2020-02-02 13:03:13

by Adam Ford

Subject: [PATCH V2 5/5] arm64: dts: enable fspi in imx8mm dts

Pull in upstream patch from NXP repo to:
enable fspi in imx8mm DT file

Signed-off-by: Han Xu <[email protected]>
Signed-off-by: Adam Ford <[email protected]>
---
V2: Reorder s-o-b lines to give credit in proper order.

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 1e5e11592f7b..679769fe6cab 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -558,7 +558,21 @@ aips3: bus@30800000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x30800000 0x30800000 0x400000>;
+ ranges = <0x30800000 0x30800000 0x400000>,
+ <0x8000000 0x8000000 0x10000000>;
+
+ flexspi: spi@30bb0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nxp,imx8mm-fspi";
+ reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
+ reg-names = "fspi_base", "fspi_mmap";
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_QSPI_ROOT>,
+ <&clk IMX8MM_CLK_QSPI_ROOT>;
+ clock-names = "fspi", "fspi_en";
+ status = "disabled";
+ };

ecspi1: spi@30820000 {
compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
--
2.24.0

2020-02-14 03:36:31

by Shawn Guo

Subject: Re: [PATCH V2 5/5] arm64: dts: enable fspi in imx8mm dts

On Sun, Feb 02, 2020 at 06:59:50AM -0600, Adam Ford wrote:
> Pull in upstream patch from NXP repo to:
> enable fspi in imx8mm DT file
>
> Signed-off-by: Han Xu <[email protected]>
> Signed-off-by: Adam Ford <[email protected]>
> ---
> V2: Reorder s-o-b lines to give credit in proper order.
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> index 1e5e11592f7b..679769fe6cab 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> @@ -558,7 +558,21 @@ aips3: bus@30800000 {
> compatible = "simple-bus";
> #address-cells = <1>;
> #size-cells = <1>;
> - ranges = <0x30800000 0x30800000 0x400000>;
> + ranges = <0x30800000 0x30800000 0x400000>,
> + <0x8000000 0x8000000 0x10000000>;
> +
> + flexspi: spi@30bb0000 {

Keep the node sort in unit-address.

Shawn

> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "nxp,imx8mm-fspi";
> + reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
> + reg-names = "fspi_base", "fspi_mmap";
> + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MM_CLK_QSPI_ROOT>,
> + <&clk IMX8MM_CLK_QSPI_ROOT>;
> + clock-names = "fspi", "fspi_en";
> + status = "disabled";
> + };
>
> ecspi1: spi@30820000 {
> compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
> --
> 2.24.0
>