The mtk-xhci platform glue sets the DMA mask to 32 bits on its own,
which was needed before commit fda182d80a0b ("usb: xhci: configure
32-bit DMA if the controller does not support 64-bit DMA"), but now it
has no effect, because xhci_gen_setup() sets it up for us according to
hardware capabilities. Remove the useless code.
Signed-off-by: Tomasz Figa <[email protected]>
---
drivers/usb/host/xhci-mtk.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index b18a6baef204a..bfbdb3ceed291 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -488,11 +488,6 @@ static int xhci_mtk_probe(struct platform_device *pdev)
goto disable_clk;
}
- /* Initialize dma_mask and coherent_dma_mask to 32-bits */
- ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
- if (ret)
- goto disable_clk;
-
hcd = usb_create_hcd(driver, dev, dev_name(dev));
if (!hcd) {
ret = -ENOMEM;
--
2.24.1.735.g03f4e72817-goog