_region struct.
+ */
+ if (d->plr)
+ d->plr->d = NULL;
+
kfree(d->ctrl_val);
kfree(d->mbps_val);
kfree(d->rmid_busy_llc);
diff --git a/arch/x86/kernel/cpu/intel_rdt_ctrlmondata.c b/arch/x86/kernel/cpu/intel_rdt_ctrlmondata.c
index 627e5c809b33d..efa4a519f5e55 100644
--- a/arch/x86/kernel/cpu/intel_rdt_ctrlmondata.c
+++ b/arch/x86/kernel/cpu/intel_rdt_ctrlmondata.c
@@ -408,8 +408,16 @@ int rdtgroup_schemata_show(struct kernfs_open_file *of,
for_each_alloc_enabled_rdt_resource(r)
seq_printf(s, "%s:uninitialized\n", r->name);
} else if (rdtgrp->mode == RDT_MODE_PSEUDO_LOCKED) {
- seq_printf(s, "%s:%d=%x\n", rdtgrp->plr->r->name,
- rdtgrp->plr->d->id, rdtgrp->plr->cbm);
+ if (!rdtgrp->plr->d) {
+ rdt_last_cmd_clear();
+ rdt_last_cmd_puts("Cache domain offline\n");
+ ret = -ENODEV;
+ } else {
+ seq_printf(s, "%s:%d=%x\n",
+ rdtgrp->plr->r->name,
+ rdtgrp->plr->d->id,
+ rdtgrp->plr->cbm);
+ }
} else {
closid = rdtgrp->closid;
for_each_alloc_enabled_rdt_resource(r) {
diff --git a/arch/x86/kernel/cpu/intel_rdt_pseudo_lock.c b/arch/x86/kernel/cpu/intel_rdt_pseudo_lock.c
index 912d53939f4f4..a999a58ca3318 100644
--- a/arch/x86/kernel/cpu/intel_rdt_pseudo_lock.c
+++ b/arch/x86/kernel/cpu/intel_rdt_pseudo_lock.c
@@ -1116,6 +1116,11 @@ static int pseudo_lock_measure_cycles(struct rdtgroup *rdtgrp, int sel)
goto out;
}
+ if (!plr->d) {
+ ret = -ENODEV;
+ goto out;
+ }
+
plr->thread_done = 0;
cpu = cpumask_first(&plr->d->cpu_mask);
if (!cpu_online(cpu)) {
@@ -1429,6 +1434,11 @@ static int pseudo_lock_dev_mmap(struct file *filp, struct vm_area_struct *vma)
plr = rdtgrp->plr;
+ if (!plr->d) {
+ mutex_unlock(&rdtgroup_mutex);
+ return -ENODEV;
+ }
+
/*
* Task is required to run with affinity to the cpus associated
* with the pseudo-locked region. If this is not the case the task
diff --git a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c
index 2013699a5c54a..4f099b48d1ece 100644
--- a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c
+++ b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c
@@ -268,17 +268,27 @@ static int rdtgroup_cpus_show(struct kernfs_open_file *of,
struct seq_file *s, void *v)
{
struct rdtgroup *rdtgrp;
+ struct cpumask *mask;
int ret = 0;
rdtgrp = rdtgroup_kn_lock_live(of->kn);
if (rdtgrp) {
- if (rdtgrp->mode == RDT_MODE_PSEUDO_LOCKED)
- seq_printf(s, is_cpu_list(of) ? "%*pbl\n" : "%*pb\n",
- cpumask_pr_args(&rdtgrp->plr->d->cpu_mask));
- else
+ if (rdtgrp->mode == RDT_MODE_PSEUDO_LOCKED) {
+ if (!rdtgrp->plr->d) {
+ rdt_last_cmd_clear();
+ rdt_last_cmd_puts("Cache domain offline\n");
+ ret = -ENODEV;
+ } else {
+ mask = &rdtgrp->plr->d->cpu_mask;
+ seq_printf(s, is_cpu_list(of) ?
+ "%*pbl\n" : "%*pb\n",
+ cpumask_pr_args(mask));
+ }
+ } else {
seq_printf(s, is_cpu_list(of) ? "%*pbl\n" : "%*pb\n",
cpumask_pr_args(&rdtgrp->cpu_mask));
+ }
} else {
ret = -ENOENT;
}
@@ -1180,6 +1190,7 @@ static int rdtgroup_size_show(struct kernfs_open_file *of,
struct rdt_resource *r;
struct rdt_domain *d;
unsigned int size;
+ int ret = 0;
bool sep;
u32 ctrl;
@@ -1190,11 +1201,18 @@ static int rdtgroup_size_show(struct kernfs_open_file *of,
}
if (rdtgrp->mode == RDT_MODE_PSEUDO_LOCKED) {
- seq_printf(s, "%*s:", max_name_width, rdtgrp->plr->r->name);
- size = rdtgroup_cbm_to_size(rdtgrp->plr->r,
- rdtgrp->plr->d,
- rdtgrp->plr->cbm);
- seq_printf(s, "%d=%u\n", rdtgrp->plr->d->id, size);
+ if (!rdtgrp->plr->d) {
+ rdt_last_cmd_clear();
+ rdt_last_cmd_puts("Cache domain offline\n");
+ ret = -ENODEV;
+ } else {
+ seq_printf(s, "%*s:", max_name_width,
+ rdtgrp->plr->r->name);
+ size = rdtgroup_cbm_to_size(rdtgrp->plr->r,
+ rdtgrp->plr->d,
+ rdtgrp->plr->cbm);
+ seq_printf(s, "%d=%u\n", rdtgrp->plr->d->id, size);
+ }
goto out;
}
@@ -1224,7 +1242,7 @@ static int rdtgroup_size_show(struct kernfs_open_file *of,
out:
rdtgroup_kn_unlock(of->kn);
- return 0;
+ return ret;
}
/* rdtgroup information files for one cache resource. */
--
2.20.1
From: Aravinda Prasad <[email protected]>
[ Upstream commit c6c26fb55e8e4b3fc376be5611685990a17de27a ]
This patch exports the raw per-CPU VPA data via debugfs.
A per-CPU file is created which exports the VPA data of
that CPU to help debug some of the VPA related issues or
to analyze the per-CPU VPA related statistics.
v3: Removed offline CPU check.
v2: Included offline CPU check and other review comments.
Signed-off-by: Aravinda Prasad <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/pseries/lpar.c | 54 +++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index ea602f7f97ce1..49e3a88b6a0c1 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -48,6 +48,7 @@
#include <asm/kexec.h>
#include <asm/fadump.h>
#include <asm/asm-prototypes.h>
+#include <asm/debugfs.h>
#include "pseries.h"
@@ -1032,3 +1033,56 @@ static int __init reserve_vrma_context_id(void)
return 0;
}
machine_device_initcall(pseries, reserve_vrma_context_id);
+
+#ifdef CONFIG_DEBUG_FS
+/* debugfs file interface for vpa data */
+static ssize_t vpa_file_read(struct file *filp, char __user *buf, size_t len,
+ loff_t *pos)
+{
+ int cpu = (long)filp->private_data;
+ struct lppaca *lppaca = &lppaca_of(cpu);
+
+ return simple_read_from_buffer(buf, len, pos, lppaca,
+ sizeof(struct lppaca));
+}
+
+static const struct file_operations vpa_fops = {
+ .open = simple_open,
+ .read = vpa_file_read,
+ .llseek = default_llseek,
+};
+
+static int __init vpa_debugfs_init(void)
+{
+ char name[16];
+ long i;
+ static struct dentry *vpa_dir;
+
+ if (!firmware_has_feature(FW_FEATURE_SPLPAR))
+ return 0;
+
+ vpa_dir = debugfs_create_dir("vpa", powerpc_debugfs_root);
+ if (!vpa_dir) {
+ pr_warn("%s: can't create vpa root dir\n", __func__);
+ return -ENOMEM;
+ }
+
+ /* set up the per-cpu vpa file*/
+ for_each_possible_cpu(i) {
+ struct dentry *d;
+
+ sprintf(name, "cpu-%ld", i);
+
+ d = debugfs_create_file(name, 0400, vpa_dir, (void *)i,
+ &vpa_fops);
+ if (!d) {
+ pr_warn("%s: can't create per-cpu vpa file\n",
+ __func__);
+ return -ENOMEM;
+ }
+ }
+
+ return 0;
+}
+machine_arch_initcall(pseries, vpa_debugfs_init);
+#endif /* CONFIG_DEBUG_FS */
--
2.20.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit 20054597f169090109fc3f0dfa1a48583f4178a4 ]
Clang warns when one enumerated type is implicitly converted to another.
drivers/scsi/iscsi_tcp.c:803:15: warning: implicit conversion from
enumeration type 'enum iscsi_host_param' to different enumeration type
'enum iscsi_param' [-Wenum-conversion]
&addr, param, buf);
^~~~~
1 warning generated.
iscsi_conn_get_addr_param handles ISCSI_HOST_PARAM_IPADDRESS just fine
so add an explicit cast to iscsi_param to make it clear to Clang that
this is expected behavior.
Link: https://github.com/ClangBuiltLinux/linux/issues/153
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/iscsi_tcp.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index b025a0b743417..23354f206533b 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -800,7 +800,8 @@ static int iscsi_sw_tcp_host_get_param(struct Scsi_Host *shost,
return rc;
return iscsi_conn_get_addr_param((struct sockaddr_storage *)
- &addr, param, buf);
+ &addr,
+ (enum iscsi_param)param, buf);
default:
return iscsi_host_get_param(shost, param, buf);
}
--
2.20.1
From: Michael Ellerman <[email protected]>
[ Upstream commit 5c6499b7041b43807dfaeda28aa87fc0e62558f7 ]
When we have CONFIG_STRICT_KERNEL_RWX enabled, we try to split the
kernel linear (1:1) mapping so that the kernel text is in a separate
page to kernel data, so we can mark the former read-only.
We could achieve that just by always using 64K pages for the linear
mapping, but we try to be smarter. Instead we use huge pages when
possible, and only switch to smaller pages when necessary.
However we have an off-by-one bug in that logic, which causes us to
calculate the wrong boundary between text and data.
For example with the end of the kernel text at 16M we see:
radix-mmu: Mapped 0x0000000000000000-0x0000000001200000 with 64.0 KiB pages
radix-mmu: Mapped 0x0000000001200000-0x0000000040000000 with 2.00 MiB pages
radix-mmu: Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages
ie. we mapped from 0 to 18M with 64K pages, even though the boundary
between text and data is at 16M.
With the fix we see we're correctly hitting the 16M boundary:
radix-mmu: Mapped 0x0000000000000000-0x0000000001000000 with 64.0 KiB pages
radix-mmu: Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages
radix-mmu: Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/mm/pgtable-radix.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/mm/pgtable-radix.c b/arch/powerpc/mm/pgtable-radix.c
index 3ea4c1f107d7e..24a2eadc8c21a 100644
--- a/arch/powerpc/mm/pgtable-radix.c
+++ b/arch/powerpc/mm/pgtable-radix.c
@@ -294,14 +294,14 @@ static int __meminit create_physical_mapping(unsigned long start,
}
if (split_text_mapping && (mapping_size == PUD_SIZE) &&
- (addr <= __pa_symbol(__init_begin)) &&
+ (addr < __pa_symbol(__init_begin)) &&
(addr + mapping_size) >= __pa_symbol(_stext)) {
max_mapping_size = PMD_SIZE;
goto retry;
}
if (split_text_mapping && (mapping_size == PMD_SIZE) &&
- (addr <= __pa_symbol(__init_begin)) &&
+ (addr < __pa_symbol(__init_begin)) &&
(addr + mapping_size) >= __pa_symbol(_stext)) {
mapping_size = PAGE_SIZE;
psize = mmu_virtual_psize;
--
2.20.1
From: Michael Ellerman <[email protected]>
[ Upstream commit 81d1b54dec95209ab5e5be2cf37182885f998753 ]
When we have CONFIG_STRICT_KERNEL_RWX enabled, we want to split the
linear mapping at the text/data boundary so we can map the kernel
text read only.
Currently we always use a small page at the text/data boundary, even
when that's not necessary:
Mapped 0x0000000000000000-0x0000000000e00000 with 2.00 MiB pages
Mapped 0x0000000000e00000-0x0000000001000000 with 64.0 KiB pages
Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages
This is because the check that the mapping crosses the __init_begin
boundary is too strict, it also returns true when we map exactly up to
the boundary.
So fix it to check that the mapping would actually map past
__init_begin, and with that we see:
Mapped 0x0000000000000000-0x0000000040000000 with 2.00 MiB pages
Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/mm/pgtable-radix.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/mm/pgtable-radix.c b/arch/powerpc/mm/pgtable-radix.c
index b387c7b917b7e..69caeb5bccb21 100644
--- a/arch/powerpc/mm/pgtable-radix.c
+++ b/arch/powerpc/mm/pgtable-radix.c
@@ -295,14 +295,14 @@ static int __meminit create_physical_mapping(unsigned long start,
if (split_text_mapping && (mapping_size == PUD_SIZE) &&
(addr < __pa_symbol(__init_begin)) &&
- (addr + mapping_size) >= __pa_symbol(__init_begin)) {
+ (addr + mapping_size) > __pa_symbol(__init_begin)) {
max_mapping_size = PMD_SIZE;
goto retry;
}
if (split_text_mapping && (mapping_size == PMD_SIZE) &&
(addr < __pa_symbol(__init_begin)) &&
- (addr + mapping_size) >= __pa_symbol(__init_begin)) {
+ (addr + mapping_size) > __pa_symbol(__init_begin)) {
mapping_size = PAGE_SIZE;
psize = mmu_virtual_psize;
}
--
2.20.1
From: Luis Henriques <[email protected]>
[ Upstream commit bddff633ab7bc60a18a86ac8b322695b6f8594d0 ]
Current implementation of cephfs fallocate isn't correct as it doesn't
really reserve the space in the cluster, which means that a subsequent
call to a write may actually fail due to lack of space. In fact, it is
currently possible to fallocate an amount space that is larger than the
free space in the cluster. It has behaved this way since the initial
commit ad7a60de882a ("ceph: punch hole support").
Since there's no easy solution to fix this at the moment, this patch
simply removes support for all fallocate operations but
FALLOC_FL_PUNCH_HOLE (which implies FALLOC_FL_KEEP_SIZE).
Link: https://tracker.ceph.com/issues/36317
Signed-off-by: Luis Henriques <[email protected]>
Reviewed-by: "Yan, Zheng" <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ceph/file.c | 45 +++++++++------------------------------------
1 file changed, 9 insertions(+), 36 deletions(-)
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index 92ab204336829..91a7ad259bcf2 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -1735,7 +1735,6 @@ static long ceph_fallocate(struct file *file, int mode,
struct ceph_file_info *fi = file->private_data;
struct inode *inode = file_inode(file);
struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
struct ceph_cap_flush *prealloc_cf;
int want, got = 0;
int dirty;
@@ -1743,10 +1742,7 @@ static long ceph_fallocate(struct file *file, int mode,
loff_t endoff = 0;
loff_t size;
- if ((offset + length) > max(i_size_read(inode), fsc->max_file_size))
- return -EFBIG;
-
- if (mode & ~(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE))
+ if (mode != (FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE))
return -EOPNOTSUPP;
if (!S_ISREG(inode->i_mode))
@@ -1763,18 +1759,6 @@ static long ceph_fallocate(struct file *file, int mode,
goto unlock;
}
- if (!(mode & (FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE)) &&
- ceph_quota_is_max_bytes_exceeded(inode, offset + length)) {
- ret = -EDQUOT;
- goto unlock;
- }
-
- if (ceph_osdmap_flag(&fsc->client->osdc, CEPH_OSDMAP_FULL) &&
- !(mode & FALLOC_FL_PUNCH_HOLE)) {
- ret = -ENOSPC;
- goto unlock;
- }
-
if (ci->i_inline_version != CEPH_INLINE_NONE) {
ret = ceph_uninline_data(file, NULL);
if (ret < 0)
@@ -1782,12 +1766,12 @@ static long ceph_fallocate(struct file *file, int mode,
}
size = i_size_read(inode);
- if (!(mode & FALLOC_FL_KEEP_SIZE)) {
- endoff = offset + length;
- ret = inode_newsize_ok(inode, endoff);
- if (ret)
- goto unlock;
- }
+
+ /* Are we punching a hole beyond EOF? */
+ if (offset >= size)
+ goto unlock;
+ if ((offset + length) > size)
+ length = size - offset;
if (fi->fmode & CEPH_FILE_MODE_LAZY)
want = CEPH_CAP_FILE_BUFFER | CEPH_CAP_FILE_LAZYIO;
@@ -1798,16 +1782,8 @@ static long ceph_fallocate(struct file *file, int mode,
if (ret < 0)
goto unlock;
- if (mode & FALLOC_FL_PUNCH_HOLE) {
- if (offset < size)
- ceph_zero_pagecache_range(inode, offset, length);
- ret = ceph_zero_objects(inode, offset, length);
- } else if (endoff > size) {
- truncate_pagecache_range(inode, size, -1);
- if (ceph_inode_set_size(inode, endoff))
- ceph_check_caps(ceph_inode(inode),
- CHECK_CAPS_AUTHONLY, NULL);
- }
+ ceph_zero_pagecache_range(inode, offset, length);
+ ret = ceph_zero_objects(inode, offset, length);
if (!ret) {
spin_lock(&ci->i_ceph_lock);
@@ -1817,9 +1793,6 @@ static long ceph_fallocate(struct file *file, int mode,
spin_unlock(&ci->i_ceph_lock);
if (dirty)
__mark_inode_dirty(inode, dirty);
- if ((endoff > size) &&
- ceph_quota_is_max_bytes_approaching(inode, endoff))
- ceph_check_caps(ci, CHECK_CAPS_NODELAY, NULL);
}
ceph_put_cap_refs(ci, got);
--
2.20.1
From: Fabio Estevam <[email protected]>
[ Upstream commit 55143439b7b501882bea9d95a54adfe00ffc79a3 ]
When trying to read any MC13892 ADC channel on a imx51-babbage board:
The MC13892 PMIC shutdowns completely.
After debugging this issue and comparing the MC13892 and MC13783
initializations done in the vendor kernel, it was noticed that the
CHRGRAWDIV bit of the ADC0 register was not being set.
This bit is set by default after power on, but the driver was
clearing it.
After setting this bit it is possible to read the ADC values correctly.
Signed-off-by: Fabio Estevam <[email protected]>
Tested-by: Chris Healy <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/mc13xxx-core.c | 3 ++-
include/linux/mfd/mc13xxx.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c
index 234febfe6398b..d0bf50e3568d7 100644
--- a/drivers/mfd/mc13xxx-core.c
+++ b/drivers/mfd/mc13xxx-core.c
@@ -278,7 +278,8 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
if (ret)
goto out;
- adc0 = MC13XXX_ADC0_ADINC1 | MC13XXX_ADC0_ADINC2;
+ adc0 = MC13XXX_ADC0_ADINC1 | MC13XXX_ADC0_ADINC2 |
+ MC13XXX_ADC0_CHRGRAWDIV;
adc1 = MC13XXX_ADC1_ADEN | MC13XXX_ADC1_ADTRIGIGN | MC13XXX_ADC1_ASC;
/*
diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h
index 54a3cd808f9e6..2ad9bdc0a5ec8 100644
--- a/include/linux/mfd/mc13xxx.h
+++ b/include/linux/mfd/mc13xxx.h
@@ -249,6 +249,7 @@ struct mc13xxx_platform_data {
#define MC13XXX_ADC0_TSMOD0 (1 << 12)
#define MC13XXX_ADC0_TSMOD1 (1 << 13)
#define MC13XXX_ADC0_TSMOD2 (1 << 14)
+#define MC13XXX_ADC0_CHRGRAWDIV (1 << 15)
#define MC13XXX_ADC0_ADINC1 (1 << 16)
#define MC13XXX_ADC0_ADINC2 (1 << 17)
--
2.20.1
From: Masami Hiramatsu <[email protected]>
[ Upstream commit 2452c96e617a0ff6fb2692e55217a3fa57a7322c ]
Test $comm in kprobe-event argument syntax testcase
only if it is supported on the kernel because
$comm has been introduced 4.8 kernel.
So on older stable kernel, it should be skipped.
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Shuah Khan (Samsung OSG) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc | 3 +++
1 file changed, 3 insertions(+)
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc
index d026ff4e562f3..92ffb3bd33d82 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc
@@ -78,8 +78,11 @@ test_badarg "\$stackp" "\$stack0+10" "\$stack1-10"
echo "r ${PROBEFUNC} \$retval" > kprobe_events
! echo "p ${PROBEFUNC} \$retval" > kprobe_events
+# $comm was introduced in 4.8, older kernels reject it.
+if grep -A1 "fetcharg:" README | grep -q '\$comm' ; then
: "Comm access"
test_goodarg "\$comm"
+fi
: "Indirect memory access"
test_goodarg "+0(${GOODREG})" "-0(${GOODREG})" "+10(\$stack)" \
--
2.20.1
From: Xiang Chen <[email protected]>
[ Upstream commit 584f53fe5f529d877968c711a095923c1ed12307 ]
If SMP/internal IO times out, we will possibly free the task immediately.
However if the IO actually completes at the same time, the IO completion
may refer to task which has been freed.
So to solve the issue, flush the tasklet to finish IO completion before
free'ing slot/task.
Signed-off-by: Xiang Chen <[email protected]>
Signed-off-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 55 ++++++++++++++++++++++-----
1 file changed, 46 insertions(+), 9 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index e9747379384b2..d4a2625a44232 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -955,8 +955,7 @@ static int hisi_sas_control_phy(struct asd_sas_phy *sas_phy, enum phy_func func,
static void hisi_sas_task_done(struct sas_task *task)
{
- if (!del_timer(&task->slow_task->timer))
- return;
+ del_timer(&task->slow_task->timer);
complete(&task->slow_task->completion);
}
@@ -965,13 +964,17 @@ static void hisi_sas_tmf_timedout(struct timer_list *t)
struct sas_task_slow *slow = from_timer(slow, t, timer);
struct sas_task *task = slow->task;
unsigned long flags;
+ bool is_completed = true;
spin_lock_irqsave(&task->task_state_lock, flags);
- if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ is_completed = false;
+ }
spin_unlock_irqrestore(&task->task_state_lock, flags);
- complete(&task->slow_task->completion);
+ if (!is_completed)
+ complete(&task->slow_task->completion);
}
#define TASK_TIMEOUT 20
@@ -1022,10 +1025,18 @@ static int hisi_sas_exec_internal_tmf_task(struct domain_device *device,
if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
struct hisi_sas_slot *slot = task->lldd_task;
+ struct hisi_sas_cq *cq =
+ &hisi_hba->cq[slot->dlvry_queue];
dev_err(dev, "abort tmf: TMF task timeout and not done\n");
- if (slot)
+ if (slot) {
+ /*
+ * flush tasklet to avoid free'ing task
+ * before using task in IO completion
+ */
+ tasklet_kill(&cq->tasklet);
slot->task = NULL;
+ }
goto ex_err;
} else
@@ -1401,6 +1412,17 @@ static int hisi_sas_abort_task(struct sas_task *task)
spin_lock_irqsave(&task->task_state_lock, flags);
if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+ struct hisi_sas_slot *slot = task->lldd_task;
+ struct hisi_sas_cq *cq;
+
+ if (slot) {
+ /*
+ * flush tasklet to avoid free'ing task
+ * before using task in IO completion
+ */
+ cq = &hisi_hba->cq[slot->dlvry_queue];
+ tasklet_kill(&cq->tasklet);
+ }
spin_unlock_irqrestore(&task->task_state_lock, flags);
rc = TMF_RESP_FUNC_COMPLETE;
goto out;
@@ -1456,12 +1478,19 @@ static int hisi_sas_abort_task(struct sas_task *task)
/* SMP */
struct hisi_sas_slot *slot = task->lldd_task;
u32 tag = slot->idx;
+ struct hisi_sas_cq *cq = &hisi_hba->cq[slot->dlvry_queue];
rc = hisi_sas_internal_task_abort(hisi_hba, device,
HISI_SAS_INT_ABT_CMD, tag);
if (((rc < 0) || (rc == TMF_RESP_FUNC_FAILED)) &&
- task->lldd_task)
- hisi_sas_do_release_task(hisi_hba, task, slot);
+ task->lldd_task) {
+ /*
+ * flush tasklet to avoid free'ing task
+ * before using task in IO completion
+ */
+ tasklet_kill(&cq->tasklet);
+ slot->task = NULL;
+ }
}
out:
@@ -1827,9 +1856,17 @@ hisi_sas_internal_task_abort(struct hisi_hba *hisi_hba,
if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
struct hisi_sas_slot *slot = task->lldd_task;
-
- if (slot)
+ struct hisi_sas_cq *cq =
+ &hisi_hba->cq[slot->dlvry_queue];
+
+ if (slot) {
+ /*
+ * flush tasklet to avoid free'ing task
+ * before using task in IO completion
+ */
+ tasklet_kill(&cq->tasklet);
slot->task = NULL;
+ }
dev_err(dev, "internal task abort: timeout and not done.\n");
res = -EIO;
goto exit;
--
2.20.1
From: Philipp Klocke <[email protected]>
[ Upstream commit eb7ebfa3c1989aa8e59d5e68ab3cddd7df1bfb27 ]
Compiling with clang yields the following warning:
sound/i2c/cs8427.c:140:31: warning: implicit conversion from 'int'
to 'char' changes value from 160 to -96 [-Wconstant-conversion]
data[0] = CS8427_REG_AUTOINC | CS8427_REG_CORU_DATABUF;
~ ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
Because CS8427_REG_AUTOINC is defined as 128, it is too big for a
char field.
So change data from char to unsigned char, that it can hold the value.
This patch does not change the generated code.
Signed-off-by: Philipp Klocke <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/i2c/cs8427.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/i2c/cs8427.c b/sound/i2c/cs8427.c
index 2647309bc6757..8afa2f8884660 100644
--- a/sound/i2c/cs8427.c
+++ b/sound/i2c/cs8427.c
@@ -118,7 +118,7 @@ static int snd_cs8427_send_corudata(struct snd_i2c_device *device,
struct cs8427 *chip = device->private_data;
char *hw_data = udata ?
chip->playback.hw_udata : chip->playback.hw_status;
- char data[32];
+ unsigned char data[32];
int err, idx;
if (!memcmp(hw_data, ndata, count))
--
2.20.1
From: Vincent Chen <[email protected]>
[ Upstream commit 827a438156e4c423b6875a092e272933952a2910 ]
For 32bit, the upper 32-bit of phys_addr_t will be flushed to zero
after AND with PAGE_MASK because the data type of PAGE_MASK is
unsigned long. To fix this problem, the page alignment is done by
subtracting the page offset instead of AND with PAGE_MASK.
Signed-off-by: Vincent Chen <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/riscv/mm/ioremap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/riscv/mm/ioremap.c b/arch/riscv/mm/ioremap.c
index 70ef2724cdf61..bd2f2db557cc5 100644
--- a/arch/riscv/mm/ioremap.c
+++ b/arch/riscv/mm/ioremap.c
@@ -42,7 +42,7 @@ static void __iomem *__ioremap_caller(phys_addr_t addr, size_t size,
/* Page-align mappings */
offset = addr & (~PAGE_MASK);
- addr &= PAGE_MASK;
+ addr -= offset;
size = PAGE_ALIGN(size + offset);
area = get_vm_area_caller(size, VM_IOREMAP, caller);
--
2.20.1
From: Martin Lau <[email protected]>
[ Upstream commit 4a6998aff82a20a1aece86a186d8e5263f8b2315 ]
Wenwen Wang reported:
In btf_parse(), the header of the user-space btf data 'btf_data'
is firstly parsed and verified through btf_parse_hdr().
In btf_parse_hdr(), the header is copied from user-space 'btf_data'
to kernel-space 'btf->hdr' and then verified. If no error happens
during the verification process, the whole data of 'btf_data',
including the header, is then copied to 'data' in btf_parse(). It
is obvious that the header is copied twice here. More importantly,
no check is enforced after the second copy to make sure the headers
obtained in these two copies are same. Given that 'btf_data' resides
in the user space, a malicious user can race to modify the header
between these two copies. By doing so, the user can inject
inconsistent data, which can cause undefined behavior of the
kernel and introduce potential security risk.
This issue is similar to the one fixed in commit 8af03d1ae2e1 ("bpf:
btf: Fix a missing check bug"). To fix it, this patch copies the user
'btf_data' *before* parsing / verifying the BTF header.
Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)")
Signed-off-by: Martin KaFai Lau <[email protected]>
Co-developed-by: Wenwen Wang <[email protected]>
Acked-by: Song Liu <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/btf.c | 55 ++++++++++++++++++++++--------------------------
1 file changed, 25 insertions(+), 30 deletions(-)
diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c
index 138f0302692ec..ee4c82667d659 100644
--- a/kernel/bpf/btf.c
+++ b/kernel/bpf/btf.c
@@ -2067,50 +2067,44 @@ static int btf_check_sec_info(struct btf_verifier_env *env,
return 0;
}
-static int btf_parse_hdr(struct btf_verifier_env *env, void __user *btf_data,
- u32 btf_data_size)
+static int btf_parse_hdr(struct btf_verifier_env *env)
{
+ u32 hdr_len, hdr_copy, btf_data_size;
const struct btf_header *hdr;
- u32 hdr_len, hdr_copy;
- /*
- * Minimal part of the "struct btf_header" that
- * contains the hdr_len.
- */
- struct btf_min_header {
- u16 magic;
- u8 version;
- u8 flags;
- u32 hdr_len;
- } __user *min_hdr;
struct btf *btf;
int err;
btf = env->btf;
- min_hdr = btf_data;
+ btf_data_size = btf->data_size;
- if (btf_data_size < sizeof(*min_hdr)) {
+ if (btf_data_size <
+ offsetof(struct btf_header, hdr_len) + sizeof(hdr->hdr_len)) {
btf_verifier_log(env, "hdr_len not found");
return -EINVAL;
}
- if (get_user(hdr_len, &min_hdr->hdr_len))
- return -EFAULT;
-
+ hdr = btf->data;
+ hdr_len = hdr->hdr_len;
if (btf_data_size < hdr_len) {
btf_verifier_log(env, "btf_header not found");
return -EINVAL;
}
- err = bpf_check_uarg_tail_zero(btf_data, sizeof(btf->hdr), hdr_len);
- if (err) {
- if (err == -E2BIG)
- btf_verifier_log(env, "Unsupported btf_header");
- return err;
+ /* Ensure the unsupported header fields are zero */
+ if (hdr_len > sizeof(btf->hdr)) {
+ u8 *expected_zero = btf->data + sizeof(btf->hdr);
+ u8 *end = btf->data + hdr_len;
+
+ for (; expected_zero < end; expected_zero++) {
+ if (*expected_zero) {
+ btf_verifier_log(env, "Unsupported btf_header");
+ return -E2BIG;
+ }
+ }
}
hdr_copy = min_t(u32, hdr_len, sizeof(btf->hdr));
- if (copy_from_user(&btf->hdr, btf_data, hdr_copy))
- return -EFAULT;
+ memcpy(&btf->hdr, btf->data, hdr_copy);
hdr = &btf->hdr;
@@ -2183,10 +2177,6 @@ static struct btf *btf_parse(void __user *btf_data, u32 btf_data_size,
}
env->btf = btf;
- err = btf_parse_hdr(env, btf_data, btf_data_size);
- if (err)
- goto errout;
-
data = kvmalloc(btf_data_size, GFP_KERNEL | __GFP_NOWARN);
if (!data) {
err = -ENOMEM;
@@ -2195,13 +2185,18 @@ static struct btf *btf_parse(void __user *btf_data, u32 btf_data_size,
btf->data = data;
btf->data_size = btf_data_size;
- btf->nohdr_data = btf->data + btf->hdr.hdr_len;
if (copy_from_user(data, btf_data, btf_data_size)) {
err = -EFAULT;
goto errout;
}
+ err = btf_parse_hdr(env);
+ if (err)
+ goto errout;
+
+ btf->nohdr_data = btf->data + btf->hdr.hdr_len;
+
err = btf_parse_str_sec(env);
if (err)
goto errout;
--
2.20.1
From: "David S. Miller" <[email protected]>
[ Upstream commit 6c2fc9cddc1ffdef8ada1dc8404e5affae849953 ]
Such as:
fs/ocfs2/file.c: In function ‘ocfs2_file_write_iter’:
./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value]
#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
and
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function ‘ixgbevf_xdp_setup’:
./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value]
#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/sparc/include/asm/cmpxchg_64.h | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/sparc/include/asm/cmpxchg_64.h b/arch/sparc/include/asm/cmpxchg_64.h
index f71ef3729888f..316faa0130bab 100644
--- a/arch/sparc/include/asm/cmpxchg_64.h
+++ b/arch/sparc/include/asm/cmpxchg_64.h
@@ -52,7 +52,12 @@ static inline unsigned long xchg64(__volatile__ unsigned long *m, unsigned long
return val;
}
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+#define xchg(ptr,x) \
+({ __typeof__(*(ptr)) __ret; \
+ __ret = (__typeof__(*(ptr))) \
+ __xchg((unsigned long)(x), (ptr), sizeof(*(ptr))); \
+ __ret; \
+})
void __xchg_called_with_bad_pointer(void);
--
2.20.1
From: Taehee Yoo <[email protected]>
[ Upstream commit f592f804831f1cf9d1f9966f58c80f150e6829b5 ]
The dev_map_notification() removes interface in devmap if
unregistering interface's ifindex is same.
But only checking ifindex is not enough because other netns can have
same ifindex. so that wrong interface selection could occurred.
Hence netdev pointer comparison code is added.
v2: compare netdev pointer instead of using net_eq() (Daniel Borkmann)
v1: Initial patch
Fixes: 2ddf71e23cc2 ("net: add notifier hooks for devmap bpf map")
Signed-off-by: Taehee Yoo <[email protected]>
Acked-by: Song Liu <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/devmap.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/kernel/bpf/devmap.c b/kernel/bpf/devmap.c
index fc500ca464d00..1defea4b27553 100644
--- a/kernel/bpf/devmap.c
+++ b/kernel/bpf/devmap.c
@@ -520,8 +520,7 @@ static int dev_map_notification(struct notifier_block *notifier,
struct bpf_dtab_netdev *dev, *odev;
dev = READ_ONCE(dtab->netdev_map[i]);
- if (!dev ||
- dev->dev->ifindex != netdev->ifindex)
+ if (!dev || netdev != dev->dev)
continue;
odev = cmpxchg(&dtab->netdev_map[i], dev, NULL);
if (dev == odev)
--
2.20.1
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 3a31386217628ffe2491695be2db933c25dde785 ]
On r8a7791/koelsch, sometimes the following message is printed during
system suspend:
rcar_thermal e61f0000.thermal: thermal sensor was broken
This happens if the workqueue runs while the device is already
suspended. Fix this by using the freezable system workqueue instead,
cfr. commit 51e20d0e3a60cf46 ("thermal: Prevent polling from happening
during system suspend").
Fixes: e0a5172e9eec7f0d ("thermal: rcar: add interrupt support")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Niklas Söderlund <[email protected]>
Signed-off-by: Eduardo Valentin <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/thermal/rcar_thermal.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index edaa4058686b7..4dc30e7890f6c 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -434,8 +434,8 @@ static irqreturn_t rcar_thermal_irq(int irq, void *data)
rcar_thermal_for_each_priv(priv, common) {
if (rcar_thermal_had_changed(priv, status)) {
rcar_thermal_irq_disable(priv);
- schedule_delayed_work(&priv->work,
- msecs_to_jiffies(300));
+ queue_delayed_work(system_freezable_wq, &priv->work,
+ msecs_to_jiffies(300));
}
}
--
2.20.1
From: Andrey Ryabinin <[email protected]>
[ Upstream commit 19a2ca0fb560fd7be7b5293c6b652c6d6078dcde ]
ARM64 has asm implementation of memchr(), memcmp(), str[r]chr(),
str[n]cmp(), str[n]len(). KASAN don't see memory accesses in asm code,
thus it can potentially miss many bugs.
Ifdef out __HAVE_ARCH_* defines of these functions when KASAN is enabled,
so the generic implementations from lib/string.c will be used.
We can't just remove the asm functions because efistub uses them. And we
can't have two non-weak functions either, so declare the asm functions as
weak.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Andrey Ryabinin <[email protected]>
Reported-by: Kyeongdon Kim <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Mark Rutland <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/include/asm/string.h | 14 ++++++++------
arch/arm64/kernel/arm64ksyms.c | 7 +++++--
arch/arm64/lib/memchr.S | 2 +-
arch/arm64/lib/memcmp.S | 2 +-
arch/arm64/lib/strchr.S | 2 +-
arch/arm64/lib/strcmp.S | 2 +-
arch/arm64/lib/strlen.S | 2 +-
arch/arm64/lib/strncmp.S | 2 +-
arch/arm64/lib/strnlen.S | 2 +-
arch/arm64/lib/strrchr.S | 2 +-
10 files changed, 21 insertions(+), 16 deletions(-)
diff --git a/arch/arm64/include/asm/string.h b/arch/arm64/include/asm/string.h
index dd95d33a5bd5d..03a6c256b7ec4 100644
--- a/arch/arm64/include/asm/string.h
+++ b/arch/arm64/include/asm/string.h
@@ -16,6 +16,7 @@
#ifndef __ASM_STRING_H
#define __ASM_STRING_H
+#ifndef CONFIG_KASAN
#define __HAVE_ARCH_STRRCHR
extern char *strrchr(const char *, int c);
@@ -34,6 +35,13 @@ extern __kernel_size_t strlen(const char *);
#define __HAVE_ARCH_STRNLEN
extern __kernel_size_t strnlen(const char *, __kernel_size_t);
+#define __HAVE_ARCH_MEMCMP
+extern int memcmp(const void *, const void *, size_t);
+
+#define __HAVE_ARCH_MEMCHR
+extern void *memchr(const void *, int, __kernel_size_t);
+#endif
+
#define __HAVE_ARCH_MEMCPY
extern void *memcpy(void *, const void *, __kernel_size_t);
extern void *__memcpy(void *, const void *, __kernel_size_t);
@@ -42,16 +50,10 @@ extern void *__memcpy(void *, const void *, __kernel_size_t);
extern void *memmove(void *, const void *, __kernel_size_t);
extern void *__memmove(void *, const void *, __kernel_size_t);
-#define __HAVE_ARCH_MEMCHR
-extern void *memchr(const void *, int, __kernel_size_t);
-
#define __HAVE_ARCH_MEMSET
extern void *memset(void *, int, __kernel_size_t);
extern void *__memset(void *, int, __kernel_size_t);
-#define __HAVE_ARCH_MEMCMP
-extern int memcmp(const void *, const void *, size_t);
-
#ifdef CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE
#define __HAVE_ARCH_MEMCPY_FLUSHCACHE
void memcpy_flushcache(void *dst, const void *src, size_t cnt);
diff --git a/arch/arm64/kernel/arm64ksyms.c b/arch/arm64/kernel/arm64ksyms.c
index d894a20b70b28..72f63a59b0088 100644
--- a/arch/arm64/kernel/arm64ksyms.c
+++ b/arch/arm64/kernel/arm64ksyms.c
@@ -44,20 +44,23 @@ EXPORT_SYMBOL(__arch_copy_in_user);
EXPORT_SYMBOL(memstart_addr);
/* string / mem functions */
+#ifndef CONFIG_KASAN
EXPORT_SYMBOL(strchr);
EXPORT_SYMBOL(strrchr);
EXPORT_SYMBOL(strcmp);
EXPORT_SYMBOL(strncmp);
EXPORT_SYMBOL(strlen);
EXPORT_SYMBOL(strnlen);
+EXPORT_SYMBOL(memcmp);
+EXPORT_SYMBOL(memchr);
+#endif
+
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(__memset);
EXPORT_SYMBOL(__memcpy);
EXPORT_SYMBOL(__memmove);
-EXPORT_SYMBOL(memchr);
-EXPORT_SYMBOL(memcmp);
/* atomic bitops */
EXPORT_SYMBOL(set_bit);
diff --git a/arch/arm64/lib/memchr.S b/arch/arm64/lib/memchr.S
index 4444c1d25f4bb..0f164a4baf52a 100644
--- a/arch/arm64/lib/memchr.S
+++ b/arch/arm64/lib/memchr.S
@@ -30,7 +30,7 @@
* Returns:
* x0 - address of first occurrence of 'c' or 0
*/
-ENTRY(memchr)
+WEAK(memchr)
and w1, w1, #0xff
1: subs x2, x2, #1
b.mi 2f
diff --git a/arch/arm64/lib/memcmp.S b/arch/arm64/lib/memcmp.S
index 2a4e239bd17a0..fb295f52e9f87 100644
--- a/arch/arm64/lib/memcmp.S
+++ b/arch/arm64/lib/memcmp.S
@@ -58,7 +58,7 @@ pos .req x11
limit_wd .req x12
mask .req x13
-ENTRY(memcmp)
+WEAK(memcmp)
cbz limit, .Lret0
eor tmp1, src1, src2
tst tmp1, #7
diff --git a/arch/arm64/lib/strchr.S b/arch/arm64/lib/strchr.S
index dae0cf5591f99..7c83091d1bcdd 100644
--- a/arch/arm64/lib/strchr.S
+++ b/arch/arm64/lib/strchr.S
@@ -29,7 +29,7 @@
* Returns:
* x0 - address of first occurrence of 'c' or 0
*/
-ENTRY(strchr)
+WEAK(strchr)
and w1, w1, #0xff
1: ldrb w2, [x0], #1
cmp w2, w1
diff --git a/arch/arm64/lib/strcmp.S b/arch/arm64/lib/strcmp.S
index 471fe61760ef6..7d5d15398bfbc 100644
--- a/arch/arm64/lib/strcmp.S
+++ b/arch/arm64/lib/strcmp.S
@@ -60,7 +60,7 @@ tmp3 .req x9
zeroones .req x10
pos .req x11
-ENTRY(strcmp)
+WEAK(strcmp)
eor tmp1, src1, src2
mov zeroones, #REP8_01
tst tmp1, #7
diff --git a/arch/arm64/lib/strlen.S b/arch/arm64/lib/strlen.S
index 55ccc8e24c084..8e0b14205dcb4 100644
--- a/arch/arm64/lib/strlen.S
+++ b/arch/arm64/lib/strlen.S
@@ -56,7 +56,7 @@ pos .req x12
#define REP8_7f 0x7f7f7f7f7f7f7f7f
#define REP8_80 0x8080808080808080
-ENTRY(strlen)
+WEAK(strlen)
mov zeroones, #REP8_01
bic src, srcin, #15
ands tmp1, srcin, #15
diff --git a/arch/arm64/lib/strncmp.S b/arch/arm64/lib/strncmp.S
index e267044761c6f..66bd145935d9e 100644
--- a/arch/arm64/lib/strncmp.S
+++ b/arch/arm64/lib/strncmp.S
@@ -64,7 +64,7 @@ limit_wd .req x13
mask .req x14
endloop .req x15
-ENTRY(strncmp)
+WEAK(strncmp)
cbz limit, .Lret0
eor tmp1, src1, src2
mov zeroones, #REP8_01
diff --git a/arch/arm64/lib/strnlen.S b/arch/arm64/lib/strnlen.S
index eae38da6e0bb3..355be04441fe6 100644
--- a/arch/arm64/lib/strnlen.S
+++ b/arch/arm64/lib/strnlen.S
@@ -59,7 +59,7 @@ limit_wd .req x14
#define REP8_7f 0x7f7f7f7f7f7f7f7f
#define REP8_80 0x8080808080808080
-ENTRY(strnlen)
+WEAK(strnlen)
cbz limit, .Lhit_limit
mov zeroones, #REP8_01
bic src, srcin, #15
diff --git a/arch/arm64/lib/strrchr.S b/arch/arm64/lib/strrchr.S
index f8e2784d57521..ea84924d59901 100644
--- a/arch/arm64/lib/strrchr.S
+++ b/arch/arm64/lib/strrchr.S
@@ -29,7 +29,7 @@
* Returns:
* x0 - address of last occurrence of 'c' or 0
*/
-ENTRY(strrchr)
+WEAK(strrchr)
mov x3, #0
and w1, w1, #0xff
1: ldrb w2, [x0], #1
--
2.20.1
From: Jia-Ju Bai <[email protected]>
[ Upstream commit 999865764f5f128896402572b439269acb471022 ]
The kernel module may sleep with holding a spinlock.
The function call paths (from bottom to top) in Linux-4.16 are:
[FUNC] get_zeroed_page(GFP_NOFS)
fs/ocfs2/dlm/dlmdebug.c, 332: get_zeroed_page in dlm_print_one_mle
fs/ocfs2/dlm/dlmmaster.c, 240: dlm_print_one_mle in __dlm_put_mle
fs/ocfs2/dlm/dlmmaster.c, 255: __dlm_put_mle in dlm_put_mle
fs/ocfs2/dlm/dlmmaster.c, 254: spin_lock in dlm_put_ml
[FUNC] get_zeroed_page(GFP_NOFS)
fs/ocfs2/dlm/dlmdebug.c, 332: get_zeroed_page in dlm_print_one_mle
fs/ocfs2/dlm/dlmmaster.c, 240: dlm_print_one_mle in __dlm_put_mle
fs/ocfs2/dlm/dlmmaster.c, 222: __dlm_put_mle in dlm_put_mle_inuse
fs/ocfs2/dlm/dlmmaster.c, 219: spin_lock in dlm_put_mle_inuse
To fix this bug, GFP_NOFS is replaced with GFP_ATOMIC.
This bug is found by my static analysis tool DSAC.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jia-Ju Bai <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Changwei Ge <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ocfs2/dlm/dlmdebug.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/ocfs2/dlm/dlmdebug.c b/fs/ocfs2/dlm/dlmdebug.c
index 9b984cae4c4e0..1d6dc8422899b 100644
--- a/fs/ocfs2/dlm/dlmdebug.c
+++ b/fs/ocfs2/dlm/dlmdebug.c
@@ -329,7 +329,7 @@ void dlm_print_one_mle(struct dlm_master_list_entry *mle)
{
char *buf;
- buf = (char *) get_zeroed_page(GFP_NOFS);
+ buf = (char *) get_zeroed_page(GFP_ATOMIC);
if (buf) {
dump_mle(mle, buf, PAGE_SIZE - 1);
free_page((unsigned long)buf);
--
2.20.1
From: Andrea Parri <[email protected]>
[ Upstream commit fb363e2d20351e1d16629df19e7bce1a31b3227a ]
Fixes the following warnings:
dirty_log_test.c: In function ‘help’:
dirty_log_test.c:216:9: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘int’ [-Wformat=]
printf(" -i: specify iteration counts (default: %"PRIu64")\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from include/test_util.h:18:0,
from dirty_log_test.c:16:
/usr/include/inttypes.h:105:34: note: format string is defined here
# define PRIu64 __PRI64_PREFIX "u"
dirty_log_test.c:218:9: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘int’ [-Wformat=]
printf(" -I: specify interval in ms (default: %"PRIu64" ms)\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from include/test_util.h:18:0,
from dirty_log_test.c:16:
/usr/include/inttypes.h:105:34: note: format string is defined here
# define PRIu64 __PRI64_PREFIX "u"
Signed-off-by: Andrea Parri <[email protected]>
Signed-off-by: Shuah Khan (Samsung OSG) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/kvm/dirty_log_test.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/kvm/dirty_log_test.c b/tools/testing/selftests/kvm/dirty_log_test.c
index 0c2cdc105f968..a9c4b5e21d7e7 100644
--- a/tools/testing/selftests/kvm/dirty_log_test.c
+++ b/tools/testing/selftests/kvm/dirty_log_test.c
@@ -31,9 +31,9 @@
/* How many pages to dirty for each guest loop */
#define TEST_PAGES_PER_LOOP 1024
/* How many host loops to run (one KVM_GET_DIRTY_LOG for each loop) */
-#define TEST_HOST_LOOP_N 32
+#define TEST_HOST_LOOP_N 32UL
/* Interval for each host loop (ms) */
-#define TEST_HOST_LOOP_INTERVAL 10
+#define TEST_HOST_LOOP_INTERVAL 10UL
/*
* Guest variables. We use these variables to share data between host
--
2.20.1
From: Alexandre Belloni <[email protected]>
[ Upstream commit 7fa75007b7d7421aea59ff2b12ab1bd65a5abfa6 ]
The allocation for the audio pmc is using the size of struct clk_audio_pad
instead of struct clk_audio_pmc. This works fine because the former is
larger than the latter but it is safer to be correct.
Fixes: ("0865805d82d4 clk: at91: add audio pll clock drivers")
Signed-off-by: Alexandre Belloni <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/at91/clk-audio-pll.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/at91/clk-audio-pll.c b/drivers/clk/at91/clk-audio-pll.c
index da7bafcfbe706..b3eaf654fac98 100644
--- a/drivers/clk/at91/clk-audio-pll.c
+++ b/drivers/clk/at91/clk-audio-pll.c
@@ -509,7 +509,7 @@ static void __init of_sama5d2_clk_audio_pll_pad_setup(struct device_node *np)
static void __init of_sama5d2_clk_audio_pll_pmc_setup(struct device_node *np)
{
- struct clk_audio_pad *apmc_ck;
+ struct clk_audio_pmc *apmc_ck;
struct clk_init_data init = {};
apmc_ck = kzalloc(sizeof(*apmc_ck), GFP_KERNEL);
--
2.20.1
From: Andrea Arcangeli <[email protected]>
[ Upstream commit d7c3393413fe7e7dc54498ea200ea94742d61e18 ]
Patch series "migrate_misplaced_transhuge_page race conditions".
Aaron found a new instance of the THP MADV_DONTNEED race against
pmdp_clear_flush* variants, that was apparently left unfixed.
While looking into the race found by Aaron, I may have found two more
issues in migrate_misplaced_transhuge_page.
These race conditions would not cause kernel instability, but they'd
corrupt userland data or leave data non zero after MADV_DONTNEED.
I did only minor testing, and I don't expect to be able to reproduce this
(especially the lack of ->invalidate_range before migrate_page_copy,
requires the latest iommu hardware or infiniband to reproduce). The last
patch is noop for x86 and it needs further review from maintainers of
archs that implement flush_cache_range() (not in CC yet).
To avoid confusion, it's not the first patch that introduces the bug fixed
in the second patch, even before removing the
pmdp_huge_clear_flush_notify, that _notify suffix was called after
migrate_page_copy already run.
This patch (of 3):
This is a corollary of ced108037c2aa ("thp: fix MADV_DONTNEED vs. numa
balancing race"), 58ceeb6bec8 ("thp: fix MADV_DONTNEED vs. MADV_FREE
race") and 5b7abeae3af8c ("thp: fix MADV_DONTNEED vs clear soft dirty
race).
When the above three fixes where posted Dave asked
https://lkml.kernel.org/r/[email protected]
but apparently this was missed.
The pmdp_clear_flush* in migrate_misplaced_transhuge_page() was introduced
in a54a407fbf7 ("mm: Close races between THP migration and PMD numa
clearing").
The important part of such commit is only the part where the page lock is
not released until the first do_huge_pmd_numa_page() finished disarming
the pagenuma/protnone.
The addition of pmdp_clear_flush() wasn't beneficial to such commit and
there's no commentary about such an addition either.
I guess the pmdp_clear_flush() in such commit was added just in case for
safety, but it ended up introducing the MADV_DONTNEED race condition found
by Aaron.
At that point in time nobody thought of such kind of MADV_DONTNEED race
conditions yet (they were fixed later) so the code may have looked more
robust by adding the pmdp_clear_flush().
This specific race condition won't destabilize the kernel, but it can
confuse userland because after MADV_DONTNEED the memory won't be zeroed
out.
This also optimizes the code and removes a superfluous TLB flush.
[[email protected]: reflow comment to 80 cols, fix grammar and typo (beacuse)]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Andrea Arcangeli <[email protected]>
Reported-by: Aaron Tomlin <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Cc: Jerome Glisse <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/migrate.c | 25 ++++++++++++++++++-------
1 file changed, 18 insertions(+), 7 deletions(-)
diff --git a/mm/migrate.c b/mm/migrate.c
index 0c48191a90368..4d3588c012034 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -2048,15 +2048,26 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm,
entry = maybe_pmd_mkwrite(pmd_mkdirty(entry), vma);
/*
- * Clear the old entry under pagetable lock and establish the new PTE.
- * Any parallel GUP will either observe the old page blocking on the
- * page lock, block on the page table lock or observe the new page.
- * The SetPageUptodate on the new page and page_add_new_anon_rmap
- * guarantee the copy is visible before the pagetable update.
+ * Overwrite the old entry under pagetable lock and establish
+ * the new PTE. Any parallel GUP will either observe the old
+ * page blocking on the page lock, block on the page table
+ * lock or observe the new page. The SetPageUptodate on the
+ * new page and page_add_new_anon_rmap guarantee the copy is
+ * visible before the pagetable update.
*/
flush_cache_range(vma, mmun_start, mmun_end);
page_add_anon_rmap(new_page, vma, mmun_start, true);
- pmdp_huge_clear_flush_notify(vma, mmun_start, pmd);
+ /*
+ * At this point the pmd is numa/protnone (i.e. non present) and the TLB
+ * has already been flushed globally. So no TLB can be currently
+ * caching this non present pmd mapping. There's no need to clear the
+ * pmd before doing set_pmd_at(), nor to flush the TLB after
+ * set_pmd_at(). Clearing the pmd here would introduce a race
+ * condition against MADV_DONTNEED, because MADV_DONTNEED only holds the
+ * mmap_sem for reading. If the pmd is set to NULL at any given time,
+ * MADV_DONTNEED won't wait on the pmd lock and it'll skip clearing this
+ * pmd.
+ */
set_pmd_at(mm, mmun_start, pmd, entry);
update_mmu_cache_pmd(vma, address, &entry);
@@ -2070,7 +2081,7 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm,
* No need to double call mmu_notifier->invalidate_range() callback as
* the above pmdp_huge_clear_flush_notify() did already call it.
*/
- mmu_notifier_invalidate_range_only_end(mm, mmun_start, mmun_end);
+ mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);
/* Take an "isolate" reference and put new page on the LRU. */
get_page(new_page);
--
2.20.1
From: Sabrina Dubroca <[email protected]>
[ Upstream commit 07bddef9839378bd6f95b393cf24c420529b4ef1 ]
Currently, the kernel doesn't let the administrator set a macsec device
up unless its lower device is currently up. This is inconsistent, as a
macsec device that is up won't automatically go down when its lower
device goes down.
Now that linkstate propagation works, there's really no reason for this
limitation, so let's remove it.
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Reported-by: Radu Rendec <[email protected]>
Signed-off-by: Sabrina Dubroca <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/macsec.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
index 50acd8c9d7f53..10a8ef2d025a1 100644
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -2813,9 +2813,6 @@ static int macsec_dev_open(struct net_device *dev)
struct net_device *real_dev = macsec->real_dev;
int err;
- if (!(real_dev->flags & IFF_UP))
- return -ENETDOWN;
-
err = dev_uc_add(real_dev, dev->dev_addr);
if (err < 0)
return err;
--
2.20.1
From: Masahiro Yamada <[email protected]>
[ Upstream commit f1fdcbbdf45d9609f3d4063b67e9ea941ba3a58f ]
This is unlikely to happen, but it is possible for a CPU to enter
the interrupt handler just after wait_for_completion_timeout() has
expired. If this happens, the hardware is accessed from multiple
contexts concurrently.
Disable the IRQ after wait_for_completion_timeout(), and do nothing
from the handler when the IRQ is disabled.
Fixes: 6a62974b667f ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver")
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-uniphier-f.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c
index bc26ec822e268..b9a0690b4fd73 100644
--- a/drivers/i2c/busses/i2c-uniphier-f.c
+++ b/drivers/i2c/busses/i2c-uniphier-f.c
@@ -98,6 +98,7 @@ struct uniphier_fi2c_priv {
unsigned int flags;
unsigned int busy_cnt;
unsigned int clk_cycle;
+ spinlock_t lock; /* IRQ synchronization */
};
static void uniphier_fi2c_fill_txfifo(struct uniphier_fi2c_priv *priv,
@@ -162,7 +163,10 @@ static irqreturn_t uniphier_fi2c_interrupt(int irq, void *dev_id)
struct uniphier_fi2c_priv *priv = dev_id;
u32 irq_status;
+ spin_lock(&priv->lock);
+
irq_status = readl(priv->membase + UNIPHIER_FI2C_INT);
+ irq_status &= priv->enabled_irqs;
dev_dbg(&priv->adap.dev,
"interrupt: enabled_irqs=%04x, irq_status=%04x\n",
@@ -230,6 +234,8 @@ static irqreturn_t uniphier_fi2c_interrupt(int irq, void *dev_id)
goto handled;
}
+ spin_unlock(&priv->lock);
+
return IRQ_NONE;
data_done:
@@ -246,6 +252,8 @@ static irqreturn_t uniphier_fi2c_interrupt(int irq, void *dev_id)
handled:
uniphier_fi2c_clear_irqs(priv);
+ spin_unlock(&priv->lock);
+
return IRQ_HANDLED;
}
@@ -311,7 +319,7 @@ static int uniphier_fi2c_master_xfer_one(struct i2c_adapter *adap,
{
struct uniphier_fi2c_priv *priv = i2c_get_adapdata(adap);
bool is_read = msg->flags & I2C_M_RD;
- unsigned long time_left;
+ unsigned long time_left, flags;
dev_dbg(&adap->dev, "%s: addr=0x%02x, len=%d, stop=%d\n",
is_read ? "receive" : "transmit", msg->addr, msg->len, stop);
@@ -342,6 +350,12 @@ static int uniphier_fi2c_master_xfer_one(struct i2c_adapter *adap,
priv->membase + UNIPHIER_FI2C_CR);
time_left = wait_for_completion_timeout(&priv->comp, adap->timeout);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->enabled_irqs = 0;
+ uniphier_fi2c_set_irqs(priv);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
if (!time_left) {
dev_err(&adap->dev, "transaction timeout.\n");
uniphier_fi2c_recover(priv);
@@ -546,6 +560,7 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
priv->clk_cycle = clk_rate / bus_speed;
init_completion(&priv->comp);
+ spin_lock_init(&priv->lock);
priv->adap.owner = THIS_MODULE;
priv->adap.algo = &uniphier_fi2c_algo;
priv->adap.dev.parent = dev;
--
2.20.1
From: Christoph Hellwig <[email protected]>
[ Upstream commit 8088546832aa2c0d8f99dd56edf6384f8a9b63b3 ]
All properly written drivers now have error handling in the
dma_map_single / dma_map_page callers. As swiotlb_tbl_map_single already
prints a useful warning when running out of swiotlb pool space we can
also remove swiotlb_full entirely as it serves no purpose now.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/dma/swiotlb.c | 33 +--------------------------------
1 file changed, 1 insertion(+), 32 deletions(-)
diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c
index 4f8a6dbf0b609..2a8c41f12d450 100644
--- a/kernel/dma/swiotlb.c
+++ b/kernel/dma/swiotlb.c
@@ -761,34 +761,6 @@ static bool swiotlb_free_buffer(struct device *dev, size_t size,
return true;
}
-static void
-swiotlb_full(struct device *dev, size_t size, enum dma_data_direction dir,
- int do_panic)
-{
- if (swiotlb_force == SWIOTLB_NO_FORCE)
- return;
-
- /*
- * Ran out of IOMMU space for this operation. This is very bad.
- * Unfortunately the drivers cannot handle this operation properly.
- * unless they check for dma_mapping_error (most don't)
- * When the mapping is small enough return a static buffer to limit
- * the damage, or panic when the transfer is too big.
- */
- dev_err_ratelimited(dev, "DMA: Out of SW-IOMMU space for %zu bytes\n",
- size);
-
- if (size <= io_tlb_overflow || !do_panic)
- return;
-
- if (dir == DMA_BIDIRECTIONAL)
- panic("DMA: Random memory could be DMA accessed\n");
- if (dir == DMA_FROM_DEVICE)
- panic("DMA: Random memory could be DMA written\n");
- if (dir == DMA_TO_DEVICE)
- panic("DMA: Random memory could be DMA read\n");
-}
-
/*
* Map a single buffer of the indicated size for DMA in streaming mode. The
* physical address to use is returned.
@@ -817,10 +789,8 @@ dma_addr_t swiotlb_map_page(struct device *dev, struct page *page,
/* Oh well, have to allocate and map a bounce buffer. */
map = map_single(dev, phys, size, dir, attrs);
- if (map == SWIOTLB_MAP_ERROR) {
- swiotlb_full(dev, size, dir, 1);
+ if (map == SWIOTLB_MAP_ERROR)
return __phys_to_dma(dev, io_tlb_overflow_buffer);
- }
dev_addr = __phys_to_dma(dev, map);
@@ -954,7 +924,6 @@ swiotlb_map_sg_attrs(struct device *hwdev, struct scatterlist *sgl, int nelems,
if (map == SWIOTLB_MAP_ERROR) {
/* Don't panic here, we expect map_sg users
to do proper error handling. */
- swiotlb_full(hwdev, sg->length, dir, 0);
attrs |= DMA_ATTR_SKIP_CPU_SYNC;
swiotlb_unmap_sg_attrs(hwdev, sgl, i, dir,
attrs);
--
2.20.1
From: Michael Ellerman <[email protected]>
[ Upstream commit 69f8117f17b332a68cd8f4bf8c2d0d3d5b84efc5 ]
Use TEST_GEN_PROGS and don't redefine all, this makes the out-of-tree
build work. We need to move the extra dependencies below the include
of lib.mk, because it adds the $(OUTPUT) prefix if it's defined.
We can also drop the clean rule, lib.mk does it for us.
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/powerpc/cache_shape/Makefile | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/tools/testing/selftests/powerpc/cache_shape/Makefile b/tools/testing/selftests/powerpc/cache_shape/Makefile
index ede4d3dae7505..689f6c8ebcd8d 100644
--- a/tools/testing/selftests/powerpc/cache_shape/Makefile
+++ b/tools/testing/selftests/powerpc/cache_shape/Makefile
@@ -1,12 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
-TEST_PROGS := cache_shape
-
-all: $(TEST_PROGS)
-
-$(TEST_PROGS): ../harness.c ../utils.c
+TEST_GEN_PROGS := cache_shape
top_srcdir = ../../../../..
include ../../lib.mk
-clean:
- rm -f $(TEST_PROGS) *.o
+$(TEST_GEN_PROGS): ../harness.c ../utils.c
--
2.20.1
From: Rasmus Villemoes <[email protected]>
[ Upstream commit ce1091d471107dbf6f91db66a480a25950c9b9ff ]
For various alignments of buf, the current expression computes
4096 ok
4095 ok
8190
8189
...
4097
i.e., if the caller has already written two bytes into the page buffer,
len is 8190 rather than 4094, because PTR_ALIGN aligns up to the next
boundary. So if the printed version of the bitmap is huge, scnprintf()
ends up writing beyond the page boundary.
I don't think any current callers actually write anything before
bitmap_print_to_pagebuf, but the API seems to be designed to allow it.
[[email protected]: use offset_in_page(), per Andy]
[[email protected]: include mm.h for offset_in_page()]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Rasmus Villemoes <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Cc: Yury Norov <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Cc: Sudeep Holla <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/bitmap.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 2fd07f6df0b85..c4ca9ceb09fe3 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -13,6 +13,7 @@
#include <linux/bitops.h>
#include <linux/bug.h>
#include <linux/kernel.h>
+#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/uaccess.h>
@@ -466,14 +467,15 @@ EXPORT_SYMBOL(bitmap_parse_user);
* ranges if list is specified or hex digits grouped into comma-separated
* sets of 8 digits/set. Returns the number of characters written to buf.
*
- * It is assumed that @buf is a pointer into a PAGE_SIZE area and that
- * sufficient storage remains at @buf to accommodate the
- * bitmap_print_to_pagebuf() output.
+ * It is assumed that @buf is a pointer into a PAGE_SIZE, page-aligned
+ * area and that sufficient storage remains at @buf to accommodate the
+ * bitmap_print_to_pagebuf() output. Returns the number of characters
+ * actually printed to @buf, excluding terminating '\0'.
*/
int bitmap_print_to_pagebuf(bool list, char *buf, const unsigned long *maskp,
int nmaskbits)
{
- ptrdiff_t len = PTR_ALIGN(buf + PAGE_SIZE - 1, PAGE_SIZE) - buf;
+ ptrdiff_t len = PAGE_SIZE - offset_in_page(buf);
int n = 0;
if (len > 1)
--
2.20.1
From: Ernesto A. Fernández <[email protected]>
[ Upstream commit 19a9d0f1acf75e8be8cfba19c1a34e941846fa2b ]
Creating, renaming or deleting a file may hit BUG_ON() if the first
record of both a leaf node and its parent are changed, and if this
forces the parent to be split. This bug is triggered by xfstests
generic/027, somewhat rarely; here is a more reliable reproducer:
truncate -s 50M fs.iso
mkfs.hfsplus fs.iso
mount fs.iso /mnt
i=1000
while [ $i -le 2400 ]; do
touch /mnt/$i &>/dev/null
((++i))
done
i=2400
while [ $i -ge 1000 ]; do
mv /mnt/$i /mnt/$(perl -e "print $i x61") &>/dev/null
((--i))
done
The issue is that a newly created bnode is being put twice. Reset
new_node to NULL in hfs_brec_update_parent() before reaching goto again.
Link: http://lkml.kernel.org/r/5ee1db09b60373a15890f6a7c835d00e76bf601d.1535682461.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/hfsplus/brec.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/hfsplus/brec.c b/fs/hfsplus/brec.c
index aa17a392b4140..1918544a78716 100644
--- a/fs/hfsplus/brec.c
+++ b/fs/hfsplus/brec.c
@@ -449,6 +449,7 @@ static int hfs_brec_update_parent(struct hfs_find_data *fd)
/* restore search_key */
hfs_bnode_read_key(node, fd->search_key, 14);
}
+ new_node = NULL;
}
if (!rec && node->parent)
--
2.20.1
From: Andy Shevchenko <[email protected]>
[ Upstream commit 9f8ddee1dab836ca758ca8fc555ab5a3aaa5d3fd ]
Power button IRQ actually has a second level of interrupts to
distinguish between UI and POWER buttons. Moreover, current
implementation looks awkward in approach to handle second level IRQs by
first level related IRQ chip.
To address above issues, split power button IRQ to be chained as well.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Mika Westerberg <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/intel_soc_pmic_bxtwc.c | 41 ++++++++++++++++++++++--------
include/linux/mfd/intel_soc_pmic.h | 1 +
2 files changed, 32 insertions(+), 10 deletions(-)
diff --git a/drivers/mfd/intel_soc_pmic_bxtwc.c b/drivers/mfd/intel_soc_pmic_bxtwc.c
index 15bc052704a6d..9ca1f8c015de9 100644
--- a/drivers/mfd/intel_soc_pmic_bxtwc.c
+++ b/drivers/mfd/intel_soc_pmic_bxtwc.c
@@ -31,8 +31,8 @@
/* Interrupt Status Registers */
#define BXTWC_IRQLVL1 0x4E02
-#define BXTWC_PWRBTNIRQ 0x4E03
+#define BXTWC_PWRBTNIRQ 0x4E03
#define BXTWC_THRM0IRQ 0x4E04
#define BXTWC_THRM1IRQ 0x4E05
#define BXTWC_THRM2IRQ 0x4E06
@@ -47,10 +47,9 @@
/* Interrupt MASK Registers */
#define BXTWC_MIRQLVL1 0x4E0E
-#define BXTWC_MPWRTNIRQ 0x4E0F
-
#define BXTWC_MIRQLVL1_MCHGR BIT(5)
+#define BXTWC_MPWRBTNIRQ 0x4E0F
#define BXTWC_MTHRM0IRQ 0x4E12
#define BXTWC_MTHRM1IRQ 0x4E13
#define BXTWC_MTHRM2IRQ 0x4E14
@@ -66,9 +65,7 @@
/* Whiskey Cove PMIC share same ACPI ID between different platforms */
#define BROXTON_PMIC_WC_HRV 4
-/* Manage in two IRQ chips since mask registers are not consecutive */
enum bxtwc_irqs {
- /* Level 1 */
BXTWC_PWRBTN_LVL1_IRQ = 0,
BXTWC_TMU_LVL1_IRQ,
BXTWC_THRM_LVL1_IRQ,
@@ -77,9 +74,11 @@ enum bxtwc_irqs {
BXTWC_CHGR_LVL1_IRQ,
BXTWC_GPIO_LVL1_IRQ,
BXTWC_CRIT_LVL1_IRQ,
+};
- /* Level 2 */
- BXTWC_PWRBTN_IRQ,
+enum bxtwc_irqs_pwrbtn {
+ BXTWC_PWRBTN_IRQ = 0,
+ BXTWC_UIBTN_IRQ,
};
enum bxtwc_irqs_bcu {
@@ -113,7 +112,10 @@ static const struct regmap_irq bxtwc_regmap_irqs[] = {
REGMAP_IRQ_REG(BXTWC_CHGR_LVL1_IRQ, 0, BIT(5)),
REGMAP_IRQ_REG(BXTWC_GPIO_LVL1_IRQ, 0, BIT(6)),
REGMAP_IRQ_REG(BXTWC_CRIT_LVL1_IRQ, 0, BIT(7)),
- REGMAP_IRQ_REG(BXTWC_PWRBTN_IRQ, 1, 0x03),
+};
+
+static const struct regmap_irq bxtwc_regmap_irqs_pwrbtn[] = {
+ REGMAP_IRQ_REG(BXTWC_PWRBTN_IRQ, 0, 0x01),
};
static const struct regmap_irq bxtwc_regmap_irqs_bcu[] = {
@@ -125,7 +127,7 @@ static const struct regmap_irq bxtwc_regmap_irqs_adc[] = {
};
static const struct regmap_irq bxtwc_regmap_irqs_chgr[] = {
- REGMAP_IRQ_REG(BXTWC_USBC_IRQ, 0, BIT(5)),
+ REGMAP_IRQ_REG(BXTWC_USBC_IRQ, 0, 0x20),
REGMAP_IRQ_REG(BXTWC_CHGR0_IRQ, 0, 0x1f),
REGMAP_IRQ_REG(BXTWC_CHGR1_IRQ, 1, 0x1f),
};
@@ -144,7 +146,16 @@ static struct regmap_irq_chip bxtwc_regmap_irq_chip = {
.mask_base = BXTWC_MIRQLVL1,
.irqs = bxtwc_regmap_irqs,
.num_irqs = ARRAY_SIZE(bxtwc_regmap_irqs),
- .num_regs = 2,
+ .num_regs = 1,
+};
+
+static struct regmap_irq_chip bxtwc_regmap_irq_chip_pwrbtn = {
+ .name = "bxtwc_irq_chip_pwrbtn",
+ .status_base = BXTWC_PWRBTNIRQ,
+ .mask_base = BXTWC_MPWRBTNIRQ,
+ .irqs = bxtwc_regmap_irqs_pwrbtn,
+ .num_irqs = ARRAY_SIZE(bxtwc_regmap_irqs_pwrbtn),
+ .num_regs = 1,
};
static struct regmap_irq_chip bxtwc_regmap_irq_chip_tmu = {
@@ -472,6 +483,16 @@ static int bxtwc_probe(struct platform_device *pdev)
return ret;
}
+ ret = bxtwc_add_chained_irq_chip(pmic, pmic->irq_chip_data,
+ BXTWC_PWRBTN_LVL1_IRQ,
+ IRQF_ONESHOT,
+ &bxtwc_regmap_irq_chip_pwrbtn,
+ &pmic->irq_chip_data_pwrbtn);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to add PWRBTN IRQ chip\n");
+ return ret;
+ }
+
ret = bxtwc_add_chained_irq_chip(pmic, pmic->irq_chip_data,
BXTWC_TMU_LVL1_IRQ,
IRQF_ONESHOT,
diff --git a/include/linux/mfd/intel_soc_pmic.h b/include/linux/mfd/intel_soc_pmic.h
index 5aacdb017a9f6..806a4f095312b 100644
--- a/include/linux/mfd/intel_soc_pmic.h
+++ b/include/linux/mfd/intel_soc_pmic.h
@@ -25,6 +25,7 @@ struct intel_soc_pmic {
int irq;
struct regmap *regmap;
struct regmap_irq_chip_data *irq_chip_data;
+ struct regmap_irq_chip_data *irq_chip_data_pwrbtn;
struct regmap_irq_chip_data *irq_chip_data_tmu;
struct regmap_irq_chip_data *irq_chip_data_bcu;
struct regmap_irq_chip_data *irq_chip_data_adc;
--
2.20.1
From: Ernesto A. Fernández <[email protected]>
[ Upstream commit ef75bcc5763d130451a99825f247d301088b790b ]
hfs_brec_update_parent() may hit BUG_ON() if the first record of both a
leaf node and its parent are changed, and if this forces the parent to
be split. It is not possible for this to happen on a valid hfs
filesystem because the index nodes have fixed length keys.
For reasons I ignore, the hfs module does have support for a number of
hfsplus features. A corrupt btree header may report variable length
keys and trigger this BUG, so it's better to fix it.
Link: http://lkml.kernel.org/r/cf9b02d57f806217a2b1bf5db8c3e39730d8f603.1535682463.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Viacheslav Dubeyko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/hfs/brec.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/hfs/brec.c b/fs/hfs/brec.c
index da25c49203cc5..896396554bcc1 100644
--- a/fs/hfs/brec.c
+++ b/fs/hfs/brec.c
@@ -445,6 +445,7 @@ static int hfs_brec_update_parent(struct hfs_find_data *fd)
/* restore search_key */
hfs_bnode_read_key(node, fd->search_key, 14);
}
+ new_node = NULL;
}
if (!rec && node->parent)
--
2.20.1
From: Jerry Hoemann <[email protected]>
[ Upstream commit 04d5e4bd37516ad60854eb74592c7dbddd75d277 ]
Printf's say errno but print the string version of error.
Make consistent.
Signed-off-by: Jerry Hoemann <[email protected]>
Signed-off-by: Shuah Khan (Samsung OSG) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/watchdog/watchdog-test.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/watchdog/watchdog-test.c b/tools/testing/selftests/watchdog/watchdog-test.c
index e029e2017280f..f1c6e025cbe54 100644
--- a/tools/testing/selftests/watchdog/watchdog-test.c
+++ b/tools/testing/selftests/watchdog/watchdog-test.c
@@ -109,7 +109,7 @@ int main(int argc, char *argv[])
printf("Last boot is caused by: %s.\n", (flags != 0) ?
"Watchdog" : "Power-On-Reset");
else
- printf("WDIOC_GETBOOTSTATUS errno '%s'\n", strerror(errno));
+ printf("WDIOC_GETBOOTSTATUS error '%s'\n", strerror(errno));
break;
case 'd':
flags = WDIOS_DISABLECARD;
@@ -117,7 +117,7 @@ int main(int argc, char *argv[])
if (!ret)
printf("Watchdog card disabled.\n");
else
- printf("WDIOS_DISABLECARD errno '%s'\n", strerror(errno));
+ printf("WDIOS_DISABLECARD error '%s'\n", strerror(errno));
break;
case 'e':
flags = WDIOS_ENABLECARD;
@@ -125,7 +125,7 @@ int main(int argc, char *argv[])
if (!ret)
printf("Watchdog card enabled.\n");
else
- printf("WDIOS_ENABLECARD errno '%s'\n", strerror(errno));
+ printf("WDIOS_ENABLECARD error '%s'\n", strerror(errno));
break;
case 'p':
ping_rate = strtoul(optarg, NULL, 0);
@@ -139,7 +139,7 @@ int main(int argc, char *argv[])
if (!ret)
printf("Watchdog timeout set to %u seconds.\n", flags);
else
- printf("WDIOC_SETTIMEOUT errno '%s'\n", strerror(errno));
+ printf("WDIOC_SETTIMEOUT error '%s'\n", strerror(errno));
break;
default:
usage(argv[0]);
--
2.20.1
From: Marek Szyprowski <[email protected]>
[ Upstream commit efddff27c886e729a7f84a7205bd84d7d4af7336 ]
IRQ wake up support for MAX8997 driver was initially configured by
respective property in pdata. However, after the driver conversion to
device-tree, setting it was left as 'todo'. Nowadays most of other PMIC MFD
drivers initialized from device-tree assume that they can be an irq wakeup
source, so enable it also for MAX8997. This fixes support for wakeup from
MAX8997 RTC alarm.
Signed-off-by: Marek Szyprowski <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/max8997.c | 8 +-------
include/linux/mfd/max8997.h | 1 -
2 files changed, 1 insertion(+), 8 deletions(-)
diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
index 3f554c4475218..d1495d76bf2c3 100644
--- a/drivers/mfd/max8997.c
+++ b/drivers/mfd/max8997.c
@@ -153,12 +153,6 @@ static struct max8997_platform_data *max8997_i2c_parse_dt_pdata(
pd->ono = irq_of_parse_and_map(dev->of_node, 1);
- /*
- * ToDo: the 'wakeup' member in the platform data is more of a linux
- * specfic information. Hence, there is no binding for that yet and
- * not parsed here.
- */
-
return pd;
}
@@ -246,7 +240,7 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
*/
/* MAX8997 has a power button input. */
- device_init_wakeup(max8997->dev, pdata->wakeup);
+ device_init_wakeup(max8997->dev, true);
return ret;
diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h
index cf815577bd686..3ae1fe743bc34 100644
--- a/include/linux/mfd/max8997.h
+++ b/include/linux/mfd/max8997.h
@@ -178,7 +178,6 @@ struct max8997_led_platform_data {
struct max8997_platform_data {
/* IRQ */
int ono;
- int wakeup;
/* ---- PMIC ---- */
struct max8997_regulator_data *regulators;
--
2.20.1
From: Ernesto A. Fernández <[email protected]>
[ Upstream commit d92915c35bfaf763d78bf1d5ac7f183420e3bd99 ]
Inserting or deleting a record in a btree may require splitting several of
its nodes. If we hit ENOSPC halfway through, the new nodes will be left
orphaned and their records will be lost. This could mean lost inodes,
extents or xattrs.
Henceforth, check the available disk space before making any changes.
This still leaves the potential problem of corruption on ENOMEM.
The patch can be tested with xfstests generic/027.
Link: http://lkml.kernel.org/r/4596eef22fbda137b4ffa0272d92f0da15364421.1536269129.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/hfsplus/attributes.c | 10 ++++++++++
fs/hfsplus/btree.c | 44 ++++++++++++++++++++++++++---------------
fs/hfsplus/catalog.c | 24 ++++++++++++++++++++++
fs/hfsplus/extents.c | 4 ++++
fs/hfsplus/hfsplus_fs.h | 2 ++
5 files changed, 68 insertions(+), 16 deletions(-)
diff --git a/fs/hfsplus/attributes.c b/fs/hfsplus/attributes.c
index 2bab6b3cdba48..e6d554476db41 100644
--- a/fs/hfsplus/attributes.c
+++ b/fs/hfsplus/attributes.c
@@ -217,6 +217,11 @@ int hfsplus_create_attr(struct inode *inode,
if (err)
goto failed_init_create_attr;
+ /* Fail early and avoid ENOSPC during the btree operation */
+ err = hfs_bmap_reserve(fd.tree, fd.tree->depth + 1);
+ if (err)
+ goto failed_create_attr;
+
if (name) {
err = hfsplus_attr_build_key(sb, fd.search_key,
inode->i_ino, name);
@@ -313,6 +318,11 @@ int hfsplus_delete_attr(struct inode *inode, const char *name)
if (err)
return err;
+ /* Fail early and avoid ENOSPC during the btree operation */
+ err = hfs_bmap_reserve(fd.tree, fd.tree->depth);
+ if (err)
+ goto out;
+
if (name) {
err = hfsplus_attr_build_key(sb, fd.search_key,
inode->i_ino, name);
diff --git a/fs/hfsplus/btree.c b/fs/hfsplus/btree.c
index 3de3bc4918b55..66774f4cb4fd5 100644
--- a/fs/hfsplus/btree.c
+++ b/fs/hfsplus/btree.c
@@ -342,26 +342,21 @@ static struct hfs_bnode *hfs_bmap_new_bmap(struct hfs_bnode *prev, u32 idx)
return node;
}
-struct hfs_bnode *hfs_bmap_alloc(struct hfs_btree *tree)
+/* Make sure @tree has enough space for the @rsvd_nodes */
+int hfs_bmap_reserve(struct hfs_btree *tree, int rsvd_nodes)
{
- struct hfs_bnode *node, *next_node;
- struct page **pagep;
- u32 nidx, idx;
- unsigned off;
- u16 off16;
- u16 len;
- u8 *data, byte, m;
- int i;
+ struct inode *inode = tree->inode;
+ struct hfsplus_inode_info *hip = HFSPLUS_I(inode);
+ u32 count;
+ int res;
- while (!tree->free_nodes) {
- struct inode *inode = tree->inode;
- struct hfsplus_inode_info *hip = HFSPLUS_I(inode);
- u32 count;
- int res;
+ if (rsvd_nodes <= 0)
+ return 0;
+ while (tree->free_nodes < rsvd_nodes) {
res = hfsplus_file_extend(inode, hfs_bnode_need_zeroout(tree));
if (res)
- return ERR_PTR(res);
+ return res;
hip->phys_size = inode->i_size =
(loff_t)hip->alloc_blocks <<
HFSPLUS_SB(tree->sb)->alloc_blksz_shift;
@@ -369,9 +364,26 @@ struct hfs_bnode *hfs_bmap_alloc(struct hfs_btree *tree)
hip->alloc_blocks << HFSPLUS_SB(tree->sb)->fs_shift;
inode_set_bytes(inode, inode->i_size);
count = inode->i_size >> tree->node_size_shift;
- tree->free_nodes = count - tree->node_count;
+ tree->free_nodes += count - tree->node_count;
tree->node_count = count;
}
+ return 0;
+}
+
+struct hfs_bnode *hfs_bmap_alloc(struct hfs_btree *tree)
+{
+ struct hfs_bnode *node, *next_node;
+ struct page **pagep;
+ u32 nidx, idx;
+ unsigned off;
+ u16 off16;
+ u16 len;
+ u8 *data, byte, m;
+ int i, res;
+
+ res = hfs_bmap_reserve(tree, 1);
+ if (res)
+ return ERR_PTR(res);
nidx = 0;
node = hfs_bnode_find(tree, nidx);
diff --git a/fs/hfsplus/catalog.c b/fs/hfsplus/catalog.c
index a196369ba779f..35472cba750e1 100644
--- a/fs/hfsplus/catalog.c
+++ b/fs/hfsplus/catalog.c
@@ -265,6 +265,14 @@ int hfsplus_create_cat(u32 cnid, struct inode *dir,
if (err)
return err;
+ /*
+ * Fail early and avoid ENOSPC during the btree operations. We may
+ * have to split the root node at most once.
+ */
+ err = hfs_bmap_reserve(fd.tree, 2 * fd.tree->depth);
+ if (err)
+ goto err2;
+
hfsplus_cat_build_key_with_cnid(sb, fd.search_key, cnid);
entry_size = hfsplus_fill_cat_thread(sb, &entry,
S_ISDIR(inode->i_mode) ?
@@ -333,6 +341,14 @@ int hfsplus_delete_cat(u32 cnid, struct inode *dir, const struct qstr *str)
if (err)
return err;
+ /*
+ * Fail early and avoid ENOSPC during the btree operations. We may
+ * have to split the root node at most once.
+ */
+ err = hfs_bmap_reserve(fd.tree, 2 * (int)fd.tree->depth - 2);
+ if (err)
+ goto out;
+
if (!str) {
int len;
@@ -433,6 +449,14 @@ int hfsplus_rename_cat(u32 cnid,
return err;
dst_fd = src_fd;
+ /*
+ * Fail early and avoid ENOSPC during the btree operations. We may
+ * have to split the root node at most twice.
+ */
+ err = hfs_bmap_reserve(src_fd.tree, 4 * (int)src_fd.tree->depth - 1);
+ if (err)
+ goto out;
+
/* find the old dir entry and read the data */
err = hfsplus_cat_build_key(sb, src_fd.search_key,
src_dir->i_ino, src_name);
diff --git a/fs/hfsplus/extents.c b/fs/hfsplus/extents.c
index 8e0f59767694b..8a8893d522ef3 100644
--- a/fs/hfsplus/extents.c
+++ b/fs/hfsplus/extents.c
@@ -100,6 +100,10 @@ static int __hfsplus_ext_write_extent(struct inode *inode,
if (hip->extent_state & HFSPLUS_EXT_NEW) {
if (res != -ENOENT)
return res;
+ /* Fail early and avoid ENOSPC during the btree operation */
+ res = hfs_bmap_reserve(fd->tree, fd->tree->depth + 1);
+ if (res)
+ return res;
hfs_brec_insert(fd, hip->cached_extents,
sizeof(hfsplus_extent_rec));
hip->extent_state &= ~(HFSPLUS_EXT_DIRTY | HFSPLUS_EXT_NEW);
diff --git a/fs/hfsplus/hfsplus_fs.h b/fs/hfsplus/hfsplus_fs.h
index 8e039435958a8..dd7ad9f13e3aa 100644
--- a/fs/hfsplus/hfsplus_fs.h
+++ b/fs/hfsplus/hfsplus_fs.h
@@ -311,6 +311,7 @@ static inline unsigned short hfsplus_min_io_size(struct super_block *sb)
#define hfs_btree_open hfsplus_btree_open
#define hfs_btree_close hfsplus_btree_close
#define hfs_btree_write hfsplus_btree_write
+#define hfs_bmap_reserve hfsplus_bmap_reserve
#define hfs_bmap_alloc hfsplus_bmap_alloc
#define hfs_bmap_free hfsplus_bmap_free
#define hfs_bnode_read hfsplus_bnode_read
@@ -395,6 +396,7 @@ u32 hfsplus_calc_btree_clump_size(u32 block_size, u32 node_size, u64 sectors,
struct hfs_btree *hfs_btree_open(struct super_block *sb, u32 id);
void hfs_btree_close(struct hfs_btree *tree);
int hfs_btree_write(struct hfs_btree *tree);
+int hfs_bmap_reserve(struct hfs_btree *tree, int rsvd_nodes);
struct hfs_bnode *hfs_bmap_alloc(struct hfs_btree *tree);
void hfs_bmap_free(struct hfs_bnode *node);
--
2.20.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 4b408c74ee5a0b74fc9265c2fe39b0e7dec7c056 ]
The concern here is that "gup->size" is a u64 and "nr_pages" is unsigned
long. On 32 bit systems we could trick the kernel into allocating fewer
pages than expected.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 64c349f4ae78 ("mm: add infrastructure for get_user_pages_fast() benchmarking")
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: "Michael S. Tsirkin" <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: YueHaibing <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/gup_benchmark.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/mm/gup_benchmark.c b/mm/gup_benchmark.c
index 7405c9d89d651..7e6f2d2dafb55 100644
--- a/mm/gup_benchmark.c
+++ b/mm/gup_benchmark.c
@@ -23,6 +23,9 @@ static int __gup_benchmark_ioctl(unsigned int cmd,
int nr;
struct page **pages;
+ if (gup->size > ULONG_MAX)
+ return -EINVAL;
+
nr_pages = gup->size / PAGE_SIZE;
pages = kvcalloc(nr_pages, sizeof(void *), GFP_KERNEL);
if (!pages)
--
2.20.1
From: Hangbin Liu <[email protected]>
[ Upstream commit 966c37f2d77eb44d47af8e919267b1ba675b2eca ]
Similiar with ipv6 mcast commit 89225d1ce6af3 ("net: ipv6: mld: fix v1/v2
switchback timeout to rfc3810, 9.12.")
i) RFC3376 8.12. Older Version Querier Present Timeout says:
The Older Version Querier Interval is the time-out for transitioning
a host back to IGMPv3 mode once an older version query is heard.
When an older version query is received, hosts set their Older
Version Querier Present Timer to Older Version Querier Interval.
This value MUST be ((the Robustness Variable) times (the Query
Interval in the last Query received)) plus (one Query Response
Interval).
Currently we only use a hardcode value IGMP_V1/v2_ROUTER_PRESENT_TIMEOUT.
Fix it by adding two new items mr_qi(Query Interval) and mr_qri(Query Response
Interval) in struct in_device.
Now we can calculate the switchback time via (mr_qrv * mr_qi) + mr_qri.
We need update these values when receive IGMPv3 queries.
Reported-by: Ying Xu <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/inetdevice.h | 4 ++-
net/ipv4/igmp.c | 53 ++++++++++++++++++++++++++------------
2 files changed, 39 insertions(+), 18 deletions(-)
diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h
index c759d1cbcedd8..a64f21a97369a 100644
--- a/include/linux/inetdevice.h
+++ b/include/linux/inetdevice.h
@@ -37,7 +37,9 @@ struct in_device {
unsigned long mr_v1_seen;
unsigned long mr_v2_seen;
unsigned long mr_maxdelay;
- unsigned char mr_qrv;
+ unsigned long mr_qi; /* Query Interval */
+ unsigned long mr_qri; /* Query Response Interval */
+ unsigned char mr_qrv; /* Query Robustness Variable */
unsigned char mr_gq_running;
unsigned char mr_ifc_count;
struct timer_list mr_gq_timer; /* general query timer */
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index b2240b7f225d5..523d26f5e22e2 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -111,13 +111,10 @@
#ifdef CONFIG_IP_MULTICAST
/* Parameter names and values are taken from igmp-v2-06 draft */
-#define IGMP_V1_ROUTER_PRESENT_TIMEOUT (400*HZ)
-#define IGMP_V2_ROUTER_PRESENT_TIMEOUT (400*HZ)
#define IGMP_V2_UNSOLICITED_REPORT_INTERVAL (10*HZ)
#define IGMP_V3_UNSOLICITED_REPORT_INTERVAL (1*HZ)
+#define IGMP_QUERY_INTERVAL (125*HZ)
#define IGMP_QUERY_RESPONSE_INTERVAL (10*HZ)
-#define IGMP_QUERY_ROBUSTNESS_VARIABLE 2
-
#define IGMP_INITIAL_REPORT_DELAY (1)
@@ -953,13 +950,15 @@ static bool igmp_heard_query(struct in_device *in_dev, struct sk_buff *skb,
max_delay = IGMP_QUERY_RESPONSE_INTERVAL;
in_dev->mr_v1_seen = jiffies +
- IGMP_V1_ROUTER_PRESENT_TIMEOUT;
+ (in_dev->mr_qrv * in_dev->mr_qi) +
+ in_dev->mr_qri;
group = 0;
} else {
/* v2 router present */
max_delay = ih->code*(HZ/IGMP_TIMER_SCALE);
in_dev->mr_v2_seen = jiffies +
- IGMP_V2_ROUTER_PRESENT_TIMEOUT;
+ (in_dev->mr_qrv * in_dev->mr_qi) +
+ in_dev->mr_qri;
}
/* cancel the interface change timer */
in_dev->mr_ifc_count = 0;
@@ -999,8 +998,21 @@ static bool igmp_heard_query(struct in_device *in_dev, struct sk_buff *skb,
if (!max_delay)
max_delay = 1; /* can't mod w/ 0 */
in_dev->mr_maxdelay = max_delay;
- if (ih3->qrv)
- in_dev->mr_qrv = ih3->qrv;
+
+ /* RFC3376, 4.1.6. QRV and 4.1.7. QQIC, when the most recently
+ * received value was zero, use the default or statically
+ * configured value.
+ */
+ in_dev->mr_qrv = ih3->qrv ?: net->ipv4.sysctl_igmp_qrv;
+ in_dev->mr_qi = IGMPV3_QQIC(ih3->qqic)*HZ ?: IGMP_QUERY_INTERVAL;
+
+ /* RFC3376, 8.3. Query Response Interval:
+ * The number of seconds represented by the [Query Response
+ * Interval] must be less than the [Query Interval].
+ */
+ if (in_dev->mr_qri >= in_dev->mr_qi)
+ in_dev->mr_qri = (in_dev->mr_qi/HZ - 1)*HZ;
+
if (!group) { /* general query */
if (ih3->nsrcs)
return true; /* no sources allowed */
@@ -1738,18 +1750,30 @@ void ip_mc_down(struct in_device *in_dev)
ip_mc_dec_group(in_dev, IGMP_ALL_HOSTS);
}
-void ip_mc_init_dev(struct in_device *in_dev)
-{
#ifdef CONFIG_IP_MULTICAST
+static void ip_mc_reset(struct in_device *in_dev)
+{
struct net *net = dev_net(in_dev->dev);
+
+ in_dev->mr_qi = IGMP_QUERY_INTERVAL;
+ in_dev->mr_qri = IGMP_QUERY_RESPONSE_INTERVAL;
+ in_dev->mr_qrv = net->ipv4.sysctl_igmp_qrv;
+}
+#else
+static void ip_mc_reset(struct in_device *in_dev)
+{
+}
#endif
+
+void ip_mc_init_dev(struct in_device *in_dev)
+{
ASSERT_RTNL();
#ifdef CONFIG_IP_MULTICAST
timer_setup(&in_dev->mr_gq_timer, igmp_gq_timer_expire, 0);
timer_setup(&in_dev->mr_ifc_timer, igmp_ifc_timer_expire, 0);
- in_dev->mr_qrv = net->ipv4.sysctl_igmp_qrv;
#endif
+ ip_mc_reset(in_dev);
spin_lock_init(&in_dev->mc_tomb_lock);
}
@@ -1759,15 +1783,10 @@ void ip_mc_init_dev(struct in_device *in_dev)
void ip_mc_up(struct in_device *in_dev)
{
struct ip_mc_list *pmc;
-#ifdef CONFIG_IP_MULTICAST
- struct net *net = dev_net(in_dev->dev);
-#endif
ASSERT_RTNL();
-#ifdef CONFIG_IP_MULTICAST
- in_dev->mr_qrv = net->ipv4.sysctl_igmp_qrv;
-#endif
+ ip_mc_reset(in_dev);
ip_mc_inc_group(in_dev, IGMP_ALL_HOSTS);
for_each_pmc_rtnl(in_dev, pmc) {
--
2.20.1
From: Ernesto A. Fernández <[email protected]>
[ Upstream commit dc8844aada735890a6de109bef327f5df36a982e ]
The vfs takes care of updating ctime and mtime on ftruncate(), but on
truncate() it must be done by the module.
This patch can be tested with xfstests generic/313.
Link: http://lkml.kernel.org/r/9beb0913eea37288599e8e1b7cec8768fb52d1b8.1539316825.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <[email protected]>
Reviewed-by: Vyacheslav Dubeyko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/hfsplus/inode.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c
index 8e9427a42b819..d7ab9d8c4b674 100644
--- a/fs/hfsplus/inode.c
+++ b/fs/hfsplus/inode.c
@@ -261,6 +261,7 @@ static int hfsplus_setattr(struct dentry *dentry, struct iattr *attr)
}
truncate_setsize(inode, attr->ia_size);
hfsplus_file_truncate(inode);
+ inode->i_mtime = inode->i_ctime = current_time(inode);
}
setattr_copy(inode, attr);
--
2.20.1
From: Felipe Rechia <[email protected]>
[ Upstream commit e901378578c62202594cba0f6c076f3df365ec91 ]
Fix a bug introduced by the creation of flush_all_to_thread() for
processors that have SPE (Signal Processing Engine) and use it to
compute floating-point operations.
>From userspace perspective, the problem was seen in attempts of
computing floating-point operations which should generate exceptions.
For example:
fork();
float x = 0.0 / 0.0;
isnan(x); // forked process returns False (should be True)
The operation above also should always cause the SPEFSCR FINV bit to
be set. However, the SPE floating-point exceptions were turned off
after a fork().
Kernel versions prior to the bug used flush_spe_to_thread(), which
first saves SPEFSCR register values in tsk->thread and then calls
giveup_spe(tsk).
After commit 579e633e764e, the save_all() function was called first
to giveup_spe(), and then the SPEFSCR register values were saved in
tsk->thread. This would save the SPEFSCR register values after
disabling SPE for that thread, causing the bug described above.
Fixes 579e633e764e ("powerpc: create flush_all_to_thread()")
Signed-off-by: Felipe Rechia <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/process.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 909c9407e392a..02b69a68139cc 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -575,12 +575,11 @@ void flush_all_to_thread(struct task_struct *tsk)
if (tsk->thread.regs) {
preempt_disable();
BUG_ON(tsk != current);
- save_all(tsk);
-
#ifdef CONFIG_SPE
if (tsk->thread.regs->msr & MSR_SPE)
tsk->thread.spefscr = mfspr(SPRN_SPEFSCR);
#endif
+ save_all(tsk);
preempt_enable();
}
--
2.20.1
From: David Hildenbrand <[email protected]>
[ Upstream commit 8df1d0e4a265f25dc1e7e7624ccdbcb4a6630c89 ]
add_memory() currently does not take the device_hotplug_lock, however
is aleady called under the lock from
arch/powerpc/platforms/pseries/hotplug-memory.c
drivers/acpi/acpi_memhotplug.c
to synchronize against CPU hot-remove and similar.
In general, we should hold the device_hotplug_lock when adding memory to
synchronize against online/offline request (e.g. from user space) - which
already resulted in lock inversions due to device_lock() and
mem_hotplug_lock - see 30467e0b3be ("mm, hotplug: fix concurrent memory
hot-add deadlock"). add_memory()/add_memory_resource() will create memory
block devices, so this really feels like the right thing to do.
Holding the device_hotplug_lock makes sure that a memory block device
can really only be accessed (e.g. via .online/.state) from user space,
once the memory has been fully added to the system.
The lock is not held yet in
drivers/xen/balloon.c
arch/powerpc/platforms/powernv/memtrace.c
drivers/s390/char/sclp_cmd.c
drivers/hv/hv_balloon.c
So, let's either use the locked variants or take the lock.
Don't export add_memory_resource(), as it once was exported to be used by
XEN, which is never built as a module. If somebody requires it, we also
have to export a locked variant (as device_hotplug_lock is never
exported).
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: David Hildenbrand <[email protected]>
Reviewed-by: Pavel Tatashin <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Rashmica Gupta <[email protected]>
Reviewed-by: Oscar Salvador <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Len Brown <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Boris Ostrovsky <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Nathan Fontenot <[email protected]>
Cc: John Allen <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Mathieu Malaterre <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: YASUAKI ISHIMATSU <[email protected]>
Cc: Balbir Singh <[email protected]>
Cc: Haiyang Zhang <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: "K. Y. Srinivasan" <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Michael Neuling <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Cc: Stephen Hemminger <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../platforms/pseries/hotplug-memory.c | 2 +-
drivers/acpi/acpi_memhotplug.c | 2 +-
drivers/base/memory.c | 9 ++++++--
drivers/xen/balloon.c | 3 +++
include/linux/memory_hotplug.h | 1 +
mm/memory_hotplug.c | 22 ++++++++++++++++---
6 files changed, 32 insertions(+), 7 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index f99cd31b6fd1a..7d61da2fe5226 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -705,7 +705,7 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb)
nid = memory_add_physaddr_to_nid(lmb->base_addr);
/* Add the memory */
- rc = add_memory(nid, lmb->base_addr, block_sz);
+ rc = __add_memory(nid, lmb->base_addr, block_sz);
if (rc) {
dlpar_remove_device_tree_lmb(lmb);
return rc;
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 6b0d3ef7309cb..2ccfbb61ca899 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -228,7 +228,7 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
if (node < 0)
node = memory_add_physaddr_to_nid(info->start_addr);
- result = add_memory(node, info->start_addr, info->length);
+ result = __add_memory(node, info->start_addr, info->length);
/*
* If the memory block has been used by the kernel, add_memory()
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index 85ee64d0a44e9..07901cacfec63 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -519,15 +519,20 @@ memory_probe_store(struct device *dev, struct device_attribute *attr,
if (phys_addr & ((pages_per_block << PAGE_SHIFT) - 1))
return -EINVAL;
+ ret = lock_device_hotplug_sysfs();
+ if (ret)
+ goto out;
+
nid = memory_add_physaddr_to_nid(phys_addr);
- ret = add_memory(nid, phys_addr,
- MIN_MEMORY_BLOCK_SIZE * sections_per_block);
+ ret = __add_memory(nid, phys_addr,
+ MIN_MEMORY_BLOCK_SIZE * sections_per_block);
if (ret)
goto out;
ret = count;
out:
+ unlock_device_hotplug();
return ret;
}
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index d4e8b717ce2b2..747a15acbce37 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -350,7 +350,10 @@ static enum bp_state reserve_additional_memory(void)
* callers drop the mutex before trying again.
*/
mutex_unlock(&balloon_mutex);
+ /* add_memory_resource() requires the device_hotplug lock */
+ lock_device_hotplug();
rc = add_memory_resource(nid, resource, memhp_auto_online);
+ unlock_device_hotplug();
mutex_lock(&balloon_mutex);
if (rc) {
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index 34a28227068dc..16487052017d5 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -322,6 +322,7 @@ static inline void remove_memory(int nid, u64 start, u64 size) {}
extern void __ref free_area_init_core_hotplug(int nid);
extern int walk_memory_range(unsigned long start_pfn, unsigned long end_pfn,
void *arg, int (*func)(struct memory_block *, void *));
+extern int __add_memory(int nid, u64 start, u64 size);
extern int add_memory(int nid, u64 start, u64 size);
extern int add_memory_resource(int nid, struct resource *resource, bool online);
extern int arch_add_memory(int nid, u64 start, u64 size,
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index af67355622159..1992b416661fe 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1114,7 +1114,12 @@ static int online_memory_block(struct memory_block *mem, void *arg)
return device_online(&mem->dev);
}
-/* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */
+/*
+ * NOTE: The caller must call lock_device_hotplug() to serialize hotplug
+ * and online/offline operations (triggered e.g. by sysfs).
+ *
+ * we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG
+ */
int __ref add_memory_resource(int nid, struct resource *res, bool online)
{
u64 start, size;
@@ -1183,9 +1188,9 @@ int __ref add_memory_resource(int nid, struct resource *res, bool online)
mem_hotplug_done();
return ret;
}
-EXPORT_SYMBOL_GPL(add_memory_resource);
-int __ref add_memory(int nid, u64 start, u64 size)
+/* requires device_hotplug_lock, see add_memory_resource() */
+int __ref __add_memory(int nid, u64 start, u64 size)
{
struct resource *res;
int ret;
@@ -1199,6 +1204,17 @@ int __ref add_memory(int nid, u64 start, u64 size)
release_memory_resource(res);
return ret;
}
+
+int add_memory(int nid, u64 start, u64 size)
+{
+ int rc;
+
+ lock_device_hotplug();
+ rc = __add_memory(nid, start, size);
+ unlock_device_hotplug();
+
+ return rc;
+}
EXPORT_SYMBOL_GPL(add_memory);
#ifdef CONFIG_MEMORY_HOTREMOVE
--
2.20.1
From: Dave Chinner <[email protected]>
[ Upstream commit 64081362e8ff4587b4554087f3cfc73d3e0a4cd7 ]
We've recently seen a workload on XFS filesystems with a repeatable
deadlock between background writeback and a multi-process application
doing concurrent writes and fsyncs to a small range of a file.
range_cyclic
writeback Process 1 Process 2
xfs_vm_writepages
write_cache_pages
writeback_index = 2
cycled = 0
....
find page 2 dirty
lock Page 2
->writepage
page 2 writeback
page 2 clean
page 2 added to bio
no more pages
write()
locks page 1
dirties page 1
locks page 2
dirties page 1
fsync()
....
xfs_vm_writepages
write_cache_pages
start index 0
find page 1 towrite
lock Page 1
->writepage
page 1 writeback
page 1 clean
page 1 added to bio
find page 2 towrite
lock Page 2
page 2 is writeback
<blocks>
write()
locks page 1
dirties page 1
fsync()
....
xfs_vm_writepages
write_cache_pages
start index 0
!done && !cycled
sets index to 0, restarts lookup
find page 1 dirty
find page 1 towrite
lock Page 1
page 1 is writeback
<blocks>
lock Page 1
<blocks>
DEADLOCK because:
- process 1 needs page 2 writeback to complete to make
enough progress to issue IO pending for page 1
- writeback needs page 1 writeback to complete so process 2
can progress and unlock the page it is blocked on, then it
can issue the IO pending for page 2
- process 2 can't make progress until process 1 issues IO
for page 1
The underlying cause of the problem here is that range_cyclic writeback is
processing pages in descending index order as we hold higher index pages
in a structure controlled from above write_cache_pages(). The
write_cache_pages() caller needs to be able to submit these pages for IO
before write_cache_pages restarts writeback at mapping index 0 to avoid
wcp inverting the page lock/writeback wait order.
generic_writepages() is not susceptible to this bug as it has no private
context held across write_cache_pages() - filesystems using this
infrastructure always submit pages in ->writepage immediately and so there
is no problem with range_cyclic going back to mapping index 0.
However:
mpage_writepages() has a private bio context,
exofs_writepages() has page_collect
fuse_writepages() has fuse_fill_wb_data
nfs_writepages() has nfs_pageio_descriptor
xfs_vm_writepages() has xfs_writepage_ctx
All of these ->writepages implementations can hold pages under writeback
in their private structures until write_cache_pages() returns, and hence
they are all susceptible to this deadlock.
Also worth noting is that ext4 has it's own bastardised version of
write_cache_pages() and so it /may/ have an equivalent deadlock. I looked
at the code long enough to understand that it has a similar retry loop for
range_cyclic writeback reaching the end of the file and then promptly ran
away before my eyes bled too much. I'll leave it for the ext4 developers
to determine if their code is actually has this deadlock and how to fix it
if it has.
There's a few ways I can see avoid this deadlock. There's probably more,
but these are the first I've though of:
1. get rid of range_cyclic altogether
2. range_cyclic always stops at EOF, and we start again from
writeback index 0 on the next call into write_cache_pages()
2a. wcp also returns EAGAIN to ->writepages implementations to
indicate range cyclic has hit EOF. writepages implementations can
then flush the current context and call wpc again to continue. i.e.
lift the retry into the ->writepages implementation
3. range_cyclic uses trylock_page() rather than lock_page(), and it
skips pages it can't lock without blocking. It will already do this
for pages under writeback, so this seems like a no-brainer
3a. all non-WB_SYNC_ALL writeback uses trylock_page() to avoid
blocking as per pages under writeback.
I don't think #1 is an option - range_cyclic prevents frequently
dirtied lower file offset from starving background writeback of
rarely touched higher file offsets.
#2 is simple, and I don't think it will have any impact on
performance as going back to the start of the file implies an
immediate seek. We'll have exactly the same number of seeks if we
switch writeback to another inode, and then come back to this one
later and restart from index 0.
#2a is pretty much "status quo without the deadlock". Moving the
retry loop up into the wcp caller means we can issue IO on the
pending pages before calling wcp again, and so avoid locking or
waiting on pages in the wrong order. I'm not convinced we need to do
this given that we get the same thing from #2 on the next writeback
call from the writeback infrastructure.
#3 is really just a band-aid - it doesn't fix the access/wait
inversion problem, just prevents it from becoming a deadlock
situation. I'd prefer we fix the inversion, not sweep it under the
carpet like this.
#3a is really an optimisation that just so happens to include the
band-aid fix of #3.
So it seems that the simplest way to fix this issue is to implement
solution #2
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/page-writeback.c | 33 +++++++++++++++------------------
1 file changed, 15 insertions(+), 18 deletions(-)
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index ea4fd3af3b4bd..43df0c52e1ccb 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -2149,6 +2149,13 @@ EXPORT_SYMBOL(tag_pages_for_writeback);
* not miss some pages (e.g., because some other process has cleared TOWRITE
* tag we set). The rule we follow is that TOWRITE tag can be cleared only
* by the process clearing the DIRTY tag (and submitting the page for IO).
+ *
+ * To avoid deadlocks between range_cyclic writeback and callers that hold
+ * pages in PageWriteback to aggregate IO until write_cache_pages() returns,
+ * we do not loop back to the start of the file. Doing so causes a page
+ * lock/page writeback access order inversion - we should only ever lock
+ * multiple pages in ascending page->index order, and looping back to the start
+ * of the file violates that rule and causes deadlocks.
*/
int write_cache_pages(struct address_space *mapping,
struct writeback_control *wbc, writepage_t writepage,
@@ -2163,7 +2170,6 @@ int write_cache_pages(struct address_space *mapping,
pgoff_t index;
pgoff_t end; /* Inclusive */
pgoff_t done_index;
- int cycled;
int range_whole = 0;
int tag;
@@ -2171,23 +2177,17 @@ int write_cache_pages(struct address_space *mapping,
if (wbc->range_cyclic) {
writeback_index = mapping->writeback_index; /* prev offset */
index = writeback_index;
- if (index == 0)
- cycled = 1;
- else
- cycled = 0;
end = -1;
} else {
index = wbc->range_start >> PAGE_SHIFT;
end = wbc->range_end >> PAGE_SHIFT;
if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
range_whole = 1;
- cycled = 1; /* ignore range_cyclic tests */
}
if (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages)
tag = PAGECACHE_TAG_TOWRITE;
else
tag = PAGECACHE_TAG_DIRTY;
-retry:
if (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages)
tag_pages_for_writeback(mapping, index, end);
done_index = index;
@@ -2279,17 +2279,14 @@ int write_cache_pages(struct address_space *mapping,
pagevec_release(&pvec);
cond_resched();
}
- if (!cycled && !done) {
- /*
- * range_cyclic:
- * We hit the last page and there is more work to be done: wrap
- * back to the start of the file
- */
- cycled = 1;
- index = 0;
- end = writeback_index - 1;
- goto retry;
- }
+
+ /*
+ * If we hit the last page and there is more work to be done: wrap
+ * back the index back to the start of the file for the next
+ * time we are called.
+ */
+ if (wbc->range_cyclic && !done)
+ done_index = 0;
if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0))
mapping->writeback_index = done_index;
--
2.20.1
From: Michael Kelley <[email protected]>
[ Upstream commit 57f01796f14fecf00d330fe39c8d2477ced9cd79 ]
IRQ_MATRIX_SIZE is the number of longs needed for a bitmap, multiplied by
the size of a long, yielding a byte count. But it is used to size an array
of longs, which is way more memory than is needed.
Change IRQ_MATRIX_SIZE so it is just the number of longs needed and the
arrays come out the correct size.
Fixes: 2f75d9e1c905 ("genirq: Implement bitmap matrix allocator")
Signed-off-by: Michael Kelley <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: KY Srinivasan <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/irq/matrix.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/irq/matrix.c b/kernel/irq/matrix.c
index 92337703ca9fd..30cc217b86318 100644
--- a/kernel/irq/matrix.c
+++ b/kernel/irq/matrix.c
@@ -8,7 +8,7 @@
#include <linux/cpu.h>
#include <linux/irq.h>
-#define IRQ_MATRIX_SIZE (BITS_TO_LONGS(IRQ_MATRIX_BITS) * sizeof(unsigned long))
+#define IRQ_MATRIX_SIZE (BITS_TO_LONGS(IRQ_MATRIX_BITS))
struct cpumap {
unsigned int available;
--
2.20.1
From: Dave Jiang <[email protected]>
[ Upstream commit 7756e2b5d68c36e170a111dceea22f7365f83256 ]
ndev_vec_mask() should be returning u64 mask value instead of int.
Otherwise the mask value returned can be incorrect for larger
vectors.
Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Signed-off-by: Dave Jiang <[email protected]>
Tested-by: Lucas Van <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ntb/hw/intel/ntb_hw_gen1.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ntb/hw/intel/ntb_hw_gen1.c b/drivers/ntb/hw/intel/ntb_hw_gen1.c
index 6aa5732272791..2ad263f708da7 100644
--- a/drivers/ntb/hw/intel/ntb_hw_gen1.c
+++ b/drivers/ntb/hw/intel/ntb_hw_gen1.c
@@ -265,7 +265,7 @@ static inline int ndev_db_clear_mask(struct intel_ntb_dev *ndev, u64 db_bits,
return 0;
}
-static inline int ndev_vec_mask(struct intel_ntb_dev *ndev, int db_vector)
+static inline u64 ndev_vec_mask(struct intel_ntb_dev *ndev, int db_vector)
{
u64 shift, mask;
--
2.20.1
From: Joel Stanley <[email protected]>
[ Upstream commit c39b79082a38a4f8c801790edecbbb4d62ed2992 ]
We should use TEST_GEN_PROGS, not TEST_PROGS. That tells the selftests
makefile (lib.mk) that those tests are generated (built), and so it
adds the $(OUTPUT) prefix for us, making the out-of-tree build work
correctly.
It also means we don't need our own clean rule, lib.mk does it.
We also have to update the ptrace-pkey and core-pkey rules to use
$(OUTPUT).
Signed-off-by: Joel Stanley <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/powerpc/ptrace/Makefile | 13 ++++---------
1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/tools/testing/selftests/powerpc/ptrace/Makefile b/tools/testing/selftests/powerpc/ptrace/Makefile
index 923d531265f8c..9f9423430059e 100644
--- a/tools/testing/selftests/powerpc/ptrace/Makefile
+++ b/tools/testing/selftests/powerpc/ptrace/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-TEST_PROGS := ptrace-gpr ptrace-tm-gpr ptrace-tm-spd-gpr \
+TEST_GEN_PROGS := ptrace-gpr ptrace-tm-gpr ptrace-tm-spd-gpr \
ptrace-tar ptrace-tm-tar ptrace-tm-spd-tar ptrace-vsx ptrace-tm-vsx \
ptrace-tm-spd-vsx ptrace-tm-spr ptrace-hwbreak ptrace-pkey core-pkey \
perf-hwbreak
@@ -7,14 +7,9 @@ TEST_PROGS := ptrace-gpr ptrace-tm-gpr ptrace-tm-spd-gpr \
top_srcdir = ../../../../..
include ../../lib.mk
-all: $(TEST_PROGS)
-
CFLAGS += -m64 -I../../../../../usr/include -I../tm -mhtm -fno-pie
-ptrace-pkey core-pkey: child.h
-ptrace-pkey core-pkey: LDLIBS += -pthread
-
-$(TEST_PROGS): ../harness.c ../utils.c ../lib/reg.S ptrace.h
+$(OUTPUT)/ptrace-pkey $(OUTPUT)/core-pkey: child.h
+$(OUTPUT)/ptrace-pkey $(OUTPUT)/core-pkey: LDLIBS += -pthread
-clean:
- rm -f $(TEST_PROGS) *.o
+$(TEST_GEN_PROGS): ../harness.c ../utils.c ../lib/reg.S ptrace.h
--
2.20.1
From: Michael Ellerman <[email protected]>
[ Upstream commit 266bac361d5677e61a6815bd29abeb3bdced2b07 ]
For the out-of-tree build to work we need to tell switch_endian_test
to look for check-reversed.S in $(OUTPUT).
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/powerpc/switch_endian/Makefile | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/testing/selftests/powerpc/switch_endian/Makefile b/tools/testing/selftests/powerpc/switch_endian/Makefile
index fcd2dcb8972ba..bdc081afedb0f 100644
--- a/tools/testing/selftests/powerpc/switch_endian/Makefile
+++ b/tools/testing/selftests/powerpc/switch_endian/Makefile
@@ -8,6 +8,7 @@ EXTRA_CLEAN = $(OUTPUT)/*.o $(OUTPUT)/check-reversed.S
top_srcdir = ../../../../..
include ../../lib.mk
+$(OUTPUT)/switch_endian_test: ASFLAGS += -I $(OUTPUT)
$(OUTPUT)/switch_endian_test: $(OUTPUT)/check-reversed.S
$(OUTPUT)/check-reversed.o: $(OUTPUT)/check.o
--
2.20.1
From: Eric Dumazet <[email protected]>
[ Upstream commit fe60faa5063822f2d555f4f326c7dd72a60929bf ]
Before calling dev_hard_start_xmit(), upper layers tried
to cook optimal skb list based on BQL budget.
Problem is that GSO packets can end up comsuming more than
the BQL budget.
Breaking the loop is not useful, since requeued packets
are ahead of any packets still in the qdisc.
It is also more expensive, since next TX completion will
push these packets later, while skbs are not in cpu caches.
It is also a behavior difference with TSO packets, that can
break the BQL limit by a large amount.
Note that drivers should use __netdev_tx_sent_queue()
in order to have optimal xmit_more support, and avoid
useless atomic operations as shown in the following patch.
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/dev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/core/dev.c b/net/core/dev.c
index 4a2ee1ce6c024..0a900e353cfff 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3277,7 +3277,7 @@ struct sk_buff *dev_hard_start_xmit(struct sk_buff *first, struct net_device *de
}
skb = next;
- if (netif_xmit_stopped(txq) && skb) {
+ if (netif_tx_queue_stopped(txq) && skb) {
rc = NETDEV_TX_BUSY;
break;
}
--
2.20.1
From: Ming Lei <[email protected]>
[ Upstream commit c57cdf7a9e51d97a43e29b8f4a04157875104000 ]
rq_qos_exit() removes the current q->rq_qos, this action has to be
done after queue is frozen, otherwise the IO queue path may never
be waken up, then IO hang is caused.
So fixes this issue by moving rq_qos_exit() after queue is frozen.
Cc: Josef Bacik <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-core.c | 3 +++
block/blk-sysfs.c | 2 --
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/block/blk-core.c b/block/blk-core.c
index 074ae9376189b..ea33d6abdcfc9 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -784,6 +784,9 @@ void blk_cleanup_queue(struct request_queue *q)
* prevent that q->request_fn() gets invoked after draining finished.
*/
blk_freeze_queue(q);
+
+ rq_qos_exit(q);
+
spin_lock_irq(lock);
queue_flag_set(QUEUE_FLAG_DEAD, q);
spin_unlock_irq(lock);
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index bab47a17b96f4..8286640d4d663 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -997,8 +997,6 @@ void blk_unregister_queue(struct gendisk *disk)
kobject_del(&q->kobj);
blk_trace_remove_sysfs(disk_to_dev(disk));
- rq_qos_exit(q);
-
mutex_lock(&q->sysfs_lock);
if (q->request_fn || (q->mq_ops && q->elevator))
elv_unregister_queue(q);
--
2.20.1
From: Rasmus Villemoes <[email protected]>
[ Upstream commit 7275b097851a5e2e0dd4da039c7e96b59ac5314e ]
The static inlines in bitmap.h do not handle a compile-time constant
nbits==0 correctly (they dereference the passed src or dst pointers,
despite only 0 words being valid to access). I had the 0-day buildbot
chew on a patch [1] that would cause build failures for such cases without
complaining, suggesting that we don't have any such users currently, at
least for the 70 .config/arch combinations that was built. Should any
turn up, make sure they use the out-of-line versions, which do handle
nbits==0 correctly.
This is of course not the most efficient, but it's much less churn than
teaching all the static inlines an "if (zero_const_nbits())", and since we
don't have any current instances, this doesn't affect existing code at
all.
[1] lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Rasmus Villemoes <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Cc: Yury Norov <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Cc: Sudeep Holla <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/bitmap.h | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h
index acf5e8df3504f..a9805bacbd7ca 100644
--- a/include/linux/bitmap.h
+++ b/include/linux/bitmap.h
@@ -204,8 +204,13 @@ extern int bitmap_print_to_pagebuf(bool list, char *buf,
#define BITMAP_FIRST_WORD_MASK(start) (~0UL << ((start) & (BITS_PER_LONG - 1)))
#define BITMAP_LAST_WORD_MASK(nbits) (~0UL >> (-(nbits) & (BITS_PER_LONG - 1)))
+/*
+ * The static inlines below do not handle constant nbits==0 correctly,
+ * so make such users (should any ever turn up) call the out-of-line
+ * versions.
+ */
#define small_const_nbits(nbits) \
- (__builtin_constant_p(nbits) && (nbits) <= BITS_PER_LONG)
+ (__builtin_constant_p(nbits) && (nbits) <= BITS_PER_LONG && (nbits) > 0)
static inline void bitmap_zero(unsigned long *dst, unsigned int nbits)
{
--
2.20.1
From: Rasmus Villemoes <[email protected]>
[ Upstream commit d9873969fa8725dc6a5a21ab788c057fd8719751 ]
Most other bitmap API, including the OOL version __bitmap_shift_right,
take unsigned nbits. This was accidentally left out from 2fbad29917c98.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 2fbad29917c98 ("lib: bitmap: change bitmap_shift_right to take unsigned parameters")
Signed-off-by: Rasmus Villemoes <[email protected]>
Reported-by: Yury Norov <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Cc: Sudeep Holla <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/bitmap.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h
index a9805bacbd7ca..b71a033c781ef 100644
--- a/include/linux/bitmap.h
+++ b/include/linux/bitmap.h
@@ -403,7 +403,7 @@ static __always_inline void bitmap_clear(unsigned long *map, unsigned int start,
}
static inline void bitmap_shift_right(unsigned long *dst, const unsigned long *src,
- unsigned int shift, int nbits)
+ unsigned int shift, unsigned int nbits)
{
if (small_const_nbits(nbits))
*dst = (*src & BITMAP_LAST_WORD_MASK(nbits)) >> shift;
--
2.20.1
From: Andrei Vagin <[email protected]>
[ Upstream commit c34c1287778b080ed692c0a46a8e345206cc29e6 ]
IPPROTO_RAW isn't registred as an inet protocol, so
inet_protos[protocol] is always NULL for it.
Cc: Cyrill Gorcunov <[email protected]>
Cc: Xin Long <[email protected]>
Fixes: bf2ae2e4bf93 ("sock_diag: request _diag module only when the family or proto has been registered")
Signed-off-by: Andrei Vagin <[email protected]>
Reviewed-by: Cyrill Gorcunov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/sock.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/core/sock.c b/net/core/sock.c
index 6c11078217769..ba4f843cdd1d1 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -3347,6 +3347,7 @@ int sock_load_diag_module(int family, int protocol)
#ifdef CONFIG_INET
if (family == AF_INET &&
+ protocol != IPPROTO_RAW &&
!rcu_access_pointer(inet_protos[protocol]))
return -ENOENT;
#endif
--
2.20.1
From: Taehee Yoo <[email protected]>
[ Upstream commit 97adaddaa6db7a8af81b9b11e30cbe3628cd6700 ]
When iptables command is executed, ip_{set/get}sockopt() try to upload
bpfilter.ko if bpfilter is enabled. if it couldn't find bpfilter.ko,
command is failed.
bpfilter.ko is generated if CONFIG_BPFILTER_UMH is enabled.
ip_{set/get}sockopt() only checks CONFIG_BPFILTER.
So that if CONFIG_BPFILTER is enabled and CONFIG_BPFILTER_UMH is disabled,
iptables command is always failed.
test config:
CONFIG_BPFILTER=y
# CONFIG_BPFILTER_UMH is not set
test command:
%iptables -L
iptables: No chain/target/match by that name.
Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/ip_sockglue.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index b7a26120d5521..82f341e84faec 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -1244,7 +1244,7 @@ int ip_setsockopt(struct sock *sk, int level,
return -ENOPROTOOPT;
err = do_ip_setsockopt(sk, level, optname, optval, optlen);
-#ifdef CONFIG_BPFILTER
+#if IS_ENABLED(CONFIG_BPFILTER_UMH)
if (optname >= BPFILTER_IPT_SO_SET_REPLACE &&
optname < BPFILTER_IPT_SET_MAX)
err = bpfilter_ip_set_sockopt(sk, optname, optval, optlen);
@@ -1557,7 +1557,7 @@ int ip_getsockopt(struct sock *sk, int level,
int err;
err = do_ip_getsockopt(sk, level, optname, optval, optlen, 0);
-#ifdef CONFIG_BPFILTER
+#if IS_ENABLED(CONFIG_BPFILTER_UMH)
if (optname >= BPFILTER_IPT_SO_GET_INFO &&
optname < BPFILTER_IPT_GET_MAX)
err = bpfilter_ip_get_sockopt(sk, optname, optval, optlen);
@@ -1594,7 +1594,7 @@ int compat_ip_getsockopt(struct sock *sk, int level, int optname,
err = do_ip_getsockopt(sk, level, optname, optval, optlen,
MSG_CMSG_COMPAT);
-#ifdef CONFIG_BPFILTER
+#if IS_ENABLED(CONFIG_BPFILTER_UMH)
if (optname >= BPFILTER_IPT_SO_GET_INFO &&
optname < BPFILTER_IPT_GET_MAX)
err = bpfilter_ip_get_sockopt(sk, optname, optval, optlen);
--
2.20.1
From: Chiranjeevi Rapolu <[email protected]>
[ Upstream commit 35629182eb8f931b0de6ed38c0efac58e922c801 ]
Check for possible null pointer to avoid crash.
Signed-off-by: Chiranjeevi Rapolu <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/ov13858.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/media/i2c/ov13858.c b/drivers/media/i2c/ov13858.c
index a66f6201f53c7..cf28381a903e3 100644
--- a/drivers/media/i2c/ov13858.c
+++ b/drivers/media/i2c/ov13858.c
@@ -1612,7 +1612,8 @@ static int ov13858_init_controls(struct ov13858 *ov13858)
OV13858_NUM_OF_LINK_FREQS - 1,
0,
link_freq_menu_items);
- ov13858->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+ if (ov13858->link_freq)
+ ov13858->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
pixel_rate_max = link_freq_to_pixel_rate(link_freq_menu_items[0]);
pixel_rate_min = link_freq_to_pixel_rate(link_freq_menu_items[1]);
@@ -1635,7 +1636,8 @@ static int ov13858_init_controls(struct ov13858 *ov13858)
ov13858->hblank = v4l2_ctrl_new_std(
ctrl_hdlr, &ov13858_ctrl_ops, V4L2_CID_HBLANK,
hblank, hblank, 1, hblank);
- ov13858->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+ if (ov13858->hblank)
+ ov13858->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
exposure_max = mode->vts_def - 8;
ov13858->exposure = v4l2_ctrl_new_std(
--
2.20.1
From: Borislav Petkov <[email protected]>
[ Upstream commit 95c4fb78fb23081472465ca20d5d31c4b780ed82 ]
... because panic() itself already does this. Otherwise you have
line-broken trailer:
[ 1.836965] ---[ end Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: pgd_alloc+0x29e/0x2a0
[ 1.836965] ]---
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Kees Cook <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: "Steven Rostedt (VMware)" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/panic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/panic.c b/kernel/panic.c
index 72e001e3753e3..8138a676fb7d1 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -636,7 +636,7 @@ device_initcall(register_warn_debugfs);
*/
__visible void __stack_chk_fail(void)
{
- panic("stack-protector: Kernel stack is corrupted in: %pB\n",
+ panic("stack-protector: Kernel stack is corrupted in: %pB",
__builtin_return_address(0));
}
EXPORT_SYMBOL(__stack_chk_fail);
--
2.20.1
From: Shaokun Zhang <[email protected]>
[ Upstream commit 7d129adff3afbd3a449bc3593f2064ac546d58d3 ]
RT_TRACE shows REG_MCUFWDL value as a decimal value with a '0x'
prefix, which is somewhat misleading.
Fix it to print hexadecimal, as was intended.
Cc: Ping-Ke Shih <[email protected]>
Cc: Kalle Valo <[email protected]>
Signed-off-by: Shaokun Zhang <[email protected]>
Acked-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
index 85cedd083d2b8..75bfa9dfef4aa 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
@@ -173,7 +173,7 @@ static int _rtl92d_fw_init(struct ieee80211_hw *hw)
rtl_read_byte(rtlpriv, FW_MAC1_READY));
}
RT_TRACE(rtlpriv, COMP_FW, DBG_DMESG,
- "Polling FW ready fail!! REG_MCUFWDL:0x%08ul\n",
+ "Polling FW ready fail!! REG_MCUFWDL:0x%08x\n",
rtl_read_dword(rtlpriv, REG_MCUFWDL));
return -1;
}
--
2.20.1
From: Suganath Prabu <[email protected]>
[ Upstream commit 6cd1bc7b9b5075d395ba0120923903873fc7ea0e ]
If EEDPTagMode field in manufacturing page11 is set then unset it. This is
needed to fix a hardware bug only in SAS3/SAS2 cards. So, skipping
EEDPTagMode changes in Manufacturing page11 for SAS 3.5 controllers.
Signed-off-by: Suganath Prabu <[email protected]>
Reviewed-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index d2ab52026014f..2c556c7fcf0dc 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -4117,7 +4117,7 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
* flag unset in NVDATA.
*/
mpt3sas_config_get_manufacturing_pg11(ioc, &mpi_reply, &ioc->manu_pg11);
- if (ioc->manu_pg11.EEDPTagMode == 0) {
+ if (!ioc->is_gen35_ioc && ioc->manu_pg11.EEDPTagMode == 0) {
pr_err("%s: overriding NVDATA EEDPTagMode setting\n",
ioc->name);
ioc->manu_pg11.EEDPTagMode &= ~0x3;
--
2.20.1
From: James Smart <[email protected]>
[ Upstream commit 036cad1f1ac9ce03e2db94b8460f98eaf1e1ee4c ]
On FCoE adapters, when running link bounce test in a loop, initiator
failed to login with switch switch and required driver reload to
recover. Switch reached a point where all subsequent FLOGIs would be
LS_RJT'd. Further testing showed the condition to be related to not
performing FCF discovery between FLOGI's.
Fix by monitoring FLOGI failures and once a repeated error is seen
repeat FCF discovery.
Signed-off-by: Dick Kennedy <[email protected]>
Signed-off-by: James Smart <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_els.c | 2 ++
drivers/scsi/lpfc/lpfc_hbadisc.c | 20 ++++++++++++++++++++
drivers/scsi/lpfc/lpfc_init.c | 2 +-
drivers/scsi/lpfc/lpfc_sli.c | 11 ++---------
drivers/scsi/lpfc/lpfc_sli4.h | 1 +
5 files changed, 26 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index f3c6801c0b312..8bf916b9a987d 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1157,6 +1157,7 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
phba->fcf.fcf_flag &= ~FCF_DISCOVERY;
phba->hba_flag &= ~(FCF_RR_INPROG | HBA_DEVLOSS_TMO);
spin_unlock_irq(&phba->hbalock);
+ phba->fcf.fcf_redisc_attempted = 0; /* reset */
goto out;
}
if (!rc) {
@@ -1171,6 +1172,7 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
phba->fcf.fcf_flag &= ~FCF_DISCOVERY;
phba->hba_flag &= ~(FCF_RR_INPROG | HBA_DEVLOSS_TMO);
spin_unlock_irq(&phba->hbalock);
+ phba->fcf.fcf_redisc_attempted = 0; /* reset */
goto out;
}
}
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index ccdd82b1123f7..38a9245fddba1 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1997,6 +1997,26 @@ int lpfc_sli4_fcf_rr_next_proc(struct lpfc_vport *vport, uint16_t fcf_index)
"failover and change port state:x%x/x%x\n",
phba->pport->port_state, LPFC_VPORT_UNKNOWN);
phba->pport->port_state = LPFC_VPORT_UNKNOWN;
+
+ if (!phba->fcf.fcf_redisc_attempted) {
+ lpfc_unregister_fcf(phba);
+
+ rc = lpfc_sli4_redisc_fcf_table(phba);
+ if (!rc) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
+ "3195 Rediscover FCF table\n");
+ phba->fcf.fcf_redisc_attempted = 1;
+ lpfc_sli4_clear_fcf_rr_bmask(phba);
+ } else {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
+ "3196 Rediscover FCF table "
+ "failed. Status:x%x\n", rc);
+ }
+ } else {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
+ "3197 Already rediscover FCF table "
+ "attempted. No more retry\n");
+ }
goto stop_flogi_current_fcf;
} else {
lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_ELS,
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 9acb5b44ce4c1..a7d3e532e0f58 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -5044,7 +5044,7 @@ lpfc_sli4_async_fip_evt(struct lpfc_hba *phba,
break;
}
/* If fast FCF failover rescan event is pending, do nothing */
- if (phba->fcf.fcf_flag & FCF_REDISC_EVT) {
+ if (phba->fcf.fcf_flag & (FCF_REDISC_EVT | FCF_REDISC_PEND)) {
spin_unlock_irq(&phba->hbalock);
break;
}
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index a490e63c94b67..210c05da64b47 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -18435,15 +18435,8 @@ lpfc_sli4_fcf_rr_next_index_get(struct lpfc_hba *phba)
goto initial_priority;
lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
"2844 No roundrobin failover FCF available\n");
- if (next_fcf_index >= LPFC_SLI4_FCF_TBL_INDX_MAX)
- return LPFC_FCOE_FCF_NEXT_NONE;
- else {
- lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
- "3063 Only FCF available idx %d, flag %x\n",
- next_fcf_index,
- phba->fcf.fcf_pri[next_fcf_index].fcf_rec.flag);
- return next_fcf_index;
- }
+
+ return LPFC_FCOE_FCF_NEXT_NONE;
}
if (next_fcf_index < LPFC_SLI4_FCF_TBL_INDX_MAX &&
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 399c0015c5465..3dcc6615a23b2 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -279,6 +279,7 @@ struct lpfc_fcf {
#define FCF_REDISC_EVT 0x100 /* FCF rediscovery event to worker thread */
#define FCF_REDISC_FOV 0x200 /* Post FCF rediscovery fast failover */
#define FCF_REDISC_PROG (FCF_REDISC_PEND | FCF_REDISC_EVT)
+ uint16_t fcf_redisc_attempted;
uint32_t addr_mode;
uint32_t eligible_fcf_cnt;
struct lpfc_fcf_rec current_rec;
--
2.20.1
From: Ernesto A. Fernández <[email protected]>
[ Upstream commit 54640c7502e5ed41fbf4eedd499e85f9acc9698f ]
Inserting a new record in a btree may require splitting several of its
nodes. If we hit ENOSPC halfway through, the new nodes will be left
orphaned and their records will be lost. This could mean lost inodes or
extents.
Henceforth, check the available disk space before making any changes.
This still leaves the potential problem of corruption on ENOMEM.
There is no need to reserve space before deleting a catalog record, as we
do for hfsplus. This difference is because hfs index nodes have fixed
length keys.
Link: http://lkml.kernel.org/r/ab5fc8a7d5ffccfd5f27b1cf2cb4ceb6c110da74.1536269131.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/hfs/btree.c | 41 +++++++++++++++++++++++++----------------
fs/hfs/btree.h | 1 +
fs/hfs/catalog.c | 16 ++++++++++++++++
fs/hfs/extent.c | 4 ++++
4 files changed, 46 insertions(+), 16 deletions(-)
diff --git a/fs/hfs/btree.c b/fs/hfs/btree.c
index 9bdff5e406261..19017d2961734 100644
--- a/fs/hfs/btree.c
+++ b/fs/hfs/btree.c
@@ -220,25 +220,17 @@ static struct hfs_bnode *hfs_bmap_new_bmap(struct hfs_bnode *prev, u32 idx)
return node;
}
-struct hfs_bnode *hfs_bmap_alloc(struct hfs_btree *tree)
+/* Make sure @tree has enough space for the @rsvd_nodes */
+int hfs_bmap_reserve(struct hfs_btree *tree, int rsvd_nodes)
{
- struct hfs_bnode *node, *next_node;
- struct page **pagep;
- u32 nidx, idx;
- unsigned off;
- u16 off16;
- u16 len;
- u8 *data, byte, m;
- int i;
-
- while (!tree->free_nodes) {
- struct inode *inode = tree->inode;
- u32 count;
- int res;
+ struct inode *inode = tree->inode;
+ u32 count;
+ int res;
+ while (tree->free_nodes < rsvd_nodes) {
res = hfs_extend_file(inode);
if (res)
- return ERR_PTR(res);
+ return res;
HFS_I(inode)->phys_size = inode->i_size =
(loff_t)HFS_I(inode)->alloc_blocks *
HFS_SB(tree->sb)->alloc_blksz;
@@ -246,9 +238,26 @@ struct hfs_bnode *hfs_bmap_alloc(struct hfs_btree *tree)
tree->sb->s_blocksize_bits;
inode_set_bytes(inode, inode->i_size);
count = inode->i_size >> tree->node_size_shift;
- tree->free_nodes = count - tree->node_count;
+ tree->free_nodes += count - tree->node_count;
tree->node_count = count;
}
+ return 0;
+}
+
+struct hfs_bnode *hfs_bmap_alloc(struct hfs_btree *tree)
+{
+ struct hfs_bnode *node, *next_node;
+ struct page **pagep;
+ u32 nidx, idx;
+ unsigned off;
+ u16 off16;
+ u16 len;
+ u8 *data, byte, m;
+ int i, res;
+
+ res = hfs_bmap_reserve(tree, 1);
+ if (res)
+ return ERR_PTR(res);
nidx = 0;
node = hfs_bnode_find(tree, nidx);
diff --git a/fs/hfs/btree.h b/fs/hfs/btree.h
index c8b252dbb26c0..dcc2aab1b2c43 100644
--- a/fs/hfs/btree.h
+++ b/fs/hfs/btree.h
@@ -82,6 +82,7 @@ struct hfs_find_data {
extern struct hfs_btree *hfs_btree_open(struct super_block *, u32, btree_keycmp);
extern void hfs_btree_close(struct hfs_btree *);
extern void hfs_btree_write(struct hfs_btree *);
+extern int hfs_bmap_reserve(struct hfs_btree *, int);
extern struct hfs_bnode * hfs_bmap_alloc(struct hfs_btree *);
extern void hfs_bmap_free(struct hfs_bnode *node);
diff --git a/fs/hfs/catalog.c b/fs/hfs/catalog.c
index 8a66405b0f8b5..d365bf0b8c77d 100644
--- a/fs/hfs/catalog.c
+++ b/fs/hfs/catalog.c
@@ -97,6 +97,14 @@ int hfs_cat_create(u32 cnid, struct inode *dir, const struct qstr *str, struct i
if (err)
return err;
+ /*
+ * Fail early and avoid ENOSPC during the btree operations. We may
+ * have to split the root node at most once.
+ */
+ err = hfs_bmap_reserve(fd.tree, 2 * fd.tree->depth);
+ if (err)
+ goto err2;
+
hfs_cat_build_key(sb, fd.search_key, cnid, NULL);
entry_size = hfs_cat_build_thread(sb, &entry, S_ISDIR(inode->i_mode) ?
HFS_CDR_THD : HFS_CDR_FTH,
@@ -295,6 +303,14 @@ int hfs_cat_move(u32 cnid, struct inode *src_dir, const struct qstr *src_name,
return err;
dst_fd = src_fd;
+ /*
+ * Fail early and avoid ENOSPC during the btree operations. We may
+ * have to split the root node at most once.
+ */
+ err = hfs_bmap_reserve(src_fd.tree, 2 * src_fd.tree->depth);
+ if (err)
+ goto out;
+
/* find the old dir entry and read the data */
hfs_cat_build_key(sb, src_fd.search_key, src_dir->i_ino, src_name);
err = hfs_brec_find(&src_fd);
diff --git a/fs/hfs/extent.c b/fs/hfs/extent.c
index 5d01826545809..0c638c6121526 100644
--- a/fs/hfs/extent.c
+++ b/fs/hfs/extent.c
@@ -117,6 +117,10 @@ static int __hfs_ext_write_extent(struct inode *inode, struct hfs_find_data *fd)
if (HFS_I(inode)->flags & HFS_FLG_EXT_NEW) {
if (res != -ENOENT)
return res;
+ /* Fail early and avoid ENOSPC during the btree operation */
+ res = hfs_bmap_reserve(fd->tree, fd->tree->depth + 1);
+ if (res)
+ return res;
hfs_brec_insert(fd, HFS_I(inode)->cached_extents, sizeof(hfs_extent_rec));
HFS_I(inode)->flags &= ~(HFS_FLG_EXT_DIRTY|HFS_FLG_EXT_NEW);
} else {
--
2.20.1
From: Ernesto A. Fernández <[email protected]>
[ Upstream commit 839c3a6a5e1fbc8542d581911b35b2cb5cd29304 ]
Direct writes to empty inodes fail with EIO. The generic direct-io code
is in part to blame (a patch has been submitted as "direct-io: allow
direct writes to empty inodes"), but hfsplus is worse affected than the
other filesystems because the fallback to buffered I/O doesn't happen.
The problem is the return value of hfsplus_get_block() when called with
!create. Change it to be more consistent with the other modules.
Link: http://lkml.kernel.org/r/2cd1301404ec7cf1e39c8f11a01a4302f1460ad6.1539195310.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <[email protected]>
Reviewed-by: Vyacheslav Dubeyko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/hfsplus/extents.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/fs/hfsplus/extents.c b/fs/hfsplus/extents.c
index 8a8893d522ef3..a930ddd156819 100644
--- a/fs/hfsplus/extents.c
+++ b/fs/hfsplus/extents.c
@@ -237,7 +237,9 @@ int hfsplus_get_block(struct inode *inode, sector_t iblock,
ablock = iblock >> sbi->fs_shift;
if (iblock >= hip->fs_blocks) {
- if (iblock > hip->fs_blocks || !create)
+ if (!create)
+ return 0;
+ if (iblock > hip->fs_blocks)
return -EIO;
if (ablock >= hip->alloc_blocks) {
res = hfsplus_file_extend(inode, false);
--
2.20.1
From: Mike Manning <[email protected]>
[ Upstream commit 6f12fa775530195a501fb090d092c637f32d0cc5 ]
The skb for packets that are multicast or to a link-local address are
not marked as being enslaved to a VRF, if they are received on a socket
bound to the VRF. This is needed for ND and it is preferable for the
kernel not to have to deal with the additional use-cases if ll or mcast
packets are handled as enslaved. However, this does not allow service
instances listening on unbound and bound to VRF sockets to distinguish
the VRF used, if packets are sent as multicast or to a link-local
address. The fix is for the VRF driver to also mark these skb as being
enslaved to the VRF.
Signed-off-by: Mike Manning <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Tested-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/vrf.c | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)
diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c
index 9f895083bc0aa..7f5ee6bb44300 100644
--- a/drivers/net/vrf.c
+++ b/drivers/net/vrf.c
@@ -993,24 +993,23 @@ static struct sk_buff *vrf_ip6_rcv(struct net_device *vrf_dev,
struct sk_buff *skb)
{
int orig_iif = skb->skb_iif;
- bool need_strict;
+ bool need_strict = rt6_need_strict(&ipv6_hdr(skb)->daddr);
+ bool is_ndisc = ipv6_ndisc_frame(skb);
- /* loopback traffic; do not push through packet taps again.
- * Reset pkt_type for upper layers to process skb
+ /* loopback, multicast & non-ND link-local traffic; do not push through
+ * packet taps again. Reset pkt_type for upper layers to process skb
*/
- if (skb->pkt_type == PACKET_LOOPBACK) {
+ if (skb->pkt_type == PACKET_LOOPBACK || (need_strict && !is_ndisc)) {
skb->dev = vrf_dev;
skb->skb_iif = vrf_dev->ifindex;
IP6CB(skb)->flags |= IP6SKB_L3SLAVE;
- skb->pkt_type = PACKET_HOST;
+ if (skb->pkt_type == PACKET_LOOPBACK)
+ skb->pkt_type = PACKET_HOST;
goto out;
}
- /* if packet is NDISC or addressed to multicast or link-local
- * then keep the ingress interface
- */
- need_strict = rt6_need_strict(&ipv6_hdr(skb)->daddr);
- if (!ipv6_ndisc_frame(skb) && !need_strict) {
+ /* if packet is NDISC then keep the ingress interface */
+ if (!is_ndisc) {
vrf_rx_stats(vrf_dev, skb->len);
skb->dev = vrf_dev;
skb->skb_iif = vrf_dev->ifindex;
--
2.20.1
From: Colin Ian King <[email protected]>
[ Upstream commit f8ddf49b420112e28bdd23d7ad52d7991a0ccbe3 ]
Fix warnings found using static analysis with cppcheck, use %d printf
format specifier for signed ints rather than %u
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Erik Schmauss <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/power/acpi/tools/acpidump/apmain.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/power/acpi/tools/acpidump/apmain.c b/tools/power/acpi/tools/acpidump/apmain.c
index db213171f8d99..2d9b94b631cb9 100644
--- a/tools/power/acpi/tools/acpidump/apmain.c
+++ b/tools/power/acpi/tools/acpidump/apmain.c
@@ -106,7 +106,7 @@ static int ap_insert_action(char *argument, u32 to_be_done)
current_action++;
if (current_action > AP_MAX_ACTIONS) {
- fprintf(stderr, "Too many table options (max %u)\n",
+ fprintf(stderr, "Too many table options (max %d)\n",
AP_MAX_ACTIONS);
return (-1);
}
--
2.20.1
From: Ernesto A. Fernández <[email protected]>
[ Upstream commit 1267a07be5ebbff2d2739290f3d043ae137c15b4 ]
Direct writes to empty inodes fail with EIO. The generic direct-io code
is in part to blame (a patch has been submitted as "direct-io: allow
direct writes to empty inodes"), but hfs is worse affected than the other
filesystems because the fallback to buffered I/O doesn't happen.
The problem is the return value of hfs_get_block() when called with
!create. Change it to be more consistent with the other modules.
Link: http://lkml.kernel.org/r/4538ab8c35ea37338490525f0f24cbc37227528c.1539195310.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <[email protected]>
Reviewed-by: Vyacheslav Dubeyko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/hfs/extent.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/fs/hfs/extent.c b/fs/hfs/extent.c
index 0c638c6121526..5f1ff97a3b987 100644
--- a/fs/hfs/extent.c
+++ b/fs/hfs/extent.c
@@ -345,7 +345,9 @@ int hfs_get_block(struct inode *inode, sector_t block,
ablock = (u32)block / HFS_SB(sb)->fs_div;
if (block >= HFS_I(inode)->fs_blocks) {
- if (block > HFS_I(inode)->fs_blocks || !create)
+ if (!create)
+ return 0;
+ if (block > HFS_I(inode)->fs_blocks)
return -EIO;
if (ablock >= HFS_I(inode)->alloc_blocks) {
res = hfs_extend_file(inode);
--
2.20.1
From: zhong jiang <[email protected]>
[ Upstream commit d2ab99403ee00d8014e651728a4702ea1ae5e52c ]
When adding the memory by probing memory block in sysfs interface, there is an
obvious issue that we will unlock the device_hotplug_lock when fails to takes it.
That issue was introduced in Commit 8df1d0e4a265
("mm/memory_hotplug: make add_memory() take the device_hotplug_lock")
We should drop out in time when fails to take the device_hotplug_lock.
Fixes: 8df1d0e4a265 ("mm/memory_hotplug: make add_memory() take the device_hotplug_lock")
Reported-by: Yang yingliang <[email protected]>
Signed-off-by: zhong jiang <[email protected]>
Reviewed-by: Oscar Salvador <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/base/memory.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index 0f8e77f78cc80..ac1574a696100 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -510,7 +510,7 @@ memory_probe_store(struct device *dev, struct device_attribute *attr,
ret = lock_device_hotplug_sysfs();
if (ret)
- goto out;
+ return ret;
nid = memory_add_physaddr_to_nid(phys_addr);
ret = __add_memory(nid, phys_addr,
--
2.20.1
From: David Ahern <[email protected]>
[ Upstream commit c2027d1e17582903e368abf5d4838b22a98f2b7b ]
A recent commit allows sockets bound to a VRF to receive ipv6 link local
packets. However, it only works for UDP and worse TCP connection attempts
to the LLA with the only listener bound to the VRF just hang where as
before the client gets a reset and connection refused. Fix by adjusting
ir_iif for LL addresses and packets received through a device enslaved
to a VRF.
Fixes: 6f12fa775530 ("vrf: mark skb for multicast or link-local as enslaved to VRF")
Reported-by: Donald Sharp <[email protected]>
Cc: Mike Manning <[email protected]>
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv6/tcp_ipv6.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index e7cdfa92c3820..9a117a79af659 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -734,6 +734,7 @@ static void tcp_v6_init_req(struct request_sock *req,
const struct sock *sk_listener,
struct sk_buff *skb)
{
+ bool l3_slave = ipv6_l3mdev_skb(TCP_SKB_CB(skb)->header.h6.flags);
struct inet_request_sock *ireq = inet_rsk(req);
const struct ipv6_pinfo *np = inet6_sk(sk_listener);
@@ -741,7 +742,7 @@ static void tcp_v6_init_req(struct request_sock *req,
ireq->ir_v6_loc_addr = ipv6_hdr(skb)->daddr;
/* So that link locals have meaning */
- if (!sk_listener->sk_bound_dev_if &&
+ if ((!sk_listener->sk_bound_dev_if || l3_slave) &&
ipv6_addr_type(&ireq->ir_v6_rmt_addr) & IPV6_ADDR_LINKLOCAL)
ireq->ir_iif = tcp_v6_iif(skb);
--
2.20.1
From: Colin Ian King <[email protected]>
[ Upstream commit 6c9a3f843a29d6894dfc40df338b91dbd78f0ae3 ]
Currently extent and index i are both being incremented causing an array
out of bounds read on extent[i]. Fix this by removing the extraneous
increment of extent.
Ernesto said:
: This is only triggered when deleting a file with a resource fork. I
: may be wrong because the documentation isn't clear, but I don't think
: you can create those under linux. So I guess nobody was testing them.
:
: > A disk space leak, perhaps?
:
: That's what it looks like in general. hfs_free_extents() won't do
: anything if the block count doesn't add up, and the error will be
: ignored. Now, if the block count randomly does add up, we could see
: some corruption.
Detected by CoverityScan, CID#711541 ("Out of bounds read")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Colin Ian King <[email protected]>
Reviewed-by: Ernesto A. Fernndez <[email protected]>
Cc: David Howells <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Hin-Tak Leung <[email protected]>
Cc: Vyacheslav Dubeyko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/hfs/extent.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/hfs/extent.c b/fs/hfs/extent.c
index 5f1ff97a3b987..263d5028d9d18 100644
--- a/fs/hfs/extent.c
+++ b/fs/hfs/extent.c
@@ -304,7 +304,7 @@ int hfs_free_fork(struct super_block *sb, struct hfs_cat_file *file, int type)
return 0;
blocks = 0;
- for (i = 0; i < 3; extent++, i++)
+ for (i = 0; i < 3; i++)
blocks += be16_to_cpu(extent[i].count);
res = hfs_free_extents(sb, extent, blocks, blocks);
--
2.20.1
From: Ernesto A. Fernández <[email protected]>
[ Upstream commit 8cd3cb5061730af085a3f9890a3352f162b4e20c ]
The vfs takes care of updating mtime on ftruncate(), but on truncate() it
must be done by the module.
Link: http://lkml.kernel.org/r/e1611eda2985b672ed2d8677350b4ad8c2d07e8a.1539316825.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <[email protected]>
Reviewed-by: Vyacheslav Dubeyko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/hfs/inode.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c
index a2dfa1b2a89c7..da243c84e93b0 100644
--- a/fs/hfs/inode.c
+++ b/fs/hfs/inode.c
@@ -642,6 +642,8 @@ int hfs_inode_setattr(struct dentry *dentry, struct iattr * attr)
truncate_setsize(inode, attr->ia_size);
hfs_file_truncate(inode);
+ inode->i_atime = inode->i_mtime = inode->i_ctime =
+ current_time(inode);
}
setattr_copy(inode, attr);
--
2.20.1
From: David Hildenbrand <[email protected]>
[ Upstream commit cec1680591d6d5b10ecc10f370210089416e98af ]
device_online() should be called with device_hotplug_lock() held.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: David Hildenbrand <[email protected]>
Reviewed-by: Pavel Tatashin <[email protected]>
Reviewed-by: Rashmica Gupta <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Rashmica Gupta <[email protected]>
Cc: Balbir Singh <[email protected]>
Cc: Michael Neuling <[email protected]>
Cc: Boris Ostrovsky <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Haiyang Zhang <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: John Allen <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: "K. Y. Srinivasan" <[email protected]>
Cc: Len Brown <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Mathieu Malaterre <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Nathan Fontenot <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Cc: Rafael J. Wysocki <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Stephen Hemminger <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: YASUAKI ISHIMATSU <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/powernv/memtrace.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/powerpc/platforms/powernv/memtrace.c b/arch/powerpc/platforms/powernv/memtrace.c
index 232bf5987f91d..dd3cc4632b9ae 100644
--- a/arch/powerpc/platforms/powernv/memtrace.c
+++ b/arch/powerpc/platforms/powernv/memtrace.c
@@ -244,9 +244,11 @@ static int memtrace_online(void)
* we need to online the memory ourselves.
*/
if (!memhp_auto_online) {
+ lock_device_hotplug();
walk_memory_range(PFN_DOWN(ent->start),
PFN_UP(ent->start + ent->size - 1),
NULL, online_mem_block);
+ unlock_device_hotplug();
}
/*
--
2.20.1
From: Jacob Keller <[email protected]>
[ Upstream commit e330af788998b0de4da4f5bd7ddd087507999800 ]
VF drivers can trigger PCIe completer aborts any time they read a queue
that they don't own. Even in nominal circumstances, it is not possible
to prevent the VF driver from reading queues it doesn't own. VF drivers
may attempt to read queues it previously owned, but which it no longer
does due to a PF reset.
Normally these completer aborts aren't an issue. However, on some
platforms these trigger machine check errors. This is true even if we
lower their severity from fatal to non-fatal. Indeed, we already have
code for lowering the severity.
We could attempt to mask these errors conditionally around resets, which
is the most common time they would occur. However this would essentially
be a race between the PF and VF drivers, and we may still occasionally
see machine check exceptions on these strictly configured platforms.
Instead, mask the errors entirely any time we resume VFs. By doing so,
we prevent the completer aborts from being sent to the parent PCIe
device, and thus these strict platforms will not upgrade them into
machine check errors.
Additionally, we don't lose any information by masking these errors,
because we'll still report VFs which attempt to access queues via the
FUM_BAD_VF_QACCESS errors.
Without this change, on platforms where completer aborts cause machine
check exceptions, the VF reading queues it doesn't own could crash the
host system. Masking the completer abort prevents this, so we should
mask it for good, and not just around a PCIe reset. Otherwise malicious
or misconfigured VFs could cause the host system to crash.
Because we are masking the error entirely, there is little reason to
also keep setting the severity bit, so that code is also removed.
Signed-off-by: Jacob Keller <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/fm10k/fm10k_iov.c | 48 ++++++++++++--------
1 file changed, 28 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_iov.c b/drivers/net/ethernet/intel/fm10k/fm10k_iov.c
index e707d717012fa..618032612f52d 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_iov.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_iov.c
@@ -302,6 +302,28 @@ void fm10k_iov_suspend(struct pci_dev *pdev)
}
}
+static void fm10k_mask_aer_comp_abort(struct pci_dev *pdev)
+{
+ u32 err_mask;
+ int pos;
+
+ pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
+ if (!pos)
+ return;
+
+ /* Mask the completion abort bit in the ERR_UNCOR_MASK register,
+ * preventing the device from reporting these errors to the upstream
+ * PCIe root device. This avoids bringing down platforms which upgrade
+ * non-fatal completer aborts into machine check exceptions. Completer
+ * aborts can occur whenever a VF reads a queue it doesn't own.
+ */
+ pci_read_config_dword(pdev, pos + PCI_ERR_UNCOR_MASK, &err_mask);
+ err_mask |= PCI_ERR_UNC_COMP_ABORT;
+ pci_write_config_dword(pdev, pos + PCI_ERR_UNCOR_MASK, err_mask);
+
+ mmiowb();
+}
+
int fm10k_iov_resume(struct pci_dev *pdev)
{
struct fm10k_intfc *interface = pci_get_drvdata(pdev);
@@ -317,6 +339,12 @@ int fm10k_iov_resume(struct pci_dev *pdev)
if (!iov_data)
return -ENOMEM;
+ /* Lower severity of completer abort error reporting as
+ * the VFs can trigger this any time they read a queue
+ * that they don't own.
+ */
+ fm10k_mask_aer_comp_abort(pdev);
+
/* allocate hardware resources for the VFs */
hw->iov.ops.assign_resources(hw, num_vfs, num_vfs);
@@ -460,20 +488,6 @@ void fm10k_iov_disable(struct pci_dev *pdev)
fm10k_iov_free_data(pdev);
}
-static void fm10k_disable_aer_comp_abort(struct pci_dev *pdev)
-{
- u32 err_sev;
- int pos;
-
- pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
- if (!pos)
- return;
-
- pci_read_config_dword(pdev, pos + PCI_ERR_UNCOR_SEVER, &err_sev);
- err_sev &= ~PCI_ERR_UNC_COMP_ABORT;
- pci_write_config_dword(pdev, pos + PCI_ERR_UNCOR_SEVER, err_sev);
-}
-
int fm10k_iov_configure(struct pci_dev *pdev, int num_vfs)
{
int current_vfs = pci_num_vf(pdev);
@@ -495,12 +509,6 @@ int fm10k_iov_configure(struct pci_dev *pdev, int num_vfs)
/* allocate VFs if not already allocated */
if (num_vfs && num_vfs != current_vfs) {
- /* Disable completer abort error reporting as
- * the VFs can trigger this any time they read a queue
- * that they don't own.
- */
- fm10k_disable_aer_comp_abort(pdev);
-
err = pci_enable_sriov(pdev, num_vfs);
if (err) {
dev_err(&pdev->dev,
--
2.20.1
From: Huazhong Tan <[email protected]>
[ Upstream commit 1c12493809924deda6c0834cb2f2c5a6dc786390 ]
When there is a PHY, the driver needs to complete some operations through
MDIO during reset reinitialization, so HCLGE_STATE_CMD_DISABLE is more
suitable than HCLGE_STATE_RST_HANDLING to prevent the MDIO operation from
being sent during the hardware reset.
Fixes: b50ae26c57cb ("net: hns3: never send command queue message to IMP when reset)
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index 398971a062f47..03491e8ebb730 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -54,7 +54,7 @@ static int hclge_mdio_write(struct mii_bus *bus, int phyid, int regnum,
struct hclge_desc desc;
int ret;
- if (test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state))
+ if (test_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state))
return 0;
hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MDIO_CONFIG, false);
@@ -92,7 +92,7 @@ static int hclge_mdio_read(struct mii_bus *bus, int phyid, int regnum)
struct hclge_desc desc;
int ret;
- if (test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state))
+ if (test_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state))
return 0;
hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MDIO_CONFIG, true);
--
2.20.1
From: Leonard Crestez <[email protected]>
[ Upstream commit 1ad9fb750a104f51851c092edd7b3553f0218428 ]
Bindings for "fixed-regulator" only explicitly support "gpio" property,
not "gpios". Fix by correcting the property name.
The enet PHYs on imx6sx-sdb needs to be explicitly reset after a power
cycle, this can be handled by the phy-reset-gpios property. Sadly this
is not handled on suspend: the fec driver turns phy-supply off but
doesn't assert phy-reset-gpios again on resume.
Since additional phy-level work is required to support powering off the
phy in suspend fix the problem by just marking the regulator as
"boot-on" "always-on" so that it's never turned off. This behavior is
equivalent to older releases.
Keep the phy-reset-gpios property on fec anyway because it is a correct
description of board design.
This issue was exposed by commit efdfeb079cc3 ("regulator: fixed:
Convert to use GPIO descriptor only") which causes the "gpios" property
to also be parsed. Before that commit the "gpios" property had no
effect, PHY reset was only handled in the the bootloader.
This fixes linux-next boot failures previously reported here:
https://lore.kernel.org/patchwork/patch/982437/#1177900
https://lore.kernel.org/patchwork/patch/994091/#1178304
Signed-off-by: Leonard Crestez <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/imx6sx-sdb.dtsi | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index f8f31872fa144..d6d517e4922ff 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -115,7 +115,9 @@
regulator-name = "enet_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+ regulator-boot-on;
+ regulator-always-on;
};
reg_pcie_gpio: regulator-pcie-gpio {
@@ -178,6 +180,7 @@
phy-supply = <®_enet_3v3>;
phy-mode = "rgmii";
phy-handle = <ðphy1>;
+ phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
status = "okay";
mdio {
@@ -371,6 +374,8 @@
MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91
+ /* phy reset */
+ MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0x10b0
>;
};
--
2.20.1
From: Brian Norris <[email protected]>
[ Upstream commit 82e60d920e8ad70cd9a280ab156566755f1fe4aa ]
Similar to regulator error handling, we should only start tearing down
the 'i - 1' clock when clock 'i' fails to enable. Otherwise, we might
end up with an unbalanced clock, where we never successfully enabled the
clock, but we try to disable it anyway.
Fixes: a6a793f98786 ("ath10k: vote for hardware resources for WCN3990")
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath10k/snoc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index fa1843a7e0fda..e2d78f77edb70 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -1190,7 +1190,7 @@ static int ath10k_wcn3990_clk_init(struct ath10k *ar)
return 0;
err_clock_config:
- for (; i >= 0; i--) {
+ for (i = i - 1; i >= 0; i--) {
clk_info = &ar_snoc->clk[i];
if (!clk_info->handle)
--
2.20.1
From: "Gustavo A. R. Silva" <[email protected]>
[ Upstream commit 307b00c5e695857ca92fc6a4b8ab6c48f988a1b1 ]
Add missing break statement in order to prevent the code from falling
through to the default case.
Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 505ab1b055ff4..2b4fcdf4ec5bb 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -5691,6 +5691,7 @@ static int rtl8xxxu_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
break;
case WLAN_CIPHER_SUITE_TKIP:
key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+ break;
default:
return -EOPNOTSUPP;
}
--
2.20.1
From: Shivasharan S <[email protected]>
[ Upstream commit 9155cf30a3c4ef97e225d6daddf9bd4b173267e8 ]
In megasas_transition_to_ready() driver waits 180seconds for controller to
change FW state. Here we are calling msleep(1) in a loop for this. As
explained in timers-howto.txt, msleep(1) will actually sleep longer than
1ms. If a faulty controller is connected, we will end up waiting for much
more than 180 seconds causing unnecessary delays during load.
Change the granularity of msleep() call from 1ms to 1000ms.
Signed-off-by: Shivasharan S <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/megaraid/megaraid_sas_base.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index bc37666f998e6..2f94ab9c23540 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -3894,12 +3894,12 @@ megasas_transition_to_ready(struct megasas_instance *instance, int ocr)
/*
* The cur_state should not last for more than max_wait secs
*/
- for (i = 0; i < (max_wait * 1000); i++) {
+ for (i = 0; i < max_wait; i++) {
curr_abs_state = instance->instancet->
read_fw_status_reg(instance->reg_set);
if (abs_state == curr_abs_state) {
- msleep(1);
+ msleep(1000);
} else
break;
}
--
2.20.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit cd8a145a066a1a3beb0ae615c7cb2ee4217418d7 ]
Clang warns when one enumerated type is implicitly converted to another:
drivers/pinctrl/pinctrl-zynq.c:985:18: warning: implicit conversion from
enumeration type 'enum zynq_pin_config_param' to different enumeration
type 'enum pin_config_param' [-Wenum-conversion]
{"io-standard", PIN_CONFIG_IOSTANDARD, zynq_iostd_lvcmos18},
~ ^~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/pinctrl-zynq.c:990:16: warning: implicit conversion from
enumeration type 'enum zynq_pin_config_param' to different enumeration
type 'enum pin_config_param' [-Wenum-conversion]
= { PCONFDUMP(PIN_CONFIG_IOSTANDARD, "IO-standard", NULL, true),
~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from
macro 'PCONFDUMP'
.param = a, .display = b, .format = c, .has_arg = d \
^
2 warnings generated.
It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.
Signed-off-by: Nathan Chancellor <[email protected]>
Acked-by: Michal Simek <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/pinctrl-zynq.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-zynq.c b/drivers/pinctrl/pinctrl-zynq.c
index a0daf27042bd0..90fd37e8207bf 100644
--- a/drivers/pinctrl/pinctrl-zynq.c
+++ b/drivers/pinctrl/pinctrl-zynq.c
@@ -971,15 +971,12 @@ enum zynq_io_standards {
zynq_iostd_max
};
-/**
- * enum zynq_pin_config_param - possible pin configuration parameters
- * @PIN_CONFIG_IOSTANDARD: if the pin can select an IO standard, the argument to
+/*
+ * PIN_CONFIG_IOSTANDARD: if the pin can select an IO standard, the argument to
* this parameter (on a custom format) tells the driver which alternative
* IO standard to use.
*/
-enum zynq_pin_config_param {
- PIN_CONFIG_IOSTANDARD = PIN_CONFIG_END + 1,
-};
+#define PIN_CONFIG_IOSTANDARD (PIN_CONFIG_END + 1)
static const struct pinconf_generic_params zynq_dt_params[] = {
{"io-standard", PIN_CONFIG_IOSTANDARD, zynq_iostd_lvcmos18},
--
2.20.1
From: Johannes Berg <[email protected]>
[ Upstream commit e005bd7ddea06784c1eb91ac5bb6b171a94f3b05 ]
Since we now prevent regulatory restore during STA disconnect
if concurrent AP interfaces are active, we need to reschedule
this check when the AP state changes. This fixes never doing
a restore when an AP is the last interface to stop. Or to put
it another way: we need to re-check after anything we check
here changes.
Cc: [email protected]
Fixes: 113f3aaa81bd ("cfg80211: Prevent regulatory restore during STA disconnect in concurrent interfaces")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/wireless/ap.c | 2 ++
net/wireless/core.h | 2 ++
net/wireless/sme.c | 2 +-
3 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/net/wireless/ap.c b/net/wireless/ap.c
index 882d97bdc6bfd..550ac9d827fe7 100644
--- a/net/wireless/ap.c
+++ b/net/wireless/ap.c
@@ -41,6 +41,8 @@ int __cfg80211_stop_ap(struct cfg80211_registered_device *rdev,
cfg80211_sched_dfs_chan_update(rdev);
}
+ schedule_work(&cfg80211_disconnect_work);
+
return err;
}
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 7f52ef5693203..f5d58652108dd 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -430,6 +430,8 @@ void cfg80211_process_wdev_events(struct wireless_dev *wdev);
bool cfg80211_does_bw_fit_range(const struct ieee80211_freq_range *freq_range,
u32 center_freq_khz, u32 bw_khz);
+extern struct work_struct cfg80211_disconnect_work;
+
/**
* cfg80211_chandef_dfs_usable - checks if chandef is DFS usable
* @wiphy: the wiphy to validate against
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index c7047c7b4e80f..07c2196e9d573 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -667,7 +667,7 @@ static void disconnect_work(struct work_struct *work)
rtnl_unlock();
}
-static DECLARE_WORK(cfg80211_disconnect_work, disconnect_work);
+DECLARE_WORK(cfg80211_disconnect_work, disconnect_work);
/*
--
2.20.1
From: Masahiro Yamada <[email protected]>
[ Upstream commit c2a653deaa81f5a750c0dfcbaf9f8e5195cbe4a5 ]
I was totally screwed up in commit eaba68785c2d ("i2c: uniphier-f:
fix race condition when IRQ is cleared"). Since that commit, if the
number of read bytes is multiple of the FIFO size (8, 16, 24... bytes),
the STOP condition could be issued twice, depending on the timing.
If this happens, the controller will go wrong, resulting in the timeout
error.
It was more than 3 years ago when I wrote this driver, so my memory
about this hardware was vague. Please let me correct the description
in the commit log of eaba68785c2d.
Clearing the IRQ status on exiting the IRQ handler is absolutely
fine. This controller makes a pause while any IRQ status is asserted.
If the IRQ status is cleared first, the hardware may start the next
transaction before the IRQ handler finishes what it supposed to do.
This partially reverts the bad commit with clear comments so that I
will never repeat this mistake.
I also investigated what is happening at the last moment of the read
mode. The UNIPHIER_FI2C_INT_RF interrupt is asserted a bit earlier
(by half a period of the clock cycle) than UNIPHIER_FI2C_INT_RB.
I consulted a hardware engineer, and I got the following information:
UNIPHIER_FI2C_INT_RF
asserted at the falling edge of SCL at the 8th bit.
UNIPHIER_FI2C_INT_RB
asserted at the rising edge of SCL at the 9th (ACK) bit.
In order to avoid calling uniphier_fi2c_stop() twice, check the latter
interrupt. I also commented this because it is obscure hardware internal.
Fixes: eaba68785c2d ("i2c: uniphier-f: fix race condition when IRQ is cleared")
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-uniphier-f.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c
index 928ea9930d17e..dd0687e36a47b 100644
--- a/drivers/i2c/busses/i2c-uniphier-f.c
+++ b/drivers/i2c/busses/i2c-uniphier-f.c
@@ -173,8 +173,6 @@ static irqreturn_t uniphier_fi2c_interrupt(int irq, void *dev_id)
"interrupt: enabled_irqs=%04x, irq_status=%04x\n",
priv->enabled_irqs, irq_status);
- uniphier_fi2c_clear_irqs(priv, irq_status);
-
if (irq_status & UNIPHIER_FI2C_INT_STOP)
goto complete;
@@ -214,7 +212,13 @@ static irqreturn_t uniphier_fi2c_interrupt(int irq, void *dev_id)
if (irq_status & (UNIPHIER_FI2C_INT_RF | UNIPHIER_FI2C_INT_RB)) {
uniphier_fi2c_drain_rxfifo(priv);
- if (!priv->len)
+ /*
+ * If the number of bytes to read is multiple of the FIFO size
+ * (msg->len == 8, 16, 24, ...), the INT_RF bit is set a little
+ * earlier than INT_RB. We wait for INT_RB to confirm the
+ * completion of the current message.
+ */
+ if (!priv->len && (irq_status & UNIPHIER_FI2C_INT_RB))
goto data_done;
if (unlikely(priv->flags & UNIPHIER_FI2C_MANUAL_NACK)) {
@@ -253,6 +257,13 @@ static irqreturn_t uniphier_fi2c_interrupt(int irq, void *dev_id)
}
handled:
+ /*
+ * This controller makes a pause while any bit of the IRQ status is
+ * asserted. Clear the asserted bit to kick the controller just before
+ * exiting the handler.
+ */
+ uniphier_fi2c_clear_irqs(priv, irq_status);
+
spin_unlock(&priv->lock);
return IRQ_HANDLED;
--
2.20.1
From: Kishon Vijay Abraham I <[email protected]>
[ Upstream commit 148e340c0696369fadbbddc8f4bef801ed247d71 ]
PCI controller in K2G also has a limitation that memory read request
size (MRRS) must not exceed 256 bytes. Use the quirk to limit MRRS
(added for K2HK, K2L and K2E) for K2G as well.
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/dwc/pci-keystone.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 5e199e7d2d4fd..765357b87ff69 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -36,6 +36,7 @@
#define PCIE_RC_K2HK 0xb008
#define PCIE_RC_K2E 0xb009
#define PCIE_RC_K2L 0xb00a
+#define PCIE_RC_K2G 0xb00b
#define to_keystone_pcie(x) dev_get_drvdata((x)->dev)
@@ -50,6 +51,8 @@ static void quirk_limit_mrrs(struct pci_dev *dev)
.class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCIE_RC_K2L),
.class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
+ { PCI_DEVICE(PCI_VENDOR_ID_TI, PCIE_RC_K2G),
+ .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
{ 0, },
};
--
2.20.1
From: Quentin Monnet <[email protected]>
[ Upstream commit f120919f9905a2cad9dea792a28a11fb623f72c1 ]
Function open_obj_pinned() prints error messages when it fails to open a
link in the BPF virtual file system. However, in some occasions it is
not desirable to print an error, for example when we parse all links
under the bpffs root, and the error is due to some paths actually being
symbolic links.
Example output:
# ls -l /sys/fs/bpf/
lrwxrwxrwx 1 root root 0 Oct 18 19:00 ip -> /sys/fs/bpf/tc/
drwx------ 3 root root 0 Oct 18 19:00 tc
lrwxrwxrwx 1 root root 0 Oct 18 19:00 xdp -> /sys/fs/bpf/tc/
# bpftool --bpffs prog show
Error: bpf obj get (/sys/fs/bpf): Permission denied
Error: bpf obj get (/sys/fs/bpf): Permission denied
# strace -e bpf bpftool --bpffs prog show
bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/ip", bpf_fd=0}, 72) = -1 EACCES (Permission denied)
Error: bpf obj get (/sys/fs/bpf): Permission denied
bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/xdp", bpf_fd=0}, 72) = -1 EACCES (Permission denied)
Error: bpf obj get (/sys/fs/bpf): Permission denied
...
To fix it, pass a bool as a second argument to the function, and prevent
it from printing an error when the argument is set to true.
Signed-off-by: Quentin Monnet <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/bpf/bpftool/common.c | 15 ++++++++-------
tools/bpf/bpftool/main.h | 2 +-
2 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/tools/bpf/bpftool/common.c b/tools/bpf/bpftool/common.c
index be7aebff0c1e5..158469f57461d 100644
--- a/tools/bpf/bpftool/common.c
+++ b/tools/bpf/bpftool/common.c
@@ -130,16 +130,17 @@ static int mnt_bpffs(const char *target, char *buff, size_t bufflen)
return 0;
}
-int open_obj_pinned(char *path)
+int open_obj_pinned(char *path, bool quiet)
{
int fd;
fd = bpf_obj_get(path);
if (fd < 0) {
- p_err("bpf obj get (%s): %s", path,
- errno == EACCES && !is_bpffs(dirname(path)) ?
- "directory not in bpf file system (bpffs)" :
- strerror(errno));
+ if (!quiet)
+ p_err("bpf obj get (%s): %s", path,
+ errno == EACCES && !is_bpffs(dirname(path)) ?
+ "directory not in bpf file system (bpffs)" :
+ strerror(errno));
return -1;
}
@@ -151,7 +152,7 @@ int open_obj_pinned_any(char *path, enum bpf_obj_type exp_type)
enum bpf_obj_type type;
int fd;
- fd = open_obj_pinned(path);
+ fd = open_obj_pinned(path, false);
if (fd < 0)
return -1;
@@ -384,7 +385,7 @@ int build_pinned_obj_table(struct pinned_obj_table *tab,
while ((ftse = fts_read(fts))) {
if (!(ftse->fts_info & FTS_F))
continue;
- fd = open_obj_pinned(ftse->fts_path);
+ fd = open_obj_pinned(ftse->fts_path, true);
if (fd < 0)
continue;
diff --git a/tools/bpf/bpftool/main.h b/tools/bpf/bpftool/main.h
index 238e734d75b3e..057a227bdb9f9 100644
--- a/tools/bpf/bpftool/main.h
+++ b/tools/bpf/bpftool/main.h
@@ -126,7 +126,7 @@ int cmd_select(const struct cmd *cmds, int argc, char **argv,
int get_fd_type(int fd);
const char *get_fd_type_name(enum bpf_obj_type type);
char *get_fdinfo(int fd, const char *key);
-int open_obj_pinned(char *path);
+int open_obj_pinned(char *path, bool quiet);
int open_obj_pinned_any(char *path, enum bpf_obj_type exp_type);
int do_pin_any(int argc, char **argv, int (*get_fd_by_id)(__u32));
int do_pin_fd(int fd, const char *name);
--
2.20.1
From: Shivasharan S <[email protected]>
[ Upstream commit 8a25fa17b6ed6e6c8101e9c68a10ae68a9025f2c ]
During init, if pci_alloc_irq_vectors() fails, the driver has not yet setup
the IRQs. Fix the goto labels and error handling for this case.
Signed-off-by: Shivasharan S <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/megaraid/megaraid_sas_base.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 2f94ab9c23540..2f31d266339f8 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -5410,7 +5410,7 @@ static int megasas_init_fw(struct megasas_instance *instance)
if (!instance->msix_vectors) {
i = pci_alloc_irq_vectors(instance->pdev, 1, 1, PCI_IRQ_LEGACY);
if (i < 0)
- goto fail_setup_irqs;
+ goto fail_init_adapter;
}
megasas_setup_reply_map(instance);
@@ -5619,9 +5619,8 @@ static int megasas_init_fw(struct megasas_instance *instance)
fail_get_ld_pd_list:
instance->instancet->disable_intr(instance);
-fail_init_adapter:
megasas_destroy_irqs(instance);
-fail_setup_irqs:
+fail_init_adapter:
if (instance->msix_vectors)
pci_free_irq_vectors(instance->pdev);
instance->msix_vectors = 0;
--
2.20.1
From: Suganath Prabu <[email protected]>
[ Upstream commit 9029a72500b95578a35877a43473b82cb0386c53 ]
This is to fix SYNC CACHE and START STOP command failures with
DID_NO_CONNECT during driver unload.
In driver's IO submission patch (i.e. in driver's .queuecommand()) driver
won't allow any SCSI commands to the IOC when ioc->remove_host flag is set
and hence SYNC CACHE commands which are issued to the target drives (where
write cache is enabled) during driver unload time is failed with
DID_NO_CONNECT status.
Now modified the driver to allow SYNC CACHE and START STOP commands to IOC,
even when remove_host flag is set.
Signed-off-by: Suganath Prabu <[email protected]>
Reviewed-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 36 +++++++++++++++++++++++++++-
1 file changed, 35 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 73d661a0ecbb9..d3c944d997039 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -3791,6 +3791,40 @@ _scsih_tm_tr_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
return _scsih_check_for_pending_tm(ioc, smid);
}
+/** _scsih_allow_scmd_to_device - check whether scmd needs to
+ * issue to IOC or not.
+ * @ioc: per adapter object
+ * @scmd: pointer to scsi command object
+ *
+ * Returns true if scmd can be issued to IOC otherwise returns false.
+ */
+inline bool _scsih_allow_scmd_to_device(struct MPT3SAS_ADAPTER *ioc,
+ struct scsi_cmnd *scmd)
+{
+
+ if (ioc->pci_error_recovery)
+ return false;
+
+ if (ioc->hba_mpi_version_belonged == MPI2_VERSION) {
+ if (ioc->remove_host)
+ return false;
+
+ return true;
+ }
+
+ if (ioc->remove_host) {
+
+ switch (scmd->cmnd[0]) {
+ case SYNCHRONIZE_CACHE:
+ case START_STOP:
+ return true;
+ default:
+ return false;
+ }
+ }
+
+ return true;
+}
/**
* _scsih_sas_control_complete - completion routine
@@ -4623,7 +4657,7 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
return 0;
}
- if (ioc->pci_error_recovery || ioc->remove_host) {
+ if (!(_scsih_allow_scmd_to_device(ioc, scmd))) {
scmd->result = DID_NO_CONNECT << 16;
scmd->scsi_done(scmd);
return 0;
--
2.20.1
From: David Barmann <[email protected]>
[ Upstream commit 50254256f382c56bde87d970f3d0d02fdb76ec70 ]
When setting the SO_MARK socket option, if the mark changes, the dst
needs to be reset so that a new route lookup is performed.
This fixes the case where an application wants to change routing by
setting a new sk_mark. If this is done after some packets have already
been sent, the dst is cached and has no effect.
Signed-off-by: David Barmann <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/sock.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/net/core/sock.c b/net/core/sock.c
index ba4f843cdd1d1..948fd687292a6 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -951,10 +951,12 @@ int sock_setsockopt(struct socket *sock, int level, int optname,
clear_bit(SOCK_PASSSEC, &sock->flags);
break;
case SO_MARK:
- if (!ns_capable(sock_net(sk)->user_ns, CAP_NET_ADMIN))
+ if (!ns_capable(sock_net(sk)->user_ns, CAP_NET_ADMIN)) {
ret = -EPERM;
- else
+ } else if (val != sk->sk_mark) {
sk->sk_mark = val;
+ sk_dst_reset(sk);
+ }
break;
case SO_RXQ_OVFL:
--
2.20.1
From: Brian Masney <[email protected]>
[ Upstream commit 149a96047237574b756d872007c006acd0cc6687 ]
When attempting to setup up a gpio hog, device probing would repeatedly
fail with -EPROBE_DEFERED errors. It was caused by a circular dependency
between the gpio and pinctrl frameworks. If the gpio-ranges property is
present in device tree, then the gpio framework will handle the gpio pin
registration and eliminate the circular dependency.
See Christian Lamparter's commit a86caa9ba5d7 ("pinctrl: msm: fix
gpio-hog related boot issues") for a detailed commit message that
explains the issue in much more detail. The code comment in this commit
came from Christian's commit.
Signed-off-by: Brian Masney <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index cf82db78e69e6..0c30f5eb4c714 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -1028,10 +1028,23 @@ static int pmic_gpio_probe(struct platform_device *pdev)
return ret;
}
- ret = gpiochip_add_pin_range(&state->chip, dev_name(dev), 0, 0, npins);
- if (ret) {
- dev_err(dev, "failed to add pin range\n");
- goto err_range;
+ /*
+ * For DeviceTree-supported systems, the gpio core checks the
+ * pinctrl's device node for the "gpio-ranges" property.
+ * If it is present, it takes care of adding the pin ranges
+ * for the driver. In this case the driver can skip ahead.
+ *
+ * In order to remain compatible with older, existing DeviceTree
+ * files which don't set the "gpio-ranges" property or systems that
+ * utilize ACPI the driver has to call gpiochip_add_pin_range().
+ */
+ if (!of_property_read_bool(dev->of_node, "gpio-ranges")) {
+ ret = gpiochip_add_pin_range(&state->chip, dev_name(dev), 0, 0,
+ npins);
+ if (ret) {
+ dev_err(dev, "failed to add pin range\n");
+ goto err_range;
+ }
}
return 0;
--
2.20.1
From: Ali MJ Al-Nasrawy <[email protected]>
[ Upstream commit 96fca788e5788b7ea3b0050eb35a343637e0a465 ]
This message greatly spams the log under heavy Tx of frames with BK access
class which is especially true when operating as AP. It is also not informative
as the "agg'ablity" of TIDs are set once and never change.
Fix this by logging only in debug mode.
Signed-off-by: Ali MJ Al-Nasrawy <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
index 23118207b661e..9657b992f90e1 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
@@ -846,8 +846,8 @@ brcms_ops_ampdu_action(struct ieee80211_hw *hw,
status = brcms_c_aggregatable(wl->wlc, tid);
spin_unlock_bh(&wl->lock);
if (!status) {
- brcms_err(wl->wlc->hw->d11core,
- "START: tid %d is not agg\'able\n", tid);
+ brcms_dbg_ht(wl->wlc->hw->d11core,
+ "START: tid %d is not agg\'able\n", tid);
return -EINVAL;
}
ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
--
2.20.1
From: Ahmad Masri <[email protected]>
[ Upstream commit 84ec040d0fb25197584d28a0dedc355503cd19b9 ]
All wil6210 device memory access should be 4 bytes aligned. In io
blob wil6210 did not force alignment for read function, this caused
alignment fault on some platforms.
Fixing that by accessing all 4 lower bytes and return to host the
requested data.
Signed-off-by: Ahmad Masri <[email protected]>
Signed-off-by: Maya Erez <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wil6210/debugfs.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index 51c3330bc316f..12b8cb698f64d 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -662,10 +662,10 @@ static ssize_t wil_read_file_ioblob(struct file *file, char __user *user_buf,
enum { max_count = 4096 };
struct wil_blob_wrapper *wil_blob = file->private_data;
struct wil6210_priv *wil = wil_blob->wil;
- loff_t pos = *ppos;
+ loff_t aligned_pos, pos = *ppos;
size_t available = wil_blob->blob.size;
void *buf;
- size_t ret;
+ size_t unaligned_bytes, aligned_count, ret;
int rc;
if (test_bit(wil_status_suspending, wil_blob->wil->status) ||
@@ -683,7 +683,12 @@ static ssize_t wil_read_file_ioblob(struct file *file, char __user *user_buf,
if (count > max_count)
count = max_count;
- buf = kmalloc(count, GFP_KERNEL);
+ /* set pos to 4 bytes aligned */
+ unaligned_bytes = pos % 4;
+ aligned_pos = pos - unaligned_bytes;
+ aligned_count = count + unaligned_bytes;
+
+ buf = kmalloc(aligned_count, GFP_KERNEL);
if (!buf)
return -ENOMEM;
@@ -694,9 +699,9 @@ static ssize_t wil_read_file_ioblob(struct file *file, char __user *user_buf,
}
wil_memcpy_fromio_32(buf, (const void __iomem *)
- wil_blob->blob.data + pos, count);
+ wil_blob->blob.data + aligned_pos, aligned_count);
- ret = copy_to_user(user_buf, buf, count);
+ ret = copy_to_user(user_buf, buf + unaligned_bytes, count);
wil_pm_runtime_put(wil);
--
2.20.1
From: Sriram R <[email protected]>
[ Upstream commit 113f3aaa81bd56aba02659786ed65cbd9cb9a6fc ]
Currently when an AP and STA interfaces are active in the same or different
radios, regulatory settings are restored whenever the STA disconnects. This
restores all channel information including dfs states in all radios.
For example, if an AP interface is active in one radio and STA in another,
when radar is detected on the AP interface, the dfs state of the channel
will be changed to UNAVAILABLE. But when the STA interface disconnects,
this issues a regulatory disconnect hint which restores all regulatory
settings in all the radios attached and thereby losing the stored dfs
state on the other radio where the channel was marked as unavailable
earlier. Hence prevent such regulatory restore whenever another active
beaconing interface is present in the same or other radios.
Signed-off-by: Sriram R <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/wireless/sme.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index d536b07582f8c..c7047c7b4e80f 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -642,11 +642,15 @@ static bool cfg80211_is_all_idle(void)
* All devices must be idle as otherwise if you are actively
* scanning some new beacon hints could be learned and would
* count as new regulatory hints.
+ * Also if there is any other active beaconing interface we
+ * need not issue a disconnect hint and reset any info such
+ * as chan dfs state, etc.
*/
list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
wdev_lock(wdev);
- if (wdev->conn || wdev->current_bss)
+ if (wdev->conn || wdev->current_bss ||
+ cfg80211_beaconing_iface_active(wdev))
is_all_idle = false;
wdev_unlock(wdev);
}
--
2.20.1
From: Frank Rowand <[email protected]>
[ Upstream commit eeb07c573ec307c53fe2f6ac6d8d11c261f64006 ]
Callers of of_irq_parse_one() blindly use the pointer args.np
without checking whether of_irq_parse_one() had an error and
thus did not set the value of args.np. Initialize args to
zero so that using the format "%pOF" to show the value of
args.np will show "(null)" when of_irq_parse_one() has an
error. This prevents the dereference of a random value.
Make the same fix for callers of of_parse_phandle_with_args()
and of_parse_phandle_with_args_map().
Reported-by: Guenter Roeck <[email protected]>
Tested-by: Alan Tull <[email protected]>
Signed-off-by: Frank Rowand <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/of/unittest.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index e8997cdb228cb..68f52966bbc04 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -375,6 +375,7 @@ static void __init of_unittest_parse_phandle_with_args(void)
for (i = 0; i < 8; i++) {
bool passed = true;
+ memset(&args, 0, sizeof(args));
rc = of_parse_phandle_with_args(np, "phandle-list",
"#phandle-cells", i, &args);
@@ -428,6 +429,7 @@ static void __init of_unittest_parse_phandle_with_args(void)
}
/* Check for missing list property */
+ memset(&args, 0, sizeof(args));
rc = of_parse_phandle_with_args(np, "phandle-list-missing",
"#phandle-cells", 0, &args);
unittest(rc == -ENOENT, "expected:%i got:%i\n", -ENOENT, rc);
@@ -436,6 +438,7 @@ static void __init of_unittest_parse_phandle_with_args(void)
unittest(rc == -ENOENT, "expected:%i got:%i\n", -ENOENT, rc);
/* Check for missing cells property */
+ memset(&args, 0, sizeof(args));
rc = of_parse_phandle_with_args(np, "phandle-list",
"#phandle-cells-missing", 0, &args);
unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
@@ -444,6 +447,7 @@ static void __init of_unittest_parse_phandle_with_args(void)
unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
/* Check for bad phandle in list */
+ memset(&args, 0, sizeof(args));
rc = of_parse_phandle_with_args(np, "phandle-list-bad-phandle",
"#phandle-cells", 0, &args);
unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
@@ -452,6 +456,7 @@ static void __init of_unittest_parse_phandle_with_args(void)
unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
/* Check for incorrectly formed argument list */
+ memset(&args, 0, sizeof(args));
rc = of_parse_phandle_with_args(np, "phandle-list-bad-args",
"#phandle-cells", 1, &args);
unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
@@ -502,6 +507,7 @@ static void __init of_unittest_parse_phandle_with_args_map(void)
for (i = 0; i < 8; i++) {
bool passed = true;
+ memset(&args, 0, sizeof(args));
rc = of_parse_phandle_with_args_map(np, "phandle-list",
"phandle", i, &args);
@@ -559,21 +565,25 @@ static void __init of_unittest_parse_phandle_with_args_map(void)
}
/* Check for missing list property */
+ memset(&args, 0, sizeof(args));
rc = of_parse_phandle_with_args_map(np, "phandle-list-missing",
"phandle", 0, &args);
unittest(rc == -ENOENT, "expected:%i got:%i\n", -ENOENT, rc);
/* Check for missing cells,map,mask property */
+ memset(&args, 0, sizeof(args));
rc = of_parse_phandle_with_args_map(np, "phandle-list",
"phandle-missing", 0, &args);
unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
/* Check for bad phandle in list */
+ memset(&args, 0, sizeof(args));
rc = of_parse_phandle_with_args_map(np, "phandle-list-bad-phandle",
"phandle", 0, &args);
unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
/* Check for incorrectly formed argument list */
+ memset(&args, 0, sizeof(args));
rc = of_parse_phandle_with_args_map(np, "phandle-list-bad-args",
"phandle", 1, &args);
unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
@@ -783,7 +793,7 @@ static void __init of_unittest_parse_interrupts(void)
for (i = 0; i < 4; i++) {
bool passed = true;
- args.args_count = 0;
+ memset(&args, 0, sizeof(args));
rc = of_irq_parse_one(np, i, &args);
passed &= !rc;
@@ -804,7 +814,7 @@ static void __init of_unittest_parse_interrupts(void)
for (i = 0; i < 4; i++) {
bool passed = true;
- args.args_count = 0;
+ memset(&args, 0, sizeof(args));
rc = of_irq_parse_one(np, i, &args);
/* Test the values from tests-phandle.dtsi */
@@ -860,6 +870,7 @@ static void __init of_unittest_parse_interrupts_extended(void)
for (i = 0; i < 7; i++) {
bool passed = true;
+ memset(&args, 0, sizeof(args));
rc = of_irq_parse_one(np, i, &args);
/* Test the values from tests-phandle.dtsi */
--
2.20.1
From: Valentin Schneider <[email protected]>
[ Upstream commit 3f130a37c442d5c4d66531b240ebe9abfef426b5 ]
When load_balance() fails to move some load because of task affinity,
we end up increasing sd->balance_interval to delay the next periodic
balance in the hopes that next time we look, that annoying pinned
task(s) will be gone.
However, idle_balance() pays no attention to sd->balance_interval, yet
it will still lead to an increase in balance_interval in case of
pinned tasks.
If we're going through several newidle balances (e.g. we have a
periodic task), this can lead to a huge increase of the
balance_interval in a very small amount of time.
To prevent that, don't increase the balance interval when going
through a newidle balance.
This is a similar approach to what is done in commit 58b26c4c0257
("sched: Increment cache_nice_tries only on periodic lb"), where we
disregard newidle balance and rely on periodic balance for more stable
results.
Signed-off-by: Valentin Schneider <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: [email protected]
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/fair.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index e5e8f67218728..f77fcd37b226f 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -8819,13 +8819,22 @@ static int load_balance(int this_cpu, struct rq *this_rq,
sd->nr_balance_failed = 0;
out_one_pinned:
+ ld_moved = 0;
+
+ /*
+ * idle_balance() disregards balance intervals, so we could repeatedly
+ * reach this code, which would lead to balance_interval skyrocketting
+ * in a short amount of time. Skip the balance_interval increase logic
+ * to avoid that.
+ */
+ if (env.idle == CPU_NEWLY_IDLE)
+ goto out;
+
/* tune up the balancing interval */
if (((env.flags & LBF_ALL_PINNED) &&
sd->balance_interval < MAX_PINNED_INTERVAL) ||
(sd->balance_interval < sd->max_interval))
sd->balance_interval *= 2;
-
- ld_moved = 0;
out:
return ld_moved;
}
--
2.20.1
From: Tycho Andersen <[email protected]>
[ Upstream commit d968b4e240cfe39d39d80483bac8bca8716fd93c ]
dlm_config_nodes() does not allocate nodes on failure, so we should not
free() nodes when it fails.
Signed-off-by: Tycho Andersen <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/dlm/member.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/fs/dlm/member.c b/fs/dlm/member.c
index 3fda3832cf6a6..cad6d85911a80 100644
--- a/fs/dlm/member.c
+++ b/fs/dlm/member.c
@@ -680,7 +680,7 @@ int dlm_ls_start(struct dlm_ls *ls)
error = dlm_config_nodes(ls->ls_name, &nodes, &count);
if (error < 0)
- goto fail;
+ goto fail_rv;
spin_lock(&ls->ls_recover_lock);
@@ -712,8 +712,9 @@ int dlm_ls_start(struct dlm_ls *ls)
return 0;
fail:
- kfree(rv);
kfree(nodes);
+ fail_rv:
+ kfree(rv);
return error;
}
--
2.20.1
From: Arnd Bergmann <[email protected]>
[ Upstream commit a277d516de5f498c91d91189717ef7e01102ad27 ]
When CONFIG_CC_OPTIMIZE_FOR_DEBUGGING is enabled, the compiler
fails to optimize out a dead code path, which leads to a link failure:
net/openvswitch/conntrack.o: In function `ovs_ct_set_labels':
conntrack.c:(.text+0x2e60): undefined reference to `nf_connlabels_replace'
In this configuration, we can take a shortcut, and completely
remove the contrack label code. This may also help the regular
optimization.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/openvswitch/conntrack.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/openvswitch/conntrack.c b/net/openvswitch/conntrack.c
index 35ae64cbef33f..46aa1aa51db41 100644
--- a/net/openvswitch/conntrack.c
+++ b/net/openvswitch/conntrack.c
@@ -1199,7 +1199,8 @@ static int ovs_ct_commit(struct net *net, struct sw_flow_key *key,
&info->labels.mask);
if (err)
return err;
- } else if (labels_nonzero(&info->labels.mask)) {
+ } else if (IS_ENABLED(CONFIG_NF_CONNTRACK_LABELS) &&
+ labels_nonzero(&info->labels.mask)) {
err = ovs_ct_set_labels(ct, key, &info->labels.value,
&info->labels.mask);
if (err)
--
2.20.1
From: Suganath Prabu <[email protected]>
[ Upstream commit 97f35194093362a63b33caba2485521ddabe2c95 ]
Currently driver is modifying both current & NVRAM/persistent data in
Manufacturing page11. Driver should change only current copy of
Manufacturing page11. It should not modify the persistent data.
So removed the section of code where driver is modifying the persistent
data of Manufacturing page11.
Signed-off-by: Suganath Prabu <[email protected]>
Reviewed-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/mpt3sas/mpt3sas_config.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c
index d29a2dcc7d0ec..9b01c5a7aebd9 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_config.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@@ -692,10 +692,6 @@ mpt3sas_config_set_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc,
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
- mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
- r = _config_request(ioc, &mpi_request, mpi_reply,
- MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
- sizeof(*config_page));
out:
return r;
}
--
2.20.1
From: Larry Chen <[email protected]>
[ Upstream commit 6194ae4242dec0c9d604bc05df83aa9260a899e4 ]
ocfs2_defrag_extent() might leak allocated clusters. When the file
system has insufficient space, the number of claimed clusters might be
less than the caller wants. If that happens, the original code might
directly commit the transaction without returning clusters.
This patch is based on code in ocfs2_add_clusters_in_btree().
[[email protected]: include localalloc.h, reduce scope of data_ac]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Larry Chen <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Changwei Ge <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ocfs2/move_extents.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/fs/ocfs2/move_extents.c b/fs/ocfs2/move_extents.c
index f55f82ca34250..1565dd8e8856e 100644
--- a/fs/ocfs2/move_extents.c
+++ b/fs/ocfs2/move_extents.c
@@ -25,6 +25,7 @@
#include "ocfs2_ioctl.h"
#include "alloc.h"
+#include "localalloc.h"
#include "aops.h"
#include "dlmglue.h"
#include "extent_map.h"
@@ -222,6 +223,7 @@ static int ocfs2_defrag_extent(struct ocfs2_move_extents_context *context,
struct ocfs2_refcount_tree *ref_tree = NULL;
u32 new_phys_cpos, new_len;
u64 phys_blkno = ocfs2_clusters_to_blocks(inode->i_sb, phys_cpos);
+ int need_free = 0;
if ((ext_flags & OCFS2_EXT_REFCOUNTED) && *len) {
BUG_ON(!ocfs2_is_refcount_inode(inode));
@@ -312,6 +314,7 @@ static int ocfs2_defrag_extent(struct ocfs2_move_extents_context *context,
if (!partial) {
context->range->me_flags &= ~OCFS2_MOVE_EXT_FL_COMPLETE;
ret = -ENOSPC;
+ need_free = 1;
goto out_commit;
}
}
@@ -336,6 +339,20 @@ static int ocfs2_defrag_extent(struct ocfs2_move_extents_context *context,
mlog_errno(ret);
out_commit:
+ if (need_free && context->data_ac) {
+ struct ocfs2_alloc_context *data_ac = context->data_ac;
+
+ if (context->data_ac->ac_which == OCFS2_AC_USE_LOCAL)
+ ocfs2_free_local_alloc_bits(osb, handle, data_ac,
+ new_phys_cpos, new_len);
+ else
+ ocfs2_free_clusters(handle,
+ data_ac->ac_inode,
+ data_ac->ac_bh,
+ ocfs2_clusters_to_blocks(osb->sb, new_phys_cpos),
+ new_len);
+ }
+
ocfs2_commit_trans(osb, handle);
out_unlock_mutex:
--
2.20.1
From: Florian Fainelli <[email protected]>
[ Upstream commit c04a17d2a9ccf1eaba1c5a56f83e997540a70556 ]
We are binding to the PHY using the SF2 slave MDIO bus that we create,
binding involves reading the PHY's MII_PHYSID1/2 which won't be possible
if the PHY is turned off. Temporarily turn it on/off for the bus probing
to succeeed. This fixes unbind/bind problems where the port connecting
to that PHY would be in error since it could not connect to it.
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/bcm_sf2.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index ca3655d28e00f..17cec68e56b4f 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -1099,12 +1099,16 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev)
return ret;
}
+ bcm_sf2_gphy_enable_set(priv->dev->ds, true);
+
ret = bcm_sf2_mdio_register(ds);
if (ret) {
pr_err("failed to register MDIO bus\n");
return ret;
}
+ bcm_sf2_gphy_enable_set(priv->dev->ds, false);
+
ret = bcm_sf2_cfp_rst(priv);
if (ret) {
pr_err("failed to reset CFP\n");
--
2.20.1
From: Len Brown <[email protected]>
[ Upstream commit 3404155190ce09a1e5d8407e968fc19aac4493e3 ]
turbostat recently gained a feature adding APIC and X2APIC columns.
While they are disabled by-default, they are enabled with --debug
or when explicitly requested, eg.
$ sudo turbostat --quiet --show Package,Node,Core,CPU,APIC,X2APIC date
But these columns erroneously showed zeros on AMD hardware.
This patch corrects the APIC and X2APIC [sic] columns on AMD.
Signed-off-by: Len Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/power/x86/turbostat/turbostat.c | 93 +++++++++++++++++----------
1 file changed, 60 insertions(+), 33 deletions(-)
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 823bbc741ad7a..02d123871ef95 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -1,6 +1,6 @@
/*
* turbostat -- show CPU frequency and C-state residency
- * on modern Intel turbo-capable processors.
+ * on modern Intel and AMD processors.
*
* Copyright (c) 2013 Intel Corporation.
* Len Brown <[email protected]>
@@ -71,6 +71,8 @@ unsigned int do_irtl_snb;
unsigned int do_irtl_hsw;
unsigned int units = 1000000; /* MHz etc */
unsigned int genuine_intel;
+unsigned int authentic_amd;
+unsigned int max_level, max_extended_level;
unsigned int has_invariant_tsc;
unsigned int do_nhm_platform_info;
unsigned int no_MSR_MISC_PWR_MGMT;
@@ -1667,30 +1669,51 @@ int get_mp(int cpu, struct msr_counter *mp, unsigned long long *counterp)
void get_apic_id(struct thread_data *t)
{
- unsigned int eax, ebx, ecx, edx, max_level;
+ unsigned int eax, ebx, ecx, edx;
- eax = ebx = ecx = edx = 0;
+ if (DO_BIC(BIC_APIC)) {
+ eax = ebx = ecx = edx = 0;
+ __cpuid(1, eax, ebx, ecx, edx);
- if (!genuine_intel)
+ t->apic_id = (ebx >> 24) & 0xff;
+ }
+
+ if (!DO_BIC(BIC_X2APIC))
return;
- __cpuid(0, max_level, ebx, ecx, edx);
+ if (authentic_amd) {
+ unsigned int topology_extensions;
- __cpuid(1, eax, ebx, ecx, edx);
- t->apic_id = (ebx >> 24) & 0xf;
+ if (max_extended_level < 0x8000001e)
+ return;
- if (max_level < 0xb)
+ eax = ebx = ecx = edx = 0;
+ __cpuid(0x80000001, eax, ebx, ecx, edx);
+ topology_extensions = ecx & (1 << 22);
+
+ if (topology_extensions == 0)
+ return;
+
+ eax = ebx = ecx = edx = 0;
+ __cpuid(0x8000001e, eax, ebx, ecx, edx);
+
+ t->x2apic_id = eax;
return;
+ }
- if (!DO_BIC(BIC_X2APIC))
+ if (!genuine_intel)
+ return;
+
+ if (max_level < 0xb)
return;
ecx = 0;
__cpuid(0xb, eax, ebx, ecx, edx);
t->x2apic_id = edx;
- if (debug && (t->apic_id != t->x2apic_id))
- fprintf(outf, "cpu%d: apic 0x%x x2apic 0x%x\n", t->cpu_id, t->apic_id, t->x2apic_id);
+ if (debug && (t->apic_id != (t->x2apic_id & 0xff)))
+ fprintf(outf, "cpu%d: BIOS BUG: apic 0x%x x2apic 0x%x\n",
+ t->cpu_id, t->apic_id, t->x2apic_id);
}
/*
@@ -4439,16 +4462,18 @@ void decode_c6_demotion_policy_msr(void)
void process_cpuid()
{
- unsigned int eax, ebx, ecx, edx, max_level, max_extended_level;
- unsigned int fms, family, model, stepping;
+ unsigned int eax, ebx, ecx, edx;
+ unsigned int fms, family, model, stepping, ecx_flags, edx_flags;
unsigned int has_turbo;
eax = ebx = ecx = edx = 0;
__cpuid(0, max_level, ebx, ecx, edx);
- if (ebx == 0x756e6547 && edx == 0x49656e69 && ecx == 0x6c65746e)
+ if (ebx == 0x756e6547 && ecx == 0x6c65746e && edx == 0x49656e69)
genuine_intel = 1;
+ else if (ebx == 0x68747541 && ecx == 0x444d4163 && edx == 0x69746e65)
+ authentic_amd = 1;
if (!quiet)
fprintf(outf, "CPUID(0): %.4s%.4s%.4s ",
@@ -4462,25 +4487,8 @@ void process_cpuid()
family += (fms >> 20) & 0xff;
if (family >= 6)
model += ((fms >> 16) & 0xf) << 4;
-
- if (!quiet) {
- fprintf(outf, "%d CPUID levels; family:model:stepping 0x%x:%x:%x (%d:%d:%d)\n",
- max_level, family, model, stepping, family, model, stepping);
- fprintf(outf, "CPUID(1): %s %s %s %s %s %s %s %s %s %s\n",
- ecx & (1 << 0) ? "SSE3" : "-",
- ecx & (1 << 3) ? "MONITOR" : "-",
- ecx & (1 << 6) ? "SMX" : "-",
- ecx & (1 << 7) ? "EIST" : "-",
- ecx & (1 << 8) ? "TM2" : "-",
- edx & (1 << 4) ? "TSC" : "-",
- edx & (1 << 5) ? "MSR" : "-",
- edx & (1 << 22) ? "ACPI-TM" : "-",
- edx & (1 << 28) ? "HT" : "-",
- edx & (1 << 29) ? "TM" : "-");
- }
-
- if (!(edx & (1 << 5)))
- errx(1, "CPUID: no MSR");
+ ecx_flags = ecx;
+ edx_flags = edx;
/*
* check max extended function levels of CPUID.
@@ -4490,6 +4498,25 @@ void process_cpuid()
ebx = ecx = edx = 0;
__cpuid(0x80000000, max_extended_level, ebx, ecx, edx);
+ if (!quiet) {
+ fprintf(outf, "0x%x CPUID levels; 0x%x xlevels; family:model:stepping 0x%x:%x:%x (%d:%d:%d)\n",
+ max_level, max_extended_level, family, model, stepping, family, model, stepping);
+ fprintf(outf, "CPUID(1): %s %s %s %s %s %s %s %s %s %s\n",
+ ecx_flags & (1 << 0) ? "SSE3" : "-",
+ ecx_flags & (1 << 3) ? "MONITOR" : "-",
+ ecx_flags & (1 << 6) ? "SMX" : "-",
+ ecx_flags & (1 << 7) ? "EIST" : "-",
+ ecx_flags & (1 << 8) ? "TM2" : "-",
+ edx_flags & (1 << 4) ? "TSC" : "-",
+ edx_flags & (1 << 5) ? "MSR" : "-",
+ edx_flags & (1 << 22) ? "ACPI-TM" : "-",
+ edx_flags & (1 << 28) ? "HT" : "-",
+ edx_flags & (1 << 29) ? "TM" : "-");
+ }
+
+ if (!(edx_flags & (1 << 5)))
+ errx(1, "CPUID: no MSR");
+
if (max_extended_level >= 0x80000007) {
/*
--
2.20.1
From: Igor Konopko <[email protected]>
[ Upstream commit 751a0cc0cd3a0d51e6aaf6fd3b8bd31f4ecfaf3e ]
When a PCIe NVMe device is not present, nvme_dev_remove_admin() calls
blk_cleanup_queue() on the admin queue, which frees the hctx for that
queue. Moments later, on the same path nvme_kill_queues() calls
blk_mq_unquiesce_queue() on admin queue and tries to access hctx of it,
which leads to following OOPS:
Oops: 0000 [#1] SMP PTI
RIP: 0010:sbitmap_any_bit_set+0xb/0x40
Call Trace:
blk_mq_run_hw_queue+0xd5/0x150
blk_mq_run_hw_queues+0x3a/0x50
nvme_kill_queues+0x26/0x50
nvme_remove_namespaces+0xb2/0xc0
nvme_remove+0x60/0x140
pci_device_remove+0x3b/0xb0
Fixes: cb4bfda62afa2 ("nvme-pci: fix hot removal during error handling")
Signed-off-by: Igor Konopko <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 5d0f99bcc987f..44da9fe5b27b8 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -3647,7 +3647,7 @@ void nvme_kill_queues(struct nvme_ctrl *ctrl)
down_read(&ctrl->namespaces_rwsem);
/* Forcibly unquiesce queues to avoid blocking dispatch */
- if (ctrl->admin_q)
+ if (ctrl->admin_q && !blk_queue_dying(ctrl->admin_q))
blk_mq_unquiesce_queue(ctrl->admin_q);
list_for_each_entry(ns, &ctrl->namespaces, list)
--
2.20.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit f24bfb39975c241374cadebbd037c17960cf1412 ]
Clang warns when one enumerated type is implicitly converted to another:
drivers/pinctrl/pinctrl-lpc18xx.c:643:29: warning: implicit conversion
from enumeration type 'enum lpc18xx_pin_config_param' to different
enumeration type 'enum pin_config_param' [-Wenum-conversion]
{"nxp,gpio-pin-interrupt", PIN_CONFIG_GPIO_PIN_INT, 0},
~ ^~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/pinctrl-lpc18xx.c:648:12: warning: implicit conversion
from enumeration type 'enum lpc18xx_pin_config_param' to different
enumeration type 'enum pin_config_param' [-Wenum-conversion]
PCONFDUMP(PIN_CONFIG_GPIO_PIN_INT, "gpio pin int", NULL, true),
~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from
macro 'PCONFDUMP'
.param = a, .display = b, .format = c, .has_arg = d \
^
2 warnings generated.
It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.
Link: https://github.com/ClangBuiltLinux/linux/issues/140
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/pinctrl-lpc18xx.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-lpc18xx.c b/drivers/pinctrl/pinctrl-lpc18xx.c
index 190f17e4bbdaf..1d3b88e6ab862 100644
--- a/drivers/pinctrl/pinctrl-lpc18xx.c
+++ b/drivers/pinctrl/pinctrl-lpc18xx.c
@@ -630,14 +630,8 @@ static const struct pinctrl_pin_desc lpc18xx_pins[] = {
LPC18XX_PIN(i2c0_sda, PIN_I2C0_SDA),
};
-/**
- * enum lpc18xx_pin_config_param - possible pin configuration parameters
- * @PIN_CONFIG_GPIO_PIN_INT: route gpio to the gpio pin interrupt
- * controller.
- */
-enum lpc18xx_pin_config_param {
- PIN_CONFIG_GPIO_PIN_INT = PIN_CONFIG_END + 1,
-};
+/* PIN_CONFIG_GPIO_PIN_INT: route gpio to the gpio pin interrupt controller */
+#define PIN_CONFIG_GPIO_PIN_INT (PIN_CONFIG_END + 1)
static const struct pinconf_generic_params lpc18xx_params[] = {
{"nxp,gpio-pin-interrupt", PIN_CONFIG_GPIO_PIN_INT, 0},
--
2.20.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit b40ac08ff886302a6aa457fd72e94a969f50e245 ]
Clang warns when one enumerated type is implicitly converted to another:
drivers/pinctrl/bcm/pinctrl-bcm2835.c:707:40: warning: implicit
conversion from enumeration type 'enum bcm2835_pinconf_param' to
different enumeration type 'enum pin_config_param' [-Wenum-conversion]
configs[0] = pinconf_to_config_packed(BCM2835_PINCONF_PARAM_PULL, pull);
~~~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.
Signed-off-by: Nathan Chancellor <[email protected]>
Acked-by: Stefan Wahren <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
index 08925d24180b0..1bd3c10ce1893 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -72,10 +72,8 @@
#define GPIO_REG_OFFSET(p) ((p) / 32)
#define GPIO_REG_SHIFT(p) ((p) % 32)
-enum bcm2835_pinconf_param {
- /* argument: bcm2835_pinconf_pull */
- BCM2835_PINCONF_PARAM_PULL = (PIN_CONFIG_END + 1),
-};
+/* argument: bcm2835_pinconf_pull */
+#define BCM2835_PINCONF_PARAM_PULL (PIN_CONFIG_END + 1)
struct bcm2835_pinctrl {
struct device *dev;
--
2.20.1
From: Maya Erez <[email protected]>
[ Upstream commit 7c69709f8ed27197b16aa1c3f9b0744402b2fa02 ]
RGF_CAF_ICR register location has changed in Talyn-MB.
Add RGF_CAF_ICR_TALYN_MB to support the new address.
Signed-off-by: Maya Erez <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wil6210/main.c | 11 +++++++++--
drivers/net/wireless/ath/wil6210/wil6210.h | 1 +
2 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index a0fe8cbad104f..aeed45f127ad6 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -1396,8 +1396,15 @@ static void wil_pre_fw_config(struct wil6210_priv *wil)
wil6210_clear_irq(wil);
/* CAF_ICR - clear and mask */
/* it is W1C, clear by writing back same value */
- wil_s(wil, RGF_CAF_ICR + offsetof(struct RGF_ICR, ICR), 0);
- wil_w(wil, RGF_CAF_ICR + offsetof(struct RGF_ICR, IMV), ~0);
+ if (wil->hw_version < HW_VER_TALYN_MB) {
+ wil_s(wil, RGF_CAF_ICR + offsetof(struct RGF_ICR, ICR), 0);
+ wil_w(wil, RGF_CAF_ICR + offsetof(struct RGF_ICR, IMV), ~0);
+ } else {
+ wil_s(wil,
+ RGF_CAF_ICR_TALYN_MB + offsetof(struct RGF_ICR, ICR), 0);
+ wil_w(wil, RGF_CAF_ICR_TALYN_MB +
+ offsetof(struct RGF_ICR, IMV), ~0);
+ }
/* clear PAL_UNIT_ICR (potential D0->D3 leftover)
* In Talyn-MB host cannot access this register due to
* access control, hence PAL_UNIT_ICR is cleared by the FW
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 17c294b1ead13..75fe1a3b70466 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -319,6 +319,7 @@ struct RGF_ICR {
/* MAC timer, usec, for packet lifetime */
#define RGF_MAC_MTRL_COUNTER_0 (0x886aa8)
+#define RGF_CAF_ICR_TALYN_MB (0x8893d4) /* struct RGF_ICR */
#define RGF_CAF_ICR (0x88946c) /* struct RGF_ICR */
#define RGF_CAF_OSC_CONTROL (0x88afa4)
#define BIT_CAF_OSC_XTAL_EN BIT(0)
--
2.20.1
From: Maya Erez <[email protected]>
[ Upstream commit 04de15010aa42a92add66b159e3ae44b4287390f ]
L2 RX status errors should not be treated as a bitmap and the actual
error values should be checked.
Print L2 errors as wil_err_ratelimited for easier debugging
when such errors occurs.
Signed-off-by: Maya Erez <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wil6210/txrx_edma.c | 23 ++++++++++----------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/txrx_edma.c b/drivers/net/wireless/ath/wil6210/txrx_edma.c
index 409a6fa8b6c8f..5fa8d6ad66482 100644
--- a/drivers/net/wireless/ath/wil6210/txrx_edma.c
+++ b/drivers/net/wireless/ath/wil6210/txrx_edma.c
@@ -808,23 +808,24 @@ static int wil_rx_error_check_edma(struct wil6210_priv *wil,
wil_dbg_txrx(wil, "L2 RX error, l2_rx_status=0x%x\n",
l2_rx_status);
/* Due to HW issue, KEY error will trigger a MIC error */
- if (l2_rx_status & WIL_RX_EDMA_ERROR_MIC) {
- wil_dbg_txrx(wil,
- "L2 MIC/KEY error, dropping packet\n");
+ if (l2_rx_status == WIL_RX_EDMA_ERROR_MIC) {
+ wil_err_ratelimited(wil,
+ "L2 MIC/KEY error, dropping packet\n");
stats->rx_mic_error++;
}
- if (l2_rx_status & WIL_RX_EDMA_ERROR_KEY) {
- wil_dbg_txrx(wil, "L2 KEY error, dropping packet\n");
+ if (l2_rx_status == WIL_RX_EDMA_ERROR_KEY) {
+ wil_err_ratelimited(wil,
+ "L2 KEY error, dropping packet\n");
stats->rx_key_error++;
}
- if (l2_rx_status & WIL_RX_EDMA_ERROR_REPLAY) {
- wil_dbg_txrx(wil,
- "L2 REPLAY error, dropping packet\n");
+ if (l2_rx_status == WIL_RX_EDMA_ERROR_REPLAY) {
+ wil_err_ratelimited(wil,
+ "L2 REPLAY error, dropping packet\n");
stats->rx_replay++;
}
- if (l2_rx_status & WIL_RX_EDMA_ERROR_AMSDU) {
- wil_dbg_txrx(wil,
- "L2 AMSDU error, dropping packet\n");
+ if (l2_rx_status == WIL_RX_EDMA_ERROR_AMSDU) {
+ wil_err_ratelimited(wil,
+ "L2 AMSDU error, dropping packet\n");
stats->rx_amsdu_error++;
}
return -EFAULT;
--
2.20.1
From: Arnd Bergmann <[email protected]>
[ Upstream commit 7e17916b35797396f681a3270245fd29c1e4c250 ]
Note: this patch fixes a problem in a feature outside of btrfs ("kernel
hacking: add a config option to disable compiler auto-inlining") and is
applied ahead of time due to cross-subsystem dependencies.
On 32-bit ARM with gcc-8, I see a link error with the addition of the
CONFIG_NO_AUTO_INLINE option:
fs/btrfs/super.o: In function `btrfs_statfs':
super.c:(.text+0x67b8): undefined reference to `__aeabi_uldivmod'
super.c:(.text+0x67fc): undefined reference to `__aeabi_uldivmod'
super.c:(.text+0x6858): undefined reference to `__aeabi_uldivmod'
super.c:(.text+0x6920): undefined reference to `__aeabi_uldivmod'
super.c:(.text+0x693c): undefined reference to `__aeabi_uldivmod'
fs/btrfs/super.o:super.c:(.text+0x6958): more undefined references to `__aeabi_uldivmod' follow
So far this is the only file that shows the behavior, so I'd propose
to just work around it by marking the functions as 'static inline'
that normally get inlined here.
The reference to __aeabi_uldivmod comes from a div_u64() which has an
optimization for a constant division that uses a straight '/' operator
when the result should be known to the compiler. My interpretation is
that as we turn off inlining, gcc still expects the result to be constant
but fails to use that constant value.
Link: https://lkml.kernel.org/r/[email protected]
Reviewed-by: Nikolay Borisov <[email protected]>
Reviewed-by: Changbin Du <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
[ add the note ]
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/super.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 8888337a95b64..ddbad8d509490 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -1919,7 +1919,7 @@ static int btrfs_remount(struct super_block *sb, int *flags, char *data)
}
/* Used to sort the devices by max_avail(descending sort) */
-static int btrfs_cmp_device_free_bytes(const void *dev_info1,
+static inline int btrfs_cmp_device_free_bytes(const void *dev_info1,
const void *dev_info2)
{
if (((struct btrfs_device_info *)dev_info1)->max_avail >
@@ -1948,8 +1948,8 @@ static inline void btrfs_descending_sort_devices(
* The helper to calc the free space on the devices that can be used to store
* file data.
*/
-static int btrfs_calc_avail_data_space(struct btrfs_fs_info *fs_info,
- u64 *free_bytes)
+static inline int btrfs_calc_avail_data_space(struct btrfs_fs_info *fs_info,
+ u64 *free_bytes)
{
struct btrfs_device_info *devices_info;
struct btrfs_fs_devices *fs_devices = fs_info->fs_devices;
--
2.20.1
From: Frank Rowand <[email protected]>
[ Upstream commit 5babefb7f7ab1f23861336d511cc666fa45ede82 ]
The overlay metadata nodes in the FDT created from testcases.dts
are not handled properly.
The __fixups__ and __local_fixups__ node were added to the live
devicetree, but should not be.
Only the first property in the /__symbols__ node was added to the
live devicetree if the live devicetree already contained a
/__symbols node. All of the node's properties must be added.
Tested-by: Alan Tull <[email protected]>
Signed-off-by: Frank Rowand <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/of/unittest.c | 43 +++++++++++++++++++++++++++++++++++--------
1 file changed, 35 insertions(+), 8 deletions(-)
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index bac4b4bbc33de..e8997cdb228cb 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -1067,20 +1067,44 @@ static void __init of_unittest_platform_populate(void)
* of np into dup node (present in live tree) and
* updates parent of children of np to dup.
*
- * @np: node already present in live tree
+ * @np: node whose properties are being added to the live tree
* @dup: node present in live tree to be updated
*/
static void update_node_properties(struct device_node *np,
struct device_node *dup)
{
struct property *prop;
+ struct property *save_next;
struct device_node *child;
-
- for_each_property_of_node(np, prop)
- of_add_property(dup, prop);
+ int ret;
for_each_child_of_node(np, child)
child->parent = dup;
+
+ /*
+ * "unittest internal error: unable to add testdata property"
+ *
+ * If this message reports a property in node '/__symbols__' then
+ * the respective unittest overlay contains a label that has the
+ * same name as a label in the live devicetree. The label will
+ * be in the live devicetree only if the devicetree source was
+ * compiled with the '-@' option. If you encounter this error,
+ * please consider renaming __all__ of the labels in the unittest
+ * overlay dts files with an odd prefix that is unlikely to be
+ * used in a real devicetree.
+ */
+
+ /*
+ * open code for_each_property_of_node() because of_add_property()
+ * sets prop->next to NULL
+ */
+ for (prop = np->properties; prop != NULL; prop = save_next) {
+ save_next = prop->next;
+ ret = of_add_property(dup, prop);
+ if (ret)
+ pr_err("unittest internal error: unable to add testdata property %pOF/%s",
+ np, prop->name);
+ }
}
/**
@@ -1089,18 +1113,23 @@ static void update_node_properties(struct device_node *np,
*
* @np: Node to attach to live tree
*/
-static int attach_node_and_children(struct device_node *np)
+static void attach_node_and_children(struct device_node *np)
{
struct device_node *next, *dup, *child;
unsigned long flags;
const char *full_name;
full_name = kasprintf(GFP_KERNEL, "%pOF", np);
+
+ if (!strcmp(full_name, "/__local_fixups__") ||
+ !strcmp(full_name, "/__fixups__"))
+ return;
+
dup = of_find_node_by_path(full_name);
kfree(full_name);
if (dup) {
update_node_properties(np, dup);
- return 0;
+ return;
}
child = np->child;
@@ -1121,8 +1150,6 @@ static int attach_node_and_children(struct device_node *np)
attach_node_and_children(child);
child = next;
}
-
- return 0;
}
/**
--
2.20.1
From: Richard Guy Briggs <[email protected]>
[ Upstream commit ea956d8be91edc702a98b7fe1f9463e7ca8c42ab ]
Empty executable arguments were being skipped when printing out the list
of arguments in an EXECVE record, making it appear they were somehow
lost. Include empty arguments as an itemized empty string.
Reproducer:
autrace /bin/ls "" "/etc"
ausearch --start recent -m execve -i | grep EXECVE
type=EXECVE msg=audit(10/03/2018 13:04:03.208:1391) : argc=3 a0=/bin/ls a2=/etc
With fix:
type=EXECVE msg=audit(10/03/2018 21:51:38.290:194) : argc=3 a0=/bin/ls a1= a2=/etc
type=EXECVE msg=audit(1538617898.290:194): argc=3 a0="/bin/ls" a1="" a2="/etc"
Passes audit-testsuite. GH issue tracker at
https://github.com/linux-audit/audit-kernel/issues/99
Signed-off-by: Richard Guy Briggs <[email protected]>
[PM: cleaned up the commit metadata]
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/auditsc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index b2d1f043f17fb..1513873e23bd1 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -1107,7 +1107,7 @@ static void audit_log_execve_info(struct audit_context *context,
}
/* write as much as we can to the audit log */
- if (len_buf > 0) {
+ if (len_buf >= 0) {
/* NOTE: some magic numbers here - basically if we
* can't fit a reasonable amount of data into the
* existing audit buffer, flush it and start with
--
2.20.1
From: Jon Mason <[email protected]>
[ Upstream commit a861594b1b7ffd630f335b351c4e9f938feadb8e ]
The tx_time should be in usecs (according to the comment above the
variable), but the setting of the timer during the rearming is done in
msecs. Change it to match the expected units.
Fixes: e74bfeedad08 ("NTB: Add flow control to the ntb_netdev")
Suggested-by: Gerd W. Haeussler <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
Acked-by: Dave Jiang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ntb_netdev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ntb_netdev.c b/drivers/net/ntb_netdev.c
index b12023bc2cab5..df8d49ad48c38 100644
--- a/drivers/net/ntb_netdev.c
+++ b/drivers/net/ntb_netdev.c
@@ -236,7 +236,7 @@ static void ntb_netdev_tx_timer(struct timer_list *t)
struct net_device *ndev = dev->ndev;
if (ntb_transport_tx_free_entry(dev->qp) < tx_stop) {
- mod_timer(&dev->tx_timer, jiffies + msecs_to_jiffies(tx_time));
+ mod_timer(&dev->tx_timer, jiffies + usecs_to_jiffies(tx_time));
} else {
/* Make sure anybody stopping the queue after this sees the new
* value of ntb_transport_tx_free_entry()
--
2.20.1
From: Changwei Ge <[email protected]>
[ Upstream commit 9e985787750db8aae87f02b67e908f28ac4d6b83 ]
When -EIOCBQUEUED returns, it means that aio_complete() will be called
from dio_complete(), which is an asynchronous progress against
write_iter. Generally, IO is a very slow progress than executing
instruction, but we still can't take the risk to access a freed iocb.
And we do face a BUG crash issue. Using the crash tool, iocb is
obviously freed already.
crash> struct -x kiocb ffff881a350f5900
struct kiocb {
ki_filp = 0xffff881a350f5a80,
ki_pos = 0x0,
ki_complete = 0x0,
private = 0x0,
ki_flags = 0x0
}
And the backtrace shows:
ocfs2_file_write_iter+0xcaa/0xd00 [ocfs2]
aio_run_iocb+0x229/0x2f0
do_io_submit+0x291/0x540
SyS_io_submit+0x10/0x20
system_call_fastpath+0x16/0x75
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Changwei Ge <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Joseph Qi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ocfs2/file.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index a847fe52c56ee..a3e077fcfeb9b 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -2389,7 +2389,7 @@ static ssize_t ocfs2_file_write_iter(struct kiocb *iocb,
written = __generic_file_write_iter(iocb, from);
/* buffered aio wouldn't have proper lock coverage today */
- BUG_ON(written == -EIOCBQUEUED && !(iocb->ki_flags & IOCB_DIRECT));
+ BUG_ON(written == -EIOCBQUEUED && !direct_io);
/*
* deep in g_f_a_w_n()->ocfs2_direct_IO we pass in a ocfs2_dio_end_io
@@ -2509,7 +2509,7 @@ static ssize_t ocfs2_file_read_iter(struct kiocb *iocb,
trace_generic_file_read_iter_ret(ret);
/* buffered aio wouldn't have proper lock coverage today */
- BUG_ON(ret == -EIOCBQUEUED && !(iocb->ki_flags & IOCB_DIRECT));
+ BUG_ON(ret == -EIOCBQUEUED && !direct_io);
/* see ocfs2_file_write_iter */
if (ret == -EIOCBQUEUED || !ocfs2_iocb_is_rw_locked(iocb)) {
--
2.20.1
From: Dmitry Osipenko <[email protected]>
[ Upstream commit 514fddba845ed3a1b17e01e99cb3a2a52256a88a ]
Kernel should never gate the EMC clock as it causes immediate lockup, so
removing clk-gate functionality doesn't affect anything. Turning EMC clk
gate into divider allows to implement glitch-less EMC scaling, avoiding
reparenting to a backup clock.
Signed-off-by: Dmitry Osipenko <[email protected]>
Acked-by: Peter De Schrijver <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/tegra/clk-tegra20.c | 36 ++++++++++++++++++++++++---------
1 file changed, 26 insertions(+), 10 deletions(-)
diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index cc857d4d4a86e..68551effb5ca2 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -578,7 +578,6 @@ static struct tegra_clk tegra20_clks[tegra_clk_max] __initdata = {
[tegra_clk_afi] = { .dt_id = TEGRA20_CLK_AFI, .present = true },
[tegra_clk_fuse] = { .dt_id = TEGRA20_CLK_FUSE, .present = true },
[tegra_clk_kfuse] = { .dt_id = TEGRA20_CLK_KFUSE, .present = true },
- [tegra_clk_emc] = { .dt_id = TEGRA20_CLK_EMC, .present = true },
};
static unsigned long tegra20_clk_measure_input_freq(void)
@@ -799,6 +798,31 @@ static struct tegra_periph_init_data tegra_periph_nodiv_clk_list[] = {
TEGRA_INIT_DATA_NODIV("disp2", mux_pllpdc_clkm, CLK_SOURCE_DISP2, 30, 2, 26, 0, TEGRA20_CLK_DISP2),
};
+static void __init tegra20_emc_clk_init(void)
+{
+ struct clk *clk;
+
+ clk = clk_register_mux(NULL, "emc_mux", mux_pllmcp_clkm,
+ ARRAY_SIZE(mux_pllmcp_clkm),
+ CLK_SET_RATE_NO_REPARENT,
+ clk_base + CLK_SOURCE_EMC,
+ 30, 2, 0, &emc_lock);
+
+ clk = tegra_clk_register_mc("mc", "emc_mux", clk_base + CLK_SOURCE_EMC,
+ &emc_lock);
+ clks[TEGRA20_CLK_MC] = clk;
+
+ /*
+ * Note that 'emc_mux' source and 'emc' rate shouldn't be changed at
+ * the same time due to a HW bug, this won't happen because we're
+ * defining 'emc_mux' and 'emc' as distinct clocks.
+ */
+ clk = tegra_clk_register_divider("emc", "emc_mux",
+ clk_base + CLK_SOURCE_EMC, CLK_IS_CRITICAL,
+ TEGRA_DIVIDER_INT, 0, 8, 1, &emc_lock);
+ clks[TEGRA20_CLK_EMC] = clk;
+}
+
static void __init tegra20_periph_clk_init(void)
{
struct tegra_periph_init_data *data;
@@ -812,15 +836,7 @@ static void __init tegra20_periph_clk_init(void)
clks[TEGRA20_CLK_AC97] = clk;
/* emc */
- clk = clk_register_mux(NULL, "emc_mux", mux_pllmcp_clkm,
- ARRAY_SIZE(mux_pllmcp_clkm),
- CLK_SET_RATE_NO_REPARENT,
- clk_base + CLK_SOURCE_EMC,
- 30, 2, 0, &emc_lock);
-
- clk = tegra_clk_register_mc("mc", "emc_mux", clk_base + CLK_SOURCE_EMC,
- &emc_lock);
- clks[TEGRA20_CLK_MC] = clk;
+ tegra20_emc_clk_init();
/* dsi */
clk = tegra_clk_register_periph_gate("dsi", "pll_d", 0, clk_base, 0,
--
2.20.1
From: Keith Busch <[email protected]>
[ Upstream commit 9fe5c59ff6a1e5e26a39b75489a1420e7eaaf0b1 ]
The nvme pci driver had been adding its CMB resource to the P2P DMA
subsystem everytime on on a controller reset. This results in the
following warning:
------------[ cut here ]------------
nvme 0000:00:03.0: Conflicting mapping in same section
WARNING: CPU: 7 PID: 81 at kernel/memremap.c:155 devm_memremap_pages+0xa6/0x380
...
Call Trace:
pci_p2pdma_add_resource+0x153/0x370
nvme_reset_work+0x28c/0x17b1 [nvme]
? add_timer+0x107/0x1e0
? dequeue_entity+0x81/0x660
? dequeue_entity+0x3b0/0x660
? pick_next_task_fair+0xaf/0x610
? __switch_to+0xbc/0x410
process_one_work+0x1cf/0x350
worker_thread+0x215/0x3d0
? process_one_work+0x350/0x350
kthread+0x107/0x120
? kthread_park+0x80/0x80
ret_from_fork+0x1f/0x30
---[ end trace f7ea76ac6ee72727 ]---
nvme nvme0: failed to register the CMB
This patch fixes this by registering the CMB with P2P only once.
Signed-off-by: Keith Busch <[email protected]>
Reviewed-by: Logan Gunthorpe <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/pci.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 9479c0db08f62..124f41157173e 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -1652,6 +1652,9 @@ static void nvme_map_cmb(struct nvme_dev *dev)
struct pci_dev *pdev = to_pci_dev(dev->dev);
int bar;
+ if (dev->cmb_size)
+ return;
+
dev->cmbsz = readl(dev->bar + NVME_REG_CMBSZ);
if (!dev->cmbsz)
return;
@@ -2136,7 +2139,6 @@ static void nvme_pci_disable(struct nvme_dev *dev)
{
struct pci_dev *pdev = to_pci_dev(dev->dev);
- nvme_release_cmb(dev);
pci_free_irq_vectors(pdev);
if (pci_is_enabled(pdev)) {
@@ -2595,6 +2597,7 @@ static void nvme_remove(struct pci_dev *pdev)
nvme_stop_ctrl(&dev->ctrl);
nvme_remove_namespaces(&dev->ctrl);
nvme_dev_disable(dev, true);
+ nvme_release_cmb(dev);
nvme_free_host_mem(dev);
nvme_dev_remove_admin(dev);
nvme_free_queues(dev, 0);
--
2.20.1
From: Peter Zijlstra <[email protected]>
[ Upstream commit 993f0b0510dad98b4e6e39506834dab0d13fd539 ]
With the addition of the NUMA identity level, we increased @level by
one and will run off the end of the array in the distance sort loop.
Fixed: 051f3ca02e46 ("sched/topology: Introduce NUMA identity node sched domain")
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/topology.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c
index c0a7514649715..74b694392f2fd 100644
--- a/kernel/sched/topology.c
+++ b/kernel/sched/topology.c
@@ -1329,7 +1329,7 @@ void sched_init_numa(void)
int level = 0;
int i, j, k;
- sched_domains_numa_distance = kzalloc(sizeof(int) * nr_node_ids, GFP_KERNEL);
+ sched_domains_numa_distance = kzalloc(sizeof(int) * (nr_node_ids + 1), GFP_KERNEL);
if (!sched_domains_numa_distance)
return;
--
2.20.1
From: Tycho Andersen <[email protected]>
[ Upstream commit 9de30f3f7f4d31037cfbb7c787e1089c1944b3a7 ]
In copy_result_to_user(), we first create a struct dlm_lock_result, which
contains a struct dlm_lksb, the last member of which is a pointer to the
lvb. Unfortunately, we copy the entire struct dlm_lksb to the result
struct, which is then copied to userspace at the end of the function,
leaking the contents of sb_lvbptr, which is a valid kernel pointer in some
cases (indeed, later in the same function the data it points to is copied
to userspace).
It is an error to leak kernel pointers to userspace, as it undermines KASLR
protections (see e.g. 65eea8edc31 ("floppy: Do not copy a kernel pointer to
user memory in FDGETPRM ioctl") for another example of this).
Signed-off-by: Tycho Andersen <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/dlm/user.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/dlm/user.c b/fs/dlm/user.c
index 2a669390cd7f6..13f29409600bb 100644
--- a/fs/dlm/user.c
+++ b/fs/dlm/user.c
@@ -702,7 +702,7 @@ static int copy_result_to_user(struct dlm_user_args *ua, int compat,
result.version[0] = DLM_DEVICE_VERSION_MAJOR;
result.version[1] = DLM_DEVICE_VERSION_MINOR;
result.version[2] = DLM_DEVICE_VERSION_PATCH;
- memcpy(&result.lksb, &ua->lksb, sizeof(struct dlm_lksb));
+ memcpy(&result.lksb, &ua->lksb, offsetof(struct dlm_lksb, sb_lvbptr));
result.user_lksb = ua->user_lksb;
/* FIXME: dlm1 provides for the user's bastparam/addr to not be updated
--
2.20.1
From: Changwei Ge <[email protected]>
[ Upstream commit cf76c78595ca87548ca5e45c862ac9e0949c4687 ]
ocfs2_read_blocks() and ocfs2_read_blocks_sync() are both used to read
several blocks from disk. Currently, the input argument *bhs* can be
NULL or NOT. It depends on the caller's behavior. If the function
fails in reading blocks from disk, the corresponding bh will be assigned
to NULL and put.
Obviously, above process for non-NULL input bh is not appropriate.
Because the caller doesn't even know its bhs are put and re-assigned.
If buffer head is managed by caller, ocfs2_read_blocks and
ocfs2_read_blocks_sync() should not evaluate it to NULL. It will cause
caller accessing illegal memory, thus crash.
Link: http://lkml.kernel.org/r/HK2PR06MB045285E0F4FBB561F9F2F9B3D5680@HK2PR06MB0452.apcprd06.prod.outlook.com
Signed-off-by: Changwei Ge <[email protected]>
Reviewed-by: Guozhonghua <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Changwei Ge <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ocfs2/buffer_head_io.c | 77 ++++++++++++++++++++++++++++++---------
1 file changed, 59 insertions(+), 18 deletions(-)
diff --git a/fs/ocfs2/buffer_head_io.c b/fs/ocfs2/buffer_head_io.c
index 9f8250df99f1f..f9b84f7a3e4bb 100644
--- a/fs/ocfs2/buffer_head_io.c
+++ b/fs/ocfs2/buffer_head_io.c
@@ -99,25 +99,34 @@ int ocfs2_write_block(struct ocfs2_super *osb, struct buffer_head *bh,
return ret;
}
+/* Caller must provide a bhs[] with all NULL or non-NULL entries, so it
+ * will be easier to handle read failure.
+ */
int ocfs2_read_blocks_sync(struct ocfs2_super *osb, u64 block,
unsigned int nr, struct buffer_head *bhs[])
{
int status = 0;
unsigned int i;
struct buffer_head *bh;
+ int new_bh = 0;
trace_ocfs2_read_blocks_sync((unsigned long long)block, nr);
if (!nr)
goto bail;
+ /* Don't put buffer head and re-assign it to NULL if it is allocated
+ * outside since the caller can't be aware of this alternation!
+ */
+ new_bh = (bhs[0] == NULL);
+
for (i = 0 ; i < nr ; i++) {
if (bhs[i] == NULL) {
bhs[i] = sb_getblk(osb->sb, block++);
if (bhs[i] == NULL) {
status = -ENOMEM;
mlog_errno(status);
- goto bail;
+ break;
}
}
bh = bhs[i];
@@ -157,9 +166,26 @@ int ocfs2_read_blocks_sync(struct ocfs2_super *osb, u64 block,
submit_bh(REQ_OP_READ, 0, bh);
}
+read_failure:
for (i = nr; i > 0; i--) {
bh = bhs[i - 1];
+ if (unlikely(status)) {
+ if (new_bh && bh) {
+ /* If middle bh fails, let previous bh
+ * finish its read and then put it to
+ * aovoid bh leak
+ */
+ if (!buffer_jbd(bh))
+ wait_on_buffer(bh);
+ put_bh(bh);
+ bhs[i - 1] = NULL;
+ } else if (bh && buffer_uptodate(bh)) {
+ clear_buffer_uptodate(bh);
+ }
+ continue;
+ }
+
/* No need to wait on the buffer if it's managed by JBD. */
if (!buffer_jbd(bh))
wait_on_buffer(bh);
@@ -169,8 +195,7 @@ int ocfs2_read_blocks_sync(struct ocfs2_super *osb, u64 block,
* so we can safely record this and loop back
* to cleanup the other buffers. */
status = -EIO;
- put_bh(bh);
- bhs[i - 1] = NULL;
+ goto read_failure;
}
}
@@ -178,6 +203,9 @@ int ocfs2_read_blocks_sync(struct ocfs2_super *osb, u64 block,
return status;
}
+/* Caller must provide a bhs[] with all NULL or non-NULL entries, so it
+ * will be easier to handle read failure.
+ */
int ocfs2_read_blocks(struct ocfs2_caching_info *ci, u64 block, int nr,
struct buffer_head *bhs[], int flags,
int (*validate)(struct super_block *sb,
@@ -187,6 +215,7 @@ int ocfs2_read_blocks(struct ocfs2_caching_info *ci, u64 block, int nr,
int i, ignore_cache = 0;
struct buffer_head *bh;
struct super_block *sb = ocfs2_metadata_cache_get_super(ci);
+ int new_bh = 0;
trace_ocfs2_read_blocks_begin(ci, (unsigned long long)block, nr, flags);
@@ -212,6 +241,11 @@ int ocfs2_read_blocks(struct ocfs2_caching_info *ci, u64 block, int nr,
goto bail;
}
+ /* Don't put buffer head and re-assign it to NULL if it is allocated
+ * outside since the caller can't be aware of this alternation!
+ */
+ new_bh = (bhs[0] == NULL);
+
ocfs2_metadata_cache_io_lock(ci);
for (i = 0 ; i < nr ; i++) {
if (bhs[i] == NULL) {
@@ -220,7 +254,8 @@ int ocfs2_read_blocks(struct ocfs2_caching_info *ci, u64 block, int nr,
ocfs2_metadata_cache_io_unlock(ci);
status = -ENOMEM;
mlog_errno(status);
- goto bail;
+ /* Don't forget to put previous bh! */
+ break;
}
}
bh = bhs[i];
@@ -314,16 +349,27 @@ int ocfs2_read_blocks(struct ocfs2_caching_info *ci, u64 block, int nr,
}
}
- status = 0;
-
+read_failure:
for (i = (nr - 1); i >= 0; i--) {
bh = bhs[i];
if (!(flags & OCFS2_BH_READAHEAD)) {
- if (status) {
- /* Clear the rest of the buffers on error */
- put_bh(bh);
- bhs[i] = NULL;
+ if (unlikely(status)) {
+ /* Clear the buffers on error including those
+ * ever succeeded in reading
+ */
+ if (new_bh && bh) {
+ /* If middle bh fails, let previous bh
+ * finish its read and then put it to
+ * aovoid bh leak
+ */
+ if (!buffer_jbd(bh))
+ wait_on_buffer(bh);
+ put_bh(bh);
+ bhs[i] = NULL;
+ } else if (bh && buffer_uptodate(bh)) {
+ clear_buffer_uptodate(bh);
+ }
continue;
}
/* We know this can't have changed as we hold the
@@ -341,9 +387,7 @@ int ocfs2_read_blocks(struct ocfs2_caching_info *ci, u64 block, int nr,
* uptodate. */
status = -EIO;
clear_buffer_needs_validate(bh);
- put_bh(bh);
- bhs[i] = NULL;
- continue;
+ goto read_failure;
}
if (buffer_needs_validate(bh)) {
@@ -353,11 +397,8 @@ int ocfs2_read_blocks(struct ocfs2_caching_info *ci, u64 block, int nr,
BUG_ON(buffer_jbd(bh));
clear_buffer_needs_validate(bh);
status = validate(sb, bh);
- if (status) {
- put_bh(bh);
- bhs[i] = NULL;
- continue;
- }
+ if (status)
+ goto read_failure;
}
}
--
2.20.1
From: Badhri Jagan Sridharan <[email protected]>
[ Upstream commit 157c0f2f641a9938382b092c64548ebdabfe25e0 ]
During the initial connect to a non-pd port, sink would hard reset
twice before deeming that the port partner is non-pd. TCPM sets the
the charge path to false during the hard reset. This causes unnecessary
connects/disconnects of charge path and makes port take longer to
charge from the non-pd ports. Avoid this by not setting the charge path
to false unless the partner has already identified to be pd capable.
When partner is a pd port, set the charge path to false in
SNK_HARD_RESET_SINK_OFF. Set the current limits to default value based
of CC pull up and resume the charge path when port enters
SNK_HARD_RESET_SINK_ON.
Signed-off-by: Badhri Jagan Sridharan <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
--------
Changes in V3:
Rebase on top of usb-next
Changes in V2:
Based on feedback of [email protected]
- vsafe_5v_hard_reset flag from tcpc_config is removed
- Patch only differentiates between pd port partner and non-pd port
partner
V1 version of the patch is here:
https://lkml.org/lkml/2018/9/14/11
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/typec/tcpm.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c
index 819ae3b2bd7e8..39cf190012393 100644
--- a/drivers/usb/typec/tcpm.c
+++ b/drivers/usb/typec/tcpm.c
@@ -3322,7 +3322,8 @@ static void run_state_machine(struct tcpm_port *port)
case SNK_HARD_RESET_SINK_OFF:
memset(&port->pps_data, 0, sizeof(port->pps_data));
tcpm_set_vconn(port, false);
- tcpm_set_charge(port, false);
+ if (port->pd_capable)
+ tcpm_set_charge(port, false);
tcpm_set_roles(port, port->self_powered, TYPEC_SINK,
TYPEC_DEVICE);
/*
@@ -3354,6 +3355,12 @@ static void run_state_machine(struct tcpm_port *port)
* Similar, dual-mode ports in source mode should transition
* to PE_SNK_Transition_to_default.
*/
+ if (port->pd_capable) {
+ tcpm_set_current_limit(port,
+ tcpm_get_current_limit(port),
+ 5000);
+ tcpm_set_charge(port, true);
+ }
tcpm_set_attached_state(port, true);
tcpm_set_state(port, SNK_STARTUP, 0);
break;
--
2.20.1
From: Roman Gushchin <[email protected]>
[ Upstream commit e68599a3c3ad0f3171a7cb4e48aa6f9a69381902 ]
Mike Galbraith reported a regression caused by the commit 9b6f7e163cd0
("mm: rework memcg kernel stack accounting") on a system with
"cgroup_disable=memory" boot option: the system panics with the following
stack trace:
BUG: unable to handle kernel NULL pointer dereference at 00000000000000f8
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 0 PID: 1 Comm: systemd Not tainted 4.19.0-preempt+ #410
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180531_142017-buildhw-08.phx2.fed4
RIP: 0010:page_counter_try_charge+0x22/0xc0
Code: 41 5d c3 c3 0f 1f 40 00 0f 1f 44 00 00 48 85 ff 0f 84 a7 00 00 00 41 56 48 89 f8 49 89 fe 49
Call Trace:
try_charge+0xcb/0x780
memcg_kmem_charge_memcg+0x28/0x80
memcg_kmem_charge+0x8b/0x1d0
copy_process.part.41+0x1ca/0x2070
_do_fork+0xd7/0x3d0
do_syscall_64+0x5a/0x180
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The problem occurs because get_mem_cgroup_from_current() returns the NULL
pointer if memory controller is disabled. Let's check if this is a case
at the beginning of memcg_kmem_charge() and just return 0 if
mem_cgroup_disabled() returns true. This is how we handle this case in
many other places in the memory controller code.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 9b6f7e163cd0 ("mm: rework memcg kernel stack accounting")
Signed-off-by: Roman Gushchin <[email protected]>
Reported-by: Mike Galbraith <[email protected]>
Acked-by: Rik van Riel <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Vladimir Davydov <[email protected]>
Cc: Shakeel Butt <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/memcontrol.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index e0f7b94a4e9bc..b3220d2102461 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -2678,7 +2678,7 @@ int memcg_kmem_charge(struct page *page, gfp_t gfp, int order)
struct mem_cgroup *memcg;
int ret = 0;
- if (memcg_kmem_bypass())
+ if (mem_cgroup_disabled() || memcg_kmem_bypass())
return 0;
memcg = get_mem_cgroup_from_current();
--
2.20.1
From: James Smart <[email protected]>
[ Upstream commit d83ca3ea833d7a66d49225e4191c4e37cab8f079 ]
An address change for a remote port cause PRLI for the wrong protocol
to be sent. The node copy done in the discovery code skipped copying
the fc4 protocols supported as well.
Fix the copy logic for the address change. Beefed up log messages in
this area as well.
Signed-off-by: Dick Kennedy <[email protected]>
Signed-off-by: James Smart <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_els.c | 27 +++++++++++++++++++++++----
drivers/scsi/lpfc/lpfc_nportdisc.c | 5 +++--
2 files changed, 26 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index e263a486b1c6c..222fa9b7f4788 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1556,8 +1556,10 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
*/
new_ndlp = lpfc_findnode_wwpn(vport, &sp->portName);
+ /* return immediately if the WWPN matches ndlp */
if (new_ndlp == ndlp && NLP_CHK_NODE_ACT(new_ndlp))
return ndlp;
+
if (phba->sli_rev == LPFC_SLI_REV4) {
active_rrqs_xri_bitmap = mempool_alloc(phba->active_rrq_pool,
GFP_KERNEL);
@@ -1566,9 +1568,13 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
phba->cfg_rrq_xri_bitmap_sz);
}
- lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
- "3178 PLOGI confirm: ndlp %p x%x: new_ndlp %p\n",
- ndlp, ndlp->nlp_DID, new_ndlp);
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS | LOG_NODE,
+ "3178 PLOGI confirm: ndlp x%x x%x x%x: "
+ "new_ndlp x%x x%x x%x\n",
+ ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_fc4_type,
+ (new_ndlp ? new_ndlp->nlp_DID : 0),
+ (new_ndlp ? new_ndlp->nlp_flag : 0),
+ (new_ndlp ? new_ndlp->nlp_fc4_type : 0));
if (!new_ndlp) {
rc = memcmp(&ndlp->nlp_portname, name,
@@ -1617,6 +1623,14 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
phba->cfg_rrq_xri_bitmap_sz);
}
+ /* At this point in this routine, we know new_ndlp will be
+ * returned. however, any previous GID_FTs that were done
+ * would have updated nlp_fc4_type in ndlp, so we must ensure
+ * new_ndlp has the right value.
+ */
+ if (vport->fc_flag & FC_FABRIC)
+ new_ndlp->nlp_fc4_type = ndlp->nlp_fc4_type;
+
lpfc_unreg_rpi(vport, new_ndlp);
new_ndlp->nlp_DID = ndlp->nlp_DID;
new_ndlp->nlp_prev_state = ndlp->nlp_prev_state;
@@ -1666,7 +1680,6 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
if (ndlp->nrport) {
ndlp->nrport = NULL;
lpfc_nlp_put(ndlp);
- new_ndlp->nlp_fc4_type = ndlp->nlp_fc4_type;
}
/* We shall actually free the ndlp with both nlp_DID and
@@ -1740,6 +1753,12 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
active_rrqs_xri_bitmap)
mempool_free(active_rrqs_xri_bitmap,
phba->active_rrq_pool);
+
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS | LOG_NODE,
+ "3173 PLOGI confirm exit: new_ndlp x%x x%x x%x\n",
+ new_ndlp->nlp_DID, new_ndlp->nlp_flag,
+ new_ndlp->nlp_fc4_type);
+
return new_ndlp;
}
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index ae6301c796785..f72a0d628bd3d 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -2865,8 +2865,9 @@ lpfc_disc_state_machine(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
/* DSM in event <evt> on NPort <nlp_DID> in state <cur_state> */
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0211 DSM in event x%x on NPort x%x in "
- "state %d Data: x%x\n",
- evt, ndlp->nlp_DID, cur_state, ndlp->nlp_flag);
+ "state %d Data: x%x x%x\n",
+ evt, ndlp->nlp_DID, cur_state,
+ ndlp->nlp_flag, ndlp->nlp_fc4_type);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_DSM,
"DSM in: evt:%d ste:%d did:x%x",
--
2.20.1
From: James Smart <[email protected]>
[ Upstream commit d496b9a7246cb9813da1fe49e14edbbbf8e232d5 ]
Testing a point-to-point topology and a case of re-FLOGI without
intervening link bouncing, showed an odd interaction with firmware and
a resulting scenario where the driver no longer probed after accepting
the new FLOGI.
Work around the firmware issue by issuing a link bounce if a FLOGI is
received after the link is already up and FLOGI's accepted.
While debugging the issue, realized that some debug traces should be
clarified to help in the future.
Signed-off-by: Dick Kennedy <[email protected]>
Signed-off-by: James Smart <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc.h | 1 +
drivers/scsi/lpfc/lpfc_els.c | 66 ++++++++++++++++++++++++++------
drivers/scsi/lpfc/lpfc_hbadisc.c | 9 +++++
3 files changed, 64 insertions(+), 12 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 43732e8d13473..ebcfcbb8b4ccc 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -490,6 +490,7 @@ struct lpfc_vport {
struct nvme_fc_local_port *localport;
uint8_t nvmei_support; /* driver supports NVME Initiator */
uint32_t last_fcp_wqidx;
+ uint32_t rcv_flogi_cnt; /* How many unsol FLOGIs ACK'd. */
};
struct hbq_s {
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 8bf916b9a987d..e263a486b1c6c 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1057,9 +1057,9 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
goto flogifail;
lpfc_printf_vlog(vport, KERN_WARNING, LOG_ELS,
- "0150 FLOGI failure Status:x%x/x%x TMO:x%x\n",
+ "0150 FLOGI failure Status:x%x/x%x xri x%x TMO:x%x\n",
irsp->ulpStatus, irsp->un.ulpWord[4],
- irsp->ulpTimeout);
+ cmdiocb->sli4_xritag, irsp->ulpTimeout);
/* FLOGI failed, so there is no fabric */
spin_lock_irq(shost->host_lock);
@@ -1113,7 +1113,8 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
/* FLOGI completes successfully */
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"0101 FLOGI completes successfully, I/O tag:x%x, "
- "Data: x%x x%x x%x x%x x%x x%x\n", cmdiocb->iotag,
+ "xri x%x Data: x%x x%x x%x x%x x%x %x\n",
+ cmdiocb->iotag, cmdiocb->sli4_xritag,
irsp->un.ulpWord[4], sp->cmn.e_d_tov,
sp->cmn.w2.r_a_tov, sp->cmn.edtovResolution,
vport->port_state, vport->fc_flag);
@@ -4266,14 +4267,6 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag,
default:
return 1;
}
- /* Xmit ELS ACC response tag <ulpIoTag> */
- lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
- "0128 Xmit ELS ACC response tag x%x, XRI: x%x, "
- "DID: x%x, nlp_flag: x%x nlp_state: x%x RPI: x%x "
- "fc_flag x%x\n",
- elsiocb->iotag, elsiocb->iocb.ulpContext,
- ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_state,
- ndlp->nlp_rpi, vport->fc_flag);
if (ndlp->nlp_flag & NLP_LOGO_ACC) {
spin_lock_irq(shost->host_lock);
if (!(ndlp->nlp_flag & NLP_RPI_REGISTERED ||
@@ -4442,6 +4435,15 @@ lpfc_els_rsp_adisc_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
lpfc_els_free_iocb(phba, elsiocb);
return 1;
}
+
+ /* Xmit ELS ACC response tag <ulpIoTag> */
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
+ "0128 Xmit ELS ACC response Status: x%x, IoTag: x%x, "
+ "XRI: x%x, DID: x%x, nlp_flag: x%x nlp_state: x%x "
+ "RPI: x%x, fc_flag x%x\n",
+ rc, elsiocb->iotag, elsiocb->sli4_xritag,
+ ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_state,
+ ndlp->nlp_rpi, vport->fc_flag);
return 0;
}
@@ -6452,6 +6454,11 @@ lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
port_state = vport->port_state;
vport->fc_flag |= FC_PT2PT;
vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP);
+
+ /* Acking an unsol FLOGI. Count 1 for link bounce
+ * work-around.
+ */
+ vport->rcv_flogi_cnt++;
spin_unlock_irq(shost->host_lock);
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"3311 Rcv Flogi PS x%x new PS x%x "
@@ -7849,8 +7856,9 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
struct ls_rjt stat;
uint32_t *payload;
uint32_t cmd, did, newnode;
- uint8_t rjt_exp, rjt_err = 0;
+ uint8_t rjt_exp, rjt_err = 0, init_link = 0;
IOCB_t *icmd = &elsiocb->iocb;
+ LPFC_MBOXQ_t *mbox;
if (!vport || !(elsiocb->context2))
goto dropit;
@@ -7999,6 +8007,19 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
did, vport->port_state, ndlp->nlp_flag);
phba->fc_stat.elsRcvFLOGI++;
+
+ /* If the driver believes fabric discovery is done and is ready,
+ * bounce the link. There is some descrepancy.
+ */
+ if (vport->port_state >= LPFC_LOCAL_CFG_LINK &&
+ vport->fc_flag & FC_PT2PT &&
+ vport->rcv_flogi_cnt >= 1) {
+ rjt_err = LSRJT_LOGICAL_BSY;
+ rjt_exp = LSEXP_NOTHING_MORE;
+ init_link++;
+ goto lsrjt;
+ }
+
lpfc_els_rcv_flogi(vport, elsiocb, ndlp);
if (newnode)
lpfc_nlp_put(ndlp);
@@ -8227,6 +8248,27 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
lpfc_nlp_put(elsiocb->context1);
elsiocb->context1 = NULL;
+
+ /* Special case. Driver received an unsolicited command that
+ * unsupportable given the driver's current state. Reset the
+ * link and start over.
+ */
+ if (init_link) {
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return;
+ lpfc_linkdown(phba);
+ lpfc_init_link(phba, mbox,
+ phba->cfg_topology,
+ phba->cfg_link_speed);
+ mbox->u.mb.un.varInitLnk.lipsr_AL_PA = 0;
+ mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ mbox->vport = vport;
+ if (lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT) ==
+ MBX_NOT_FINISHED)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ }
+
return;
dropit:
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 38a9245fddba1..5ec60c221d846 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -952,6 +952,7 @@ lpfc_linkdown(struct lpfc_hba *phba)
}
spin_lock_irq(shost->host_lock);
phba->pport->fc_flag &= ~(FC_PT2PT | FC_PT2PT_PLOGI);
+ phba->pport->rcv_flogi_cnt = 0;
spin_unlock_irq(shost->host_lock);
}
return 0;
@@ -1023,6 +1024,7 @@ lpfc_linkup(struct lpfc_hba *phba)
{
struct lpfc_vport **vports;
int i;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(phba->pport);
phba->link_state = LPFC_LINK_UP;
@@ -1036,6 +1038,13 @@ lpfc_linkup(struct lpfc_hba *phba)
lpfc_linkup_port(vports[i]);
lpfc_destroy_vport_work_array(phba, vports);
+ /* Clear the pport flogi counter in case the link down was
+ * absorbed without an ACQE. No lock here - in worker thread
+ * and discovery is synchronized.
+ */
+ spin_lock_irq(shost->host_lock);
+ phba->pport->rcv_flogi_cnt = 0;
+ spin_unlock_irq(shost->host_lock);
return 0;
}
--
2.20.1
From: Huazhong Tan <[email protected]>
[ Upstream commit 0d4411408a7fb9aad0645f23911d9bfdd2ce3177 ]
The current driver supports handling two vector0 interrupts, reset and
mailbox. When the hardware reports an interrupt of another type of
interrupt source, if the driver does not process the interrupt, but
enables the interrupt, the hardware will repeatedly report the unknown
interrupt.
Therefore, the driver enables the vector0 interrupt after clearing the
known type of interrupt source. Other conditions are not enabled.
Fixes: cd8c5c269b1d ("net: hns3: Fix for hclge_reset running repeatly problem")
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 89ca69fa2b97b..0b622d20cd305 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2574,7 +2574,7 @@ static irqreturn_t hclge_misc_irq_handle(int irq, void *data)
}
/* clear the source of interrupt if it is not cause by reset */
- if (event_cause != HCLGE_VECTOR0_EVENT_RST) {
+ if (event_cause == HCLGE_VECTOR0_EVENT_MBX) {
hclge_clear_event_cause(hdev, event_cause, clearval);
hclge_enable_vector(&hdev->misc_vector, true);
}
--
2.20.1
From: Miroslav Lichvar <[email protected]>
[ Upstream commit 094bf4d0e9657f6ea1ee3d7e07ce3970796949ce ]
The timecounter needs to be updated at least once per ~550 seconds in
order to avoid a 40-bit SYSTIM timestamp to be misinterpreted as an old
timestamp.
Since commit 500462a9d ("timers: Switch to a non-cascading wheel"),
scheduling of delayed work seems to be less accurate and a requested
delay of 540 seconds may actually be longer than 550 seconds. Shorten
the delay to 480 seconds to be sure the timecounter is updated in time.
This fixes an issue with HW timestamps on 82580/I350/I354 being off by
~1100 seconds for few seconds every ~9 minutes.
Cc: Jacob Keller <[email protected]>
Cc: Richard Cochran <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Miroslav Lichvar <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/igb/igb_ptp.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index 9f4d700e09df3..29ced6b74d364 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -51,9 +51,15 @@
*
* The 40 bit 82580 SYSTIM overflows every
* 2^40 * 10^-9 / 60 = 18.3 minutes.
+ *
+ * SYSTIM is converted to real time using a timecounter. As
+ * timecounter_cyc2time() allows old timestamps, the timecounter
+ * needs to be updated at least once per half of the SYSTIM interval.
+ * Scheduling of delayed work is not very accurate, so we aim for 8
+ * minutes to be sure the actual interval is shorter than 9.16 minutes.
*/
-#define IGB_SYSTIM_OVERFLOW_PERIOD (HZ * 60 * 9)
+#define IGB_SYSTIM_OVERFLOW_PERIOD (HZ * 60 * 8)
#define IGB_PTP_TX_TIMEOUT (HZ * 15)
#define INCPERIOD_82576 BIT(E1000_TIMINCA_16NS_SHIFT)
#define INCVALUE_82576_MASK GENMASK(E1000_TIMINCA_16NS_SHIFT - 1, 0)
--
2.20.1
From: Nickhu <[email protected]>
[ Upstream commit 9aaafac8cffa1c1edb66e19a63841b7c86be07ca ]
There two bitfield bug for perfomance counter
in bitfield.h:
PFM_CTL_offSEL1 21 --> 16
PFM_CTL_offSEL2 27 --> 22
This commit fix it.
Signed-off-by: Nickhu <[email protected]>
Acked-by: Greentime Hu <[email protected]>
Signed-off-by: Greentime Hu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/nds32/include/asm/bitfield.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/nds32/include/asm/bitfield.h b/arch/nds32/include/asm/bitfield.h
index 8e84fc385b946..19b2841219adf 100644
--- a/arch/nds32/include/asm/bitfield.h
+++ b/arch/nds32/include/asm/bitfield.h
@@ -692,8 +692,8 @@
#define PFM_CTL_offKU1 13 /* Enable user mode event counting for PFMC1 */
#define PFM_CTL_offKU2 14 /* Enable user mode event counting for PFMC2 */
#define PFM_CTL_offSEL0 15 /* The event selection for PFMC0 */
-#define PFM_CTL_offSEL1 21 /* The event selection for PFMC1 */
-#define PFM_CTL_offSEL2 27 /* The event selection for PFMC2 */
+#define PFM_CTL_offSEL1 16 /* The event selection for PFMC1 */
+#define PFM_CTL_offSEL2 22 /* The event selection for PFMC2 */
/* bit 28:31 reserved */
#define PFM_CTL_mskEN0 ( 0x01 << PFM_CTL_offEN0 )
--
2.20.1
From: Huazhong Tan <[email protected]>
[ Upstream commit 73b907a083b8a8c1c62cb494bc9fbe6ae086c460 ]
When hns3_get_ring_config()/hns3_queue_to_ring()/
hns3_get_vector_ring_chain() failed during resetting, the allocated
memory has not been freed before these three functions return. So
this patch adds error handler in these functions to fix it.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/ethernet/hisilicon/hns3/hns3_enet.c | 24 ++++++++++++++++---
1 file changed, 21 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 0ccfa6a845353..c1873e04b0fb6 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -2558,7 +2558,7 @@ static int hns3_get_vector_ring_chain(struct hns3_enet_tqp_vector *tqp_vector,
chain = devm_kzalloc(&pdev->dev, sizeof(*chain),
GFP_KERNEL);
if (!chain)
- return -ENOMEM;
+ goto err_free_chain;
cur_chain->next = chain;
chain->tqp_index = tx_ring->tqp->tqp_index;
@@ -2588,7 +2588,7 @@ static int hns3_get_vector_ring_chain(struct hns3_enet_tqp_vector *tqp_vector,
while (rx_ring) {
chain = devm_kzalloc(&pdev->dev, sizeof(*chain), GFP_KERNEL);
if (!chain)
- return -ENOMEM;
+ goto err_free_chain;
cur_chain->next = chain;
chain->tqp_index = rx_ring->tqp->tqp_index;
@@ -2603,6 +2603,16 @@ static int hns3_get_vector_ring_chain(struct hns3_enet_tqp_vector *tqp_vector,
}
return 0;
+
+err_free_chain:
+ cur_chain = head->next;
+ while (cur_chain) {
+ chain = cur_chain->next;
+ devm_kfree(&pdev->dev, chain);
+ cur_chain = chain;
+ }
+
+ return -ENOMEM;
}
static void hns3_free_vector_ring_chain(struct hns3_enet_tqp_vector *tqp_vector,
@@ -2847,8 +2857,10 @@ static int hns3_queue_to_ring(struct hnae3_queue *tqp,
return ret;
ret = hns3_ring_get_cfg(tqp, priv, HNAE3_RING_TYPE_RX);
- if (ret)
+ if (ret) {
+ devm_kfree(priv->dev, priv->ring_data[tqp->tqp_index].ring);
return ret;
+ }
return 0;
}
@@ -2875,6 +2887,12 @@ static int hns3_get_ring_config(struct hns3_nic_priv *priv)
return 0;
err:
+ while (i--) {
+ devm_kfree(priv->dev, priv->ring_data[i].ring);
+ devm_kfree(priv->dev,
+ priv->ring_data[i + h->kinfo.num_tqps].ring);
+ }
+
devm_kfree(&pdev->dev, priv->ring_data);
return ret;
}
--
2.20.1
From: Guozhonghua <[email protected]>
[ Upstream commit 21158ca85b73ddd0088076a5209cfd040513a8b5 ]
During one dead node's recovery by other node, quota recovery work will
be queued. We should avoid calling quota when it is not supported, so
check the quota flags.
Link: http://lkml.kernel.org/r/71604351584F6A4EBAE558C676F37CA401071AC9FB@H3CMLB12-EX.srv.huawei-3com.com
Signed-off-by: guozhonghua <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Changwei Ge <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ocfs2/journal.c | 51 ++++++++++++++++++++++++++++++----------------
1 file changed, 34 insertions(+), 17 deletions(-)
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index c492cbb2410f6..babb0ec76d676 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -1379,15 +1379,23 @@ static int __ocfs2_recovery_thread(void *arg)
int rm_quota_used = 0, i;
struct ocfs2_quota_recovery *qrec;
+ /* Whether the quota supported. */
+ int quota_enabled = OCFS2_HAS_RO_COMPAT_FEATURE(osb->sb,
+ OCFS2_FEATURE_RO_COMPAT_USRQUOTA)
+ || OCFS2_HAS_RO_COMPAT_FEATURE(osb->sb,
+ OCFS2_FEATURE_RO_COMPAT_GRPQUOTA);
+
status = ocfs2_wait_on_mount(osb);
if (status < 0) {
goto bail;
}
- rm_quota = kcalloc(osb->max_slots, sizeof(int), GFP_NOFS);
- if (!rm_quota) {
- status = -ENOMEM;
- goto bail;
+ if (quota_enabled) {
+ rm_quota = kcalloc(osb->max_slots, sizeof(int), GFP_NOFS);
+ if (!rm_quota) {
+ status = -ENOMEM;
+ goto bail;
+ }
}
restart:
status = ocfs2_super_lock(osb, 1);
@@ -1423,9 +1431,14 @@ static int __ocfs2_recovery_thread(void *arg)
* then quota usage would be out of sync until some node takes
* the slot. So we remember which nodes need quota recovery
* and when everything else is done, we recover quotas. */
- for (i = 0; i < rm_quota_used && rm_quota[i] != slot_num; i++);
- if (i == rm_quota_used)
- rm_quota[rm_quota_used++] = slot_num;
+ if (quota_enabled) {
+ for (i = 0; i < rm_quota_used
+ && rm_quota[i] != slot_num; i++)
+ ;
+
+ if (i == rm_quota_used)
+ rm_quota[rm_quota_used++] = slot_num;
+ }
status = ocfs2_recover_node(osb, node_num, slot_num);
skip_recovery:
@@ -1453,16 +1466,19 @@ static int __ocfs2_recovery_thread(void *arg)
/* Now it is right time to recover quotas... We have to do this under
* superblock lock so that no one can start using the slot (and crash)
* before we recover it */
- for (i = 0; i < rm_quota_used; i++) {
- qrec = ocfs2_begin_quota_recovery(osb, rm_quota[i]);
- if (IS_ERR(qrec)) {
- status = PTR_ERR(qrec);
- mlog_errno(status);
- continue;
+ if (quota_enabled) {
+ for (i = 0; i < rm_quota_used; i++) {
+ qrec = ocfs2_begin_quota_recovery(osb, rm_quota[i]);
+ if (IS_ERR(qrec)) {
+ status = PTR_ERR(qrec);
+ mlog_errno(status);
+ continue;
+ }
+ ocfs2_queue_recovery_completion(osb->journal,
+ rm_quota[i],
+ NULL, NULL, qrec,
+ ORPHAN_NEED_TRUNCATE);
}
- ocfs2_queue_recovery_completion(osb->journal, rm_quota[i],
- NULL, NULL, qrec,
- ORPHAN_NEED_TRUNCATE);
}
ocfs2_super_unlock(osb, 1);
@@ -1484,7 +1500,8 @@ static int __ocfs2_recovery_thread(void *arg)
mutex_unlock(&osb->recovery_lock);
- kfree(rm_quota);
+ if (quota_enabled)
+ kfree(rm_quota);
/* no one is callint kthread_stop() for us so the kthread() api
* requires that we call do_exit(). And it isn't exported, but
--
2.20.1
From: Huazhong Tan <[email protected]>
[ Upstream commit 6d71ec6cbf74ac9c2823ef751b1baa5b889bb3ac ]
The HEAD pointer of the hardware command queue maybe equal to the command
queue's next_to_use in the driver, so that does not belong to the invalid
HEAD pointer, since the hardware may not process the command in time,
causing the HEAD pointer to be too late to update. The variables' name
in this function is unreadable, so give them a more readable one.
Fixes: 3ff504908f95 ("net: hns3: fix a dead loop in hclge_cmd_csq_clean")
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
index 68026a5ad7e77..690f62ed87dca 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
@@ -24,15 +24,15 @@ static int hclge_ring_space(struct hclge_cmq_ring *ring)
return ring->desc_num - used - 1;
}
-static int is_valid_csq_clean_head(struct hclge_cmq_ring *ring, int h)
+static int is_valid_csq_clean_head(struct hclge_cmq_ring *ring, int head)
{
- int u = ring->next_to_use;
- int c = ring->next_to_clean;
+ int ntu = ring->next_to_use;
+ int ntc = ring->next_to_clean;
- if (unlikely(h >= ring->desc_num))
- return 0;
+ if (ntu > ntc)
+ return head >= ntc && head <= ntu;
- return u > c ? (h > c && h <= u) : (h > c || h <= u);
+ return head >= ntc || head <= ntu;
}
static int hclge_alloc_cmd_desc(struct hclge_cmq_ring *ring)
--
2.20.1
From: Joel Stanley <[email protected]>
[ Upstream commit 27825349d7b238533a47e3d98b8bb0efd886b752 ]
We should use TEST_GEN_PROGS, not TEST_PROGS. That tells the selftests
makefile (lib.mk) that those tests are generated (built), and so it
adds the $(OUTPUT) prefix for us, making the out-of-tree build work
correctly.
It also means we don't need our own clean rule, lib.mk does it.
We also have to update the signal_tm rule to use $(OUTPUT).
Signed-off-by: Joel Stanley <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/powerpc/signal/Makefile | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)
diff --git a/tools/testing/selftests/powerpc/signal/Makefile b/tools/testing/selftests/powerpc/signal/Makefile
index 1fca25c6ace06..209a958dca127 100644
--- a/tools/testing/selftests/powerpc/signal/Makefile
+++ b/tools/testing/selftests/powerpc/signal/Makefile
@@ -1,15 +1,10 @@
# SPDX-License-Identifier: GPL-2.0
-TEST_PROGS := signal signal_tm
-
-all: $(TEST_PROGS)
-
-$(TEST_PROGS): ../harness.c ../utils.c signal.S
+TEST_GEN_PROGS := signal signal_tm
CFLAGS += -maltivec
-signal_tm: CFLAGS += -mhtm
+$(OUTPUT)/signal_tm: CFLAGS += -mhtm
top_srcdir = ../../../../..
include ../../lib.mk
-clean:
- rm -f $(TEST_PROGS) *.o
+$(TEST_GEN_PROGS): ../harness.c ../utils.c signal.S
--
2.20.1
From: Masahiro Yamada <[email protected]>
[ Upstream commit eaba68785c2d24ebf1f0d46c24e11b79cc2f94c7 ]
The current IRQ handler clears all the IRQ status bits when it bails
out. This is dangerous because it might clear away the status bits
that have just been set while processing the current handler. If this
happens, the IRQ event for the latest transfer is lost forever.
The IRQ status bits must be cleared *before* the next transfer is
kicked.
Fixes: 6a62974b667f ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver")
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-uniphier-f.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c
index bbd5b137aa216..928ea9930d17e 100644
--- a/drivers/i2c/busses/i2c-uniphier-f.c
+++ b/drivers/i2c/busses/i2c-uniphier-f.c
@@ -143,9 +143,10 @@ static void uniphier_fi2c_set_irqs(struct uniphier_fi2c_priv *priv)
writel(priv->enabled_irqs, priv->membase + UNIPHIER_FI2C_IE);
}
-static void uniphier_fi2c_clear_irqs(struct uniphier_fi2c_priv *priv)
+static void uniphier_fi2c_clear_irqs(struct uniphier_fi2c_priv *priv,
+ u32 mask)
{
- writel(-1, priv->membase + UNIPHIER_FI2C_IC);
+ writel(mask, priv->membase + UNIPHIER_FI2C_IC);
}
static void uniphier_fi2c_stop(struct uniphier_fi2c_priv *priv)
@@ -172,6 +173,8 @@ static irqreturn_t uniphier_fi2c_interrupt(int irq, void *dev_id)
"interrupt: enabled_irqs=%04x, irq_status=%04x\n",
priv->enabled_irqs, irq_status);
+ uniphier_fi2c_clear_irqs(priv, irq_status);
+
if (irq_status & UNIPHIER_FI2C_INT_STOP)
goto complete;
@@ -250,8 +253,6 @@ static irqreturn_t uniphier_fi2c_interrupt(int irq, void *dev_id)
}
handled:
- uniphier_fi2c_clear_irqs(priv);
-
spin_unlock(&priv->lock);
return IRQ_HANDLED;
@@ -340,7 +341,7 @@ static int uniphier_fi2c_master_xfer_one(struct i2c_adapter *adap,
priv->flags |= UNIPHIER_FI2C_STOP;
reinit_completion(&priv->comp);
- uniphier_fi2c_clear_irqs(priv);
+ uniphier_fi2c_clear_irqs(priv, U32_MAX);
writel(UNIPHIER_FI2C_RST_TBRST | UNIPHIER_FI2C_RST_RBRST,
priv->membase + UNIPHIER_FI2C_RST); /* reset TX/RX FIFO */
--
2.20.1
From: Masahiro Yamada <[email protected]>
[ Upstream commit 39226aaa85f002d695e3cafade3309e12ffdaecd ]
Currently, a timeout error could happen at a repeated START condition.
For a (non-repeated) START condition, the controller starts sending
data when the UNIPHIER_FI2C_CR_STA bit is set. However, for a repeated
START condition, the hardware starts running when the slave address is
written to the TX FIFO - the write to the UNIPHIER_FI2C_CR register is
actually unneeded.
Because the hardware is already running before the IRQ is enabled for
a repeated START, the driver may miss the IRQ event. In most cases,
this problem does not show up since modern CPUs are much faster than
the I2C transfer. However, it is still possible that a context switch
happens after the controller starts, but before the IRQ register is
set up.
To fix this,
- Do not write UNIPHIER_FI2C_CR for repeated START conditions.
- Enable IRQ *before* writing the slave address to the TX FIFO.
- Disable IRQ for the current CPU while queuing up the TX FIFO;
If the CPU is interrupted by some task, the interrupt handler
might be invoked due to the empty TX FIFO before completing the
setup.
Fixes: 6a62974b667f ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver")
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-uniphier-f.c | 33 ++++++++++++++++++++++-------
1 file changed, 25 insertions(+), 8 deletions(-)
diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c
index b9a0690b4fd73..bbd5b137aa216 100644
--- a/drivers/i2c/busses/i2c-uniphier-f.c
+++ b/drivers/i2c/busses/i2c-uniphier-f.c
@@ -260,6 +260,8 @@ static irqreturn_t uniphier_fi2c_interrupt(int irq, void *dev_id)
static void uniphier_fi2c_tx_init(struct uniphier_fi2c_priv *priv, u16 addr)
{
priv->enabled_irqs |= UNIPHIER_FI2C_INT_TE;
+ uniphier_fi2c_set_irqs(priv);
+
/* do not use TX byte counter */
writel(0, priv->membase + UNIPHIER_FI2C_TBC);
/* set slave address */
@@ -292,6 +294,8 @@ static void uniphier_fi2c_rx_init(struct uniphier_fi2c_priv *priv, u16 addr)
priv->enabled_irqs |= UNIPHIER_FI2C_INT_RF;
}
+ uniphier_fi2c_set_irqs(priv);
+
/* set slave address with RD bit */
writel(UNIPHIER_FI2C_DTTX_CMD | UNIPHIER_FI2C_DTTX_RD | addr << 1,
priv->membase + UNIPHIER_FI2C_DTTX);
@@ -315,14 +319,16 @@ static void uniphier_fi2c_recover(struct uniphier_fi2c_priv *priv)
}
static int uniphier_fi2c_master_xfer_one(struct i2c_adapter *adap,
- struct i2c_msg *msg, bool stop)
+ struct i2c_msg *msg, bool repeat,
+ bool stop)
{
struct uniphier_fi2c_priv *priv = i2c_get_adapdata(adap);
bool is_read = msg->flags & I2C_M_RD;
unsigned long time_left, flags;
- dev_dbg(&adap->dev, "%s: addr=0x%02x, len=%d, stop=%d\n",
- is_read ? "receive" : "transmit", msg->addr, msg->len, stop);
+ dev_dbg(&adap->dev, "%s: addr=0x%02x, len=%d, repeat=%d, stop=%d\n",
+ is_read ? "receive" : "transmit", msg->addr, msg->len,
+ repeat, stop);
priv->len = msg->len;
priv->buf = msg->buf;
@@ -338,16 +344,24 @@ static int uniphier_fi2c_master_xfer_one(struct i2c_adapter *adap,
writel(UNIPHIER_FI2C_RST_TBRST | UNIPHIER_FI2C_RST_RBRST,
priv->membase + UNIPHIER_FI2C_RST); /* reset TX/RX FIFO */
+ spin_lock_irqsave(&priv->lock, flags);
+
if (is_read)
uniphier_fi2c_rx_init(priv, msg->addr);
else
uniphier_fi2c_tx_init(priv, msg->addr);
- uniphier_fi2c_set_irqs(priv);
-
dev_dbg(&adap->dev, "start condition\n");
- writel(UNIPHIER_FI2C_CR_MST | UNIPHIER_FI2C_CR_STA,
- priv->membase + UNIPHIER_FI2C_CR);
+ /*
+ * For a repeated START condition, writing a slave address to the FIFO
+ * kicks the controller. So, the UNIPHIER_FI2C_CR register should be
+ * written only for a non-repeated START condition.
+ */
+ if (!repeat)
+ writel(UNIPHIER_FI2C_CR_MST | UNIPHIER_FI2C_CR_STA,
+ priv->membase + UNIPHIER_FI2C_CR);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
time_left = wait_for_completion_timeout(&priv->comp, adap->timeout);
@@ -408,6 +422,7 @@ static int uniphier_fi2c_master_xfer(struct i2c_adapter *adap,
struct i2c_msg *msgs, int num)
{
struct i2c_msg *msg, *emsg = msgs + num;
+ bool repeat = false;
int ret;
ret = uniphier_fi2c_check_bus_busy(adap);
@@ -418,9 +433,11 @@ static int uniphier_fi2c_master_xfer(struct i2c_adapter *adap,
/* Emit STOP if it is the last message or I2C_M_STOP is set. */
bool stop = (msg + 1 == emsg) || (msg->flags & I2C_M_STOP);
- ret = uniphier_fi2c_master_xfer_one(adap, msg, stop);
+ ret = uniphier_fi2c_master_xfer_one(adap, msg, repeat, stop);
if (ret)
return ret;
+
+ repeat = !stop;
}
return num;
--
2.20.1
From: "Darrick J. Wong" <[email protected]>
[ Upstream commit 07d19dc9fbe9128378b9e226abe886fd8fd473df ]
A deduplication data corruption is exposed in XFS and btrfs. It is
caused by extending the block match range to include the partial EOF
block, but then allowing unknown data beyond EOF to be considered a
"match" to data in the destination file because the comparison is only
made to the end of the source file. This corrupts the destination file
when the source extent is shared with it.
The VFS remapping prep functions only support whole block dedupe, but
we still need to appear to support whole file dedupe correctly. Hence
if the dedupe request includes the last block of the souce file, don't
include it in the actual dedupe operation. If the rest of the range
dedupes successfully, then reject the entire request. A subsequent
patch will enable us to shorten dedupe requests correctly.
When reflinking sub-file ranges, a data corruption can occur when the
source file range includes a partial EOF block. This shares the unknown
data beyond EOF into the second file at a position inside EOF, exposing
stale data in the second file.
If the reflink request includes the last block of the souce file, only
proceed with the reflink operation if it lands at or past the
destination file's current EOF. If it lands within the destination file
EOF, reject the entire request with -EINVAL and make the caller go the
hard way. A subsequent patch will enable us to shorten reflink requests
correctly.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/read_write.c | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/fs/read_write.c b/fs/read_write.c
index 5fb5ee5b8cd70..2195380620d02 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -1715,6 +1715,34 @@ static int clone_verify_area(struct file *file, loff_t pos, u64 len, bool write)
return security_file_permission(file, write ? MAY_WRITE : MAY_READ);
}
+/*
+ * Ensure that we don't remap a partial EOF block in the middle of something
+ * else. Assume that the offsets have already been checked for block
+ * alignment.
+ *
+ * For deduplication we always scale down to the previous block because we
+ * can't meaningfully compare post-EOF contents.
+ *
+ * For clone we only link a partial EOF block above the destination file's EOF.
+ */
+static int generic_remap_check_len(struct inode *inode_in,
+ struct inode *inode_out,
+ loff_t pos_out,
+ u64 *len,
+ bool is_dedupe)
+{
+ u64 blkmask = i_blocksize(inode_in) - 1;
+
+ if ((*len & blkmask) == 0)
+ return 0;
+
+ if (is_dedupe)
+ *len &= ~blkmask;
+ else if (pos_out + *len < i_size_read(inode_out))
+ return -EINVAL;
+
+ return 0;
+}
/*
* Check that the two inodes are eligible for cloning, the ranges make
@@ -1821,6 +1849,11 @@ int vfs_clone_file_prep_inodes(struct inode *inode_in, loff_t pos_in,
return -EBADE;
}
+ ret = generic_remap_check_len(inode_in, inode_out, pos_out, len,
+ is_dedupe);
+ if (ret)
+ return ret;
+
return 1;
}
EXPORT_SYMBOL(vfs_clone_file_prep_inodes);
--
2.20.1
From: Sabrina Dubroca <[email protected]>
[ Upstream commit e6ac075882b2afcdf2d5ab328ce4ab42a1eb9593 ]
Like all other virtual devices (macvlan, vlan), the operstate of a
macsec device should match the state of its lower device. This is done
by calling netif_stacked_transfer_operstate from its netdevice notifier.
We also need to call netif_stacked_transfer_operstate when a new macsec
device is created, so that its operstate is set properly. This is only
relevant when we try to bring the device up directly when we create it.
Radu Rendec proposed a similar patch, inspired from the 802.1q driver,
that included changing the administrative state of the macsec device,
instead of just the operstate. This version is similar to what the
macvlan driver does, and updates only the operstate.
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Reported-by: Radu Rendec <[email protected]>
Reported-by: Patrick Talbert <[email protected]>
Signed-off-by: Sabrina Dubroca <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/macsec.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
index 05115fb0c97a9..50acd8c9d7f53 100644
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -3305,6 +3305,9 @@ static int macsec_newlink(struct net *net, struct net_device *dev,
if (err < 0)
goto del_dev;
+ netif_stacked_transfer_operstate(real_dev, dev);
+ linkwatch_fire_event(dev);
+
macsec_generation++;
return 0;
@@ -3489,6 +3492,20 @@ static int macsec_notify(struct notifier_block *this, unsigned long event,
return NOTIFY_DONE;
switch (event) {
+ case NETDEV_DOWN:
+ case NETDEV_UP:
+ case NETDEV_CHANGE: {
+ struct macsec_dev *m, *n;
+ struct macsec_rxh_data *rxd;
+
+ rxd = macsec_data_rtnl(real_dev);
+ list_for_each_entry_safe(m, n, &rxd->secys, secys) {
+ struct net_device *dev = m->secy.netdev;
+
+ netif_stacked_transfer_operstate(real_dev, dev);
+ }
+ break;
+ }
case NETDEV_UNREGISTER: {
struct macsec_dev *m, *n;
struct macsec_rxh_data *rxd;
--
2.20.1
From: Keith Busch <[email protected]>
[ Upstream commit 319e0bec1aecb36c5ac6d23812af487ff2c8f47f ]
If the '-w' parameter was provided, the benchmark would exit due to a
mssing 'break'.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Keith Busch <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Dan Williams <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/vm/gup_benchmark.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/testing/selftests/vm/gup_benchmark.c b/tools/testing/selftests/vm/gup_benchmark.c
index 9601bc24454d9..17da711f26afb 100644
--- a/tools/testing/selftests/vm/gup_benchmark.c
+++ b/tools/testing/selftests/vm/gup_benchmark.c
@@ -51,6 +51,7 @@ int main(int argc, char **argv)
break;
case 'w':
write = 1;
+ break;
default:
return -1;
}
--
2.20.1
From: Andrea Arcangeli <[email protected]>
[ Upstream commit 7066f0f933a1fd707bb38781866657769cff7efc ]
change_huge_pmd() after arming the numa/protnone pmd doesn't flush the TLB
right away. do_huge_pmd_numa_page() flushes the TLB before calling
migrate_misplaced_transhuge_page(). By the time do_huge_pmd_numa_page()
runs some CPU could still access the page through the TLB.
change_huge_pmd() before arming the numa/protnone transhuge pmd calls
mmu_notifier_invalidate_range_start(). So there's no need of
mmu_notifier_invalidate_range_start()/mmu_notifier_invalidate_range_only_end()
sequence in migrate_misplaced_transhuge_page() too, because by the time
migrate_misplaced_transhuge_page() runs, the pmd mapping has already been
invalidated in the secondary MMUs. It has to or if a secondary MMU can
still write to the page, the migrate_page_copy() would lose data.
However an explicit mmu_notifier_invalidate_range() is needed before
migrate_misplaced_transhuge_page() starts copying the data of the
transhuge page or the below can happen for MMU notifier users sharing the
primary MMU pagetables and only implementing ->invalidate_range:
CPU0 CPU1 GPU sharing linux pagetables using
only ->invalidate_range
----------- ------------ ---------
GPU secondary MMU writes to the page
mapped by the transhuge pmd
change_pmd_range()
mmu..._range_start()
->invalidate_range_start() noop
change_huge_pmd()
set_pmd_at(numa/protnone)
pmd_unlock()
do_huge_pmd_numa_page()
CPU TLB flush globally (1)
CPU cannot write to page
migrate_misplaced_transhuge_page()
GPU writes to the page...
migrate_page_copy()
...GPU stops writing to the page
CPU TLB flush (2)
mmu..._range_end() (3)
->invalidate_range_stop() noop
->invalidate_range()
GPU secondary MMU is invalidated
and cannot write to the page anymore
(too late)
Just like we need a CPU TLB flush (1) because the TLB flush (2) arrives
too late, we also need a mmu_notifier_invalidate_range() before calling
migrate_misplaced_transhuge_page(), because the ->invalidate_range() in
(3) also arrives too late.
This requirement is the result of the lazy optimization in
change_huge_pmd() that releases the pmd_lock without first flushing the
TLB and without first calling mmu_notifier_invalidate_range().
Even converting the removed mmu_notifier_invalidate_range_only_end() into
a mmu_notifier_invalidate_range_end() would not have been enough to fix
this, because it run after migrate_page_copy().
After the hugepage data copy is done migrate_misplaced_transhuge_page()
can proceed and call set_pmd_at without having to flush the TLB nor any
secondary MMUs because the secondary MMU invalidate, just like the CPU TLB
flush, has to happen before the migrate_page_copy() is called or it would
be a bug in the first place (and it was for drivers using
->invalidate_range()).
KVM is unaffected because it doesn't implement ->invalidate_range().
The standard PAGE_SIZEd migrate_misplaced_page is less accelerated and
uses the generic migrate_pages which transitions the pte from
numa/protnone to a migration entry in try_to_unmap_one() and flushes TLBs
and all mmu notifiers there before copying the page.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Andrea Arcangeli <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Reviewed-by: Aaron Tomlin <[email protected]>
Cc: Jerome Glisse <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/huge_memory.c | 14 +++++++++++++-
mm/migrate.c | 19 ++++++-------------
2 files changed, 19 insertions(+), 14 deletions(-)
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 09ce8528bbdd9..4a3bf480d0ea0 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -1603,8 +1603,20 @@ vm_fault_t do_huge_pmd_numa_page(struct vm_fault *vmf, pmd_t pmd)
* We are not sure a pending tlb flush here is for a huge page
* mapping or not. Hence use the tlb range variant
*/
- if (mm_tlb_flush_pending(vma->vm_mm))
+ if (mm_tlb_flush_pending(vma->vm_mm)) {
flush_tlb_range(vma, haddr, haddr + HPAGE_PMD_SIZE);
+ /*
+ * change_huge_pmd() released the pmd lock before
+ * invalidating the secondary MMUs sharing the primary
+ * MMU pagetables (with ->invalidate_range()). The
+ * mmu_notifier_invalidate_range_end() (which
+ * internally calls ->invalidate_range()) in
+ * change_pmd_range() will run after us, so we can't
+ * rely on it here and we need an explicit invalidate.
+ */
+ mmu_notifier_invalidate_range(vma->vm_mm, haddr,
+ haddr + HPAGE_PMD_SIZE);
+ }
/*
* Migrate the THP to the requested node, returns with page unlocked
diff --git a/mm/migrate.c b/mm/migrate.c
index 4d3588c012034..22440a5efb498 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -1992,8 +1992,8 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm,
int isolated = 0;
struct page *new_page = NULL;
int page_lru = page_is_file_cache(page);
- unsigned long mmun_start = address & HPAGE_PMD_MASK;
- unsigned long mmun_end = mmun_start + HPAGE_PMD_SIZE;
+ unsigned long start = address & HPAGE_PMD_MASK;
+ unsigned long end = start + HPAGE_PMD_SIZE;
new_page = alloc_pages_node(node,
(GFP_TRANSHUGE_LIGHT | __GFP_THISNODE),
@@ -2020,11 +2020,9 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm,
WARN_ON(PageLRU(new_page));
/* Recheck the target PMD */
- mmu_notifier_invalidate_range_start(mm, mmun_start, mmun_end);
ptl = pmd_lock(mm, pmd);
if (unlikely(!pmd_same(*pmd, entry) || !page_ref_freeze(page, 2))) {
spin_unlock(ptl);
- mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);
/* Reverse changes made by migrate_page_copy() */
if (TestClearPageActive(new_page))
@@ -2055,8 +2053,8 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm,
* new page and page_add_new_anon_rmap guarantee the copy is
* visible before the pagetable update.
*/
- flush_cache_range(vma, mmun_start, mmun_end);
- page_add_anon_rmap(new_page, vma, mmun_start, true);
+ flush_cache_range(vma, start, end);
+ page_add_anon_rmap(new_page, vma, start, true);
/*
* At this point the pmd is numa/protnone (i.e. non present) and the TLB
* has already been flushed globally. So no TLB can be currently
@@ -2068,7 +2066,7 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm,
* MADV_DONTNEED won't wait on the pmd lock and it'll skip clearing this
* pmd.
*/
- set_pmd_at(mm, mmun_start, pmd, entry);
+ set_pmd_at(mm, start, pmd, entry);
update_mmu_cache_pmd(vma, address, &entry);
page_ref_unfreeze(page, 2);
@@ -2077,11 +2075,6 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm,
set_page_owner_migrate_reason(new_page, MR_NUMA_MISPLACED);
spin_unlock(ptl);
- /*
- * No need to double call mmu_notifier->invalidate_range() callback as
- * the above pmdp_huge_clear_flush_notify() did already call it.
- */
- mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);
/* Take an "isolate" reference and put new page on the LRU. */
get_page(new_page);
@@ -2105,7 +2098,7 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm,
ptl = pmd_lock(mm, pmd);
if (pmd_same(*pmd, entry)) {
entry = pmd_modify(entry, vma->vm_page_prot);
- set_pmd_at(mm, mmun_start, pmd, entry);
+ set_pmd_at(mm, start, pmd, entry);
update_mmu_cache_pmd(vma, address, &entry);
}
spin_unlock(ptl);
--
2.20.1
From: Peng Hao <[email protected]>
[ Upstream commit 0387662d1b6c5ad2950d8e94d5e380af3f15c05c ]
Makefile contains -D_GNU_SOURCE. remove define "_GNU_SOURCE"
in c files.
Signed-off-by: Peng Hao <[email protected]>
Signed-off-by: Shuah Khan (Samsung OSG) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/proc/fd-001-lookup.c | 2 +-
tools/testing/selftests/proc/fd-003-kthread.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/proc/fd-001-lookup.c b/tools/testing/selftests/proc/fd-001-lookup.c
index a2010dfb21104..60d7948e7124f 100644
--- a/tools/testing/selftests/proc/fd-001-lookup.c
+++ b/tools/testing/selftests/proc/fd-001-lookup.c
@@ -14,7 +14,7 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
// Test /proc/*/fd lookup.
-#define _GNU_SOURCE
+
#undef NDEBUG
#include <assert.h>
#include <dirent.h>
diff --git a/tools/testing/selftests/proc/fd-003-kthread.c b/tools/testing/selftests/proc/fd-003-kthread.c
index 1d659d55368c2..dc591f97b63d4 100644
--- a/tools/testing/selftests/proc/fd-003-kthread.c
+++ b/tools/testing/selftests/proc/fd-003-kthread.c
@@ -14,7 +14,7 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
// Test that /proc/$KERNEL_THREAD/fd/ is empty.
-#define _GNU_SOURCE
+
#undef NDEBUG
#include <sys/syscall.h>
#include <assert.h>
--
2.20.1
From: Anton Ivanov <[email protected]>
[ Upstream commit 917e2fd2c53eb3c4162f5397555cbd394390d4bc ]
This fixes a long standing bug where large amounts of output
could freeze the tty (most commonly seen on stdio console).
While the bug has always been there it became more pronounced
after moving to the new interrupt controller.
The line semantics are now changed to have true IRQ write
semantics which should further improve the tty/line subsystem
stability and performance
Signed-off-by: Anton Ivanov <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/um/drivers/line.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 8d80b27502e6a..7e524efed5848 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -261,7 +261,7 @@ static irqreturn_t line_write_interrupt(int irq, void *data)
if (err == 0) {
spin_unlock(&line->lock);
return IRQ_NONE;
- } else if (err < 0) {
+ } else if ((err < 0) && (err != -EAGAIN)) {
line->head = line->buffer;
line->tail = line->buffer;
}
@@ -284,7 +284,7 @@ int line_setup_irq(int fd, int input, int output, struct line *line, void *data)
if (err)
return err;
if (output)
- err = um_request_irq(driver->write_irq, fd, IRQ_NONE,
+ err = um_request_irq(driver->write_irq, fd, IRQ_WRITE,
line_write_interrupt, IRQF_SHARED,
driver->write_irq_name, data);
return err;
--
2.20.1
From: Tristram Ha <[email protected]>
[ Upstream commit 899ecaedd15599c22553d158f53b127cc1632dc2 ]
Socket buffer is not re-created when headroom is 2 and tailroom is 1.
Signed-off-by: Tristram Ha <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/cadence/macb_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 74eeb3a985bf1..f175b20ac510a 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -1721,7 +1721,7 @@ static int macb_pad_and_fcs(struct sk_buff **skb, struct net_device *ndev)
padlen = 0;
/* No room for FCS, need to reallocate skb. */
else
- padlen = ETH_FCS_LEN - tailroom;
+ padlen = ETH_FCS_LEN;
} else {
/* Add room for FCS. */
padlen += ETH_FCS_LEN;
--
2.20.1
From: Florian Fainelli <[email protected]>
[ Upstream commit fb14ada11d62fb849fc357a25ef8016ba438ba10 ]
When the kernel is built with CONFIG_THUMB2_KERNEL we would set the
kernel's resume entry point to be a function that is already built as
Thumb-2 code while the boot agent doing the resume is in ARM mode, so
this does not work. There is a header label defined: cpu_resume_arm
which we can use to do the switching for us.
Fixes: 0b741b8234c8 ("soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/bcm/brcmstb/pm/pm-arm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/bcm/brcmstb/pm/pm-arm.c b/drivers/soc/bcm/brcmstb/pm/pm-arm.c
index a5577dd5eb087..8ee06347447c0 100644
--- a/drivers/soc/bcm/brcmstb/pm/pm-arm.c
+++ b/drivers/soc/bcm/brcmstb/pm/pm-arm.c
@@ -404,7 +404,7 @@ noinline int brcmstb_pm_s3_finish(void)
{
struct brcmstb_s3_params *params = ctrl.s3_params;
dma_addr_t params_pa = ctrl.s3_params_pa;
- phys_addr_t reentry = virt_to_phys(&cpu_resume);
+ phys_addr_t reentry = virt_to_phys(&cpu_resume_arm);
enum bsp_initiate_command cmd;
u32 flags;
--
2.20.1
From: Icenowy Zheng <[email protected]>
[ Upstream commit 859783d1390035e29ba850963bded2b4ffdf43b5 ]
In the user manual of A64 SoC, the bit 22 and 23 of pll-mipi control
register is called "LDO{1,2}_EN", and according to the BSP source code
from Allwinner , the LDOs are enabled during the clock's enabling
process.
The clock failed to generate output if the two LDOs are not enabled.
Add the two bits to the clock's gate bits, so that the LDOs are enabled
when the PLL is enabled.
Fixes: c6a0637460c2 ("clk: sunxi-ng: Add A64 clocks")
Signed-off-by: Icenowy Zheng <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
index ee9c12cf3f08c..2a60981799216 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -158,7 +158,12 @@ static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
#define SUN50I_A64_PLL_MIPI_REG 0x040
static struct ccu_nkm pll_mipi_clk = {
- .enable = BIT(31),
+ /*
+ * The bit 23 and 22 are called "LDO{1,2}_EN" on the SoC's
+ * user manual, and by experiments the PLL doesn't work without
+ * these bits toggled.
+ */
+ .enable = BIT(31) | BIT(23) | BIT(22),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT(8, 4),
.k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
--
2.20.1
From: "Shuah Khan (Samsung OSG)" <[email protected]>
[ Upstream commit 9a244229a4b850b11952a0df79607c69b18fd8df ]
When /dev/watchdog open fails, watchdog exits with "watchdog not enabled"
message. This is incorrect when open fails due to insufficient privilege.
Fix message to clearly state the reason when open fails with EACCESS when
a non-root user runs it.
Signed-off-by: Shuah Khan (Samsung OSG) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/watchdog/watchdog-test.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/watchdog/watchdog-test.c b/tools/testing/selftests/watchdog/watchdog-test.c
index 6e290874b70e2..e029e2017280f 100644
--- a/tools/testing/selftests/watchdog/watchdog-test.c
+++ b/tools/testing/selftests/watchdog/watchdog-test.c
@@ -89,7 +89,13 @@ int main(int argc, char *argv[])
fd = open("/dev/watchdog", O_WRONLY);
if (fd == -1) {
- printf("Watchdog device not enabled.\n");
+ if (errno == ENOENT)
+ printf("Watchdog device not enabled.\n");
+ else if (errno == EACCES)
+ printf("Run watchdog as root.\n");
+ else
+ printf("Watchdog device open failed %s\n",
+ strerror(errno));
exit(-1);
}
--
2.20.1
From: Keiji Hayashibara <[email protected]>
[ Upstream commit 3511ba7d4ca6f39e2d060bb94e42a41ad1fee7bf ]
This commit fixes incorrect property because it was different
from the actual.
The parameters of '#address-cells' and '#size-cells' were removed,
and 'interrupts', 'pinctrl-names' and 'pinctrl-0' were added.
Fixes: 4dcd5c2781f3 ("spi: add DT bindings for UniPhier SPI controller")
Signed-off-by: Keiji Hayashibara <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../devicetree/bindings/spi/spi-uniphier.txt | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
index 504a4ecfc7b16..b04e66a52de5d 100644
--- a/Documentation/devicetree/bindings/spi/spi-uniphier.txt
+++ b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
@@ -5,18 +5,20 @@ UniPhier SoCs have SCSSI which supports SPI single channel.
Required properties:
- compatible: should be "socionext,uniphier-scssi"
- reg: address and length of the spi master registers
- - #address-cells: must be <1>, see spi-bus.txt
- - #size-cells: must be <0>, see spi-bus.txt
- - clocks: A phandle to the clock for the device.
- - resets: A phandle to the reset control for the device.
+ - interrupts: a single interrupt specifier
+ - pinctrl-names: should be "default"
+ - pinctrl-0: pin control state for the default mode
+ - clocks: a phandle to the clock for the device
+ - resets: a phandle to the reset control for the device
Example:
spi0: spi@54006000 {
compatible = "socionext,uniphier-scssi";
reg = <0x54006000 0x100>;
- #address-cells = <1>;
- #size-cells = <0>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
clocks = <&peri_clk 11>;
resets = <&peri_rst 11>;
};
--
2.20.1
From: Victor Kamensky <[email protected]>
[ Upstream commit 98356eb0ae499c63e78073ccedd9a5fc5c563288 ]
After 'a66649dab350 arm64: fix vdso-offsets.h dependency' if
one will try to build .i file in case of external kernel module,
build fails complaining that prepare0 target is missing. This
issue came up with SystemTap when it tries to build variety
of .i files for its own generated kernel modules trying to
figure given kernel features/capabilities.
The issue is that prepare0 is defined in top level Makefile
only if KBUILD_EXTMOD is not defined. .i file rule depends
on prepare and in case KBUILD_EXTMOD defined top level Makefile
contains empty rule for prepare. But after mentioned commit
arch/arm64/Makefile would introduce dependency on prepare0
through its own prepare target.
Fix it to put proper ifdef KBUILD_EXTMOD around code introduced
by mentioned commit. It matches what top level Makefile does.
Acked-by: Kevin Brodsky <[email protected]>
Signed-off-by: Victor Kamensky <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/Makefile | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 5d8787f0ca5f9..9a5e281412116 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -148,6 +148,7 @@ archclean:
$(Q)$(MAKE) $(clean)=$(boot)
$(Q)$(MAKE) $(clean)=$(boot)/dts
+ifeq ($(KBUILD_EXTMOD),)
# We need to generate vdso-offsets.h before compiling certain files in kernel/.
# In order to do that, we should use the archprepare target, but we can't since
# asm-offsets.h is included in some files used to generate vdso-offsets.h, and
@@ -157,6 +158,7 @@ archclean:
prepare: vdso_prepare
vdso_prepare: prepare0
$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso include/generated/vdso-offsets.h
+endif
define archhelp
echo '* Image.gz - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'
--
2.20.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit aeb5e02aca91522733eb1db595ac607d30c87767 ]
Clang warns (trimmed for brevity):
drivers/isdn/mISDN/tei.c:1193:7: warning: overflow converting case value
to switch condition type (2147764552 to 18446744071562348872) [-Wswitch]
case IMHOLD_L1:
^
drivers/isdn/mISDN/tei.c:1187:7: warning: overflow converting case value
to switch condition type (2147764550 to 18446744071562348870) [-Wswitch]
case IMCLEAR_L2:
^
2 warnings generated.
The root cause is that the _IOC macro can generate really large numbers,
which don't find into type int. My research into how GCC and Clang are
handling this at a low level didn't prove fruitful and surveying the
kernel tree shows that aside from here and a few places in the scsi
subsystem, everything that uses _IOC is at least of type 'unsigned int'.
Make that change here because as nothing in this function cares about
the signedness of the variable and it removes ambiguity, which is never
good when dealing with compilers.
While we're here, remove the unnecessary local variable ret (just return
-EINVAL and 0 directly).
Link: https://github.com/ClangBuiltLinux/linux/issues/67
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/isdn/mISDN/tei.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/isdn/mISDN/tei.c b/drivers/isdn/mISDN/tei.c
index 12d9e5f4beb1f..58635b5f296f0 100644
--- a/drivers/isdn/mISDN/tei.c
+++ b/drivers/isdn/mISDN/tei.c
@@ -1180,8 +1180,7 @@ static int
ctrl_teimanager(struct manager *mgr, void *arg)
{
/* currently we only have one option */
- int *val = (int *)arg;
- int ret = 0;
+ unsigned int *val = (unsigned int *)arg;
switch (val[0]) {
case IMCLEAR_L2:
@@ -1197,9 +1196,9 @@ ctrl_teimanager(struct manager *mgr, void *arg)
test_and_clear_bit(OPTION_L1_HOLD, &mgr->options);
break;
default:
- ret = -EINVAL;
+ return -EINVAL;
}
- return ret;
+ return 0;
}
/* This function does create a L2 for fixed TEI in NT Mode */
--
2.20.1
From: Chao Yu <[email protected]>
[ Upstream commit 9149a5eb606152df158eb7d7da5a34e84b574189 ]
This patch changes codes as below:
- use f2fs_set_inode_flags() to update i_flags atomically to avoid
potential race.
- synchronize F2FS_I(inode)->i_flags to inode->i_flags in
f2fs_new_inode().
- use f2fs_set_inode_flags() to simply codes in f2fs_quota_{on,off}.
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/f2fs.h | 2 +-
fs/f2fs/namei.c | 2 ++
fs/f2fs/super.c | 5 ++---
3 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index fb216488d67a9..c9d19832426b1 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -3387,7 +3387,7 @@ static inline void f2fs_set_encrypted_inode(struct inode *inode)
{
#ifdef CONFIG_F2FS_FS_ENCRYPTION
file_set_encrypt(inode);
- inode->i_flags |= S_ENCRYPTED;
+ f2fs_set_inode_flags(inode);
#endif
}
diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c
index 1f67e389169f5..6b23dcbf52f45 100644
--- a/fs/f2fs/namei.c
+++ b/fs/f2fs/namei.c
@@ -124,6 +124,8 @@ static struct inode *f2fs_new_inode(struct inode *dir, umode_t mode)
if (F2FS_I(inode)->i_flags & F2FS_PROJINHERIT_FL)
set_inode_flag(inode, FI_PROJ_INHERIT);
+ f2fs_set_inode_flags(inode);
+
trace_f2fs_new_inode(inode, 0);
return inode;
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index d9106bbe7df63..7aefb2c35c48f 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -1835,8 +1835,7 @@ static int f2fs_quota_on(struct super_block *sb, int type, int format_id,
inode_lock(inode);
F2FS_I(inode)->i_flags |= F2FS_NOATIME_FL | F2FS_IMMUTABLE_FL;
- inode_set_flags(inode, S_NOATIME | S_IMMUTABLE,
- S_NOATIME | S_IMMUTABLE);
+ f2fs_set_inode_flags(inode);
inode_unlock(inode);
f2fs_mark_inode_dirty_sync(inode, false);
@@ -1861,7 +1860,7 @@ static int f2fs_quota_off(struct super_block *sb, int type)
inode_lock(inode);
F2FS_I(inode)->i_flags &= ~(F2FS_NOATIME_FL | F2FS_IMMUTABLE_FL);
- inode_set_flags(inode, 0, S_NOATIME | S_IMMUTABLE);
+ f2fs_set_inode_flags(inode);
inode_unlock(inode);
f2fs_mark_inode_dirty_sync(inode, false);
out_put:
--
2.20.1
From: David Hildenbrand <[email protected]>
[ Upstream commit 381eab4a6ee81266f8dddc62e57376c7e584e5b8 ]
There seem to be some problems as result of 30467e0b3be ("mm, hotplug:
fix concurrent memory hot-add deadlock"), which tried to fix a possible
lock inversion reported and discussed in [1] due to the two locks
a) device_lock()
b) mem_hotplug_lock
While add_memory() first takes b), followed by a) during
bus_probe_device(), onlining of memory from user space first took a),
followed by b), exposing a possible deadlock.
In [1], and it was decided to not make use of device_hotplug_lock, but
rather to enforce a locking order.
The problems I spotted related to this:
1. Memory block device attributes: While .state first calls
mem_hotplug_begin() and the calls device_online() - which takes
device_lock() - .online does no longer call mem_hotplug_begin(), so
effectively calls online_pages() without mem_hotplug_lock.
2. device_online() should be called under device_hotplug_lock, however
onlining memory during add_memory() does not take care of that.
In addition, I think there is also something wrong about the locking in
3. arch/powerpc/platforms/powernv/memtrace.c calls offline_pages()
without locks. This was introduced after 30467e0b3be. And skimming over
the code, I assume it could need some more care in regards to locking
(e.g. device_online() called without device_hotplug_lock. This will
be addressed in the following patches.
Now that we hold the device_hotplug_lock when
- adding memory (e.g. via add_memory()/add_memory_resource())
- removing memory (e.g. via remove_memory())
- device_online()/device_offline()
We can move mem_hotplug_lock usage back into
online_pages()/offline_pages().
Why is mem_hotplug_lock still needed? Essentially to make
get_online_mems()/put_online_mems() be very fast (relying on
device_hotplug_lock would be very slow), and to serialize against
addition of memory that does not create memory block devices (hmm).
[1] http://driverdev.linuxdriverproject.org/pipermail/ driverdev-devel/
2015-February/065324.html
This patch is partly based on a patch by Vitaly Kuznetsov.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: David Hildenbrand <[email protected]>
Reviewed-by: Pavel Tatashin <[email protected]>
Reviewed-by: Rashmica Gupta <[email protected]>
Reviewed-by: Oscar Salvador <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Len Brown <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: "K. Y. Srinivasan" <[email protected]>
Cc: Haiyang Zhang <[email protected]>
Cc: Stephen Hemminger <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Boris Ostrovsky <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Rashmica Gupta <[email protected]>
Cc: Michael Neuling <[email protected]>
Cc: Balbir Singh <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: YASUAKI ISHIMATSU <[email protected]>
Cc: Mathieu Malaterre <[email protected]>
Cc: John Allen <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Nathan Fontenot <[email protected]>
Cc: Rafael J. Wysocki <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/base/memory.c | 13 +------------
mm/memory_hotplug.c | 28 ++++++++++++++++++++--------
2 files changed, 21 insertions(+), 20 deletions(-)
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index 07901cacfec63..0f8e77f78cc80 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -228,7 +228,6 @@ static bool pages_correctly_probed(unsigned long start_pfn)
/*
* MEMORY_HOTPLUG depends on SPARSEMEM in mm/Kconfig, so it is
* OK to have direct references to sparsemem variables in here.
- * Must already be protected by mem_hotplug_begin().
*/
static int
memory_block_action(unsigned long phys_index, unsigned long action, int online_type)
@@ -294,7 +293,6 @@ static int memory_subsys_online(struct device *dev)
if (mem->online_type < 0)
mem->online_type = MMOP_ONLINE_KEEP;
- /* Already under protection of mem_hotplug_begin() */
ret = memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE);
/* clear online_type */
@@ -341,19 +339,11 @@ store_mem_state(struct device *dev,
goto err;
}
- /*
- * Memory hotplug needs to hold mem_hotplug_begin() for probe to find
- * the correct memory block to online before doing device_online(dev),
- * which will take dev->mutex. Take the lock early to prevent an
- * inversion, memory_subsys_online() callbacks will be implemented by
- * assuming it's already protected.
- */
- mem_hotplug_begin();
-
switch (online_type) {
case MMOP_ONLINE_KERNEL:
case MMOP_ONLINE_MOVABLE:
case MMOP_ONLINE_KEEP:
+ /* mem->online_type is protected by device_hotplug_lock */
mem->online_type = online_type;
ret = device_online(&mem->dev);
break;
@@ -364,7 +354,6 @@ store_mem_state(struct device *dev,
ret = -EINVAL; /* should never happen */
}
- mem_hotplug_done();
err:
unlock_device_hotplug();
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 1992b416661fe..59ae3f097e002 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -883,7 +883,6 @@ static struct zone * __meminit move_pfn_range(int online_type, int nid,
return zone;
}
-/* Must be protected by mem_hotplug_begin() or a device_lock */
int __ref online_pages(unsigned long pfn, unsigned long nr_pages, int online_type)
{
unsigned long flags;
@@ -895,6 +894,8 @@ int __ref online_pages(unsigned long pfn, unsigned long nr_pages, int online_typ
struct memory_notify arg;
struct memory_block *mem;
+ mem_hotplug_begin();
+
/*
* We can't use pfn_to_nid() because nid might be stored in struct page
* which is not yet initialized. Instead, we find nid from memory block.
@@ -960,6 +961,7 @@ int __ref online_pages(unsigned long pfn, unsigned long nr_pages, int online_typ
if (onlined_pages)
memory_notify(MEM_ONLINE, &arg);
+ mem_hotplug_done();
return 0;
failed_addition:
@@ -967,6 +969,7 @@ int __ref online_pages(unsigned long pfn, unsigned long nr_pages, int online_typ
(unsigned long long) pfn << PAGE_SHIFT,
(((unsigned long long) pfn + nr_pages) << PAGE_SHIFT) - 1);
memory_notify(MEM_CANCEL_ONLINE, &arg);
+ mem_hotplug_done();
return ret;
}
#endif /* CONFIG_MEMORY_HOTPLUG_SPARSE */
@@ -1171,20 +1174,20 @@ int __ref add_memory_resource(int nid, struct resource *res, bool online)
/* create new memmap entry */
firmware_map_add_hotplug(start, start + size, "System RAM");
+ /* device_online() will take the lock when calling online_pages() */
+ mem_hotplug_done();
+
/* online pages if requested */
if (online)
walk_memory_range(PFN_DOWN(start), PFN_UP(start + size - 1),
NULL, online_memory_block);
- goto out;
-
+ return ret;
error:
/* rollback pgdat allocation and others */
if (new_node)
rollback_node_hotadd(nid);
memblock_remove(start, size);
-
-out:
mem_hotplug_done();
return ret;
}
@@ -1651,10 +1654,16 @@ static int __ref __offline_pages(unsigned long start_pfn,
return -EINVAL;
if (!IS_ALIGNED(end_pfn, pageblock_nr_pages))
return -EINVAL;
+
+ mem_hotplug_begin();
+
/* This makes hotplug much easier...and readable.
we assume this for now. .*/
- if (!test_pages_in_a_zone(start_pfn, end_pfn, &valid_start, &valid_end))
+ if (!test_pages_in_a_zone(start_pfn, end_pfn, &valid_start,
+ &valid_end)) {
+ mem_hotplug_done();
return -EINVAL;
+ }
zone = page_zone(pfn_to_page(valid_start));
node = zone_to_nid(zone);
@@ -1663,8 +1672,10 @@ static int __ref __offline_pages(unsigned long start_pfn,
/* set above range as isolated */
ret = start_isolate_page_range(start_pfn, end_pfn,
MIGRATE_MOVABLE, true);
- if (ret)
+ if (ret) {
+ mem_hotplug_done();
return ret;
+ }
arg.start_pfn = start_pfn;
arg.nr_pages = nr_pages;
@@ -1735,6 +1746,7 @@ static int __ref __offline_pages(unsigned long start_pfn,
writeback_set_ratelimit();
memory_notify(MEM_OFFLINE, &arg);
+ mem_hotplug_done();
return 0;
failed_removal:
@@ -1744,10 +1756,10 @@ static int __ref __offline_pages(unsigned long start_pfn,
memory_notify(MEM_CANCEL_OFFLINE, &arg);
/* pushback to free area */
undo_isolate_page_range(start_pfn, end_pfn, MIGRATE_MOVABLE);
+ mem_hotplug_done();
return ret;
}
-/* Must be protected by mem_hotplug_begin() or a device_lock */
int offline_pages(unsigned long start_pfn, unsigned long nr_pages)
{
return __offline_pages(start_pfn, start_pfn + nr_pages);
--
2.20.1
From: Dan Carpenter <[email protected]>
[ Upstream commit d1d2c290b3c04b65fa6132eeebe50a070746d8f6 ]
The platform_get_resource() function doesn't return error pointers, it
returns NULL on error.
Fixes: 3d4e51844a4e ("thermal: armada: convert driver to syscon register accesses")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Miquel Raynal <[email protected]>
Signed-off-by: Eduardo Valentin <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/thermal/armada_thermal.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
index e16b3cb1808c5..1c9830b2c84da 100644
--- a/drivers/thermal/armada_thermal.c
+++ b/drivers/thermal/armada_thermal.c
@@ -526,8 +526,8 @@ static int armada_thermal_probe_legacy(struct platform_device *pdev,
/* First memory region points towards the status register */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (IS_ERR(res))
- return PTR_ERR(res);
+ if (!res)
+ return -EIO;
/*
* Edit the resource start address and length to map over all the
--
2.20.1
From: Joel Stanley <[email protected]>
[ Upstream commit 9c87156cce5a63735d1218f0096a65c50a7a32aa ]
When building with clang (8 trunk, 7.0 release) the frame size limit is
hit:
arch/powerpc/xmon/xmon.c:452:12: warning: stack frame size of 2576
bytes in function 'xmon_core' [-Wframe-larger-than=]
Some investigation by Naveen indicates this is due to clang saving the
addresses to printf format strings on the stack.
While this issue is investigated, bump up the frame size limit for xmon
when building with clang.
Link: https://github.com/ClangBuiltLinux/linux/issues/252
Signed-off-by: Joel Stanley <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/xmon/Makefile | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile
index 9d7d8e6d705c4..9ba44e190e5e4 100644
--- a/arch/powerpc/xmon/Makefile
+++ b/arch/powerpc/xmon/Makefile
@@ -13,6 +13,12 @@ UBSAN_SANITIZE := n
ORIG_CFLAGS := $(KBUILD_CFLAGS)
KBUILD_CFLAGS = $(subst $(CC_FLAGS_FTRACE),,$(ORIG_CFLAGS))
+ifdef CONFIG_CC_IS_CLANG
+# clang stores addresses on the stack causing the frame size to blow
+# out. See https://github.com/ClangBuiltLinux/linux/issues/252
+KBUILD_CFLAGS += -Wframe-larger-than=4096
+endif
+
ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC)
obj-y += xmon.o nonstdio.o spr_access.o
--
2.20.1
From: "Yan, Zheng" <[email protected]>
[ Upstream commit c58f450bd61511d897efc2ea472c69630635b557 ]
Signed-off-by: "Yan, Zheng" <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ceph/inode.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index acb70a6a82f0f..1e438e0faf77e 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -1694,7 +1694,6 @@ int ceph_readdir_prepopulate(struct ceph_mds_request *req,
if (IS_ERR(realdn)) {
err = PTR_ERR(realdn);
d_drop(dn);
- dn = NULL;
goto next_item;
}
dn = realdn;
--
2.20.1
From: Ilya Dryomov <[email protected]>
[ Upstream commit 894868330a1e038ea4a65dbb81741eef70ad71b1 ]
Because send_mds_reconnect() wants to send a message with a pagelist
and pass the ownership to the messenger, ceph_msg_data_add_pagelist()
consumes a ref which is then put in ceph_msg_data_destroy(). This
makes managing pagelists in the OSD client (where they are wrapped in
ceph_osd_data) unnecessarily hard because the handoff only happens in
ceph_osdc_start_request() instead of when the pagelist is passed to
ceph_osd_data_pagelist_init(). I counted several memory leaks on
various error paths.
Fix up ceph_msg_data_add_pagelist() and carry a pagelist ref in
ceph_osd_data.
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ceph/mds_client.c | 2 +-
net/ceph/messenger.c | 1 +
net/ceph/osd_client.c | 8 ++++++++
3 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 09db6d08614d2..94494d05a94cb 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -2184,7 +2184,6 @@ static struct ceph_msg *create_request_message(struct ceph_mds_client *mdsc,
if (req->r_pagelist) {
struct ceph_pagelist *pagelist = req->r_pagelist;
- refcount_inc(&pagelist->refcnt);
ceph_msg_data_add_pagelist(msg, pagelist);
msg->hdr.data_len = cpu_to_le32(pagelist->length);
} else {
@@ -3289,6 +3288,7 @@ static void send_mds_reconnect(struct ceph_mds_client *mdsc,
mutex_unlock(&mdsc->mutex);
up_read(&mdsc->snap_rwsem);
+ ceph_pagelist_release(pagelist);
return;
fail:
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index f7d7f32ac673c..2c8cd339d59ea 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -3323,6 +3323,7 @@ void ceph_msg_data_add_pagelist(struct ceph_msg *msg,
data = ceph_msg_data_create(CEPH_MSG_DATA_PAGELIST);
BUG_ON(!data);
+ refcount_inc(&pagelist->refcnt);
data->pagelist = pagelist;
list_add_tail(&data->links, &msg->data);
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 76c41a84550e7..c3494c1fb3a9a 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -126,6 +126,9 @@ static void ceph_osd_data_init(struct ceph_osd_data *osd_data)
osd_data->type = CEPH_OSD_DATA_TYPE_NONE;
}
+/*
+ * Consumes @pages if @own_pages is true.
+ */
static void ceph_osd_data_pages_init(struct ceph_osd_data *osd_data,
struct page **pages, u64 length, u32 alignment,
bool pages_from_pool, bool own_pages)
@@ -138,6 +141,9 @@ static void ceph_osd_data_pages_init(struct ceph_osd_data *osd_data,
osd_data->own_pages = own_pages;
}
+/*
+ * Consumes a ref on @pagelist.
+ */
static void ceph_osd_data_pagelist_init(struct ceph_osd_data *osd_data,
struct ceph_pagelist *pagelist)
{
@@ -362,6 +368,8 @@ static void ceph_osd_data_release(struct ceph_osd_data *osd_data)
num_pages = calc_pages_for((u64)osd_data->alignment,
(u64)osd_data->length);
ceph_release_page_vector(osd_data->pages, num_pages);
+ } else if (osd_data->type == CEPH_OSD_DATA_TYPE_PAGELIST) {
+ ceph_pagelist_release(osd_data->pagelist);
}
ceph_osd_data_init(osd_data);
}
--
2.20.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit ef0f02fd69a02b50e468a4ddbe33e3d81671e248 ]
Clang warns:
drivers/rtc/rtc-s35390a.c:124:27: warning: implicit conversion from
'int' to 'char' changes value from 192 to -64 [-Wconstant-conversion]
buf = S35390A_FLAG_RESET | S35390A_FLAG_24H;
~ ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~
1 warning generated.
Update buf to be an unsigned 8-bit integer, which matches the buf member
in struct i2c_msg.
https://github.com/ClangBuiltLinux/linux/issues/145
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/rtc/rtc-s35390a.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/rtc/rtc-s35390a.c b/drivers/rtc/rtc-s35390a.c
index 77feb603cd4c0..3c64dbb08109a 100644
--- a/drivers/rtc/rtc-s35390a.c
+++ b/drivers/rtc/rtc-s35390a.c
@@ -108,7 +108,7 @@ static int s35390a_get_reg(struct s35390a *s35390a, int reg, char *buf, int len)
static int s35390a_init(struct s35390a *s35390a)
{
- char buf;
+ u8 buf;
int ret;
unsigned initcount = 0;
--
2.20.1
From: Nicholas Piggin <[email protected]>
[ Upstream commit dd76ff5af35350fd6d5bb5b069e73b6017f66893 ]
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/mm/tlb-radix.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/powerpc/mm/tlb-radix.c b/arch/powerpc/mm/tlb-radix.c
index 62be0e5732b70..02bc3ae8522f4 100644
--- a/arch/powerpc/mm/tlb-radix.c
+++ b/arch/powerpc/mm/tlb-radix.c
@@ -1071,7 +1071,6 @@ void radix__flush_tlb_collapsed_pmd(struct mm_struct *mm, unsigned long addr)
goto local;
}
_tlbie_va_range(addr, end, pid, PAGE_SIZE, mmu_virtual_psize, true);
- goto local;
} else {
local:
_tlbiel_va_range(addr, end, pid, PAGE_SIZE, mmu_virtual_psize, true);
--
2.20.1
From: Masahisa Kojima <[email protected]>
[ Upstream commit 8e850f25b5812aefedec6732732eb10e7b47cb5c ]
In ndo_stop, driver resets the netsec ethernet controller IP.
When the netsec IP is reset, HW running mode turns to NRM mode
and driver has to wait until this mode transition completes.
But mode transition to NRM will not complete if the PHY is
in normal operation state. Netsec IP requires PHY is in
power down state when it is reset.
This modification stops the PHY before resetting netsec.
Together with this modification, phy_addr is stored in netsec_priv
structure because ndev->phydev is not yet ready in ndo_init.
Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Masahisa Kojima <[email protected]>
Signed-off-by: Yoshitoyo Osaki <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/socionext/netsec.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c
index d2caeb9edc044..28d582c18afb9 100644
--- a/drivers/net/ethernet/socionext/netsec.c
+++ b/drivers/net/ethernet/socionext/netsec.c
@@ -274,6 +274,7 @@ struct netsec_priv {
struct clk *clk;
u32 msg_enable;
u32 freq;
+ u32 phy_addr;
bool rx_cksum_offload_flag;
};
@@ -1346,11 +1347,11 @@ static int netsec_netdev_stop(struct net_device *ndev)
netsec_uninit_pkt_dring(priv, NETSEC_RING_TX);
netsec_uninit_pkt_dring(priv, NETSEC_RING_RX);
- ret = netsec_reset_hardware(priv, false);
-
phy_stop(ndev->phydev);
phy_disconnect(ndev->phydev);
+ ret = netsec_reset_hardware(priv, false);
+
pm_runtime_put_sync(priv->dev);
return ret;
@@ -1360,6 +1361,7 @@ static int netsec_netdev_init(struct net_device *ndev)
{
struct netsec_priv *priv = netdev_priv(ndev);
int ret;
+ u16 data;
ret = netsec_alloc_dring(priv, NETSEC_RING_TX);
if (ret)
@@ -1369,6 +1371,11 @@ static int netsec_netdev_init(struct net_device *ndev)
if (ret)
goto err1;
+ /* set phy power down */
+ data = netsec_phy_read(priv->mii_bus, priv->phy_addr, MII_BMCR) |
+ BMCR_PDOWN;
+ netsec_phy_write(priv->mii_bus, priv->phy_addr, MII_BMCR, data);
+
ret = netsec_reset_hardware(priv, true);
if (ret)
goto err2;
@@ -1418,7 +1425,7 @@ static const struct net_device_ops netsec_netdev_ops = {
};
static int netsec_of_probe(struct platform_device *pdev,
- struct netsec_priv *priv)
+ struct netsec_priv *priv, u32 *phy_addr)
{
priv->phy_np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
if (!priv->phy_np) {
@@ -1426,6 +1433,8 @@ static int netsec_of_probe(struct platform_device *pdev,
return -EINVAL;
}
+ *phy_addr = of_mdio_parse_addr(&pdev->dev, priv->phy_np);
+
priv->clk = devm_clk_get(&pdev->dev, NULL); /* get by 'phy_ref_clk' */
if (IS_ERR(priv->clk)) {
dev_err(&pdev->dev, "phy_ref_clk not found\n");
@@ -1626,12 +1635,14 @@ static int netsec_probe(struct platform_device *pdev)
}
if (dev_of_node(&pdev->dev))
- ret = netsec_of_probe(pdev, priv);
+ ret = netsec_of_probe(pdev, priv, &phy_addr);
else
ret = netsec_acpi_probe(pdev, priv, &phy_addr);
if (ret)
goto free_ndev;
+ priv->phy_addr = phy_addr;
+
if (!priv->freq) {
dev_err(&pdev->dev, "missing PHY reference clock frequency\n");
ret = -ENODEV;
--
2.20.1
From: Quentin Monnet <[email protected]>
[ Upstream commit c5fa5d602221362f8341ecd9e32d83194abf5bd9 ]
The return value for each test in test_libbpf.sh is compared with
if (( $? == 0 )) ; then ...
This works well with bash, but not with dash, that /bin/sh is aliased to
on some systems (such as Ubuntu).
Let's replace this comparison by something that works on both shells.
Signed-off-by: Quentin Monnet <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/test_libbpf.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/bpf/test_libbpf.sh b/tools/testing/selftests/bpf/test_libbpf.sh
index 8b1bc96d8e0cc..2989b2e2d856d 100755
--- a/tools/testing/selftests/bpf/test_libbpf.sh
+++ b/tools/testing/selftests/bpf/test_libbpf.sh
@@ -6,7 +6,7 @@ export TESTNAME=test_libbpf
# Determine selftest success via shell exit code
exit_handler()
{
- if (( $? == 0 )); then
+ if [ $? -eq 0 ]; then
echo "selftests: $TESTNAME [PASS]";
else
echo "$TESTNAME: failed at file $LAST_LOADED" 1>&2
--
2.20.1
From: Jianchao Wang <[email protected]>
[ Upstream commit 69840466086d2248898020a08dda52732686c4e6 ]
There are two cases when handle DISCARD merge.
If max_discard_segments == 1, the bios/requests need to be contiguous
to merge. If max_discard_segments > 1, it takes every bio as a range
and different range needn't to be contiguous.
But now, attempt_merge screws this up. It always consider contiguity
for DISCARD for the case max_discard_segments > 1 and cannot merge
contiguous DISCARD for the case max_discard_segments == 1, because
rq_attempt_discard_merge always returns false in this case.
This patch fixes both of the two cases above.
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Signed-off-by: Jianchao Wang <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-merge.c | 46 ++++++++++++++++++++++++++++++++++++----------
1 file changed, 36 insertions(+), 10 deletions(-)
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 2e042190a4f1c..1dced51de1c6c 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -669,6 +669,31 @@ static void blk_account_io_merge(struct request *req)
part_stat_unlock();
}
}
+/*
+ * Two cases of handling DISCARD merge:
+ * If max_discard_segments > 1, the driver takes every bio
+ * as a range and send them to controller together. The ranges
+ * needn't to be contiguous.
+ * Otherwise, the bios/requests will be handled as same as
+ * others which should be contiguous.
+ */
+static inline bool blk_discard_mergable(struct request *req)
+{
+ if (req_op(req) == REQ_OP_DISCARD &&
+ queue_max_discard_segments(req->q) > 1)
+ return true;
+ return false;
+}
+
+enum elv_merge blk_try_req_merge(struct request *req, struct request *next)
+{
+ if (blk_discard_mergable(req))
+ return ELEVATOR_DISCARD_MERGE;
+ else if (blk_rq_pos(req) + blk_rq_sectors(req) == blk_rq_pos(next))
+ return ELEVATOR_BACK_MERGE;
+
+ return ELEVATOR_NO_MERGE;
+}
/*
* For non-mq, this has to be called with the request spinlock acquired.
@@ -686,12 +711,6 @@ static struct request *attempt_merge(struct request_queue *q,
if (req_op(req) != req_op(next))
return NULL;
- /*
- * not contiguous
- */
- if (blk_rq_pos(req) + blk_rq_sectors(req) != blk_rq_pos(next))
- return NULL;
-
if (rq_data_dir(req) != rq_data_dir(next)
|| req->rq_disk != next->rq_disk
|| req_no_special_merge(next))
@@ -715,11 +734,19 @@ static struct request *attempt_merge(struct request_queue *q,
* counts here. Handle DISCARDs separately, as they
* have separate settings.
*/
- if (req_op(req) == REQ_OP_DISCARD) {
+
+ switch (blk_try_req_merge(req, next)) {
+ case ELEVATOR_DISCARD_MERGE:
if (!req_attempt_discard_merge(q, req, next))
return NULL;
- } else if (!ll_merge_requests_fn(q, req, next))
+ break;
+ case ELEVATOR_BACK_MERGE:
+ if (!ll_merge_requests_fn(q, req, next))
+ return NULL;
+ break;
+ default:
return NULL;
+ }
/*
* If failfast settings disagree or any of the two is already
@@ -843,8 +870,7 @@ bool blk_rq_merge_ok(struct request *rq, struct bio *bio)
enum elv_merge blk_try_merge(struct request *rq, struct bio *bio)
{
- if (req_op(rq) == REQ_OP_DISCARD &&
- queue_max_discard_segments(rq->q) > 1)
+ if (blk_discard_mergable(rq))
return ELEVATOR_DISCARD_MERGE;
else if (blk_rq_pos(rq) + blk_rq_sectors(rq) == bio->bi_iter.bi_sector)
return ELEVATOR_BACK_MERGE;
--
2.20.1
On Sat, Nov 16, 2019 at 4:43 PM Sasha Levin <[email protected]> wrote:
>
> From: Ilya Dryomov <[email protected]>
>
> [ Upstream commit 894868330a1e038ea4a65dbb81741eef70ad71b1 ]
>
> Because send_mds_reconnect() wants to send a message with a pagelist
> and pass the ownership to the messenger, ceph_msg_data_add_pagelist()
> consumes a ref which is then put in ceph_msg_data_destroy(). This
> makes managing pagelists in the OSD client (where they are wrapped in
> ceph_osd_data) unnecessarily hard because the handoff only happens in
> ceph_osdc_start_request() instead of when the pagelist is passed to
> ceph_osd_data_pagelist_init(). I counted several memory leaks on
> various error paths.
>
> Fix up ceph_msg_data_add_pagelist() and carry a pagelist ref in
> ceph_osd_data.
>
> Signed-off-by: Ilya Dryomov <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> fs/ceph/mds_client.c | 2 +-
> net/ceph/messenger.c | 1 +
> net/ceph/osd_client.c | 8 ++++++++
> 3 files changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
> index 09db6d08614d2..94494d05a94cb 100644
> --- a/fs/ceph/mds_client.c
> +++ b/fs/ceph/mds_client.c
> @@ -2184,7 +2184,6 @@ static struct ceph_msg *create_request_message(struct ceph_mds_client *mdsc,
>
> if (req->r_pagelist) {
> struct ceph_pagelist *pagelist = req->r_pagelist;
> - refcount_inc(&pagelist->refcnt);
> ceph_msg_data_add_pagelist(msg, pagelist);
> msg->hdr.data_len = cpu_to_le32(pagelist->length);
> } else {
> @@ -3289,6 +3288,7 @@ static void send_mds_reconnect(struct ceph_mds_client *mdsc,
> mutex_unlock(&mdsc->mutex);
>
> up_read(&mdsc->snap_rwsem);
> + ceph_pagelist_release(pagelist);
> return;
>
> fail:
> diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
> index f7d7f32ac673c..2c8cd339d59ea 100644
> --- a/net/ceph/messenger.c
> +++ b/net/ceph/messenger.c
> @@ -3323,6 +3323,7 @@ void ceph_msg_data_add_pagelist(struct ceph_msg *msg,
>
> data = ceph_msg_data_create(CEPH_MSG_DATA_PAGELIST);
> BUG_ON(!data);
> + refcount_inc(&pagelist->refcnt);
> data->pagelist = pagelist;
>
> list_add_tail(&data->links, &msg->data);
> diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
> index 76c41a84550e7..c3494c1fb3a9a 100644
> --- a/net/ceph/osd_client.c
> +++ b/net/ceph/osd_client.c
> @@ -126,6 +126,9 @@ static void ceph_osd_data_init(struct ceph_osd_data *osd_data)
> osd_data->type = CEPH_OSD_DATA_TYPE_NONE;
> }
>
> +/*
> + * Consumes @pages if @own_pages is true.
> + */
> static void ceph_osd_data_pages_init(struct ceph_osd_data *osd_data,
> struct page **pages, u64 length, u32 alignment,
> bool pages_from_pool, bool own_pages)
> @@ -138,6 +141,9 @@ static void ceph_osd_data_pages_init(struct ceph_osd_data *osd_data,
> osd_data->own_pages = own_pages;
> }
>
> +/*
> + * Consumes a ref on @pagelist.
> + */
> static void ceph_osd_data_pagelist_init(struct ceph_osd_data *osd_data,
> struct ceph_pagelist *pagelist)
> {
> @@ -362,6 +368,8 @@ static void ceph_osd_data_release(struct ceph_osd_data *osd_data)
> num_pages = calc_pages_for((u64)osd_data->alignment,
> (u64)osd_data->length);
> ceph_release_page_vector(osd_data->pages, num_pages);
> + } else if (osd_data->type == CEPH_OSD_DATA_TYPE_PAGELIST) {
> + ceph_pagelist_release(osd_data->pagelist);
> }
> ceph_osd_data_init(osd_data);
> }
Hi Sasha,
This commit was part of a larger series and shouldn't be backported on
its own. Please drop it.
Thanks,
Ilya
From: Sergei Shtylyov <[email protected]>
[ Upstream commit df016bbba63743bbef9ff5c6c282561211dd72cc ]
The driver on R8A77995 requests the same IRQ twice since
platform_get_resource() is always called for the 1st IRQ resource.
Fixes: 1969d9dc2079 ("thermal: rcar_thermal: add r8a77995 support")
Signed-off-by: Sergei Shtylyov <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Signed-off-by: Eduardo Valentin <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/thermal/rcar_thermal.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 8df2ce94c28d8..edaa4058686b7 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -493,7 +493,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
pm_runtime_get_sync(dev);
for (i = 0; i < chip->nirqs; i++) {
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, i);
if (!irq)
continue;
if (!common->base) {
--
2.20.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit 64b9d16e2d02ca6e5dc8fcd30cfd52b0ecaaa8f4 ]
Clang warns:
drivers/atm/zatm.c:513:7: error: while loop has empty body
[-Werror,-Wempty-body]
zwait;
^
drivers/atm/zatm.c:513:7: note: put the semicolon on a separate line to
silence this warning
Get rid of this warning by using an empty do-while loop. While we're at
it, add parentheses to make it clear that this is a function-like macro.
Link: https://github.com/ClangBuiltLinux/linux/issues/42
Suggested-by: Masahiro Yamada <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/atm/zatm.c | 42 +++++++++++++++++++++---------------------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c
index e89146ddede69..d5c76b50d3575 100644
--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -126,7 +126,7 @@ static unsigned long dummy[2] = {0,0};
#define zin_n(r) inl(zatm_dev->base+r*4)
#define zin(r) inl(zatm_dev->base+uPD98401_##r*4)
#define zout(v,r) outl(v,zatm_dev->base+uPD98401_##r*4)
-#define zwait while (zin(CMR) & uPD98401_BUSY)
+#define zwait() do {} while (zin(CMR) & uPD98401_BUSY)
/* RX0, RX1, TX0, TX1 */
static const int mbx_entries[NR_MBX] = { 1024,1024,1024,1024 };
@@ -140,7 +140,7 @@ static const int mbx_esize[NR_MBX] = { 16,16,4,4 }; /* entry size in bytes */
static void zpokel(struct zatm_dev *zatm_dev,u32 value,u32 addr)
{
- zwait;
+ zwait();
zout(value,CER);
zout(uPD98401_IND_ACC | uPD98401_IA_BALL |
(uPD98401_IA_TGT_CM << uPD98401_IA_TGT_SHIFT) | addr,CMR);
@@ -149,10 +149,10 @@ static void zpokel(struct zatm_dev *zatm_dev,u32 value,u32 addr)
static u32 zpeekl(struct zatm_dev *zatm_dev,u32 addr)
{
- zwait;
+ zwait();
zout(uPD98401_IND_ACC | uPD98401_IA_BALL | uPD98401_IA_RW |
(uPD98401_IA_TGT_CM << uPD98401_IA_TGT_SHIFT) | addr,CMR);
- zwait;
+ zwait();
return zin(CER);
}
@@ -241,7 +241,7 @@ static void refill_pool(struct atm_dev *dev,int pool)
}
if (first) {
spin_lock_irqsave(&zatm_dev->lock, flags);
- zwait;
+ zwait();
zout(virt_to_bus(first),CER);
zout(uPD98401_ADD_BAT | (pool << uPD98401_POOL_SHIFT) | count,
CMR);
@@ -508,9 +508,9 @@ static int open_rx_first(struct atm_vcc *vcc)
}
if (zatm_vcc->pool < 0) return -EMSGSIZE;
spin_lock_irqsave(&zatm_dev->lock, flags);
- zwait;
+ zwait();
zout(uPD98401_OPEN_CHAN,CMR);
- zwait;
+ zwait();
DPRINTK("0x%x 0x%x\n",zin(CMR),zin(CER));
chan = (zin(CMR) & uPD98401_CHAN_ADDR) >> uPD98401_CHAN_ADDR_SHIFT;
spin_unlock_irqrestore(&zatm_dev->lock, flags);
@@ -571,21 +571,21 @@ static void close_rx(struct atm_vcc *vcc)
pos = vcc->vci >> 1;
shift = (1-(vcc->vci & 1)) << 4;
zpokel(zatm_dev,zpeekl(zatm_dev,pos) & ~(0xffff << shift),pos);
- zwait;
+ zwait();
zout(uPD98401_NOP,CMR);
- zwait;
+ zwait();
zout(uPD98401_NOP,CMR);
spin_unlock_irqrestore(&zatm_dev->lock, flags);
}
spin_lock_irqsave(&zatm_dev->lock, flags);
- zwait;
+ zwait();
zout(uPD98401_DEACT_CHAN | uPD98401_CHAN_RT | (zatm_vcc->rx_chan <<
uPD98401_CHAN_ADDR_SHIFT),CMR);
- zwait;
+ zwait();
udelay(10); /* why oh why ... ? */
zout(uPD98401_CLOSE_CHAN | uPD98401_CHAN_RT | (zatm_vcc->rx_chan <<
uPD98401_CHAN_ADDR_SHIFT),CMR);
- zwait;
+ zwait();
if (!(zin(CMR) & uPD98401_CHAN_ADDR))
printk(KERN_CRIT DEV_LABEL "(itf %d): can't close RX channel "
"%d\n",vcc->dev->number,zatm_vcc->rx_chan);
@@ -699,7 +699,7 @@ printk("NONONONOO!!!!\n");
skb_queue_tail(&zatm_vcc->tx_queue,skb);
DPRINTK("QRP=0x%08lx\n",zpeekl(zatm_dev,zatm_vcc->tx_chan*VC_SIZE/4+
uPD98401_TXVC_QRP));
- zwait;
+ zwait();
zout(uPD98401_TX_READY | (zatm_vcc->tx_chan <<
uPD98401_CHAN_ADDR_SHIFT),CMR);
spin_unlock_irqrestore(&zatm_dev->lock, flags);
@@ -891,12 +891,12 @@ static void close_tx(struct atm_vcc *vcc)
}
spin_lock_irqsave(&zatm_dev->lock, flags);
#if 0
- zwait;
+ zwait();
zout(uPD98401_DEACT_CHAN | (chan << uPD98401_CHAN_ADDR_SHIFT),CMR);
#endif
- zwait;
+ zwait();
zout(uPD98401_CLOSE_CHAN | (chan << uPD98401_CHAN_ADDR_SHIFT),CMR);
- zwait;
+ zwait();
if (!(zin(CMR) & uPD98401_CHAN_ADDR))
printk(KERN_CRIT DEV_LABEL "(itf %d): can't close TX channel "
"%d\n",vcc->dev->number,chan);
@@ -926,9 +926,9 @@ static int open_tx_first(struct atm_vcc *vcc)
zatm_vcc->tx_chan = 0;
if (vcc->qos.txtp.traffic_class == ATM_NONE) return 0;
spin_lock_irqsave(&zatm_dev->lock, flags);
- zwait;
+ zwait();
zout(uPD98401_OPEN_CHAN,CMR);
- zwait;
+ zwait();
DPRINTK("0x%x 0x%x\n",zin(CMR),zin(CER));
chan = (zin(CMR) & uPD98401_CHAN_ADDR) >> uPD98401_CHAN_ADDR_SHIFT;
spin_unlock_irqrestore(&zatm_dev->lock, flags);
@@ -1557,7 +1557,7 @@ static void zatm_phy_put(struct atm_dev *dev,unsigned char value,
struct zatm_dev *zatm_dev;
zatm_dev = ZATM_DEV(dev);
- zwait;
+ zwait();
zout(value,CER);
zout(uPD98401_IND_ACC | uPD98401_IA_B0 |
(uPD98401_IA_TGT_PHY << uPD98401_IA_TGT_SHIFT) | addr,CMR);
@@ -1569,10 +1569,10 @@ static unsigned char zatm_phy_get(struct atm_dev *dev,unsigned long addr)
struct zatm_dev *zatm_dev;
zatm_dev = ZATM_DEV(dev);
- zwait;
+ zwait();
zout(uPD98401_IND_ACC | uPD98401_IA_B0 | uPD98401_IA_RW |
(uPD98401_IA_TGT_PHY << uPD98401_IA_TGT_SHIFT) | addr,CMR);
- zwait;
+ zwait();
return zin(CER) & 0xff;
}
--
2.20.1
From: Xin Long <[email protected]>
[ Upstream commit cd305c74b0f8b49748a79a8f67fc8e5e3e0c4794 ]
sk->sk_wmem_queued is used to count the size of chunks in out queue
while sk->sk_wmem_alloc is for counting the size of chunks has been
sent. sctp is increasing both of them before enqueuing the chunks,
and using sk->sk_wmem_alloc to check for writable space.
However, sk_wmem_alloc is also increased by 1 for the skb allocked
for sending in sctp_packet_transmit() but it will not wake up the
waiters when sk_wmem_alloc is decreased in this skb's destructor.
If msg size is equal to sk_sndbuf and sendmsg is waiting for sndbuf,
the check 'msg_len <= sctp_wspace(asoc)' in sctp_wait_for_sndbuf()
will keep waiting if there's a skb allocked in sctp_packet_transmit,
and later even if this skb got freed, the waiting thread will never
get waked up.
This issue has been there since very beginning, so we change to use
sk->sk_wmem_queued to check for writable space as sk_wmem_queued is
not increased for the skb allocked for sending, also as TCP does.
SOCK_SNDBUF_LOCK check is also removed here as it's for tx buf auto
tuning which I will add in another patch.
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sctp/socket.c | 38 +++++++++-----------------------------
1 file changed, 9 insertions(+), 29 deletions(-)
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index c766315527226..e7a11cd7633f5 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -83,7 +83,7 @@
#include <net/sctp/stream_sched.h>
/* Forward declarations for internal helper functions. */
-static int sctp_writeable(struct sock *sk);
+static bool sctp_writeable(struct sock *sk);
static void sctp_wfree(struct sk_buff *skb);
static int sctp_wait_for_sndbuf(struct sctp_association *asoc, long *timeo_p,
size_t msg_len);
@@ -119,25 +119,10 @@ static void sctp_enter_memory_pressure(struct sock *sk)
/* Get the sndbuf space available at the time on the association. */
static inline int sctp_wspace(struct sctp_association *asoc)
{
- int amt;
+ struct sock *sk = asoc->base.sk;
- if (asoc->ep->sndbuf_policy)
- amt = asoc->sndbuf_used;
- else
- amt = sk_wmem_alloc_get(asoc->base.sk);
-
- if (amt >= asoc->base.sk->sk_sndbuf) {
- if (asoc->base.sk->sk_userlocks & SOCK_SNDBUF_LOCK)
- amt = 0;
- else {
- amt = sk_stream_wspace(asoc->base.sk);
- if (amt < 0)
- amt = 0;
- }
- } else {
- amt = asoc->base.sk->sk_sndbuf - amt;
- }
- return amt;
+ return asoc->ep->sndbuf_policy ? sk->sk_sndbuf - asoc->sndbuf_used
+ : sk_stream_wspace(sk);
}
/* Increment the used sndbuf space count of the corresponding association by
@@ -1928,10 +1913,10 @@ static int sctp_sendmsg_to_asoc(struct sctp_association *asoc,
asoc->pmtu_pending = 0;
}
- if (sctp_wspace(asoc) < msg_len)
+ if (sctp_wspace(asoc) < (int)msg_len)
sctp_prsctp_prune(asoc, sinfo, msg_len - sctp_wspace(asoc));
- if (!sctp_wspace(asoc)) {
+ if (sctp_wspace(asoc) <= 0) {
timeo = sock_sndtimeo(sk, msg->msg_flags & MSG_DONTWAIT);
err = sctp_wait_for_sndbuf(asoc, &timeo, msg_len);
if (err)
@@ -8516,7 +8501,7 @@ static int sctp_wait_for_sndbuf(struct sctp_association *asoc, long *timeo_p,
goto do_error;
if (signal_pending(current))
goto do_interrupted;
- if (msg_len <= sctp_wspace(asoc))
+ if ((int)msg_len <= sctp_wspace(asoc))
break;
/* Let another process have a go. Since we are going
@@ -8591,14 +8576,9 @@ void sctp_write_space(struct sock *sk)
* UDP-style sockets or TCP-style sockets, this code should work.
* - Daisy
*/
-static int sctp_writeable(struct sock *sk)
+static bool sctp_writeable(struct sock *sk)
{
- int amt = 0;
-
- amt = sk->sk_sndbuf - sk_wmem_alloc_get(sk);
- if (amt < 0)
- amt = 0;
- return amt;
+ return sk->sk_sndbuf > sk->sk_wmem_queued;
}
/* Wait for an association to go into ESTABLISHED state. If timeout is 0,
--
2.20.1
From: Mattias Jacobsson <[email protected]>
[ Upstream commit 090158555ff8d194a98616034100b16697dd80d0 ]
Upon success the update_status handler returns a positive number
corresponding to the number of bytes transferred by usb_control_msg.
However the return code of the update_status handler should indicate if
an error occurred(negative) or how many bytes of the user's input to sysfs
that was consumed. Return code zero indicates all bytes were consumed.
The bug can for example result in the update_status handler being called
twice, the second time with only the "unconsumed" part of the user's input
to sysfs. Effectively setting an incorrect brightness.
Change the update_status handler to return zero for all successful
transactions and forward usb_control_msg's error code upon failure.
Signed-off-by: Mattias Jacobsson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/misc/appledisplay.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
index 1c6da8d6cccf8..39ca31b4de466 100644
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -148,8 +148,11 @@ static int appledisplay_bl_update_status(struct backlight_device *bd)
pdata->msgdata, 2,
ACD_USB_TIMEOUT);
mutex_unlock(&pdata->sysfslock);
-
- return retval;
+
+ if (retval < 0)
+ return retval;
+ else
+ return 0;
}
static int appledisplay_bl_get_brightness(struct backlight_device *bd)
--
2.20.1
From: Garry McNulty <[email protected]>
[ Upstream commit ef2298a06d012973bbc592b86fe5ff730d4d0c63 ]
In some error conditions, resp_buftype can be passed uninitialised to
free_rsp_buf(), potentially resulting in a spurious debug message.
If resp_buftype randomly had the value 1 (CIFS_SMALL_BUFFER) then this
would log a debug message.
The rsp pointer is initialised to NULL so there is no other side-effect.
Detected by CoverityScan, CID 1438585 ("Uninitialized scalar variable")
Detected by CoverityScan, CID 1438667 ("Uninitialized scalar variable")
Detected by CoverityScan, CID 1438764 ("Uninitialized scalar variable")
Signed-off-by: Garry McNulty <[email protected]>
Signed-off-by: Steve French <[email protected]>
Reviewed-by: Aurelien Aptel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/cifs/smb2pdu.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
index b1f5d0d28335a..9194f17675c89 100644
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -2283,7 +2283,7 @@ SMB2_open(const unsigned int xid, struct cifs_open_parms *oparms, __le16 *path,
struct cifs_ses *ses = tcon->ses;
struct kvec iov[SMB2_CREATE_IOV_SIZE];
struct kvec rsp_iov = {NULL, 0};
- int resp_buftype;
+ int resp_buftype = CIFS_NO_BUFFER;
int rc = 0;
int flags = 0;
@@ -2570,7 +2570,7 @@ SMB2_close_flags(const unsigned int xid, struct cifs_tcon *tcon,
struct cifs_ses *ses = tcon->ses;
struct kvec iov[1];
struct kvec rsp_iov;
- int resp_buftype;
+ int resp_buftype = CIFS_NO_BUFFER;
int rc = 0;
cifs_dbg(FYI, "Close\n");
@@ -2723,7 +2723,7 @@ query_info(const unsigned int xid, struct cifs_tcon *tcon,
struct kvec iov[1];
struct kvec rsp_iov;
int rc = 0;
- int resp_buftype;
+ int resp_buftype = CIFS_NO_BUFFER;
struct cifs_ses *ses = tcon->ses;
int flags = 0;
--
2.20.1
From: Sapthagiri Baratam <[email protected]>
[ Upstream commit 6b269a41a4520f7eb639e61a45ebbb9c9267d5e0 ]
Don't call runtime_put_sync when clk32k_ref is ARIZONA_32KZ_MCLK2
as there is no corresponding runtime_get_sync call.
MCLK1 is not in the AoD power domain so if it is used as 32kHz clock
source we need to hold a runtime PM reference to keep the device from
going into low power mode.
Fixes: cdd8da8cc66b ("mfd: arizona: Add gating of external MCLKn clocks")
Signed-off-by: Sapthagiri Baratam <[email protected]>
Acked-by: Charles Keepax <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/arizona-core.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 47d6d40f41cd5..a4403a57ddc89 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -52,8 +52,10 @@ int arizona_clk32k_enable(struct arizona *arizona)
if (ret != 0)
goto err_ref;
ret = clk_prepare_enable(arizona->mclk[ARIZONA_MCLK1]);
- if (ret != 0)
- goto err_pm;
+ if (ret != 0) {
+ pm_runtime_put_sync(arizona->dev);
+ goto err_ref;
+ }
break;
case ARIZONA_32KZ_MCLK2:
ret = clk_prepare_enable(arizona->mclk[ARIZONA_MCLK2]);
@@ -67,8 +69,6 @@ int arizona_clk32k_enable(struct arizona *arizona)
ARIZONA_CLK_32K_ENA);
}
-err_pm:
- pm_runtime_put_sync(arizona->dev);
err_ref:
if (ret != 0)
arizona->clk32k_ref--;
--
2.20.1
From: Benjamin Herrenschmidt <[email protected]>
[ Upstream commit fc0c8b36d379a046525eacb9c3323ca635283757 ]
There's some antiquated debug output that's trying
to do a hand-made hexdump and turning into horrible
1-byte-per-line output these days.
Use print_hex_dump() instead
Signed-off-by: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/macintosh/windfarm_smu_sat.c | 25 +++++++------------------
1 file changed, 7 insertions(+), 18 deletions(-)
diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c
index da7f4fc1a51d1..a0f61eb853c55 100644
--- a/drivers/macintosh/windfarm_smu_sat.c
+++ b/drivers/macintosh/windfarm_smu_sat.c
@@ -22,14 +22,6 @@
#define VERSION "1.0"
-#define DEBUG
-
-#ifdef DEBUG
-#define DBG(args...) printk(args)
-#else
-#define DBG(args...) do { } while(0)
-#endif
-
/* If the cache is older than 800ms we'll refetch it */
#define MAX_AGE msecs_to_jiffies(800)
@@ -106,13 +98,10 @@ struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id,
buf[i+2] = data[3];
buf[i+3] = data[2];
}
-#ifdef DEBUG
- DBG(KERN_DEBUG "sat %d partition %x:", sat_id, id);
- for (i = 0; i < len; ++i)
- DBG(" %x", buf[i]);
- DBG("\n");
-#endif
+ printk(KERN_DEBUG "sat %d partition %x:", sat_id, id);
+ print_hex_dump(KERN_DEBUG, " ", DUMP_PREFIX_OFFSET,
+ 16, 1, buf, len, false);
if (size)
*size = len;
return (struct smu_sdbp_header *) buf;
@@ -132,13 +121,13 @@ static int wf_sat_read_cache(struct wf_sat *sat)
if (err < 0)
return err;
sat->last_read = jiffies;
+
#ifdef LOTSA_DEBUG
{
int i;
- DBG(KERN_DEBUG "wf_sat_get: data is");
- for (i = 0; i < 16; ++i)
- DBG(" %.2x", sat->cache[i]);
- DBG("\n");
+ printk(KERN_DEBUG "wf_sat_get: data is");
+ print_hex_dump(KERN_DEBUG, " ", DUMP_PREFIX_OFFSET,
+ 16, 1, sat->cache, 16, false);
}
#endif
return 0;
--
2.20.1
From: Ivan Khoronzhuk <[email protected]>
[ Upstream commit 9737cc99dd14b5b8b9d267618a6061feade8ea68 ]
After flushing all mcast entries from the table, the ones contained in
mc list of ndev are not restored when promisc mode is toggled off,
because they are considered as synched with ALE, thus, in order to
restore them after promisc mode - reset syncing info. This fix
touches only switch mode devices, including single port boards
like Beagle Bone.
Fixes: commit 5da1948969bc
("net: ethernet: ti: cpsw: fix lost of mcast packets while rx_mode update")
Signed-off-by: Ivan Khoronzhuk <[email protected]>
Reviewed-by: Grygorii Strashko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ti/cpsw.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index ef79d2b6070b9..8f93ef74fa407 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -642,6 +642,7 @@ static void cpsw_set_promiscious(struct net_device *ndev, bool enable)
/* Clear all mcast from ALE */
cpsw_ale_flush_multicast(ale, ALE_ALL_PORTS, -1);
+ __dev_mc_unsync(ndev, NULL);
/* Flood All Unicast Packets to Host port */
cpsw_ale_control_set(ale, 0, ALE_P0_UNI_FLOOD, 1);
--
2.20.1
From: Dan Carpenter <[email protected]>
[ Upstream commit c94f026fb742b2d3199422751dbc4f6fc0e753d8 ]
These functions are supposed to return one on failure and zero on
success. Returning a zero here could cause uninitialized variable
bugs in several of the callers. For example:
drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:1660 get_iscsi_dcb_priority()
error: uninitialized symbol 'caps'.
Fixes: 48365e485275 ("qlcnic: dcb: Add support for CEE Netlink interface.")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c
index 4b76c69fe86d2..834208e55f7b8 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c
@@ -883,7 +883,7 @@ static u8 qlcnic_dcb_get_capability(struct net_device *netdev, int capid,
struct qlcnic_adapter *adapter = netdev_priv(netdev);
if (!test_bit(QLCNIC_DCB_STATE, &adapter->dcb->state))
- return 0;
+ return 1;
switch (capid) {
case DCB_CAP_ATTR_PG:
--
2.20.1
From: Heinz Mauelshagen <[email protected]>
[ Upstream commit d857ad75edf3c0066fcd920746f9dc75382b3324 ]
With raid4/5/6, journal device and write intent bitmap are mutually exclusive.
Signed-off-by: Heinz Mauelshagen <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/dm-raid.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index b78a8a4d061ca..6c9b542882613 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -2475,7 +2475,7 @@ static int super_validate(struct raid_set *rs, struct md_rdev *rdev)
}
/* Enable bitmap creation for RAID levels != 0 */
- mddev->bitmap_info.offset = rt_is_raid0(rs->raid_type) ? 0 : to_sector(4096);
+ mddev->bitmap_info.offset = (rt_is_raid0(rs->raid_type) || rs->journal_dev.dev) ? 0 : to_sector(4096);
mddev->bitmap_info.default_offset = mddev->bitmap_info.offset;
if (!test_and_clear_bit(FirstUse, &rdev->flags)) {
--
2.20.1
From: Peng Hao <[email protected]>
[ Upstream commit 1bd70d2eba9d90eb787634361f0f6fa2c86b3f6d ]
FILE pointer variable f is opened but never closed.
Signed-off-by: Peng Hao <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/trace_helpers.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/testing/selftests/bpf/trace_helpers.c b/tools/testing/selftests/bpf/trace_helpers.c
index cf156b3536798..82922f13dcd3a 100644
--- a/tools/testing/selftests/bpf/trace_helpers.c
+++ b/tools/testing/selftests/bpf/trace_helpers.c
@@ -41,6 +41,7 @@ int load_kallsyms(void)
syms[i].name = strdup(func);
i++;
}
+ fclose(f);
sym_cnt = i;
qsort(syms, sym_cnt, sizeof(struct ksym), ksym_cmp);
return 0;
--
2.20.1
From: Hans de Goede <[email protected]>
[ Upstream commit 589edb56b424876cbbf61547b987a1f57d7ea99d ]
Bay and Cherry Trail devices with a Dollar Cove or Whiskey Cove PMIC
have an ACPI node with a HID of INT33FE which is a "virtual" battery
device implementing a standard ACPI battery interface which depends upon
a proprietary, undocument OpRegion called BMOP. Since we do have docs
for the actual fuel-gauges used on these boards we instead use native
fuel-gauge drivers talking directly to the fuel-gauge ICs on boards which
rely on this INT33FE device for their battery monitoring.
On boards with a Dollar Cove PMIC the INT33FE device's resources (_CRS)
describe a non-existing I2C client at address 0x6b with a bus-speed of
100KHz. This is a problem on some boards since there are actual devices
on that same bus which need a speed of 400KHz to function properly.
This commit adds the INT33FE HID to the list of devices with I2C resources
which should be enumerated as a platform-device rather then letting the
i2c-core instantiate an i2c-client matching the first I2C resource,
so that its bus-speed will not influence the max speed of the I2C bus.
This fixes e.g. the touchscreen not working on the Teclast X98 II Plus.
The INT33FE device on boards with a Whiskey Cove PMIC is somewhat special.
Its first I2C resource is for a secondary I2C address of the PMIC itself,
which is already described in an ACPI device with an INT34D3 HID.
But it has 3 more I2C resources describing 3 other chips for which we do
need to instantiate I2C clients and which need device-connections added
between them for things to work properly. This special case is handled by
the drivers/platform/x86/intel_cht_int33fe.c code.
Before this commit that code was binding to the i2c-client instantiated
for the secondary I2C address of the PMIC, since we now instantiate a
platform device for the INT33FE device instead, this commit also changes
the intel_cht_int33fe driver from an i2c driver to a platform driver.
This also brings the intel_cht_int33fe drv inline with how we instantiate
multiple i2c clients from a single ACPI device in other cases, as done
by the drivers/platform/x86/i2c-multi-instantiate.c code.
Reported-and-tested-by: Alexander Meiler <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Andy Shevchenko <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/scan.c | 1 +
drivers/platform/x86/intel_cht_int33fe.c | 24 +++++++++---------------
2 files changed, 10 insertions(+), 15 deletions(-)
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index e1b6231cfa1c5..1dcc48b9d33c9 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1550,6 +1550,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
*/
static const struct acpi_device_id i2c_multi_instantiate_ids[] = {
{"BSG1160", },
+ {"INT33FE", },
{}
};
diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c
index a26f410800c21..f40b1c1921064 100644
--- a/drivers/platform/x86/intel_cht_int33fe.c
+++ b/drivers/platform/x86/intel_cht_int33fe.c
@@ -24,6 +24,7 @@
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
@@ -88,9 +89,9 @@ static const struct property_entry fusb302_props[] = {
{ }
};
-static int cht_int33fe_probe(struct i2c_client *client)
+static int cht_int33fe_probe(struct platform_device *pdev)
{
- struct device *dev = &client->dev;
+ struct device *dev = &pdev->dev;
struct i2c_board_info board_info;
struct cht_int33fe_data *data;
struct i2c_client *max17047;
@@ -207,7 +208,7 @@ static int cht_int33fe_probe(struct i2c_client *client)
if (!data->pi3usb30532)
goto out_unregister_fusb302;
- i2c_set_clientdata(client, data);
+ platform_set_drvdata(pdev, data);
return 0;
@@ -223,9 +224,9 @@ static int cht_int33fe_probe(struct i2c_client *client)
return -EPROBE_DEFER; /* Wait for the i2c-adapter to load */
}
-static int cht_int33fe_remove(struct i2c_client *i2c)
+static int cht_int33fe_remove(struct platform_device *pdev)
{
- struct cht_int33fe_data *data = i2c_get_clientdata(i2c);
+ struct cht_int33fe_data *data = platform_get_drvdata(pdev);
i2c_unregister_device(data->pi3usb30532);
i2c_unregister_device(data->fusb302);
@@ -237,29 +238,22 @@ static int cht_int33fe_remove(struct i2c_client *i2c)
return 0;
}
-static const struct i2c_device_id cht_int33fe_i2c_id[] = {
- { }
-};
-MODULE_DEVICE_TABLE(i2c, cht_int33fe_i2c_id);
-
static const struct acpi_device_id cht_int33fe_acpi_ids[] = {
{ "INT33FE", },
{ }
};
MODULE_DEVICE_TABLE(acpi, cht_int33fe_acpi_ids);
-static struct i2c_driver cht_int33fe_driver = {
+static struct platform_driver cht_int33fe_driver = {
.driver = {
.name = "Intel Cherry Trail ACPI INT33FE driver",
.acpi_match_table = ACPI_PTR(cht_int33fe_acpi_ids),
},
- .probe_new = cht_int33fe_probe,
+ .probe = cht_int33fe_probe,
.remove = cht_int33fe_remove,
- .id_table = cht_int33fe_i2c_id,
- .disable_i2c_core_irq_mapping = true,
};
-module_i2c_driver(cht_int33fe_driver);
+module_platform_driver(cht_int33fe_driver);
MODULE_DESCRIPTION("Intel Cherry Trail ACPI INT33FE pseudo device driver");
MODULE_AUTHOR("Hans de Goede <[email protected]>");
--
2.20.1
From: Quentin Monnet <[email protected]>
[ Upstream commit fe8ecccc10b3adc071de05ca7af728ca1a4ac9aa ]
When trying to complete "bpftool map update" commands, the call to
printf would print an error message that would show on the command line
if no map is found to complete the command line.
Fix it by making sure we have map ids to complete the line with, before
we try to print something.
Signed-off-by: Quentin Monnet <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/bpf/bpftool/bash-completion/bpftool | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/bpf/bpftool/bash-completion/bpftool b/tools/bpf/bpftool/bash-completion/bpftool
index 598066c401912..c2b6b2176f3b7 100644
--- a/tools/bpf/bpftool/bash-completion/bpftool
+++ b/tools/bpf/bpftool/bash-completion/bpftool
@@ -143,7 +143,7 @@ _bpftool_map_update_map_type()
local type
type=$(bpftool -jp map show $keyword $ref | \
command sed -n 's/.*"type": "\(.*\)",$/\1/p')
- printf $type
+ [[ -n $type ]] && printf $type
}
_bpftool_map_update_get_id()
--
2.20.1
From: "Steven Rostedt (VMware)" <[email protected]>
[ Upstream commit c2712b858187f5bcd7b042fe4daa3ba3a12635c0 ]
Andy had some concerns about using regs_get_kernel_stack_nth() in a new
function regs_get_kernel_argument() as if there's any error in the stack
code, it could cause a bad memory access. To be on the safe side, call
probe_kernel_read() on the stack address to be extra careful in accessing
the memory. A helper function, regs_get_kernel_stack_nth_addr(), was added
to just return the stack address (or NULL if not on the stack), that will be
used to find the address (and could be used by other functions) and read the
address with kernel_probe_read().
Requested-by: Andy Lutomirski <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Reviewed-by: Joel Fernandes (Google) <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/include/asm/ptrace.h | 42 +++++++++++++++++++++++++++++------
1 file changed, 35 insertions(+), 7 deletions(-)
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
index 6de1fd3d00974..ee696efec99fd 100644
--- a/arch/x86/include/asm/ptrace.h
+++ b/arch/x86/include/asm/ptrace.h
@@ -236,24 +236,52 @@ static inline int regs_within_kernel_stack(struct pt_regs *regs,
(kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1)));
}
+/**
+ * regs_get_kernel_stack_nth_addr() - get the address of the Nth entry on stack
+ * @regs: pt_regs which contains kernel stack pointer.
+ * @n: stack entry number.
+ *
+ * regs_get_kernel_stack_nth() returns the address of the @n th entry of the
+ * kernel stack which is specified by @regs. If the @n th entry is NOT in
+ * the kernel stack, this returns NULL.
+ */
+static inline unsigned long *regs_get_kernel_stack_nth_addr(struct pt_regs *regs, unsigned int n)
+{
+ unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
+
+ addr += n;
+ if (regs_within_kernel_stack(regs, (unsigned long)addr))
+ return addr;
+ else
+ return NULL;
+}
+
+/* To avoid include hell, we can't include uaccess.h */
+extern long probe_kernel_read(void *dst, const void *src, size_t size);
+
/**
* regs_get_kernel_stack_nth() - get Nth entry of the stack
* @regs: pt_regs which contains kernel stack pointer.
* @n: stack entry number.
*
* regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which
- * is specified by @regs. If the @n th entry is NOT in the kernel stack,
+ * is specified by @regs. If the @n th entry is NOT in the kernel stack
* this returns 0.
*/
static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
unsigned int n)
{
- unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
- addr += n;
- if (regs_within_kernel_stack(regs, (unsigned long)addr))
- return *addr;
- else
- return 0;
+ unsigned long *addr;
+ unsigned long val;
+ long ret;
+
+ addr = regs_get_kernel_stack_nth_addr(regs, n);
+ if (addr) {
+ ret = probe_kernel_read(&val, addr, sizeof(val));
+ if (!ret)
+ return val;
+ }
+ return 0;
}
#define arch_has_single_step() (1)
--
2.20.1
From: Marek Behún <[email protected]>
[ Upstream commit 26422340da467538cd65eaa9c65538039ee99c8c ]
This is a fix for the port_set_speed method for the Topaz family.
Currently the same method is used as for the Peridot family, but
this is wrong for the SERDES port.
On Topaz, the SERDES port is port 5, not 9 and 10 as in Peridot.
Moreover setting alt_bit on Topaz only makes sense for port 0 (for
(differentiating 100mbps vs 200mbps). The SERDES port does not
support more than 2500mbps, so alt_bit does not make any difference.
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/mv88e6xxx/chip.c | 4 ++--
drivers/net/dsa/mv88e6xxx/port.c | 25 +++++++++++++++++++++++--
drivers/net/dsa/mv88e6xxx/port.h | 1 +
3 files changed, 26 insertions(+), 4 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index d075f0f7a3de8..411ae9961bf4f 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3028,7 +3028,7 @@ static const struct mv88e6xxx_ops mv88e6141_ops = {
.port_set_link = mv88e6xxx_port_set_link,
.port_set_duplex = mv88e6xxx_port_set_duplex,
.port_set_rgmii_delay = mv88e6390_port_set_rgmii_delay,
- .port_set_speed = mv88e6390_port_set_speed,
+ .port_set_speed = mv88e6341_port_set_speed,
.port_tag_remap = mv88e6095_port_tag_remap,
.port_set_frame_mode = mv88e6351_port_set_frame_mode,
.port_set_egress_floods = mv88e6352_port_set_egress_floods,
@@ -3649,7 +3649,7 @@ static const struct mv88e6xxx_ops mv88e6341_ops = {
.port_set_link = mv88e6xxx_port_set_link,
.port_set_duplex = mv88e6xxx_port_set_duplex,
.port_set_rgmii_delay = mv88e6390_port_set_rgmii_delay,
- .port_set_speed = mv88e6390_port_set_speed,
+ .port_set_speed = mv88e6341_port_set_speed,
.port_tag_remap = mv88e6095_port_tag_remap,
.port_set_frame_mode = mv88e6351_port_set_frame_mode,
.port_set_egress_floods = mv88e6352_port_set_egress_floods,
diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c
index fdeddbfa829da..2f16a310c110e 100644
--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c
@@ -228,8 +228,11 @@ static int mv88e6xxx_port_set_speed(struct mv88e6xxx_chip *chip, int port,
ctrl = MV88E6XXX_PORT_MAC_CTL_SPEED_1000;
break;
case 2500:
- ctrl = MV88E6390_PORT_MAC_CTL_SPEED_10000 |
- MV88E6390_PORT_MAC_CTL_ALTSPEED;
+ if (alt_bit)
+ ctrl = MV88E6390_PORT_MAC_CTL_SPEED_10000 |
+ MV88E6390_PORT_MAC_CTL_ALTSPEED;
+ else
+ ctrl = MV88E6390_PORT_MAC_CTL_SPEED_10000;
break;
case 10000:
/* all bits set, fall through... */
@@ -291,6 +294,24 @@ int mv88e6185_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed)
return mv88e6xxx_port_set_speed(chip, port, speed, false, false);
}
+/* Support 10, 100, 200, 1000, 2500 Mbps (e.g. 88E6341) */
+int mv88e6341_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed)
+{
+ if (speed == SPEED_MAX)
+ speed = port < 5 ? 1000 : 2500;
+
+ if (speed > 2500)
+ return -EOPNOTSUPP;
+
+ if (speed == 200 && port != 0)
+ return -EOPNOTSUPP;
+
+ if (speed == 2500 && port < 5)
+ return -EOPNOTSUPP;
+
+ return mv88e6xxx_port_set_speed(chip, port, speed, !port, true);
+}
+
/* Support 10, 100, 200, 1000 Mbps (e.g. 88E6352 family) */
int mv88e6352_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed)
{
diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h
index 95b59f5eb3931..cbb64a7683e28 100644
--- a/drivers/net/dsa/mv88e6xxx/port.h
+++ b/drivers/net/dsa/mv88e6xxx/port.h
@@ -280,6 +280,7 @@ int mv88e6xxx_port_set_duplex(struct mv88e6xxx_chip *chip, int port, int dup);
int mv88e6065_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
int mv88e6185_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
+int mv88e6341_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
int mv88e6352_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
int mv88e6390_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
int mv88e6390x_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
--
2.20.1
From: Christoph Hellwig <[email protected]>
[ Upstream commit 6c404a68bf83b4135a8a9aa1c388ebdf98e8ba7f ]
We need to transfer device ownership to the CPU before we can manipulate
the mapped data.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/dc395x.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 08161df64ead5..3943347ec3c7c 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -1969,6 +1969,11 @@ static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
xferred -= psge->length;
} else {
/* Partial SG entry done */
+ pci_dma_sync_single_for_cpu(srb->dcb->
+ acb->dev,
+ srb->sg_bus_addr,
+ SEGMENTX_LEN,
+ PCI_DMA_TODEVICE);
psge->length -= xferred;
psge->address += xferred;
srb->sg_index = idx;
--
2.20.1
From: Marcel Ziswiler <[email protected]>
[ Upstream commit a85227da2dcc291b762c8482a505bc7d0d2d4b07 ]
Similar to the following:
commit 4321723648b0 ("ASoC: tegra_alc5632: fix device_node refcounting")
commit 7c5dfd549617 ("ASoC: tegra: fix device_node refcounting")
Signed-off-by: Marcel Ziswiler <[email protected]>
Acked-by: Jon Hunter <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/tegra/tegra_sgtl5000.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/sound/soc/tegra/tegra_sgtl5000.c b/sound/soc/tegra/tegra_sgtl5000.c
index 45a4aa9d2a479..901457da25ec3 100644
--- a/sound/soc/tegra/tegra_sgtl5000.c
+++ b/sound/soc/tegra/tegra_sgtl5000.c
@@ -149,14 +149,14 @@ static int tegra_sgtl5000_driver_probe(struct platform_device *pdev)
dev_err(&pdev->dev,
"Property 'nvidia,i2s-controller' missing/invalid\n");
ret = -EINVAL;
- goto err;
+ goto err_put_codec_of_node;
}
tegra_sgtl5000_dai.platform_of_node = tegra_sgtl5000_dai.cpu_of_node;
ret = tegra_asoc_utils_init(&machine->util_data, &pdev->dev);
if (ret)
- goto err;
+ goto err_put_cpu_of_node;
ret = snd_soc_register_card(card);
if (ret) {
@@ -169,6 +169,13 @@ static int tegra_sgtl5000_driver_probe(struct platform_device *pdev)
err_fini_utils:
tegra_asoc_utils_fini(&machine->util_data);
+err_put_cpu_of_node:
+ of_node_put(tegra_sgtl5000_dai.cpu_of_node);
+ tegra_sgtl5000_dai.cpu_of_node = NULL;
+ tegra_sgtl5000_dai.platform_of_node = NULL;
+err_put_codec_of_node:
+ of_node_put(tegra_sgtl5000_dai.codec_of_node);
+ tegra_sgtl5000_dai.codec_of_node = NULL;
err:
return ret;
}
@@ -183,6 +190,12 @@ static int tegra_sgtl5000_driver_remove(struct platform_device *pdev)
tegra_asoc_utils_fini(&machine->util_data);
+ of_node_put(tegra_sgtl5000_dai.cpu_of_node);
+ tegra_sgtl5000_dai.cpu_of_node = NULL;
+ tegra_sgtl5000_dai.platform_of_node = NULL;
+ of_node_put(tegra_sgtl5000_dai.codec_of_node);
+ tegra_sgtl5000_dai.codec_of_node = NULL;
+
return ret;
}
--
2.20.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit 761c830ec7b3d0674b3ad89cefd77a692634e305 ]
Clang warns when one enumerated type is implicitly converted to another.
drivers/scsi/bfa/bfa_fcs_lport.c:379:26: warning: implicit conversion
from enumeration type 'enum bfa_lport_aen_event' to different
enumeration type 'enum bfa_ioc_aen_event' [-Wenum-conversion]
BFA_AEN_CAT_LPORT, event);
^~~~~
The root cause of these warnings is the bfad_im_post_vendor_event
function, which expects a value from enum bfa_ioc_aen_event but there
are multiple instances of values from enums bfa_port_aen_event,
bfa_audit_aen_event, and bfa_lport_aen_event being used in this
function.
Given that this doesn't appear to be a problem since cat helps with
differentiating the events, just change evt's type to int so that no
conversion needs to happen and Clang won't warn. Update aen_type's type
in bfa_aen_entry_s as members that hold enumerated types should be int.
Link: https://github.com/ClangBuiltLinux/linux/issues/147
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/bfa/bfa_defs_svc.h | 2 +-
drivers/scsi/bfa/bfad_im.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/bfa/bfa_defs_svc.h b/drivers/scsi/bfa/bfa_defs_svc.h
index 3d0c96a5c8735..c19c26e0e405e 100644
--- a/drivers/scsi/bfa/bfa_defs_svc.h
+++ b/drivers/scsi/bfa/bfa_defs_svc.h
@@ -1453,7 +1453,7 @@ union bfa_aen_data_u {
struct bfa_aen_entry_s {
struct list_head qe;
enum bfa_aen_category aen_category;
- u32 aen_type;
+ int aen_type;
union bfa_aen_data_u aen_data;
u64 aen_tv_sec;
u64 aen_tv_usec;
diff --git a/drivers/scsi/bfa/bfad_im.h b/drivers/scsi/bfa/bfad_im.h
index e61ed8dad0b4f..bd4ac187fd8e7 100644
--- a/drivers/scsi/bfa/bfad_im.h
+++ b/drivers/scsi/bfa/bfad_im.h
@@ -143,7 +143,7 @@ struct bfad_im_s {
static inline void bfad_im_post_vendor_event(struct bfa_aen_entry_s *entry,
struct bfad_s *drv, int cnt,
enum bfa_aen_category cat,
- enum bfa_ioc_aen_event evt)
+ int evt)
{
struct timespec64 ts;
--
2.20.1
From: Michael Ellerman <[email protected]>
[ Upstream commit 3b5657ed5b4e27ccf593a41ff3c5aa27dae8df18 ]
When we have CONFIG_STRICT_KERNEL_RWX enabled, we want to split the
linear mapping at the text/data boundary so we can map the kernel text
read only.
But the current logic uses small pages for the entire text section,
regardless of whether a larger page size would fit. eg. with the
boundary at 16M we could use 2M pages, but instead we use 64K pages up
to the 16M boundary:
Mapped 0x0000000000000000-0x0000000001000000 with 64.0 KiB pages
Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages
Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages
This is because the test is checking if addr is < __init_begin
and addr + mapping_size is >= _stext. But that is true for all pages
between _stext and __init_begin.
Instead what we want to check is if we are crossing the text/data
boundary, which is at __init_begin. With that fixed we see:
Mapped 0x0000000000000000-0x0000000000e00000 with 2.00 MiB pages
Mapped 0x0000000000e00000-0x0000000001000000 with 64.0 KiB pages
Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages
Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages
ie. we're correctly using 2MB pages below __init_begin, but we still
drop down to 64K pages unnecessarily at the boundary.
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/mm/pgtable-radix.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/mm/pgtable-radix.c b/arch/powerpc/mm/pgtable-radix.c
index 24a2eadc8c21a..b387c7b917b7e 100644
--- a/arch/powerpc/mm/pgtable-radix.c
+++ b/arch/powerpc/mm/pgtable-radix.c
@@ -295,14 +295,14 @@ static int __meminit create_physical_mapping(unsigned long start,
if (split_text_mapping && (mapping_size == PUD_SIZE) &&
(addr < __pa_symbol(__init_begin)) &&
- (addr + mapping_size) >= __pa_symbol(_stext)) {
+ (addr + mapping_size) >= __pa_symbol(__init_begin)) {
max_mapping_size = PMD_SIZE;
goto retry;
}
if (split_text_mapping && (mapping_size == PMD_SIZE) &&
(addr < __pa_symbol(__init_begin)) &&
- (addr + mapping_size) >= __pa_symbol(_stext)) {
+ (addr + mapping_size) >= __pa_symbol(__init_begin)) {
mapping_size = PAGE_SIZE;
psize = mmu_virtual_psize;
}
--
2.20.1
From: Bart Van Assche <[email protected]>
[ Upstream commit 8eacd1bd21d6913ec27e6120e9a8733352e191d3 ]
Although I'm not sure whether it is a good idea to support large discard
commands, I think integer overflow for discard ranges larger than 4 GB
should be avoided. This patch avoids that smatch reports the following:
drivers/nvme/target/io-cmd-file.c:249:1 nvmet_file_execute_discard() warn: should '((range.nlb)) << req->ns->blksize_shift' be a 64 bit type?
Fixes: d5eff33ee6f8 ("nvmet: add simple file backed ns support")
Signed-off-by: Bart Van Assche <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/target/io-cmd-file.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/nvme/target/io-cmd-file.c b/drivers/nvme/target/io-cmd-file.c
index 81a9dc5290a87..39d972e2595f0 100644
--- a/drivers/nvme/target/io-cmd-file.c
+++ b/drivers/nvme/target/io-cmd-file.c
@@ -246,7 +246,8 @@ static void nvmet_file_execute_discard(struct nvmet_req *req)
break;
offset = le64_to_cpu(range.slba) << req->ns->blksize_shift;
- len = le32_to_cpu(range.nlb) << req->ns->blksize_shift;
+ len = le32_to_cpu(range.nlb);
+ len <<= req->ns->blksize_shift;
if (offset + len > req->ns->size) {
ret = NVME_SC_LBA_RANGE | NVME_SC_DNR;
break;
--
2.20.1
From: Joseph Lo <[email protected]>
[ Upstream commit a4dbbceeee3e0ba670875a147237d6566de78840 ]
Fix some incorrect data in LVL2 offset and bit mask.
Fixes: e403d0057343 ("clk: tegra: MBIST work around for Tegra210")
Signed-off-by: Joseph Lo <[email protected]>
Signed-off-by: Peter De Schrijver <[email protected]>
Acked-by: Jon Hunter <[email protected]>
Acked-by: Peter De Schrijver <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/tegra/clk-tegra210.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 080bfa24863ee..7264e97310348 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -2603,7 +2603,7 @@ static struct tegra210_domain_mbist_war tegra210_pg_mbist_war[] = {
[TEGRA_POWERGATE_MPE] = {
.handle_lvl2_ovr = tegra210_generic_mbist_war,
.lvl2_offset = LVL2_CLK_GATE_OVRE,
- .lvl2_mask = BIT(2),
+ .lvl2_mask = BIT(29),
},
[TEGRA_POWERGATE_SOR] = {
.handle_lvl2_ovr = tegra210_generic_mbist_war,
@@ -2654,14 +2654,14 @@ static struct tegra210_domain_mbist_war tegra210_pg_mbist_war[] = {
.num_clks = ARRAY_SIZE(nvdec_slcg_clkids),
.clk_init_data = nvdec_slcg_clkids,
.handle_lvl2_ovr = tegra210_generic_mbist_war,
- .lvl2_offset = LVL2_CLK_GATE_OVRC,
+ .lvl2_offset = LVL2_CLK_GATE_OVRE,
.lvl2_mask = BIT(9) | BIT(31),
},
[TEGRA_POWERGATE_NVJPG] = {
.num_clks = ARRAY_SIZE(nvjpg_slcg_clkids),
.clk_init_data = nvjpg_slcg_clkids,
.handle_lvl2_ovr = tegra210_generic_mbist_war,
- .lvl2_offset = LVL2_CLK_GATE_OVRC,
+ .lvl2_offset = LVL2_CLK_GATE_OVRE,
.lvl2_mask = BIT(9) | BIT(31),
},
[TEGRA_POWERGATE_AUD] = {
--
2.20.1
From: "David S. Miller" <[email protected]>
[ Upstream commit 46b8306480fb424abd525acc1763da1c63a27d8a ]
If PARPORT_PC_FIFO is not enabled, do not provide the dma lock
macros and lock definition. Otherwise:
./arch/sparc/include/asm/parport.h:24:24: warning: ‘dma_spin_lock’ defined but not used [-Wunused-variable]
static DEFINE_SPINLOCK(dma_spin_lock);
^~~~~~~~~~~~~
./include/linux/spinlock_types.h:81:39: note: in definition of macro ‘DEFINE_SPINLOCK’
#define DEFINE_SPINLOCK(x) spinlock_t x = __SPIN_LOCK_UNLOCKED(x)
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/sparc/include/asm/parport.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/sparc/include/asm/parport.h b/arch/sparc/include/asm/parport.h
index 05df5f0430535..3c5a1c620f0f7 100644
--- a/arch/sparc/include/asm/parport.h
+++ b/arch/sparc/include/asm/parport.h
@@ -21,6 +21,7 @@
*/
#define HAS_DMA
+#ifdef CONFIG_PARPORT_PC_FIFO
static DEFINE_SPINLOCK(dma_spin_lock);
#define claim_dma_lock() \
@@ -31,6 +32,7 @@ static DEFINE_SPINLOCK(dma_spin_lock);
#define release_dma_lock(__flags) \
spin_unlock_irqrestore(&dma_spin_lock, __flags);
+#endif
static struct sparc_ebus_info {
struct ebus_dma_info info;
--
2.20.1
From: Vignesh R <[email protected]>
[ Upstream commit b682cffa3ac6d9d9e16e9b413c45caee3b391fab ]
McSPI has 32 byte FIFO in Transmit-Receive mode. Current code tries to
configuration FIFO watermark level for DMA trigger to be GCD of transfer
length and max FIFO size which would mean trigger level may be set to 32
for transmit-receive mode if length is aligned. This does not work in
case of SPI slave mode where FIFO always needs to have data ready
whenever master starts the clock. With DMA trigger size of 32 there will
be a small window during slave TX where DMA is still putting data into
FIFO but master would have started clock for next byte, resulting in
shifting out of stale data. Similarly, on Slave RX side there may be RX
FIFO overflow
Fix this by setting FIFO watermark for DMA trigger to word
length. This means DMA is triggered as soon as FIFO has space for word
length bytes and DMA would make sure FIFO is almost always full
therefore improving FIFO occupancy in both master and slave mode.
Signed-off-by: Vignesh R <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-omap2-mcspi.c | 26 +++++++-------------------
1 file changed, 7 insertions(+), 19 deletions(-)
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index e2be7da743438..f50cb8a4b4138 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -299,7 +299,7 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
struct omap2_mcspi_cs *cs = spi->controller_state;
struct omap2_mcspi *mcspi;
unsigned int wcnt;
- int max_fifo_depth, fifo_depth, bytes_per_word;
+ int max_fifo_depth, bytes_per_word;
u32 chconf, xferlevel;
mcspi = spi_master_get_devdata(master);
@@ -315,10 +315,6 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
else
max_fifo_depth = OMAP2_MCSPI_MAX_FIFODEPTH;
- fifo_depth = gcd(t->len, max_fifo_depth);
- if (fifo_depth < 2 || fifo_depth % bytes_per_word != 0)
- goto disable_fifo;
-
wcnt = t->len / bytes_per_word;
if (wcnt > OMAP2_MCSPI_MAX_FIFOWCNT)
goto disable_fifo;
@@ -326,16 +322,17 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
xferlevel = wcnt << 16;
if (t->rx_buf != NULL) {
chconf |= OMAP2_MCSPI_CHCONF_FFER;
- xferlevel |= (fifo_depth - 1) << 8;
+ xferlevel |= (bytes_per_word - 1) << 8;
}
+
if (t->tx_buf != NULL) {
chconf |= OMAP2_MCSPI_CHCONF_FFET;
- xferlevel |= fifo_depth - 1;
+ xferlevel |= bytes_per_word - 1;
}
mcspi_write_reg(master, OMAP2_MCSPI_XFERLEVEL, xferlevel);
mcspi_write_chconf0(spi, chconf);
- mcspi->fifo_depth = fifo_depth;
+ mcspi->fifo_depth = max_fifo_depth;
return;
}
@@ -585,7 +582,6 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
struct dma_slave_config cfg;
enum dma_slave_buswidth width;
unsigned es;
- u32 burst;
void __iomem *chstat_reg;
void __iomem *irqstat_reg;
int wait_res;
@@ -605,22 +601,14 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
}
count = xfer->len;
- burst = 1;
-
- if (mcspi->fifo_depth > 0) {
- if (count > mcspi->fifo_depth)
- burst = mcspi->fifo_depth / es;
- else
- burst = count / es;
- }
memset(&cfg, 0, sizeof(cfg));
cfg.src_addr = cs->phys + OMAP2_MCSPI_RX0;
cfg.dst_addr = cs->phys + OMAP2_MCSPI_TX0;
cfg.src_addr_width = width;
cfg.dst_addr_width = width;
- cfg.src_maxburst = burst;
- cfg.dst_maxburst = burst;
+ cfg.src_maxburst = es;
+ cfg.dst_maxburst = es;
rx = xfer->rx_buf;
tx = xfer->tx_buf;
--
2.20.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit e9e9a103528c7e199ead6e5374c9c52cf16b5802 ]
Clang warns when one enumerated type is implicitly converted to another.
drivers/scsi/isci/request.c:1629:13: warning: implicit conversion from
enumeration type 'enum sci_io_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
status = SCI_IO_FAILURE_RESPONSE_VALID;
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/isci/request.c:1631:12: warning: implicit conversion from
enumeration type 'enum sci_io_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
status = SCI_IO_FAILURE_RESPONSE_VALID;
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
status is of type sci_status but SCI_IO_FAILURE_RESPONSE_VALID is of
type sci_io_status. Use SCI_FAILURE_IO_RESPONSE_VALID, which is from
sci_status and has SCI_IO_FAILURE_RESPONSE_VALID's exact value since
that is what SCI_IO_FAILURE_RESPONSE_VALID is mapped to in the isci.h
file.
Link: https://github.com/ClangBuiltLinux/linux/issues/153
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/isci/request.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index ed197bc8e801a..2f151708b59ae 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -1626,9 +1626,9 @@ static enum sci_status atapi_d2h_reg_frame_handler(struct isci_request *ireq,
if (status == SCI_SUCCESS) {
if (ireq->stp.rsp.status & ATA_ERR)
- status = SCI_IO_FAILURE_RESPONSE_VALID;
+ status = SCI_FAILURE_IO_RESPONSE_VALID;
} else {
- status = SCI_IO_FAILURE_RESPONSE_VALID;
+ status = SCI_FAILURE_IO_RESPONSE_VALID;
}
if (status != SCI_SUCCESS) {
--
2.20.1
From: Colin Ian King <[email protected]>
[ Upstream commit e325808c0051b16729ffd472ff887c6cae5c6317 ]
Currently the call to atoi is being passed a single char string
that is not null terminated, so there is a potential read overrun
along the stack when parsing for an integer value. Fix this by
instead using a 2 char string that is initialized to all zeros
to ensure that a 1 char read into the string is always terminated
with a \0.
Detected by cppcheck:
"Invalid atoi() argument nr 1. A nul-terminated string is required."
Fixes: 3391ba0e2792 ("usbip: tools: Extract generic code to be shared with vudc backend")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/usb/usbip/libsrc/usbip_host_common.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/tools/usb/usbip/libsrc/usbip_host_common.c b/tools/usb/usbip/libsrc/usbip_host_common.c
index dc93fadbee963..d79c7581b175f 100644
--- a/tools/usb/usbip/libsrc/usbip_host_common.c
+++ b/tools/usb/usbip/libsrc/usbip_host_common.c
@@ -43,7 +43,7 @@ static int32_t read_attr_usbip_status(struct usbip_usb_device *udev)
int size;
int fd;
int length;
- char status;
+ char status[2] = { 0 };
int value = 0;
size = snprintf(status_attr_path, sizeof(status_attr_path),
@@ -61,14 +61,14 @@ static int32_t read_attr_usbip_status(struct usbip_usb_device *udev)
return -1;
}
- length = read(fd, &status, 1);
+ length = read(fd, status, 1);
if (length < 0) {
err("error reading attribute %s", status_attr_path);
close(fd);
return -1;
}
- value = atoi(&status);
+ value = atoi(status);
return value;
}
--
2.20.1
From: Sean Christopherson <[email protected]>
[ Upstream commit 7671ce21b13b9596163a29f4712cb2451a9b97dc ]
In preparation of supporting checkpoint/restore for nested state,
commit ca0bde28f2ed ("kvm: nVMX: Split VMCS checks from nested_vmx_run()")
modified check_vmentry_postreqs() to only perform the guest EFER
consistency checks when nested_run_pending is true. But, in the
normal nested VMEntry flow, nested_run_pending is only set after
check_vmentry_postreqs(), i.e. the consistency check is being skipped.
Alternatively, nested_run_pending could be set prior to calling
check_vmentry_postreqs() in nested_vmx_run(), but placing the
consistency checks in nested_vmx_enter_non_root_mode() allows us
to split prepare_vmcs02() and interleave the preparation with
the consistency checks without having to change the call sites
of nested_vmx_enter_non_root_mode(). In other words, the rest
of the consistency check code in nested_vmx_run() will be joining
the postreqs checks in future patches.
Fixes: ca0bde28f2ed ("kvm: nVMX: Split VMCS checks from nested_vmx_run()")
Signed-off-by: Sean Christopherson <[email protected]>
Cc: Jim Mattson <[email protected]>
Reviewed-by: Jim Mattson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/vmx.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 8c7554d7f0a80..3f40edf6fdeb3 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -12695,6 +12695,9 @@ static int enter_vmx_non_root_mode(struct kvm_vcpu *vcpu, u32 *exit_qual)
if (likely(!evaluate_pending_interrupts) && kvm_vcpu_apicv_active(vcpu))
evaluate_pending_interrupts |= vmx_has_apicv_interrupt(vcpu);
+ if (from_vmentry && check_vmentry_postreqs(vcpu, vmcs12, exit_qual))
+ return EXIT_REASON_INVALID_STATE;
+
enter_guest_mode(vcpu);
if (!(vmcs12->vm_entry_controls & VM_ENTRY_LOAD_DEBUG_CONTROLS))
@@ -12837,13 +12840,6 @@ static int nested_vmx_run(struct kvm_vcpu *vcpu, bool launch)
*/
skip_emulated_instruction(vcpu);
- ret = check_vmentry_postreqs(vcpu, vmcs12, &exit_qual);
- if (ret) {
- nested_vmx_entry_failure(vcpu, vmcs12,
- EXIT_REASON_INVALID_STATE, exit_qual);
- return 1;
- }
-
/*
* We're finally done with prerequisite checking, and can start with
* the nested entry.
--
2.20.1
From: Jakub Kicinski <[email protected]>
[ Upstream commit 527db74b71ee5a279f818aae51f2c26b4e5c7648 ]
Atomic operations on the NFP are currently always in big endian.
The driver keeps track of regions of memory storing atomic values
and byte swaps them accordingly. There are corner cases where
the map values may be initialized before the driver knows they
are used as atomic counters. This can happen either when the
datapath is performing the update and the stack contents are
unknown or when map is updated before the program which will
use it for atomic values is loaded.
To avoid situation where user initializes the value to 0 1 2 3
and then after loading a program which uses the word as an atomic
counter starts reading 3 2 1 0 - only allow atomic counters to be
initialized to endian-neutral values.
For updates from the datapath the stack information may not be
as precise, so just allow initializing such values to 0.
Example code which would break:
struct bpf_map_def SEC("maps") rxcnt = {
.type = BPF_MAP_TYPE_HASH,
.key_size = sizeof(__u32),
.value_size = sizeof(__u64),
.max_entries = 1,
};
int xdp_prog1()
{
__u64 nonzeroval = 3;
__u32 key = 0;
__u64 *value;
value = bpf_map_lookup_elem(&rxcnt, &key);
if (!value)
bpf_map_update_elem(&rxcnt, &key, &nonzeroval, BPF_ANY);
else
__sync_fetch_and_add(value, 1);
return XDP_PASS;
}
$ offload bpftool map dump
key: 00 00 00 00 value: 00 00 00 03 00 00 00 00
should be:
$ offload bpftool map dump
key: 00 00 00 00 value: 03 00 00 00 00 00 00 00
Reported-by: David Beckett <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/netronome/nfp/bpf/main.h | 7 ++-
.../net/ethernet/netronome/nfp/bpf/offload.c | 18 +++++-
.../net/ethernet/netronome/nfp/bpf/verifier.c | 58 +++++++++++++++++--
3 files changed, 76 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/netronome/nfp/bpf/main.h b/drivers/net/ethernet/netronome/nfp/bpf/main.h
index dbd00982fd2b6..2134045e14c36 100644
--- a/drivers/net/ethernet/netronome/nfp/bpf/main.h
+++ b/drivers/net/ethernet/netronome/nfp/bpf/main.h
@@ -206,6 +206,11 @@ enum nfp_bpf_map_use {
NFP_MAP_USE_ATOMIC_CNT,
};
+struct nfp_bpf_map_word {
+ unsigned char type :4;
+ unsigned char non_zero_update :1;
+};
+
/**
* struct nfp_bpf_map - private per-map data attached to BPF maps for offload
* @offmap: pointer to the offloaded BPF map
@@ -219,7 +224,7 @@ struct nfp_bpf_map {
struct nfp_app_bpf *bpf;
u32 tid;
struct list_head l;
- enum nfp_bpf_map_use use_map[];
+ struct nfp_bpf_map_word use_map[];
};
struct nfp_bpf_neutral_map {
diff --git a/drivers/net/ethernet/netronome/nfp/bpf/offload.c b/drivers/net/ethernet/netronome/nfp/bpf/offload.c
index 1ccd6371a15b5..6140e4650b71c 100644
--- a/drivers/net/ethernet/netronome/nfp/bpf/offload.c
+++ b/drivers/net/ethernet/netronome/nfp/bpf/offload.c
@@ -299,10 +299,25 @@ static void nfp_map_bpf_byte_swap(struct nfp_bpf_map *nfp_map, void *value)
unsigned int i;
for (i = 0; i < DIV_ROUND_UP(nfp_map->offmap->map.value_size, 4); i++)
- if (nfp_map->use_map[i] == NFP_MAP_USE_ATOMIC_CNT)
+ if (nfp_map->use_map[i].type == NFP_MAP_USE_ATOMIC_CNT)
word[i] = (__force u32)cpu_to_be32(word[i]);
}
+/* Mark value as unsafely initialized in case it becomes atomic later
+ * and we didn't byte swap something non-byte swap neutral.
+ */
+static void
+nfp_map_bpf_byte_swap_record(struct nfp_bpf_map *nfp_map, void *value)
+{
+ u32 *word = value;
+ unsigned int i;
+
+ for (i = 0; i < DIV_ROUND_UP(nfp_map->offmap->map.value_size, 4); i++)
+ if (nfp_map->use_map[i].type == NFP_MAP_UNUSED &&
+ word[i] != (__force u32)cpu_to_be32(word[i]))
+ nfp_map->use_map[i].non_zero_update = 1;
+}
+
static int
nfp_bpf_map_lookup_entry(struct bpf_offloaded_map *offmap,
void *key, void *value)
@@ -322,6 +337,7 @@ nfp_bpf_map_update_entry(struct bpf_offloaded_map *offmap,
void *key, void *value, u64 flags)
{
nfp_map_bpf_byte_swap(offmap->dev_priv, value);
+ nfp_map_bpf_byte_swap_record(offmap->dev_priv, value);
return nfp_bpf_ctrl_update_entry(offmap, key, value, flags);
}
diff --git a/drivers/net/ethernet/netronome/nfp/bpf/verifier.c b/drivers/net/ethernet/netronome/nfp/bpf/verifier.c
index a6e9248669e14..db7e186dae56d 100644
--- a/drivers/net/ethernet/netronome/nfp/bpf/verifier.c
+++ b/drivers/net/ethernet/netronome/nfp/bpf/verifier.c
@@ -108,6 +108,46 @@ nfp_record_adjust_head(struct nfp_app_bpf *bpf, struct nfp_prog *nfp_prog,
nfp_prog->adjust_head_location = location;
}
+static bool nfp_bpf_map_update_value_ok(struct bpf_verifier_env *env)
+{
+ const struct bpf_reg_state *reg1 = cur_regs(env) + BPF_REG_1;
+ const struct bpf_reg_state *reg3 = cur_regs(env) + BPF_REG_3;
+ struct bpf_offloaded_map *offmap;
+ struct bpf_func_state *state;
+ struct nfp_bpf_map *nfp_map;
+ int off, i;
+
+ state = env->cur_state->frame[reg3->frameno];
+
+ /* We need to record each time update happens with non-zero words,
+ * in case such word is used in atomic operations.
+ * Implicitly depend on nfp_bpf_stack_arg_ok(reg3) being run before.
+ */
+
+ offmap = map_to_offmap(reg1->map_ptr);
+ nfp_map = offmap->dev_priv;
+ off = reg3->off + reg3->var_off.value;
+
+ for (i = 0; i < offmap->map.value_size; i++) {
+ struct bpf_stack_state *stack_entry;
+ unsigned int soff;
+
+ soff = -(off + i) - 1;
+ stack_entry = &state->stack[soff / BPF_REG_SIZE];
+ if (stack_entry->slot_type[soff % BPF_REG_SIZE] == STACK_ZERO)
+ continue;
+
+ if (nfp_map->use_map[i / 4].type == NFP_MAP_USE_ATOMIC_CNT) {
+ pr_vlog(env, "value at offset %d/%d may be non-zero, bpf_map_update_elem() is required to initialize atomic counters to zero to avoid offload endian issues\n",
+ i, soff);
+ return false;
+ }
+ nfp_map->use_map[i / 4].non_zero_update = 1;
+ }
+
+ return true;
+}
+
static int
nfp_bpf_stack_arg_ok(const char *fname, struct bpf_verifier_env *env,
const struct bpf_reg_state *reg,
@@ -198,7 +238,8 @@ nfp_bpf_check_call(struct nfp_prog *nfp_prog, struct bpf_verifier_env *env,
bpf->helpers.map_update, reg1) ||
!nfp_bpf_stack_arg_ok("map_update", env, reg2,
meta->func_id ? &meta->arg2 : NULL) ||
- !nfp_bpf_stack_arg_ok("map_update", env, reg3, NULL))
+ !nfp_bpf_stack_arg_ok("map_update", env, reg3, NULL) ||
+ !nfp_bpf_map_update_value_ok(env))
return -EOPNOTSUPP;
break;
@@ -376,15 +417,22 @@ nfp_bpf_map_mark_used_one(struct bpf_verifier_env *env,
struct nfp_bpf_map *nfp_map,
unsigned int off, enum nfp_bpf_map_use use)
{
- if (nfp_map->use_map[off / 4] != NFP_MAP_UNUSED &&
- nfp_map->use_map[off / 4] != use) {
+ if (nfp_map->use_map[off / 4].type != NFP_MAP_UNUSED &&
+ nfp_map->use_map[off / 4].type != use) {
pr_vlog(env, "map value use type conflict %s vs %s off: %u\n",
- nfp_bpf_map_use_name(nfp_map->use_map[off / 4]),
+ nfp_bpf_map_use_name(nfp_map->use_map[off / 4].type),
nfp_bpf_map_use_name(use), off);
return -EOPNOTSUPP;
}
- nfp_map->use_map[off / 4] = use;
+ if (nfp_map->use_map[off / 4].non_zero_update &&
+ use == NFP_MAP_USE_ATOMIC_CNT) {
+ pr_vlog(env, "atomic counter in map value may already be initialized to non-zero value off: %u\n",
+ off);
+ return -EOPNOTSUPP;
+ }
+
+ nfp_map->use_map[off / 4].type = use;
return 0;
}
--
2.20.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit a93a676b079144009f55fff2ab0e34c3b7258c8a ]
If 'krealloc()' fails, 'pctl->functions' is set to NULL.
We should instead use a temp variable in order to be able to free the
previously allocated memeory, in case of OOM.
Signed-off-by: Christophe JAILLET <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index 26ebedc1f6d31..61aaaf58c5993 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -1042,6 +1042,7 @@ static int sunxi_pinctrl_add_function(struct sunxi_pinctrl *pctl,
static int sunxi_pinctrl_build_state(struct platform_device *pdev)
{
struct sunxi_pinctrl *pctl = platform_get_drvdata(pdev);
+ void *ptr;
int i;
/*
@@ -1108,13 +1109,15 @@ static int sunxi_pinctrl_build_state(struct platform_device *pdev)
}
/* And now allocated and fill the array for real */
- pctl->functions = krealloc(pctl->functions,
- pctl->nfunctions * sizeof(*pctl->functions),
- GFP_KERNEL);
- if (!pctl->functions) {
+ ptr = krealloc(pctl->functions,
+ pctl->nfunctions * sizeof(*pctl->functions),
+ GFP_KERNEL);
+ if (!ptr) {
kfree(pctl->functions);
+ pctl->functions = NULL;
return -ENOMEM;
}
+ pctl->functions = ptr;
for (i = 0; i < pctl->desc->npins; i++) {
const struct sunxi_desc_pin *pin = pctl->desc->pins + i;
--
2.20.1
From: Christoph Hellwig <[email protected]>
[ Upstream commit 3a5bd7021184dec2946f2a4d7a8943f8a5713e52 ]
We can't just transfer ownership to the CPU and then unmap, as this will
break with swiotlb.
Instead unmap the command and sense buffer a little earlier in the I/O
completion handler and get rid of the pci_dma_sync_sg_for_cpu call
entirely.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/dc395x.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 1ed2cd82129d2..08161df64ead5 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -3447,14 +3447,12 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
}
}
- if (dir != PCI_DMA_NONE && scsi_sg_count(cmd))
- pci_dma_sync_sg_for_cpu(acb->dev, scsi_sglist(cmd),
- scsi_sg_count(cmd), dir);
-
ckc_only = 0;
/* Check Error Conditions */
ckc_e:
+ pci_unmap_srb(acb, srb);
+
if (cmd->cmnd[0] == INQUIRY) {
unsigned char *base = NULL;
struct ScsiInqData *ptr;
@@ -3507,7 +3505,6 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
cmd, cmd->result);
srb_free_insert(acb, srb);
}
- pci_unmap_srb(acb, srb);
cmd->scsi_done(cmd);
waiting_process_next(acb);
--
2.20.1
From: Rahul Verma <[email protected]>
[ Upstream commit 706d08913d1f68610c32b4a001026aa989878dd9 ]
Align the use of local PTT to propagate through the qed_mcp* API's.
Global ptt should not be used.
Register access should be done through layers. Register address is
mapped into a PTT, PF translation table. Several interface functions
require a PTT to direct read/write into register. There is a pool of
PTT maintained, and several PTT are used simultaneously to access
device registers in different flows. Same PTT should not be used in
flows that can run concurrently.
To avoid running out of PTT resources, too many PTT should not be
acquired without releasing them. Every PF has a global PTT, which is
used throughout the life of PF, in most important flows for register
access. Generic functions acquire the PTT locally and release after
the use. This patch aligns the use of Global PTT and Local PTT
accordingly.
Signed-off-by: Rahul Verma <[email protected]>
Signed-off-by: Ariel Elior <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/qlogic/qed/qed.h | 2 +-
drivers/net/ethernet/qlogic/qed/qed_main.c | 22 ++++++++++++++----
drivers/net/ethernet/qlogic/qed/qed_mcp.c | 27 ++++++++++------------
drivers/net/ethernet/qlogic/qed/qed_mcp.h | 5 ++--
drivers/net/ethernet/qlogic/qed/qed_vf.c | 2 +-
5 files changed, 35 insertions(+), 23 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed.h b/drivers/net/ethernet/qlogic/qed/qed.h
index a60e1c8d470a0..32e786a3952b1 100644
--- a/drivers/net/ethernet/qlogic/qed/qed.h
+++ b/drivers/net/ethernet/qlogic/qed/qed.h
@@ -914,7 +914,7 @@ u16 qed_get_cm_pq_idx_llt_mtc(struct qed_hwfn *p_hwfn, u8 tc);
/* Prototypes */
int qed_fill_dev_info(struct qed_dev *cdev,
struct qed_dev_info *dev_info);
-void qed_link_update(struct qed_hwfn *hwfn);
+void qed_link_update(struct qed_hwfn *hwfn, struct qed_ptt *ptt);
u32 qed_unzip_data(struct qed_hwfn *p_hwfn,
u32 input_len, u8 *input_buf,
u32 max_size, u8 *unzip_buf);
diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index 637687b766ff0..049a83b40e469 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -1462,6 +1462,7 @@ static int qed_get_link_data(struct qed_hwfn *hwfn,
}
static void qed_fill_link(struct qed_hwfn *hwfn,
+ struct qed_ptt *ptt,
struct qed_link_output *if_link)
{
struct qed_mcp_link_params params;
@@ -1542,7 +1543,7 @@ static void qed_fill_link(struct qed_hwfn *hwfn,
/* TODO - fill duplex properly */
if_link->duplex = DUPLEX_FULL;
- qed_mcp_get_media_type(hwfn->cdev, &media_type);
+ qed_mcp_get_media_type(hwfn, ptt, &media_type);
if_link->port = qed_get_port_type(media_type);
if_link->autoneg = params.speed.autoneg;
@@ -1598,21 +1599,34 @@ static void qed_fill_link(struct qed_hwfn *hwfn,
static void qed_get_current_link(struct qed_dev *cdev,
struct qed_link_output *if_link)
{
+ struct qed_hwfn *hwfn;
+ struct qed_ptt *ptt;
int i;
- qed_fill_link(&cdev->hwfns[0], if_link);
+ hwfn = &cdev->hwfns[0];
+ if (IS_PF(cdev)) {
+ ptt = qed_ptt_acquire(hwfn);
+ if (ptt) {
+ qed_fill_link(hwfn, ptt, if_link);
+ qed_ptt_release(hwfn, ptt);
+ } else {
+ DP_NOTICE(hwfn, "Failed to fill link; No PTT\n");
+ }
+ } else {
+ qed_fill_link(hwfn, NULL, if_link);
+ }
for_each_hwfn(cdev, i)
qed_inform_vf_link_state(&cdev->hwfns[i]);
}
-void qed_link_update(struct qed_hwfn *hwfn)
+void qed_link_update(struct qed_hwfn *hwfn, struct qed_ptt *ptt)
{
void *cookie = hwfn->cdev->ops_cookie;
struct qed_common_cb_ops *op = hwfn->cdev->protocol_ops.common;
struct qed_link_output if_link;
- qed_fill_link(hwfn, &if_link);
+ qed_fill_link(hwfn, ptt, &if_link);
qed_inform_vf_link_state(hwfn);
if (IS_LEAD_HWFN(hwfn) && cookie)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
index 58c7eb9d8e1b8..938ace333af10 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
@@ -1382,7 +1382,7 @@ static void qed_mcp_handle_link_change(struct qed_hwfn *p_hwfn,
if (p_hwfn->mcp_info->capabilities & FW_MB_PARAM_FEATURE_SUPPORT_EEE)
qed_mcp_read_eee_config(p_hwfn, p_ptt, p_link);
- qed_link_update(p_hwfn);
+ qed_link_update(p_hwfn, p_ptt);
out:
spin_unlock_bh(&p_hwfn->mcp_info->link_lock);
}
@@ -1849,12 +1849,10 @@ int qed_mcp_get_mbi_ver(struct qed_hwfn *p_hwfn,
return 0;
}
-int qed_mcp_get_media_type(struct qed_dev *cdev, u32 *p_media_type)
+int qed_mcp_get_media_type(struct qed_hwfn *p_hwfn,
+ struct qed_ptt *p_ptt, u32 *p_media_type)
{
- struct qed_hwfn *p_hwfn = &cdev->hwfns[0];
- struct qed_ptt *p_ptt;
-
- if (IS_VF(cdev))
+ if (IS_VF(p_hwfn->cdev))
return -EINVAL;
if (!qed_mcp_is_init(p_hwfn)) {
@@ -1862,16 +1860,15 @@ int qed_mcp_get_media_type(struct qed_dev *cdev, u32 *p_media_type)
return -EBUSY;
}
- *p_media_type = MEDIA_UNSPECIFIED;
-
- p_ptt = qed_ptt_acquire(p_hwfn);
- if (!p_ptt)
- return -EBUSY;
-
- *p_media_type = qed_rd(p_hwfn, p_ptt, p_hwfn->mcp_info->port_addr +
- offsetof(struct public_port, media_type));
+ if (!p_ptt) {
+ *p_media_type = MEDIA_UNSPECIFIED;
+ return -EINVAL;
+ }
- qed_ptt_release(p_hwfn, p_ptt);
+ *p_media_type = qed_rd(p_hwfn, p_ptt,
+ p_hwfn->mcp_info->port_addr +
+ offsetof(struct public_port,
+ media_type));
return 0;
}
diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.h b/drivers/net/ethernet/qlogic/qed/qed_mcp.h
index 85e6b3989e7a9..80a6b5d1ff338 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_mcp.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.h
@@ -322,14 +322,15 @@ int qed_mcp_get_mbi_ver(struct qed_hwfn *p_hwfn,
* @brief Get media type value of the port.
*
* @param cdev - qed dev pointer
+ * @param p_ptt
* @param mfw_ver - media type value
*
* @return int -
* 0 - Operation was successul.
* -EBUSY - Operation failed
*/
-int qed_mcp_get_media_type(struct qed_dev *cdev,
- u32 *media_type);
+int qed_mcp_get_media_type(struct qed_hwfn *p_hwfn,
+ struct qed_ptt *p_ptt, u32 *media_type);
/**
* @brief General function for sending commands to the MCP
diff --git a/drivers/net/ethernet/qlogic/qed/qed_vf.c b/drivers/net/ethernet/qlogic/qed/qed_vf.c
index 6ab3fb008139d..5dda547772c13 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_vf.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_vf.c
@@ -1698,7 +1698,7 @@ static void qed_handle_bulletin_change(struct qed_hwfn *hwfn)
ops->ports_update(cookie, vxlan_port, geneve_port);
/* Always update link configuration according to bulletin */
- qed_link_update(hwfn);
+ qed_link_update(hwfn, NULL);
}
void qed_iov_vf_task(struct work_struct *work)
--
2.20.1
From: Hans de Goede <[email protected]>
[ Upstream commit 2153bbc12f77fb2203276befc0f0dddbfb023bb1 ]
According to the datasheet the update bit must be set if the on-time-div
or the base-unit changes.
Now that we properly order device resume on Cherry Trail so that the GFX0
_PS0 method no longer exits with an error, we end up with a sequence of
events where we are writing the same values twice in a row.
First the _PS0 method restores the duty cycle of 0% the GPU driver set
on suspend and then the GPU driver first updates just the enabled bit in
the pwm_state from 0 to 1, causing us to write the same values again,
before restoring the pre-suspend duty-cycle in a separate pwm_apply call.
When writing the update bit the second time, without changing any of
the values the update bit clears immediately / instantly, instead of
staying 1 for a while as usual. After this the next setting of the update
bit seems to be ignored, causing the restoring of the pre-suspend
duty-cycle to not get applied. This makes the backlight come up with
a 0% dutycycle after suspend/resume.
Any further brightness changes after this do work.
This commit moves the setting of the update bit into pwm_lpss_prepare()
and only sets the bit if we have actually changed any of the values.
This avoids the setting of the update bit the second time we configure
the PWM to 0% dutycycle, this fixes the backlight coming up with 0%
duty-cycle after a suspend/resume.
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pwm/pwm-lpss.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/pwm/pwm-lpss.c b/drivers/pwm/pwm-lpss.c
index 4721a264bac25..1e69c1c9ec096 100644
--- a/drivers/pwm/pwm-lpss.c
+++ b/drivers/pwm/pwm-lpss.c
@@ -97,7 +97,7 @@ static void pwm_lpss_prepare(struct pwm_lpss_chip *lpwm, struct pwm_device *pwm,
unsigned long long on_time_div;
unsigned long c = lpwm->info->clk_rate, base_unit_range;
unsigned long long base_unit, freq = NSEC_PER_SEC;
- u32 ctrl;
+ u32 orig_ctrl, ctrl;
do_div(freq, period_ns);
@@ -114,13 +114,17 @@ static void pwm_lpss_prepare(struct pwm_lpss_chip *lpwm, struct pwm_device *pwm,
do_div(on_time_div, period_ns);
on_time_div = 255ULL - on_time_div;
- ctrl = pwm_lpss_read(pwm);
+ orig_ctrl = ctrl = pwm_lpss_read(pwm);
ctrl &= ~PWM_ON_TIME_DIV_MASK;
ctrl &= ~(base_unit_range << PWM_BASE_UNIT_SHIFT);
base_unit &= base_unit_range;
ctrl |= (u32) base_unit << PWM_BASE_UNIT_SHIFT;
ctrl |= on_time_div;
- pwm_lpss_write(pwm, ctrl);
+
+ if (orig_ctrl != ctrl) {
+ pwm_lpss_write(pwm, ctrl);
+ pwm_lpss_write(pwm, ctrl | PWM_SW_UPDATE);
+ }
}
static inline void pwm_lpss_cond_enable(struct pwm_device *pwm, bool cond)
@@ -144,7 +148,6 @@ static int pwm_lpss_apply(struct pwm_chip *chip, struct pwm_device *pwm,
return ret;
}
pwm_lpss_prepare(lpwm, pwm, state->duty_cycle, state->period);
- pwm_lpss_write(pwm, pwm_lpss_read(pwm) | PWM_SW_UPDATE);
pwm_lpss_cond_enable(pwm, lpwm->info->bypass == false);
ret = pwm_lpss_wait_for_update(pwm);
if (ret) {
@@ -157,7 +160,6 @@ static int pwm_lpss_apply(struct pwm_chip *chip, struct pwm_device *pwm,
if (ret)
return ret;
pwm_lpss_prepare(lpwm, pwm, state->duty_cycle, state->period);
- pwm_lpss_write(pwm, pwm_lpss_read(pwm) | PWM_SW_UPDATE);
return pwm_lpss_wait_for_update(pwm);
}
} else if (pwm_is_enabled(pwm)) {
--
2.20.1
From: Angelo Dureghello <[email protected]>
[ Upstream commit 381fdd62c38344a771aed06adaf14aae65c47454 ]
This patch fixes command_line array zero-terminated
one byte over the end of the array, causing boot to hang.
Signed-off-by: Angelo Dureghello <[email protected]>
Signed-off-by: Greg Ungerer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/m68k/kernel/uboot.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/m68k/kernel/uboot.c b/arch/m68k/kernel/uboot.c
index b29c3b241e1bb..1070828770645 100644
--- a/arch/m68k/kernel/uboot.c
+++ b/arch/m68k/kernel/uboot.c
@@ -102,5 +102,5 @@ __init void process_uboot_commandline(char *commandp, int size)
}
parse_uboot_commandline(commandp, len);
- commandp[size - 1] = 0;
+ commandp[len - 1] = 0;
}
--
2.20.1
From: Finn Thain <[email protected]>
[ Upstream commit b7ded0e8b0d11b6df1c4e5aa23a26e6629c21985 ]
The core driver, esp_scsi, does not use the ESP_CONFIG2_FENAB bit, so the
chip's Transfer Counter register is only 16 bits wide (not 24). A larger
transfer cannot work and will theoretically result in a failed command
and a "DMA length is zero" error.
Fixes: 3109e5ae0311 ("scsi: zorro_esp: New driver for Amiga Zorro NCR53C9x boards")
Signed-off-by: Finn Thain <[email protected]>
Cc: Michael Schmitz <[email protected]>
Tested-by: Michael Schmitz <[email protected]>
Reviewed-by: Michael Schmitz <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/zorro_esp.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)
diff --git a/drivers/scsi/zorro_esp.c b/drivers/scsi/zorro_esp.c
index bb70882e6b56e..be79127db5946 100644
--- a/drivers/scsi/zorro_esp.c
+++ b/drivers/scsi/zorro_esp.c
@@ -245,7 +245,7 @@ static int fastlane_esp_irq_pending(struct esp *esp)
static u32 zorro_esp_dma_length_limit(struct esp *esp, u32 dma_addr,
u32 dma_len)
{
- return dma_len > 0xFFFFFF ? 0xFFFFFF : dma_len;
+ return dma_len > 0xFFFF ? 0xFFFF : dma_len;
}
static void zorro_esp_reset_dma(struct esp *esp)
@@ -484,7 +484,6 @@ static void zorro_esp_send_blz1230_dma_cmd(struct esp *esp, u32 addr,
scsi_esp_cmd(esp, ESP_CMD_DMA);
zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
- zorro_esp_write8(esp, (esp_count >> 16) & 0xff, ESP_TCHI);
scsi_esp_cmd(esp, cmd);
}
@@ -529,7 +528,6 @@ static void zorro_esp_send_blz1230II_dma_cmd(struct esp *esp, u32 addr,
scsi_esp_cmd(esp, ESP_CMD_DMA);
zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
- zorro_esp_write8(esp, (esp_count >> 16) & 0xff, ESP_TCHI);
scsi_esp_cmd(esp, cmd);
}
@@ -574,7 +572,6 @@ static void zorro_esp_send_blz2060_dma_cmd(struct esp *esp, u32 addr,
scsi_esp_cmd(esp, ESP_CMD_DMA);
zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
- zorro_esp_write8(esp, (esp_count >> 16) & 0xff, ESP_TCHI);
scsi_esp_cmd(esp, cmd);
}
@@ -599,7 +596,6 @@ static void zorro_esp_send_cyber_dma_cmd(struct esp *esp, u32 addr,
zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
- zorro_esp_write8(esp, (esp_count >> 16) & 0xff, ESP_TCHI);
if (write) {
/* DMA receive */
@@ -649,7 +645,6 @@ static void zorro_esp_send_cyberII_dma_cmd(struct esp *esp, u32 addr,
zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
- zorro_esp_write8(esp, (esp_count >> 16) & 0xff, ESP_TCHI);
if (write) {
/* DMA receive */
@@ -691,7 +686,6 @@ static void zorro_esp_send_fastlane_dma_cmd(struct esp *esp, u32 addr,
zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
- zorro_esp_write8(esp, (esp_count >> 16) & 0xff, ESP_TCHI);
if (write) {
/* DMA receive */
--
2.20.1
From: Sean Christopherson <[email protected]>
[ Upstream commit b7031fd40fcc741b0f9b0c04c8d844e445858b84 ]
Reset the vm_{entry,exit}_controls_shadow variables as well as the
segment cache after loading a new VMCS in vmx_switch_vmcs(). The
shadows/cache track VMCS data, i.e. they're stale every time we
switch to a new VMCS regardless of reason.
This fixes a bug where stale control shadows would be consumed after
a nested VMExit due to a failed consistency check.
Suggested-by: Jim Mattson <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: Jim Mattson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/vmx.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 4eda2a9c234a6..8c7554d7f0a80 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -11013,6 +11013,10 @@ static void vmx_switch_vmcs(struct kvm_vcpu *vcpu, struct loaded_vmcs *vmcs)
vmx->loaded_vmcs = vmcs;
vmx_vcpu_load(vcpu, cpu);
put_cpu();
+
+ vm_entry_controls_reset_shadow(vmx);
+ vm_exit_controls_reset_shadow(vmx);
+ vmx_segment_cache_clear(vmx);
}
/*
@@ -12700,7 +12704,6 @@ static int enter_vmx_non_root_mode(struct kvm_vcpu *vcpu, u32 *exit_qual)
vmx->nested.vmcs01_guest_bndcfgs = vmcs_read64(GUEST_BNDCFGS);
vmx_switch_vmcs(vcpu, &vmx->nested.vmcs02);
- vmx_segment_cache_clear(vmx);
if (vmcs12->cpu_based_vm_exec_control & CPU_BASED_USE_TSC_OFFSETING)
vcpu->arch.tsc_offset += vmcs12->tsc_offset;
@@ -13531,9 +13534,6 @@ static void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 exit_reason,
}
vmx_switch_vmcs(vcpu, &vmx->vmcs01);
- vm_entry_controls_reset_shadow(vmx);
- vm_exit_controls_reset_shadow(vmx);
- vmx_segment_cache_clear(vmx);
/* Update any VMCS fields that might have changed while L2 ran */
vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, vmx->msr_autoload.host.nr);
--
2.20.1
From: Luo Jiaxing <[email protected]>
[ Upstream commit 5a54691f874ab29ec82f08bc6936866a3ccdaa91 ]
At directly attached situation, if the user modifies the sysfs interface
of maximum_linkrate and minimum_linkrate to renegotiate the linkrate
between SAS controller and target, the value of both files mentioned
above should have change to user setting after renegotiate is over, but
it remains unchanged.
To fix this bug, maximum_linkrate and minimum_linkrate will be directly
fed back to relevant sas_phy structure.
Signed-off-by: Luo Jiaxing <[email protected]>
Signed-off-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index fd9d82c9033de..e9747379384b2 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -906,6 +906,9 @@ static void hisi_sas_phy_set_linkrate(struct hisi_hba *hisi_hba, int phy_no,
_r.maximum_linkrate = max;
_r.minimum_linkrate = min;
+ sas_phy->phy->maximum_linkrate = max;
+ sas_phy->phy->minimum_linkrate = min;
+
hisi_hba->hw->phy_disable(hisi_hba, phy_no);
msleep(100);
hisi_hba->hw->phy_set_linkrate(hisi_hba, phy_no, &_r);
--
2.20.1
From: Nikolay Borisov <[email protected]>
[ Upstream commit 315bed43fea532650933e7bba316a7601d439edf ]
In btrfs_search_old_slot get_old_root is always used with the assumption
it cannot fail. However, this is not true in rare circumstance it can
fail and return null. This will lead to null point dereference when the
header is read. Fix this by checking the return value and properly
handling NULL by setting ret to -EIO and returning gracefully.
Coverity-id: 1087503
Signed-off-by: Nikolay Borisov <[email protected]>
Reviewed-by: Lu Fengqi <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/ctree.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 9fd383285f0ea..fc764f350f05a 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -3031,6 +3031,10 @@ int btrfs_search_old_slot(struct btrfs_root *root, const struct btrfs_key *key,
again:
b = get_old_root(root, time_seq);
+ if (!b) {
+ ret = -EIO;
+ goto done;
+ }
level = btrfs_header_level(b);
p->locks[level] = BTRFS_READ_LOCK;
--
2.20.1
From: "Gustavo A. R. Silva" <[email protected]>
[ Upstream commit 5d25ff7a544889bc4b749fda31778d6a18dddbcb ]
Add missing break statement in order to prevent the code from falling
through to case TEST_UNIT_READY.
Addresses-Coverity-ID: 1357338 ("Missing break in switch")
Suggested-by: Martin K. Petersen <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ips.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index bd6ac6b5980a1..fe587ef1741d4 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -3485,6 +3485,7 @@ ips_send_cmd(ips_ha_t * ha, ips_scb_t * scb)
case START_STOP:
scb->scsi_cmd->result = DID_OK << 16;
+ break;
case TEST_UNIT_READY:
case INQUIRY:
--
2.20.1
From: Bart Van Assche <[email protected]>
[ Upstream commit 1216e9ef18b84f4fb5934792368fb01eb3540520 ]
Building with W=1 enables the compiler warning -Wimplicit-fallthrough=3. That
option does not recognize the fall-through comment in the fcloop driver. Add
a fall-through comment that is recognized for -Wimplicit-fallthrough=3. This
patch avoids that the compiler reports the following warning when building
with W=1:
drivers/nvme/target/fcloop.c:647:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (op == NVMET_FCOP_READDATA)
^
Signed-off-by: Bart Van Assche <[email protected]>
Reviewed-by: James Smart <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/target/fcloop.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/nvme/target/fcloop.c b/drivers/nvme/target/fcloop.c
index 5251689a1d9ac..291f4121f516a 100644
--- a/drivers/nvme/target/fcloop.c
+++ b/drivers/nvme/target/fcloop.c
@@ -648,6 +648,7 @@ fcloop_fcp_op(struct nvmet_fc_target_port *tgtport,
break;
/* Fall-Thru to RSP handling */
+ /* FALLTHRU */
case NVMET_FCOP_RSP:
if (fcpreq) {
--
2.20.1
From: Honghui Zhang <[email protected]>
[ Upstream commit a7f172ab6a8e755e60311f27512034b0441ef421 ]
commit 101c92dc80c8 ("PCI: mediatek: Set up vendor ID and class
type for MT7622") erroneously set the class type for MT7622 to
PCI_CLASS_BRIDGE_HOST.
The PCIe controller of MT7622 integrates a Root Port that has type 1
configuration space header and related bridge windows.
The HW default value of this bridge's class type is invalid.
Fix its class type and set it to PCI_CLASS_BRIDGE_PCI to
match the hardware implementation.
Fixes: 101c92dc80c8 ("PCI: mediatek: Set up vendor ID and class type for MT7622")
Signed-off-by: Honghui Zhang <[email protected]>
[[email protected]: reworked the commit log]
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Acked-by: Ryder Lee <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/pcie-mediatek.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
index c5ff6ca65eab2..abedf8ec11bba 100644
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -432,7 +432,7 @@ static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
val = PCI_VENDOR_ID_MEDIATEK;
writew(val, port->base + PCIE_CONF_VEND_ID);
- val = PCI_CLASS_BRIDGE_HOST;
+ val = PCI_CLASS_BRIDGE_PCI;
writew(val, port->base + PCIE_CONF_CLASS_ID);
}
--
2.20.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit 362b5da3dfceada6e74ecdd7af3991bbe42c0c0f ]
Clang warns when an enumerated type is implicitly converted to another.
drivers/scsi/isci/request.c:3476:13: warning: implicit conversion from
enumeration type 'enum sci_task_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
status = sci_controller_start_task(ihost,
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/isci/host.c:2744:10: warning: implicit conversion from
enumeration type 'enum sci_status' to different enumeration type 'enum
sci_task_status' [-Wenum-conversion]
return SCI_SUCCESS;
~~~~~~ ^~~~~~~~~~~
drivers/scsi/isci/host.c:2753:9: warning: implicit conversion from
enumeration type 'enum sci_status' to different enumeration type 'enum
sci_task_status' [-Wenum-conversion]
return status;
~~~~~~ ^~~~~~
Avoid all of these implicit conversion by just making
sci_controller_start_task use sci_status. This silences
Clang and has no functional change since sci_task_status
has all of its values mapped to something in sci_status.
Link: https://github.com/ClangBuiltLinux/linux/issues/153
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/isci/host.c | 8 ++++----
drivers/scsi/isci/host.h | 2 +-
drivers/scsi/isci/task.c | 4 ++--
3 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index 1ee3868ade079..7b5deae68d33b 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -2717,9 +2717,9 @@ enum sci_status sci_controller_continue_io(struct isci_request *ireq)
* the task management request.
* @task_request: the handle to the task request object to start.
*/
-enum sci_task_status sci_controller_start_task(struct isci_host *ihost,
- struct isci_remote_device *idev,
- struct isci_request *ireq)
+enum sci_status sci_controller_start_task(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq)
{
enum sci_status status;
@@ -2728,7 +2728,7 @@ enum sci_task_status sci_controller_start_task(struct isci_host *ihost,
"%s: SCIC Controller starting task from invalid "
"state\n",
__func__);
- return SCI_TASK_FAILURE_INVALID_STATE;
+ return SCI_FAILURE_INVALID_STATE;
}
status = sci_remote_device_start_task(ihost, idev, ireq);
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index b3539928073c6..6bc3f022630a2 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -489,7 +489,7 @@ enum sci_status sci_controller_start_io(
struct isci_remote_device *idev,
struct isci_request *ireq);
-enum sci_task_status sci_controller_start_task(
+enum sci_status sci_controller_start_task(
struct isci_host *ihost,
struct isci_remote_device *idev,
struct isci_request *ireq);
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index 6dcaed0c1fc8c..fb6eba331ac6e 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -258,7 +258,7 @@ static int isci_task_execute_tmf(struct isci_host *ihost,
struct isci_tmf *tmf, unsigned long timeout_ms)
{
DECLARE_COMPLETION_ONSTACK(completion);
- enum sci_task_status status = SCI_TASK_FAILURE;
+ enum sci_status status = SCI_FAILURE;
struct isci_request *ireq;
int ret = TMF_RESP_FUNC_FAILED;
unsigned long flags;
@@ -301,7 +301,7 @@ static int isci_task_execute_tmf(struct isci_host *ihost,
/* start the TMF io. */
status = sci_controller_start_task(ihost, idev, ireq);
- if (status != SCI_TASK_SUCCESS) {
+ if (status != SCI_SUCCESS) {
dev_dbg(&ihost->pdev->dev,
"%s: start_io failed - status = 0x%x, request = %p\n",
__func__,
--
2.20.1
From: Lorenzo Bianconi <[email protected]>
[ Upstream commit 4df942733fd26d9378a4a00619be348c771e0190 ]
Fix restore value configured in MT_BBP(IBI, 9) register in
mt76x0_phy_recalibrate_after_assoc routine.
Fixes: 10de7a8b4ab9 ("mt76x0: phy files")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt76x0/phy.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
index 14e8c575f6c3e..924c761f34fd9 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
@@ -793,9 +793,8 @@ void mt76x0_phy_recalibrate_after_assoc(struct mt76x0_dev *dev)
mt76_wr(dev, MT_TX_ALC_CFG_0, 0);
usleep_range(500, 700);
- reg_val = mt76_rr(dev, 0x2124);
- reg_val &= 0xffffff7e;
- mt76_wr(dev, 0x2124, reg_val);
+ reg_val = mt76_rr(dev, MT_BBP(IBI, 9));
+ mt76_wr(dev, MT_BBP(IBI, 9), 0xffffff7e);
mt76x0_mcu_calibrate(dev, MCU_CAL_RXDCOC, 0);
@@ -806,7 +805,7 @@ void mt76x0_phy_recalibrate_after_assoc(struct mt76x0_dev *dev)
mt76x0_mcu_calibrate(dev, MCU_CAL_RXIQ, is_5ghz);
mt76x0_mcu_calibrate(dev, MCU_CAL_RX_GROUP_DELAY, is_5ghz);
- mt76_wr(dev, 0x2124, reg_val);
+ mt76_wr(dev, MT_BBP(IBI, 9), reg_val);
mt76_wr(dev, MT_TX_ALC_CFG_0, tx_alc);
msleep(100);
--
2.20.1
From: Joel Stanley <[email protected]>
[ Upstream commit e8e132e6885962582784b6fa16a80d07ea739c0f ]
This will avoid auto-vectorisation when building with higher
optimisation levels.
We don't know if the machine can support VSX and even if it's present
it's probably not going to be enabled at this point in boot.
These flag were both added prior to GCC 4.6 which is the minimum
compiler version supported by upstream, thanks to Segher for the
details.
Signed-off-by: Joel Stanley <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/boot/Makefile | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 25e3184f11f78..7d5ddf53750ce 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -32,8 +32,8 @@ else
endif
BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
- -fno-strict-aliasing -Os -msoft-float -pipe \
- -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
+ -fno-strict-aliasing -Os -msoft-float -mno-altivec -mno-vsx \
+ -pipe -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
-D$(compress-y)
ifdef CONFIG_PPC64_BOOT_WRAPPER
--
2.20.1
From: "Gustavo A. R. Silva" <[email protected]>
[ Upstream commit 4fe81669df50889ff1072c030c59df5f1fa6534e ]
There is a potential execution path in which variable *ret* is checked
in an IF statement, and then its value is used to report an error at
line 659 without being properly initialized previously:
659 if (ret)
660 dev_err(priv->dev, "Failed to write to 0x%x (%d)\n", reg, ret);
Fix this by initializing variable *ret* to 0 in order to
avoid unpredictable or unintended results.
Addresses-Coverity-ID: 1471969 ("Uninitialized scalar variable")
Fixes: 218d72a77b0b ("pinctrl: madera: Add driver for Cirrus Logic Madera codecs")
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Acked-by: Charles Keepax <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/cirrus/pinctrl-madera-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/cirrus/pinctrl-madera-core.c b/drivers/pinctrl/cirrus/pinctrl-madera-core.c
index c4f4d904e4a61..618e04407ac85 100644
--- a/drivers/pinctrl/cirrus/pinctrl-madera-core.c
+++ b/drivers/pinctrl/cirrus/pinctrl-madera-core.c
@@ -608,7 +608,7 @@ static int madera_mux_set_mux(struct pinctrl_dev *pctldev,
unsigned int n_chip_groups = priv->chip->n_pin_groups;
const char *func_name = madera_mux_funcs[selector].name;
unsigned int reg;
- int i, ret;
+ int i, ret = 0;
dev_dbg(priv->dev, "%s selecting %u (%s) for group %u (%s)\n",
__func__, selector, func_name, group,
--
2.20.1
From: Sergey Senozhatsky <[email protected]>
[ Upstream commit 3ac37a93fa9217e576bebfd4ba3e80edaaeb2289 ]
Prior to commit 5c2992ee7fd8a29 ("printk: remove console flushing special
cases for partial buffered lines") we would do console_cont_flush()
for each pr_cont() to print cont fragments, so console_unlock() would
actually print data:
pr_cont();
console_lock();
console_unlock()
console_cont_flush(); // print cont fragment
...
pr_cont();
console_lock();
console_unlock()
console_cont_flush(); // print cont fragment
We don't do console_cont_flush() anymore, so when we do pr_cont()
console_unlock() does nothing (unless we flushed the cont buffer):
pr_cont();
console_lock();
console_unlock(); // noop
...
pr_cont();
console_lock();
console_unlock(); // noop
...
pr_cont();
cont_flush();
console_lock();
console_unlock(); // print data
We also wakeup klogd purposelessly for pr_cont() output - un-flushed
cont buffer is not stored in log_buf; there is nothing to pull.
Thus we can console_lock()/console_unlock()/wake_up_klogd() only when
we know that we log_store()-ed a message and there is something to
print to the consoles/syslog.
Link: http://lkml.kernel.org/r/[email protected]
To: Steven Rostedt <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: LKML <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Signed-off-by: Sergey Senozhatsky <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/printk/printk.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index d0d03223b45b1..9ee6016a19fc8 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -1894,8 +1894,9 @@ asmlinkage int vprintk_emit(int facility, int level,
const char *fmt, va_list args)
{
int printed_len;
- bool in_sched = false;
+ bool in_sched = false, pending_output;
unsigned long flags;
+ u64 curr_log_seq;
if (level == LOGLEVEL_SCHED) {
level = LOGLEVEL_DEFAULT;
@@ -1907,11 +1908,13 @@ asmlinkage int vprintk_emit(int facility, int level,
/* This stops the holder of console_sem just where we want him */
logbuf_lock_irqsave(flags);
+ curr_log_seq = log_next_seq;
printed_len = vprintk_store(facility, level, dict, dictlen, fmt, args);
+ pending_output = (curr_log_seq != log_next_seq);
logbuf_unlock_irqrestore(flags);
/* If called from the scheduler, we can not call up(). */
- if (!in_sched) {
+ if (!in_sched && pending_output) {
/*
* Disable preemption to avoid being preempted while holding
* console_sem which would prevent anyone from printing to
@@ -1928,7 +1931,8 @@ asmlinkage int vprintk_emit(int facility, int level,
preempt_enable();
}
- wake_up_klogd();
+ if (pending_output)
+ wake_up_klogd();
return printed_len;
}
EXPORT_SYMBOL(vprintk_emit);
--
2.20.1
From: Devesh Sharma <[email protected]>
[ Upstream commit 4c01f2e3a906a0d2d798be5751c331cf501bc129 ]
Reports affiliated async event on the qp-async event channel instead of
global event channel.
Signed-off-by: Devesh Sharma <[email protected]>
Signed-off-by: Selvin Xavier <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/bnxt_re/main.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/infiniband/hw/bnxt_re/main.c b/drivers/infiniband/hw/bnxt_re/main.c
index 22bd9784fa2ea..7ffad368c5fa1 100644
--- a/drivers/infiniband/hw/bnxt_re/main.c
+++ b/drivers/infiniband/hw/bnxt_re/main.c
@@ -989,12 +989,17 @@ static void bnxt_re_dispatch_event(struct ib_device *ibdev, struct ib_qp *qp,
struct ib_event ib_event;
ib_event.device = ibdev;
- if (qp)
+ if (qp) {
ib_event.element.qp = qp;
- else
+ ib_event.event = event;
+ if (qp->event_handler)
+ qp->event_handler(&ib_event, qp->qp_context);
+
+ } else {
ib_event.element.port_num = port_num;
- ib_event.event = event;
- ib_dispatch_event(&ib_event);
+ ib_event.event = event;
+ ib_dispatch_event(&ib_event);
+ }
}
#define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_IVLAN 0x02
--
2.20.1
From: Selvin Xavier <[email protected]>
[ Upstream commit eae4ad1b0c9a77ef0cbac212d58d46976eaacfc1 ]
This is reported by smatch check. rcfw->creq_bar_reg_iomem is accessed in
bnxt_qplib_rcfw_stop_irq and this variable check afterwards doesn't make
sense. Also, rcfw->creq_bar_reg_iomem will never be NULL. So Removing
this check.
Reported-by: Dan Carpenter <[email protected]>
Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes")
Signed-off-by: Selvin Xavier <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/bnxt_re/qplib_rcfw.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
index 6637df77d2365..8b3b5fdc19bbb 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
+++ b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
@@ -614,13 +614,8 @@ void bnxt_qplib_disable_rcfw_channel(struct bnxt_qplib_rcfw *rcfw)
bnxt_qplib_rcfw_stop_irq(rcfw, true);
- if (rcfw->cmdq_bar_reg_iomem)
- iounmap(rcfw->cmdq_bar_reg_iomem);
- rcfw->cmdq_bar_reg_iomem = NULL;
-
- if (rcfw->creq_bar_reg_iomem)
- iounmap(rcfw->creq_bar_reg_iomem);
- rcfw->creq_bar_reg_iomem = NULL;
+ iounmap(rcfw->cmdq_bar_reg_iomem);
+ iounmap(rcfw->creq_bar_reg_iomem);
indx = find_first_bit(rcfw->cmdq_bitmap, rcfw->bmap_size);
if (indx != rcfw->bmap_size)
@@ -629,6 +624,8 @@ void bnxt_qplib_disable_rcfw_channel(struct bnxt_qplib_rcfw *rcfw)
kfree(rcfw->cmdq_bitmap);
rcfw->bmap_size = 0;
+ rcfw->cmdq_bar_reg_iomem = NULL;
+ rcfw->creq_bar_reg_iomem = NULL;
rcfw->aeq_handler = NULL;
rcfw->vector = 0;
}
@@ -714,6 +711,8 @@ int bnxt_qplib_enable_rcfw_channel(struct pci_dev *pdev,
dev_err(&rcfw->pdev->dev,
"QPLIB: CREQ BAR region %d mapping failed",
rcfw->creq_bar_reg);
+ iounmap(rcfw->cmdq_bar_reg_iomem);
+ rcfw->cmdq_bar_reg_iomem = NULL;
return -ENOMEM;
}
rcfw->creq_qp_event_processed = 0;
--
2.20.1
From: Ivan Khoronzhuk <[email protected]>
[ Upstream commit 5da1948969bc1991920987ce4361ea56046e5a98 ]
Whenever kernel or user decides to call rx mode update, it clears
every multicast entry from forwarding table and in some time adds
it again. This time can be enough to drop incoming multicast packets.
That's why clear only staled multicast entries and update or add new
one afterwards.
Signed-off-by: Ivan Khoronzhuk <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ti/cpsw.c | 46 +++++++++++++++++++++-------------
1 file changed, 28 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 1afed85550c0a..ef79d2b6070b9 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -570,7 +570,7 @@ static inline int cpsw_get_slave_port(u32 slave_num)
return slave_num + 1;
}
-static void cpsw_add_mcast(struct cpsw_priv *priv, u8 *addr)
+static void cpsw_add_mcast(struct cpsw_priv *priv, const u8 *addr)
{
struct cpsw_common *cpsw = priv->cpsw;
@@ -662,16 +662,35 @@ static void cpsw_set_promiscious(struct net_device *ndev, bool enable)
}
}
-static void cpsw_ndo_set_rx_mode(struct net_device *ndev)
+static int cpsw_add_mc_addr(struct net_device *ndev, const u8 *addr)
+{
+ struct cpsw_priv *priv = netdev_priv(ndev);
+
+ cpsw_add_mcast(priv, addr);
+ return 0;
+}
+
+static int cpsw_del_mc_addr(struct net_device *ndev, const u8 *addr)
{
struct cpsw_priv *priv = netdev_priv(ndev);
struct cpsw_common *cpsw = priv->cpsw;
- int vid;
+ int vid, flags;
- if (cpsw->data.dual_emac)
+ if (cpsw->data.dual_emac) {
vid = cpsw->slaves[priv->emac_port].port_vlan;
- else
- vid = cpsw->data.default_vlan;
+ flags = ALE_VLAN;
+ } else {
+ vid = 0;
+ flags = 0;
+ }
+
+ cpsw_ale_del_mcast(cpsw->ale, addr, 0, flags, vid);
+ return 0;
+}
+
+static void cpsw_ndo_set_rx_mode(struct net_device *ndev)
+{
+ struct cpsw_common *cpsw = ndev_to_cpsw(ndev);
if (ndev->flags & IFF_PROMISC) {
/* Enable promiscuous mode */
@@ -684,19 +703,9 @@ static void cpsw_ndo_set_rx_mode(struct net_device *ndev)
}
/* Restore allmulti on vlans if necessary */
- cpsw_ale_set_allmulti(cpsw->ale, priv->ndev->flags & IFF_ALLMULTI);
-
- /* Clear all mcast from ALE */
- cpsw_ale_flush_multicast(cpsw->ale, ALE_ALL_PORTS, vid);
+ cpsw_ale_set_allmulti(cpsw->ale, ndev->flags & IFF_ALLMULTI);
- if (!netdev_mc_empty(ndev)) {
- struct netdev_hw_addr *ha;
-
- /* program multicast address list into ALE register */
- netdev_for_each_mc_addr(ha, ndev) {
- cpsw_add_mcast(priv, ha->addr);
- }
- }
+ __dev_mc_sync(ndev, cpsw_add_mc_addr, cpsw_del_mc_addr);
}
static void cpsw_intr_enable(struct cpsw_common *cpsw)
@@ -1956,6 +1965,7 @@ static int cpsw_ndo_stop(struct net_device *ndev)
struct cpsw_common *cpsw = priv->cpsw;
cpsw_info(priv, ifdown, "shutting down cpsw device\n");
+ __dev_mc_unsync(priv->ndev, cpsw_del_mc_addr);
netif_tx_stop_all_queues(priv->ndev);
netif_carrier_off(priv->ndev);
--
2.20.1
From: Andreas Gruenbacher <[email protected]>
[ Upstream commit ec23df2b0cf3e1620f5db77972b7fb735f267eff ]
Reservations in gfs can span multiple gfs2_bitmaps (but they won't span
multiple resource groups). When removing a reservation, we want to
clear the GBF_FULL flags of all involved gfs2_bitmaps, not just that of
the first bitmap.
Signed-off-by: Andreas Gruenbacher <[email protected]>
Signed-off-by: Bob Peterson <[email protected]>
Reviewed-by: Steven Whitehouse <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/gfs2/rgrp.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index 449d0cb45a845..e37b40ec3f761 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -642,7 +642,10 @@ static void __rs_deltree(struct gfs2_blkreserv *rs)
RB_CLEAR_NODE(&rs->rs_node);
if (rs->rs_free) {
- struct gfs2_bitmap *bi = rbm_bi(&rs->rs_rbm);
+ u64 last_block = gfs2_rbm_to_block(&rs->rs_rbm) +
+ rs->rs_free - 1;
+ struct gfs2_rbm last_rbm = { .rgd = rs->rs_rbm.rgd, };
+ struct gfs2_bitmap *start, *last;
/* return reserved blocks to the rgrp */
BUG_ON(rs->rs_rbm.rgd->rd_reserved < rs->rs_free);
@@ -653,7 +656,13 @@ static void __rs_deltree(struct gfs2_blkreserv *rs)
it will force the number to be recalculated later. */
rgd->rd_extfail_pt += rs->rs_free;
rs->rs_free = 0;
- clear_bit(GBF_FULL, &bi->bi_flags);
+ if (gfs2_rbm_from_block(&last_rbm, last_block))
+ return;
+ start = rbm_bi(&rs->rs_rbm);
+ last = rbm_bi(&last_rbm);
+ do
+ clear_bit(GBF_FULL, &start->bi_flags);
+ while (start++ != last);
}
}
--
2.20.1
From: Xiang Chen <[email protected]>
[ Upstream commit 3e178f3ecfcf91a258e832b0f0843a4cfd9059ac ]
If an SSP/SMP IO times out, it may be actually in reality be
simultaneously processing completion of the slot in
slot_complete_vx_hw().
Then if the slot is freed in slot_complete_vx_hw() (this IPTT is freed
and it may be re-used by other slot), and we may abort the wrong slot in
hisi_sas_abort_task().
So to solve the issue, free the slot after the check of
SAS_TASK_STATE_ABORTED in slot_complete_vx_hw().
Signed-off-by: Xiang Chen <[email protected]>
Signed-off-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 2 +-
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 1c4ea58da1ae1..c4774d63d5d04 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -2481,7 +2481,6 @@ slot_complete_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot)
}
out:
- hisi_sas_slot_task_free(hisi_hba, task, slot);
sts = ts->stat;
spin_lock_irqsave(&task->task_state_lock, flags);
if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
@@ -2491,6 +2490,7 @@ slot_complete_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot)
}
task->task_state_flags |= SAS_TASK_STATE_DONE;
spin_unlock_irqrestore(&task->task_state_lock, flags);
+ hisi_sas_slot_task_free(hisi_hba, task, slot);
if (!is_internal && (task->task_proto != SAS_PROTOCOL_SMP)) {
spin_lock_irqsave(&device->done_lock, flags);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 3922b17e2ea39..fb2a5969181b5 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -1749,7 +1749,6 @@ slot_complete_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot)
}
out:
- hisi_sas_slot_task_free(hisi_hba, task, slot);
sts = ts->stat;
spin_lock_irqsave(&task->task_state_lock, flags);
if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
@@ -1759,6 +1758,7 @@ slot_complete_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot)
}
task->task_state_flags |= SAS_TASK_STATE_DONE;
spin_unlock_irqrestore(&task->task_state_lock, flags);
+ hisi_sas_slot_task_free(hisi_hba, task, slot);
if (!is_internal && (task->task_proto != SAS_PROTOCOL_SMP)) {
spin_lock_irqsave(&device->done_lock, flags);
--
2.20.1
From: Julien Folly <[email protected]>
[ Upstream commit 6eaafbb6998e999467cf78a76e155ee00e372b14 ]
IAD Register is yet readable trough the "iad" sys file.
A write to the "iad" sys file enables or disables the current
measurement, but it was not possible to get the measured value by
reading it.
Fix: %u in snprintf for unsigned values (vdd and vad)
Fix: Avoid possibles overflows (Usage of the 'count' variables)
Signed-off-by: Julien Folly <[email protected]>
Acked-by: Evgeniy Polyakov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/w1/slaves/w1_ds2438.c | 66 +++++++++++++++++++++++++++--------
1 file changed, 52 insertions(+), 14 deletions(-)
diff --git a/drivers/w1/slaves/w1_ds2438.c b/drivers/w1/slaves/w1_ds2438.c
index bf641a191d077..7c4e33dbee4d5 100644
--- a/drivers/w1/slaves/w1_ds2438.c
+++ b/drivers/w1/slaves/w1_ds2438.c
@@ -186,8 +186,8 @@ static int w1_ds2438_change_config_bit(struct w1_slave *sl, u8 mask, u8 value)
return -1;
}
-static uint16_t w1_ds2438_get_voltage(struct w1_slave *sl,
- int adc_input, uint16_t *voltage)
+static int w1_ds2438_get_voltage(struct w1_slave *sl,
+ int adc_input, uint16_t *voltage)
{
unsigned int retries = W1_DS2438_RETRIES;
u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/];
@@ -235,6 +235,25 @@ static uint16_t w1_ds2438_get_voltage(struct w1_slave *sl,
return ret;
}
+static int w1_ds2438_get_current(struct w1_slave *sl, int16_t *voltage)
+{
+ u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/];
+ int ret;
+
+ mutex_lock(&sl->master->bus_mutex);
+
+ if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) {
+ /* The voltage measured across current sense resistor RSENS. */
+ *voltage = (((int16_t) w1_buf[DS2438_CURRENT_MSB]) << 8) | ((int16_t) w1_buf[DS2438_CURRENT_LSB]);
+ ret = 0;
+ } else
+ ret = -1;
+
+ mutex_unlock(&sl->master->bus_mutex);
+
+ return ret;
+}
+
static ssize_t iad_write(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr, char *buf,
loff_t off, size_t count)
@@ -257,6 +276,27 @@ static ssize_t iad_write(struct file *filp, struct kobject *kobj,
return ret;
}
+static ssize_t iad_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *buf,
+ loff_t off, size_t count)
+{
+ struct w1_slave *sl = kobj_to_w1_slave(kobj);
+ int ret;
+ int16_t voltage;
+
+ if (off != 0)
+ return 0;
+ if (!buf)
+ return -EINVAL;
+
+ if (w1_ds2438_get_current(sl, &voltage) == 0) {
+ ret = snprintf(buf, count, "%i\n", voltage);
+ } else
+ ret = -EIO;
+
+ return ret;
+}
+
static ssize_t page0_read(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr, char *buf,
loff_t off, size_t count)
@@ -272,9 +312,13 @@ static ssize_t page0_read(struct file *filp, struct kobject *kobj,
mutex_lock(&sl->master->bus_mutex);
+ /* Read no more than page0 size */
+ if (count > DS2438_PAGE_SIZE)
+ count = DS2438_PAGE_SIZE;
+
if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) {
- memcpy(buf, &w1_buf, DS2438_PAGE_SIZE);
- ret = DS2438_PAGE_SIZE;
+ memcpy(buf, &w1_buf, count);
+ ret = count;
} else
ret = -EIO;
@@ -289,7 +333,6 @@ static ssize_t temperature_read(struct file *filp, struct kobject *kobj,
{
struct w1_slave *sl = kobj_to_w1_slave(kobj);
int ret;
- ssize_t c = PAGE_SIZE;
int16_t temp;
if (off != 0)
@@ -298,8 +341,7 @@ static ssize_t temperature_read(struct file *filp, struct kobject *kobj,
return -EINVAL;
if (w1_ds2438_get_temperature(sl, &temp) == 0) {
- c -= snprintf(buf + PAGE_SIZE - c, c, "%d\n", temp);
- ret = PAGE_SIZE - c;
+ ret = snprintf(buf, count, "%i\n", temp);
} else
ret = -EIO;
@@ -312,7 +354,6 @@ static ssize_t vad_read(struct file *filp, struct kobject *kobj,
{
struct w1_slave *sl = kobj_to_w1_slave(kobj);
int ret;
- ssize_t c = PAGE_SIZE;
uint16_t voltage;
if (off != 0)
@@ -321,8 +362,7 @@ static ssize_t vad_read(struct file *filp, struct kobject *kobj,
return -EINVAL;
if (w1_ds2438_get_voltage(sl, DS2438_ADC_INPUT_VAD, &voltage) == 0) {
- c -= snprintf(buf + PAGE_SIZE - c, c, "%d\n", voltage);
- ret = PAGE_SIZE - c;
+ ret = snprintf(buf, count, "%u\n", voltage);
} else
ret = -EIO;
@@ -335,7 +375,6 @@ static ssize_t vdd_read(struct file *filp, struct kobject *kobj,
{
struct w1_slave *sl = kobj_to_w1_slave(kobj);
int ret;
- ssize_t c = PAGE_SIZE;
uint16_t voltage;
if (off != 0)
@@ -344,15 +383,14 @@ static ssize_t vdd_read(struct file *filp, struct kobject *kobj,
return -EINVAL;
if (w1_ds2438_get_voltage(sl, DS2438_ADC_INPUT_VDD, &voltage) == 0) {
- c -= snprintf(buf + PAGE_SIZE - c, c, "%d\n", voltage);
- ret = PAGE_SIZE - c;
+ ret = snprintf(buf, count, "%u\n", voltage);
} else
ret = -EIO;
return ret;
}
-static BIN_ATTR(iad, S_IRUGO | S_IWUSR | S_IWGRP, NULL, iad_write, 1);
+static BIN_ATTR(iad, S_IRUGO | S_IWUSR | S_IWGRP, iad_read, iad_write, 0);
static BIN_ATTR_RO(page0, DS2438_PAGE_SIZE);
static BIN_ATTR_RO(temperature, 0/* real length varies */);
static BIN_ATTR_RO(vad, 0/* real length varies */);
--
2.20.1
From: Duncan Laurie <[email protected]>
[ Upstream commit 655603de68469adaff16842ac17a5aec9c9ce89b ]
The sysfs handler should return the number of bytes consumed, which in the
case of a successful write is the entire buffer. Also fix a bug where
param.data_len was being set to (count - (2 * sizeof(u32))) instead of just
(count - sizeof(u32)). The latter is correct because we skip over the
leading u32 which is our param.type, but we were also incorrectly
subtracting sizeof(u32) on the line where we were actually setting
param.data_len:
param.data_len = count - sizeof(u32);
This meant that for our example event.kernel_software_watchdog with total
length 10 bytes, param.data_len was just 2 prior to this change.
To test, successfully append an event to the log with gsmi sysfs.
This sample event is for a "Kernel Software Watchdog"
> xxd -g 1 event.kernel_software_watchdog
0000000: 01 00 00 00 ad de 06 00 00 00
> cat event.kernel_software_watchdog > /sys/firmware/gsmi/append_to_eventlog
> mosys eventlog list | tail -1
14 | 2012-06-25 10:14:14 | Kernl Event | Software Watchdog
Signed-off-by: Duncan Laurie <[email protected]>
Reviewed-by: Vadim Bendebury <[email protected]>
Reviewed-by: Stefan Reinauer <[email protected]>
Signed-off-by: Furquan Shaikh <[email protected]>
Tested-by: Furquan Shaikh <[email protected]>
Reviewed-by: Aaron Durbin <[email protected]>
Reviewed-by: Justin TerAvest <[email protected]>
[zwisler: updated changelog for 2nd bug fix and upstream]
Signed-off-by: Ross Zwisler <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/firmware/google/gsmi.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/firmware/google/gsmi.c b/drivers/firmware/google/gsmi.c
index c8f169bf2e27d..62337be07afcb 100644
--- a/drivers/firmware/google/gsmi.c
+++ b/drivers/firmware/google/gsmi.c
@@ -480,11 +480,10 @@ static ssize_t eventlog_write(struct file *filp, struct kobject *kobj,
if (count < sizeof(u32))
return -EINVAL;
param.type = *(u32 *)buf;
- count -= sizeof(u32);
buf += sizeof(u32);
/* The remaining buffer is the data payload */
- if (count > gsmi_dev.data_buf->length)
+ if ((count - sizeof(u32)) > gsmi_dev.data_buf->length)
return -EINVAL;
param.data_len = count - sizeof(u32);
@@ -504,7 +503,7 @@ static ssize_t eventlog_write(struct file *filp, struct kobject *kobj,
spin_unlock_irqrestore(&gsmi_dev.lock, flags);
- return rc;
+ return (rc == 0) ? count : rc;
}
--
2.20.1
From: Su Yue <[email protected]>
[ Upstream commit 28c4a3e21ad030d7571ee9b1b246a5cbfd886627 ]
Since commit 8b62f87bad9c ("Btrfs: rework outstanding_extents"),
manual operations of outstanding_extent in btrfs_inode are replaced by
btrfs_mod_outstanding_extents().
The one in cluster_pages_for_defrag seems to be lost, so replace it
of btrfs_mod_outstanding_extents().
Fixes: 8b62f87bad9c ("Btrfs: rework outstanding_extents")
Signed-off-by: Su Yue <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/ioctl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 7592beb53fc4e..00ff4349b4579 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -1337,7 +1337,7 @@ static int cluster_pages_for_defrag(struct inode *inode,
if (i_done != page_cnt) {
spin_lock(&BTRFS_I(inode)->lock);
- BTRFS_I(inode)->outstanding_extents++;
+ btrfs_mod_outstanding_extents(BTRFS_I(inode), 1);
spin_unlock(&BTRFS_I(inode)->lock);
btrfs_delalloc_release_space(inode, data_reserved,
start_index << PAGE_SHIFT,
--
2.20.1
From: Al Viro <[email protected]>
[ Upstream commit 50f45326afab723df529eca54095e2feac24da2d ]
pointer-taking ones need compat_ptr(); int-taking one doesn't.
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/pty.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 678406e0948b2..00099a8439d21 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -28,6 +28,7 @@
#include <linux/mount.h>
#include <linux/file.h>
#include <linux/ioctl.h>
+#include <linux/compat.h>
#undef TTY_DEBUG_HANGUP
#ifdef TTY_DEBUG_HANGUP
@@ -488,6 +489,7 @@ static int pty_bsd_ioctl(struct tty_struct *tty,
return -ENOIOCTLCMD;
}
+#ifdef CONFIG_COMPAT
static long pty_bsd_compat_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
@@ -495,8 +497,11 @@ static long pty_bsd_compat_ioctl(struct tty_struct *tty,
* PTY ioctls don't require any special translation between 32-bit and
* 64-bit userspace, they are already compatible.
*/
- return pty_bsd_ioctl(tty, cmd, arg);
+ return pty_bsd_ioctl(tty, cmd, (unsigned long)compat_ptr(arg));
}
+#else
+#define pty_bsd_compat_ioctl NULL
+#endif
static int legacy_count = CONFIG_LEGACY_PTY_COUNT;
/*
@@ -676,6 +681,7 @@ static int pty_unix98_ioctl(struct tty_struct *tty,
return -ENOIOCTLCMD;
}
+#ifdef CONFIG_COMPAT
static long pty_unix98_compat_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
@@ -683,8 +689,12 @@ static long pty_unix98_compat_ioctl(struct tty_struct *tty,
* PTY ioctls don't require any special translation between 32-bit and
* 64-bit userspace, they are already compatible.
*/
- return pty_unix98_ioctl(tty, cmd, arg);
+ return pty_unix98_ioctl(tty, cmd,
+ cmd == TIOCSIG ? arg : (unsigned long)compat_ptr(arg));
}
+#else
+#define pty_unix98_compat_ioctl NULL
+#endif
/**
* ptm_unix98_lookup - find a pty master
--
2.20.1
From: Chaotian Jing <[email protected]>
[ Upstream commit 56f6cbbed0463f1c78d602b17c315916cc1cd238 ]
as the mmc core layer has the mmc->actual_clock, so fill it
and drop msdc_host->sclk.
Signed-off-by: Chaotian Jing <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/mtk-sd.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index f171cce5197de..621c914dc5c01 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -390,7 +390,6 @@ struct msdc_host {
struct clk *src_clk_cg; /* msdc source clock control gate */
u32 mclk; /* mmc subsystem clock frequency */
u32 src_clk_freq; /* source clock frequency */
- u32 sclk; /* SD/MS bus clock frequency */
unsigned char timing;
bool vqmmc_enabled;
u32 latch_ck;
@@ -635,10 +634,10 @@ static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
host->timeout_ns = ns;
host->timeout_clks = clks;
- if (host->sclk == 0) {
+ if (host->mmc->actual_clock == 0) {
timeout = 0;
} else {
- clk_ns = 1000000000UL / host->sclk;
+ clk_ns = 1000000000UL / host->mmc->actual_clock;
timeout = (ns + clk_ns - 1) / clk_ns + clks;
/* in 1048576 sclk cycle unit */
timeout = (timeout + (0x1 << 20) - 1) >> 20;
@@ -683,6 +682,7 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
if (!hz) {
dev_dbg(host->dev, "set mclk to 0\n");
host->mclk = 0;
+ host->mmc->actual_clock = 0;
sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
return;
}
@@ -761,7 +761,7 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
cpu_relax();
sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
- host->sclk = sclk;
+ host->mmc->actual_clock = sclk;
host->mclk = hz;
host->timing = timing;
/* need because clk changed. */
@@ -772,7 +772,7 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
* mmc_select_hs400() will drop to 50Mhz and High speed mode,
* tune result of hs200/200Mhz is not suitable for 50Mhz
*/
- if (host->sclk <= 52000000) {
+ if (host->mmc->actual_clock <= 52000000) {
writel(host->def_tune_para.iocon, host->base + MSDC_IOCON);
writel(host->def_tune_para.pad_tune, host->base + tune_reg);
} else {
@@ -787,7 +787,8 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_CMDRRDLY,
host->hs400_cmd_int_delay);
- dev_dbg(host->dev, "sclk: %d, timing: %d\n", host->sclk, timing);
+ dev_dbg(host->dev, "sclk: %d, timing: %d\n", host->mmc->actual_clock,
+ timing);
}
static inline u32 msdc_cmd_find_resp(struct msdc_host *host,
--
2.20.1
From: Sergei Shtylyov <[email protected]>
[ Upstream commit f34c6e6257aa477cdfe7e9bbbecd3c5648ecda69 ]
Since commit 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
platform_get_irq() can return -EPROBE_DEFER. However, the driver overrides
an error returned by that function with -ENOENT which breaks the deferred
probing. Propagate upstream an error code returned by platform_get_irq()
and remove the bogus "platform" from the error message, while at it...
Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergei Shtylyov <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-sh-msiof.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 101cd6aae2ea5..30ea0a2068e09 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -1343,8 +1343,8 @@ static int sh_msiof_spi_probe(struct platform_device *pdev)
i = platform_get_irq(pdev, 0);
if (i < 0) {
- dev_err(&pdev->dev, "cannot get platform IRQ\n");
- ret = -ENOENT;
+ dev_err(&pdev->dev, "cannot get IRQ\n");
+ ret = i;
goto err1;
}
--
2.20.1
From: Jens Axboe <[email protected]>
[ Upstream commit 8f94004e2a51a3ea195cf3447eb5d5906f36d8b3 ]
We can't modify cdo->capability as it is defined as a const.
Change the modification hack to just WARN_ON_ONCE() if we hit
any of the invalid combinations.
This fixes a regression for pcd, which doesn't work after the
constify patch.
Fixes: 853fe1bf7554 ("cdrom: Make device operations read-only")
Tested-by: Ondrej Zary <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cdrom/cdrom.c | 27 +++++++++++++--------------
1 file changed, 13 insertions(+), 14 deletions(-)
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index 27a82a559ab94..933268b8d6a54 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -411,10 +411,10 @@ static int cdrom_get_disc_info(struct cdrom_device_info *cdi,
* hack to have the capability flags defined const, while we can still
* change it here without gcc complaining at every line.
*/
-#define ENSURE(call, bits) \
-do { \
- if (cdo->call == NULL) \
- *change_capability &= ~(bits); \
+#define ENSURE(cdo, call, bits) \
+do { \
+ if (cdo->call == NULL) \
+ WARN_ON_ONCE((cdo)->capability & (bits)); \
} while (0)
/*
@@ -590,7 +590,6 @@ int register_cdrom(struct cdrom_device_info *cdi)
{
static char banner_printed;
const struct cdrom_device_ops *cdo = cdi->ops;
- int *change_capability = (int *)&cdo->capability; /* hack */
cd_dbg(CD_OPEN, "entering register_cdrom\n");
@@ -602,16 +601,16 @@ int register_cdrom(struct cdrom_device_info *cdi)
cdrom_sysctl_register();
}
- ENSURE(drive_status, CDC_DRIVE_STATUS);
+ ENSURE(cdo, drive_status, CDC_DRIVE_STATUS);
if (cdo->check_events == NULL && cdo->media_changed == NULL)
- *change_capability = ~(CDC_MEDIA_CHANGED | CDC_SELECT_DISC);
- ENSURE(tray_move, CDC_CLOSE_TRAY | CDC_OPEN_TRAY);
- ENSURE(lock_door, CDC_LOCK);
- ENSURE(select_speed, CDC_SELECT_SPEED);
- ENSURE(get_last_session, CDC_MULTI_SESSION);
- ENSURE(get_mcn, CDC_MCN);
- ENSURE(reset, CDC_RESET);
- ENSURE(generic_packet, CDC_GENERIC_PACKET);
+ WARN_ON_ONCE(cdo->capability & (CDC_MEDIA_CHANGED | CDC_SELECT_DISC));
+ ENSURE(cdo, tray_move, CDC_CLOSE_TRAY | CDC_OPEN_TRAY);
+ ENSURE(cdo, lock_door, CDC_LOCK);
+ ENSURE(cdo, select_speed, CDC_SELECT_SPEED);
+ ENSURE(cdo, get_last_session, CDC_MULTI_SESSION);
+ ENSURE(cdo, get_mcn, CDC_MCN);
+ ENSURE(cdo, reset, CDC_RESET);
+ ENSURE(cdo, generic_packet, CDC_GENERIC_PACKET);
cdi->mc_flags = 0;
cdi->options = CDO_USE_FFLAGS;
--
2.20.1
From: Al Viro <[email protected]>
[ Upstream commit 27230e51349fde075598c1b59d15e1ff802f3f6e ]
compat_ptr() for pointer-taking ones...
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/synclink_gt.c | 16 ++++------------
1 file changed, 4 insertions(+), 12 deletions(-)
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index a94086597ebd6..b88ecf102764e 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -1186,14 +1186,13 @@ static long slgt_compat_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct slgt_info *info = tty->driver_data;
- int rc = -ENOIOCTLCMD;
+ int rc;
if (sanity_check(info, tty->name, "compat_ioctl"))
return -ENODEV;
DBGINFO(("%s compat_ioctl() cmd=%08X\n", info->device_name, cmd));
switch (cmd) {
-
case MGSL_IOCSPARAMS32:
rc = set_params32(info, compat_ptr(arg));
break;
@@ -1213,18 +1212,11 @@ static long slgt_compat_ioctl(struct tty_struct *tty,
case MGSL_IOCWAITGPIO:
case MGSL_IOCGXSYNC:
case MGSL_IOCGXCTRL:
- case MGSL_IOCSTXIDLE:
- case MGSL_IOCTXENABLE:
- case MGSL_IOCRXENABLE:
- case MGSL_IOCTXABORT:
- case TIOCMIWAIT:
- case MGSL_IOCSIF:
- case MGSL_IOCSXSYNC:
- case MGSL_IOCSXCTRL:
- rc = ioctl(tty, cmd, arg);
+ rc = ioctl(tty, cmd, (unsigned long)compat_ptr(arg));
break;
+ default:
+ rc = ioctl(tty, cmd, arg);
}
-
DBGINFO(("%s compat_ioctl() cmd=%08X rc=%d\n", info->device_name, cmd, rc));
return rc;
}
--
2.20.1
From: Alan Douglas <[email protected]>
[ Upstream commit e81e36a96bb56f243b5ac1d114c37c086761595b ]
According to the PCIe specification, although the MSI data is only
16bits, the upper 16bits should be written as 0. Use writel
instead of writew when writing the MSI data to the host.
Fixes: 37dddf14f1ae ("PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller")
Signed-off-by: Alan Douglas <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/pcie-cadence-ep.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/controller/pcie-cadence-ep.c b/drivers/pci/controller/pcie-cadence-ep.c
index 6692654798d44..c3a088910f48d 100644
--- a/drivers/pci/controller/pcie-cadence-ep.c
+++ b/drivers/pci/controller/pcie-cadence-ep.c
@@ -355,7 +355,7 @@ static int cdns_pcie_ep_send_msi_irq(struct cdns_pcie_ep *ep, u8 fn,
ep->irq_pci_addr = (pci_addr & ~pci_addr_mask);
ep->irq_pci_fn = fn;
}
- writew(data, ep->irq_cpu_addr + (pci_addr & pci_addr_mask));
+ writel(data, ep->irq_cpu_addr + (pci_addr & pci_addr_mask));
return 0;
}
--
2.20.1
From: Ulf Hansson <[email protected]>
[ Upstream commit 2c9b7f8772033cc8bafbd4eefe2ca605bf3eb094 ]
A caller of pm_genpd_init() that provides some states for the genpd via the
->states pointer in the struct generic_pm_domain, should also provide a
governor. This because it's the job of the governor to pick a state that
satisfies the constraints.
Therefore, let's print a warning to inform the user about such bogus
configuration and avoid to bail out, by instead picking the shallowest
state before genpd invokes the ->power_off() callback.
Signed-off-by: Ulf Hansson <[email protected]>
Reviewed-by: Lina Iyer <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/base/power/domain.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index bf5be0bfaf773..52c292d0908a2 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -467,6 +467,10 @@ static int genpd_power_off(struct generic_pm_domain *genpd, bool one_dev_on,
return -EAGAIN;
}
+ /* Default to shallowest state. */
+ if (!genpd->gov)
+ genpd->state_idx = 0;
+
if (genpd->power_off) {
int ret;
@@ -1686,6 +1690,8 @@ int pm_genpd_init(struct generic_pm_domain *genpd,
ret = genpd_set_default_power_state(genpd);
if (ret)
return ret;
+ } else if (!gov) {
+ pr_warn("%s : no governor for states\n", genpd->name);
}
device_initialize(&genpd->dev);
--
2.20.1
From: Vignesh R <[email protected]>
[ Upstream commit baf8b9f8d260c55a86405f70a384c29cda888476 ]
Commit b682cffa3ac6 ("spi: omap2-mcspi: Set FIFO DMA trigger level to word length")
broke SPI transfers where bits_per_word != 8. This is because of
mimsatch between McSPI FIFO level event trigger size (SPI word length) and
DMA request size(word length * maxburst). This leads to data
corruption, lockup and errors like:
spi1.0: EOW timed out
Fix this by setting DMA maxburst size to 1 so that
McSPI FIFO level event trigger size matches DMA request size.
Fixes: b682cffa3ac6 ("spi: omap2-mcspi: Set FIFO DMA trigger level to word length")
Cc: [email protected]
Reported-by: David Lechner <[email protected]>
Tested-by: David Lechner <[email protected]>
Signed-off-by: Vignesh R <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-omap2-mcspi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index f50cb8a4b4138..eb2d2de172af3 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -607,8 +607,8 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
cfg.dst_addr = cs->phys + OMAP2_MCSPI_TX0;
cfg.src_addr_width = width;
cfg.dst_addr_width = width;
- cfg.src_maxburst = es;
- cfg.dst_maxburst = es;
+ cfg.src_maxburst = 1;
+ cfg.dst_maxburst = 1;
rx = xfer->rx_buf;
tx = xfer->tx_buf;
--
2.20.1
From: YueHaibing <[email protected]>
[ Upstream commit 0db55093b56618088b9a1d445eb6e43b311bea33 ]
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/broadcom/genet/bcmgenet.c: In function 'bcmgenet_power_down':
drivers/net/ethernet/broadcom/genet/bcmgenet.c:1136:6: warning:
variable 'ret' set but not used [-Wunused-but-set-variable]
bcmgenet_power_down should return 'ret' instead of 0.
Fixes: ca8cf341903f ("net: bcmgenet: propagate errors from bcmgenet_power_down")
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index bb60104b4f805..338d223804343 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1169,7 +1169,7 @@ static int bcmgenet_power_down(struct bcmgenet_priv *priv,
break;
}
- return 0;
+ return ret;
}
static void bcmgenet_power_up(struct bcmgenet_priv *priv,
--
2.20.1
From: Chao Yu <[email protected]>
[ Upstream commit 2baf07818549c8bb8d7b3437e889b86eab56d38e ]
We need to drop PG_checked flag on page as well when we clear PG_uptodate
flag, in order to avoid treating the page as GCing one later.
Signed-off-by: Weichao Guo <[email protected]>
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/data.c | 8 +++++++-
fs/f2fs/dir.c | 1 +
fs/f2fs/segment.c | 4 +++-
3 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index 9511466bc7857..fa9ca27c9e5cb 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -1775,6 +1775,7 @@ int f2fs_do_write_data_page(struct f2fs_io_info *fio)
/* This page is already truncated */
if (fio->old_blkaddr == NULL_ADDR) {
ClearPageUptodate(page);
+ clear_cold_data(page);
goto out_writepage;
}
got_it:
@@ -1950,8 +1951,10 @@ static int __write_data_page(struct page *page, bool *submitted,
out:
inode_dec_dirty_pages(inode);
- if (err)
+ if (err) {
ClearPageUptodate(page);
+ clear_cold_data(page);
+ }
if (wbc->for_reclaim) {
f2fs_submit_merged_write_cond(sbi, inode, 0, page->index, DATA);
@@ -2570,6 +2573,8 @@ void f2fs_invalidate_page(struct page *page, unsigned int offset,
}
}
+ clear_cold_data(page);
+
/* This is atomic written page, keep Private */
if (IS_ATOMIC_WRITTEN_PAGE(page))
return f2fs_drop_inmem_page(inode, page);
@@ -2588,6 +2593,7 @@ int f2fs_release_page(struct page *page, gfp_t wait)
if (IS_ATOMIC_WRITTEN_PAGE(page))
return 0;
+ clear_cold_data(page);
set_page_private(page, 0);
ClearPagePrivate(page);
return 1;
diff --git a/fs/f2fs/dir.c b/fs/f2fs/dir.c
index ecc3a4e2be96d..cd611a57d04d7 100644
--- a/fs/f2fs/dir.c
+++ b/fs/f2fs/dir.c
@@ -733,6 +733,7 @@ void f2fs_delete_entry(struct f2fs_dir_entry *dentry, struct page *page,
clear_page_dirty_for_io(page);
ClearPagePrivate(page);
ClearPageUptodate(page);
+ clear_cold_data(page);
inode_dec_dirty_pages(dir);
f2fs_remove_dirty_inode(dir);
}
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index 10d5dcdb34be6..4d98e911fa3cc 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -277,8 +277,10 @@ static int __revoke_inmem_pages(struct inode *inode,
}
next:
/* we don't need to invalidate this in the sccessful status */
- if (drop || recover)
+ if (drop || recover) {
ClearPageUptodate(page);
+ clear_cold_data(page);
+ }
set_page_private(page, 0);
ClearPagePrivate(page);
f2fs_put_page(page, 1);
--
2.20.1
[cc [email protected]]
Hi Sasha,
Any reason these these autosel patches are not being cc'd to the XFS
list for XFS maintainer visibility and review?
Cheers,
Dave.
On Sat, Nov 16, 2019 at 10:38:24AM -0500, Sasha Levin wrote:
> From: Dave Chinner <[email protected]>
>
> [ Upstream commit 37fd1678245f7a5898c1b05128bc481fb403c290 ]
>
> When looking at a 4.18 based KASAN use after free report, I noticed
> that racing xfs_buf_rele() may race on dropping the last reference
> to the buffer and taking the buffer lock. This was the symptom
> displayed by the KASAN report, but the actual issue that was
> reported had already been fixed in 4.19-rc1 by commit e339dd8d8b04
> ("xfs: use sync buffer I/O for sync delwri queue submission").
>
> Despite this, I think there is still an issue with xfs_buf_rele()
> in this code:
>
> release = atomic_dec_and_lock(&bp->b_hold, &pag->pag_buf_lock);
> spin_lock(&bp->b_lock);
> if (!release) {
> .....
>
> If two threads race on the b_lock after both dropping a reference
> and one getting dropping the last reference so release = true, we
> end up with:
>
> CPU 0 CPU 1
> atomic_dec_and_lock()
> atomic_dec_and_lock()
> spin_lock(&bp->b_lock)
> spin_lock(&bp->b_lock)
> <spins>
> <release = true bp->b_lru_ref = 0>
> <remove from lists>
> freebuf = true
> spin_unlock(&bp->b_lock)
> xfs_buf_free(bp)
> <gets lock, reading and writing freed memory>
> <accesses freed memory>
> spin_unlock(&bp->b_lock) <reads/writes freed memory>
>
> IOWs, we can't safely take bp->b_lock after dropping the hold
> reference because the buffer may go away at any time after we
> drop that reference. However, this can be fixed simply by taking the
> bp->b_lock before we drop the reference.
>
> It is safe to nest the pag_buf_lock inside bp->b_lock as the
> pag_buf_lock is only used to serialise against lookup in
> xfs_buf_find() and no other locks are held over or under the
> pag_buf_lock there. Make this clear by documenting the buffer lock
> orders at the top of the file.
>
> Signed-off-by: Dave Chinner <[email protected]>
> Reviewed-by: Brian Foster <[email protected]>
> Reviewed-by: Carlos Maiolino <[email protected]
> Signed-off-by: Dave Chinner <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> fs/xfs/xfs_buf.c | 38 +++++++++++++++++++++++++++++++++++++-
> 1 file changed, 37 insertions(+), 1 deletion(-)
>
> diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c
> index e839907e8492f..f4a89c94c931b 100644
> --- a/fs/xfs/xfs_buf.c
> +++ b/fs/xfs/xfs_buf.c
> @@ -37,6 +37,32 @@ static kmem_zone_t *xfs_buf_zone;
> #define xb_to_gfp(flags) \
> ((((flags) & XBF_READ_AHEAD) ? __GFP_NORETRY : GFP_NOFS) | __GFP_NOWARN)
>
> +/*
> + * Locking orders
> + *
> + * xfs_buf_ioacct_inc:
> + * xfs_buf_ioacct_dec:
> + * b_sema (caller holds)
> + * b_lock
> + *
> + * xfs_buf_stale:
> + * b_sema (caller holds)
> + * b_lock
> + * lru_lock
> + *
> + * xfs_buf_rele:
> + * b_lock
> + * pag_buf_lock
> + * lru_lock
> + *
> + * xfs_buftarg_wait_rele
> + * lru_lock
> + * b_lock (trylock due to inversion)
> + *
> + * xfs_buftarg_isolate
> + * lru_lock
> + * b_lock (trylock due to inversion)
> + */
>
> static inline int
> xfs_buf_is_vmapped(
> @@ -1006,8 +1032,18 @@ xfs_buf_rele(
>
> ASSERT(atomic_read(&bp->b_hold) > 0);
>
> - release = atomic_dec_and_lock(&bp->b_hold, &pag->pag_buf_lock);
> + /*
> + * We grab the b_lock here first to serialise racing xfs_buf_rele()
> + * calls. The pag_buf_lock being taken on the last reference only
> + * serialises against racing lookups in xfs_buf_find(). IOWs, the second
> + * to last reference we drop here is not serialised against the last
> + * reference until we take bp->b_lock. Hence if we don't grab b_lock
> + * first, the last "release" reference can win the race to the lock and
> + * free the buffer before the second-to-last reference is processed,
> + * leading to a use-after-free scenario.
> + */
> spin_lock(&bp->b_lock);
> + release = atomic_dec_and_lock(&bp->b_hold, &pag->pag_buf_lock);
> if (!release) {
> /*
> * Drop the in-flight state if the buffer is already on the LRU
> --
> 2.20.1
>
>
--
Dave Chinner
[email protected]
On Sun, Nov 17, 2019 at 08:54:23AM +1100, Dave Chinner wrote:
>[cc [email protected]]
>
>Hi Sasha,
>
>Any reason these these autosel patches are not being cc'd to the XFS
>list for XFS maintainer visibility and review?
Interesting! It looks like the XFS entry in MAINTAINERS has duplicate
entries for the mailing list, once with the M: tag and once with the L:
tag, so when I run get_maintainer.pl I see:
$ scripts/get_maintainer.pl -f fs/xfs/
"Darrick J. Wong" <[email protected]> (supporter:XFS FILESYSTEM)
[email protected] (supporter:XFS FILESYSTEM)
[email protected] (open list)
Which doesn't list an "open list" besides LKML.
I've fixed up my scripts to address that, sorry for missing it.
--
Thanks,
Sasha
On Sat, Nov 16, 2019 at 10:37:43AM -0500, Sasha Levin wrote:
> From: Liu Bo <[email protected]>
>
> [ Upstream commit de2c6615dcddf2af868c5cbd1db2e9e73b4beb58 ]
>
> This fixes btrfs_get_extent to be consistent with our existing
> declaration style.
The patch is pure white space fix with no effects. I don't see that it
would be needed for a followup patch. What was the reason to add it to
autosel/stable ?
On Mon, Nov 18, 2019 at 12:11:43PM +0100, David Sterba wrote:
>On Sat, Nov 16, 2019 at 10:37:43AM -0500, Sasha Levin wrote:
>> From: Liu Bo <[email protected]>
>>
>> [ Upstream commit de2c6615dcddf2af868c5cbd1db2e9e73b4beb58 ]
>>
>> This fixes btrfs_get_extent to be consistent with our existing
>> declaration style.
>
>The patch is pure white space fix with no effects. I don't see that it
>would be needed for a followup patch. What was the reason to add it to
>autosel/stable ?
Oh I grabbed it as a dependency for a follow up patch which I ended up
dropping, and forgot this one in. I'll drop it as well, sorry for the
noise.
--
Thanks,
Sasha
On Sat, Nov 16, 2019 at 05:23:28PM +0100, Ilya Dryomov wrote:
>On Sat, Nov 16, 2019 at 4:43 PM Sasha Levin <[email protected]> wrote:
>>
>> From: Ilya Dryomov <[email protected]>
>>
>> [ Upstream commit 894868330a1e038ea4a65dbb81741eef70ad71b1 ]
>>
>> Because send_mds_reconnect() wants to send a message with a pagelist
>> and pass the ownership to the messenger, ceph_msg_data_add_pagelist()
>> consumes a ref which is then put in ceph_msg_data_destroy(). This
>> makes managing pagelists in the OSD client (where they are wrapped in
>> ceph_osd_data) unnecessarily hard because the handoff only happens in
>> ceph_osdc_start_request() instead of when the pagelist is passed to
>> ceph_osd_data_pagelist_init(). I counted several memory leaks on
>> various error paths.
>>
>> Fix up ceph_msg_data_add_pagelist() and carry a pagelist ref in
>> ceph_osd_data.
>>
>> Signed-off-by: Ilya Dryomov <[email protected]>
>> Signed-off-by: Sasha Levin <[email protected]>
>> ---
>> fs/ceph/mds_client.c | 2 +-
>> net/ceph/messenger.c | 1 +
>> net/ceph/osd_client.c | 8 ++++++++
>> 3 files changed, 10 insertions(+), 1 deletion(-)
>>
>> diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
>> index 09db6d08614d2..94494d05a94cb 100644
>> --- a/fs/ceph/mds_client.c
>> +++ b/fs/ceph/mds_client.c
>> @@ -2184,7 +2184,6 @@ static struct ceph_msg *create_request_message(struct ceph_mds_client *mdsc,
>>
>> if (req->r_pagelist) {
>> struct ceph_pagelist *pagelist = req->r_pagelist;
>> - refcount_inc(&pagelist->refcnt);
>> ceph_msg_data_add_pagelist(msg, pagelist);
>> msg->hdr.data_len = cpu_to_le32(pagelist->length);
>> } else {
>> @@ -3289,6 +3288,7 @@ static void send_mds_reconnect(struct ceph_mds_client *mdsc,
>> mutex_unlock(&mdsc->mutex);
>>
>> up_read(&mdsc->snap_rwsem);
>> + ceph_pagelist_release(pagelist);
>> return;
>>
>> fail:
>> diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
>> index f7d7f32ac673c..2c8cd339d59ea 100644
>> --- a/net/ceph/messenger.c
>> +++ b/net/ceph/messenger.c
>> @@ -3323,6 +3323,7 @@ void ceph_msg_data_add_pagelist(struct ceph_msg *msg,
>>
>> data = ceph_msg_data_create(CEPH_MSG_DATA_PAGELIST);
>> BUG_ON(!data);
>> + refcount_inc(&pagelist->refcnt);
>> data->pagelist = pagelist;
>>
>> list_add_tail(&data->links, &msg->data);
>> diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
>> index 76c41a84550e7..c3494c1fb3a9a 100644
>> --- a/net/ceph/osd_client.c
>> +++ b/net/ceph/osd_client.c
>> @@ -126,6 +126,9 @@ static void ceph_osd_data_init(struct ceph_osd_data *osd_data)
>> osd_data->type = CEPH_OSD_DATA_TYPE_NONE;
>> }
>>
>> +/*
>> + * Consumes @pages if @own_pages is true.
>> + */
>> static void ceph_osd_data_pages_init(struct ceph_osd_data *osd_data,
>> struct page **pages, u64 length, u32 alignment,
>> bool pages_from_pool, bool own_pages)
>> @@ -138,6 +141,9 @@ static void ceph_osd_data_pages_init(struct ceph_osd_data *osd_data,
>> osd_data->own_pages = own_pages;
>> }
>>
>> +/*
>> + * Consumes a ref on @pagelist.
>> + */
>> static void ceph_osd_data_pagelist_init(struct ceph_osd_data *osd_data,
>> struct ceph_pagelist *pagelist)
>> {
>> @@ -362,6 +368,8 @@ static void ceph_osd_data_release(struct ceph_osd_data *osd_data)
>> num_pages = calc_pages_for((u64)osd_data->alignment,
>> (u64)osd_data->length);
>> ceph_release_page_vector(osd_data->pages, num_pages);
>> + } else if (osd_data->type == CEPH_OSD_DATA_TYPE_PAGELIST) {
>> + ceph_pagelist_release(osd_data->pagelist);
>> }
>> ceph_osd_data_init(osd_data);
>> }
>
>Hi Sasha,
>
>This commit was part of a larger series and shouldn't be backported on
>its own. Please drop it.
Dropped, thanks!
--
Thanks,
Sasha