Fix the rsnd_ssi_stop function to skip disabling the individual SSIs of
a multi-SSI setup, as the actual stop is performed by rsnd_ssiu_stop_gen2
- the same logic as in rsnd_ssi_start. The attempt to disable these SSIs
was harmless, but caused a "status check failed" message to be printed
for every SSI in the multi-SSI setup.
The disabling of interrupts is still performed, as they are enabled for
all SSIs in rsnd_ssi_init, but care is taken to not accidentally set the
EN bit for an SSI where it was not set by rsnd_ssi_start.
Signed-off-by: Matthias Blankertz <[email protected]>
---
sound/soc/sh/rcar/ssi.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index 9900a4f6f4e5..4a7d3413917f 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -594,10 +594,16 @@ static int rsnd_ssi_stop(struct rsnd_mod *mod,
* Capture: It might not receave data. Do nothing
*/
if (rsnd_io_is_play(io)) {
- rsnd_mod_write(mod, SSICR, cr | EN);
+ rsnd_mod_write(mod, SSICR, cr | ssi->cr_en);
rsnd_ssi_status_check(mod, DIRQ);
}
+ /* In multi-SSI mode, stop is performed by setting ssi0129 in
+ * SSI_CONTROL to 0 (in rsnd_ssio_stop_gen2). Do nothing here.
+ */
+ if (rsnd_ssi_multi_slaves_runtime(io))
+ return 0;
+
/*
* disable SSI,
* and, wait idle state
--
2.26.1