Without this magic write the timer doesn't work and boot gets stuck.
Signed-off-by: Andreas Färber <[email protected]>
---
What is the name of the register 0xff018000?
Is 0x1 a BIT(0) write, or how are the register bits defined?
Is this a reset or a clock gate? How should we model it in DT?
v3 -> v4:
* Use writel_relaxed() instead of writel()
v2 -> v3: Unchanged
v2: New
arch/arm/mach-realtek/rtd1195.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/mach-realtek/rtd1195.c b/arch/arm/mach-realtek/rtd1195.c
index 0381a4447384..8d4de0c2308d 100644
--- a/arch/arm/mach-realtek/rtd1195.c
+++ b/arch/arm/mach-realtek/rtd1195.c
@@ -5,6 +5,9 @@
* Copyright (c) 2017-2019 Andreas Färber
*/
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/io.h>
#include <linux/memblock.h>
#include <asm/mach/arch.h>
@@ -27,6 +30,18 @@ static void __init rtd1195_reserve(void)
rtd1195_memblock_remove(0x18100000, 0x01000000);
}
+static void __init rtd1195_init_time(void)
+{
+ void __iomem *base;
+
+ base = ioremap(0xff018000, 4);
+ writel_relaxed(0x1, base);
+ iounmap(base);
+
+ of_clk_init(NULL);
+ timer_probe();
+}
+
static const char *const rtd1195_dt_compat[] __initconst = {
"realtek,rtd1195",
NULL
@@ -34,6 +49,7 @@ static const char *const rtd1195_dt_compat[] __initconst = {
DT_MACHINE_START(rtd1195, "Realtek RTD1195")
.dt_compat = rtd1195_dt_compat,
+ .init_time = rtd1195_init_time,
.reserve = rtd1195_reserve,
.l2c_aux_val = 0x0,
.l2c_aux_mask = ~0x0,
--
2.16.4