2020-03-11 22:56:47

by Leo Li

[permalink] [raw]
Subject: [PATCH v2 00/15] Enable drivers for NXP/FSL QorIQ arm64 boards

The series enables necessary drivers for the QorIQ reference boards
supported in mainline.

Li Yang (15):
arm64: defconfig: run through savedefconfig for ordering
arm64: defconfig: Enable NXP flexcan driver
arm64: defconfig: Enable QorIQ DPAA1 drivers
arm64: defconfig: Enable QorIQ DPAA2 drivers
arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch
arm64: defconfig: Enable NXP/FSL SPI controller drivers
arm64: defconfig: Enable QorIQ cpufreq driver
arm64: defconfig: Enable ARM SBSA watchdog driver
arm64: defconfig: Enable QorIQ IFC NAND controller driver
arm64: defconfig: Enable QorIQ GPIO driver
arm64: defconfig: Enable ARM Mali display driver
arm64: defconfig: Enable flash device drivers for QorIQ boards
arm64: defconfig: Enable RTC devices for QorIQ boards
arm64: defconfig: Enable PHY devices used on QorIQ boards
arm64: defconfig: Enable e1000 device

arch/arm64/configs/defconfig | 57 +++++++++++++++++++++++++++++-------
1 file changed, 46 insertions(+), 11 deletions(-)

--
2.17.1


2020-03-11 22:56:53

by Leo Li

[permalink] [raw]
Subject: [PATCH v2 02/15] arm64: defconfig: Enable NXP flexcan driver

Enables driver for FLEXCAN device which is used on a wide range of NXP
SoCs. Also enabling the related CAN framework.

Signed-off-by: Li Yang <[email protected]>
---
arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 618001ef5c81..747f233aca72 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -161,6 +161,8 @@ CONFIG_QRTR=m
CONFIG_QRTR_SMD=m
CONFIG_QRTR_TUN=m
CONFIG_BPF_JIT=y
+CONFIG_CAN=m
+CONFIG_CAN_FLEXCAN=m
CONFIG_BT=m
CONFIG_BT_HIDP=m
# CONFIG_BT_HS is not set
--
2.17.1

2020-03-16 01:33:55

by Shawn Guo

[permalink] [raw]
Subject: Re: [PATCH v2 00/15] Enable drivers for NXP/FSL QorIQ arm64 boards

On Wed, Mar 11, 2020 at 05:53:02PM -0500, Li Yang wrote:
> The series enables necessary drivers for the QorIQ reference boards
> supported in mainline.
>
> Li Yang (15):
> arm64: defconfig: run through savedefconfig for ordering
> arm64: defconfig: Enable NXP flexcan driver
> arm64: defconfig: Enable QorIQ DPAA1 drivers
> arm64: defconfig: Enable QorIQ DPAA2 drivers
> arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch
> arm64: defconfig: Enable NXP/FSL SPI controller drivers
> arm64: defconfig: Enable QorIQ cpufreq driver
> arm64: defconfig: Enable ARM SBSA watchdog driver
> arm64: defconfig: Enable QorIQ IFC NAND controller driver
> arm64: defconfig: Enable QorIQ GPIO driver
> arm64: defconfig: Enable ARM Mali display driver
> arm64: defconfig: Enable flash device drivers for QorIQ boards
> arm64: defconfig: Enable RTC devices for QorIQ boards
> arm64: defconfig: Enable PHY devices used on QorIQ boards
> arm64: defconfig: Enable e1000 device

Applied all, thanks.