This is the start of the stable review cycle for the 5.4.37 release.
There are 83 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sun, 03 May 2020 13:12:02 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.37-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.4.37-rc1
Olivier Moysan <[email protected]>
ASoC: stm32: spdifrx: fix regmap status check
Pierre-Louis Bossart <[email protected]>
ASoC: soc-core: disable route checks for legacy devices
Ritesh Harjani <[email protected]>
ext4: check for non-zero journal inum in ext4_calculate_overhead
Yuval Basson <[email protected]>
qed: Fix use after free in qed_chain_free
Eric Dumazet <[email protected]>
net: use indirect call wrappers for skb_copy_datagram_iter()
Ayush Sawal <[email protected]>
Crypto: chelsio - Fixes a hang issue during driver registration
Yuval Basson <[email protected]>
qed: Fix race condition between scheduling and destroying the slowpath workqueue
Eugene Syromiatnikov <[email protected]>
taprio: do not use BIT() in TCA_TAPRIO_ATTR_FLAG_* definitions
Sascha Hauer <[email protected]>
hwmon: (jc42) Fix name to have no illegal characters
John Garry <[email protected]>
blk-mq: Put driver tag in blk_mq_dispatch_rq_list() when no budget
Theodore Ts'o <[email protected]>
ext4: convert BUG_ON's to WARN_ON's in mballoc.c
Theodore Ts'o <[email protected]>
ext4: increase wait time needed before reuse of deleted inode numbers
yangerkun <[email protected]>
ext4: use matching invalidatepage in ext4_writepage
Fangrui Song <[email protected]>
arm64: Delete the space separator in __emit_inst
Tamizh chelvam <[email protected]>
mac80211: fix channel switch trigger from unknown mesh peer
Atsushi Nemoto <[email protected]>
net: stmmac: socfpga: Allow all RGMII modes
Hui Wang <[email protected]>
ALSA: hda: call runtime_allow() for all hda controllers
Juergen Gross <[email protected]>
xen/xenbus: ensure xenbus_map_ring_valloc() returns proper grant status
Josh Poimboeuf <[email protected]>
objtool: Support Clang non-section symbols in ORC dump
Josh Poimboeuf <[email protected]>
objtool: Fix CONFIG_UBSAN_TRAP unreachable warnings
Bodo Stroesser <[email protected]>
scsi: target: tcmu: reset_ring should reset TCMU_DEV_BIT_BROKEN
Bodo Stroesser <[email protected]>
scsi: target: fix PR IN / READ FULL STATUS for FC
Roy Spliet <[email protected]>
ALSA: hda: Explicitly permit using autosuspend if runtime PM is supported
Takashi Iwai <[email protected]>
ALSA: hda: Keep the controller initialization even if no codecs found
Takashi Iwai <[email protected]>
ALSA: hda: Release resources at error in delayed probe
Darrick J. Wong <[email protected]>
xfs: fix partially uninitialized structure in xfs_reflink_remap_extent
David Howells <[email protected]>
afs: Fix length of dump of bad YFSFetchStatus record
Zhiqiang Liu <[email protected]>
signal: check sig before setting info in kill_pid_usb_asyncio
Olaf Hering <[email protected]>
x86: hyperv: report value of misc_features
Martin Fuzzey <[email protected]>
net: fec: set GPR bit on suspend by DT configuration.
Jeremy Cline <[email protected]>
libbpf: Initialize *nl_pid so gcc 10 is happy
Luke Nelson <[email protected]>
bpf, x86: Fix encoding for lower 8-bit registers in BPF_STX BPF_B
Eric Biggers <[email protected]>
xfs: clear PF_MEMALLOC before exiting xfsaild thread
Yang Shi <[email protected]>
mm: shmem: disable interrupt when acquiring info->lock in userfaultfd_copy path
Wang YanQing <[email protected]>
bpf, x86_32: Fix logic error in BPF_LDX zero-extension
Luke Nelson <[email protected]>
bpf, x86_32: Fix clobbering of dst for BPF_JSET
Luke Nelson <[email protected]>
bpf, x86_32: Fix incorrect encoding in BPF_LDX zero-extension
Vitor Massaru Iha <[email protected]>
um: ensure `make ARCH=um mrproper` removes arch/$(SUBARCH)/include/generated/
Waiman Long <[email protected]>
blk-iocost: Fix error on iocost_ioc_vrate_adj
Kai-Heng Feng <[email protected]>
PM: sleep: core: Switch back to async_schedule_dev()
Hillf Danton <[email protected]>
netfilter: nat: fix error handling upon registering inet hook
Ian Rogers <[email protected]>
perf/core: fix parent pid/tid in task exit events
Quentin Perret <[email protected]>
sched/core: Fix reset-on-fork from RT with uclamp
Niklas Schnelle <[email protected]>
net/mlx5: Fix failing fw tracer allocation on s390
Niklas Schnelle <[email protected]>
s390/pci: do not set affinity for floating irqs
Toke Høiland-Jørgensen <[email protected]>
cpumap: Avoid warning when CONFIG_DEBUG_PER_CPU_MAPS is enabled
Nicolas Saenz Julienne <[email protected]>
ARM: dts: bcm283x: Disable dsi0 node
Bjorn Helgaas <[email protected]>
PCI: Move Apex Edge TPU class quirk to fix BAR assignment
Raymond Pang <[email protected]>
PCI: Add ACS quirk for Zhaoxin Root/Downstream Ports
Raymond Pang <[email protected]>
PCI: Add Zhaoxin Vendor ID
Bjorn Helgaas <[email protected]>
PCI: Unify ACS quirk desired vs provided checking
Bjorn Helgaas <[email protected]>
PCI: Make ACS quirk implementations more uniform
Raymond Pang <[email protected]>
PCI: Add ACS quirk for Zhaoxin multi-function devices
Kai-Heng Feng <[email protected]>
PCI: Avoid ASMedia XHCI USB PME# from D0 defect
Zhu Yanjun <[email protected]>
net/mlx5e: Get the latest values from counters in switchdev mode
Maxim Mikityanskiy <[email protected]>
net/mlx5e: Don't trigger IRQ multiple times on XSK wakeup to avoid WQ overruns
Chuck Lever <[email protected]>
svcrdma: Fix leak of svc_rdma_recv_ctxt objects
Chuck Lever <[email protected]>
svcrdma: Fix trace point use-after-free race
Brian Foster <[email protected]>
xfs: acquire superblock freeze protection on eofblocks scans
Jason Gunthorpe <[email protected]>
net/cxgb4: Check the return from t4_query_params properly
David Howells <[email protected]>
rxrpc: Fix DATA Tx to disable nofrag for UDP on AF_INET6 socket
Wolfram Sang <[email protected]>
i2c: altera: use proper variable to hold errno
Jann Horn <[email protected]>
bpf: Forbid XADD on spilled pointers for unprivileged users
Vasily Averin <[email protected]>
nfsd: memory corruption in nfsd4_lock()
Arnd Bergmann <[email protected]>
drivers: soc: xilinx: fix firmware driver Kconfig dependency
Shengjiu Wang <[email protected]>
ASoC: wm8960: Fix wrong clock after suspend & resume
Jerome Brunet <[email protected]>
ASoC: meson: axg-card: fix codec-to-codec link setup
Philipp Puschmann <[email protected]>
ASoC: tas571x: disable regulators on failed probe
Stephan Gerhold <[email protected]>
ASoC: q6dsp6: q6afe-dai: add missing channels to MI2S DAIs
Philipp Rudo <[email protected]>
s390/ftrace: fix potential crashes when switching tracers
Syed Nayyar Waris <[email protected]>
counter: 104-quad-8: Add lock guards - generic interface
Al Viro <[email protected]>
propagate_one(): mnt_set_mountpoint() needs mount_lock
YueHaibing <[email protected]>
iio:ad7797: Use correct attribute_group
David Howells <[email protected]>
afs: Fix to actually set AFS_SERVER_FL_HAVE_EPOCH
David Howells <[email protected]>
afs: Make record checking use TASK_UNINTERRUPTIBLE when appropriate
Cristian Birsan <[email protected]>
usb: gadget: udc: atmel: Fix vbus disconnect handling
Nathan Chancellor <[email protected]>
usb: gadget: udc: bdc: Remove unnecessary NULL checks in bdc_req_complete
Masahiro Yamada <[email protected]>
kbuild: fix DT binding schema rule again to avoid needless rebuilds
Thinh Nguyen <[email protected]>
usb: dwc3: gadget: Do link recovery for SS and SSP
Olivier Moysan <[email protected]>
ASoC: stm32: sai: fix sai probe
Sergey Senozhatsky <[email protected]>
printk: queue wake_up_klogd irq_work only if per-CPU areas are ready
Richard Weinberger <[email protected]>
ubifs: Fix ubifs_tnc_lookup() usage in do_kill_orphans()
Clement Leger <[email protected]>
remoteproc: Fix wrong rvring index computation
-------------
Diffstat:
Makefile | 4 +-
arch/arm/boot/dts/bcm283x.dtsi | 1 +
arch/arm64/include/asm/sysreg.h | 4 +-
arch/s390/kernel/diag.c | 2 +-
arch/s390/kernel/smp.c | 4 +-
arch/s390/kernel/trace.c | 2 +-
arch/s390/pci/pci_irq.c | 5 +-
arch/um/Makefile | 1 +
arch/x86/kernel/cpu/mshyperv.c | 4 +-
arch/x86/net/bpf_jit_comp.c | 18 +-
arch/x86/net/bpf_jit_comp32.c | 28 ++-
block/blk-iocost.c | 4 +-
block/blk-mq.c | 4 +-
drivers/base/power/main.c | 2 +-
drivers/counter/104-quad-8.c | 194 +++++++++++++++++----
drivers/crypto/chelsio/chcr_core.c | 2 -
drivers/hwmon/jc42.c | 2 +-
drivers/i2c/busses/i2c-altera.c | 9 +-
drivers/iio/adc/ad7793.c | 2 +-
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 +-
drivers/net/ethernet/freescale/fec.h | 7 +
drivers/net/ethernet/freescale/fec_main.c | 149 +++++++++++++---
.../ethernet/mellanox/mlx5/core/diag/fw_tracer.c | 6 +-
drivers/net/ethernet/mellanox/mlx5/core/en.h | 3 +-
.../net/ethernet/mellanox/mlx5/core/en/xsk/tx.c | 3 +
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 7 +-
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 8 +-
drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c | 6 +-
drivers/net/ethernet/qlogic/qed/qed_dev.c | 38 ++--
drivers/net/ethernet/qlogic/qed/qed_main.c | 13 +-
.../net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 2 +
drivers/pci/quirks.c | 143 +++++++++++----
drivers/remoteproc/remoteproc_core.c | 2 +-
drivers/soc/xilinx/Kconfig | 4 +-
drivers/staging/gasket/apex_driver.c | 7 -
drivers/target/target_core_fabric_lib.c | 2 +-
drivers/target/target_core_user.c | 1 +
drivers/usb/dwc3/gadget.c | 8 +-
drivers/usb/gadget/udc/atmel_usba_udc.c | 4 +-
drivers/usb/gadget/udc/bdc/bdc_ep.c | 2 +-
drivers/xen/xenbus/xenbus_client.c | 9 +-
fs/afs/cmservice.c | 2 +-
fs/afs/internal.h | 2 +-
fs/afs/rotate.c | 6 +-
fs/afs/server.c | 7 +-
fs/afs/volume.c | 8 +-
fs/afs/yfsclient.c | 6 +-
fs/ext4/ialloc.c | 2 +-
fs/ext4/inode.c | 2 +-
fs/ext4/mballoc.c | 6 +-
fs/ext4/super.c | 3 +-
fs/nfsd/nfs4state.c | 2 +
fs/pnode.c | 9 +-
fs/ubifs/orphan.c | 4 +-
fs/xfs/xfs_icache.c | 10 ++
fs/xfs/xfs_ioctl.c | 5 +-
fs/xfs/xfs_reflink.c | 1 +
fs/xfs/xfs_trans_ail.c | 4 +-
include/linux/pci_ids.h | 2 +
include/linux/printk.h | 5 -
include/linux/qed/qed_chain.h | 24 ++-
include/linux/sunrpc/svc_rdma.h | 1 +
include/sound/soc.h | 1 +
include/trace/events/iocost.h | 6 +-
include/trace/events/rpcrdma.h | 50 ++++--
include/uapi/linux/pkt_sched.h | 4 +-
init/main.c | 1 -
kernel/bpf/cpumap.c | 2 +-
kernel/bpf/verifier.c | 28 ++-
kernel/events/core.c | 13 +-
kernel/printk/internal.h | 5 +
kernel/printk/printk.c | 34 ++++
kernel/printk/printk_safe.c | 11 +-
kernel/sched/core.c | 9 +-
kernel/signal.c | 6 +-
mm/shmem.c | 4 +-
net/core/datagram.c | 14 +-
net/mac80211/mesh.c | 11 +-
net/netfilter/nf_nat_proto.c | 4 +-
net/rxrpc/local_object.c | 9 -
net/rxrpc/output.c | 44 ++---
net/sunrpc/svc_xprt.c | 3 -
net/sunrpc/svcsock.c | 4 +
net/sunrpc/xprtrdma/svc_rdma_recvfrom.c | 22 +++
net/sunrpc/xprtrdma/svc_rdma_rw.c | 3 +-
net/sunrpc/xprtrdma/svc_rdma_sendto.c | 29 ++-
net/sunrpc/xprtrdma/svc_rdma_transport.c | 5 -
scripts/Makefile.lib | 2 +-
sound/pci/hda/hda_intel.c | 46 +++--
sound/pci/hda/hda_intel.h | 1 +
sound/soc/codecs/tas571x.c | 20 ++-
sound/soc/codecs/wm8960.c | 3 +-
sound/soc/meson/axg-card.c | 4 +-
sound/soc/qcom/qdsp6/q6afe-dai.c | 16 ++
sound/soc/soc-core.c | 28 ++-
sound/soc/stm/stm32_sai_sub.c | 12 +-
sound/soc/stm/stm32_spdifrx.c | 2 +
tools/lib/bpf/netlink.c | 4 +-
tools/objtool/check.c | 17 +-
tools/objtool/orc_dump.c | 44 +++--
.../selftests/bpf/verifier/value_illegal_alu.c | 1 +
101 files changed, 917 insertions(+), 434 deletions(-)
From: Martin Fuzzey <[email protected]>
[ Upstream commit da722186f6549d752ea5b5fbc18111833c81a133 ]
On some SoCs, such as the i.MX6, it is necessary to set a bit
in the SoC level GPR register before suspending for wake on lan
to work.
The fec platform callback sleep_mode_enable was intended to allow this
but the platform implementation was NAK'd back in 2015 [1]
This means that, currently, wake on lan is broken on mainline for
the i.MX6 at least.
So implement the required bit setting in the fec driver by itself
by adding a new optional DT property indicating the GPR register
and adding the offset and bit information to the driver.
[1] https://www.spinics.net/lists/netdev/msg310922.html
Signed-off-by: Martin Fuzzey <[email protected]>
Signed-off-by: Fugang Duan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/freescale/fec.h | 7 +
drivers/net/ethernet/freescale/fec_main.c | 149 +++++++++++++++++-----
2 files changed, 127 insertions(+), 29 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h
index f79e57f735b39..d89568f810bc4 100644
--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -488,6 +488,12 @@ struct fec_enet_priv_rx_q {
struct sk_buff *rx_skbuff[RX_RING_SIZE];
};
+struct fec_stop_mode_gpr {
+ struct regmap *gpr;
+ u8 reg;
+ u8 bit;
+};
+
/* The FEC buffer descriptors track the ring buffers. The rx_bd_base and
* tx_bd_base always point to the base of the buffer descriptors. The
* cur_rx and cur_tx point to the currently available buffer.
@@ -562,6 +568,7 @@ struct fec_enet_private {
int hwts_tx_en;
struct delayed_work time_keep;
struct regulator *reg_phy;
+ struct fec_stop_mode_gpr stop_gpr;
unsigned int tx_align;
unsigned int rx_align;
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 3fc8a66e4f41a..39c112f1543c1 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -62,6 +62,8 @@
#include <linux/if_vlan.h>
#include <linux/pinctrl/consumer.h>
#include <linux/prefetch.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
#include <soc/imx/cpuidle.h>
#include <asm/cacheflush.h>
@@ -84,6 +86,56 @@ static void fec_enet_itr_coal_init(struct net_device *ndev);
#define FEC_ENET_OPD_V 0xFFF0
#define FEC_MDIO_PM_TIMEOUT 100 /* ms */
+struct fec_devinfo {
+ u32 quirks;
+ u8 stop_gpr_reg;
+ u8 stop_gpr_bit;
+};
+
+static const struct fec_devinfo fec_imx25_info = {
+ .quirks = FEC_QUIRK_USE_GASKET | FEC_QUIRK_MIB_CLEAR |
+ FEC_QUIRK_HAS_FRREG,
+};
+
+static const struct fec_devinfo fec_imx27_info = {
+ .quirks = FEC_QUIRK_MIB_CLEAR | FEC_QUIRK_HAS_FRREG,
+};
+
+static const struct fec_devinfo fec_imx28_info = {
+ .quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME |
+ FEC_QUIRK_SINGLE_MDIO | FEC_QUIRK_HAS_RACC |
+ FEC_QUIRK_HAS_FRREG,
+};
+
+static const struct fec_devinfo fec_imx6q_info = {
+ .quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
+ FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
+ FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR006358 |
+ FEC_QUIRK_HAS_RACC,
+ .stop_gpr_reg = 0x34,
+ .stop_gpr_bit = 27,
+};
+
+static const struct fec_devinfo fec_mvf600_info = {
+ .quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_RACC,
+};
+
+static const struct fec_devinfo fec_imx6x_info = {
+ .quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
+ FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
+ FEC_QUIRK_HAS_VLAN | FEC_QUIRK_HAS_AVB |
+ FEC_QUIRK_ERR007885 | FEC_QUIRK_BUG_CAPTURE |
+ FEC_QUIRK_HAS_RACC | FEC_QUIRK_HAS_COALESCE,
+};
+
+static const struct fec_devinfo fec_imx6ul_info = {
+ .quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
+ FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
+ FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR007885 |
+ FEC_QUIRK_BUG_CAPTURE | FEC_QUIRK_HAS_RACC |
+ FEC_QUIRK_HAS_COALESCE,
+};
+
static struct platform_device_id fec_devtype[] = {
{
/* keep it for coldfire */
@@ -91,39 +143,25 @@ static struct platform_device_id fec_devtype[] = {
.driver_data = 0,
}, {
.name = "imx25-fec",
- .driver_data = FEC_QUIRK_USE_GASKET | FEC_QUIRK_MIB_CLEAR |
- FEC_QUIRK_HAS_FRREG,
+ .driver_data = (kernel_ulong_t)&fec_imx25_info,
}, {
.name = "imx27-fec",
- .driver_data = FEC_QUIRK_MIB_CLEAR | FEC_QUIRK_HAS_FRREG,
+ .driver_data = (kernel_ulong_t)&fec_imx27_info,
}, {
.name = "imx28-fec",
- .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME |
- FEC_QUIRK_SINGLE_MDIO | FEC_QUIRK_HAS_RACC |
- FEC_QUIRK_HAS_FRREG,
+ .driver_data = (kernel_ulong_t)&fec_imx28_info,
}, {
.name = "imx6q-fec",
- .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
- FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
- FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR006358 |
- FEC_QUIRK_HAS_RACC,
+ .driver_data = (kernel_ulong_t)&fec_imx6q_info,
}, {
.name = "mvf600-fec",
- .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_RACC,
+ .driver_data = (kernel_ulong_t)&fec_mvf600_info,
}, {
.name = "imx6sx-fec",
- .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
- FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
- FEC_QUIRK_HAS_VLAN | FEC_QUIRK_HAS_AVB |
- FEC_QUIRK_ERR007885 | FEC_QUIRK_BUG_CAPTURE |
- FEC_QUIRK_HAS_RACC | FEC_QUIRK_HAS_COALESCE,
+ .driver_data = (kernel_ulong_t)&fec_imx6x_info,
}, {
.name = "imx6ul-fec",
- .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
- FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
- FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR007885 |
- FEC_QUIRK_BUG_CAPTURE | FEC_QUIRK_HAS_RACC |
- FEC_QUIRK_HAS_COALESCE,
+ .driver_data = (kernel_ulong_t)&fec_imx6ul_info,
}, {
/* sentinel */
}
@@ -1092,11 +1130,28 @@ fec_restart(struct net_device *ndev)
}
+static void fec_enet_stop_mode(struct fec_enet_private *fep, bool enabled)
+{
+ struct fec_platform_data *pdata = fep->pdev->dev.platform_data;
+ struct fec_stop_mode_gpr *stop_gpr = &fep->stop_gpr;
+
+ if (stop_gpr->gpr) {
+ if (enabled)
+ regmap_update_bits(stop_gpr->gpr, stop_gpr->reg,
+ BIT(stop_gpr->bit),
+ BIT(stop_gpr->bit));
+ else
+ regmap_update_bits(stop_gpr->gpr, stop_gpr->reg,
+ BIT(stop_gpr->bit), 0);
+ } else if (pdata && pdata->sleep_mode_enable) {
+ pdata->sleep_mode_enable(enabled);
+ }
+}
+
static void
fec_stop(struct net_device *ndev)
{
struct fec_enet_private *fep = netdev_priv(ndev);
- struct fec_platform_data *pdata = fep->pdev->dev.platform_data;
u32 rmii_mode = readl(fep->hwp + FEC_R_CNTRL) & (1 << 8);
u32 val;
@@ -1125,9 +1180,7 @@ fec_stop(struct net_device *ndev)
val = readl(fep->hwp + FEC_ECNTRL);
val |= (FEC_ECR_MAGICEN | FEC_ECR_SLEEP);
writel(val, fep->hwp + FEC_ECNTRL);
-
- if (pdata && pdata->sleep_mode_enable)
- pdata->sleep_mode_enable(true);
+ fec_enet_stop_mode(fep, true);
}
writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
@@ -3398,6 +3451,37 @@ static int fec_enet_get_irq_cnt(struct platform_device *pdev)
return irq_cnt;
}
+static int fec_enet_init_stop_mode(struct fec_enet_private *fep,
+ struct fec_devinfo *dev_info,
+ struct device_node *np)
+{
+ struct device_node *gpr_np;
+ int ret = 0;
+
+ if (!dev_info)
+ return 0;
+
+ gpr_np = of_parse_phandle(np, "gpr", 0);
+ if (!gpr_np)
+ return 0;
+
+ fep->stop_gpr.gpr = syscon_node_to_regmap(gpr_np);
+ if (IS_ERR(fep->stop_gpr.gpr)) {
+ dev_err(&fep->pdev->dev, "could not find gpr regmap\n");
+ ret = PTR_ERR(fep->stop_gpr.gpr);
+ fep->stop_gpr.gpr = NULL;
+ goto out;
+ }
+
+ fep->stop_gpr.reg = dev_info->stop_gpr_reg;
+ fep->stop_gpr.bit = dev_info->stop_gpr_bit;
+
+out:
+ of_node_put(gpr_np);
+
+ return ret;
+}
+
static int
fec_probe(struct platform_device *pdev)
{
@@ -3412,6 +3496,7 @@ fec_probe(struct platform_device *pdev)
int num_rx_qs;
char irq_name[8];
int irq_cnt;
+ struct fec_devinfo *dev_info;
fec_enet_get_queue_num(pdev, &num_tx_qs, &num_rx_qs);
@@ -3429,7 +3514,9 @@ fec_probe(struct platform_device *pdev)
of_id = of_match_device(fec_dt_ids, &pdev->dev);
if (of_id)
pdev->id_entry = of_id->data;
- fep->quirks = pdev->id_entry->driver_data;
+ dev_info = (struct fec_devinfo *)pdev->id_entry->driver_data;
+ if (dev_info)
+ fep->quirks = dev_info->quirks;
fep->netdev = ndev;
fep->num_rx_queues = num_rx_qs;
@@ -3463,6 +3550,10 @@ fec_probe(struct platform_device *pdev)
if (of_get_property(np, "fsl,magic-packet", NULL))
fep->wol_flag |= FEC_WOL_HAS_MAGIC_PACKET;
+ ret = fec_enet_init_stop_mode(fep, dev_info, np);
+ if (ret)
+ goto failed_stop_mode;
+
phy_node = of_parse_phandle(np, "phy-handle", 0);
if (!phy_node && of_phy_is_fixed_link(np)) {
ret = of_phy_register_fixed_link(np);
@@ -3631,6 +3722,7 @@ failed_clk:
if (of_phy_is_fixed_link(np))
of_phy_deregister_fixed_link(np);
of_node_put(phy_node);
+failed_stop_mode:
failed_phy:
dev_id--;
failed_ioremap:
@@ -3708,7 +3800,6 @@ static int __maybe_unused fec_resume(struct device *dev)
{
struct net_device *ndev = dev_get_drvdata(dev);
struct fec_enet_private *fep = netdev_priv(ndev);
- struct fec_platform_data *pdata = fep->pdev->dev.platform_data;
int ret;
int val;
@@ -3726,8 +3817,8 @@ static int __maybe_unused fec_resume(struct device *dev)
goto failed_clk;
}
if (fep->wol_flag & FEC_WOL_FLAG_ENABLE) {
- if (pdata && pdata->sleep_mode_enable)
- pdata->sleep_mode_enable(false);
+ fec_enet_stop_mode(fep, false);
+
val = readl(fep->hwp + FEC_ECNTRL);
val &= ~(FEC_ECR_MAGICEN | FEC_ECR_SLEEP);
writel(val, fep->hwp + FEC_ECNTRL);
--
2.20.1
From: Ritesh Harjani <[email protected]>
commit f1eec3b0d0a849996ebee733b053efa71803dad5 upstream.
While calculating overhead for internal journal, also check
that j_inum shouldn't be 0. Otherwise we get below error with
xfstests generic/050 with external journal (XXX_LOGDEV config) enabled.
It could be simply reproduced with loop device with an external journal
and marking blockdev as RO before mounting.
[ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode #
------------[ cut here ]------------
generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2)
WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0
CPU: 107 PID: 115347 Comm: mount Tainted: G L --------- -t - 4.18.0-167.el8.ppc64le #1
NIP: c0000000006f6d44 LR: c0000000006f6d40 CTR: 0000000030041dd4
<...>
NIP [c0000000006f6d44] generic_make_request_checks+0x6b4/0x7d0
LR [c0000000006f6d40] generic_make_request_checks+0x6b0/0x7d0
<...>
Call Trace:
generic_make_request_checks+0x6b0/0x7d0 (unreliable)
generic_make_request+0x3c/0x420
submit_bio+0xd8/0x200
submit_bh_wbc+0x1e8/0x250
__sync_dirty_buffer+0xd0/0x210
ext4_commit_super+0x310/0x420 [ext4]
__ext4_error+0xa4/0x1e0 [ext4]
__ext4_iget+0x388/0xe10 [ext4]
ext4_get_journal_inode+0x40/0x150 [ext4]
ext4_calculate_overhead+0x5a8/0x610 [ext4]
ext4_fill_super+0x3188/0x3260 [ext4]
mount_bdev+0x778/0x8f0
ext4_mount+0x28/0x50 [ext4]
mount_fs+0x74/0x230
vfs_kern_mount.part.6+0x6c/0x250
do_mount+0x2fc/0x1280
sys_mount+0x158/0x180
system_call+0x5c/0x70
EXT4-fs (pmem1p2): no journal found
EXT4-fs (pmem1p2): can't get journal size
EXT4-fs (pmem1p2): mounted filesystem without journal. Opts: dax,norecovery
Fixes: 3c816ded78bb ("ext4: use journal inode to determine journal overhead")
Reported-by: Harish Sriram <[email protected]>
Signed-off-by: Ritesh Harjani <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/super.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3562,7 +3562,8 @@ int ext4_calculate_overhead(struct super
*/
if (sbi->s_journal && !sbi->journal_bdev)
overhead += EXT4_NUM_B2C(sbi, sbi->s_journal->j_maxlen);
- else if (ext4_has_feature_journal(sb) && !sbi->s_journal) {
+ else if (ext4_has_feature_journal(sb) && !sbi->s_journal && j_inum) {
+ /* j_inum for internal journal is non-zero */
j_inode = ext4_get_journal_inode(sb, j_inum);
if (j_inode) {
j_blocks = j_inode->i_size >> sb->s_blocksize_bits;
From: Philipp Puschmann <[email protected]>
commit 9df8ba7c63073508e5aa677dade48fcab6a6773e upstream.
If probe fails after enabling the regulators regulator_put is called for
each supply without having them disabled before. This produces some
warnings like
WARNING: CPU: 0 PID: 90 at drivers/regulator/core.c:2044 _regulator_put.part.0+0x154/0x15c
[<c010f7a8>] (unwind_backtrace) from [<c010c544>] (show_stack+0x10/0x14)
[<c010c544>] (show_stack) from [<c012b640>] (__warn+0xd0/0xf4)
[<c012b640>] (__warn) from [<c012b9b4>] (warn_slowpath_fmt+0x64/0xc4)
[<c012b9b4>] (warn_slowpath_fmt) from [<c04c4064>] (_regulator_put.part.0+0x154/0x15c)
[<c04c4064>] (_regulator_put.part.0) from [<c04c4094>] (regulator_put+0x28/0x38)
[<c04c4094>] (regulator_put) from [<c04c40cc>] (regulator_bulk_free+0x28/0x38)
[<c04c40cc>] (regulator_bulk_free) from [<c0579b2c>] (release_nodes+0x1d0/0x22c)
[<c0579b2c>] (release_nodes) from [<c05756dc>] (really_probe+0x108/0x34c)
[<c05756dc>] (really_probe) from [<c0575aec>] (driver_probe_device+0xb8/0x16c)
[<c0575aec>] (driver_probe_device) from [<c0575d40>] (device_driver_attach+0x58/0x60)
[<c0575d40>] (device_driver_attach) from [<c0575da0>] (__driver_attach+0x58/0xcc)
[<c0575da0>] (__driver_attach) from [<c0573978>] (bus_for_each_dev+0x78/0xc0)
[<c0573978>] (bus_for_each_dev) from [<c0574b5c>] (bus_add_driver+0x188/0x1e0)
[<c0574b5c>] (bus_add_driver) from [<c05768b0>] (driver_register+0x74/0x108)
[<c05768b0>] (driver_register) from [<c061ab7c>] (i2c_register_driver+0x3c/0x88)
[<c061ab7c>] (i2c_register_driver) from [<c0102df8>] (do_one_initcall+0x58/0x250)
[<c0102df8>] (do_one_initcall) from [<c01a91bc>] (do_init_module+0x60/0x244)
[<c01a91bc>] (do_init_module) from [<c01ab5a4>] (load_module+0x2180/0x2540)
[<c01ab5a4>] (load_module) from [<c01abbd4>] (sys_finit_module+0xd0/0xe8)
[<c01abbd4>] (sys_finit_module) from [<c01011e0>] (__sys_trace_return+0x0/0x20)
Fixes: 3fd6e7d9a146 (ASoC: tas571x: New driver for TI TAS571x power amplifiers)
Signed-off-by: Philipp Puschmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/codecs/tas571x.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
--- a/sound/soc/codecs/tas571x.c
+++ b/sound/soc/codecs/tas571x.c
@@ -820,8 +820,10 @@ static int tas571x_i2c_probe(struct i2c_
priv->regmap = devm_regmap_init(dev, NULL, client,
priv->chip->regmap_config);
- if (IS_ERR(priv->regmap))
- return PTR_ERR(priv->regmap);
+ if (IS_ERR(priv->regmap)) {
+ ret = PTR_ERR(priv->regmap);
+ goto disable_regs;
+ }
priv->pdn_gpio = devm_gpiod_get_optional(dev, "pdn", GPIOD_OUT_LOW);
if (IS_ERR(priv->pdn_gpio)) {
@@ -845,7 +847,7 @@ static int tas571x_i2c_probe(struct i2c_
ret = regmap_write(priv->regmap, TAS571X_OSC_TRIM_REG, 0);
if (ret)
- return ret;
+ goto disable_regs;
usleep_range(50000, 60000);
@@ -861,12 +863,20 @@ static int tas571x_i2c_probe(struct i2c_
*/
ret = regmap_update_bits(priv->regmap, TAS571X_MVOL_REG, 1, 0);
if (ret)
- return ret;
+ goto disable_regs;
}
- return devm_snd_soc_register_component(&client->dev,
+ ret = devm_snd_soc_register_component(&client->dev,
&priv->component_driver,
&tas571x_dai, 1);
+ if (ret)
+ goto disable_regs;
+
+ return ret;
+
+disable_regs:
+ regulator_bulk_disable(priv->chip->num_supply_names, priv->supplies);
+ return ret;
}
static int tas571x_i2c_remove(struct i2c_client *client)
From: John Garry <[email protected]>
[ Upstream commit 5fe56de799ad03e92d794c7936bf363922b571df ]
If in blk_mq_dispatch_rq_list() we find no budget, then we break of the
dispatch loop, but the request may keep the driver tag, evaulated
in 'nxt' in the previous loop iteration.
Fix by putting the driver tag for that request.
Reviewed-by: Ming Lei <[email protected]>
Signed-off-by: John Garry <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-mq.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/block/blk-mq.c b/block/blk-mq.c
index a8c1a45cedde0..757c0fd9f0cc2 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1232,8 +1232,10 @@ bool blk_mq_dispatch_rq_list(struct request_queue *q, struct list_head *list,
rq = list_first_entry(list, struct request, queuelist);
hctx = rq->mq_hctx;
- if (!got_budget && !blk_mq_get_dispatch_budget(hctx))
+ if (!got_budget && !blk_mq_get_dispatch_budget(hctx)) {
+ blk_mq_put_driver_tag(rq);
break;
+ }
if (!blk_mq_get_driver_tag(rq)) {
/*
--
2.20.1
From: Sascha Hauer <[email protected]>
[ Upstream commit c843b382e61b5f28a3d917712c69a344f632387c ]
The jc42 driver passes I2C client's name as hwmon device name. In case
of device tree probed devices this ends up being part of the compatible
string, "jc-42.4-temp". This name contains hyphens and the hwmon core
doesn't like this:
jc42 2-0018: hwmon: 'jc-42.4-temp' is not a valid name attribute, please fix
This changes the name to "jc42" which doesn't have any illegal
characters.
Signed-off-by: Sascha Hauer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/jc42.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index f2d81b0558e56..e3f1ebee71306 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -506,7 +506,7 @@ static int jc42_probe(struct i2c_client *client, const struct i2c_device_id *id)
}
data->config = config;
- hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
+ hwmon_dev = devm_hwmon_device_register_with_info(dev, "jc42",
data, &jc42_chip_info,
NULL);
return PTR_ERR_OR_ZERO(hwmon_dev);
--
2.20.1
From: Ayush Sawal <[email protected]>
commit ad59ddd02de26271b89564962e74d689f1a30b49 upstream.
This issue occurs only when multiadapters are present. Hang
happens because assign_chcr_device returns u_ctx pointer of
adapter which is not yet initialized as for this adapter cxgb_up
is not been called yet.
The last_dev pointer is used to determine u_ctx pointer and it
is initialized two times in chcr_uld_add in chcr_dev_add respectively.
The fix here is don't initialize the last_dev pointer during
chcr_uld_add. Only assign to value to it when the adapter's
initialization is completed i.e in chcr_dev_add.
Fixes: fef4912b66d62 ("crypto: chelsio - Handle PCI shutdown event").
Signed-off-by: Ayush Sawal <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/chelsio/chcr_core.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/crypto/chelsio/chcr_core.c
+++ b/drivers/crypto/chelsio/chcr_core.c
@@ -125,8 +125,6 @@ static void chcr_dev_init(struct uld_ctx
atomic_set(&dev->inflight, 0);
mutex_lock(&drv_data.drv_mutex);
list_add_tail(&u_ctx->entry, &drv_data.inact_dev);
- if (!drv_data.last_dev)
- drv_data.last_dev = u_ctx;
mutex_unlock(&drv_data.drv_mutex);
}
From: Tamizh chelvam <[email protected]>
[ Upstream commit 93e2d04a1888668183f3fb48666e90b9b31d29e6 ]
Previously mesh channel switch happens if beacon contains
CSA IE without checking the mesh peer info. Due to that
channel switch happens even if the beacon is not from
its own mesh peer. Fixing that by checking if the CSA
originated from the same mesh network before proceeding
for channel switch.
Signed-off-by: Tamizh chelvam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/mesh.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index d09b3c789314d..36978a0e50001 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -1257,15 +1257,15 @@ static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
sdata->u.mesh.mshcfg.rssi_threshold < rx_status->signal)
mesh_neighbour_update(sdata, mgmt->sa, &elems,
rx_status);
+
+ if (ifmsh->csa_role != IEEE80211_MESH_CSA_ROLE_INIT &&
+ !sdata->vif.csa_active)
+ ieee80211_mesh_process_chnswitch(sdata, &elems, true);
}
if (ifmsh->sync_ops)
ifmsh->sync_ops->rx_bcn_presp(sdata,
stype, mgmt, &elems, rx_status);
-
- if (ifmsh->csa_role != IEEE80211_MESH_CSA_ROLE_INIT &&
- !sdata->vif.csa_active)
- ieee80211_mesh_process_chnswitch(sdata, &elems, true);
}
int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata)
@@ -1373,6 +1373,9 @@ static void mesh_rx_csa_frame(struct ieee80211_sub_if_data *sdata,
ieee802_11_parse_elems(pos, len - baselen, true, &elems,
mgmt->bssid, NULL);
+ if (!mesh_matches_local(sdata, &elems))
+ return;
+
ifmsh->chsw_ttl = elems.mesh_chansw_params_ie->mesh_ttl;
if (!--ifmsh->chsw_ttl)
fwd_csa = false;
--
2.20.1
From: Nicolas Saenz Julienne <[email protected]>
commit 90444b958461a5f8fc299ece0fe17eab15cba1e1 upstream.
Since its inception the module was meant to be disabled by default, but
the original commit failed to add the relevant property.
Fixes: 4aba4cf82054 ("ARM: dts: bcm2835: Add the DSI module nodes and clocks")
Signed-off-by: Nicolas Saenz Julienne <[email protected]>
Reviewed-by: Eric Anholt <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/bcm283x.dtsi | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -488,6 +488,7 @@
"dsi0_ddr2",
"dsi0_ddr";
+ status = "disabled";
};
thermal: thermal@7e212000 {
From: Pierre-Louis Bossart <[email protected]>
commit a22ae72b86a4f754e8d25fbf9ea5a8f77365e531 upstream.
v5.4 changes in soc-core tightened the checks on soc_dapm_add_routes,
which results in the ASoC card probe failing.
Introduce a flag to be set in machine drivers to prevent the probe
from stopping in case of incomplete topologies or missing routes. This
flag is for backwards compatibility only and shall not be used for
newer machine drivers.
Example with an HDaudio card with a bad topology:
[ 236.177898] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Failed to
add route iDisp1_out -> direct -> iDisp1 Tx
[ 236.177902] skl_hda_dsp_generic skl_hda_dsp_generic:
snd_soc_bind_card: snd_soc_dapm_add_routes failed: -19
with the disable_route_checks set:
[ 64.031657] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Failed to
add route iDisp1_out -> direct -> iDisp1 Tx
[ 64.031661] skl_hda_dsp_generic skl_hda_dsp_generic:
snd_soc_bind_card: disable_route_checks set, ignoring errors on
add_routes
Fixes: daa480bde6b3a9 ("ASoC: soc-core: tidyup for snd_soc_dapm_add_routes()")
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Acked-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/sound/soc.h | 1 +
sound/soc/soc-core.c | 28 ++++++++++++++++++++++++----
2 files changed, 25 insertions(+), 4 deletions(-)
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -1059,6 +1059,7 @@ struct snd_soc_card {
const struct snd_soc_dapm_route *of_dapm_routes;
int num_of_dapm_routes;
bool fully_routed;
+ bool disable_route_checks;
/* lists of probed devices belonging to this card */
struct list_head component_dev_list;
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -1076,8 +1076,18 @@ static int soc_probe_component(struct sn
ret = snd_soc_dapm_add_routes(dapm,
component->driver->dapm_routes,
component->driver->num_dapm_routes);
- if (ret < 0)
- goto err_probe;
+ if (ret < 0) {
+ if (card->disable_route_checks) {
+ dev_info(card->dev,
+ "%s: disable_route_checks set, ignoring errors on add_routes\n",
+ __func__);
+ } else {
+ dev_err(card->dev,
+ "%s: snd_soc_dapm_add_routes failed: %d\n",
+ __func__, ret);
+ goto err_probe;
+ }
+ }
/* see for_each_card_components */
list_add(&component->card_list, &card->component_dev_list);
@@ -2067,8 +2077,18 @@ static int snd_soc_instantiate_card(stru
ret = snd_soc_dapm_add_routes(&card->dapm, card->dapm_routes,
card->num_dapm_routes);
- if (ret < 0)
- goto probe_end;
+ if (ret < 0) {
+ if (card->disable_route_checks) {
+ dev_info(card->dev,
+ "%s: disable_route_checks set, ignoring errors on add_routes\n",
+ __func__);
+ } else {
+ dev_err(card->dev,
+ "%s: snd_soc_dapm_add_routes failed: %d\n",
+ __func__, ret);
+ goto probe_end;
+ }
+ }
ret = snd_soc_dapm_add_routes(&card->dapm, card->of_dapm_routes,
card->num_of_dapm_routes);
From: Raymond Pang <[email protected]>
commit 3375590623e4a132b19a8740512f4deb95728933 upstream.
Add Zhaoxin Vendor ID to pci_ids.h
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Raymond Pang <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/pci_ids.h | 2 ++
1 file changed, 2 insertions(+)
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2582,6 +2582,8 @@
#define PCI_VENDOR_ID_AMAZON 0x1d0f
+#define PCI_VENDOR_ID_ZHAOXIN 0x1d17
+
#define PCI_VENDOR_ID_HYGON 0x1d94
#define PCI_VENDOR_ID_HXT 0x1dbf
From: Bjorn Helgaas <[email protected]>
commit 7cf2cba43f15c74bac46dc5f0326805d25ef514d upstream.
Most of the ACS quirks have a similar pattern of:
acs_flags &= ~( <controls provided by this device> );
return acs_flags ? 0 : 1;
Pull this out into a helper function to simplify the quirks slightly. The
helper function is also a convenient place for comments about what the list
of ACS controls means. No functional change intended.
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Alex Williamson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/quirks.c | 67 ++++++++++++++++++++++++++++++++++-----------------
1 file changed, 45 insertions(+), 22 deletions(-)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4353,6 +4353,24 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_C
quirk_chelsio_T5_disable_root_port_attributes);
/*
+ * pci_acs_ctrl_enabled - compare desired ACS controls with those provided
+ * by a device
+ * @acs_ctrl_req: Bitmask of desired ACS controls
+ * @acs_ctrl_ena: Bitmask of ACS controls enabled or provided implicitly by
+ * the hardware design
+ *
+ * Return 1 if all ACS controls in the @acs_ctrl_req bitmask are included
+ * in @acs_ctrl_ena, i.e., the device provides all the access controls the
+ * caller desires. Return 0 otherwise.
+ */
+static int pci_acs_ctrl_enabled(u16 acs_ctrl_req, u16 acs_ctrl_ena)
+{
+ if ((acs_ctrl_req & acs_ctrl_ena) == acs_ctrl_req)
+ return 1;
+ return 0;
+}
+
+/*
* AMD has indicated that the devices below do not support peer-to-peer
* in any system where they are found in the southbridge with an AMD
* IOMMU in the system. Multifunction devices that do not support
@@ -4395,7 +4413,7 @@ static int pci_quirk_amd_sb_acs(struct p
/* Filter out flags not applicable to multifunction */
acs_flags &= (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_EC | PCI_ACS_DT);
- return acs_flags & ~(PCI_ACS_RR | PCI_ACS_CR) ? 0 : 1;
+ return pci_acs_ctrl_enabled(acs_flags, PCI_ACS_RR | PCI_ACS_CR);
#else
return -ENODEV;
#endif
@@ -4433,9 +4451,8 @@ static int pci_quirk_cavium_acs(struct p
* hardware implements and enables equivalent ACS functionality for
* these flags.
*/
- acs_flags &= ~(PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
-
- return acs_flags ? 0 : 1;
+ return pci_acs_ctrl_enabled(acs_flags,
+ PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
}
static int pci_quirk_xgene_acs(struct pci_dev *dev, u16 acs_flags)
@@ -4445,9 +4462,8 @@ static int pci_quirk_xgene_acs(struct pc
* transactions with others, allowing masking out these bits as if they
* were unimplemented in the ACS capability.
*/
- acs_flags &= ~(PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
-
- return acs_flags ? 0 : 1;
+ return pci_acs_ctrl_enabled(acs_flags,
+ PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
}
/*
@@ -4499,17 +4515,16 @@ static bool pci_quirk_intel_pch_acs_matc
return false;
}
-#define INTEL_PCH_ACS_FLAGS (PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF)
-
static int pci_quirk_intel_pch_acs(struct pci_dev *dev, u16 acs_flags)
{
if (!pci_quirk_intel_pch_acs_match(dev))
return -ENOTTY;
if (dev->dev_flags & PCI_DEV_FLAGS_ACS_ENABLED_QUIRK)
- acs_flags &= ~(INTEL_PCH_ACS_FLAGS);
+ return pci_acs_ctrl_enabled(acs_flags,
+ PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
- return acs_flags ? 0 : 1;
+ return pci_acs_ctrl_enabled(acs_flags, 0);
}
/*
@@ -4524,9 +4539,8 @@ static int pci_quirk_intel_pch_acs(struc
*/
static int pci_quirk_qcom_rp_acs(struct pci_dev *dev, u16 acs_flags)
{
- acs_flags &= ~(PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
-
- return acs_flags ? 0 : 1;
+ return pci_acs_ctrl_enabled(acs_flags,
+ PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
}
static int pci_quirk_al_acs(struct pci_dev *dev, u16 acs_flags)
@@ -4627,7 +4641,7 @@ static int pci_quirk_intel_spt_pch_acs(s
pci_read_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, &ctrl);
- return acs_flags & ~ctrl ? 0 : 1;
+ return pci_acs_ctrl_enabled(acs_flags, ctrl);
}
static int pci_quirk_mf_endpoint_acs(struct pci_dev *dev, u16 acs_flags)
@@ -4641,10 +4655,9 @@ static int pci_quirk_mf_endpoint_acs(str
* perform peer-to-peer with other functions, allowing us to mask out
* these bits as if they were unimplemented in the ACS capability.
*/
- acs_flags &= ~(PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR |
- PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT);
-
- return acs_flags ? 0 : 1;
+ return pci_acs_ctrl_enabled(acs_flags,
+ PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR |
+ PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT);
}
static int pci_quirk_brcm_acs(struct pci_dev *dev, u16 acs_flags)
@@ -4655,9 +4668,8 @@ static int pci_quirk_brcm_acs(struct pci
* Allow each Root Port to be in a separate IOMMU group by masking
* SV/RR/CR/UF bits.
*/
- acs_flags &= ~(PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
-
- return acs_flags ? 0 : 1;
+ return pci_acs_ctrl_enabled(acs_flags,
+ PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
}
static const struct pci_dev_acs_enabled {
@@ -4763,6 +4775,17 @@ static const struct pci_dev_acs_enabled
{ 0 }
};
+/*
+ * pci_dev_specific_acs_enabled - check whether device provides ACS controls
+ * @dev: PCI device
+ * @acs_flags: Bitmask of desired ACS controls
+ *
+ * Returns:
+ * -ENOTTY: No quirk applies to this device; we can't tell whether the
+ * device provides the desired controls
+ * 0: Device does not provide all the desired controls
+ * >0: Device provides all the controls in @acs_flags
+ */
int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags)
{
const struct pci_dev_acs_enabled *i;
From: Eric Biggers <[email protected]>
commit 10a98cb16d80be3595fdb165fad898bb28b8b6d2 upstream.
Leaving PF_MEMALLOC set when exiting a kthread causes it to remain set
during do_exit(). That can confuse things. In particular, if BSD
process accounting is enabled, then do_exit() writes data to an
accounting file. If that file has FS_SYNC_FL set, then this write
occurs synchronously and can misbehave if PF_MEMALLOC is set.
For example, if the accounting file is located on an XFS filesystem,
then a WARN_ON_ONCE() in iomap_do_writepage() is triggered and the data
doesn't get written when it should. Or if the accounting file is
located on an ext4 filesystem without a journal, then a WARN_ON_ONCE()
in ext4_write_inode() is triggered and the inode doesn't get written.
Fix this in xfsaild() by using the helper functions to save and restore
PF_MEMALLOC.
This can be reproduced as follows in the kvm-xfstests test appliance
modified to add the 'acct' Debian package, and with kvm-xfstests's
recommended kconfig modified to add CONFIG_BSD_PROCESS_ACCT=y:
mkfs.xfs -f /dev/vdb
mount /vdb
touch /vdb/file
chattr +S /vdb/file
accton /vdb/file
mkfs.xfs -f /dev/vdc
mount /vdc
umount /vdc
It causes:
WARNING: CPU: 1 PID: 336 at fs/iomap/buffered-io.c:1534
CPU: 1 PID: 336 Comm: xfsaild/vdc Not tainted 5.6.0-rc5 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014
RIP: 0010:iomap_do_writepage+0x16b/0x1f0 fs/iomap/buffered-io.c:1534
[...]
Call Trace:
write_cache_pages+0x189/0x4d0 mm/page-writeback.c:2238
iomap_writepages+0x1c/0x33 fs/iomap/buffered-io.c:1642
xfs_vm_writepages+0x65/0x90 fs/xfs/xfs_aops.c:578
do_writepages+0x41/0xe0 mm/page-writeback.c:2344
__filemap_fdatawrite_range+0xd2/0x120 mm/filemap.c:421
file_write_and_wait_range+0x71/0xc0 mm/filemap.c:760
xfs_file_fsync+0x7a/0x2b0 fs/xfs/xfs_file.c:114
generic_write_sync include/linux/fs.h:2867 [inline]
xfs_file_buffered_aio_write+0x379/0x3b0 fs/xfs/xfs_file.c:691
call_write_iter include/linux/fs.h:1901 [inline]
new_sync_write+0x130/0x1d0 fs/read_write.c:483
__kernel_write+0x54/0xe0 fs/read_write.c:515
do_acct_process+0x122/0x170 kernel/acct.c:522
slow_acct_process kernel/acct.c:581 [inline]
acct_process+0x1d4/0x27c kernel/acct.c:607
do_exit+0x83d/0xbc0 kernel/exit.c:791
kthread+0xf1/0x140 kernel/kthread.c:257
ret_from_fork+0x27/0x50 arch/x86/entry/entry_64.S:352
This bug was originally reported by syzbot at
https://lore.kernel.org/r/[email protected].
Reported-by: [email protected]
Signed-off-by: Eric Biggers <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/xfs/xfs_trans_ail.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/xfs/xfs_trans_ail.c
+++ b/fs/xfs/xfs_trans_ail.c
@@ -529,8 +529,9 @@ xfsaild(
{
struct xfs_ail *ailp = data;
long tout = 0; /* milliseconds */
+ unsigned int noreclaim_flag;
- current->flags |= PF_MEMALLOC;
+ noreclaim_flag = memalloc_noreclaim_save();
set_freezable();
while (1) {
@@ -601,6 +602,7 @@ xfsaild(
tout = xfsaild_push(ailp);
}
+ memalloc_noreclaim_restore(noreclaim_flag);
return 0;
}
From: Waiman Long <[email protected]>
commit d6c8e949a35d6906d6c03a50e9a9cdf4e494528a upstream.
Systemtap 4.2 is unable to correctly interpret the "u32 (*missed_ppm)[2]"
argument of the iocost_ioc_vrate_adj trace entry defined in
include/trace/events/iocost.h leading to the following error:
/tmp/stapAcz0G0/stap_c89c58b83cea1724e26395efa9ed4939_6321_aux_6.c:78:8:
error: expected ‘;’, ‘,’ or ‘)’ before ‘*’ token
, u32[]* __tracepoint_arg_missed_ppm
That argument type is indeed rather complex and hard to read. Looking
at block/blk-iocost.c. It is just a 2-entry u32 array. By simplifying
the argument to a simple "u32 *missed_ppm" and adjusting the trace
entry accordingly, the compilation error was gone.
Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Acked-by: Steven Rostedt (VMware) <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Signed-off-by: Waiman Long <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/blk-iocost.c | 4 ++--
include/trace/events/iocost.h | 6 +++---
2 files changed, 5 insertions(+), 5 deletions(-)
--- a/block/blk-iocost.c
+++ b/block/blk-iocost.c
@@ -1594,7 +1594,7 @@ skip_surplus_transfers:
vrate_min, vrate_max);
}
- trace_iocost_ioc_vrate_adj(ioc, vrate, &missed_ppm, rq_wait_pct,
+ trace_iocost_ioc_vrate_adj(ioc, vrate, missed_ppm, rq_wait_pct,
nr_lagging, nr_shortages,
nr_surpluses);
@@ -1603,7 +1603,7 @@ skip_surplus_transfers:
ioc->period_us * vrate * INUSE_MARGIN_PCT, 100);
} else if (ioc->busy_level != prev_busy_level || nr_lagging) {
trace_iocost_ioc_vrate_adj(ioc, atomic64_read(&ioc->vtime_rate),
- &missed_ppm, rq_wait_pct, nr_lagging,
+ missed_ppm, rq_wait_pct, nr_lagging,
nr_shortages, nr_surpluses);
}
--- a/include/trace/events/iocost.h
+++ b/include/trace/events/iocost.h
@@ -130,7 +130,7 @@ DEFINE_EVENT(iocg_inuse_update, iocost_i
TRACE_EVENT(iocost_ioc_vrate_adj,
- TP_PROTO(struct ioc *ioc, u64 new_vrate, u32 (*missed_ppm)[2],
+ TP_PROTO(struct ioc *ioc, u64 new_vrate, u32 *missed_ppm,
u32 rq_wait_pct, int nr_lagging, int nr_shortages,
int nr_surpluses),
@@ -155,8 +155,8 @@ TRACE_EVENT(iocost_ioc_vrate_adj,
__entry->old_vrate = atomic64_read(&ioc->vtime_rate);;
__entry->new_vrate = new_vrate;
__entry->busy_level = ioc->busy_level;
- __entry->read_missed_ppm = (*missed_ppm)[READ];
- __entry->write_missed_ppm = (*missed_ppm)[WRITE];
+ __entry->read_missed_ppm = missed_ppm[READ];
+ __entry->write_missed_ppm = missed_ppm[WRITE];
__entry->rq_wait_pct = rq_wait_pct;
__entry->nr_lagging = nr_lagging;
__entry->nr_shortages = nr_shortages;
From: Wang YanQing <[email protected]>
commit 5ca1ca01fae1e90f8d010eb1d83374f28dc11ee6 upstream.
When verifier_zext is true, we don't need to emit code
for zero-extension.
Fixes: 836256bf5f37 ("x32: bpf: eliminate zero extension code-gen")
Signed-off-by: Wang YanQing <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/20200423050637.GA4029@udknight
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/net/bpf_jit_comp32.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/net/bpf_jit_comp32.c
+++ b/arch/x86/net/bpf_jit_comp32.c
@@ -1847,7 +1847,7 @@ static int do_jit(struct bpf_prog *bpf_p
case BPF_B:
case BPF_H:
case BPF_W:
- if (!bpf_prog->aux->verifier_zext)
+ if (bpf_prog->aux->verifier_zext)
break;
if (dstk) {
EMIT3(0xC7, add_1reg(0x40, IA32_EBP),
From: Hui Wang <[email protected]>
[ Upstream commit 9a6418487b566503c772cb6e7d3d44e652b019b0 ]
Before the pci_driver->probe() is called, the pci subsystem calls
runtime_forbid() and runtime_get_sync() on this pci dev, so only call
runtime_put_autosuspend() is not enough to enable the runtime_pm on
this device.
For controllers with vgaswitcheroo feature, the pci/quirks.c will call
runtime_allow() for this dev, then the controllers could enter
rt_idle/suspend/resume, but for non-vgaswitcheroo controllers like
Intel hda controllers, the runtime_pm is not enabled because the
runtime_allow() is not called.
Since it is no harm calling runtime_allow() twice, here let hda
driver call runtime_allow() for all controllers. Then the runtime_pm
is enabled on all controllers after the put_autosuspend() is called.
Signed-off-by: Hui Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/hda_intel.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index a85b0cf7371a3..1673479b4eef3 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2305,6 +2305,7 @@ static int azx_probe_continue(struct azx *chip)
if (azx_has_pm_runtime(chip)) {
pm_runtime_use_autosuspend(&pci->dev);
+ pm_runtime_allow(&pci->dev);
pm_runtime_put_autosuspend(&pci->dev);
}
--
2.20.1
From: Bodo Stroesser <[email protected]>
[ Upstream commit 066f79a5fd6d1b9a5cc57b5cd445b3e4bb68a5b2 ]
In case command ring buffer becomes inconsistent, tcmu sets device flag
TCMU_DEV_BIT_BROKEN. If the bit is set, tcmu rejects new commands from LIO
core with TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE, and no longer processes
completions from the ring. The reset_ring attribute can be used to
completely clean up the command ring, so after reset_ring the ring no
longer is inconsistent.
Therefore reset_ring also should reset bit TCMU_DEV_BIT_BROKEN to allow
normal processing.
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Mike Christie <[email protected]>
Signed-off-by: Bodo Stroesser <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/target/target_core_user.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c
index 35be1be87d2a1..9425354aef99c 100644
--- a/drivers/target/target_core_user.c
+++ b/drivers/target/target_core_user.c
@@ -2073,6 +2073,7 @@ static void tcmu_reset_ring(struct tcmu_dev *udev, u8 err_level)
mb->cmd_tail = 0;
mb->cmd_head = 0;
tcmu_flush_dcache_range(mb, sizeof(*mb));
+ clear_bit(TCMU_DEV_BIT_BROKEN, &udev->flags);
del_timer(&udev->cmd_timer);
--
2.20.1
From: Bodo Stroesser <[email protected]>
[ Upstream commit 8fed04eb79a74cbf471dfaa755900a51b37273ab ]
Creation of the response to READ FULL STATUS fails for FC based
reservations. Reason is the too high loop limit (< 24) in
fc_get_pr_transport_id(). The string representation of FC WWPN is 23 chars
long only ("11:22:33:44:55:66:77:88"). So when i is 23, the loop body is
executed a last time for the ending '\0' of the string and thus hex2bin()
reports an error.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bodo Stroesser <[email protected]>
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/target/target_core_fabric_lib.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/target/target_core_fabric_lib.c b/drivers/target/target_core_fabric_lib.c
index 6b4b354c88aa0..b5c970faf5854 100644
--- a/drivers/target/target_core_fabric_lib.c
+++ b/drivers/target/target_core_fabric_lib.c
@@ -63,7 +63,7 @@ static int fc_get_pr_transport_id(
* encoded TransportID.
*/
ptr = &se_nacl->initiatorname[0];
- for (i = 0; i < 24; ) {
+ for (i = 0; i < 23; ) {
if (!strncmp(&ptr[i], ":", 1)) {
i++;
continue;
--
2.20.1
From: Roy Spliet <[email protected]>
[ Upstream commit 3ba21113bd33d49f3c300a23fc08cf114c434995 ]
This fixes runtime PM not working after a suspend-to-RAM cycle at least for
the codec-less HDA device found on NVIDIA GPUs.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Signed-off-by: Roy Spliet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/hda_intel.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index fbffec2ab2372..a85b0cf7371a3 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2303,8 +2303,10 @@ static int azx_probe_continue(struct azx *chip)
set_default_power_save(chip);
- if (azx_has_pm_runtime(chip))
+ if (azx_has_pm_runtime(chip)) {
+ pm_runtime_use_autosuspend(&pci->dev);
pm_runtime_put_autosuspend(&pci->dev);
+ }
out_free:
if (err < 0) {
--
2.20.1
From: Yuval Basson <[email protected]>
commit 8063f761cd7c17fc1d0018728936e0c33a25388a upstream.
The qed_chain data structure was modified in
commit 1a4a69751f4d ("qed: Chain support for external PBL") to support
receiving an external pbl (due to iWARP FW requirements).
The pages pointed to by the pbl are allocated in qed_chain_alloc
and their virtual address are stored in an virtual addresses array to
enable accessing and freeing the data. The physical addresses however
weren't stored and were accessed directly from the external-pbl
during free.
Destroy-qp flow, leads to freeing the external pbl before the chain is
freed, when the chain is freed it tries accessing the already freed
external pbl, leading to a use-after-free. Therefore we need to store
the physical addresses in additional to the virtual addresses in a
new data structure.
Fixes: 1a4a69751f4d ("qed: Chain support for external PBL")
Signed-off-by: Michal Kalderon <[email protected]>
Signed-off-by: Yuval Bason <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/qlogic/qed/qed_dev.c | 38 ++++++++++++------------------
include/linux/qed/qed_chain.h | 24 +++++++++++-------
2 files changed, 31 insertions(+), 31 deletions(-)
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -4648,26 +4648,20 @@ static void qed_chain_free_single(struct
static void qed_chain_free_pbl(struct qed_dev *cdev, struct qed_chain *p_chain)
{
- void **pp_virt_addr_tbl = p_chain->pbl.pp_virt_addr_tbl;
+ struct addr_tbl_entry *pp_addr_tbl = p_chain->pbl.pp_addr_tbl;
u32 page_cnt = p_chain->page_cnt, i, pbl_size;
- u8 *p_pbl_virt = p_chain->pbl_sp.p_virt_table;
- if (!pp_virt_addr_tbl)
+ if (!pp_addr_tbl)
return;
- if (!p_pbl_virt)
- goto out;
-
for (i = 0; i < page_cnt; i++) {
- if (!pp_virt_addr_tbl[i])
+ if (!pp_addr_tbl[i].virt_addr || !pp_addr_tbl[i].dma_map)
break;
dma_free_coherent(&cdev->pdev->dev,
QED_CHAIN_PAGE_SIZE,
- pp_virt_addr_tbl[i],
- *(dma_addr_t *)p_pbl_virt);
-
- p_pbl_virt += QED_CHAIN_PBL_ENTRY_SIZE;
+ pp_addr_tbl[i].virt_addr,
+ pp_addr_tbl[i].dma_map);
}
pbl_size = page_cnt * QED_CHAIN_PBL_ENTRY_SIZE;
@@ -4677,9 +4671,9 @@ static void qed_chain_free_pbl(struct qe
pbl_size,
p_chain->pbl_sp.p_virt_table,
p_chain->pbl_sp.p_phys_table);
-out:
- vfree(p_chain->pbl.pp_virt_addr_tbl);
- p_chain->pbl.pp_virt_addr_tbl = NULL;
+
+ vfree(p_chain->pbl.pp_addr_tbl);
+ p_chain->pbl.pp_addr_tbl = NULL;
}
void qed_chain_free(struct qed_dev *cdev, struct qed_chain *p_chain)
@@ -4780,19 +4774,19 @@ qed_chain_alloc_pbl(struct qed_dev *cdev
{
u32 page_cnt = p_chain->page_cnt, size, i;
dma_addr_t p_phys = 0, p_pbl_phys = 0;
- void **pp_virt_addr_tbl = NULL;
+ struct addr_tbl_entry *pp_addr_tbl;
u8 *p_pbl_virt = NULL;
void *p_virt = NULL;
- size = page_cnt * sizeof(*pp_virt_addr_tbl);
- pp_virt_addr_tbl = vzalloc(size);
- if (!pp_virt_addr_tbl)
+ size = page_cnt * sizeof(*pp_addr_tbl);
+ pp_addr_tbl = vzalloc(size);
+ if (!pp_addr_tbl)
return -ENOMEM;
/* The allocation of the PBL table is done with its full size, since it
* is expected to be successive.
* qed_chain_init_pbl_mem() is called even in a case of an allocation
- * failure, since pp_virt_addr_tbl was previously allocated, and it
+ * failure, since tbl was previously allocated, and it
* should be saved to allow its freeing during the error flow.
*/
size = page_cnt * QED_CHAIN_PBL_ENTRY_SIZE;
@@ -4806,8 +4800,7 @@ qed_chain_alloc_pbl(struct qed_dev *cdev
p_chain->b_external_pbl = true;
}
- qed_chain_init_pbl_mem(p_chain, p_pbl_virt, p_pbl_phys,
- pp_virt_addr_tbl);
+ qed_chain_init_pbl_mem(p_chain, p_pbl_virt, p_pbl_phys, pp_addr_tbl);
if (!p_pbl_virt)
return -ENOMEM;
@@ -4826,7 +4819,8 @@ qed_chain_alloc_pbl(struct qed_dev *cdev
/* Fill the PBL table with the physical address of the page */
*(dma_addr_t *)p_pbl_virt = p_phys;
/* Keep the virtual address of the page */
- p_chain->pbl.pp_virt_addr_tbl[i] = p_virt;
+ p_chain->pbl.pp_addr_tbl[i].virt_addr = p_virt;
+ p_chain->pbl.pp_addr_tbl[i].dma_map = p_phys;
p_pbl_virt += QED_CHAIN_PBL_ENTRY_SIZE;
}
--- a/include/linux/qed/qed_chain.h
+++ b/include/linux/qed/qed_chain.h
@@ -97,6 +97,11 @@ struct qed_chain_u32 {
u32 cons_idx;
};
+struct addr_tbl_entry {
+ void *virt_addr;
+ dma_addr_t dma_map;
+};
+
struct qed_chain {
/* fastpath portion of the chain - required for commands such
* as produce / consume.
@@ -107,10 +112,11 @@ struct qed_chain {
/* Fastpath portions of the PBL [if exists] */
struct {
- /* Table for keeping the virtual addresses of the chain pages,
- * respectively to the physical addresses in the pbl table.
+ /* Table for keeping the virtual and physical addresses of the
+ * chain pages, respectively to the physical addresses
+ * in the pbl table.
*/
- void **pp_virt_addr_tbl;
+ struct addr_tbl_entry *pp_addr_tbl;
union {
struct qed_chain_pbl_u16 u16;
@@ -287,7 +293,7 @@ qed_chain_advance_page(struct qed_chain
*(u32 *)page_to_inc = 0;
page_index = *(u32 *)page_to_inc;
}
- *p_next_elem = p_chain->pbl.pp_virt_addr_tbl[page_index];
+ *p_next_elem = p_chain->pbl.pp_addr_tbl[page_index].virt_addr;
}
}
@@ -537,7 +543,7 @@ static inline void qed_chain_init_params
p_chain->pbl_sp.p_phys_table = 0;
p_chain->pbl_sp.p_virt_table = NULL;
- p_chain->pbl.pp_virt_addr_tbl = NULL;
+ p_chain->pbl.pp_addr_tbl = NULL;
}
/**
@@ -575,11 +581,11 @@ static inline void qed_chain_init_mem(st
static inline void qed_chain_init_pbl_mem(struct qed_chain *p_chain,
void *p_virt_pbl,
dma_addr_t p_phys_pbl,
- void **pp_virt_addr_tbl)
+ struct addr_tbl_entry *pp_addr_tbl)
{
p_chain->pbl_sp.p_phys_table = p_phys_pbl;
p_chain->pbl_sp.p_virt_table = p_virt_pbl;
- p_chain->pbl.pp_virt_addr_tbl = pp_virt_addr_tbl;
+ p_chain->pbl.pp_addr_tbl = pp_addr_tbl;
}
/**
@@ -644,7 +650,7 @@ static inline void *qed_chain_get_last_e
break;
case QED_CHAIN_MODE_PBL:
last_page_idx = p_chain->page_cnt - 1;
- p_virt_addr = p_chain->pbl.pp_virt_addr_tbl[last_page_idx];
+ p_virt_addr = p_chain->pbl.pp_addr_tbl[last_page_idx].virt_addr;
break;
}
/* p_virt_addr points at this stage to the last page of the chain */
@@ -716,7 +722,7 @@ static inline void qed_chain_pbl_zero_me
page_cnt = qed_chain_get_page_cnt(p_chain);
for (i = 0; i < page_cnt; i++)
- memset(p_chain->pbl.pp_virt_addr_tbl[i], 0,
+ memset(p_chain->pbl.pp_addr_tbl[i].virt_addr, 0,
QED_CHAIN_PAGE_SIZE);
}
From: Olivier Moysan <[email protected]>
commit a168dae5ea14283e8992d5282237bb0d6a3e1c06 upstream.
Release resources when exiting on error.
Fixes: 1a5c0b28fc56 ("ASoC: stm32: spdifrx: manage identification registers")
Signed-off-by: Olivier Moysan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/stm/stm32_spdifrx.c | 2 ++
1 file changed, 2 insertions(+)
--- a/sound/soc/stm/stm32_spdifrx.c
+++ b/sound/soc/stm/stm32_spdifrx.c
@@ -995,6 +995,8 @@ static int stm32_spdifrx_probe(struct pl
if (idr == SPDIFRX_IPIDR_NUMBER) {
ret = regmap_read(spdifrx->regmap, STM32_SPDIFRX_VERR, &ver);
+ if (ret)
+ goto error;
dev_dbg(&pdev->dev, "SPDIFRX version: %lu.%lu registered\n",
FIELD_GET(SPDIFRX_VERR_MAJ_MASK, ver),
From: Eugene Syromiatnikov <[email protected]>
commit 673040c3a82a7564423e09c791e242a846591e30 upstream.
BIT() macro definition is internal to the Linux kernel and is not
to be used in UAPI headers; replace its usage with the _BITUL() macro
that is already used elsewhere in the header.
Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading")
Signed-off-by: Eugene Syromiatnikov <[email protected]>
Acked-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/uapi/linux/pkt_sched.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/include/uapi/linux/pkt_sched.h
+++ b/include/uapi/linux/pkt_sched.h
@@ -1160,8 +1160,8 @@ enum {
* [TCA_TAPRIO_ATTR_SCHED_ENTRY_INTERVAL]
*/
-#define TCA_TAPRIO_ATTR_FLAG_TXTIME_ASSIST BIT(0)
-#define TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD BIT(1)
+#define TCA_TAPRIO_ATTR_FLAG_TXTIME_ASSIST _BITUL(0)
+#define TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD _BITUL(1)
enum {
TCA_TAPRIO_ATTR_UNSPEC,
From: Theodore Ts'o <[email protected]>
[ Upstream commit 907ea529fc4c3296701d2bfc8b831dd2a8121a34 ]
If the in-core buddy bitmap gets corrupted (or out of sync with the
block bitmap), issue a WARN_ON and try to recover. In most cases this
involves skipping trying to allocate out of a particular block group.
We can end up declaring the file system corrupted, which is fair,
since the file system probably should be checked before we proceed any
further.
Link: https://lore.kernel.org/r/[email protected]
Google-Bug-Id: 34811296
Google-Bug-Id: 34639169
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ext4/mballoc.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index c76ffc259d197..e1782b2e2e2dd 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -1936,7 +1936,8 @@ void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
int free;
free = e4b->bd_info->bb_free;
- BUG_ON(free <= 0);
+ if (WARN_ON(free <= 0))
+ return;
i = e4b->bd_info->bb_first_free;
@@ -1959,7 +1960,8 @@ void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
}
mb_find_extent(e4b, i, ac->ac_g_ex.fe_len, &ex);
- BUG_ON(ex.fe_len <= 0);
+ if (WARN_ON(ex.fe_len <= 0))
+ break;
if (free < ex.fe_len) {
ext4_grp_locked_error(sb, e4b->bd_group, 0, 0,
"%d free clusters as per "
--
2.20.1
From: yangerkun <[email protected]>
[ Upstream commit c2a559bc0e7ed5a715ad6b947025b33cb7c05ea7 ]
Run generic/388 with journal data mode sometimes may trigger the warning
in ext4_invalidatepage. Actually, we should use the matching invalidatepage
in ext4_writepage.
Signed-off-by: yangerkun <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Reviewed-by: Ritesh Harjani <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ext4/inode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index b9473fcc110fd..7e0c77de551bb 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2131,7 +2131,7 @@ static int ext4_writepage(struct page *page,
bool keep_towrite = false;
if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb)))) {
- ext4_invalidatepage(page, 0, PAGE_SIZE);
+ inode->i_mapping->a_ops->invalidatepage(page, 0, PAGE_SIZE);
unlock_page(page);
return -EIO;
}
--
2.20.1
From: Yuval Basson <[email protected]>
commit 3b85720d3fd72e6ef4de252cd2f67548eb645eb4 upstream.
Calling queue_delayed_work concurrently with
destroy_workqueue might race to an unexpected outcome -
scheduled task after wq is destroyed or other resources
(like ptt_pool) are freed (yields NULL pointer dereference).
cancel_delayed_work prevents the race by cancelling
the timer triggered for scheduling a new task.
Fixes: 59ccf86fe ("qed: Add driver infrastucture for handling mfw requests")
Signed-off-by: Denis Bolotin <[email protected]>
Signed-off-by: Michal Kalderon <[email protected]>
Signed-off-by: Yuval Basson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/qlogic/qed/qed_main.c | 13 ++-----------
1 file changed, 2 insertions(+), 11 deletions(-)
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -1087,9 +1087,6 @@ static void qed_update_pf_params(struct
#define QED_PERIODIC_DB_REC_INTERVAL_MS 100
#define QED_PERIODIC_DB_REC_INTERVAL \
msecs_to_jiffies(QED_PERIODIC_DB_REC_INTERVAL_MS)
-#define QED_PERIODIC_DB_REC_WAIT_COUNT 10
-#define QED_PERIODIC_DB_REC_WAIT_INTERVAL \
- (QED_PERIODIC_DB_REC_INTERVAL_MS / QED_PERIODIC_DB_REC_WAIT_COUNT)
static int qed_slowpath_delayed_work(struct qed_hwfn *hwfn,
enum qed_slowpath_wq_flag wq_flag,
@@ -1123,7 +1120,7 @@ void qed_periodic_db_rec_start(struct qe
static void qed_slowpath_wq_stop(struct qed_dev *cdev)
{
- int i, sleep_count = QED_PERIODIC_DB_REC_WAIT_COUNT;
+ int i;
if (IS_VF(cdev))
return;
@@ -1135,13 +1132,7 @@ static void qed_slowpath_wq_stop(struct
/* Stop queuing new delayed works */
cdev->hwfns[i].slowpath_wq_active = false;
- /* Wait until the last periodic doorbell recovery is executed */
- while (test_bit(QED_SLOWPATH_PERIODIC_DB_REC,
- &cdev->hwfns[i].slowpath_task_flags) &&
- sleep_count--)
- msleep(QED_PERIODIC_DB_REC_WAIT_INTERVAL);
-
- flush_workqueue(cdev->hwfns[i].slowpath_wq);
+ cancel_delayed_work(&cdev->hwfns[i].slowpath_task);
destroy_workqueue(cdev->hwfns[i].slowpath_wq);
}
}
From: Josh Poimboeuf <[email protected]>
[ Upstream commit 8782e7cab51b6bf01a5a86471dd82228af1ac185 ]
Historically, the relocation symbols for ORC entries have only been
section symbols:
.text+0: sp:sp+8 bp:(und) type:call end:0
However, the Clang assembler is aggressive about stripping section
symbols. In that case we will need to use function symbols:
freezing_slow_path+0: sp:sp+8 bp:(und) type:call end:0
In preparation for the generation of such entries in "objtool orc
generate", add support for reading them in "objtool orc dump".
Signed-off-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/b811b5eb1a42602c3b523576dc5efab9ad1c174d.1585761021.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <[email protected]>
---
tools/objtool/orc_dump.c | 44 ++++++++++++++++++++++++----------------
1 file changed, 27 insertions(+), 17 deletions(-)
diff --git a/tools/objtool/orc_dump.c b/tools/objtool/orc_dump.c
index 13ccf775a83a4..ba4cbb1cdd632 100644
--- a/tools/objtool/orc_dump.c
+++ b/tools/objtool/orc_dump.c
@@ -66,7 +66,7 @@ int orc_dump(const char *_objname)
char *name;
size_t nr_sections;
Elf64_Addr orc_ip_addr = 0;
- size_t shstrtab_idx;
+ size_t shstrtab_idx, strtab_idx = 0;
Elf *elf;
Elf_Scn *scn;
GElf_Shdr sh;
@@ -127,6 +127,8 @@ int orc_dump(const char *_objname)
if (!strcmp(name, ".symtab")) {
symtab = data;
+ } else if (!strcmp(name, ".strtab")) {
+ strtab_idx = i;
} else if (!strcmp(name, ".orc_unwind")) {
orc = data->d_buf;
orc_size = sh.sh_size;
@@ -138,7 +140,7 @@ int orc_dump(const char *_objname)
}
}
- if (!symtab || !orc || !orc_ip)
+ if (!symtab || !strtab_idx || !orc || !orc_ip)
return 0;
if (orc_size % sizeof(*orc) != 0) {
@@ -159,21 +161,29 @@ int orc_dump(const char *_objname)
return -1;
}
- scn = elf_getscn(elf, sym.st_shndx);
- if (!scn) {
- WARN_ELF("elf_getscn");
- return -1;
- }
-
- if (!gelf_getshdr(scn, &sh)) {
- WARN_ELF("gelf_getshdr");
- return -1;
- }
-
- name = elf_strptr(elf, shstrtab_idx, sh.sh_name);
- if (!name || !*name) {
- WARN_ELF("elf_strptr");
- return -1;
+ if (GELF_ST_TYPE(sym.st_info) == STT_SECTION) {
+ scn = elf_getscn(elf, sym.st_shndx);
+ if (!scn) {
+ WARN_ELF("elf_getscn");
+ return -1;
+ }
+
+ if (!gelf_getshdr(scn, &sh)) {
+ WARN_ELF("gelf_getshdr");
+ return -1;
+ }
+
+ name = elf_strptr(elf, shstrtab_idx, sh.sh_name);
+ if (!name) {
+ WARN_ELF("elf_strptr");
+ return -1;
+ }
+ } else {
+ name = elf_strptr(elf, strtab_idx, sym.st_name);
+ if (!name) {
+ WARN_ELF("elf_strptr");
+ return -1;
+ }
}
printf("%s+%llx:", name, (unsigned long long)rela.r_addend);
--
2.20.1
From: Juergen Gross <[email protected]>
[ Upstream commit 6b51fd3f65a22e3d1471b18a1d56247e246edd46 ]
xenbus_map_ring_valloc() maps a ring page and returns the status of the
used grant (0 meaning success).
There are Xen hypervisors which might return the value 1 for the status
of a failed grant mapping due to a bug. Some callers of
xenbus_map_ring_valloc() test for errors by testing the returned status
to be less than zero, resulting in no error detected and crashing later
due to a not available ring page.
Set the return value of xenbus_map_ring_valloc() to GNTST_general_error
in case the grant status reported by Xen is greater than zero.
This is part of XSA-316.
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Wei Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/xen/xenbus/xenbus_client.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/xen/xenbus/xenbus_client.c b/drivers/xen/xenbus/xenbus_client.c
index e17ca81561713..a38292ef79f6d 100644
--- a/drivers/xen/xenbus/xenbus_client.c
+++ b/drivers/xen/xenbus/xenbus_client.c
@@ -448,7 +448,14 @@ EXPORT_SYMBOL_GPL(xenbus_free_evtchn);
int xenbus_map_ring_valloc(struct xenbus_device *dev, grant_ref_t *gnt_refs,
unsigned int nr_grefs, void **vaddr)
{
- return ring_ops->map(dev, gnt_refs, nr_grefs, vaddr);
+ int err;
+
+ err = ring_ops->map(dev, gnt_refs, nr_grefs, vaddr);
+ /* Some hypervisors are buggy and can return 1. */
+ if (err > 0)
+ err = GNTST_general_error;
+
+ return err;
}
EXPORT_SYMBOL_GPL(xenbus_map_ring_valloc);
--
2.20.1
From: Niklas Schnelle <[email protected]>
commit a019b36123aec9700b21ae0724710f62928a8bc1 upstream.
On s390 FORCE_MAX_ZONEORDER is 9 instead of 11, thus a larger kzalloc()
allocation as done for the firmware tracer will always fail.
Looking at mlx5_fw_tracer_save_trace(), it is actually the driver itself
that copies the debug data into the trace array and there is no need for
the allocation to be contiguous in physical memory. We can therefor use
kvzalloc() instead of kzalloc() and get rid of the large contiguous
allcoation.
Fixes: f53aaa31cce7 ("net/mlx5: FW tracer, implement tracer logic")
Signed-off-by: Niklas Schnelle <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c
@@ -935,7 +935,7 @@ struct mlx5_fw_tracer *mlx5_fw_tracer_cr
return NULL;
}
- tracer = kzalloc(sizeof(*tracer), GFP_KERNEL);
+ tracer = kvzalloc(sizeof(*tracer), GFP_KERNEL);
if (!tracer)
return ERR_PTR(-ENOMEM);
@@ -982,7 +982,7 @@ destroy_workqueue:
tracer->dev = NULL;
destroy_workqueue(tracer->work_queue);
free_tracer:
- kfree(tracer);
+ kvfree(tracer);
return ERR_PTR(err);
}
@@ -1061,7 +1061,7 @@ void mlx5_fw_tracer_destroy(struct mlx5_
mlx5_fw_tracer_destroy_log_buf(tracer);
flush_workqueue(tracer->work_queue);
destroy_workqueue(tracer->work_queue);
- kfree(tracer);
+ kvfree(tracer);
}
static int fw_tracer_event(struct notifier_block *nb, unsigned long action, void *data)
From: Luke Nelson <[email protected]>
commit 50fe7ebb6475711c15b3397467e6424e20026d94 upstream.
The current JIT clobbers the destination register for BPF_JSET BPF_X
and BPF_K by using "and" and "or" instructions. This is fine when the
destination register is a temporary loaded from a register stored on
the stack but not otherwise.
This patch fixes the problem (for both BPF_K and BPF_X) by always loading
the destination register into temporaries since BPF_JSET should not
modify the destination register.
This bug may not be currently triggerable as BPF_REG_AX is the only
register not stored on the stack and the verifier uses it in a limited
way.
Fixes: 03f5781be2c7b ("bpf, x86_32: add eBPF JIT compiler for ia32")
Signed-off-by: Xi Wang <[email protected]>
Signed-off-by: Luke Nelson <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Wang YanQing <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/net/bpf_jit_comp32.c | 22 ++++++++++++++++++----
1 file changed, 18 insertions(+), 4 deletions(-)
--- a/arch/x86/net/bpf_jit_comp32.c
+++ b/arch/x86/net/bpf_jit_comp32.c
@@ -2015,8 +2015,8 @@ static int do_jit(struct bpf_prog *bpf_p
case BPF_JMP | BPF_JSET | BPF_X:
case BPF_JMP32 | BPF_JSET | BPF_X: {
bool is_jmp64 = BPF_CLASS(insn->code) == BPF_JMP;
- u8 dreg_lo = dstk ? IA32_EAX : dst_lo;
- u8 dreg_hi = dstk ? IA32_EDX : dst_hi;
+ u8 dreg_lo = IA32_EAX;
+ u8 dreg_hi = IA32_EDX;
u8 sreg_lo = sstk ? IA32_ECX : src_lo;
u8 sreg_hi = sstk ? IA32_EBX : src_hi;
@@ -2028,6 +2028,13 @@ static int do_jit(struct bpf_prog *bpf_p
add_2reg(0x40, IA32_EBP,
IA32_EDX),
STACK_VAR(dst_hi));
+ } else {
+ /* mov dreg_lo,dst_lo */
+ EMIT2(0x89, add_2reg(0xC0, dreg_lo, dst_lo));
+ if (is_jmp64)
+ /* mov dreg_hi,dst_hi */
+ EMIT2(0x89,
+ add_2reg(0xC0, dreg_hi, dst_hi));
}
if (sstk) {
@@ -2052,8 +2059,8 @@ static int do_jit(struct bpf_prog *bpf_p
case BPF_JMP | BPF_JSET | BPF_K:
case BPF_JMP32 | BPF_JSET | BPF_K: {
bool is_jmp64 = BPF_CLASS(insn->code) == BPF_JMP;
- u8 dreg_lo = dstk ? IA32_EAX : dst_lo;
- u8 dreg_hi = dstk ? IA32_EDX : dst_hi;
+ u8 dreg_lo = IA32_EAX;
+ u8 dreg_hi = IA32_EDX;
u8 sreg_lo = IA32_ECX;
u8 sreg_hi = IA32_EBX;
u32 hi;
@@ -2066,6 +2073,13 @@ static int do_jit(struct bpf_prog *bpf_p
add_2reg(0x40, IA32_EBP,
IA32_EDX),
STACK_VAR(dst_hi));
+ } else {
+ /* mov dreg_lo,dst_lo */
+ EMIT2(0x89, add_2reg(0xC0, dreg_lo, dst_lo));
+ if (is_jmp64)
+ /* mov dreg_hi,dst_hi */
+ EMIT2(0x89,
+ add_2reg(0xC0, dreg_hi, dst_hi));
}
/* mov ecx,imm32 */
From: Vitor Massaru Iha <[email protected]>
commit 63ec90f18204f2fe072df108de8a021b28b1b173 upstream.
In this workflow:
$ make ARCH=um defconfig && make ARCH=um -j8
[snip]
$ make ARCH=um mrproper
[snip]
$ make ARCH=um defconfig O=./build_um && make ARCH=um -j8 O=./build_um
[snip]
CC scripts/mod/empty.o
In file included from ../include/linux/types.h:6,
from ../include/linux/mod_devicetable.h:12,
from ../scripts/mod/devicetable-offsets.c:3:
../include/uapi/linux/types.h:5:10: fatal error: asm/types.h: No such file or directory
5 | #include <asm/types.h>
| ^~~~~~~~~~~~~
compilation terminated.
make[2]: *** [../scripts/Makefile.build:100: scripts/mod/devicetable-offsets.s] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/home/iha/sdb/opensource/lkmp/linux-kselftest.git/Makefile:1140: prepare0] Error 2
make[1]: Leaving directory '/home/iha/sdb/opensource/lkmp/linux-kselftest.git/build_um'
make: *** [Makefile:180: sub-make] Error 2
The cause of the error was because arch/$(SUBARCH)/include/generated files
weren't properly cleaned by `make ARCH=um mrproper`.
Fixes: a788b2ed81ab ("kbuild: check arch/$(SRCARCH)/include/generated before out-of-tree build")
Reported-by: Theodore Ts'o <[email protected]>
Suggested-by: Masahiro Yamada <[email protected]>
Signed-off-by: Vitor Massaru Iha <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Tested-by: Brendan Higgins <[email protected]>
Link: https://groups.google.com/forum/#!msg/kunit-dev/QmA27YEgEgI/hvS1kiz2CwAJ
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/um/Makefile | 1 +
1 file changed, 1 insertion(+)
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -140,6 +140,7 @@ export CFLAGS_vmlinux := $(LINK-y) $(LIN
# When cleaning we don't include .config, so we don't include
# TT or skas makefiles and don't clean skas_ptregs.h.
CLEAN_FILES += linux x.i gmon.out
+MRPROPER_DIRS += arch/$(SUBARCH)/include/generated
archclean:
@find . \( -name '*.bb' -o -name '*.bbg' -o -name '*.da' \
From: Luke Nelson <[email protected]>
[ Upstream commit aee194b14dd2b2bde6252b3acf57d36dccfc743a ]
This patch fixes an encoding bug in emit_stx for BPF_B when the source
register is BPF_REG_FP.
The current implementation for BPF_STX BPF_B in emit_stx saves one REX
byte when the operands can be encoded using Mod-R/M alone. The lower 8
bits of registers %rax, %rbx, %rcx, and %rdx can be accessed without using
a REX prefix via %al, %bl, %cl, and %dl, respectively. Other registers,
(e.g., %rsi, %rdi, %rbp, %rsp) require a REX prefix to use their 8-bit
equivalents (%sil, %dil, %bpl, %spl).
The current code checks if the source for BPF_STX BPF_B is BPF_REG_1
or BPF_REG_2 (which map to %rdi and %rsi), in which case it emits the
required REX prefix. However, it misses the case when the source is
BPF_REG_FP (mapped to %rbp).
The result is that BPF_STX BPF_B with BPF_REG_FP as the source operand
will read from register %ch instead of the correct %bpl. This patch fixes
the problem by fixing and refactoring the check on which registers need
the extra REX byte. Since no BPF registers map to %rsp, there is no need
to handle %spl.
Fixes: 622582786c9e0 ("net: filter: x86: internal BPF JIT")
Signed-off-by: Xi Wang <[email protected]>
Signed-off-by: Luke Nelson <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/net/bpf_jit_comp.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 991549a1c5f3a..18936533666e3 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -138,6 +138,19 @@ static bool is_ereg(u32 reg)
BIT(BPF_REG_AX));
}
+/*
+ * is_ereg_8l() == true if BPF register 'reg' is mapped to access x86-64
+ * lower 8-bit registers dil,sil,bpl,spl,r8b..r15b, which need extra byte
+ * of encoding. al,cl,dl,bl have simpler encoding.
+ */
+static bool is_ereg_8l(u32 reg)
+{
+ return is_ereg(reg) ||
+ (1 << reg) & (BIT(BPF_REG_1) |
+ BIT(BPF_REG_2) |
+ BIT(BPF_REG_FP));
+}
+
static bool is_axreg(u32 reg)
{
return reg == BPF_REG_0;
@@ -748,9 +761,8 @@ st: if (is_imm8(insn->off))
/* STX: *(u8*)(dst_reg + off) = src_reg */
case BPF_STX | BPF_MEM | BPF_B:
/* Emit 'mov byte ptr [rax + off], al' */
- if (is_ereg(dst_reg) || is_ereg(src_reg) ||
- /* We have to add extra byte for x86 SIL, DIL regs */
- src_reg == BPF_REG_1 || src_reg == BPF_REG_2)
+ if (is_ereg(dst_reg) || is_ereg_8l(src_reg))
+ /* Add extra byte for eregs or SIL,DIL,BPL in src_reg */
EMIT2(add_2mod(0x40, dst_reg, src_reg), 0x88);
else
EMIT1(0x88);
--
2.20.1
From: Atsushi Nemoto <[email protected]>
[ Upstream commit a7a0d6269652846671312b29992143f56e2866b8 ]
Allow all the RGMII modes to be used. (Not only "rgmii", "rgmii-id"
but "rgmii-txid", "rgmii-rxid")
Signed-off-by: Atsushi Nemoto <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index e0212d2fc2a12..fa32cd5b418ef 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -241,6 +241,8 @@ static int socfpga_set_phy_mode_common(int phymode, u32 *val)
switch (phymode) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
*val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII;
break;
case PHY_INTERFACE_MODE_MII:
--
2.20.1
From: Brian Foster <[email protected]>
commit 4b674b9ac852937af1f8c62f730c325fb6eadcdb upstream.
The filesystem freeze sequence in XFS waits on any background
eofblocks or cowblocks scans to complete before the filesystem is
quiesced. At this point, the freezer has already stopped the
transaction subsystem, however, which means a truncate or cowblock
cancellation in progress is likely blocked in transaction
allocation. This results in a deadlock between freeze and the
associated scanner.
Fix this problem by holding superblock write protection across calls
into the block reapers. Since protection for background scans is
acquired from the workqueue task context, trylock to avoid a similar
deadlock between freeze and blocking on the write lock.
Fixes: d6b636ebb1c9f ("xfs: halt auto-reclamation activities while rebuilding rmap")
Reported-by: Paul Furtado <[email protected]>
Signed-off-by: Brian Foster <[email protected]>
Reviewed-by: Chandan Rajendra <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Allison Collins <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/xfs/xfs_icache.c | 10 ++++++++++
fs/xfs/xfs_ioctl.c | 5 ++++-
2 files changed, 14 insertions(+), 1 deletion(-)
--- a/fs/xfs/xfs_icache.c
+++ b/fs/xfs/xfs_icache.c
@@ -907,7 +907,12 @@ xfs_eofblocks_worker(
{
struct xfs_mount *mp = container_of(to_delayed_work(work),
struct xfs_mount, m_eofblocks_work);
+
+ if (!sb_start_write_trylock(mp->m_super))
+ return;
xfs_icache_free_eofblocks(mp, NULL);
+ sb_end_write(mp->m_super);
+
xfs_queue_eofblocks(mp);
}
@@ -934,7 +939,12 @@ xfs_cowblocks_worker(
{
struct xfs_mount *mp = container_of(to_delayed_work(work),
struct xfs_mount, m_cowblocks_work);
+
+ if (!sb_start_write_trylock(mp->m_super))
+ return;
xfs_icache_free_cowblocks(mp, NULL);
+ sb_end_write(mp->m_super);
+
xfs_queue_cowblocks(mp);
}
--- a/fs/xfs/xfs_ioctl.c
+++ b/fs/xfs/xfs_ioctl.c
@@ -2401,7 +2401,10 @@ xfs_file_ioctl(
if (error)
return error;
- return xfs_icache_free_eofblocks(mp, &keofb);
+ sb_start_write(mp->m_super);
+ error = xfs_icache_free_eofblocks(mp, &keofb);
+ sb_end_write(mp->m_super);
+ return error;
}
default:
From: Raymond Pang <[email protected]>
commit 0325837c51cb7c9a5bd3e354ac0c0cda0667d50e upstream.
Some Zhaoxin endpoints are implemented as multi-function devices without an
ACS capability, but they actually don't support peer-to-peer transactions.
Add ACS quirks to declare DMA isolation.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Raymond Pang <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/quirks.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4759,6 +4759,10 @@ static const struct pci_dev_acs_enabled
{ PCI_VENDOR_ID_BROADCOM, 0xD714, pci_quirk_brcm_acs },
/* Amazon Annapurna Labs */
{ PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031, pci_quirk_al_acs },
+ /* Zhaoxin multi-function devices */
+ { PCI_VENDOR_ID_ZHAOXIN, 0x3038, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_ZHAOXIN, 0x3104, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_ZHAOXIN, 0x9083, pci_quirk_mf_endpoint_acs },
{ 0 }
};
From: Bjorn Helgaas <[email protected]>
commit c8de8ed2dcaac82e5d76d467dc0b02e0ee79809b upstream.
The ACS quirks differ in needless ways, which makes them look more
different than they really are.
Reorder the ACS flags in order of definitions in the spec:
PCI_ACS_SV Source Validation
PCI_ACS_TB Translation Blocking
PCI_ACS_RR P2P Request Redirect
PCI_ACS_CR P2P Completion Redirect
PCI_ACS_UF Upstream Forwarding
PCI_ACS_EC P2P Egress Control
PCI_ACS_DT Direct Translated P2P
(PCIe r5.0, sec 7.7.8.2) and use similar code structure in all. No
functional change intended.
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Alex Williamson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/quirks.c | 41 +++++++++++++++++++----------------------
1 file changed, 19 insertions(+), 22 deletions(-)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4422,18 +4422,18 @@ static bool pci_quirk_cavium_acs_match(s
static int pci_quirk_cavium_acs(struct pci_dev *dev, u16 acs_flags)
{
+ if (!pci_quirk_cavium_acs_match(dev))
+ return -ENOTTY;
+
/*
- * Cavium root ports don't advertise an ACS capability. However,
+ * Cavium Root Ports don't advertise an ACS capability. However,
* the RTL internally implements similar protection as if ACS had
- * Request Redirection, Completion Redirection, Source Validation,
+ * Source Validation, Request Redirection, Completion Redirection,
* and Upstream Forwarding features enabled. Assert that the
* hardware implements and enables equivalent ACS functionality for
* these flags.
*/
- acs_flags &= ~(PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_SV | PCI_ACS_UF);
-
- if (!pci_quirk_cavium_acs_match(dev))
- return -ENOTTY;
+ acs_flags &= ~(PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
return acs_flags ? 0 : 1;
}
@@ -4451,7 +4451,7 @@ static int pci_quirk_xgene_acs(struct pc
}
/*
- * Many Intel PCH root ports do provide ACS-like features to disable peer
+ * Many Intel PCH Root Ports do provide ACS-like features to disable peer
* transactions and validate bus numbers in requests, but do not provide an
* actual PCIe ACS capability. This is the list of device IDs known to fall
* into that category as provided by Intel in Red Hat bugzilla 1037684.
@@ -4499,37 +4499,34 @@ static bool pci_quirk_intel_pch_acs_matc
return false;
}
-#define INTEL_PCH_ACS_FLAGS (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_SV)
+#define INTEL_PCH_ACS_FLAGS (PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF)
static int pci_quirk_intel_pch_acs(struct pci_dev *dev, u16 acs_flags)
{
- u16 flags = dev->dev_flags & PCI_DEV_FLAGS_ACS_ENABLED_QUIRK ?
- INTEL_PCH_ACS_FLAGS : 0;
-
if (!pci_quirk_intel_pch_acs_match(dev))
return -ENOTTY;
- return acs_flags & ~flags ? 0 : 1;
+ if (dev->dev_flags & PCI_DEV_FLAGS_ACS_ENABLED_QUIRK)
+ acs_flags &= ~(INTEL_PCH_ACS_FLAGS);
+
+ return acs_flags ? 0 : 1;
}
/*
- * These QCOM root ports do provide ACS-like features to disable peer
+ * These QCOM Root Ports do provide ACS-like features to disable peer
* transactions and validate bus numbers in requests, but do not provide an
* actual PCIe ACS capability. Hardware supports source validation but it
* will report the issue as Completer Abort instead of ACS Violation.
- * Hardware doesn't support peer-to-peer and each root port is a root
- * complex with unique segment numbers. It is not possible for one root
- * port to pass traffic to another root port. All PCIe transactions are
- * terminated inside the root port.
+ * Hardware doesn't support peer-to-peer and each Root Port is a Root
+ * Complex with unique segment numbers. It is not possible for one Root
+ * Port to pass traffic to another Root Port. All PCIe transactions are
+ * terminated inside the Root Port.
*/
static int pci_quirk_qcom_rp_acs(struct pci_dev *dev, u16 acs_flags)
{
- u16 flags = (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_SV);
- int ret = acs_flags & ~flags ? 0 : 1;
-
- pci_info(dev, "Using QCOM ACS Quirk (%d)\n", ret);
+ acs_flags &= ~(PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
- return ret;
+ return acs_flags ? 0 : 1;
}
static int pci_quirk_al_acs(struct pci_dev *dev, u16 acs_flags)
From: Jason Gunthorpe <[email protected]>
commit c799fca8baf18d1bbbbad6c3b736eefbde8bdb90 upstream.
Positive return values are also failures that don't set val,
although this probably can't happen. Fixes gcc 10 warning:
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c: In function ‘t4_phy_fw_ver’:
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:3747:14: warning: ‘val’ may be used uninitialized in this function [-Wmaybe-uninitialized]
3747 | *phy_fw_ver = val;
Fixes: 01b6961410b7 ("cxgb4: Add PHY firmware support for T420-BT cards")
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -3748,7 +3748,7 @@ int t4_phy_fw_ver(struct adapter *adap,
FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_VERSION));
ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1,
¶m, &val);
- if (ret < 0)
+ if (ret)
return ret;
*phy_fw_ver = val;
return 0;
From: Syed Nayyar Waris <[email protected]>
commit fc069262261c43ed11d639dadcf982e79bfe652b upstream.
Add lock protection from race conditions to 104-quad-8 counter driver
generic interface code changes. Mutex calls used for protection.
Fixes: f1d8a071d45b ("counter: 104-quad-8: Add Generic Counter interface support")
Signed-off-by: Syed Nayyar Waris <[email protected]>
Signed-off-by: William Breathitt Gray <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/counter/104-quad-8.c | 194 +++++++++++++++++++++++++++++++++++--------
1 file changed, 160 insertions(+), 34 deletions(-)
--- a/drivers/counter/104-quad-8.c
+++ b/drivers/counter/104-quad-8.c
@@ -42,6 +42,7 @@ MODULE_PARM_DESC(base, "ACCES 104-QUAD-8
* @base: base port address of the IIO device
*/
struct quad8_iio {
+ struct mutex lock;
struct counter_device counter;
unsigned int preset[QUAD8_NUM_COUNTERS];
unsigned int count_mode[QUAD8_NUM_COUNTERS];
@@ -116,6 +117,8 @@ static int quad8_read_raw(struct iio_dev
/* Borrow XOR Carry effectively doubles count range */
*val = (borrow ^ carry) << 24;
+ mutex_lock(&priv->lock);
+
/* Reset Byte Pointer; transfer Counter to Output Latch */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
base_offset + 1);
@@ -123,6 +126,8 @@ static int quad8_read_raw(struct iio_dev
for (i = 0; i < 3; i++)
*val |= (unsigned int)inb(base_offset) << (8 * i);
+ mutex_unlock(&priv->lock);
+
return IIO_VAL_INT;
case IIO_CHAN_INFO_ENABLE:
*val = priv->ab_enable[chan->channel];
@@ -153,6 +158,8 @@ static int quad8_write_raw(struct iio_de
if ((unsigned int)val > 0xFFFFFF)
return -EINVAL;
+ mutex_lock(&priv->lock);
+
/* Reset Byte Pointer */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
@@ -176,12 +183,16 @@ static int quad8_write_raw(struct iio_de
/* Reset Error flag */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
+ mutex_unlock(&priv->lock);
+
return 0;
case IIO_CHAN_INFO_ENABLE:
/* only boolean values accepted */
if (val < 0 || val > 1)
return -EINVAL;
+ mutex_lock(&priv->lock);
+
priv->ab_enable[chan->channel] = val;
ior_cfg = val | priv->preset_enable[chan->channel] << 1;
@@ -189,11 +200,18 @@ static int quad8_write_raw(struct iio_de
/* Load I/O control configuration */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
+ mutex_unlock(&priv->lock);
+
return 0;
case IIO_CHAN_INFO_SCALE:
+ mutex_lock(&priv->lock);
+
/* Quadrature scaling only available in quadrature mode */
- if (!priv->quadrature_mode[chan->channel] && (val2 || val != 1))
+ if (!priv->quadrature_mode[chan->channel] &&
+ (val2 || val != 1)) {
+ mutex_unlock(&priv->lock);
return -EINVAL;
+ }
/* Only three gain states (1, 0.5, 0.25) */
if (val == 1 && !val2)
@@ -207,11 +225,15 @@ static int quad8_write_raw(struct iio_de
priv->quadrature_scale[chan->channel] = 2;
break;
default:
+ mutex_unlock(&priv->lock);
return -EINVAL;
}
- else
+ else {
+ mutex_unlock(&priv->lock);
return -EINVAL;
+ }
+ mutex_unlock(&priv->lock);
return 0;
}
@@ -248,6 +270,8 @@ static ssize_t quad8_write_preset(struct
if (preset > 0xFFFFFF)
return -EINVAL;
+ mutex_lock(&priv->lock);
+
priv->preset[chan->channel] = preset;
/* Reset Byte Pointer */
@@ -257,6 +281,8 @@ static ssize_t quad8_write_preset(struct
for (i = 0; i < 3; i++)
outb(preset >> (8 * i), base_offset);
+ mutex_unlock(&priv->lock);
+
return len;
}
@@ -286,6 +312,8 @@ static ssize_t quad8_write_set_to_preset
/* Preset enable is active low in Input/Output Control register */
preset_enable = !preset_enable;
+ mutex_lock(&priv->lock);
+
priv->preset_enable[chan->channel] = preset_enable;
ior_cfg = priv->ab_enable[chan->channel] |
@@ -294,6 +322,8 @@ static ssize_t quad8_write_set_to_preset
/* Load I/O control configuration to Input / Output Control Register */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return len;
}
@@ -351,6 +381,8 @@ static int quad8_set_count_mode(struct i
unsigned int mode_cfg = cnt_mode << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
+ mutex_lock(&priv->lock);
+
priv->count_mode[chan->channel] = cnt_mode;
/* Add quadrature mode configuration */
@@ -360,6 +392,8 @@ static int quad8_set_count_mode(struct i
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -387,19 +421,26 @@ static int quad8_set_synchronous_mode(st
const struct iio_chan_spec *chan, unsigned int synchronous_mode)
{
struct quad8_iio *const priv = iio_priv(indio_dev);
- const unsigned int idr_cfg = synchronous_mode |
- priv->index_polarity[chan->channel] << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
+ unsigned int idr_cfg = synchronous_mode;
+
+ mutex_lock(&priv->lock);
+
+ idr_cfg |= priv->index_polarity[chan->channel] << 1;
/* Index function must be non-synchronous in non-quadrature mode */
- if (synchronous_mode && !priv->quadrature_mode[chan->channel])
+ if (synchronous_mode && !priv->quadrature_mode[chan->channel]) {
+ mutex_unlock(&priv->lock);
return -EINVAL;
+ }
priv->synchronous_mode[chan->channel] = synchronous_mode;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -427,8 +468,12 @@ static int quad8_set_quadrature_mode(str
const struct iio_chan_spec *chan, unsigned int quadrature_mode)
{
struct quad8_iio *const priv = iio_priv(indio_dev);
- unsigned int mode_cfg = priv->count_mode[chan->channel] << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
+ unsigned int mode_cfg;
+
+ mutex_lock(&priv->lock);
+
+ mode_cfg = priv->count_mode[chan->channel] << 1;
if (quadrature_mode)
mode_cfg |= (priv->quadrature_scale[chan->channel] + 1) << 3;
@@ -446,6 +491,8 @@ static int quad8_set_quadrature_mode(str
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -473,15 +520,20 @@ static int quad8_set_index_polarity(stru
const struct iio_chan_spec *chan, unsigned int index_polarity)
{
struct quad8_iio *const priv = iio_priv(indio_dev);
- const unsigned int idr_cfg = priv->synchronous_mode[chan->channel] |
- index_polarity << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
+ unsigned int idr_cfg = index_polarity << 1;
+
+ mutex_lock(&priv->lock);
+
+ idr_cfg |= priv->synchronous_mode[chan->channel];
priv->index_polarity[chan->channel] = index_polarity;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -585,7 +637,7 @@ static int quad8_signal_read(struct coun
static int quad8_count_read(struct counter_device *counter,
struct counter_count *count, struct counter_count_read_value *val)
{
- const struct quad8_iio *const priv = counter->priv;
+ struct quad8_iio *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id;
unsigned int flags;
unsigned int borrow;
@@ -600,6 +652,8 @@ static int quad8_count_read(struct count
/* Borrow XOR Carry effectively doubles count range */
position = (unsigned long)(borrow ^ carry) << 24;
+ mutex_lock(&priv->lock);
+
/* Reset Byte Pointer; transfer Counter to Output Latch */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
base_offset + 1);
@@ -609,13 +663,15 @@ static int quad8_count_read(struct count
counter_count_read_value_set(val, COUNTER_COUNT_POSITION, &position);
+ mutex_unlock(&priv->lock);
+
return 0;
}
static int quad8_count_write(struct counter_device *counter,
struct counter_count *count, struct counter_count_write_value *val)
{
- const struct quad8_iio *const priv = counter->priv;
+ struct quad8_iio *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id;
int err;
unsigned long position;
@@ -630,6 +686,8 @@ static int quad8_count_write(struct coun
if (position > 0xFFFFFF)
return -EINVAL;
+ mutex_lock(&priv->lock);
+
/* Reset Byte Pointer */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
@@ -653,6 +711,8 @@ static int quad8_count_write(struct coun
/* Reset Error flag */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -673,13 +733,13 @@ static enum counter_count_function quad8
static int quad8_function_get(struct counter_device *counter,
struct counter_count *count, size_t *function)
{
- const struct quad8_iio *const priv = counter->priv;
+ struct quad8_iio *const priv = counter->priv;
const int id = count->id;
- const unsigned int quadrature_mode = priv->quadrature_mode[id];
- const unsigned int scale = priv->quadrature_scale[id];
- if (quadrature_mode)
- switch (scale) {
+ mutex_lock(&priv->lock);
+
+ if (priv->quadrature_mode[id])
+ switch (priv->quadrature_scale[id]) {
case 0:
*function = QUAD8_COUNT_FUNCTION_QUADRATURE_X1;
break;
@@ -693,6 +753,8 @@ static int quad8_function_get(struct cou
else
*function = QUAD8_COUNT_FUNCTION_PULSE_DIRECTION;
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -703,10 +765,15 @@ static int quad8_function_set(struct cou
const int id = count->id;
unsigned int *const quadrature_mode = priv->quadrature_mode + id;
unsigned int *const scale = priv->quadrature_scale + id;
- unsigned int mode_cfg = priv->count_mode[id] << 1;
unsigned int *const synchronous_mode = priv->synchronous_mode + id;
- const unsigned int idr_cfg = priv->index_polarity[id] << 1;
const int base_offset = priv->base + 2 * id + 1;
+ unsigned int mode_cfg;
+ unsigned int idr_cfg;
+
+ mutex_lock(&priv->lock);
+
+ mode_cfg = priv->count_mode[id] << 1;
+ idr_cfg = priv->index_polarity[id] << 1;
if (function == QUAD8_COUNT_FUNCTION_PULSE_DIRECTION) {
*quadrature_mode = 0;
@@ -742,6 +809,8 @@ static int quad8_function_set(struct cou
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -858,15 +927,20 @@ static int quad8_index_polarity_set(stru
{
struct quad8_iio *const priv = counter->priv;
const size_t channel_id = signal->id - 16;
- const unsigned int idr_cfg = priv->synchronous_mode[channel_id] |
- index_polarity << 1;
const int base_offset = priv->base + 2 * channel_id + 1;
+ unsigned int idr_cfg = index_polarity << 1;
+
+ mutex_lock(&priv->lock);
+
+ idr_cfg |= priv->synchronous_mode[channel_id];
priv->index_polarity[channel_id] = index_polarity;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -893,19 +967,26 @@ static int quad8_synchronous_mode_set(st
{
struct quad8_iio *const priv = counter->priv;
const size_t channel_id = signal->id - 16;
- const unsigned int idr_cfg = synchronous_mode |
- priv->index_polarity[channel_id] << 1;
const int base_offset = priv->base + 2 * channel_id + 1;
+ unsigned int idr_cfg = synchronous_mode;
+
+ mutex_lock(&priv->lock);
+
+ idr_cfg |= priv->index_polarity[channel_id] << 1;
/* Index function must be non-synchronous in non-quadrature mode */
- if (synchronous_mode && !priv->quadrature_mode[channel_id])
+ if (synchronous_mode && !priv->quadrature_mode[channel_id]) {
+ mutex_unlock(&priv->lock);
return -EINVAL;
+ }
priv->synchronous_mode[channel_id] = synchronous_mode;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -970,6 +1051,8 @@ static int quad8_count_mode_set(struct c
break;
}
+ mutex_lock(&priv->lock);
+
priv->count_mode[count->id] = cnt_mode;
/* Set count mode configuration value */
@@ -982,6 +1065,8 @@ static int quad8_count_mode_set(struct c
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -1023,6 +1108,8 @@ static ssize_t quad8_count_enable_write(
if (err)
return err;
+ mutex_lock(&priv->lock);
+
priv->ab_enable[count->id] = ab_enable;
ior_cfg = ab_enable | priv->preset_enable[count->id] << 1;
@@ -1030,6 +1117,8 @@ static ssize_t quad8_count_enable_write(
/* Load I/O control configuration */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
+ mutex_unlock(&priv->lock);
+
return len;
}
@@ -1058,14 +1147,28 @@ static ssize_t quad8_count_preset_read(s
return sprintf(buf, "%u\n", priv->preset[count->id]);
}
+static void quad8_preset_register_set(struct quad8_iio *quad8iio, int id,
+ unsigned int preset)
+{
+ const unsigned int base_offset = quad8iio->base + 2 * id;
+ int i;
+
+ quad8iio->preset[id] = preset;
+
+ /* Reset Byte Pointer */
+ outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
+
+ /* Set Preset Register */
+ for (i = 0; i < 3; i++)
+ outb(preset >> (8 * i), base_offset);
+}
+
static ssize_t quad8_count_preset_write(struct counter_device *counter,
struct counter_count *count, void *private, const char *buf, size_t len)
{
struct quad8_iio *const priv = counter->priv;
- const int base_offset = priv->base + 2 * count->id;
unsigned int preset;
int ret;
- int i;
ret = kstrtouint(buf, 0, &preset);
if (ret)
@@ -1075,14 +1178,11 @@ static ssize_t quad8_count_preset_write(
if (preset > 0xFFFFFF)
return -EINVAL;
- priv->preset[count->id] = preset;
+ mutex_lock(&priv->lock);
- /* Reset Byte Pointer */
- outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
+ quad8_preset_register_set(priv, count->id, preset);
- /* Set Preset Register */
- for (i = 0; i < 3; i++)
- outb(preset >> (8 * i), base_offset);
+ mutex_unlock(&priv->lock);
return len;
}
@@ -1090,15 +1190,20 @@ static ssize_t quad8_count_preset_write(
static ssize_t quad8_count_ceiling_read(struct counter_device *counter,
struct counter_count *count, void *private, char *buf)
{
- const struct quad8_iio *const priv = counter->priv;
+ struct quad8_iio *const priv = counter->priv;
+
+ mutex_lock(&priv->lock);
/* Range Limit and Modulo-N count modes use preset value as ceiling */
switch (priv->count_mode[count->id]) {
case 1:
case 3:
- return quad8_count_preset_read(counter, count, private, buf);
+ mutex_unlock(&priv->lock);
+ return sprintf(buf, "%u\n", priv->preset[count->id]);
}
+ mutex_unlock(&priv->lock);
+
/* By default 0x1FFFFFF (25 bits unsigned) is maximum count */
return sprintf(buf, "33554431\n");
}
@@ -1107,15 +1212,29 @@ static ssize_t quad8_count_ceiling_write
struct counter_count *count, void *private, const char *buf, size_t len)
{
struct quad8_iio *const priv = counter->priv;
+ unsigned int ceiling;
+ int ret;
+
+ ret = kstrtouint(buf, 0, &ceiling);
+ if (ret)
+ return ret;
+
+ /* Only 24-bit values are supported */
+ if (ceiling > 0xFFFFFF)
+ return -EINVAL;
+
+ mutex_lock(&priv->lock);
/* Range Limit and Modulo-N count modes use preset value as ceiling */
switch (priv->count_mode[count->id]) {
case 1:
case 3:
- return quad8_count_preset_write(counter, count, private, buf,
- len);
+ quad8_preset_register_set(priv, count->id, ceiling);
+ break;
}
+ mutex_unlock(&priv->lock);
+
return len;
}
@@ -1143,6 +1262,8 @@ static ssize_t quad8_count_preset_enable
/* Preset enable is active low in Input/Output Control register */
preset_enable = !preset_enable;
+ mutex_lock(&priv->lock);
+
priv->preset_enable[count->id] = preset_enable;
ior_cfg = priv->ab_enable[count->id] | (unsigned int)preset_enable << 1;
@@ -1150,6 +1271,8 @@ static ssize_t quad8_count_preset_enable
/* Load I/O control configuration to Input / Output Control Register */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return len;
}
@@ -1320,6 +1443,9 @@ static int quad8_probe(struct device *de
quad8iio->counter.priv = quad8iio;
quad8iio->base = base[id];
+ /* Initialize mutex */
+ mutex_init(&quad8iio->lock);
+
/* Reset all counters and disable interrupt function */
outb(QUAD8_CHAN_OP_RESET_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
/* Set initial configuration for all counters */
From: Stephan Gerhold <[email protected]>
commit 0c824ec094b5cda766c80d88c2036e28c24a4cb1 upstream.
For some reason, the MI2S DAIs do not have channels_min/max defined.
This means that snd_soc_dai_stream_valid() returns false,
i.e. the DAIs have neither valid playback nor capture stream.
It's quite surprising that this ever worked correctly,
but in 5.7-rc1 this is now failing badly: :)
Commit 0e9cf4c452ad ("ASoC: pcm: check if cpu-dai supports a given stream")
introduced a check for snd_soc_dai_stream_valid() before calling
hw_params(), which means that the q6i2s_hw_params() function
was never called, eventually resulting in:
qcom-q6afe aprsvc:q6afe:4:4: no line is assigned
... even though "qcom,sd-lines" is set in the device tree.
Commit 9b5db059366a ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported")
now even avoids creating PCM devices if the stream is not supported,
which means that it is failing even earlier with e.g.:
Primary MI2S: ASoC: no backend playback stream
Avoid all that trouble by adding channels_min/max for the MI2S DAIs.
Fixes: 24c4cbcfac09 ("ASoC: qdsp6: q6afe: Add q6afe dai driver")
Signed-off-by: Stephan Gerhold <[email protected]>
Reviewed-by: Srinivas Kandagatla <[email protected]>
Cc: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/qcom/qdsp6/q6afe-dai.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
--- a/sound/soc/qcom/qdsp6/q6afe-dai.c
+++ b/sound/soc/qcom/qdsp6/q6afe-dai.c
@@ -902,6 +902,8 @@ static struct snd_soc_dai_driver q6afe_d
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
@@ -917,6 +919,8 @@ static struct snd_soc_dai_driver q6afe_d
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
@@ -931,6 +935,8 @@ static struct snd_soc_dai_driver q6afe_d
.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 |
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
@@ -946,6 +952,8 @@ static struct snd_soc_dai_driver q6afe_d
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
@@ -960,6 +968,8 @@ static struct snd_soc_dai_driver q6afe_d
.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 |
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
@@ -975,6 +985,8 @@ static struct snd_soc_dai_driver q6afe_d
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
@@ -989,6 +1001,8 @@ static struct snd_soc_dai_driver q6afe_d
.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 |
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
@@ -1004,6 +1018,8 @@ static struct snd_soc_dai_driver q6afe_d
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
From: Philipp Rudo <[email protected]>
commit 8ebf6da9db1b2a20bb86cc1bee2552e894d03308 upstream.
Switching tracers include instruction patching. To prevent that a
instruction is patched while it's read the instruction patching is done
in stop_machine 'context'. This also means that any function called
during stop_machine must not be traced. Thus add 'notrace' to all
functions called within stop_machine.
Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls")
Fixes: 38f2c691a4b3 ("s390: improve wait logic of stop_machine")
Fixes: 4ecf0a43e729 ("processor: get rid of cpu_relax_yield")
Signed-off-by: Philipp Rudo <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/kernel/diag.c | 2 +-
arch/s390/kernel/smp.c | 4 ++--
arch/s390/kernel/trace.c | 2 +-
3 files changed, 4 insertions(+), 4 deletions(-)
--- a/arch/s390/kernel/diag.c
+++ b/arch/s390/kernel/diag.c
@@ -133,7 +133,7 @@ void diag_stat_inc(enum diag_stat_enum n
}
EXPORT_SYMBOL(diag_stat_inc);
-void diag_stat_inc_norecursion(enum diag_stat_enum nr)
+void notrace diag_stat_inc_norecursion(enum diag_stat_enum nr)
{
this_cpu_inc(diag_stat.counter[nr]);
trace_s390_diagnose_norecursion(diag_map[nr].code);
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -403,7 +403,7 @@ int smp_find_processor_id(u16 address)
return -1;
}
-bool arch_vcpu_is_preempted(int cpu)
+bool notrace arch_vcpu_is_preempted(int cpu)
{
if (test_cpu_flag_of(CIF_ENABLED_WAIT, cpu))
return false;
@@ -413,7 +413,7 @@ bool arch_vcpu_is_preempted(int cpu)
}
EXPORT_SYMBOL(arch_vcpu_is_preempted);
-void smp_yield_cpu(int cpu)
+void notrace smp_yield_cpu(int cpu)
{
if (MACHINE_HAS_DIAG9C) {
diag_stat_inc_norecursion(DIAG_STAT_X09C);
--- a/arch/s390/kernel/trace.c
+++ b/arch/s390/kernel/trace.c
@@ -14,7 +14,7 @@ EXPORT_TRACEPOINT_SYMBOL(s390_diagnose);
static DEFINE_PER_CPU(unsigned int, diagnose_trace_depth);
-void trace_s390_diagnose_norecursion(int diag_nr)
+void notrace trace_s390_diagnose_norecursion(int diag_nr)
{
unsigned long flags;
unsigned int *depth;
From: Theodore Ts'o <[email protected]>
[ Upstream commit a17a9d935dc4a50acefaf319d58030f1da7f115a ]
Current wait times have proven to be too short to protect against inode
reuses that lead to metadata inconsistencies.
Now that we will retry the inode allocation if we can't find any
recently deleted inodes, it's a lot safer to increase the recently
deleted time from 5 seconds to a minute.
Link: https://lore.kernel.org/r/[email protected]
Google-Bug-Id: 36602237
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ext4/ialloc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index a6288730210e8..64b6549dd9016 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -660,7 +660,7 @@ static int find_group_other(struct super_block *sb, struct inode *parent,
* block has been written back to disk. (Yes, these values are
* somewhat arbitrary...)
*/
-#define RECENTCY_MIN 5
+#define RECENTCY_MIN 60
#define RECENTCY_DIRTY 300
static int recently_deleted(struct super_block *sb, ext4_group_t group, int ino)
--
2.20.1
From: Chuck Lever <[email protected]>
commit e28b4fc652c1830796a4d3e09565f30c20f9a2cf upstream.
I hit this while testing nfsd-5.7 with kernel memory debugging
enabled on my server:
Mar 30 13:21:45 klimt kernel: BUG: unable to handle page fault for address: ffff8887e6c279a8
Mar 30 13:21:45 klimt kernel: #PF: supervisor read access in kernel mode
Mar 30 13:21:45 klimt kernel: #PF: error_code(0x0000) - not-present page
Mar 30 13:21:45 klimt kernel: PGD 3601067 P4D 3601067 PUD 87c519067 PMD 87c3e2067 PTE 800ffff8193d8060
Mar 30 13:21:45 klimt kernel: Oops: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
Mar 30 13:21:45 klimt kernel: CPU: 2 PID: 1933 Comm: nfsd Not tainted 5.6.0-rc6-00040-g881e87a3c6f9 #1591
Mar 30 13:21:45 klimt kernel: Hardware name: Supermicro Super Server/X10SRL-F, BIOS 1.0c 09/09/2015
Mar 30 13:21:45 klimt kernel: RIP: 0010:svc_rdma_post_chunk_ctxt+0xab/0x284 [rpcrdma]
Mar 30 13:21:45 klimt kernel: Code: c1 83 34 02 00 00 29 d0 85 c0 7e 72 48 8b bb a0 02 00 00 48 8d 54 24 08 4c 89 e6 48 8b 07 48 8b 40 20 e8 5a 5c 2b e1 41 89 c6 <8b> 45 20 89 44 24 04 8b 05 02 e9 01 00 85 c0 7e 33 e9 5e 01 00 00
Mar 30 13:21:45 klimt kernel: RSP: 0018:ffffc90000dfbdd8 EFLAGS: 00010286
Mar 30 13:21:45 klimt kernel: RAX: 0000000000000000 RBX: ffff8887db8db400 RCX: 0000000000000030
Mar 30 13:21:45 klimt kernel: RDX: 0000000000000040 RSI: 0000000000000000 RDI: 0000000000000246
Mar 30 13:21:45 klimt kernel: RBP: ffff8887e6c27988 R08: 0000000000000000 R09: 0000000000000004
Mar 30 13:21:45 klimt kernel: R10: ffffc90000dfbdd8 R11: 00c068ef00000000 R12: ffff8887eb4e4a80
Mar 30 13:21:45 klimt kernel: R13: ffff8887db8db634 R14: 0000000000000000 R15: ffff8887fc931000
Mar 30 13:21:45 klimt kernel: FS: 0000000000000000(0000) GS:ffff88885bd00000(0000) knlGS:0000000000000000
Mar 30 13:21:45 klimt kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Mar 30 13:21:45 klimt kernel: CR2: ffff8887e6c279a8 CR3: 000000081b72e002 CR4: 00000000001606e0
Mar 30 13:21:45 klimt kernel: Call Trace:
Mar 30 13:21:45 klimt kernel: ? svc_rdma_vec_to_sg+0x7f/0x7f [rpcrdma]
Mar 30 13:21:45 klimt kernel: svc_rdma_send_write_chunk+0x59/0xce [rpcrdma]
Mar 30 13:21:45 klimt kernel: svc_rdma_sendto+0xf9/0x3ae [rpcrdma]
Mar 30 13:21:45 klimt kernel: ? nfsd_destroy+0x51/0x51 [nfsd]
Mar 30 13:21:45 klimt kernel: svc_send+0x105/0x1e3 [sunrpc]
Mar 30 13:21:45 klimt kernel: nfsd+0xf2/0x149 [nfsd]
Mar 30 13:21:45 klimt kernel: kthread+0xf6/0xfb
Mar 30 13:21:45 klimt kernel: ? kthread_queue_delayed_work+0x74/0x74
Mar 30 13:21:45 klimt kernel: ret_from_fork+0x3a/0x50
Mar 30 13:21:45 klimt kernel: Modules linked in: ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue ib_umad ib_ipoib mlx4_ib sb_edac x86_pkg_temp_thermal iTCO_wdt iTCO_vendor_support coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel glue_helper crypto_simd cryptd pcspkr rpcrdma i2c_i801 rdma_ucm lpc_ich mfd_core ib_iser rdma_cm iw_cm ib_cm mei_me raid0 libiscsi mei sg scsi_transport_iscsi ioatdma wmi ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter nfsd nfs_acl lockd auth_rpcgss grace sunrpc ip_tables xfs libcrc32c mlx4_en sd_mod sr_mod cdrom mlx4_core crc32c_intel igb nvme i2c_algo_bit ahci i2c_core libahci nvme_core dca libata t10_pi qedr dm_mirror dm_region_hash dm_log dm_mod dax qede qed crc8 ib_uverbs ib_core
Mar 30 13:21:45 klimt kernel: CR2: ffff8887e6c279a8
Mar 30 13:21:45 klimt kernel: ---[ end trace 87971d2ad3429424 ]---
It's absolutely not safe to use resources pointed to by the @send_wr
argument of ib_post_send() _after_ that function returns. Those
resources are typically freed by the Send completion handler, which
can run before ib_post_send() returns.
Thus the trace points currently around ib_post_send() in the
server's RPC/RDMA transport are a hazard, even when they are
disabled. Rearrange them so that they touch the Work Request only
_before_ ib_post_send() is invoked.
Fixes: bd2abef33394 ("svcrdma: Trace key RDMA API events")
Fixes: 4201c7464753 ("svcrdma: Introduce svc_rdma_send_ctxt")
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/trace/events/rpcrdma.h | 50 ++++++++++++++++++++++++----------
net/sunrpc/xprtrdma/svc_rdma_rw.c | 3 --
net/sunrpc/xprtrdma/svc_rdma_sendto.c | 16 ++++++----
3 files changed, 46 insertions(+), 23 deletions(-)
--- a/include/trace/events/rpcrdma.h
+++ b/include/trace/events/rpcrdma.h
@@ -1638,17 +1638,15 @@ DECLARE_EVENT_CLASS(svcrdma_sendcomp_eve
TRACE_EVENT(svcrdma_post_send,
TP_PROTO(
- const struct ib_send_wr *wr,
- int status
+ const struct ib_send_wr *wr
),
- TP_ARGS(wr, status),
+ TP_ARGS(wr),
TP_STRUCT__entry(
__field(const void *, cqe)
__field(unsigned int, num_sge)
__field(u32, inv_rkey)
- __field(int, status)
),
TP_fast_assign(
@@ -1656,12 +1654,11 @@ TRACE_EVENT(svcrdma_post_send,
__entry->num_sge = wr->num_sge;
__entry->inv_rkey = (wr->opcode == IB_WR_SEND_WITH_INV) ?
wr->ex.invalidate_rkey : 0;
- __entry->status = status;
),
- TP_printk("cqe=%p num_sge=%u inv_rkey=0x%08x status=%d",
+ TP_printk("cqe=%p num_sge=%u inv_rkey=0x%08x",
__entry->cqe, __entry->num_sge,
- __entry->inv_rkey, __entry->status
+ __entry->inv_rkey
)
);
@@ -1726,26 +1723,23 @@ TRACE_EVENT(svcrdma_wc_receive,
TRACE_EVENT(svcrdma_post_rw,
TP_PROTO(
const void *cqe,
- int sqecount,
- int status
+ int sqecount
),
- TP_ARGS(cqe, sqecount, status),
+ TP_ARGS(cqe, sqecount),
TP_STRUCT__entry(
__field(const void *, cqe)
__field(int, sqecount)
- __field(int, status)
),
TP_fast_assign(
__entry->cqe = cqe;
__entry->sqecount = sqecount;
- __entry->status = status;
),
- TP_printk("cqe=%p sqecount=%d status=%d",
- __entry->cqe, __entry->sqecount, __entry->status
+ TP_printk("cqe=%p sqecount=%d",
+ __entry->cqe, __entry->sqecount
)
);
@@ -1841,6 +1835,34 @@ DECLARE_EVENT_CLASS(svcrdma_sendqueue_ev
DEFINE_SQ_EVENT(full);
DEFINE_SQ_EVENT(retry);
+TRACE_EVENT(svcrdma_sq_post_err,
+ TP_PROTO(
+ const struct svcxprt_rdma *rdma,
+ int status
+ ),
+
+ TP_ARGS(rdma, status),
+
+ TP_STRUCT__entry(
+ __field(int, avail)
+ __field(int, depth)
+ __field(int, status)
+ __string(addr, rdma->sc_xprt.xpt_remotebuf)
+ ),
+
+ TP_fast_assign(
+ __entry->avail = atomic_read(&rdma->sc_sq_avail);
+ __entry->depth = rdma->sc_sq_depth;
+ __entry->status = status;
+ __assign_str(addr, rdma->sc_xprt.xpt_remotebuf);
+ ),
+
+ TP_printk("addr=%s sc_sq_avail=%d/%d status=%d",
+ __get_str(addr), __entry->avail, __entry->depth,
+ __entry->status
+ )
+);
+
#endif /* _TRACE_RPCRDMA_H */
#include <trace/define_trace.h>
--- a/net/sunrpc/xprtrdma/svc_rdma_rw.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_rw.c
@@ -323,8 +323,6 @@ static int svc_rdma_post_chunk_ctxt(stru
if (atomic_sub_return(cc->cc_sqecount,
&rdma->sc_sq_avail) > 0) {
ret = ib_post_send(rdma->sc_qp, first_wr, &bad_wr);
- trace_svcrdma_post_rw(&cc->cc_cqe,
- cc->cc_sqecount, ret);
if (ret)
break;
return 0;
@@ -337,6 +335,7 @@ static int svc_rdma_post_chunk_ctxt(stru
trace_svcrdma_sq_retry(rdma);
} while (1);
+ trace_svcrdma_sq_post_err(rdma, ret);
set_bit(XPT_CLOSE, &xprt->xpt_flags);
/* If even one was posted, there will be a completion. */
--- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
@@ -306,15 +306,17 @@ int svc_rdma_send(struct svcxprt_rdma *r
}
svc_xprt_get(&rdma->sc_xprt);
+ trace_svcrdma_post_send(wr);
ret = ib_post_send(rdma->sc_qp, wr, NULL);
- trace_svcrdma_post_send(wr, ret);
- if (ret) {
- set_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags);
- svc_xprt_put(&rdma->sc_xprt);
- wake_up(&rdma->sc_send_wait);
- }
- break;
+ if (ret)
+ break;
+ return 0;
}
+
+ trace_svcrdma_sq_post_err(rdma, ret);
+ set_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags);
+ svc_xprt_put(&rdma->sc_xprt);
+ wake_up(&rdma->sc_send_wait);
return ret;
}
From: David Howells <[email protected]>
commit c4bfda16d1b40d1c5941c61b5aa336bdd2d9904a upstream.
When an operation is meant to be done uninterruptibly (such as
FS.StoreData), we should not be allowing volume and server record checking
to be interrupted.
Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/internal.h | 2 +-
fs/afs/rotate.c | 6 +++---
fs/afs/server.c | 7 ++-----
fs/afs/volume.c | 8 +++++---
4 files changed, 11 insertions(+), 12 deletions(-)
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -1329,7 +1329,7 @@ extern struct afs_volume *afs_create_vol
extern void afs_activate_volume(struct afs_volume *);
extern void afs_deactivate_volume(struct afs_volume *);
extern void afs_put_volume(struct afs_cell *, struct afs_volume *);
-extern int afs_check_volume_status(struct afs_volume *, struct key *);
+extern int afs_check_volume_status(struct afs_volume *, struct afs_fs_cursor *);
/*
* write.c
--- a/fs/afs/rotate.c
+++ b/fs/afs/rotate.c
@@ -192,7 +192,7 @@ bool afs_select_fileserver(struct afs_fs
write_unlock(&vnode->volume->servers_lock);
set_bit(AFS_VOLUME_NEEDS_UPDATE, &vnode->volume->flags);
- error = afs_check_volume_status(vnode->volume, fc->key);
+ error = afs_check_volume_status(vnode->volume, fc);
if (error < 0)
goto failed_set_error;
@@ -281,7 +281,7 @@ bool afs_select_fileserver(struct afs_fs
set_bit(AFS_VOLUME_WAIT, &vnode->volume->flags);
set_bit(AFS_VOLUME_NEEDS_UPDATE, &vnode->volume->flags);
- error = afs_check_volume_status(vnode->volume, fc->key);
+ error = afs_check_volume_status(vnode->volume, fc);
if (error < 0)
goto failed_set_error;
@@ -341,7 +341,7 @@ start:
/* See if we need to do an update of the volume record. Note that the
* volume may have moved or even have been deleted.
*/
- error = afs_check_volume_status(vnode->volume, fc->key);
+ error = afs_check_volume_status(vnode->volume, fc);
if (error < 0)
goto failed_set_error;
--- a/fs/afs/server.c
+++ b/fs/afs/server.c
@@ -595,12 +595,9 @@ retry:
}
ret = wait_on_bit(&server->flags, AFS_SERVER_FL_UPDATING,
- TASK_INTERRUPTIBLE);
+ (fc->flags & AFS_FS_CURSOR_INTR) ?
+ TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
if (ret == -ERESTARTSYS) {
- if (!(fc->flags & AFS_FS_CURSOR_INTR) && server->addresses) {
- _leave(" = t [intr]");
- return true;
- }
fc->error = ret;
_leave(" = f [intr]");
return false;
--- a/fs/afs/volume.c
+++ b/fs/afs/volume.c
@@ -281,7 +281,7 @@ error:
/*
* Make sure the volume record is up to date.
*/
-int afs_check_volume_status(struct afs_volume *volume, struct key *key)
+int afs_check_volume_status(struct afs_volume *volume, struct afs_fs_cursor *fc)
{
time64_t now = ktime_get_real_seconds();
int ret, retries = 0;
@@ -299,7 +299,7 @@ retry:
}
if (!test_and_set_bit_lock(AFS_VOLUME_UPDATING, &volume->flags)) {
- ret = afs_update_volume_status(volume, key);
+ ret = afs_update_volume_status(volume, fc->key);
clear_bit_unlock(AFS_VOLUME_WAIT, &volume->flags);
clear_bit_unlock(AFS_VOLUME_UPDATING, &volume->flags);
wake_up_bit(&volume->flags, AFS_VOLUME_WAIT);
@@ -312,7 +312,9 @@ retry:
return 0;
}
- ret = wait_on_bit(&volume->flags, AFS_VOLUME_WAIT, TASK_INTERRUPTIBLE);
+ ret = wait_on_bit(&volume->flags, AFS_VOLUME_WAIT,
+ (fc->flags & AFS_FS_CURSOR_INTR) ?
+ TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
if (ret == -ERESTARTSYS) {
_leave(" = %d", ret);
return ret;
From: David Howells <[email protected]>
commit 0e631eee17dcea576ab922fa70e4fdbd596ee452 upstream.
Fix the DATA packet transmission to disable nofrag for UDPv4 on an AF_INET6
socket as well as UDPv6 when trying to transmit fragmentably.
Without this, packets filled to the normal size used by the kernel AFS
client of 1412 bytes be rejected by udp_sendmsg() with EMSGSIZE
immediately. The ->sk_error_report() notification hook is called, but
rxrpc doesn't generate a trace for it.
This is a temporary fix; a more permanent solution needs to involve
changing the size of the packets being filled in accordance with the MTU,
which isn't currently done in AF_RXRPC. The reason for not doing so was
that, barring the last packet in an rx jumbo packet, jumbos can only be
assembled out of 1412-byte packets - and the plan was to construct jumbos
on the fly at transmission time.
Also, there's no point turning on IPV6_MTU_DISCOVER, since IPv6 has to
engage in this anyway since fragmentation is only done by the sender. We
can then condense the switch-statement in rxrpc_send_data_packet().
Fixes: 75b54cb57ca3 ("rxrpc: Add IPv6 support")
Signed-off-by: David Howells <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/rxrpc/local_object.c | 9 ---------
net/rxrpc/output.c | 42 +++++++++++-------------------------------
2 files changed, 11 insertions(+), 40 deletions(-)
--- a/net/rxrpc/local_object.c
+++ b/net/rxrpc/local_object.c
@@ -165,15 +165,6 @@ static int rxrpc_open_socket(struct rxrp
goto error;
}
- /* we want to set the don't fragment bit */
- opt = IPV6_PMTUDISC_DO;
- ret = kernel_setsockopt(local->socket, SOL_IPV6, IPV6_MTU_DISCOVER,
- (char *) &opt, sizeof(opt));
- if (ret < 0) {
- _debug("setsockopt failed");
- goto error;
- }
-
/* Fall through and set IPv4 options too otherwise we don't get
* errors from IPv4 packets sent through the IPv6 socket.
*/
--- a/net/rxrpc/output.c
+++ b/net/rxrpc/output.c
@@ -474,41 +474,21 @@ send_fragmentable:
skb->tstamp = ktime_get_real();
switch (conn->params.local->srx.transport.family) {
+ case AF_INET6:
case AF_INET:
opt = IP_PMTUDISC_DONT;
- ret = kernel_setsockopt(conn->params.local->socket,
- SOL_IP, IP_MTU_DISCOVER,
- (char *)&opt, sizeof(opt));
- if (ret == 0) {
- ret = kernel_sendmsg(conn->params.local->socket, &msg,
- iov, 2, len);
- conn->params.peer->last_tx_at = ktime_get_seconds();
-
- opt = IP_PMTUDISC_DO;
- kernel_setsockopt(conn->params.local->socket, SOL_IP,
- IP_MTU_DISCOVER,
- (char *)&opt, sizeof(opt));
- }
- break;
-
-#ifdef CONFIG_AF_RXRPC_IPV6
- case AF_INET6:
- opt = IPV6_PMTUDISC_DONT;
- ret = kernel_setsockopt(conn->params.local->socket,
- SOL_IPV6, IPV6_MTU_DISCOVER,
- (char *)&opt, sizeof(opt));
- if (ret == 0) {
- ret = kernel_sendmsg(conn->params.local->socket, &msg,
- iov, 2, len);
- conn->params.peer->last_tx_at = ktime_get_seconds();
+ kernel_setsockopt(conn->params.local->socket,
+ SOL_IP, IP_MTU_DISCOVER,
+ (char *)&opt, sizeof(opt));
+ ret = kernel_sendmsg(conn->params.local->socket, &msg,
+ iov, 2, len);
+ conn->params.peer->last_tx_at = ktime_get_seconds();
- opt = IPV6_PMTUDISC_DO;
- kernel_setsockopt(conn->params.local->socket,
- SOL_IPV6, IPV6_MTU_DISCOVER,
- (char *)&opt, sizeof(opt));
- }
+ opt = IP_PMTUDISC_DO;
+ kernel_setsockopt(conn->params.local->socket,
+ SOL_IP, IP_MTU_DISCOVER,
+ (char *)&opt, sizeof(opt));
break;
-#endif
default:
BUG();
From: Cristian Birsan <[email protected]>
commit 12b94da411f9c6d950beb067d913024fd5617a61 upstream.
A DMA transfer can be in progress while vbus is lost due to a cable
disconnect. For endpoints that use DMA, this condition can lead to
peripheral hang. The patch ensures that endpoints are disabled before
the clocks are stopped to prevent this issue.
Fixes: a64ef71ddc13 ("usb: gadget: atmel_usba_udc: condition clocks to vbus state")
Signed-off-by: Cristian Birsan <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/udc/atmel_usba_udc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1950,10 +1950,10 @@ static irqreturn_t usba_vbus_irq_thread(
usba_start(udc);
} else {
udc->suspended = false;
- usba_stop(udc);
-
if (udc->driver->disconnect)
udc->driver->disconnect(&udc->gadget);
+
+ usba_stop(udc);
}
udc->vbus_prev = vbus;
}
From: Takashi Iwai <[email protected]>
[ Upstream commit 9479e75fca370a5220784f7596bf598c4dad0b9b ]
Currently, when the HD-audio controller driver doesn't detect any
codecs, it tries to abort the probe. But this abort happens at the
delayed probe, i.e. the primary probe call already returned success,
hence the driver is never unbound until user does so explicitly.
As a result, it may leave the HD-audio device in the running state
without the runtime PM. More badly, if the device is a HD-audio bus
that is tied with a GPU, GPU cannot reach to the full power down and
consumes unnecessarily much power.
This patch changes the logic after no-codec situation; it continues
probing without the further codec initialization but keep the
controller driver running normally.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Tested-by: Roy Spliet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/hda_intel.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index f82f95df757cf..fbffec2ab2372 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1958,7 +1958,7 @@ static int azx_first_init(struct azx *chip)
/* codec detection */
if (!azx_bus(chip)->codec_mask) {
dev_err(card->dev, "no codecs found!\n");
- return -ENODEV;
+ /* keep running the rest for the runtime PM */
}
if (azx_acquire_irq(chip, 0) < 0)
@@ -2268,9 +2268,11 @@ static int azx_probe_continue(struct azx *chip)
#endif
/* create codec instances */
- err = azx_probe_codecs(chip, azx_max_codecs[chip->driver_type]);
- if (err < 0)
- goto out_free;
+ if (bus->codec_mask) {
+ err = azx_probe_codecs(chip, azx_max_codecs[chip->driver_type]);
+ if (err < 0)
+ goto out_free;
+ }
#ifdef CONFIG_SND_HDA_PATCH_LOADER
if (chip->fw) {
@@ -2284,7 +2286,7 @@ static int azx_probe_continue(struct azx *chip)
#endif
}
#endif
- if ((probe_only[dev] & 1) == 0) {
+ if (bus->codec_mask && !(probe_only[dev] & 1)) {
err = azx_codec_configure(chip);
if (err < 0)
goto out_free;
--
2.20.1
From: Vasily Averin <[email protected]>
commit e1e8399eee72e9d5246d4d1bcacd793debe34dd3 upstream.
New struct nfsd4_blocked_lock allocated in find_or_allocate_block()
does not initialized nbl_list and nbl_lru.
If conflock allocation fails rollback can call list_del_init()
access uninitialized fields and corrupt memory.
v2: just initialize nbl_list and nbl_lru right after nbl allocation.
Fixes: 76d348fadff5 ("nfsd: have nfsd4_lock use blocking locks for v4.1+ lock")
Signed-off-by: Vasily Averin <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfsd/nfs4state.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -266,6 +266,8 @@ find_or_allocate_block(struct nfs4_locko
if (!nbl) {
nbl= kmalloc(sizeof(*nbl), GFP_KERNEL);
if (nbl) {
+ INIT_LIST_HEAD(&nbl->nbl_list);
+ INIT_LIST_HEAD(&nbl->nbl_lru);
fh_copy_shallow(&nbl->nbl_fh, fh);
locks_init_lock(&nbl->nbl_lock);
nfsd4_init_cb(&nbl->nbl_cb, lo->lo_owner.so_client,
From: Clement Leger <[email protected]>
commit 00a0eec59ddbb1ce966b19097d8a8d2f777e726a upstream.
Index of rvring is computed using pointer arithmetic. However, since
rvring->rvdev->vring is the base of the vring array, computation
of rvring idx should be reversed. It previously lead to writing at negative
indices in the resource table.
Signed-off-by: Clement Leger <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
Cc: Doug Anderson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/remoteproc/remoteproc_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -400,7 +400,7 @@ rproc_parse_vring(struct rproc_vdev *rvd
void rproc_free_vring(struct rproc_vring *rvring)
{
struct rproc *rproc = rvring->rvdev->rproc;
- int idx = rvring->rvdev->vring - rvring;
+ int idx = rvring - rvring->rvdev->vring;
struct fw_rsc_vdev *rsc;
idr_remove(&rproc->notifyids, rvring->notifyid);
From: Olivier Moysan <[email protected]>
commit e2bcb65782f91390952e849e21b82ed7cb05697f upstream.
pcm config must be set before snd_dmaengine_pcm_register() call.
Fixes: 0d6defc7e0e4 ("ASoC: stm32: sai: manage rebind issue")
Signed-off-by: Olivier Moysan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Cc: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/stm/stm32_sai_sub.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
--- a/sound/soc/stm/stm32_sai_sub.c
+++ b/sound/soc/stm/stm32_sai_sub.c
@@ -1543,6 +1543,9 @@ static int stm32_sai_sub_probe(struct pl
return ret;
}
+ if (STM_SAI_PROTOCOL_IS_SPDIF(sai))
+ conf = &stm32_sai_pcm_config_spdif;
+
ret = snd_dmaengine_pcm_register(&pdev->dev, conf, 0);
if (ret) {
dev_err(&pdev->dev, "Could not register pcm dma\n");
@@ -1551,15 +1554,10 @@ static int stm32_sai_sub_probe(struct pl
ret = snd_soc_register_component(&pdev->dev, &stm32_component,
&sai->cpu_dai_drv, 1);
- if (ret) {
+ if (ret)
snd_dmaengine_pcm_unregister(&pdev->dev);
- return ret;
- }
-
- if (STM_SAI_PROTOCOL_IS_SPDIF(sai))
- conf = &stm32_sai_pcm_config_spdif;
- return 0;
+ return ret;
}
static int stm32_sai_sub_remove(struct platform_device *pdev)
From: Jeremy Cline <[email protected]>
[ Upstream commit 4734b0fefbbf98f8c119eb8344efa19dac82cd2c ]
Builds of Fedora's kernel-tools package started to fail with "may be
used uninitialized" warnings for nl_pid in bpf_set_link_xdp_fd() and
bpf_get_link_xdp_info() on the s390 architecture.
Although libbpf_netlink_open() always returns a negative number when it
does not set *nl_pid, the compiler does not determine this and thus
believes the variable might be used uninitialized. Assuage gcc's fears
by explicitly initializing nl_pid.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1807781
Signed-off-by: Jeremy Cline <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/netlink.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/lib/bpf/netlink.c b/tools/lib/bpf/netlink.c
index ce3ec81b71c01..88416be2bf994 100644
--- a/tools/lib/bpf/netlink.c
+++ b/tools/lib/bpf/netlink.c
@@ -137,7 +137,7 @@ int bpf_set_link_xdp_fd(int ifindex, int fd, __u32 flags)
struct ifinfomsg ifinfo;
char attrbuf[64];
} req;
- __u32 nl_pid;
+ __u32 nl_pid = 0;
sock = libbpf_netlink_open(&nl_pid);
if (sock < 0)
@@ -254,7 +254,7 @@ int bpf_get_link_xdp_id(int ifindex, __u32 *prog_id, __u32 flags)
{
struct xdp_id_md xdp_id = {};
int sock, ret;
- __u32 nl_pid;
+ __u32 nl_pid = 0;
__u32 mask;
if (flags & ~XDP_FLAGS_MASK)
--
2.20.1
From: Niklas Schnelle <[email protected]>
commit 86dbf32da150339ca81509fa2eb84c814b55258b upstream.
with the introduction of CPU directed interrupts the kernel
parameter pci=force_floating was introduced to fall back
to the previous behavior using floating irqs.
However we were still setting the affinity in that case,
both in __irq_alloc_descs() and via the irq_set_affinity
callback in struct irq_chip.
For the former only set the affinity in the directed case.
The latter is explicitly set in zpci_directed_irq_init()
so we can just leave it unset for the floating case.
Fixes: e979ce7bced2 ("s390/pci: provide support for CPU directed interrupts")
Co-developed-by: Alexander Schmidt <[email protected]>
Signed-off-by: Alexander Schmidt <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/pci/pci_irq.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/arch/s390/pci/pci_irq.c
+++ b/arch/s390/pci/pci_irq.c
@@ -115,7 +115,6 @@ static struct irq_chip zpci_irq_chip = {
.name = "PCI-MSI",
.irq_unmask = pci_msi_unmask_irq,
.irq_mask = pci_msi_mask_irq,
- .irq_set_affinity = zpci_set_irq_affinity,
};
static void zpci_handle_cpu_local_irq(bool rescan)
@@ -276,7 +275,9 @@ int arch_setup_msi_irqs(struct pci_dev *
rc = -EIO;
if (hwirq - bit >= msi_vecs)
break;
- irq = __irq_alloc_descs(-1, 0, 1, 0, THIS_MODULE, msi->affinity);
+ irq = __irq_alloc_descs(-1, 0, 1, 0, THIS_MODULE,
+ (irq_delivery == DIRECTED) ?
+ msi->affinity : NULL);
if (irq < 0)
return -ENOMEM;
rc = irq_set_msi_desc(irq, msi);
From: Raymond Pang <[email protected]>
commit 299bd044a6f332b4a6c8f708575c27cad70a35c1 upstream.
Many Zhaoxin Root Ports and Switch Downstream Ports do provide ACS-like
capability but have no ACS Capability Structure. Peer-to-Peer transactions
could be blocked between these ports, so add quirk so devices behind them
could be assigned to different IOMMU group.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Raymond Pang <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/quirks.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4371,6 +4371,29 @@ static int pci_acs_ctrl_enabled(u16 acs_
}
/*
+ * Many Zhaoxin Root Ports and Switch Downstream Ports have no ACS capability.
+ * But the implementation could block peer-to-peer transactions between them
+ * and provide ACS-like functionality.
+ */
+static int pci_quirk_zhaoxin_pcie_ports_acs(struct pci_dev *dev, u16 acs_flags)
+{
+ if (!pci_is_pcie(dev) ||
+ ((pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) &&
+ (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM)))
+ return -ENOTTY;
+
+ switch (dev->device) {
+ case 0x0710 ... 0x071e:
+ case 0x0721:
+ case 0x0723 ... 0x0732:
+ return pci_acs_ctrl_enabled(acs_flags,
+ PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
+ }
+
+ return false;
+}
+
+/*
* AMD has indicated that the devices below do not support peer-to-peer
* in any system where they are found in the southbridge with an AMD
* IOMMU in the system. Multifunction devices that do not support
@@ -4772,6 +4795,8 @@ static const struct pci_dev_acs_enabled
{ PCI_VENDOR_ID_ZHAOXIN, 0x3038, pci_quirk_mf_endpoint_acs },
{ PCI_VENDOR_ID_ZHAOXIN, 0x3104, pci_quirk_mf_endpoint_acs },
{ PCI_VENDOR_ID_ZHAOXIN, 0x9083, pci_quirk_mf_endpoint_acs },
+ /* Zhaoxin Root/Downstream Ports */
+ { PCI_VENDOR_ID_ZHAOXIN, PCI_ANY_ID, pci_quirk_zhaoxin_pcie_ports_acs },
{ 0 }
};
From: Wolfram Sang <[email protected]>
commit edb2c9dd3948738ef030c32b948543e84f4d3f81 upstream.
device_property_read_u32() returns errno or 0, so we should use the
integer variable 'ret' and not the u32 'val' to hold the retval.
Fixes: 0560ad576268 ("i2c: altera: Add Altera I2C Controller driver")
Signed-off-by: Wolfram Sang <[email protected]>
Reviewed-by: Thor Thayer <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/i2c/busses/i2c-altera.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
--- a/drivers/i2c/busses/i2c-altera.c
+++ b/drivers/i2c/busses/i2c-altera.c
@@ -384,7 +384,6 @@ static int altr_i2c_probe(struct platfor
struct altr_i2c_dev *idev = NULL;
struct resource *res;
int irq, ret;
- u32 val;
idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
if (!idev)
@@ -411,17 +410,17 @@ static int altr_i2c_probe(struct platfor
init_completion(&idev->msg_complete);
spin_lock_init(&idev->lock);
- val = device_property_read_u32(idev->dev, "fifo-size",
+ ret = device_property_read_u32(idev->dev, "fifo-size",
&idev->fifo_size);
- if (val) {
+ if (ret) {
dev_err(&pdev->dev, "FIFO size set to default of %d\n",
ALTR_I2C_DFLT_FIFO_SZ);
idev->fifo_size = ALTR_I2C_DFLT_FIFO_SZ;
}
- val = device_property_read_u32(idev->dev, "clock-frequency",
+ ret = device_property_read_u32(idev->dev, "clock-frequency",
&idev->bus_clk_rate);
- if (val) {
+ if (ret) {
dev_err(&pdev->dev, "Default to 100kHz\n");
idev->bus_clk_rate = 100000; /* default clock rate */
}
From: Thinh Nguyen <[email protected]>
commit d0550cd20e52558ecf6847a0f96ebd5d944c17e4 upstream.
The controller always supports link recovery for device in SS and SSP.
Remove the speed limit check. Also, when the device is in RESUME or
RESET state, it means the controller received the resume/reset request.
The driver must send the link recovery to acknowledge the request. They
are valid states for the driver to send link recovery.
Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Fixes: ee5cd41c9117 ("usb: dwc3: Update speed checks for SuperSpeedPlus")
Signed-off-by: Thinh Nguyen <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/gadget.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1725,7 +1725,6 @@ static int __dwc3_gadget_wakeup(struct d
u32 reg;
u8 link_state;
- u8 speed;
/*
* According to the Databook Remote wakeup request should
@@ -1735,16 +1734,13 @@ static int __dwc3_gadget_wakeup(struct d
*/
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
- speed = reg & DWC3_DSTS_CONNECTSPD;
- if ((speed == DWC3_DSTS_SUPERSPEED) ||
- (speed == DWC3_DSTS_SUPERSPEED_PLUS))
- return 0;
-
link_state = DWC3_DSTS_USBLNKST(reg);
switch (link_state) {
+ case DWC3_LINK_STATE_RESET:
case DWC3_LINK_STATE_RX_DET: /* in HS, means Early Suspend */
case DWC3_LINK_STATE_U3: /* in HS, means SUSPEND */
+ case DWC3_LINK_STATE_RESUME:
break;
default:
return -EINVAL;
From: Masahiro Yamada <[email protected]>
commit 3d4b2238684ac919394eba7fb51bb7eeeec6ab57 upstream.
Since commit 7a0496056064 ("kbuild: fix DT binding schema rule to detect
command line changes"), this rule is every time re-run even if you change
nothing.
cmd_dtc takes one additional parameter to pass to the -O option of dtc.
We need to pass 'yaml' to if_changed_rule. Otherwise, cmd-check invoked
from if_changed_rule is false positive.
Fixes: 7a0496056064 ("kbuild: fix DT binding schema rule to detect command line changes")
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
scripts/Makefile.lib | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -297,7 +297,7 @@ define rule_dtc
endef
$(obj)/%.dt.yaml: $(src)/%.dts $(DTC) $(DT_TMP_SCHEMA) FORCE
- $(call if_changed_rule,dtc)
+ $(call if_changed_rule,dtc,yaml)
dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
From: Sergey Senozhatsky <[email protected]>
commit ab6f762f0f53162d41497708b33c9a3236d3609e upstream.
printk_deferred(), similarly to printk_safe/printk_nmi, does not
immediately attempt to print a new message on the consoles, avoiding
calls into non-reentrant kernel paths, e.g. scheduler or timekeeping,
which potentially can deadlock the system.
Those printk() flavors, instead, rely on per-CPU flush irq_work to print
messages from safer contexts. For same reasons (recursive scheduler or
timekeeping calls) printk() uses per-CPU irq_work in order to wake up
user space syslog/kmsg readers.
However, only printk_safe/printk_nmi do make sure that per-CPU areas
have been initialised and that it's safe to modify per-CPU irq_work.
This means that, for instance, should printk_deferred() be invoked "too
early", that is before per-CPU areas are initialised, printk_deferred()
will perform illegal per-CPU access.
Lech Perczak [0] reports that after commit 1b710b1b10ef ("char/random:
silence a lockdep splat with printk()") user-space syslog/kmsg readers
are not able to read new kernel messages.
The reason is printk_deferred() being called too early (as was pointed
out by Petr and John).
Fix printk_deferred() and do not queue per-CPU irq_work before per-CPU
areas are initialized.
Link: https://lore.kernel.org/lkml/[email protected]/
Reported-by: Lech Perczak <[email protected]>
Signed-off-by: Sergey Senozhatsky <[email protected]>
Tested-by: Jann Horn <[email protected]>
Reviewed-by: Petr Mladek <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Theodore Ts'o <[email protected]>
Cc: John Ogness <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Cc: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/printk.h | 5 -----
init/main.c | 1 -
kernel/printk/internal.h | 5 +++++
kernel/printk/printk.c | 34 ++++++++++++++++++++++++++++++++++
kernel/printk/printk_safe.c | 11 +----------
5 files changed, 40 insertions(+), 16 deletions(-)
--- a/include/linux/printk.h
+++ b/include/linux/printk.h
@@ -202,7 +202,6 @@ __printf(1, 2) void dump_stack_set_arch_
void dump_stack_print_info(const char *log_lvl);
void show_regs_print_info(const char *log_lvl);
extern asmlinkage void dump_stack(void) __cold;
-extern void printk_safe_init(void);
extern void printk_safe_flush(void);
extern void printk_safe_flush_on_panic(void);
#else
@@ -269,10 +268,6 @@ static inline void dump_stack(void)
{
}
-static inline void printk_safe_init(void)
-{
-}
-
static inline void printk_safe_flush(void)
{
}
--- a/init/main.c
+++ b/init/main.c
@@ -694,7 +694,6 @@ asmlinkage __visible void __init start_k
boot_init_stack_canary();
time_init();
- printk_safe_init();
perf_event_init();
profile_init();
call_function_init();
--- a/kernel/printk/internal.h
+++ b/kernel/printk/internal.h
@@ -23,6 +23,9 @@ __printf(1, 0) int vprintk_func(const ch
void __printk_safe_enter(void);
void __printk_safe_exit(void);
+void printk_safe_init(void);
+bool printk_percpu_data_ready(void);
+
#define printk_safe_enter_irqsave(flags) \
do { \
local_irq_save(flags); \
@@ -64,4 +67,6 @@ __printf(1, 0) int vprintk_func(const ch
#define printk_safe_enter_irq() local_irq_disable()
#define printk_safe_exit_irq() local_irq_enable()
+static inline void printk_safe_init(void) { }
+static inline bool printk_percpu_data_ready(void) { return false; }
#endif /* CONFIG_PRINTK */
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -460,6 +460,18 @@ static char __log_buf[__LOG_BUF_LEN] __a
static char *log_buf = __log_buf;
static u32 log_buf_len = __LOG_BUF_LEN;
+/*
+ * We cannot access per-CPU data (e.g. per-CPU flush irq_work) before
+ * per_cpu_areas are initialised. This variable is set to true when
+ * it's safe to access per-CPU data.
+ */
+static bool __printk_percpu_data_ready __read_mostly;
+
+bool printk_percpu_data_ready(void)
+{
+ return __printk_percpu_data_ready;
+}
+
/* Return log buffer address */
char *log_buf_addr_get(void)
{
@@ -1146,12 +1158,28 @@ static void __init log_buf_add_cpu(void)
static inline void log_buf_add_cpu(void) {}
#endif /* CONFIG_SMP */
+static void __init set_percpu_data_ready(void)
+{
+ printk_safe_init();
+ /* Make sure we set this flag only after printk_safe() init is done */
+ barrier();
+ __printk_percpu_data_ready = true;
+}
+
void __init setup_log_buf(int early)
{
unsigned long flags;
char *new_log_buf;
unsigned int free;
+ /*
+ * Some archs call setup_log_buf() multiple times - first is very
+ * early, e.g. from setup_arch(), and second - when percpu_areas
+ * are initialised.
+ */
+ if (!early)
+ set_percpu_data_ready();
+
if (log_buf != __log_buf)
return;
@@ -2966,6 +2994,9 @@ static DEFINE_PER_CPU(struct irq_work, w
void wake_up_klogd(void)
{
+ if (!printk_percpu_data_ready())
+ return;
+
preempt_disable();
if (waitqueue_active(&log_wait)) {
this_cpu_or(printk_pending, PRINTK_PENDING_WAKEUP);
@@ -2976,6 +3007,9 @@ void wake_up_klogd(void)
void defer_console_output(void)
{
+ if (!printk_percpu_data_ready())
+ return;
+
preempt_disable();
__this_cpu_or(printk_pending, PRINTK_PENDING_OUTPUT);
irq_work_queue(this_cpu_ptr(&wake_up_klogd_work));
--- a/kernel/printk/printk_safe.c
+++ b/kernel/printk/printk_safe.c
@@ -27,7 +27,6 @@
* There are situations when we want to make sure that all buffers
* were handled or when IRQs are blocked.
*/
-static int printk_safe_irq_ready __read_mostly;
#define SAFE_LOG_BUF_LEN ((1 << CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT) - \
sizeof(atomic_t) - \
@@ -51,7 +50,7 @@ static DEFINE_PER_CPU(struct printk_safe
/* Get flushed in a more safe context. */
static void queue_flush_work(struct printk_safe_seq_buf *s)
{
- if (printk_safe_irq_ready)
+ if (printk_percpu_data_ready())
irq_work_queue(&s->work);
}
@@ -402,14 +401,6 @@ void __init printk_safe_init(void)
#endif
}
- /*
- * In the highly unlikely event that a NMI were to trigger at
- * this moment. Make sure IRQ work is set up before this
- * variable is set.
- */
- barrier();
- printk_safe_irq_ready = 1;
-
/* Flush pending messages that did not have scheduled IRQ works. */
printk_safe_flush();
}
On 01/05/2020 14:22, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.37 release.
> There are 83 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 03 May 2020 13:12:02 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.37-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests are passing for Tegra ...
Test results for stable-v5.4:
13 builds: 13 pass, 0 fail
24 boots: 24 pass, 0 fail
40 tests: 40 pass, 0 fail
Linux version: 5.4.37-rc1-gbecd7d89321d
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra20-ventana,
tegra210-p2371-2180, tegra210-p3450-0000,
tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
On Fri, 1 May 2020 at 19:08, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.4.37 release.
> There are 83 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 03 May 2020 13:12:02 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.37-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 5.4.37-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.4.y
git commit: becd7d89321d9b96617ee5a99498213c703be541
git describe: v5.4.36-84-gbecd7d89321d
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.4-oe/build/v5.4.36-84-gbecd7d89321d
No regressions (compared to build v5.4.36)
No fixes (compared to build v5.4.36)
Ran 28653 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- juno-r2-compat
- juno-r2-kasan
- nxp-ls2088
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86
- x86-kasan
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* install-android-platform-tools-r2800
* libgpiod
* linux-log-parser
* ltp-commands-tests
* ltp-containers-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-math-tests
* perf
* kselftest
* kselftest/drivers
* kselftest/filesystems
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* network-basic-tests
* v4l2-compliance
* kselftest/net
* kselftest/networking
* ltp-fs-tests
* ltp-open-posix-tests
* ltp-syscalls-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-native/drivers
* kselftest-vsyscall-mode-native/filesystems
* kselftest-vsyscall-mode-native/net
* kselftest-vsyscall-mode-native/networking
* kselftest-vsyscall-mode-none
* kselftest-vsyscall-mode-none/drivers
* kselftest-vsyscall-mode-none/filesystems
* kselftest-vsyscall-mode-none/net
* kselftest-vsyscall-mode-none/networking
--
Linaro LKFT
https://lkft.linaro.org
On Fri, May 01, 2020 at 03:22:39PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.37 release.
> There are 83 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 03 May 2020 13:12:02 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 157 pass: 157 fail: 0
Qemu test results:
total: 427 pass: 427 fail: 0
Guenter
On Sat, May 02, 2020 at 03:19:40AM +0530, Naresh Kamboju wrote:
> On Fri, 1 May 2020 at 19:08, Greg Kroah-Hartman
> <[email protected]> wrote:
> >
> > This is the start of the stable review cycle for the 5.4.37 release.
> > There are 83 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sun, 03 May 2020 13:12:02 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.37-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
>
> Results from Linaro’s test farm.
> No regressions on arm64, arm, x86_64, and i386.
Thanks for testing all of these and letting me know.
greg k-h
On 5/1/20 7:22 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.37 release.
> There are 83 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 03 May 2020 13:12:02 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.37-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah