2020-02-24 23:10:07

by Leo Li

[permalink] [raw]
Subject: [PATCH 07/15] arm64: defconfig: Enable QorIQ cpufreq driver

Enables the generic QorIQ cpufreq driver to support frequency scaling
for various QorIQ SoCs. Enabled as built-in as it is a core feature.

Signed-off-by: Li Yang <[email protected]>
---
arch/arm64/configs/defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index e97ef8b944b8..996dc749ea5c 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -90,6 +90,7 @@ CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
CONFIG_ARM_QCOM_CPUFREQ_HW=y
CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
CONFIG_ARM_TEGRA186_CPUFREQ=y
+CONFIG_QORIQ_CPUFREQ=y
CONFIG_ARM_SCPI_PROTOCOL=y
CONFIG_RASPBERRYPI_FIRMWARE=y
CONFIG_INTEL_STRATIX10_SERVICE=y
@@ -722,7 +723,6 @@ CONFIG_COMMON_CLK_RK808=y
CONFIG_COMMON_CLK_SCPI=y
CONFIG_COMMON_CLK_CS2000_CP=y
CONFIG_COMMON_CLK_S2MPS11=y
-CONFIG_CLK_QORIQ=y
CONFIG_COMMON_CLK_PWM=y
CONFIG_CLK_RASPBERRYPI=m
CONFIG_CLK_IMX8MM=y
--
2.17.1


2020-03-11 06:13:36

by Shawn Guo

[permalink] [raw]
Subject: Re: [PATCH 07/15] arm64: defconfig: Enable QorIQ cpufreq driver

On Mon, Feb 24, 2020 at 05:08:02PM -0600, Li Yang wrote:
> Enables the generic QorIQ cpufreq driver to support frequency scaling
> for various QorIQ SoCs. Enabled as built-in as it is a core feature.
>
> Signed-off-by: Li Yang <[email protected]>
> ---
> arch/arm64/configs/defconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index e97ef8b944b8..996dc749ea5c 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -90,6 +90,7 @@ CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
> CONFIG_ARM_QCOM_CPUFREQ_HW=y
> CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
> CONFIG_ARM_TEGRA186_CPUFREQ=y
> +CONFIG_QORIQ_CPUFREQ=y
> CONFIG_ARM_SCPI_PROTOCOL=y
> CONFIG_RASPBERRYPI_FIRMWARE=y
> CONFIG_INTEL_STRATIX10_SERVICE=y
> @@ -722,7 +723,6 @@ CONFIG_COMMON_CLK_RK808=y
> CONFIG_COMMON_CLK_SCPI=y
> CONFIG_COMMON_CLK_CS2000_CP=y
> CONFIG_COMMON_CLK_S2MPS11=y
> -CONFIG_CLK_QORIQ=y

Why is this getting removed?

Shawn

> CONFIG_COMMON_CLK_PWM=y
> CONFIG_CLK_RASPBERRYPI=m
> CONFIG_CLK_IMX8MM=y
> --
> 2.17.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

2020-03-11 18:55:50

by Leo Li

[permalink] [raw]
Subject: RE: [PATCH 07/15] arm64: defconfig: Enable QorIQ cpufreq driver



> -----Original Message-----
> From: Shawn Guo <[email protected]>
> Sent: Wednesday, March 11, 2020 1:12 AM
> To: Leo Li <[email protected]>
> Cc: [email protected]; [email protected]
> Subject: Re: [PATCH 07/15] arm64: defconfig: Enable QorIQ cpufreq driver
>
> On Mon, Feb 24, 2020 at 05:08:02PM -0600, Li Yang wrote:
> > Enables the generic QorIQ cpufreq driver to support frequency scaling
> > for various QorIQ SoCs. Enabled as built-in as it is a core feature.
> >
> > Signed-off-by: Li Yang <[email protected]>
> > ---
> > arch/arm64/configs/defconfig | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> > index e97ef8b944b8..996dc749ea5c 100644
> > --- a/arch/arm64/configs/defconfig
> > +++ b/arch/arm64/configs/defconfig
> > @@ -90,6 +90,7 @@ CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
> > CONFIG_ARM_QCOM_CPUFREQ_HW=y
> > CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
> > CONFIG_ARM_TEGRA186_CPUFREQ=y
> > +CONFIG_QORIQ_CPUFREQ=y
> > CONFIG_ARM_SCPI_PROTOCOL=y
> > CONFIG_RASPBERRYPI_FIRMWARE=y
> > CONFIG_INTEL_STRATIX10_SERVICE=y
> > @@ -722,7 +723,6 @@ CONFIG_COMMON_CLK_RK808=y
> > CONFIG_COMMON_CLK_SCPI=y
> > CONFIG_COMMON_CLK_CS2000_CP=y
> > CONFIG_COMMON_CLK_S2MPS11=y
> > -CONFIG_CLK_QORIQ=y
>
> Why is this getting removed?

Newly added QORIQ_CPUFREQ selects CLK_QORIQ, so it is removed by savedefconfig.

Regards,
Leo

>
> Shawn
>
> > CONFIG_COMMON_CLK_PWM=y
> > CONFIG_CLK_RASPBERRYPI=m
> > CONFIG_CLK_IMX8MM=y
> > --
> > 2.17.1
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > [email protected]
> >
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.inf
> radead.org%2Fmailman%2Flistinfo%2Flinux-arm-
> kernel&amp;data=02%7C01%7Cleoyang.li%40nxp.com%7C9fc5f6a95bf74523
> 717708d7c5832d15%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C
> 637195039498757892&amp;sdata=nsR%2F3bVYD61W2%2BE393dhJNgKCp%2
> FfvH9cYSdRLckOxns%3D&amp;reserved=0

2020-03-12 14:23:39

by Shawn Guo

[permalink] [raw]
Subject: Re: [PATCH 07/15] arm64: defconfig: Enable QorIQ cpufreq driver

On Wed, Mar 11, 2020 at 06:54:00PM +0000, Leo Li wrote:
>
>
> > -----Original Message-----
> > From: Shawn Guo <[email protected]>
> > Sent: Wednesday, March 11, 2020 1:12 AM
> > To: Leo Li <[email protected]>
> > Cc: [email protected]; [email protected]
> > Subject: Re: [PATCH 07/15] arm64: defconfig: Enable QorIQ cpufreq driver
> >
> > On Mon, Feb 24, 2020 at 05:08:02PM -0600, Li Yang wrote:
> > > Enables the generic QorIQ cpufreq driver to support frequency scaling
> > > for various QorIQ SoCs. Enabled as built-in as it is a core feature.
> > >
> > > Signed-off-by: Li Yang <[email protected]>
> > > ---
> > > arch/arm64/configs/defconfig | 2 +-
> > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> > > index e97ef8b944b8..996dc749ea5c 100644
> > > --- a/arch/arm64/configs/defconfig
> > > +++ b/arch/arm64/configs/defconfig
> > > @@ -90,6 +90,7 @@ CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
> > > CONFIG_ARM_QCOM_CPUFREQ_HW=y
> > > CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
> > > CONFIG_ARM_TEGRA186_CPUFREQ=y
> > > +CONFIG_QORIQ_CPUFREQ=y
> > > CONFIG_ARM_SCPI_PROTOCOL=y
> > > CONFIG_RASPBERRYPI_FIRMWARE=y
> > > CONFIG_INTEL_STRATIX10_SERVICE=y
> > > @@ -722,7 +723,6 @@ CONFIG_COMMON_CLK_RK808=y
> > > CONFIG_COMMON_CLK_SCPI=y
> > > CONFIG_COMMON_CLK_CS2000_CP=y
> > > CONFIG_COMMON_CLK_S2MPS11=y
> > > -CONFIG_CLK_QORIQ=y
> >
> > Why is this getting removed?
>
> Newly added QORIQ_CPUFREQ selects CLK_QORIQ, so it is removed by savedefconfig.

Note it in the commit log please.

Shawn

2020-03-12 16:32:30

by Leo Li

[permalink] [raw]
Subject: RE: [PATCH 07/15] arm64: defconfig: Enable QorIQ cpufreq driver



> -----Original Message-----
> From: Shawn Guo <[email protected]>
> Sent: Thursday, March 12, 2020 9:23 AM
> To: Leo Li <[email protected]>
> Cc: [email protected]; [email protected]
> Subject: Re: [PATCH 07/15] arm64: defconfig: Enable QorIQ cpufreq driver
>
> On Wed, Mar 11, 2020 at 06:54:00PM +0000, Leo Li wrote:
> >
> >
> > > -----Original Message-----
> > > From: Shawn Guo <[email protected]>
> > > Sent: Wednesday, March 11, 2020 1:12 AM
> > > To: Leo Li <[email protected]>
> > > Cc: [email protected];
> > > [email protected]
> > > Subject: Re: [PATCH 07/15] arm64: defconfig: Enable QorIQ cpufreq
> > > driver
> > >
> > > On Mon, Feb 24, 2020 at 05:08:02PM -0600, Li Yang wrote:
> > > > Enables the generic QorIQ cpufreq driver to support frequency
> > > > scaling for various QorIQ SoCs. Enabled as built-in as it is a core feature.
> > > >
> > > > Signed-off-by: Li Yang <[email protected]>
> > > > ---
> > > > arch/arm64/configs/defconfig | 2 +-
> > > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > > >
> > > > diff --git a/arch/arm64/configs/defconfig
> > > > b/arch/arm64/configs/defconfig index e97ef8b944b8..996dc749ea5c
> > > > 100644
> > > > --- a/arch/arm64/configs/defconfig
> > > > +++ b/arch/arm64/configs/defconfig
> > > > @@ -90,6 +90,7 @@ CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
> > > > CONFIG_ARM_QCOM_CPUFREQ_HW=y
> CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
> > > > CONFIG_ARM_TEGRA186_CPUFREQ=y
> > > > +CONFIG_QORIQ_CPUFREQ=y
> > > > CONFIG_ARM_SCPI_PROTOCOL=y
> > > > CONFIG_RASPBERRYPI_FIRMWARE=y
> > > > CONFIG_INTEL_STRATIX10_SERVICE=y
> > > > @@ -722,7 +723,6 @@ CONFIG_COMMON_CLK_RK808=y
> > > > CONFIG_COMMON_CLK_SCPI=y
> CONFIG_COMMON_CLK_CS2000_CP=y
> > > > CONFIG_COMMON_CLK_S2MPS11=y -CONFIG_CLK_QORIQ=y
> > >
> > > Why is this getting removed?
> >
> > Newly added QORIQ_CPUFREQ selects CLK_QORIQ, so it is removed by
> savedefconfig.
>
> Note it in the commit log please.

Sure. Already in v2.

Regards,
Leo