There is no point in exposing ncq_enable_prio sysfs attribute for
devices on PATA and non-NCQ capable SATA hosts so:
* remove dev_attr_ncq_prio_enable from ata_common_sdev_attrs[]
* add ata_ncq_sdev_attrs[]
* update ATA_NCQ_SHT() macro to use ata_ncq_sdev_attrs[]
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
drivers/ata/libata-scsi.c | 8 +++++++-
include/linux/libata.h | 11 ++++++++---
2 files changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index ebc3de7c363a..005c6f2f7d21 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -463,11 +463,17 @@ EXPORT_SYMBOL_GPL(dev_attr_sw_activity);
struct device_attribute *ata_common_sdev_attrs[] = {
&dev_attr_unload_heads,
- &dev_attr_ncq_prio_enable,
NULL
};
EXPORT_SYMBOL_GPL(ata_common_sdev_attrs);
+struct device_attribute *ata_ncq_sdev_attrs[] = {
+ &dev_attr_unload_heads,
+ &dev_attr_ncq_prio_enable,
+ NULL
+};
+EXPORT_SYMBOL_GPL(ata_ncq_sdev_attrs);
+
/**
* ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd.
* @sdev: SCSI device for which BIOS geometry is to be determined
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 710e09dae910..350fa584acde 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1334,6 +1334,7 @@ extern int ata_link_nr_enabled(struct ata_link *link);
extern const struct ata_port_operations ata_base_port_ops;
extern const struct ata_port_operations sata_port_ops;
extern struct device_attribute *ata_common_sdev_attrs[];
+extern struct device_attribute *ata_ncq_sdev_attrs[];
/*
* All sht initializers (BASE, PIO, BMDMA, NCQ) must be instantiated
@@ -1341,7 +1342,7 @@ extern struct device_attribute *ata_common_sdev_attrs[];
* edge driver's module reference, otherwise the driver can be unloaded
* even if the scsi_device is being accessed.
*/
-#define ATA_BASE_SHT(drv_name) \
+#define __ATA_BASE_SHT(drv_name) \
.module = THIS_MODULE, \
.name = drv_name, \
.ioctl = ata_scsi_ioctl, \
@@ -1355,11 +1356,15 @@ extern struct device_attribute *ata_common_sdev_attrs[];
.slave_configure = ata_scsi_slave_config, \
.slave_destroy = ata_scsi_slave_destroy, \
.bios_param = ata_std_bios_param, \
- .unlock_native_capacity = ata_scsi_unlock_native_capacity, \
+ .unlock_native_capacity = ata_scsi_unlock_native_capacity
+
+#define ATA_BASE_SHT(drv_name) \
+ __ATA_BASE_SHT(drv_name), \
.sdev_attrs = ata_common_sdev_attrs
#define ATA_NCQ_SHT(drv_name) \
- ATA_BASE_SHT(drv_name), \
+ __ATA_BASE_SHT(drv_name), \
+ .sdev_attrs = ata_ncq_sdev_attrs, \
.change_queue_depth = ata_scsi_change_queue_depth
/*
--
2.24.1