Add a RISC-V architecture specific stub code that actually copies the
actual kernel image to a valid address and jump to it after boot services
are terminated. Enable UEFI related kernel configs as well for RISC-V.
Signed-off-by: Atish Patra <[email protected]>
---
arch/riscv/Kconfig | 20 ++++
arch/riscv/Makefile | 1 +
arch/riscv/configs/defconfig | 1 +
arch/riscv/include/asm/efi.h | 44 +++++++++
drivers/firmware/efi/Kconfig | 2 +-
drivers/firmware/efi/libstub/Makefile | 10 ++
drivers/firmware/efi/libstub/riscv-stub.c | 106 ++++++++++++++++++++++
7 files changed, 183 insertions(+), 1 deletion(-)
create mode 100644 arch/riscv/include/asm/efi.h
create mode 100644 drivers/firmware/efi/libstub/riscv-stub.c
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index f39e326a7a42..eb4f41c8f3ce 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -379,10 +379,30 @@ config CMDLINE_FORCE
endchoice
+config EFI_STUB
+ bool
+
+config EFI
+ bool "UEFI runtime support"
+ depends on OF
+ select LIBFDT
+ select UCS2_STRING
+ select EFI_PARAMS_FROM_FDT
+ select EFI_STUB
+ select EFI_GENERIC_STUB
+ default y
+ help
+ This option provides support for runtime services provided
+ by UEFI firmware (such as non-volatile variables, realtime
+ clock, and platform reset). A UEFI stub is also provided to
+ allow the kernel to be booted as an EFI application. This
+ is only useful on systems that have UEFI firmware.
+
endmenu
menu "Power management options"
source "kernel/power/Kconfig"
+source "drivers/firmware/Kconfig"
endmenu
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index fb6e37db836d..079435804d6d 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -80,6 +80,7 @@ head-y := arch/riscv/kernel/head.o
core-y += arch/riscv/
libs-y += arch/riscv/lib/
+core-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
PHONY += vdso_install
vdso_install:
diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index 4da4886246a4..ae69e12d306a 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -129,3 +129,4 @@ CONFIG_DEBUG_BLOCK_EXT_DEVT=y
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_MEMTEST=y
# CONFIG_SYSFS_SYSCALL is not set
+CONFIG_EFI=y
diff --git a/arch/riscv/include/asm/efi.h b/arch/riscv/include/asm/efi.h
new file mode 100644
index 000000000000..62d7d5eafed8
--- /dev/null
+++ b/arch/riscv/include/asm/efi.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ * Based on arch/arm64/include/asm/efi.h
+ */
+#ifndef _ASM_EFI_H
+#define _ASM_EFI_H
+
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/ptrace.h>
+#include <asm/tlbflush.h>
+
+#define VA_BITS_MIN 39
+
+/* on RISC-V, the FDT may be located anywhere in system RAM */
+static inline unsigned long efi_get_max_fdt_addr(unsigned long dram_base)
+{
+ return ULONG_MAX;
+}
+
+/* Load initrd at enough distance from DRAM start */
+static inline unsigned long efi_get_max_initrd_addr(unsigned long dram_base,
+ unsigned long image_addr)
+{
+ return dram_base + SZ_256M;
+}
+
+#define efi_bs_call(func, ...) efi_system_table()->boottime->func(__VA_ARGS__)
+#define efi_rt_call(func, ...) efi_system_table()->runtime->func(__VA_ARGS__)
+#define efi_is_native() (true)
+
+#define efi_table_attr(inst, attr) (inst->attr)
+
+#define efi_call_proto(inst, func, ...) inst->func(inst, ##__VA_ARGS__)
+
+#define alloc_screen_info(x...) (&screen_info)
+extern char stext_offset[];
+
+static inline void free_screen_info(struct screen_info *si)
+{
+}
+
+#endif /* _ASM_EFI_H */
diff --git a/drivers/firmware/efi/Kconfig b/drivers/firmware/efi/Kconfig
index 2a2b2b96a1dc..fcdc789d3f87 100644
--- a/drivers/firmware/efi/Kconfig
+++ b/drivers/firmware/efi/Kconfig
@@ -111,7 +111,7 @@ config EFI_GENERIC_STUB
config EFI_ARMSTUB_DTB_LOADER
bool "Enable the DTB loader"
- depends on EFI_GENERIC_STUB
+ depends on EFI_GENERIC_STUB && !RISCV
default y
help
Select this config option to add support for the dtb= command
diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile
index 0f57293d777e..eb365c55c0fe 100644
--- a/drivers/firmware/efi/libstub/Makefile
+++ b/drivers/firmware/efi/libstub/Makefile
@@ -22,6 +22,8 @@ cflags-$(CONFIG_ARM64) := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
cflags-$(CONFIG_ARM) := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
-fno-builtin -fpic \
$(call cc-option,-mno-single-pic-base)
+cflags-$(CONFIG_RISCV) := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
+ -fpic
cflags-$(CONFIG_EFI_GENERIC_STUB) += -I$(srctree)/scripts/dtc/libfdt
@@ -57,6 +59,7 @@ lib-$(CONFIG_EFI_GENERIC_STUB) += efi-stub.o fdt.o string.o \
lib-$(CONFIG_ARM) += arm32-stub.o
lib-$(CONFIG_ARM64) += arm64-stub.o
lib-$(CONFIG_X86) += x86-stub.o
+lib-$(CONFIG_RISCV) += riscv-stub.o
CFLAGS_arm32-stub.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
CFLAGS_arm64-stub.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
@@ -100,6 +103,13 @@ STUBCOPY_FLAGS-$(CONFIG_X86) += --rename-section .bss=.bss.efistub,load,alloc
STUBCOPY_RELOC-$(CONFIG_X86_32) := R_386_32
STUBCOPY_RELOC-$(CONFIG_X86_64) := R_X86_64_64
+# For RISC-V, we don't need anything special other than arm64. Keep all the
+# symbols in .init section and make sure that no absolute symbols references
+# doesn't exist.
+STUBCOPY_FLAGS-$(CONFIG_RISCV) += --prefix-alloc-sections=.init \
+ --prefix-symbols=__efistub_
+STUBCOPY_RELOC-$(CONFIG_RISCV) := R_RISCV_HI20
+
$(obj)/%.stub.o: $(obj)/%.o FORCE
$(call if_changed,stubcopy)
diff --git a/drivers/firmware/efi/libstub/riscv-stub.c b/drivers/firmware/efi/libstub/riscv-stub.c
new file mode 100644
index 000000000000..bd1d6fed8754
--- /dev/null
+++ b/drivers/firmware/efi/libstub/riscv-stub.c
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2013, 2014 Linaro Ltd; <[email protected]>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ *
+ * This file implements the EFI boot stub for the RISC-V kernel.
+ * Adapted from ARM64 version at drivers/firmware/efi/libstub/arm64-stub.c.
+ */
+
+#include <linux/efi.h>
+#include <linux/libfdt.h>
+#include <linux/libfdt_env.h>
+#include <asm/efi.h>
+#include <asm/sections.h>
+
+#include "efistub.h"
+/*
+ * RISC-V requires the kernel image to placed 2 MB aligned base for 64 bit and
+ * 4MB for 32 bit.
+ */
+#ifdef CONFIG_64BIT
+#define MIN_KIMG_ALIGN SZ_2M
+#else
+#define MIN_KIMG_ALIGN SZ_4M
+#endif
+
+typedef __attribute__((noreturn)) void (*jump_kernel_func)(unsigned int,
+ unsigned long);
+efi_status_t check_platform_features(void)
+{
+ return EFI_SUCCESS;
+}
+
+static u32 get_boot_hartid_from_fdt(unsigned long fdt)
+{
+ int chosen_node, len;
+ const fdt32_t *prop;
+
+ chosen_node = fdt_path_offset((void *)fdt, "/chosen");
+ if (chosen_node < 0)
+ return U32_MAX;
+ prop = fdt_getprop((void *)fdt, chosen_node, "boot-hartid", &len);
+ if (!prop || len != sizeof(u32))
+ return U32_MAX;
+
+ return fdt32_to_cpu(*prop);
+}
+
+/*
+ * Jump to real kernel here with following constraints.
+ * 1. MMU should be disabled.
+ * 2. a0 should contain hartid
+ * 3. a1 should DT address
+ */
+void __noreturn efi_enter_kernel(unsigned long entrypoint, unsigned long fdt,
+ unsigned long fdt_size)
+{
+ unsigned long kernel_entry = entrypoint + (unsigned long)stext_offset;
+ jump_kernel_func jump_kernel = (jump_kernel_func) kernel_entry;
+ u32 hartid = get_boot_hartid_from_fdt(fdt);
+
+ if (hartid == U32_MAX)
+ /* We can not use panic or BUG at this point */
+ __asm__ __volatile__ ("ebreak");
+ /* Disable MMU */
+ csr_write(CSR_SATP, 0);
+ jump_kernel(hartid, fdt);
+}
+
+efi_status_t handle_kernel_image(unsigned long *image_addr,
+ unsigned long *image_size,
+ unsigned long *reserve_addr,
+ unsigned long *reserve_size,
+ unsigned long dram_base,
+ efi_loaded_image_t *image)
+{
+ efi_status_t status;
+ unsigned long kernel_size = 0;
+ unsigned long preferred_addr;
+
+ kernel_size = _edata - _start;
+ *reserve_size = kernel_size + (_end - _edata);
+ *image_addr = (unsigned long)_start;
+
+ /*
+ * RISC-V kernel maps PAGE_OFFSET virtual address to the same physical
+ * address where kernel is booted. That's why kernel should boot from
+ * as low as possible to avoid wastage of memory. Currently, dram_base
+ * is occupied by the firmware. So the preferred address for kernel to
+ * boot is next aligned address. If preferred address is not available,
+ * relocate_kernel will fall back to efi_low_alloc_above to allocate
+ * lowest possible memory region as long as the address and size meets
+ * the alignment constraints.
+ */
+ preferred_addr = round_up(dram_base, MIN_KIMG_ALIGN) + MIN_KIMG_ALIGN;
+ status = efi_relocate_kernel(image_addr, kernel_size, *reserve_size,
+ preferred_addr, MIN_KIMG_ALIGN, dram_base);
+
+ if (status != EFI_SUCCESS) {
+ pr_efi_err("Failed to relocate kernel\n");
+ *reserve_size = 0;
+ return status;
+ }
+
+ return EFI_SUCCESS;
+}
--
2.24.0
On Mon, 20 Apr 2020 20:33:36 PDT (-0700), Atish Patra wrote:
> Add a RISC-V architecture specific stub code that actually copies the
> actual kernel image to a valid address and jump to it after boot services
> are terminated. Enable UEFI related kernel configs as well for RISC-V.
>
> Signed-off-by: Atish Patra <[email protected]>
> ---
> arch/riscv/Kconfig | 20 ++++
> arch/riscv/Makefile | 1 +
> arch/riscv/configs/defconfig | 1 +
> arch/riscv/include/asm/efi.h | 44 +++++++++
> drivers/firmware/efi/Kconfig | 2 +-
> drivers/firmware/efi/libstub/Makefile | 10 ++
> drivers/firmware/efi/libstub/riscv-stub.c | 106 ++++++++++++++++++++++
> 7 files changed, 183 insertions(+), 1 deletion(-)
> create mode 100644 arch/riscv/include/asm/efi.h
> create mode 100644 drivers/firmware/efi/libstub/riscv-stub.c
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index f39e326a7a42..eb4f41c8f3ce 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -379,10 +379,30 @@ config CMDLINE_FORCE
>
> endchoice
>
> +config EFI_STUB
> + bool
> +
> +config EFI
> + bool "UEFI runtime support"
> + depends on OF
> + select LIBFDT
> + select UCS2_STRING
> + select EFI_PARAMS_FROM_FDT
> + select EFI_STUB
> + select EFI_GENERIC_STUB
So I guess just "select RISCV_ISA_C" would be sufficient to make this work, but
I still feel flike an explicit "c.li" is saner.
> + default y
> + help
> + This option provides support for runtime services provided
> + by UEFI firmware (such as non-volatile variables, realtime
> + clock, and platform reset). A UEFI stub is also provided to
> + allow the kernel to be booted as an EFI application. This
> + is only useful on systems that have UEFI firmware.
> +
> endmenu
>
> menu "Power management options"
>
> source "kernel/power/Kconfig"
> +source "drivers/firmware/Kconfig"
>
> endmenu
> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> index fb6e37db836d..079435804d6d 100644
> --- a/arch/riscv/Makefile
> +++ b/arch/riscv/Makefile
> @@ -80,6 +80,7 @@ head-y := arch/riscv/kernel/head.o
> core-y += arch/riscv/
>
> libs-y += arch/riscv/lib/
> +core-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
>
> PHONY += vdso_install
> vdso_install:
> diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
> index 4da4886246a4..ae69e12d306a 100644
> --- a/arch/riscv/configs/defconfig
> +++ b/arch/riscv/configs/defconfig
> @@ -129,3 +129,4 @@ CONFIG_DEBUG_BLOCK_EXT_DEVT=y
> # CONFIG_RUNTIME_TESTING_MENU is not set
> CONFIG_MEMTEST=y
> # CONFIG_SYSFS_SYSCALL is not set
> +CONFIG_EFI=y
> diff --git a/arch/riscv/include/asm/efi.h b/arch/riscv/include/asm/efi.h
> new file mode 100644
> index 000000000000..62d7d5eafed8
> --- /dev/null
> +++ b/arch/riscv/include/asm/efi.h
> @@ -0,0 +1,44 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2020 Western Digital Corporation or its affiliates.
> + * Based on arch/arm64/include/asm/efi.h
> + */
> +#ifndef _ASM_EFI_H
> +#define _ASM_EFI_H
> +
> +#include <asm/io.h>
> +#include <asm/mmu_context.h>
> +#include <asm/ptrace.h>
> +#include <asm/tlbflush.h>
> +
> +#define VA_BITS_MIN 39
I don't see this actually being used, but if it's releant to some macro that
I'm missing then EFI support should depend on rv64.
> +
> +/* on RISC-V, the FDT may be located anywhere in system RAM */
> +static inline unsigned long efi_get_max_fdt_addr(unsigned long dram_base)
> +{
> + return ULONG_MAX;
> +}
> +
> +/* Load initrd at enough distance from DRAM start */
> +static inline unsigned long efi_get_max_initrd_addr(unsigned long dram_base,
> + unsigned long image_addr)
> +{
> + return dram_base + SZ_256M;
> +}
> +
> +#define efi_bs_call(func, ...) efi_system_table()->boottime->func(__VA_ARGS__)
> +#define efi_rt_call(func, ...) efi_system_table()->runtime->func(__VA_ARGS__)
> +#define efi_is_native() (true)
> +
> +#define efi_table_attr(inst, attr) (inst->attr)
> +
> +#define efi_call_proto(inst, func, ...) inst->func(inst, ##__VA_ARGS__)
> +
> +#define alloc_screen_info(x...) (&screen_info)
> +extern char stext_offset[];
> +
> +static inline void free_screen_info(struct screen_info *si)
> +{
> +}
> +
> +#endif /* _ASM_EFI_H */
> diff --git a/drivers/firmware/efi/Kconfig b/drivers/firmware/efi/Kconfig
> index 2a2b2b96a1dc..fcdc789d3f87 100644
> --- a/drivers/firmware/efi/Kconfig
> +++ b/drivers/firmware/efi/Kconfig
> @@ -111,7 +111,7 @@ config EFI_GENERIC_STUB
>
> config EFI_ARMSTUB_DTB_LOADER
> bool "Enable the DTB loader"
> - depends on EFI_GENERIC_STUB
> + depends on EFI_GENERIC_STUB && !RISCV
> default y
> help
> Select this config option to add support for the dtb= command
> diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile
> index 0f57293d777e..eb365c55c0fe 100644
> --- a/drivers/firmware/efi/libstub/Makefile
> +++ b/drivers/firmware/efi/libstub/Makefile
> @@ -22,6 +22,8 @@ cflags-$(CONFIG_ARM64) := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
> cflags-$(CONFIG_ARM) := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
> -fno-builtin -fpic \
> $(call cc-option,-mno-single-pic-base)
> +cflags-$(CONFIG_RISCV) := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
> + -fpic
>
> cflags-$(CONFIG_EFI_GENERIC_STUB) += -I$(srctree)/scripts/dtc/libfdt
>
> @@ -57,6 +59,7 @@ lib-$(CONFIG_EFI_GENERIC_STUB) += efi-stub.o fdt.o string.o \
> lib-$(CONFIG_ARM) += arm32-stub.o
> lib-$(CONFIG_ARM64) += arm64-stub.o
> lib-$(CONFIG_X86) += x86-stub.o
> +lib-$(CONFIG_RISCV) += riscv-stub.o
> CFLAGS_arm32-stub.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
> CFLAGS_arm64-stub.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
>
> @@ -100,6 +103,13 @@ STUBCOPY_FLAGS-$(CONFIG_X86) += --rename-section .bss=.bss.efistub,load,alloc
> STUBCOPY_RELOC-$(CONFIG_X86_32) := R_386_32
> STUBCOPY_RELOC-$(CONFIG_X86_64) := R_X86_64_64
>
> +# For RISC-V, we don't need anything special other than arm64. Keep all the
> +# symbols in .init section and make sure that no absolute symbols references
> +# doesn't exist.
> +STUBCOPY_FLAGS-$(CONFIG_RISCV) += --prefix-alloc-sections=.init \
> + --prefix-symbols=__efistub_
> +STUBCOPY_RELOC-$(CONFIG_RISCV) := R_RISCV_HI20
> +
> $(obj)/%.stub.o: $(obj)/%.o FORCE
> $(call if_changed,stubcopy)
>
> diff --git a/drivers/firmware/efi/libstub/riscv-stub.c b/drivers/firmware/efi/libstub/riscv-stub.c
> new file mode 100644
> index 000000000000..bd1d6fed8754
> --- /dev/null
> +++ b/drivers/firmware/efi/libstub/riscv-stub.c
> @@ -0,0 +1,106 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2013, 2014 Linaro Ltd; <[email protected]>
> + * Copyright (C) 2020 Western Digital Corporation or its affiliates.
> + *
> + * This file implements the EFI boot stub for the RISC-V kernel.
> + * Adapted from ARM64 version at drivers/firmware/efi/libstub/arm64-stub.c.
> + */
> +
> +#include <linux/efi.h>
> +#include <linux/libfdt.h>
> +#include <linux/libfdt_env.h>
> +#include <asm/efi.h>
> +#include <asm/sections.h>
> +
> +#include "efistub.h"
> +/*
> + * RISC-V requires the kernel image to placed 2 MB aligned base for 64 bit and
> + * 4MB for 32 bit.
> + */
> +#ifdef CONFIG_64BIT
> +#define MIN_KIMG_ALIGN SZ_2M
> +#else
> +#define MIN_KIMG_ALIGN SZ_4M
> +#endif
> +
> +typedef __attribute__((noreturn)) void (*jump_kernel_func)(unsigned int,
> + unsigned long);
> +efi_status_t check_platform_features(void)
> +{
> + return EFI_SUCCESS;
> +}
> +
> +static u32 get_boot_hartid_from_fdt(unsigned long fdt)
> +{
> + int chosen_node, len;
> + const fdt32_t *prop;
> +
> + chosen_node = fdt_path_offset((void *)fdt, "/chosen");
> + if (chosen_node < 0)
> + return U32_MAX;
> + prop = fdt_getprop((void *)fdt, chosen_node, "boot-hartid", &len);
> + if (!prop || len != sizeof(u32))
> + return U32_MAX;
> +
> + return fdt32_to_cpu(*prop);
> +}
> +
> +/*
> + * Jump to real kernel here with following constraints.
> + * 1. MMU should be disabled.
> + * 2. a0 should contain hartid
> + * 3. a1 should DT address
> + */
> +void __noreturn efi_enter_kernel(unsigned long entrypoint, unsigned long fdt,
> + unsigned long fdt_size)
> +{
> + unsigned long kernel_entry = entrypoint + (unsigned long)stext_offset;
> + jump_kernel_func jump_kernel = (jump_kernel_func) kernel_entry;
> + u32 hartid = get_boot_hartid_from_fdt(fdt);
> +
> + if (hartid == U32_MAX)
> + /* We can not use panic or BUG at this point */
> + __asm__ __volatile__ ("ebreak");
> + /* Disable MMU */
> + csr_write(CSR_SATP, 0);
> + jump_kernel(hartid, fdt);
> +}
> +
> +efi_status_t handle_kernel_image(unsigned long *image_addr,
> + unsigned long *image_size,
> + unsigned long *reserve_addr,
> + unsigned long *reserve_size,
> + unsigned long dram_base,
> + efi_loaded_image_t *image)
> +{
> + efi_status_t status;
> + unsigned long kernel_size = 0;
> + unsigned long preferred_addr;
> +
> + kernel_size = _edata - _start;
> + *reserve_size = kernel_size + (_end - _edata);
> + *image_addr = (unsigned long)_start;
> +
> + /*
> + * RISC-V kernel maps PAGE_OFFSET virtual address to the same physical
> + * address where kernel is booted. That's why kernel should boot from
> + * as low as possible to avoid wastage of memory. Currently, dram_base
> + * is occupied by the firmware. So the preferred address for kernel to
> + * boot is next aligned address. If preferred address is not available,
> + * relocate_kernel will fall back to efi_low_alloc_above to allocate
> + * lowest possible memory region as long as the address and size meets
> + * the alignment constraints.
> + */
> + preferred_addr = round_up(dram_base, MIN_KIMG_ALIGN) + MIN_KIMG_ALIGN;
> + status = efi_relocate_kernel(image_addr, kernel_size, *reserve_size,
> + preferred_addr, MIN_KIMG_ALIGN, dram_base);
> +
> + if (status != EFI_SUCCESS) {
> + pr_efi_err("Failed to relocate kernel\n");
> + *reserve_size = 0;
> + return status;
> + }
> +
> + return EFI_SUCCESS;
> +}
On Tue, 2020-04-21 at 13:08 -0700, Palmer Dabbelt wrote:
> On Mon, 20 Apr 2020 20:33:36 PDT (-0700), Atish Patra wrote:
> > Add a RISC-V architecture specific stub code that actually copies
> > the
> > actual kernel image to a valid address and jump to it after boot
> > services
> > are terminated. Enable UEFI related kernel configs as well for
> > RISC-V.
> >
> > Signed-off-by: Atish Patra <[email protected]>
> > ---
> > arch/riscv/Kconfig | 20 ++++
> > arch/riscv/Makefile | 1 +
> > arch/riscv/configs/defconfig | 1 +
> > arch/riscv/include/asm/efi.h | 44 +++++++++
> > drivers/firmware/efi/Kconfig | 2 +-
> > drivers/firmware/efi/libstub/Makefile | 10 ++
> > drivers/firmware/efi/libstub/riscv-stub.c | 106
> > ++++++++++++++++++++++
> > 7 files changed, 183 insertions(+), 1 deletion(-)
> > create mode 100644 arch/riscv/include/asm/efi.h
> > create mode 100644 drivers/firmware/efi/libstub/riscv-stub.c
> >
> > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> > index f39e326a7a42..eb4f41c8f3ce 100644
> > --- a/arch/riscv/Kconfig
> > +++ b/arch/riscv/Kconfig
> > @@ -379,10 +379,30 @@ config CMDLINE_FORCE
> >
> > endchoice
> >
> > +config EFI_STUB
> > + bool
> > +
> > +config EFI
> > + bool "UEFI runtime support"
> > + depends on OF
> > + select LIBFDT
> > + select UCS2_STRING
> > + select EFI_PARAMS_FROM_FDT
> > + select EFI_STUB
> > + select EFI_GENERIC_STUB
>
> So I guess just "select RISCV_ISA_C" would be sufficient to make this
> work, but
> I still feel flike an explicit "c.li" is saner.
>
will fix it.
> > + default y
> > + help
> > + This option provides support for runtime services provided
> > + by UEFI firmware (such as non-volatile variables, realtime
> > + clock, and platform reset). A UEFI stub is also provided
> > to
> > + allow the kernel to be booted as an EFI application. This
> > + is only useful on systems that have UEFI firmware.
> > +
> > endmenu
> >
> > menu "Power management options"
> >
> > source "kernel/power/Kconfig"
> > +source "drivers/firmware/Kconfig"
> >
> > endmenu
> > diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> > index fb6e37db836d..079435804d6d 100644
> > --- a/arch/riscv/Makefile
> > +++ b/arch/riscv/Makefile
> > @@ -80,6 +80,7 @@ head-y := arch/riscv/kernel/head.o
> > core-y += arch/riscv/
> >
> > libs-y += arch/riscv/lib/
> > +core-$(CONFIG_EFI_STUB) +=
> > $(objtree)/drivers/firmware/efi/libstub/lib.a
> >
> > PHONY += vdso_install
> > vdso_install:
> > diff --git a/arch/riscv/configs/defconfig
> > b/arch/riscv/configs/defconfig
> > index 4da4886246a4..ae69e12d306a 100644
> > --- a/arch/riscv/configs/defconfig
> > +++ b/arch/riscv/configs/defconfig
> > @@ -129,3 +129,4 @@ CONFIG_DEBUG_BLOCK_EXT_DEVT=y
> > # CONFIG_RUNTIME_TESTING_MENU is not set
> > CONFIG_MEMTEST=y
> > # CONFIG_SYSFS_SYSCALL is not set
> > +CONFIG_EFI=y
> > diff --git a/arch/riscv/include/asm/efi.h
> > b/arch/riscv/include/asm/efi.h
> > new file mode 100644
> > index 000000000000..62d7d5eafed8
> > --- /dev/null
> > +++ b/arch/riscv/include/asm/efi.h
> > @@ -0,0 +1,44 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * Copyright (C) 2020 Western Digital Corporation or its
> > affiliates.
> > + * Based on arch/arm64/include/asm/efi.h
> > + */
> > +#ifndef _ASM_EFI_H
> > +#define _ASM_EFI_H
> > +
> > +#include <asm/io.h>
> > +#include <asm/mmu_context.h>
> > +#include <asm/ptrace.h>
> > +#include <asm/tlbflush.h>
> > +
> > +#define VA_BITS_MIN 39
>
> I don't see this actually being used, but if it's releant to some
> macro that
> I'm missing then EFI support should depend on rv64.
>
Yeah. This was a left over from the previous patch. Thanks for pointing
out. I will remove it.
> > +
> > +/* on RISC-V, the FDT may be located anywhere in system RAM */
> > +static inline unsigned long efi_get_max_fdt_addr(unsigned long
> > dram_base)
> > +{
> > + return ULONG_MAX;
> > +}
> > +
> > +/* Load initrd at enough distance from DRAM start */
> > +static inline unsigned long efi_get_max_initrd_addr(unsigned long
> > dram_base,
> > + unsigned long
> > image_addr)
> > +{
> > + return dram_base + SZ_256M;
> > +}
> > +
> > +#define efi_bs_call(func, ...) efi_system_table()->boottime-
> > >func(__VA_ARGS__)
> > +#define efi_rt_call(func, ...) efi_system_table()->runtime-
> > >func(__VA_ARGS__)
> > +#define efi_is_native() (true)
> > +
> > +#define efi_table_attr(inst, attr) (inst->attr)
> > +
> > +#define efi_call_proto(inst, func, ...) inst->func(inst,
> > ##__VA_ARGS__)
> > +
> > +#define alloc_screen_info(x...) (&screen_info)
> > +extern char stext_offset[];
> > +
> > +static inline void free_screen_info(struct screen_info *si)
> > +{
> > +}
> > +
> > +#endif /* _ASM_EFI_H */
> > diff --git a/drivers/firmware/efi/Kconfig
> > b/drivers/firmware/efi/Kconfig
> > index 2a2b2b96a1dc..fcdc789d3f87 100644
> > --- a/drivers/firmware/efi/Kconfig
> > +++ b/drivers/firmware/efi/Kconfig
> > @@ -111,7 +111,7 @@ config EFI_GENERIC_STUB
> >
> > config EFI_ARMSTUB_DTB_LOADER
> > bool "Enable the DTB loader"
> > - depends on EFI_GENERIC_STUB
> > + depends on EFI_GENERIC_STUB && !RISCV
> > default y
> > help
> > Select this config option to add support for the dtb= command
> > diff --git a/drivers/firmware/efi/libstub/Makefile
> > b/drivers/firmware/efi/libstub/Makefile
> > index 0f57293d777e..eb365c55c0fe 100644
> > --- a/drivers/firmware/efi/libstub/Makefile
> > +++ b/drivers/firmware/efi/libstub/Makefile
> > @@ -22,6 +22,8 @@ cflags-$(CONFIG_ARM64) := $(subst
> > $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
> > cflags-$(CONFIG_ARM) := $(subst
> > $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
> > -fno-builtin -fpic \
> > $(call cc-option,-mno-single-pic-
> > base)
> > +cflags-$(CONFIG_RISCV) := $(subst
> > $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
> > + -fpic
> >
> > cflags-$(CONFIG_EFI_GENERIC_STUB) +=
> > -I$(srctree)/scripts/dtc/libfdt
> >
> > @@ -57,6 +59,7 @@ lib-$(CONFIG_EFI_GENERIC_STUB) += efi-stub.o
> > fdt.o string.o \
> > lib-$(CONFIG_ARM) += arm32-stub.o
> > lib-$(CONFIG_ARM64) += arm64-stub.o
> > lib-$(CONFIG_X86) += x86-stub.o
> > +lib-$(CONFIG_RISCV) += riscv-stub.o
> > CFLAGS_arm32-stub.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
> > CFLAGS_arm64-stub.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
> >
> > @@ -100,6 +103,13 @@ STUBCOPY_FLAGS-$(CONFIG_X86) += --rename-
> > section .bss=.bss.efistub,load,alloc
> > STUBCOPY_RELOC-$(CONFIG_X86_32) := R_386_32
> > STUBCOPY_RELOC-$(CONFIG_X86_64) := R_X86_64_64
> >
> > +# For RISC-V, we don't need anything special other than arm64.
> > Keep all the
> > +# symbols in .init section and make sure that no absolute symbols
> > references
> > +# doesn't exist.
> > +STUBCOPY_FLAGS-$(CONFIG_RISCV) += --prefix-alloc-
> > sections=.init \
> > + --prefix-symbols=__efistub_
> > +STUBCOPY_RELOC-$(CONFIG_RISCV) := R_RISCV_HI20
> > +
> > $(obj)/%.stub.o: $(obj)/%.o FORCE
> > $(call if_changed,stubcopy)
> >
> > diff --git a/drivers/firmware/efi/libstub/riscv-stub.c
> > b/drivers/firmware/efi/libstub/riscv-stub.c
> > new file mode 100644
> > index 000000000000..bd1d6fed8754
> > --- /dev/null
> > +++ b/drivers/firmware/efi/libstub/riscv-stub.c
> > @@ -0,0 +1,106 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2013, 2014 Linaro Ltd; <[email protected]>
> > + * Copyright (C) 2020 Western Digital Corporation or its
> > affiliates.
> > + *
> > + * This file implements the EFI boot stub for the RISC-V kernel.
> > + * Adapted from ARM64 version at
> > drivers/firmware/efi/libstub/arm64-stub.c.
> > + */
> > +
> > +#include <linux/efi.h>
> > +#include <linux/libfdt.h>
> > +#include <linux/libfdt_env.h>
> > +#include <asm/efi.h>
> > +#include <asm/sections.h>
> > +
> > +#include "efistub.h"
> > +/*
> > + * RISC-V requires the kernel image to placed 2 MB aligned base
> > for 64 bit and
> > + * 4MB for 32 bit.
> > + */
> > +#ifdef CONFIG_64BIT
> > +#define MIN_KIMG_ALIGN SZ_2M
> > +#else
> > +#define MIN_KIMG_ALIGN SZ_4M
> > +#endif
> > +
> > +typedef __attribute__((noreturn)) void
> > (*jump_kernel_func)(unsigned int,
> > + unsigned
> > long);
> > +efi_status_t check_platform_features(void)
> > +{
> > + return EFI_SUCCESS;
> > +}
> > +
> > +static u32 get_boot_hartid_from_fdt(unsigned long fdt)
> > +{
> > + int chosen_node, len;
> > + const fdt32_t *prop;
> > +
> > + chosen_node = fdt_path_offset((void *)fdt, "/chosen");
> > + if (chosen_node < 0)
> > + return U32_MAX;
> > + prop = fdt_getprop((void *)fdt, chosen_node, "boot-hartid",
> > &len);
> > + if (!prop || len != sizeof(u32))
> > + return U32_MAX;
> > +
> > + return fdt32_to_cpu(*prop);
> > +}
> > +
> > +/*
> > + * Jump to real kernel here with following constraints.
> > + * 1. MMU should be disabled.
> > + * 2. a0 should contain hartid
> > + * 3. a1 should DT address
> > + */
> > +void __noreturn efi_enter_kernel(unsigned long entrypoint,
> > unsigned long fdt,
> > + unsigned long fdt_size)
> > +{
> > + unsigned long kernel_entry = entrypoint + (unsigned
> > long)stext_offset;
> > + jump_kernel_func jump_kernel = (jump_kernel_func) kernel_entry;
> > + u32 hartid = get_boot_hartid_from_fdt(fdt);
> > +
> > + if (hartid == U32_MAX)
> > + /* We can not use panic or BUG at this point */
> > + __asm__ __volatile__ ("ebreak");
> > + /* Disable MMU */
> > + csr_write(CSR_SATP, 0);
> > + jump_kernel(hartid, fdt);
> > +}
> > +
> > +efi_status_t handle_kernel_image(unsigned long *image_addr,
> > + unsigned long *image_size,
> > + unsigned long *reserve_addr,
> > + unsigned long *reserve_size,
> > + unsigned long dram_base,
> > + efi_loaded_image_t *image)
> > +{
> > + efi_status_t status;
> > + unsigned long kernel_size = 0;
> > + unsigned long preferred_addr;
> > +
> > + kernel_size = _edata - _start;
> > + *reserve_size = kernel_size + (_end - _edata);
> > + *image_addr = (unsigned long)_start;
> > +
> > + /*
> > + * RISC-V kernel maps PAGE_OFFSET virtual address to the same
> > physical
> > + * address where kernel is booted. That's why kernel should
> > boot from
> > + * as low as possible to avoid wastage of memory. Currently,
> > dram_base
> > + * is occupied by the firmware. So the preferred address for
> > kernel to
> > + * boot is next aligned address. If preferred address is not
> > available,
> > + * relocate_kernel will fall back to efi_low_alloc_above to
> > allocate
> > + * lowest possible memory region as long as the address and
> > size meets
> > + * the alignment constraints.
> > + */
> > + preferred_addr = round_up(dram_base, MIN_KIMG_ALIGN) +
> > MIN_KIMG_ALIGN;
> > + status = efi_relocate_kernel(image_addr, kernel_size,
> > *reserve_size,
> > + preferred_addr, MIN_KIMG_ALIGN,
> > dram_base);
> > +
> > + if (status != EFI_SUCCESS) {
> > + pr_efi_err("Failed to relocate kernel\n");
> > + *reserve_size = 0;
> > + return status;
> > + }
> > +
> > + return EFI_SUCCESS;
> > +}
--
Regards,
Atish