The FMC2 functional block makes the interface with: synchronous and
asynchronous static devices (such as PSNOR, PSRAM or other memory-mapped
peripherals) and NAND flash memories.
Its main purposes are:
- to translate AXI transactions into the appropriate external device
protocol
- to meet the access time requirements of the external devices
All external devices share the addresses, data and control signals with the
controller. Each external device is accessed by means of a unique Chip
Select. The FMC2 performs only one access at a time to an external device.
Changes in v4:
- bindings:
- fix filename: st,stm32-fmc2-ebi.yaml
Changes in v3:
- NAND:
- rename labels used on errors
- add in the commit log the reason to increase FMC2_TIMEOUT_MS (patch 3)
- add Miquel reviewed-by tag (patches 2/4/5/9)
- EBI:
- move in memory folder
- merge MFD and BUS drivers to avoid a MFD driver
- bindings:
- pattern name has been modified
- vendor properties have been modified
- s/_/-/
- add unit suffix (-ns) on timing properties
Christophe Kerello (10):
mtd: rawnand: stm32_fmc2: manage all errors cases at probe time
mtd: rawnand: stm32_fmc2: remove useless inline comments
mtd: rawnand: stm32_fmc2: use FMC2_TIMEOUT_MS for timeouts
mtd: rawnand: stm32_fmc2: cleanup
mtd: rawnand: stm32_fmc2: use FIELD_PREP/FIELD_GET macros
dt-bindings: mtd: update STM32 FMC2 NAND controller documentation
dt-bindings: memory-controller: add STM32 FMC2 EBI controller
documentation
memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver
mtd: rawnand: stm32_fmc2: use regmap APIs
mtd: rawnand: stm32_fmc2: get resources from parent node
.../memory-controllers/st,stm32-fmc2-ebi.yaml | 261 +++++
.../bindings/mtd/st,stm32-fmc2-nand.yaml | 19 +-
drivers/memory/Kconfig | 10 +
drivers/memory/Makefile | 1 +
drivers/memory/stm32-fmc2-ebi.c | 1206 ++++++++++++++++++++
drivers/mtd/nand/raw/Kconfig | 1 +
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 1176 ++++++++++---------
7 files changed, 2061 insertions(+), 613 deletions(-)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
create mode 100644 drivers/memory/stm32-fmc2-ebi.c
--
1.9.1
Remove inline comments that are useless since function label are
self explanatory.
Signed-off-by: Christophe Kerello <[email protected]>
Reviewed-by: Miquel Raynal <[email protected]>
---
Changes in v3:
- add Miquel reviewed-by tag
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 40 ----------------------------------
1 file changed, 40 deletions(-)
diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 50a6377..3377fbe 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -281,7 +281,6 @@ static inline struct stm32_fmc2_nfc *to_stm32_nfc(struct nand_controller *base)
return container_of(base, struct stm32_fmc2_nfc, base);
}
-/* Timings configuration */
static void stm32_fmc2_timings_init(struct nand_chip *chip)
{
struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
@@ -313,7 +312,6 @@ static void stm32_fmc2_timings_init(struct nand_chip *chip)
writel_relaxed(patt, fmc2->io_base + FMC2_PATT);
}
-/* Controller configuration */
static void stm32_fmc2_setup(struct nand_chip *chip)
{
struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
@@ -341,7 +339,6 @@ static void stm32_fmc2_setup(struct nand_chip *chip)
writel_relaxed(pcr, fmc2->io_base + FMC2_PCR);
}
-/* Select target */
static int stm32_fmc2_select_chip(struct nand_chip *chip, int chipnr)
{
struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
@@ -353,11 +350,7 @@ static int stm32_fmc2_select_chip(struct nand_chip *chip, int chipnr)
return 0;
fmc2->cs_sel = nand->cs_used[chipnr];
-
- /* FMC2 setup routine */
stm32_fmc2_setup(chip);
-
- /* Apply timings */
stm32_fmc2_timings_init(chip);
if (fmc2->dma_tx_ch && fmc2->dma_rx_ch) {
@@ -407,7 +400,6 @@ static int stm32_fmc2_select_chip(struct nand_chip *chip, int chipnr)
return 0;
}
-/* Set bus width to 16-bit or 8-bit */
static void stm32_fmc2_set_buswidth_16(struct stm32_fmc2_nfc *fmc2, bool set)
{
u32 pcr = readl_relaxed(fmc2->io_base + FMC2_PCR);
@@ -418,7 +410,6 @@ static void stm32_fmc2_set_buswidth_16(struct stm32_fmc2_nfc *fmc2, bool set)
writel_relaxed(pcr, fmc2->io_base + FMC2_PCR);
}
-/* Enable/disable ECC */
static void stm32_fmc2_set_ecc(struct stm32_fmc2_nfc *fmc2, bool enable)
{
u32 pcr = readl(fmc2->io_base + FMC2_PCR);
@@ -429,7 +420,6 @@ static void stm32_fmc2_set_ecc(struct stm32_fmc2_nfc *fmc2, bool enable)
writel(pcr, fmc2->io_base + FMC2_PCR);
}
-/* Enable irq sources in case of the sequencer is used */
static inline void stm32_fmc2_enable_seq_irq(struct stm32_fmc2_nfc *fmc2)
{
u32 csqier = readl_relaxed(fmc2->io_base + FMC2_CSQIER);
@@ -441,7 +431,6 @@ static inline void stm32_fmc2_enable_seq_irq(struct stm32_fmc2_nfc *fmc2)
writel_relaxed(csqier, fmc2->io_base + FMC2_CSQIER);
}
-/* Disable irq sources in case of the sequencer is used */
static inline void stm32_fmc2_disable_seq_irq(struct stm32_fmc2_nfc *fmc2)
{
u32 csqier = readl_relaxed(fmc2->io_base + FMC2_CSQIER);
@@ -453,13 +442,11 @@ static inline void stm32_fmc2_disable_seq_irq(struct stm32_fmc2_nfc *fmc2)
fmc2->irq_state = FMC2_IRQ_UNKNOWN;
}
-/* Clear irq sources in case of the sequencer is used */
static inline void stm32_fmc2_clear_seq_irq(struct stm32_fmc2_nfc *fmc2)
{
writel_relaxed(FMC2_CSQICR_CLEAR_IRQ, fmc2->io_base + FMC2_CSQICR);
}
-/* Enable irq sources in case of bch is used */
static inline void stm32_fmc2_enable_bch_irq(struct stm32_fmc2_nfc *fmc2,
int mode)
{
@@ -475,7 +462,6 @@ static inline void stm32_fmc2_enable_bch_irq(struct stm32_fmc2_nfc *fmc2,
writel_relaxed(bchier, fmc2->io_base + FMC2_BCHIER);
}
-/* Disable irq sources in case of bch is used */
static inline void stm32_fmc2_disable_bch_irq(struct stm32_fmc2_nfc *fmc2)
{
u32 bchier = readl_relaxed(fmc2->io_base + FMC2_BCHIER);
@@ -488,7 +474,6 @@ static inline void stm32_fmc2_disable_bch_irq(struct stm32_fmc2_nfc *fmc2)
fmc2->irq_state = FMC2_IRQ_UNKNOWN;
}
-/* Clear irq sources in case of bch is used */
static inline void stm32_fmc2_clear_bch_irq(struct stm32_fmc2_nfc *fmc2)
{
writel_relaxed(FMC2_BCHICR_CLEAR_IRQ, fmc2->io_base + FMC2_BCHICR);
@@ -549,10 +534,7 @@ static int stm32_fmc2_ham_calculate(struct nand_chip *chip, const u8 *data,
}
heccr = readl_relaxed(fmc2->io_base + FMC2_HECCR);
-
stm32_fmc2_ham_set_ecc(heccr, ecc);
-
- /* Disable ECC */
stm32_fmc2_set_ecc(fmc2, false);
return 0;
@@ -654,13 +636,11 @@ static int stm32_fmc2_bch_calculate(struct nand_chip *chip, const u8 *data,
ecc[12] = bchpbr;
}
- /* Disable ECC */
stm32_fmc2_set_ecc(fmc2, false);
return 0;
}
-/* BCH algorithm correction */
static int stm32_fmc2_bch_decode(int eccsize, u8 *dat, u32 *ecc_sta)
{
u32 bchdsr0 = ecc_sta[0];
@@ -720,7 +700,6 @@ static int stm32_fmc2_bch_correct(struct nand_chip *chip, u8 *dat,
ecc_sta[3] = readl_relaxed(fmc2->io_base + FMC2_BCHDSR3);
ecc_sta[4] = readl_relaxed(fmc2->io_base + FMC2_BCHDSR4);
- /* Disable ECC */
stm32_fmc2_set_ecc(fmc2, false);
return stm32_fmc2_bch_decode(chip->ecc.size, dat, ecc_sta);
@@ -1054,7 +1033,6 @@ static int stm32_fmc2_sequencer_write_page(struct nand_chip *chip,
{
int ret;
- /* Select the target */
ret = stm32_fmc2_select_chip(chip, chip->cur_cs);
if (ret)
return ret;
@@ -1069,7 +1047,6 @@ static int stm32_fmc2_sequencer_write_page_raw(struct nand_chip *chip,
{
int ret;
- /* Select the target */
ret = stm32_fmc2_select_chip(chip, chip->cur_cs);
if (ret)
return ret;
@@ -1153,7 +1130,6 @@ static int stm32_fmc2_sequencer_read_page(struct nand_chip *chip, u8 *buf,
u16 sta_map;
int ret;
- /* Select the target */
ret = stm32_fmc2_select_chip(chip, chip->cur_cs);
if (ret)
return ret;
@@ -1199,7 +1175,6 @@ static int stm32_fmc2_sequencer_read_page_raw(struct nand_chip *chip, u8 *buf,
struct mtd_info *mtd = nand_to_mtd(chip);
int ret;
- /* Select the target */
ret = stm32_fmc2_select_chip(chip, chip->cur_cs);
if (ret)
return ret;
@@ -1409,7 +1384,6 @@ static int stm32_fmc2_exec_op(struct nand_chip *chip,
return ret;
}
-/* Controller initialization */
static void stm32_fmc2_init(struct stm32_fmc2_nfc *fmc2)
{
u32 pcr = readl_relaxed(fmc2->io_base + FMC2_PCR);
@@ -1452,7 +1426,6 @@ static void stm32_fmc2_init(struct stm32_fmc2_nfc *fmc2)
writel_relaxed(FMC2_PATT_DEFAULT, fmc2->io_base + FMC2_PATT);
}
-/* Controller timings */
static void stm32_fmc2_calc_timings(struct nand_chip *chip,
const struct nand_sdr_timings *sdrt)
{
@@ -1596,14 +1569,11 @@ static int stm32_fmc2_setup_interface(struct nand_chip *chip, int chipnr,
return 0;
stm32_fmc2_calc_timings(chip, sdrt);
-
- /* Apply timings */
stm32_fmc2_timings_init(chip);
return 0;
}
-/* DMA configuration */
static int stm32_fmc2_dma_setup(struct stm32_fmc2_nfc *fmc2)
{
int ret = 0;
@@ -1667,7 +1637,6 @@ static int stm32_fmc2_dma_setup(struct stm32_fmc2_nfc *fmc2)
return ret;
}
-/* NAND callbacks setup */
static void stm32_fmc2_nand_callbacks_setup(struct nand_chip *chip)
{
struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
@@ -1708,7 +1677,6 @@ static void stm32_fmc2_nand_callbacks_setup(struct nand_chip *chip)
chip->ecc.bytes = chip->options & NAND_BUSWIDTH_16 ? 8 : 7;
}
-/* FMC2 layout */
static int stm32_fmc2_nand_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
@@ -1744,7 +1712,6 @@ static int stm32_fmc2_nand_ooblayout_free(struct mtd_info *mtd, int section,
.free = stm32_fmc2_nand_ooblayout_free,
};
-/* FMC2 caps */
static int stm32_fmc2_calc_ecc_bytes(int step_size, int strength)
{
/* Hamming */
@@ -1763,7 +1730,6 @@ static int stm32_fmc2_calc_ecc_bytes(int step_size, int strength)
FMC2_ECC_STEP_SIZE,
FMC2_ECC_HAM, FMC2_ECC_BCH4, FMC2_ECC_BCH8);
-/* FMC2 controller ops */
static int stm32_fmc2_attach_chip(struct nand_chip *chip)
{
struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
@@ -1797,13 +1763,10 @@ static int stm32_fmc2_attach_chip(struct nand_chip *chip)
if (chip->bbt_options & NAND_BBT_USE_FLASH)
chip->bbt_options |= NAND_BBT_NO_OOB;
- /* NAND callbacks setup */
stm32_fmc2_nand_callbacks_setup(chip);
- /* Define ECC layout */
mtd_set_ooblayout(mtd, &stm32_fmc2_nand_ooblayout_ops);
- /* Configure bus width to 16-bit */
if (chip->options & NAND_BUSWIDTH_16)
stm32_fmc2_set_buswidth_16(fmc2, true);
@@ -1816,7 +1779,6 @@ static int stm32_fmc2_attach_chip(struct nand_chip *chip)
.setup_data_interface = stm32_fmc2_setup_interface,
};
-/* FMC2 probe */
static int stm32_fmc2_parse_child(struct stm32_fmc2_nfc *fmc2,
struct device_node *dn)
{
@@ -1976,12 +1938,10 @@ static int stm32_fmc2_probe(struct platform_device *pdev)
reset_control_deassert(rstc);
}
- /* DMA setup */
ret = stm32_fmc2_dma_setup(fmc2);
if (ret)
goto err_release_dma;
- /* FMC2 init routine */
stm32_fmc2_init(fmc2);
nand = &fmc2->nand;
--
1.9.1
This patch removes the constant FMC2_TIMEOUT_US.
FMC2_TIMEOUT_MS will be used each time that we need to wait (except
when the timeout value is set by the framework).
It was seen, during stress tests with the sequencer in an overloaded
system, that we could be close to 1 second, even if we never met this
value. To be safe, FMC2_TIMEOUT_MS is set to 5 seconds.
Signed-off-by: Christophe Kerello <[email protected]>
---
Changes in v3:
- add in the commit log the reason to increase FMC2_TIMEOUT_MS
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 3377fbe..5778a95 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -37,8 +37,7 @@
/* Max ECC buffer length */
#define FMC2_MAX_ECC_BUF_LEN (FMC2_BCHDSRS_LEN * FMC2_MAX_SG)
-#define FMC2_TIMEOUT_US 1000
-#define FMC2_TIMEOUT_MS 1000
+#define FMC2_TIMEOUT_MS 5000
/* Timings */
#define FMC2_THIZ 1
@@ -526,8 +525,8 @@ static int stm32_fmc2_ham_calculate(struct nand_chip *chip, const u8 *data,
int ret;
ret = readl_relaxed_poll_timeout(fmc2->io_base + FMC2_SR,
- sr, sr & FMC2_SR_NWRF, 10,
- FMC2_TIMEOUT_MS);
+ sr, sr & FMC2_SR_NWRF, 1,
+ 1000 * FMC2_TIMEOUT_MS);
if (ret) {
dev_err(fmc2->dev, "ham timeout\n");
return ret;
@@ -1315,7 +1314,7 @@ static int stm32_fmc2_waitrdy(struct nand_chip *chip, unsigned long timeout_ms)
/* Check if there is no pending requests to the NAND flash */
if (readl_relaxed_poll_timeout_atomic(fmc2->io_base + FMC2_SR, sr,
sr & FMC2_SR_NWRF, 1,
- FMC2_TIMEOUT_US))
+ 1000 * FMC2_TIMEOUT_MS))
dev_warn(fmc2->dev, "Waitrdy timeout\n");
/* Wait tWB before R/B# signal is low */
--
1.9.1
These bindings can be used on SOCs where the FMC2 NAND controller is
in standalone. In case that the FMC2 embeds 2 controllers (an external
bus controller and a raw NAND controller), the register base and the
clock will be defined in the parent node. It is the reason why the
register base address and the clock are now optional.
Signed-off-by: Christophe Kerello <[email protected]>
---
.../devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
index b059267..68fac1a 100644
--- a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
@@ -18,13 +18,15 @@ properties:
reg:
items:
- - description: Registers
+ - description: Registers (optional)
- description: Chip select 0 data
- description: Chip select 0 command
- description: Chip select 0 address space
- description: Chip select 1 data
- description: Chip select 1 command
- description: Chip select 1 address space
+ minItems: 6
+ maxItems: 7
interrupts:
maxItems: 1
@@ -61,7 +63,6 @@ required:
- compatible
- reg
- interrupts
- - clocks
examples:
- |
@@ -77,13 +78,13 @@ examples:
<0x81000000 0x1000>,
<0x89010000 0x1000>,
<0x89020000 0x1000>;
- interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&mdma1 20 0x10 0x12000a02 0x0 0x0>,
- <&mdma1 20 0x10 0x12000a08 0x0 0x0>,
- <&mdma1 21 0x10 0x12000a0a 0x0 0x0>;
- dma-names = "tx", "rx", "ecc";
- clocks = <&rcc FMC_K>;
- resets = <&rcc FMC_R>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
+ <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
+ <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
+ dma-names = "tx", "rx", "ecc";
+ clocks = <&rcc FMC_K>;
+ resets = <&rcc FMC_R>;
#address-cells = <1>;
#size-cells = <0>;
--
1.9.1
This patch removes custom macros and uses FIELD_PREP and FIELD_GET macros.
Signed-off-by: Christophe Kerello <[email protected]>
Reviewed-by: Miquel Raynal <[email protected]>
---
Changes in v3:
- add Miquel reviewed-by tag
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 177 ++++++++++++++++-----------------
1 file changed, 85 insertions(+), 92 deletions(-)
diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 0d108fb..236bb41 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -4,6 +4,7 @@
* Author: Christophe Kerello <[email protected]>
*/
+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
@@ -84,20 +85,16 @@
/* Register: FMC2_PCR */
#define FMC2_PCR_PWAITEN BIT(1)
#define FMC2_PCR_PBKEN BIT(2)
-#define FMC2_PCR_PWID_MASK GENMASK(5, 4)
-#define FMC2_PCR_PWID(x) (((x) & 0x3) << 4)
+#define FMC2_PCR_PWID GENMASK(5, 4)
#define FMC2_PCR_PWID_BUSWIDTH_8 0
#define FMC2_PCR_PWID_BUSWIDTH_16 1
#define FMC2_PCR_ECCEN BIT(6)
#define FMC2_PCR_ECCALG BIT(8)
-#define FMC2_PCR_TCLR_MASK GENMASK(12, 9)
-#define FMC2_PCR_TCLR(x) (((x) & 0xf) << 9)
+#define FMC2_PCR_TCLR GENMASK(12, 9)
#define FMC2_PCR_TCLR_DEFAULT 0xf
-#define FMC2_PCR_TAR_MASK GENMASK(16, 13)
-#define FMC2_PCR_TAR(x) (((x) & 0xf) << 13)
+#define FMC2_PCR_TAR GENMASK(16, 13)
#define FMC2_PCR_TAR_DEFAULT 0xf
-#define FMC2_PCR_ECCSS_MASK GENMASK(19, 17)
-#define FMC2_PCR_ECCSS(x) (((x) & 0x7) << 17)
+#define FMC2_PCR_ECCSS GENMASK(19, 17)
#define FMC2_PCR_ECCSS_512 1
#define FMC2_PCR_ECCSS_2048 3
#define FMC2_PCR_BCHECC BIT(24)
@@ -107,17 +104,17 @@
#define FMC2_SR_NWRF BIT(6)
/* Register: FMC2_PMEM */
-#define FMC2_PMEM_MEMSET(x) (((x) & 0xff) << 0)
-#define FMC2_PMEM_MEMWAIT(x) (((x) & 0xff) << 8)
-#define FMC2_PMEM_MEMHOLD(x) (((x) & 0xff) << 16)
-#define FMC2_PMEM_MEMHIZ(x) (((x) & 0xff) << 24)
+#define FMC2_PMEM_MEMSET GENMASK(7, 0)
+#define FMC2_PMEM_MEMWAIT GENMASK(15, 8)
+#define FMC2_PMEM_MEMHOLD GENMASK(23, 16)
+#define FMC2_PMEM_MEMHIZ GENMASK(31, 24)
#define FMC2_PMEM_DEFAULT 0x0a0a0a0a
/* Register: FMC2_PATT */
-#define FMC2_PATT_ATTSET(x) (((x) & 0xff) << 0)
-#define FMC2_PATT_ATTWAIT(x) (((x) & 0xff) << 8)
-#define FMC2_PATT_ATTHOLD(x) (((x) & 0xff) << 16)
-#define FMC2_PATT_ATTHIZ(x) (((x) & 0xff) << 24)
+#define FMC2_PATT_ATTSET GENMASK(7, 0)
+#define FMC2_PATT_ATTWAIT GENMASK(15, 8)
+#define FMC2_PATT_ATTHOLD GENMASK(23, 16)
+#define FMC2_PATT_ATTHIZ GENMASK(31, 24)
#define FMC2_PATT_DEFAULT 0x0a0a0a0a
/* Register: FMC2_ISR */
@@ -132,9 +129,9 @@
/* Register: FMC2_CSQCFGR1 */
#define FMC2_CSQCFGR1_CMD2EN BIT(1)
#define FMC2_CSQCFGR1_DMADEN BIT(2)
-#define FMC2_CSQCFGR1_ACYNBR(x) (((x) & 0x7) << 4)
-#define FMC2_CSQCFGR1_CMD1(x) (((x) & 0xff) << 8)
-#define FMC2_CSQCFGR1_CMD2(x) (((x) & 0xff) << 16)
+#define FMC2_CSQCFGR1_ACYNBR GENMASK(6, 4)
+#define FMC2_CSQCFGR1_CMD1 GENMASK(15, 8)
+#define FMC2_CSQCFGR1_CMD2 GENMASK(23, 16)
#define FMC2_CSQCFGR1_CMD1T BIT(24)
#define FMC2_CSQCFGR1_CMD2T BIT(25)
@@ -142,13 +139,13 @@
#define FMC2_CSQCFGR2_SQSDTEN BIT(0)
#define FMC2_CSQCFGR2_RCMD2EN BIT(1)
#define FMC2_CSQCFGR2_DMASEN BIT(2)
-#define FMC2_CSQCFGR2_RCMD1(x) (((x) & 0xff) << 8)
-#define FMC2_CSQCFGR2_RCMD2(x) (((x) & 0xff) << 16)
+#define FMC2_CSQCFGR2_RCMD1 GENMASK(15, 8)
+#define FMC2_CSQCFGR2_RCMD2 GENMASK(23, 16)
#define FMC2_CSQCFGR2_RCMD1T BIT(24)
#define FMC2_CSQCFGR2_RCMD2T BIT(25)
/* Register: FMC2_CSQCFGR3 */
-#define FMC2_CSQCFGR3_SNBR(x) (((x) & 0x1f) << 8)
+#define FMC2_CSQCFGR3_SNBR GENMASK(13, 8)
#define FMC2_CSQCFGR3_AC1T BIT(16)
#define FMC2_CSQCFGR3_AC2T BIT(17)
#define FMC2_CSQCFGR3_AC3T BIT(18)
@@ -159,15 +156,15 @@
#define FMC2_CSQCFGR3_RAC2T BIT(23)
/* Register: FMC2_CSQCAR1 */
-#define FMC2_CSQCAR1_ADDC1(x) (((x) & 0xff) << 0)
-#define FMC2_CSQCAR1_ADDC2(x) (((x) & 0xff) << 8)
-#define FMC2_CSQCAR1_ADDC3(x) (((x) & 0xff) << 16)
-#define FMC2_CSQCAR1_ADDC4(x) (((x) & 0xff) << 24)
+#define FMC2_CSQCAR1_ADDC1 GENMASK(7, 0)
+#define FMC2_CSQCAR1_ADDC2 GENMASK(15, 8)
+#define FMC2_CSQCAR1_ADDC3 GENMASK(23, 16)
+#define FMC2_CSQCAR1_ADDC4 GENMASK(31, 24)
/* Register: FMC2_CSQCAR2 */
-#define FMC2_CSQCAR2_ADDC5(x) (((x) & 0xff) << 0)
-#define FMC2_CSQCAR2_NANDCEN(x) (((x) & 0x3) << 10)
-#define FMC2_CSQCAR2_SAO(x) (((x) & 0xffff) << 16)
+#define FMC2_CSQCAR2_ADDC5 GENMASK(7, 0)
+#define FMC2_CSQCAR2_NANDCEN GENMASK(11, 10)
+#define FMC2_CSQCAR2_SAO GENMASK(31, 16)
/* Register: FMC2_CSQIER */
#define FMC2_CSQIER_TCIE BIT(0)
@@ -188,28 +185,23 @@
/* Register: FMC2_BCHDSR0 */
#define FMC2_BCHDSR0_DUE BIT(0)
#define FMC2_BCHDSR0_DEF BIT(1)
-#define FMC2_BCHDSR0_DEN_MASK GENMASK(7, 4)
-#define FMC2_BCHDSR0_DEN_SHIFT 4
+#define FMC2_BCHDSR0_DEN GENMASK(7, 4)
/* Register: FMC2_BCHDSR1 */
-#define FMC2_BCHDSR1_EBP1_MASK GENMASK(12, 0)
-#define FMC2_BCHDSR1_EBP2_MASK GENMASK(28, 16)
-#define FMC2_BCHDSR1_EBP2_SHIFT 16
+#define FMC2_BCHDSR1_EBP1 GENMASK(12, 0)
+#define FMC2_BCHDSR1_EBP2 GENMASK(28, 16)
/* Register: FMC2_BCHDSR2 */
-#define FMC2_BCHDSR2_EBP3_MASK GENMASK(12, 0)
-#define FMC2_BCHDSR2_EBP4_MASK GENMASK(28, 16)
-#define FMC2_BCHDSR2_EBP4_SHIFT 16
+#define FMC2_BCHDSR2_EBP3 GENMASK(12, 0)
+#define FMC2_BCHDSR2_EBP4 GENMASK(28, 16)
/* Register: FMC2_BCHDSR3 */
-#define FMC2_BCHDSR3_EBP5_MASK GENMASK(12, 0)
-#define FMC2_BCHDSR3_EBP6_MASK GENMASK(28, 16)
-#define FMC2_BCHDSR3_EBP6_SHIFT 16
+#define FMC2_BCHDSR3_EBP5 GENMASK(12, 0)
+#define FMC2_BCHDSR3_EBP6 GENMASK(28, 16)
/* Register: FMC2_BCHDSR4 */
-#define FMC2_BCHDSR4_EBP7_MASK GENMASK(12, 0)
-#define FMC2_BCHDSR4_EBP8_MASK GENMASK(28, 16)
-#define FMC2_BCHDSR4_EBP8_SHIFT 16
+#define FMC2_BCHDSR4_EBP7 GENMASK(12, 0)
+#define FMC2_BCHDSR4_EBP8 GENMASK(28, 16)
enum stm32_fmc2_ecc {
FMC2_ECC_HAM = 1,
@@ -289,22 +281,22 @@ static void stm32_fmc2_nfc_timings_init(struct nand_chip *chip)
u32 pmem, patt;
/* Set tclr/tar timings */
- pcr &= ~FMC2_PCR_TCLR_MASK;
- pcr |= FMC2_PCR_TCLR(timings->tclr);
- pcr &= ~FMC2_PCR_TAR_MASK;
- pcr |= FMC2_PCR_TAR(timings->tar);
+ pcr &= ~FMC2_PCR_TCLR;
+ pcr |= FIELD_PREP(FMC2_PCR_TCLR, timings->tclr);
+ pcr &= ~FMC2_PCR_TAR;
+ pcr |= FIELD_PREP(FMC2_PCR_TAR, timings->tar);
/* Set tset/twait/thold/thiz timings in common bank */
- pmem = FMC2_PMEM_MEMSET(timings->tset_mem);
- pmem |= FMC2_PMEM_MEMWAIT(timings->twait);
- pmem |= FMC2_PMEM_MEMHOLD(timings->thold_mem);
- pmem |= FMC2_PMEM_MEMHIZ(timings->thiz);
+ pmem = FIELD_PREP(FMC2_PMEM_MEMSET, timings->tset_mem);
+ pmem |= FIELD_PREP(FMC2_PMEM_MEMWAIT, timings->twait);
+ pmem |= FIELD_PREP(FMC2_PMEM_MEMHOLD, timings->thold_mem);
+ pmem |= FIELD_PREP(FMC2_PMEM_MEMHIZ, timings->thiz);
/* Set tset/twait/thold/thiz timings in attribut bank */
- patt = FMC2_PATT_ATTSET(timings->tset_att);
- patt |= FMC2_PATT_ATTWAIT(timings->twait);
- patt |= FMC2_PATT_ATTHOLD(timings->thold_att);
- patt |= FMC2_PATT_ATTHIZ(timings->thiz);
+ patt = FIELD_PREP(FMC2_PATT_ATTSET, timings->tset_att);
+ patt |= FIELD_PREP(FMC2_PATT_ATTWAIT, timings->twait);
+ patt |= FIELD_PREP(FMC2_PATT_ATTHOLD, timings->thold_att);
+ patt |= FIELD_PREP(FMC2_PATT_ATTHIZ, timings->thiz);
writel_relaxed(pcr, nfc->io_base + FMC2_PCR);
writel_relaxed(pmem, nfc->io_base + FMC2_PMEM);
@@ -327,13 +319,13 @@ static void stm32_fmc2_nfc_setup(struct nand_chip *chip)
}
/* Set buswidth */
- pcr &= ~FMC2_PCR_PWID_MASK;
+ pcr &= ~FMC2_PCR_PWID;
if (chip->options & NAND_BUSWIDTH_16)
- pcr |= FMC2_PCR_PWID(FMC2_PCR_PWID_BUSWIDTH_16);
+ pcr |= FIELD_PREP(FMC2_PCR_PWID, FMC2_PCR_PWID_BUSWIDTH_16);
/* Set ECC sector size */
- pcr &= ~FMC2_PCR_ECCSS_MASK;
- pcr |= FMC2_PCR_ECCSS(FMC2_PCR_ECCSS_512);
+ pcr &= ~FMC2_PCR_ECCSS;
+ pcr |= FIELD_PREP(FMC2_PCR_ECCSS, FMC2_PCR_ECCSS_512);
writel_relaxed(pcr, nfc->io_base + FMC2_PCR);
}
@@ -403,9 +395,9 @@ static void stm32_fmc2_nfc_set_buswidth_16(struct stm32_fmc2_nfc *nfc, bool set)
{
u32 pcr = readl_relaxed(nfc->io_base + FMC2_PCR);
- pcr &= ~FMC2_PCR_PWID_MASK;
+ pcr &= ~FMC2_PCR_PWID;
if (set)
- pcr |= FMC2_PCR_PWID(FMC2_PCR_PWID_BUSWIDTH_16);
+ pcr |= FIELD_PREP(FMC2_PCR_PWID, FMC2_PCR_PWID_BUSWIDTH_16);
writel_relaxed(pcr, nfc->io_base + FMC2_PCR);
}
@@ -659,16 +651,16 @@ static int stm32_fmc2_nfc_bch_decode(int eccsize, u8 *dat, u32 *ecc_sta)
if (unlikely(bchdsr0 & FMC2_BCHDSR0_DUE))
return -EBADMSG;
- pos[0] = bchdsr1 & FMC2_BCHDSR1_EBP1_MASK;
- pos[1] = (bchdsr1 & FMC2_BCHDSR1_EBP2_MASK) >> FMC2_BCHDSR1_EBP2_SHIFT;
- pos[2] = bchdsr2 & FMC2_BCHDSR2_EBP3_MASK;
- pos[3] = (bchdsr2 & FMC2_BCHDSR2_EBP4_MASK) >> FMC2_BCHDSR2_EBP4_SHIFT;
- pos[4] = bchdsr3 & FMC2_BCHDSR3_EBP5_MASK;
- pos[5] = (bchdsr3 & FMC2_BCHDSR3_EBP6_MASK) >> FMC2_BCHDSR3_EBP6_SHIFT;
- pos[6] = bchdsr4 & FMC2_BCHDSR4_EBP7_MASK;
- pos[7] = (bchdsr4 & FMC2_BCHDSR4_EBP8_MASK) >> FMC2_BCHDSR4_EBP8_SHIFT;
+ pos[0] = FIELD_GET(FMC2_BCHDSR1_EBP1, bchdsr1);
+ pos[1] = FIELD_GET(FMC2_BCHDSR1_EBP2, bchdsr1);
+ pos[2] = FIELD_GET(FMC2_BCHDSR2_EBP3, bchdsr2);
+ pos[3] = FIELD_GET(FMC2_BCHDSR2_EBP4, bchdsr2);
+ pos[4] = FIELD_GET(FMC2_BCHDSR3_EBP5, bchdsr3);
+ pos[5] = FIELD_GET(FMC2_BCHDSR3_EBP6, bchdsr3);
+ pos[6] = FIELD_GET(FMC2_BCHDSR4_EBP7, bchdsr4);
+ pos[7] = FIELD_GET(FMC2_BCHDSR4_EBP8, bchdsr4);
- den = (bchdsr0 & FMC2_BCHDSR0_DEN_MASK) >> FMC2_BCHDSR0_DEN_SHIFT;
+ den = FIELD_GET(FMC2_BCHDSR0_DEN, bchdsr0);
for (i = 0; i < den; i++) {
if (pos[i] < eccsize * 8) {
change_bit(pos[i], (unsigned long *)dat);
@@ -790,11 +782,11 @@ static void stm32_fmc2_nfc_rw_page_init(struct nand_chip *chip, int page,
*/
csqcfgr1 = FMC2_CSQCFGR1_DMADEN | FMC2_CSQCFGR1_CMD1T;
if (write_data)
- csqcfgr1 |= FMC2_CSQCFGR1_CMD1(NAND_CMD_SEQIN);
+ csqcfgr1 |= FIELD_PREP(FMC2_CSQCFGR1_CMD1, NAND_CMD_SEQIN);
else
- csqcfgr1 |= FMC2_CSQCFGR1_CMD1(NAND_CMD_READ0) |
+ csqcfgr1 |= FIELD_PREP(FMC2_CSQCFGR1_CMD1, NAND_CMD_READ0) |
FMC2_CSQCFGR1_CMD2EN |
- FMC2_CSQCFGR1_CMD2(NAND_CMD_READSTART) |
+ FIELD_PREP(FMC2_CSQCFGR1_CMD2, NAND_CMD_READSTART) |
FMC2_CSQCFGR1_CMD2T;
/*
@@ -804,11 +796,12 @@ static void stm32_fmc2_nfc_rw_page_init(struct nand_chip *chip, int page,
* - Set timings
*/
if (write_data)
- csqcfgr2 = FMC2_CSQCFGR2_RCMD1(NAND_CMD_RNDIN);
+ csqcfgr2 = FIELD_PREP(FMC2_CSQCFGR2_RCMD1, NAND_CMD_RNDIN);
else
- csqcfgr2 = FMC2_CSQCFGR2_RCMD1(NAND_CMD_RNDOUT) |
+ csqcfgr2 = FIELD_PREP(FMC2_CSQCFGR2_RCMD1, NAND_CMD_RNDOUT) |
FMC2_CSQCFGR2_RCMD2EN |
- FMC2_CSQCFGR2_RCMD2(NAND_CMD_RNDOUTSTART) |
+ FIELD_PREP(FMC2_CSQCFGR2_RCMD2,
+ NAND_CMD_RNDOUTSTART) |
FMC2_CSQCFGR2_RCMD1T |
FMC2_CSQCFGR2_RCMD2T;
if (!raw) {
@@ -820,7 +813,7 @@ static void stm32_fmc2_nfc_rw_page_init(struct nand_chip *chip, int page,
* - Set the number of sectors to be written
* - Set timings
*/
- csqcfgr3 = FMC2_CSQCFGR3_SNBR(chip->ecc.steps - 1);
+ csqcfgr3 = FIELD_PREP(FMC2_CSQCFGR3_SNBR, chip->ecc.steps - 1);
if (write_data) {
csqcfgr3 |= FMC2_CSQCFGR3_RAC2T;
if (chip->options & NAND_ROW_ADDR_3)
@@ -834,8 +827,8 @@ static void stm32_fmc2_nfc_rw_page_init(struct nand_chip *chip, int page,
* Byte 1 and byte 2 => column, we start at 0x0
* Byte 3 and byte 4 => page
*/
- csqar1 = FMC2_CSQCAR1_ADDC3(page);
- csqar1 |= FMC2_CSQCAR1_ADDC4(page >> 8);
+ csqar1 = FIELD_PREP(FMC2_CSQCAR1_ADDC3, page);
+ csqar1 |= FIELD_PREP(FMC2_CSQCAR1_ADDC4, page >> 8);
/*
* - Set chip enable number
@@ -843,16 +836,16 @@ static void stm32_fmc2_nfc_rw_page_init(struct nand_chip *chip, int page,
* - Calculate the number of address cycles to be issued
* - Set byte 5 of address cycle if needed
*/
- csqar2 = FMC2_CSQCAR2_NANDCEN(nfc->cs_sel);
+ csqar2 = FIELD_PREP(FMC2_CSQCAR2_NANDCEN, nfc->cs_sel);
if (chip->options & NAND_BUSWIDTH_16)
- csqar2 |= FMC2_CSQCAR2_SAO(ecc_offset >> 1);
+ csqar2 |= FIELD_PREP(FMC2_CSQCAR2_SAO, ecc_offset >> 1);
else
- csqar2 |= FMC2_CSQCAR2_SAO(ecc_offset);
+ csqar2 |= FIELD_PREP(FMC2_CSQCAR2_SAO, ecc_offset);
if (chip->options & NAND_ROW_ADDR_3) {
- csqcfgr1 |= FMC2_CSQCFGR1_ACYNBR(5);
- csqar2 |= FMC2_CSQCAR2_ADDC5(page >> 16);
+ csqcfgr1 |= FIELD_PREP(FMC2_CSQCFGR1_ACYNBR, 5);
+ csqar2 |= FIELD_PREP(FMC2_CSQCAR2_ADDC5, page >> 16);
} else {
- csqcfgr1 |= FMC2_CSQCFGR1_ACYNBR(4);
+ csqcfgr1 |= FIELD_PREP(FMC2_CSQCFGR1_ACYNBR, 4);
}
writel_relaxed(csqcfgr1, nfc->io_base + FMC2_CSQCFGR1);
@@ -1393,7 +1386,7 @@ static void stm32_fmc2_nfc_init(struct stm32_fmc2_nfc *nfc)
pcr |= FMC2_PCR_PBKEN;
/* Set buswidth to 8 bits mode for identification */
- pcr &= ~FMC2_PCR_PWID_MASK;
+ pcr &= ~FMC2_PCR_PWID;
/* ECC logic is disabled */
pcr &= ~FMC2_PCR_ECCEN;
@@ -1404,14 +1397,14 @@ static void stm32_fmc2_nfc_init(struct stm32_fmc2_nfc *nfc)
pcr &= ~FMC2_PCR_WEN;
/* Set default ECC sector size */
- pcr &= ~FMC2_PCR_ECCSS_MASK;
- pcr |= FMC2_PCR_ECCSS(FMC2_PCR_ECCSS_2048);
+ pcr &= ~FMC2_PCR_ECCSS;
+ pcr |= FIELD_PREP(FMC2_PCR_ECCSS, FMC2_PCR_ECCSS_2048);
/* Set default tclr/tar timings */
- pcr &= ~FMC2_PCR_TCLR_MASK;
- pcr |= FMC2_PCR_TCLR(FMC2_PCR_TCLR_DEFAULT);
- pcr &= ~FMC2_PCR_TAR_MASK;
- pcr |= FMC2_PCR_TAR(FMC2_PCR_TAR_DEFAULT);
+ pcr &= ~FMC2_PCR_TCLR;
+ pcr |= FIELD_PREP(FMC2_PCR_TCLR, FMC2_PCR_TCLR_DEFAULT);
+ pcr &= ~FMC2_PCR_TAR;
+ pcr |= FIELD_PREP(FMC2_PCR_TAR, FMC2_PCR_TAR_DEFAULT);
/* Enable FMC2 controller */
bcr1 |= FMC2_BCR1_FMC2EN;
--
1.9.1
This patch adds the documentation of the device tree bindings for the STM32
FMC2 EBI controller.
Signed-off-by: Christophe Kerello <[email protected]>
---
Changes in v4:
- fix filename: st,stm32-fmc2-ebi.yaml
Changes in v3:
- pattern name has been modified
- vendor properties have been modified
- s/_/-/
- add unit suffix (-ns) on timing properties
.../memory-controllers/st,stm32-fmc2-ebi.yaml | 261 +++++++++++++++++++++
1 file changed, 261 insertions(+)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
new file mode 100644
index 0000000..bf130c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
@@ -0,0 +1,261 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics Flexible Memory Controller 2 (FMC2) Bindings
+
+description: |
+ The FMC2 functional block makes the interface with: synchronous and
+ asynchronous static devices (such as PSNOR, PSRAM or other memory-mapped
+ peripherals) and NAND flash memories.
+ Its main purposes are:
+ - to translate AXI transactions into the appropriate external device
+ protocol
+ - to meet the access time requirements of the external devices
+ All external devices share the addresses, data and control signals with the
+ controller. Each external device is accessed by means of a unique Chip
+ Select. The FMC2 performs only one access at a time to an external device.
+
+maintainers:
+ - Christophe Kerello <[email protected]>
+
+properties:
+ compatible:
+ const: st,stm32mp1-fmc2-ebi
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 1
+
+ ranges:
+ description: |
+ Reflects the memory layout with four integer values per bank. Format:
+ <bank-number> 0 <address of the bank> <size>
+
+patternProperties:
+ "^.*@[0-4],[a-f0-9]+$":
+ type: object
+
+ properties:
+ reg:
+ description: Bank number, base address and size of the device.
+
+ st,fmc2-ebi-cs-transaction-type:
+ description: |
+ Select one of the transactions type supported
+ 0: Asynchronous mode 1 SRAM/FRAM.
+ 1: Asynchronous mode 1 PSRAM.
+ 2: Asynchronous mode A SRAM/FRAM.
+ 3: Asynchronous mode A PSRAM.
+ 4: Asynchronous mode 2 NOR.
+ 5: Asynchronous mode B NOR.
+ 6: Asynchronous mode C NOR.
+ 7: Asynchronous mode D NOR.
+ 8: Synchronous read synchronous write PSRAM.
+ 9: Synchronous read asynchronous write PSRAM.
+ 10: Synchronous read synchronous write NOR.
+ 11: Synchronous read asynchronous write NOR.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 11
+
+ st,fmc2-ebi-cs-cclk-enable:
+ description: Continuous clock enable (first bank must be configured
+ in synchronous mode). The FMC_CLK is generated continuously
+ during asynchronous and synchronous access. By default, the
+ FMC_CLK is only generated during synchronous access.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ st,fmc2-ebi-cs-mux-enable:
+ description: Address/Data multiplexed on databus (valid only with
+ NOR and PSRAM transactions type). By default, Address/Data
+ are not multiplexed.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ st,fmc2-ebi-cs-buswidth:
+ description: Data bus width
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 8, 16 ]
+ default: 16
+
+ st,fmc2-ebi-cs-waitpol-high:
+ description: Wait signal polarity (NWAIT signal active high).
+ By default, NWAIT is active low.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ st,fmc2-ebi-cs-waitcfg-enable:
+ description: The NWAIT signal indicates wheither the data from the
+ device are valid or if a wait state must be inserted when
+ accessing the device in synchronous mode. By default, the
+ NWAIT signal is active one data cycle before wait state.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ st,fmc2-ebi-cs-wait-enable:
+ description: The NWAIT signal is enabled (its level is taken into
+ account after the programmed latency period to insert wait
+ states if asserted). By default, the NWAIT signal is
+ disabled.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ st,fmc2-ebi-cs-asyncwait-enable:
+ description: The NWAIT signal is taken into account during asynchronous
+ transactions. By default, the NWAIT signal is not taken
+ into account during asynchronous transactions.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ st,fmc2-ebi-cs-cpsize:
+ description: CRAM page size. The controller splits the burst access
+ when the memory page is reached. By default, no burst
+ split when crossing page boundary.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 128, 256, 512, 1024 ]
+ default: 0
+
+ st,fmc2-ebi-cs-byte-lane-setup-ns:
+ description: This property configures the byte lane setup timing
+ defined in nanoseconds from NBLx low to Chip Select NEx
+ low.
+
+ st,fmc2-ebi-cs-address-setup-ns:
+ description: This property defines the duration of the address setup
+ phase in nanoseconds used for asynchronous read/write
+ transactions.
+
+ st,fmc2-ebi-cs-address-hold-ns:
+ description: This property defines the duration of the address hold
+ phase in nanoseconds used for asynchronous multiplexed
+ read/write transactions.
+
+ st,fmc2-ebi-cs-data-setup-ns:
+ description: This property defines the duration of the data setup phase
+ in nanoseconds used for asynchronous read/write
+ transactions.
+
+ st,fmc2-ebi-cs-bus-turnaround-ns:
+ description: This property defines the delay in nanoseconds between the
+ end of current read/write transaction and the next
+ transaction.
+
+ st,fmc2-ebi-cs-data-hold-ns:
+ description: This property defines the duration of the data hold phase
+ in nanoseconds used for asynchronous read/write
+ transactions.
+
+ st,fmc2-ebi-cs-clk-period-ns:
+ description: This property defines the FMC_CLK output signal period in
+ nanoseconds.
+
+ st,fmc2-ebi-cs-data-latency-ns:
+ description: This property defines the data latency before reading or
+ writing the first data in nanoseconds.
+
+ st,fmc2_ebi-cs-write-address-setup-ns:
+ description: This property defines the duration of the address setup
+ phase in nanoseconds used for asynchronous write
+ transactions.
+
+ st,fmc2-ebi-cs-write-address-hold-ns:
+ description: This property defines the duration of the address hold
+ phase in nanoseconds used for asynchronous multiplexed
+ write transactions.
+
+ st,fmc2-ebi-cs-write-data-setup-ns:
+ description: This property defines the duration of the data setup
+ phase in nanoseconds used for asynchronous write
+ transactions.
+
+ st,fmc2-ebi-cs-write-bus-turnaround-ns:
+ description: This property defines the delay between the end of current
+ write transaction and the next transaction in nanoseconds.
+
+ st,fmc2-ebi-cs-write-data-hold-ns:
+ description: This property defines the duration of the data hold phase
+ in nanoseconds used for asynchronous write transactions.
+
+ st,fmc2-ebi-cs-max-low-pulse-ns:
+ description: This property defines the maximum chip select low pulse
+ duration in nanoseconds for synchronous transactions. When
+ this timing reaches 0, the controller splits the current
+ access, toggles NE to allow device refresh and restarts a
+ new access.
+
+ required:
+ - reg
+
+required:
+ - "#address-cells"
+ - "#size-cells"
+ - compatible
+ - reg
+ - clocks
+ - ranges
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ memory-controller@58002000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp1-fmc2-ebi";
+ reg = <0x58002000 0x1000>;
+ clocks = <&rcc FMC_K>;
+ resets = <&rcc FMC_R>;
+
+ ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+ <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+ <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+ <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+ <4 0 0x80000000 0x10000000>; /* NAND */
+
+ psram@0,0 {
+ compatible = "mtd-ram";
+ reg = <0 0x00000000 0x100000>;
+ bank-width = <2>;
+
+ st,fmc2-ebi-cs-transaction-type = <1>;
+ st,fmc2-ebi-cs-address-setup-ns = <60>;
+ st,fmc2-ebi-cs-data-setup-ns = <30>;
+ st,fmc2-ebi-cs-bus-turnaround-ns = <5>;
+ };
+
+ nand-controller@4,0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32mp15-fmc2";
+ reg = <4 0x00000000 0x1000>,
+ <4 0x08010000 0x1000>,
+ <4 0x08020000 0x1000>,
+ <4 0x01000000 0x1000>,
+ <4 0x09010000 0x1000>,
+ <4 0x09020000 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
+ <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
+ <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
+ dma-names = "tx", "rx", "ecc";
+
+ nand@0 {
+ reg = <0>;
+ nand-on-flash-bbt;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+ };
+
+...
--
1.9.1
This patch renames functions and local variables.
This cleanup is done to get all functions starting by stm32_fmc2_nfc
in the FMC2 raw NAND driver when all functions will start by
stm32_fmc2_ebi in the FMC2 EBI driver.
Signed-off-by: Christophe Kerello <[email protected]>
Reviewed-by: Miquel Raynal <[email protected]>
---
Changes in v3:
- fix s/conf/cf/, s/nfc/NFC/
- add Miquel reviewed-by tag
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 810 ++++++++++++++++-----------------
1 file changed, 403 insertions(+), 407 deletions(-)
diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 5778a95..0d108fb 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -280,12 +280,12 @@ static inline struct stm32_fmc2_nfc *to_stm32_nfc(struct nand_controller *base)
return container_of(base, struct stm32_fmc2_nfc, base);
}
-static void stm32_fmc2_timings_init(struct nand_chip *chip)
+static void stm32_fmc2_nfc_timings_init(struct nand_chip *chip)
{
- struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
+ struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
struct stm32_fmc2_nand *nand = to_fmc2_nand(chip);
struct stm32_fmc2_timings *timings = &nand->timings;
- u32 pcr = readl_relaxed(fmc2->io_base + FMC2_PCR);
+ u32 pcr = readl_relaxed(nfc->io_base + FMC2_PCR);
u32 pmem, patt;
/* Set tclr/tar timings */
@@ -306,15 +306,15 @@ static void stm32_fmc2_timings_init(struct nand_chip *chip)
patt |= FMC2_PATT_ATTHOLD(timings->thold_att);
patt |= FMC2_PATT_ATTHIZ(timings->thiz);
- writel_relaxed(pcr, fmc2->io_base + FMC2_PCR);
- writel_relaxed(pmem, fmc2->io_base + FMC2_PMEM);
- writel_relaxed(patt, fmc2->io_base + FMC2_PATT);
+ writel_relaxed(pcr, nfc->io_base + FMC2_PCR);
+ writel_relaxed(pmem, nfc->io_base + FMC2_PMEM);
+ writel_relaxed(patt, nfc->io_base + FMC2_PATT);
}
-static void stm32_fmc2_setup(struct nand_chip *chip)
+static void stm32_fmc2_nfc_setup(struct nand_chip *chip)
{
- struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
- u32 pcr = readl_relaxed(fmc2->io_base + FMC2_PCR);
+ struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
+ u32 pcr = readl_relaxed(nfc->io_base + FMC2_PCR);
/* Configure ECC algorithm (default configuration is Hamming) */
pcr &= ~FMC2_PCR_ECCALG;
@@ -335,174 +335,174 @@ static void stm32_fmc2_setup(struct nand_chip *chip)
pcr &= ~FMC2_PCR_ECCSS_MASK;
pcr |= FMC2_PCR_ECCSS(FMC2_PCR_ECCSS_512);
- writel_relaxed(pcr, fmc2->io_base + FMC2_PCR);
+ writel_relaxed(pcr, nfc->io_base + FMC2_PCR);
}
-static int stm32_fmc2_select_chip(struct nand_chip *chip, int chipnr)
+static int stm32_fmc2_nfc_select_chip(struct nand_chip *chip, int chipnr)
{
- struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
+ struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
struct stm32_fmc2_nand *nand = to_fmc2_nand(chip);
struct dma_slave_config dma_cfg;
int ret;
- if (nand->cs_used[chipnr] == fmc2->cs_sel)
+ if (nand->cs_used[chipnr] == nfc->cs_sel)
return 0;
- fmc2->cs_sel = nand->cs_used[chipnr];
- stm32_fmc2_setup(chip);
- stm32_fmc2_timings_init(chip);
+ nfc->cs_sel = nand->cs_used[chipnr];
+ stm32_fmc2_nfc_setup(chip);
+ stm32_fmc2_nfc_timings_init(chip);
- if (fmc2->dma_tx_ch && fmc2->dma_rx_ch) {
+ if (nfc->dma_tx_ch && nfc->dma_rx_ch) {
memset(&dma_cfg, 0, sizeof(dma_cfg));
- dma_cfg.src_addr = fmc2->data_phys_addr[fmc2->cs_sel];
- dma_cfg.dst_addr = fmc2->data_phys_addr[fmc2->cs_sel];
+ dma_cfg.src_addr = nfc->data_phys_addr[nfc->cs_sel];
+ dma_cfg.dst_addr = nfc->data_phys_addr[nfc->cs_sel];
dma_cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
dma_cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
dma_cfg.src_maxburst = 32;
dma_cfg.dst_maxburst = 32;
- ret = dmaengine_slave_config(fmc2->dma_tx_ch, &dma_cfg);
+ ret = dmaengine_slave_config(nfc->dma_tx_ch, &dma_cfg);
if (ret) {
- dev_err(fmc2->dev, "tx DMA engine slave config failed\n");
+ dev_err(nfc->dev, "tx DMA engine slave config failed\n");
return ret;
}
- ret = dmaengine_slave_config(fmc2->dma_rx_ch, &dma_cfg);
+ ret = dmaengine_slave_config(nfc->dma_rx_ch, &dma_cfg);
if (ret) {
- dev_err(fmc2->dev, "rx DMA engine slave config failed\n");
+ dev_err(nfc->dev, "rx DMA engine slave config failed\n");
return ret;
}
}
- if (fmc2->dma_ecc_ch) {
+ if (nfc->dma_ecc_ch) {
/*
* Hamming: we read HECCR register
* BCH4/BCH8: we read BCHDSRSx registers
*/
memset(&dma_cfg, 0, sizeof(dma_cfg));
- dma_cfg.src_addr = fmc2->io_phys_addr;
+ dma_cfg.src_addr = nfc->io_phys_addr;
dma_cfg.src_addr += chip->ecc.strength == FMC2_ECC_HAM ?
FMC2_HECCR : FMC2_BCHDSR0;
dma_cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- ret = dmaengine_slave_config(fmc2->dma_ecc_ch, &dma_cfg);
+ ret = dmaengine_slave_config(nfc->dma_ecc_ch, &dma_cfg);
if (ret) {
- dev_err(fmc2->dev, "ECC DMA engine slave config failed\n");
+ dev_err(nfc->dev, "ECC DMA engine slave config failed\n");
return ret;
}
/* Calculate ECC length needed for one sector */
- fmc2->dma_ecc_len = chip->ecc.strength == FMC2_ECC_HAM ?
- FMC2_HECCR_LEN : FMC2_BCHDSRS_LEN;
+ nfc->dma_ecc_len = chip->ecc.strength == FMC2_ECC_HAM ?
+ FMC2_HECCR_LEN : FMC2_BCHDSRS_LEN;
}
return 0;
}
-static void stm32_fmc2_set_buswidth_16(struct stm32_fmc2_nfc *fmc2, bool set)
+static void stm32_fmc2_nfc_set_buswidth_16(struct stm32_fmc2_nfc *nfc, bool set)
{
- u32 pcr = readl_relaxed(fmc2->io_base + FMC2_PCR);
+ u32 pcr = readl_relaxed(nfc->io_base + FMC2_PCR);
pcr &= ~FMC2_PCR_PWID_MASK;
if (set)
pcr |= FMC2_PCR_PWID(FMC2_PCR_PWID_BUSWIDTH_16);
- writel_relaxed(pcr, fmc2->io_base + FMC2_PCR);
+ writel_relaxed(pcr, nfc->io_base + FMC2_PCR);
}
-static void stm32_fmc2_set_ecc(struct stm32_fmc2_nfc *fmc2, bool enable)
+static void stm32_fmc2_nfc_set_ecc(struct stm32_fmc2_nfc *nfc, bool enable)
{
- u32 pcr = readl(fmc2->io_base + FMC2_PCR);
+ u32 pcr = readl(nfc->io_base + FMC2_PCR);
pcr &= ~FMC2_PCR_ECCEN;
if (enable)
pcr |= FMC2_PCR_ECCEN;
- writel(pcr, fmc2->io_base + FMC2_PCR);
+ writel(pcr, nfc->io_base + FMC2_PCR);
}
-static inline void stm32_fmc2_enable_seq_irq(struct stm32_fmc2_nfc *fmc2)
+static inline void stm32_fmc2_nfc_enable_seq_irq(struct stm32_fmc2_nfc *nfc)
{
- u32 csqier = readl_relaxed(fmc2->io_base + FMC2_CSQIER);
+ u32 csqier = readl_relaxed(nfc->io_base + FMC2_CSQIER);
csqier |= FMC2_CSQIER_TCIE;
- fmc2->irq_state = FMC2_IRQ_SEQ;
+ nfc->irq_state = FMC2_IRQ_SEQ;
- writel_relaxed(csqier, fmc2->io_base + FMC2_CSQIER);
+ writel_relaxed(csqier, nfc->io_base + FMC2_CSQIER);
}
-static inline void stm32_fmc2_disable_seq_irq(struct stm32_fmc2_nfc *fmc2)
+static inline void stm32_fmc2_nfc_disable_seq_irq(struct stm32_fmc2_nfc *nfc)
{
- u32 csqier = readl_relaxed(fmc2->io_base + FMC2_CSQIER);
+ u32 csqier = readl_relaxed(nfc->io_base + FMC2_CSQIER);
csqier &= ~FMC2_CSQIER_TCIE;
- writel_relaxed(csqier, fmc2->io_base + FMC2_CSQIER);
+ writel_relaxed(csqier, nfc->io_base + FMC2_CSQIER);
- fmc2->irq_state = FMC2_IRQ_UNKNOWN;
+ nfc->irq_state = FMC2_IRQ_UNKNOWN;
}
-static inline void stm32_fmc2_clear_seq_irq(struct stm32_fmc2_nfc *fmc2)
+static inline void stm32_fmc2_nfc_clear_seq_irq(struct stm32_fmc2_nfc *nfc)
{
- writel_relaxed(FMC2_CSQICR_CLEAR_IRQ, fmc2->io_base + FMC2_CSQICR);
+ writel_relaxed(FMC2_CSQICR_CLEAR_IRQ, nfc->io_base + FMC2_CSQICR);
}
-static inline void stm32_fmc2_enable_bch_irq(struct stm32_fmc2_nfc *fmc2,
- int mode)
+static inline void stm32_fmc2_nfc_enable_bch_irq(struct stm32_fmc2_nfc *nfc,
+ int mode)
{
- u32 bchier = readl_relaxed(fmc2->io_base + FMC2_BCHIER);
+ u32 bchier = readl_relaxed(nfc->io_base + FMC2_BCHIER);
if (mode == NAND_ECC_WRITE)
bchier |= FMC2_BCHIER_EPBRIE;
else
bchier |= FMC2_BCHIER_DERIE;
- fmc2->irq_state = FMC2_IRQ_BCH;
+ nfc->irq_state = FMC2_IRQ_BCH;
- writel_relaxed(bchier, fmc2->io_base + FMC2_BCHIER);
+ writel_relaxed(bchier, nfc->io_base + FMC2_BCHIER);
}
-static inline void stm32_fmc2_disable_bch_irq(struct stm32_fmc2_nfc *fmc2)
+static inline void stm32_fmc2_nfc_disable_bch_irq(struct stm32_fmc2_nfc *nfc)
{
- u32 bchier = readl_relaxed(fmc2->io_base + FMC2_BCHIER);
+ u32 bchier = readl_relaxed(nfc->io_base + FMC2_BCHIER);
bchier &= ~FMC2_BCHIER_DERIE;
bchier &= ~FMC2_BCHIER_EPBRIE;
- writel_relaxed(bchier, fmc2->io_base + FMC2_BCHIER);
+ writel_relaxed(bchier, nfc->io_base + FMC2_BCHIER);
- fmc2->irq_state = FMC2_IRQ_UNKNOWN;
+ nfc->irq_state = FMC2_IRQ_UNKNOWN;
}
-static inline void stm32_fmc2_clear_bch_irq(struct stm32_fmc2_nfc *fmc2)
+static inline void stm32_fmc2_nfc_clear_bch_irq(struct stm32_fmc2_nfc *nfc)
{
- writel_relaxed(FMC2_BCHICR_CLEAR_IRQ, fmc2->io_base + FMC2_BCHICR);
+ writel_relaxed(FMC2_BCHICR_CLEAR_IRQ, nfc->io_base + FMC2_BCHICR);
}
/*
* Enable ECC logic and reset syndrome/parity bits previously calculated
* Syndrome/parity bits is cleared by setting the ECCEN bit to 0
*/
-static void stm32_fmc2_hwctl(struct nand_chip *chip, int mode)
+static void stm32_fmc2_nfc_hwctl(struct nand_chip *chip, int mode)
{
- struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
+ struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
- stm32_fmc2_set_ecc(fmc2, false);
+ stm32_fmc2_nfc_set_ecc(nfc, false);
if (chip->ecc.strength != FMC2_ECC_HAM) {
- u32 pcr = readl_relaxed(fmc2->io_base + FMC2_PCR);
+ u32 pcr = readl_relaxed(nfc->io_base + FMC2_PCR);
if (mode == NAND_ECC_WRITE)
pcr |= FMC2_PCR_WEN;
else
pcr &= ~FMC2_PCR_WEN;
- writel_relaxed(pcr, fmc2->io_base + FMC2_PCR);
+ writel_relaxed(pcr, nfc->io_base + FMC2_PCR);
- reinit_completion(&fmc2->complete);
- stm32_fmc2_clear_bch_irq(fmc2);
- stm32_fmc2_enable_bch_irq(fmc2, mode);
+ reinit_completion(&nfc->complete);
+ stm32_fmc2_nfc_clear_bch_irq(nfc);
+ stm32_fmc2_nfc_enable_bch_irq(nfc, mode);
}
- stm32_fmc2_set_ecc(fmc2, true);
+ stm32_fmc2_nfc_set_ecc(nfc, true);
}
/*
@@ -510,37 +510,37 @@ static void stm32_fmc2_hwctl(struct nand_chip *chip, int mode)
* ECC is 3 bytes for 512 bytes of data (supports error correction up to
* max of 1-bit)
*/
-static inline void stm32_fmc2_ham_set_ecc(const u32 ecc_sta, u8 *ecc)
+static inline void stm32_fmc2_nfc_ham_set_ecc(const u32 ecc_sta, u8 *ecc)
{
ecc[0] = ecc_sta;
ecc[1] = ecc_sta >> 8;
ecc[2] = ecc_sta >> 16;
}
-static int stm32_fmc2_ham_calculate(struct nand_chip *chip, const u8 *data,
- u8 *ecc)
+static int stm32_fmc2_nfc_ham_calculate(struct nand_chip *chip, const u8 *data,
+ u8 *ecc)
{
- struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
+ struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
u32 sr, heccr;
int ret;
- ret = readl_relaxed_poll_timeout(fmc2->io_base + FMC2_SR,
+ ret = readl_relaxed_poll_timeout(nfc->io_base + FMC2_SR,
sr, sr & FMC2_SR_NWRF, 1,
1000 * FMC2_TIMEOUT_MS);
if (ret) {
- dev_err(fmc2->dev, "ham timeout\n");
+ dev_err(nfc->dev, "ham timeout\n");
return ret;
}
- heccr = readl_relaxed(fmc2->io_base + FMC2_HECCR);
- stm32_fmc2_ham_set_ecc(heccr, ecc);
- stm32_fmc2_set_ecc(fmc2, false);
+ heccr = readl_relaxed(nfc->io_base + FMC2_HECCR);
+ stm32_fmc2_nfc_ham_set_ecc(heccr, ecc);
+ stm32_fmc2_nfc_set_ecc(nfc, false);
return 0;
}
-static int stm32_fmc2_ham_correct(struct nand_chip *chip, u8 *dat,
- u8 *read_ecc, u8 *calc_ecc)
+static int stm32_fmc2_nfc_ham_correct(struct nand_chip *chip, u8 *dat,
+ u8 *read_ecc, u8 *calc_ecc)
{
u8 bit_position = 0, b0, b1, b2;
u32 byte_addr = 0, b;
@@ -596,28 +596,28 @@ static int stm32_fmc2_ham_correct(struct nand_chip *chip, u8 *dat,
* ECC is 7/13 bytes for 512 bytes of data (supports error correction up to
* max of 4-bit/8-bit)
*/
-static int stm32_fmc2_bch_calculate(struct nand_chip *chip, const u8 *data,
- u8 *ecc)
+static int stm32_fmc2_nfc_bch_calculate(struct nand_chip *chip, const u8 *data,
+ u8 *ecc)
{
- struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
+ struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
u32 bchpbr;
/* Wait until the BCH code is ready */
- if (!wait_for_completion_timeout(&fmc2->complete,
+ if (!wait_for_completion_timeout(&nfc->complete,
msecs_to_jiffies(FMC2_TIMEOUT_MS))) {
- dev_err(fmc2->dev, "bch timeout\n");
- stm32_fmc2_disable_bch_irq(fmc2);
+ dev_err(nfc->dev, "bch timeout\n");
+ stm32_fmc2_nfc_disable_bch_irq(nfc);
return -ETIMEDOUT;
}
/* Read parity bits */
- bchpbr = readl_relaxed(fmc2->io_base + FMC2_BCHPBR1);
+ bchpbr = readl_relaxed(nfc->io_base + FMC2_BCHPBR1);
ecc[0] = bchpbr;
ecc[1] = bchpbr >> 8;
ecc[2] = bchpbr >> 16;
ecc[3] = bchpbr >> 24;
- bchpbr = readl_relaxed(fmc2->io_base + FMC2_BCHPBR2);
+ bchpbr = readl_relaxed(nfc->io_base + FMC2_BCHPBR2);
ecc[4] = bchpbr;
ecc[5] = bchpbr >> 8;
ecc[6] = bchpbr >> 16;
@@ -625,22 +625,22 @@ static int stm32_fmc2_bch_calculate(struct nand_chip *chip, const u8 *data,
if (chip->ecc.strength == FMC2_ECC_BCH8) {
ecc[7] = bchpbr >> 24;
- bchpbr = readl_relaxed(fmc2->io_base + FMC2_BCHPBR3);
+ bchpbr = readl_relaxed(nfc->io_base + FMC2_BCHPBR3);
ecc[8] = bchpbr;
ecc[9] = bchpbr >> 8;
ecc[10] = bchpbr >> 16;
ecc[11] = bchpbr >> 24;
- bchpbr = readl_relaxed(fmc2->io_base + FMC2_BCHPBR4);
+ bchpbr = readl_relaxed(nfc->io_base + FMC2_BCHPBR4);
ecc[12] = bchpbr;
}
- stm32_fmc2_set_ecc(fmc2, false);
+ stm32_fmc2_nfc_set_ecc(nfc, false);
return 0;
}
-static int stm32_fmc2_bch_decode(int eccsize, u8 *dat, u32 *ecc_sta)
+static int stm32_fmc2_nfc_bch_decode(int eccsize, u8 *dat, u32 *ecc_sta)
{
u32 bchdsr0 = ecc_sta[0];
u32 bchdsr1 = ecc_sta[1];
@@ -679,33 +679,33 @@ static int stm32_fmc2_bch_decode(int eccsize, u8 *dat, u32 *ecc_sta)
return nb_errs;
}
-static int stm32_fmc2_bch_correct(struct nand_chip *chip, u8 *dat,
- u8 *read_ecc, u8 *calc_ecc)
+static int stm32_fmc2_nfc_bch_correct(struct nand_chip *chip, u8 *dat,
+ u8 *read_ecc, u8 *calc_ecc)
{
- struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
+ struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
u32 ecc_sta[5];
/* Wait until the decoding error is ready */
- if (!wait_for_completion_timeout(&fmc2->complete,
+ if (!wait_for_completion_timeout(&nfc->complete,
msecs_to_jiffies(FMC2_TIMEOUT_MS))) {
- dev_err(fmc2->dev, "bch timeout\n");
- stm32_fmc2_disable_bch_irq(fmc2);
+ dev_err(nfc->dev, "bch timeout\n");
+ stm32_fmc2_nfc_disable_bch_irq(nfc);
return -ETIMEDOUT;
}
- ecc_sta[0] = readl_relaxed(fmc2->io_base + FMC2_BCHDSR0);
- ecc_sta[1] = readl_relaxed(fmc2->io_base + FMC2_BCHDSR1);
- ecc_sta[2] = readl_relaxed(fmc2->io_base + FMC2_BCHDSR2);
- ecc_sta[3] = readl_relaxed(fmc2->io_base + FMC2_BCHDSR3);
- ecc_sta[4] = readl_relaxed(fmc2->io_base + FMC2_BCHDSR4);
+ ecc_sta[0] = readl_relaxed(nfc->io_base + FMC2_BCHDSR0);
+ ecc_sta[1] = readl_relaxed(nfc->io_base + FMC2_BCHDSR1);
+ ecc_sta[2] = readl_relaxed(nfc->io_base + FMC2_BCHDSR2);
+ ecc_sta[3] = readl_relaxed(nfc->io_base + FMC2_BCHDSR3);
+ ecc_sta[4] = readl_relaxed(nfc->io_base + FMC2_BCHDSR4);
- stm32_fmc2_set_ecc(fmc2, false);
+ stm32_fmc2_nfc_set_ecc(nfc, false);
- return stm32_fmc2_bch_decode(chip->ecc.size, dat, ecc_sta);
+ return stm32_fmc2_nfc_bch_decode(chip->ecc.size, dat, ecc_sta);
}
-static int stm32_fmc2_read_page(struct nand_chip *chip, u8 *buf,
- int oob_required, int page)
+static int stm32_fmc2_nfc_read_page(struct nand_chip *chip, u8 *buf,
+ int oob_required, int page)
{
struct mtd_info *mtd = nand_to_mtd(chip);
int ret, i, s, stat, eccsize = chip->ecc.size;
@@ -767,21 +767,21 @@ static int stm32_fmc2_read_page(struct nand_chip *chip, u8 *buf,
}
/* Sequencer read/write configuration */
-static void stm32_fmc2_rw_page_init(struct nand_chip *chip, int page,
- int raw, bool write_data)
+static void stm32_fmc2_nfc_rw_page_init(struct nand_chip *chip, int page,
+ int raw, bool write_data)
{
- struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
+ struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
struct mtd_info *mtd = nand_to_mtd(chip);
u32 csqcfgr1, csqcfgr2, csqcfgr3;
u32 csqar1, csqar2;
u32 ecc_offset = mtd->writesize + FMC2_BBM_LEN;
- u32 pcr = readl_relaxed(fmc2->io_base + FMC2_PCR);
+ u32 pcr = readl_relaxed(nfc->io_base + FMC2_PCR);
if (write_data)
pcr |= FMC2_PCR_WEN;
else
pcr &= ~FMC2_PCR_WEN;
- writel_relaxed(pcr, fmc2->io_base + FMC2_PCR);
+ writel_relaxed(pcr, nfc->io_base + FMC2_PCR);
/*
* - Set Program Page/Page Read command
@@ -843,7 +843,7 @@ static void stm32_fmc2_rw_page_init(struct nand_chip *chip, int page,
* - Calculate the number of address cycles to be issued
* - Set byte 5 of address cycle if needed
*/
- csqar2 = FMC2_CSQCAR2_NANDCEN(fmc2->cs_sel);
+ csqar2 = FMC2_CSQCAR2_NANDCEN(nfc->cs_sel);
if (chip->options & NAND_BUSWIDTH_16)
csqar2 |= FMC2_CSQCAR2_SAO(ecc_offset >> 1);
else
@@ -855,31 +855,32 @@ static void stm32_fmc2_rw_page_init(struct nand_chip *chip, int page,
csqcfgr1 |= FMC2_CSQCFGR1_ACYNBR(4);
}
- writel_relaxed(csqcfgr1, fmc2->io_base + FMC2_CSQCFGR1);
- writel_relaxed(csqcfgr2, fmc2->io_base + FMC2_CSQCFGR2);
- writel_relaxed(csqcfgr3, fmc2->io_base + FMC2_CSQCFGR3);
- writel_relaxed(csqar1, fmc2->io_base + FMC2_CSQAR1);
- writel_relaxed(csqar2, fmc2->io_base + FMC2_CSQAR2);
+ writel_relaxed(csqcfgr1, nfc->io_base + FMC2_CSQCFGR1);
+ writel_relaxed(csqcfgr2, nfc->io_base + FMC2_CSQCFGR2);
+ writel_relaxed(csqcfgr3, nfc->io_base + FMC2_CSQCFGR3);
+ writel_relaxed(csqar1, nfc->io_base + FMC2_CSQAR1);
+ writel_relaxed(csqar2, nfc->io_base + FMC2_CSQAR2);
}
-static void stm32_fmc2_dma_callback(void *arg)
+static void stm32_fmc2_nfc_dma_callback(void *arg)
{
complete((struct completion *)arg);
}
/* Read/write data from/to a page */
-static int stm32_fmc2_xfer(struct nand_chip *chip, const u8 *buf,
- int raw, bool write_data)
+static int stm32_fmc2_nfc_xfer(struct nand_chip *chip, const u8 *buf,
+ int raw, bool write_data)
{
- struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
+ struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
struct dma_async_tx_descriptor *desc_data, *desc_ecc;
struct scatterlist *sg;
- struct dma_chan *dma_ch = fmc2->dma_rx_ch;
+ struct dma_chan *dma_ch = nfc->dma_rx_ch;
enum dma_data_direction dma_data_dir = DMA_FROM_DEVICE;
enum dma_transfer_direction dma_transfer_dir = DMA_DEV_TO_MEM;
- u32 csqcr = readl_relaxed(fmc2->io_base + FMC2_CSQCR);
+ u32 csqcr = readl_relaxed(nfc->io_base + FMC2_CSQCR);
int eccsteps = chip->ecc.steps;
int eccsize = chip->ecc.size;
+ unsigned long timeout = msecs_to_jiffies(FMC2_TIMEOUT_MS);
const u8 *p = buf;
int s, ret;
@@ -887,20 +888,20 @@ static int stm32_fmc2_xfer(struct nand_chip *chip, const u8 *buf,
if (write_data) {
dma_data_dir = DMA_TO_DEVICE;
dma_transfer_dir = DMA_MEM_TO_DEV;
- dma_ch = fmc2->dma_tx_ch;
+ dma_ch = nfc->dma_tx_ch;
}
- for_each_sg(fmc2->dma_data_sg.sgl, sg, eccsteps, s) {
+ for_each_sg(nfc->dma_data_sg.sgl, sg, eccsteps, s) {
sg_set_buf(sg, p, eccsize);
p += eccsize;
}
- ret = dma_map_sg(fmc2->dev, fmc2->dma_data_sg.sgl,
+ ret = dma_map_sg(nfc->dev, nfc->dma_data_sg.sgl,
eccsteps, dma_data_dir);
if (ret < 0)
return ret;
- desc_data = dmaengine_prep_slave_sg(dma_ch, fmc2->dma_data_sg.sgl,
+ desc_data = dmaengine_prep_slave_sg(dma_ch, nfc->dma_data_sg.sgl,
eccsteps, dma_transfer_dir,
DMA_PREP_INTERRUPT);
if (!desc_data) {
@@ -908,10 +909,10 @@ static int stm32_fmc2_xfer(struct nand_chip *chip, const u8 *buf,
goto err_unmap_data;
}
- reinit_completion(&fmc2->dma_data_complete);
- reinit_completion(&fmc2->complete);
- desc_data->callback = stm32_fmc2_dma_callback;
- desc_data->callback_param = &fmc2->dma_data_complete;
+ reinit_completion(&nfc->dma_data_complete);
+ reinit_completion(&nfc->complete);
+ desc_data->callback = stm32_fmc2_nfc_dma_callback;
+ desc_data->callback_param = &nfc->dma_data_complete;
ret = dma_submit_error(dmaengine_submit(desc_data));
if (ret)
goto err_unmap_data;
@@ -920,19 +921,19 @@ static int stm32_fmc2_xfer(struct nand_chip *chip, const u8 *buf,
if (!write_data && !raw) {
/* Configure DMA ECC status */
- p = fmc2->ecc_buf;
- for_each_sg(fmc2->dma_ecc_sg.sgl, sg, eccsteps, s) {
- sg_set_buf(sg, p, fmc2->dma_ecc_len);
- p += fmc2->dma_ecc_len;
+ p = nfc->ecc_buf;
+ for_each_sg(nfc->dma_ecc_sg.sgl, sg, eccsteps, s) {
+ sg_set_buf(sg, p, nfc->dma_ecc_len);
+ p += nfc->dma_ecc_len;
}
- ret = dma_map_sg(fmc2->dev, fmc2->dma_ecc_sg.sgl,
+ ret = dma_map_sg(nfc->dev, nfc->dma_ecc_sg.sgl,
eccsteps, dma_data_dir);
if (ret < 0)
goto err_unmap_data;
- desc_ecc = dmaengine_prep_slave_sg(fmc2->dma_ecc_ch,
- fmc2->dma_ecc_sg.sgl,
+ desc_ecc = dmaengine_prep_slave_sg(nfc->dma_ecc_ch,
+ nfc->dma_ecc_sg.sgl,
eccsteps, dma_transfer_dir,
DMA_PREP_INTERRUPT);
if (!desc_ecc) {
@@ -940,76 +941,73 @@ static int stm32_fmc2_xfer(struct nand_chip *chip, const u8 *buf,
goto err_unmap_ecc;
}
- reinit_completion(&fmc2->dma_ecc_complete);
- desc_ecc->callback = stm32_fmc2_dma_callback;
- desc_ecc->callback_param = &fmc2->dma_ecc_complete;
+ reinit_completion(&nfc->dma_ecc_complete);
+ desc_ecc->callback = stm32_fmc2_nfc_dma_callback;
+ desc_ecc->callback_param = &nfc->dma_ecc_complete;
ret = dma_submit_error(dmaengine_submit(desc_ecc));
if (ret)
goto err_unmap_ecc;
- dma_async_issue_pending(fmc2->dma_ecc_ch);
+ dma_async_issue_pending(nfc->dma_ecc_ch);
}
- stm32_fmc2_clear_seq_irq(fmc2);
- stm32_fmc2_enable_seq_irq(fmc2);
+ stm32_fmc2_nfc_clear_seq_irq(nfc);
+ stm32_fmc2_nfc_enable_seq_irq(nfc);
/* Start the transfer */
csqcr |= FMC2_CSQCR_CSQSTART;
- writel_relaxed(csqcr, fmc2->io_base + FMC2_CSQCR);
+ writel_relaxed(csqcr, nfc->io_base + FMC2_CSQCR);
/* Wait end of sequencer transfer */
- if (!wait_for_completion_timeout(&fmc2->complete,
- msecs_to_jiffies(FMC2_TIMEOUT_MS))) {
- dev_err(fmc2->dev, "seq timeout\n");
- stm32_fmc2_disable_seq_irq(fmc2);
+ if (!wait_for_completion_timeout(&nfc->complete, timeout)) {
+ dev_err(nfc->dev, "seq timeout\n");
+ stm32_fmc2_nfc_disable_seq_irq(nfc);
dmaengine_terminate_all(dma_ch);
if (!write_data && !raw)
- dmaengine_terminate_all(fmc2->dma_ecc_ch);
+ dmaengine_terminate_all(nfc->dma_ecc_ch);
ret = -ETIMEDOUT;
goto err_unmap_ecc;
}
/* Wait DMA data transfer completion */
- if (!wait_for_completion_timeout(&fmc2->dma_data_complete,
- msecs_to_jiffies(FMC2_TIMEOUT_MS))) {
- dev_err(fmc2->dev, "data DMA timeout\n");
+ if (!wait_for_completion_timeout(&nfc->dma_data_complete, timeout)) {
+ dev_err(nfc->dev, "data DMA timeout\n");
dmaengine_terminate_all(dma_ch);
ret = -ETIMEDOUT;
}
/* Wait DMA ECC transfer completion */
if (!write_data && !raw) {
- if (!wait_for_completion_timeout(&fmc2->dma_ecc_complete,
- msecs_to_jiffies(FMC2_TIMEOUT_MS))) {
- dev_err(fmc2->dev, "ECC DMA timeout\n");
- dmaengine_terminate_all(fmc2->dma_ecc_ch);
+ if (!wait_for_completion_timeout(&nfc->dma_ecc_complete,
+ timeout)) {
+ dev_err(nfc->dev, "ECC DMA timeout\n");
+ dmaengine_terminate_all(nfc->dma_ecc_ch);
ret = -ETIMEDOUT;
}
}
err_unmap_ecc:
if (!write_data && !raw)
- dma_unmap_sg(fmc2->dev, fmc2->dma_ecc_sg.sgl,
+ dma_unmap_sg(nfc->dev, nfc->dma_ecc_sg.sgl,
eccsteps, dma_data_dir);
err_unmap_data:
- dma_unmap_sg(fmc2->dev, fmc2->dma_data_sg.sgl, eccsteps, dma_data_dir);
+ dma_unmap_sg(nfc->dev, nfc->dma_data_sg.sgl, eccsteps, dma_data_dir);
return ret;
}
-static int stm32_fmc2_sequencer_write(struct nand_chip *chip,
- const u8 *buf, int oob_required,
- int page, int raw)
+static int stm32_fmc2_nfc_seq_write(struct nand_chip *chip, const u8 *buf,
+ int oob_required, int page, int raw)
{
struct mtd_info *mtd = nand_to_mtd(chip);
int ret;
/* Configure the sequencer */
- stm32_fmc2_rw_page_init(chip, page, raw, true);
+ stm32_fmc2_nfc_rw_page_init(chip, page, raw, true);
/* Write the page */
- ret = stm32_fmc2_xfer(chip, buf, raw, true);
+ ret = stm32_fmc2_nfc_xfer(chip, buf, raw, true);
if (ret)
return ret;
@@ -1025,53 +1023,50 @@ static int stm32_fmc2_sequencer_write(struct nand_chip *chip,
return nand_prog_page_end_op(chip);
}
-static int stm32_fmc2_sequencer_write_page(struct nand_chip *chip,
- const u8 *buf,
- int oob_required,
- int page)
+static int stm32_fmc2_nfc_seq_write_page(struct nand_chip *chip, const u8 *buf,
+ int oob_required, int page)
{
int ret;
- ret = stm32_fmc2_select_chip(chip, chip->cur_cs);
+ ret = stm32_fmc2_nfc_select_chip(chip, chip->cur_cs);
if (ret)
return ret;
- return stm32_fmc2_sequencer_write(chip, buf, oob_required, page, false);
+ return stm32_fmc2_nfc_seq_write(chip, buf, oob_required, page, false);
}
-static int stm32_fmc2_sequencer_write_page_raw(struct nand_chip *chip,
- const u8 *buf,
- int oob_required,
- int page)
+static int stm32_fmc2_nfc_seq_write_page_raw(struct nand_chip *chip,
+ const u8 *buf, int oob_required,
+ int page)
{
int ret;
- ret = stm32_fmc2_select_chip(chip, chip->cur_cs);
+ ret = stm32_fmc2_nfc_select_chip(chip, chip->cur_cs);
if (ret)
return ret;
- return stm32_fmc2_sequencer_write(chip, buf, oob_required, page, true);
+ return stm32_fmc2_nfc_seq_write(chip, buf, oob_required, page, true);
}
/* Get a status indicating which sectors have errors */
-static inline u16 stm32_fmc2_get_mapping_status(struct stm32_fmc2_nfc *fmc2)
+static inline u16 stm32_fmc2_nfc_get_mapping_status(struct stm32_fmc2_nfc *nfc)
{
- u32 csqemsr = readl_relaxed(fmc2->io_base + FMC2_CSQEMSR);
+ u32 csqemsr = readl_relaxed(nfc->io_base + FMC2_CSQEMSR);
return csqemsr & FMC2_CSQEMSR_SEM;
}
-static int stm32_fmc2_sequencer_correct(struct nand_chip *chip, u8 *dat,
- u8 *read_ecc, u8 *calc_ecc)
+static int stm32_fmc2_nfc_seq_correct(struct nand_chip *chip, u8 *dat,
+ u8 *read_ecc, u8 *calc_ecc)
{
struct mtd_info *mtd = nand_to_mtd(chip);
- struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
+ struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
int eccstrength = chip->ecc.strength;
int i, s, eccsize = chip->ecc.size;
- u32 *ecc_sta = (u32 *)fmc2->ecc_buf;
- u16 sta_map = stm32_fmc2_get_mapping_status(fmc2);
+ u32 *ecc_sta = (u32 *)nfc->ecc_buf;
+ u16 sta_map = stm32_fmc2_nfc_get_mapping_status(nfc);
unsigned int max_bitflips = 0;
for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, dat += eccsize) {
@@ -1080,10 +1075,11 @@ static int stm32_fmc2_sequencer_correct(struct nand_chip *chip, u8 *dat,
if (eccstrength == FMC2_ECC_HAM) {
/* Ecc_sta = FMC2_HECCR */
if (sta_map & BIT(s)) {
- stm32_fmc2_ham_set_ecc(*ecc_sta, &calc_ecc[i]);
- stat = stm32_fmc2_ham_correct(chip, dat,
- &read_ecc[i],
- &calc_ecc[i]);
+ stm32_fmc2_nfc_ham_set_ecc(*ecc_sta,
+ &calc_ecc[i]);
+ stat = stm32_fmc2_nfc_ham_correct(chip, dat,
+ &read_ecc[i],
+ &calc_ecc[i]);
}
ecc_sta++;
} else {
@@ -1095,8 +1091,8 @@ static int stm32_fmc2_sequencer_correct(struct nand_chip *chip, u8 *dat,
* Ecc_sta[4] = FMC2_BCHDSR4
*/
if (sta_map & BIT(s))
- stat = stm32_fmc2_bch_decode(eccsize, dat,
- ecc_sta);
+ stat = stm32_fmc2_nfc_bch_decode(eccsize, dat,
+ ecc_sta);
ecc_sta += 5;
}
@@ -1119,29 +1115,29 @@ static int stm32_fmc2_sequencer_correct(struct nand_chip *chip, u8 *dat,
return max_bitflips;
}
-static int stm32_fmc2_sequencer_read_page(struct nand_chip *chip, u8 *buf,
- int oob_required, int page)
+static int stm32_fmc2_nfc_seq_read_page(struct nand_chip *chip, u8 *buf,
+ int oob_required, int page)
{
struct mtd_info *mtd = nand_to_mtd(chip);
- struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
+ struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
u8 *ecc_calc = chip->ecc.calc_buf;
u8 *ecc_code = chip->ecc.code_buf;
u16 sta_map;
int ret;
- ret = stm32_fmc2_select_chip(chip, chip->cur_cs);
+ ret = stm32_fmc2_nfc_select_chip(chip, chip->cur_cs);
if (ret)
return ret;
/* Configure the sequencer */
- stm32_fmc2_rw_page_init(chip, page, 0, false);
+ stm32_fmc2_nfc_rw_page_init(chip, page, 0, false);
/* Read the page */
- ret = stm32_fmc2_xfer(chip, buf, 0, false);
+ ret = stm32_fmc2_nfc_xfer(chip, buf, 0, false);
if (ret)
return ret;
- sta_map = stm32_fmc2_get_mapping_status(fmc2);
+ sta_map = stm32_fmc2_nfc_get_mapping_status(nfc);
/* Check if errors happen */
if (likely(!sta_map)) {
@@ -1168,21 +1164,21 @@ static int stm32_fmc2_sequencer_read_page(struct nand_chip *chip, u8 *buf,
return chip->ecc.correct(chip, buf, ecc_code, ecc_calc);
}
-static int stm32_fmc2_sequencer_read_page_raw(struct nand_chip *chip, u8 *buf,
- int oob_required, int page)
+static int stm32_fmc2_nfc_seq_read_page_raw(struct nand_chip *chip, u8 *buf,
+ int oob_required, int page)
{
struct mtd_info *mtd = nand_to_mtd(chip);
int ret;
- ret = stm32_fmc2_select_chip(chip, chip->cur_cs);
+ ret = stm32_fmc2_nfc_select_chip(chip, chip->cur_cs);
if (ret)
return ret;
/* Configure the sequencer */
- stm32_fmc2_rw_page_init(chip, page, 1, false);
+ stm32_fmc2_nfc_rw_page_init(chip, page, 1, false);
/* Read the page */
- ret = stm32_fmc2_xfer(chip, buf, 1, false);
+ ret = stm32_fmc2_nfc_xfer(chip, buf, 1, false);
if (ret)
return ret;
@@ -1195,31 +1191,31 @@ static int stm32_fmc2_sequencer_read_page_raw(struct nand_chip *chip, u8 *buf,
return 0;
}
-static irqreturn_t stm32_fmc2_irq(int irq, void *dev_id)
+static irqreturn_t stm32_fmc2_nfc_irq(int irq, void *dev_id)
{
- struct stm32_fmc2_nfc *fmc2 = (struct stm32_fmc2_nfc *)dev_id;
+ struct stm32_fmc2_nfc *nfc = (struct stm32_fmc2_nfc *)dev_id;
- if (fmc2->irq_state == FMC2_IRQ_SEQ)
+ if (nfc->irq_state == FMC2_IRQ_SEQ)
/* Sequencer is used */
- stm32_fmc2_disable_seq_irq(fmc2);
- else if (fmc2->irq_state == FMC2_IRQ_BCH)
+ stm32_fmc2_nfc_disable_seq_irq(nfc);
+ else if (nfc->irq_state == FMC2_IRQ_BCH)
/* BCH is used */
- stm32_fmc2_disable_bch_irq(fmc2);
+ stm32_fmc2_nfc_disable_bch_irq(nfc);
- complete(&fmc2->complete);
+ complete(&nfc->complete);
return IRQ_HANDLED;
}
-static void stm32_fmc2_read_data(struct nand_chip *chip, void *buf,
- unsigned int len, bool force_8bit)
+static void stm32_fmc2_nfc_read_data(struct nand_chip *chip, void *buf,
+ unsigned int len, bool force_8bit)
{
- struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
- void __iomem *io_addr_r = fmc2->data_base[fmc2->cs_sel];
+ struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
+ void __iomem *io_addr_r = nfc->data_base[nfc->cs_sel];
if (force_8bit && chip->options & NAND_BUSWIDTH_16)
/* Reconfigure bus width to 8-bit */
- stm32_fmc2_set_buswidth_16(fmc2, false);
+ stm32_fmc2_nfc_set_buswidth_16(nfc, false);
if (!IS_ALIGNED((uintptr_t)buf, sizeof(u32))) {
if (!IS_ALIGNED((uintptr_t)buf, sizeof(u16)) && len) {
@@ -1255,18 +1251,18 @@ static void stm32_fmc2_read_data(struct nand_chip *chip, void *buf,
if (force_8bit && chip->options & NAND_BUSWIDTH_16)
/* Reconfigure bus width to 16-bit */
- stm32_fmc2_set_buswidth_16(fmc2, true);
+ stm32_fmc2_nfc_set_buswidth_16(nfc, true);
}
-static void stm32_fmc2_write_data(struct nand_chip *chip, const void *buf,
- unsigned int len, bool force_8bit)
+static void stm32_fmc2_nfc_write_data(struct nand_chip *chip, const void *buf,
+ unsigned int len, bool force_8bit)
{
- struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
- void __iomem *io_addr_w = fmc2->data_base[fmc2->cs_sel];
+ struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
+ void __iomem *io_addr_w = nfc->data_base[nfc->cs_sel];
if (force_8bit && chip->options & NAND_BUSWIDTH_16)
/* Reconfigure bus width to 8-bit */
- stm32_fmc2_set_buswidth_16(fmc2, false);
+ stm32_fmc2_nfc_set_buswidth_16(nfc, false);
if (!IS_ALIGNED((uintptr_t)buf, sizeof(u32))) {
if (!IS_ALIGNED((uintptr_t)buf, sizeof(u16)) && len) {
@@ -1302,44 +1298,45 @@ static void stm32_fmc2_write_data(struct nand_chip *chip, const void *buf,
if (force_8bit && chip->options & NAND_BUSWIDTH_16)
/* Reconfigure bus width to 16-bit */
- stm32_fmc2_set_buswidth_16(fmc2, true);
+ stm32_fmc2_nfc_set_buswidth_16(nfc, true);
}
-static int stm32_fmc2_waitrdy(struct nand_chip *chip, unsigned long timeout_ms)
+static int stm32_fmc2_nfc_waitrdy(struct nand_chip *chip,
+ unsigned long timeout_ms)
{
- struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
+ struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
const struct nand_sdr_timings *timings;
u32 isr, sr;
/* Check if there is no pending requests to the NAND flash */
- if (readl_relaxed_poll_timeout_atomic(fmc2->io_base + FMC2_SR, sr,
+ if (readl_relaxed_poll_timeout_atomic(nfc->io_base + FMC2_SR, sr,
sr & FMC2_SR_NWRF, 1,
1000 * FMC2_TIMEOUT_MS))
- dev_warn(fmc2->dev, "Waitrdy timeout\n");
+ dev_warn(nfc->dev, "Waitrdy timeout\n");
/* Wait tWB before R/B# signal is low */
timings = nand_get_sdr_timings(&chip->data_interface);
ndelay(PSEC_TO_NSEC(timings->tWB_max));
/* R/B# signal is low, clear high level flag */
- writel_relaxed(FMC2_ICR_CIHLF, fmc2->io_base + FMC2_ICR);
+ writel_relaxed(FMC2_ICR_CIHLF, nfc->io_base + FMC2_ICR);
/* Wait R/B# signal is high */
- return readl_relaxed_poll_timeout_atomic(fmc2->io_base + FMC2_ISR,
+ return readl_relaxed_poll_timeout_atomic(nfc->io_base + FMC2_ISR,
isr, isr & FMC2_ISR_IHLF,
5, 1000 * timeout_ms);
}
-static int stm32_fmc2_exec_op(struct nand_chip *chip,
- const struct nand_operation *op,
- bool check_only)
+static int stm32_fmc2_nfc_exec_op(struct nand_chip *chip,
+ const struct nand_operation *op,
+ bool check_only)
{
- struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
+ struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
const struct nand_op_instr *instr = NULL;
- unsigned int op_id, i;
+ unsigned int op_id, i, timeout;
int ret;
- ret = stm32_fmc2_select_chip(chip, op->cs);
+ ret = stm32_fmc2_nfc_select_chip(chip, op->cs);
if (ret)
return ret;
@@ -1352,30 +1349,30 @@ static int stm32_fmc2_exec_op(struct nand_chip *chip,
switch (instr->type) {
case NAND_OP_CMD_INSTR:
writeb_relaxed(instr->ctx.cmd.opcode,
- fmc2->cmd_base[fmc2->cs_sel]);
+ nfc->cmd_base[nfc->cs_sel]);
break;
case NAND_OP_ADDR_INSTR:
for (i = 0; i < instr->ctx.addr.naddrs; i++)
writeb_relaxed(instr->ctx.addr.addrs[i],
- fmc2->addr_base[fmc2->cs_sel]);
+ nfc->addr_base[nfc->cs_sel]);
break;
case NAND_OP_DATA_IN_INSTR:
- stm32_fmc2_read_data(chip, instr->ctx.data.buf.in,
- instr->ctx.data.len,
- instr->ctx.data.force_8bit);
+ stm32_fmc2_nfc_read_data(chip, instr->ctx.data.buf.in,
+ instr->ctx.data.len,
+ instr->ctx.data.force_8bit);
break;
case NAND_OP_DATA_OUT_INSTR:
- stm32_fmc2_write_data(chip, instr->ctx.data.buf.out,
- instr->ctx.data.len,
- instr->ctx.data.force_8bit);
+ stm32_fmc2_nfc_write_data(chip, instr->ctx.data.buf.out,
+ instr->ctx.data.len,
+ instr->ctx.data.force_8bit);
break;
case NAND_OP_WAITRDY_INSTR:
- ret = stm32_fmc2_waitrdy(chip,
- instr->ctx.waitrdy.timeout_ms);
+ timeout = instr->ctx.waitrdy.timeout_ms;
+ ret = stm32_fmc2_nfc_waitrdy(chip, timeout);
break;
}
}
@@ -1383,13 +1380,13 @@ static int stm32_fmc2_exec_op(struct nand_chip *chip,
return ret;
}
-static void stm32_fmc2_init(struct stm32_fmc2_nfc *fmc2)
+static void stm32_fmc2_nfc_init(struct stm32_fmc2_nfc *nfc)
{
- u32 pcr = readl_relaxed(fmc2->io_base + FMC2_PCR);
- u32 bcr1 = readl_relaxed(fmc2->io_base + FMC2_BCR1);
+ u32 pcr = readl_relaxed(nfc->io_base + FMC2_PCR);
+ u32 bcr1 = readl_relaxed(nfc->io_base + FMC2_BCR1);
/* Set CS used to undefined */
- fmc2->cs_sel = -1;
+ nfc->cs_sel = -1;
/* Enable wait feature and nand flash memory bank */
pcr |= FMC2_PCR_PWAITEN;
@@ -1419,19 +1416,19 @@ static void stm32_fmc2_init(struct stm32_fmc2_nfc *fmc2)
/* Enable FMC2 controller */
bcr1 |= FMC2_BCR1_FMC2EN;
- writel_relaxed(bcr1, fmc2->io_base + FMC2_BCR1);
- writel_relaxed(pcr, fmc2->io_base + FMC2_PCR);
- writel_relaxed(FMC2_PMEM_DEFAULT, fmc2->io_base + FMC2_PMEM);
- writel_relaxed(FMC2_PATT_DEFAULT, fmc2->io_base + FMC2_PATT);
+ writel_relaxed(bcr1, nfc->io_base + FMC2_BCR1);
+ writel_relaxed(pcr, nfc->io_base + FMC2_PCR);
+ writel_relaxed(FMC2_PMEM_DEFAULT, nfc->io_base + FMC2_PMEM);
+ writel_relaxed(FMC2_PATT_DEFAULT, nfc->io_base + FMC2_PATT);
}
-static void stm32_fmc2_calc_timings(struct nand_chip *chip,
- const struct nand_sdr_timings *sdrt)
+static void stm32_fmc2_nfc_calc_timings(struct nand_chip *chip,
+ const struct nand_sdr_timings *sdrt)
{
- struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
+ struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
struct stm32_fmc2_nand *nand = to_fmc2_nand(chip);
struct stm32_fmc2_timings *tims = &nand->timings;
- unsigned long hclk = clk_get_rate(fmc2->clk);
+ unsigned long hclk = clk_get_rate(nfc->clk);
unsigned long hclkp = NSEC_PER_SEC / (hclk / 1000);
unsigned long timing, tar, tclr, thiz, twait;
unsigned long tset_mem, tset_att, thold_mem, thold_att;
@@ -1555,8 +1552,8 @@ static void stm32_fmc2_calc_timings(struct nand_chip *chip,
tims->thold_att = clamp_val(timing, 1, FMC2_PMEM_PATT_TIMING_MASK);
}
-static int stm32_fmc2_setup_interface(struct nand_chip *chip, int chipnr,
- const struct nand_data_interface *conf)
+static int stm32_fmc2_nfc_setup_interface(struct nand_chip *chip, int chipnr,
+ const struct nand_data_interface *conf)
{
const struct nand_sdr_timings *sdrt;
@@ -1567,68 +1564,67 @@ static int stm32_fmc2_setup_interface(struct nand_chip *chip, int chipnr,
if (chipnr == NAND_DATA_IFACE_CHECK_ONLY)
return 0;
- stm32_fmc2_calc_timings(chip, sdrt);
- stm32_fmc2_timings_init(chip);
+ stm32_fmc2_nfc_calc_timings(chip, sdrt);
+ stm32_fmc2_nfc_timings_init(chip);
return 0;
}
-static int stm32_fmc2_dma_setup(struct stm32_fmc2_nfc *fmc2)
+static int stm32_fmc2_nfc_dma_setup(struct stm32_fmc2_nfc *nfc)
{
int ret = 0;
- fmc2->dma_tx_ch = dma_request_chan(fmc2->dev, "tx");
- if (IS_ERR(fmc2->dma_tx_ch)) {
- ret = PTR_ERR(fmc2->dma_tx_ch);
+ nfc->dma_tx_ch = dma_request_chan(nfc->dev, "tx");
+ if (IS_ERR(nfc->dma_tx_ch)) {
+ ret = PTR_ERR(nfc->dma_tx_ch);
if (ret != -ENODEV)
- dev_err(fmc2->dev,
+ dev_err(nfc->dev,
"failed to request tx DMA channel: %d\n", ret);
- fmc2->dma_tx_ch = NULL;
+ nfc->dma_tx_ch = NULL;
goto err_dma;
}
- fmc2->dma_rx_ch = dma_request_chan(fmc2->dev, "rx");
- if (IS_ERR(fmc2->dma_rx_ch)) {
- ret = PTR_ERR(fmc2->dma_rx_ch);
+ nfc->dma_rx_ch = dma_request_chan(nfc->dev, "rx");
+ if (IS_ERR(nfc->dma_rx_ch)) {
+ ret = PTR_ERR(nfc->dma_rx_ch);
if (ret != -ENODEV)
- dev_err(fmc2->dev,
+ dev_err(nfc->dev,
"failed to request rx DMA channel: %d\n", ret);
- fmc2->dma_rx_ch = NULL;
+ nfc->dma_rx_ch = NULL;
goto err_dma;
}
- fmc2->dma_ecc_ch = dma_request_chan(fmc2->dev, "ecc");
- if (IS_ERR(fmc2->dma_ecc_ch)) {
- ret = PTR_ERR(fmc2->dma_ecc_ch);
+ nfc->dma_ecc_ch = dma_request_chan(nfc->dev, "ecc");
+ if (IS_ERR(nfc->dma_ecc_ch)) {
+ ret = PTR_ERR(nfc->dma_ecc_ch);
if (ret != -ENODEV)
- dev_err(fmc2->dev,
+ dev_err(nfc->dev,
"failed to request ecc DMA channel: %d\n", ret);
- fmc2->dma_ecc_ch = NULL;
+ nfc->dma_ecc_ch = NULL;
goto err_dma;
}
- ret = sg_alloc_table(&fmc2->dma_ecc_sg, FMC2_MAX_SG, GFP_KERNEL);
+ ret = sg_alloc_table(&nfc->dma_ecc_sg, FMC2_MAX_SG, GFP_KERNEL);
if (ret)
return ret;
/* Allocate a buffer to store ECC status registers */
- fmc2->ecc_buf = devm_kzalloc(fmc2->dev, FMC2_MAX_ECC_BUF_LEN,
- GFP_KERNEL);
- if (!fmc2->ecc_buf)
+ nfc->ecc_buf = devm_kzalloc(nfc->dev, FMC2_MAX_ECC_BUF_LEN, GFP_KERNEL);
+ if (!nfc->ecc_buf)
return -ENOMEM;
- ret = sg_alloc_table(&fmc2->dma_data_sg, FMC2_MAX_SG, GFP_KERNEL);
+ ret = sg_alloc_table(&nfc->dma_data_sg, FMC2_MAX_SG, GFP_KERNEL);
if (ret)
return ret;
- init_completion(&fmc2->dma_data_complete);
- init_completion(&fmc2->dma_ecc_complete);
+ init_completion(&nfc->dma_data_complete);
+ init_completion(&nfc->dma_ecc_complete);
return 0;
err_dma:
if (ret == -ENODEV) {
- dev_warn(fmc2->dev,
+ dev_warn(nfc->dev,
"DMAs not defined in the DT, polling mode is used\n");
ret = 0;
}
@@ -1636,34 +1632,34 @@ static int stm32_fmc2_dma_setup(struct stm32_fmc2_nfc *fmc2)
return ret;
}
-static void stm32_fmc2_nand_callbacks_setup(struct nand_chip *chip)
+static void stm32_fmc2_nfc_nand_callbacks_setup(struct nand_chip *chip)
{
- struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
+ struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
/*
* Specific callbacks to read/write a page depending on
* the mode (polling/sequencer) and the algo used (Hamming, BCH).
*/
- if (fmc2->dma_tx_ch && fmc2->dma_rx_ch && fmc2->dma_ecc_ch) {
+ if (nfc->dma_tx_ch && nfc->dma_rx_ch && nfc->dma_ecc_ch) {
/* DMA => use sequencer mode callbacks */
- chip->ecc.correct = stm32_fmc2_sequencer_correct;
- chip->ecc.write_page = stm32_fmc2_sequencer_write_page;
- chip->ecc.read_page = stm32_fmc2_sequencer_read_page;
- chip->ecc.write_page_raw = stm32_fmc2_sequencer_write_page_raw;
- chip->ecc.read_page_raw = stm32_fmc2_sequencer_read_page_raw;
+ chip->ecc.correct = stm32_fmc2_nfc_seq_correct;
+ chip->ecc.write_page = stm32_fmc2_nfc_seq_write_page;
+ chip->ecc.read_page = stm32_fmc2_nfc_seq_read_page;
+ chip->ecc.write_page_raw = stm32_fmc2_nfc_seq_write_page_raw;
+ chip->ecc.read_page_raw = stm32_fmc2_nfc_seq_read_page_raw;
} else {
/* No DMA => use polling mode callbacks */
- chip->ecc.hwctl = stm32_fmc2_hwctl;
+ chip->ecc.hwctl = stm32_fmc2_nfc_hwctl;
if (chip->ecc.strength == FMC2_ECC_HAM) {
/* Hamming is used */
- chip->ecc.calculate = stm32_fmc2_ham_calculate;
- chip->ecc.correct = stm32_fmc2_ham_correct;
+ chip->ecc.calculate = stm32_fmc2_nfc_ham_calculate;
+ chip->ecc.correct = stm32_fmc2_nfc_ham_correct;
chip->ecc.options |= NAND_ECC_GENERIC_ERASED_CHECK;
} else {
/* BCH is used */
- chip->ecc.calculate = stm32_fmc2_bch_calculate;
- chip->ecc.correct = stm32_fmc2_bch_correct;
- chip->ecc.read_page = stm32_fmc2_read_page;
+ chip->ecc.calculate = stm32_fmc2_nfc_bch_calculate;
+ chip->ecc.correct = stm32_fmc2_nfc_bch_correct;
+ chip->ecc.read_page = stm32_fmc2_nfc_read_page;
}
}
@@ -1676,8 +1672,8 @@ static void stm32_fmc2_nand_callbacks_setup(struct nand_chip *chip)
chip->ecc.bytes = chip->options & NAND_BUSWIDTH_16 ? 8 : 7;
}
-static int stm32_fmc2_nand_ooblayout_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
+static int stm32_fmc2_nfc_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct nand_ecc_ctrl *ecc = &chip->ecc;
@@ -1691,8 +1687,8 @@ static int stm32_fmc2_nand_ooblayout_ecc(struct mtd_info *mtd, int section,
return 0;
}
-static int stm32_fmc2_nand_ooblayout_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
+static int stm32_fmc2_nfc_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct nand_ecc_ctrl *ecc = &chip->ecc;
@@ -1706,12 +1702,12 @@ static int stm32_fmc2_nand_ooblayout_free(struct mtd_info *mtd, int section,
return 0;
}
-static const struct mtd_ooblayout_ops stm32_fmc2_nand_ooblayout_ops = {
- .ecc = stm32_fmc2_nand_ooblayout_ecc,
- .free = stm32_fmc2_nand_ooblayout_free,
+static const struct mtd_ooblayout_ops stm32_fmc2_nfc_ooblayout_ops = {
+ .ecc = stm32_fmc2_nfc_ooblayout_ecc,
+ .free = stm32_fmc2_nfc_ooblayout_free,
};
-static int stm32_fmc2_calc_ecc_bytes(int step_size, int strength)
+static int stm32_fmc2_nfc_calc_ecc_bytes(int step_size, int strength)
{
/* Hamming */
if (strength == FMC2_ECC_HAM)
@@ -1725,13 +1721,13 @@ static int stm32_fmc2_calc_ecc_bytes(int step_size, int strength)
return 8;
}
-NAND_ECC_CAPS_SINGLE(stm32_fmc2_ecc_caps, stm32_fmc2_calc_ecc_bytes,
+NAND_ECC_CAPS_SINGLE(stm32_fmc2_nfc_ecc_caps, stm32_fmc2_nfc_calc_ecc_bytes,
FMC2_ECC_STEP_SIZE,
FMC2_ECC_HAM, FMC2_ECC_BCH4, FMC2_ECC_BCH8);
-static int stm32_fmc2_attach_chip(struct nand_chip *chip)
+static int stm32_fmc2_nfc_attach_chip(struct nand_chip *chip)
{
- struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
+ struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
struct mtd_info *mtd = nand_to_mtd(chip);
int ret;
@@ -1743,45 +1739,45 @@ static int stm32_fmc2_attach_chip(struct nand_chip *chip)
* ECC sector size = 512
*/
if (chip->ecc.mode != NAND_ECC_HW) {
- dev_err(fmc2->dev, "nand_ecc_mode is not well defined in the DT\n");
+ dev_err(nfc->dev, "nand_ecc_mode is not well defined in the DT\n");
return -EINVAL;
}
- ret = nand_ecc_choose_conf(chip, &stm32_fmc2_ecc_caps,
+ ret = nand_ecc_choose_conf(chip, &stm32_fmc2_nfc_ecc_caps,
mtd->oobsize - FMC2_BBM_LEN);
if (ret) {
- dev_err(fmc2->dev, "no valid ECC settings set\n");
+ dev_err(nfc->dev, "no valid ECC settings set\n");
return ret;
}
if (mtd->writesize / chip->ecc.size > FMC2_MAX_SG) {
- dev_err(fmc2->dev, "nand page size is not supported\n");
+ dev_err(nfc->dev, "nand page size is not supported\n");
return -EINVAL;
}
if (chip->bbt_options & NAND_BBT_USE_FLASH)
chip->bbt_options |= NAND_BBT_NO_OOB;
- stm32_fmc2_nand_callbacks_setup(chip);
+ stm32_fmc2_nfc_nand_callbacks_setup(chip);
- mtd_set_ooblayout(mtd, &stm32_fmc2_nand_ooblayout_ops);
+ mtd_set_ooblayout(mtd, &stm32_fmc2_nfc_ooblayout_ops);
if (chip->options & NAND_BUSWIDTH_16)
- stm32_fmc2_set_buswidth_16(fmc2, true);
+ stm32_fmc2_nfc_set_buswidth_16(nfc, true);
return 0;
}
-static const struct nand_controller_ops stm32_fmc2_nand_controller_ops = {
- .attach_chip = stm32_fmc2_attach_chip,
- .exec_op = stm32_fmc2_exec_op,
- .setup_data_interface = stm32_fmc2_setup_interface,
+static const struct nand_controller_ops stm32_fmc2_nfc_controller_ops = {
+ .attach_chip = stm32_fmc2_nfc_attach_chip,
+ .exec_op = stm32_fmc2_nfc_exec_op,
+ .setup_data_interface = stm32_fmc2_nfc_setup_interface,
};
-static int stm32_fmc2_parse_child(struct stm32_fmc2_nfc *fmc2,
- struct device_node *dn)
+static int stm32_fmc2_nfc_parse_child(struct stm32_fmc2_nfc *nfc,
+ struct device_node *dn)
{
- struct stm32_fmc2_nand *nand = &fmc2->nand;
+ struct stm32_fmc2_nand *nand = &nfc->nand;
u32 cs;
int ret, i;
@@ -1790,29 +1786,29 @@ static int stm32_fmc2_parse_child(struct stm32_fmc2_nfc *fmc2,
nand->ncs /= sizeof(u32);
if (!nand->ncs) {
- dev_err(fmc2->dev, "invalid reg property size\n");
+ dev_err(nfc->dev, "invalid reg property size\n");
return -EINVAL;
}
for (i = 0; i < nand->ncs; i++) {
ret = of_property_read_u32_index(dn, "reg", i, &cs);
if (ret) {
- dev_err(fmc2->dev, "could not retrieve reg property: %d\n",
+ dev_err(nfc->dev, "could not retrieve reg property: %d\n",
ret);
return ret;
}
if (cs > FMC2_MAX_CE) {
- dev_err(fmc2->dev, "invalid reg value: %d\n", cs);
+ dev_err(nfc->dev, "invalid reg value: %d\n", cs);
return -EINVAL;
}
- if (fmc2->cs_assigned & BIT(cs)) {
- dev_err(fmc2->dev, "cs already assigned: %d\n", cs);
+ if (nfc->cs_assigned & BIT(cs)) {
+ dev_err(nfc->dev, "cs already assigned: %d\n", cs);
return -EINVAL;
}
- fmc2->cs_assigned |= BIT(cs);
+ nfc->cs_assigned |= BIT(cs);
nand->cs_used[i] = cs;
}
@@ -1821,25 +1817,25 @@ static int stm32_fmc2_parse_child(struct stm32_fmc2_nfc *fmc2,
return 0;
}
-static int stm32_fmc2_parse_dt(struct stm32_fmc2_nfc *fmc2)
+static int stm32_fmc2_nfc_parse_dt(struct stm32_fmc2_nfc *nfc)
{
- struct device_node *dn = fmc2->dev->of_node;
+ struct device_node *dn = nfc->dev->of_node;
struct device_node *child;
int nchips = of_get_child_count(dn);
int ret = 0;
if (!nchips) {
- dev_err(fmc2->dev, "NAND chip not defined\n");
+ dev_err(nfc->dev, "NAND chip not defined\n");
return -EINVAL;
}
if (nchips > 1) {
- dev_err(fmc2->dev, "too many NAND chips defined\n");
+ dev_err(nfc->dev, "too many NAND chips defined\n");
return -EINVAL;
}
for_each_child_of_node(dn, child) {
- ret = stm32_fmc2_parse_child(fmc2, child);
+ ret = stm32_fmc2_nfc_parse_child(nfc, child);
if (ret < 0) {
of_node_put(child);
return ret;
@@ -1849,79 +1845,79 @@ static int stm32_fmc2_parse_dt(struct stm32_fmc2_nfc *fmc2)
return ret;
}
-static int stm32_fmc2_probe(struct platform_device *pdev)
+static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct reset_control *rstc;
- struct stm32_fmc2_nfc *fmc2;
+ struct stm32_fmc2_nfc *nfc;
struct stm32_fmc2_nand *nand;
struct resource *res;
struct mtd_info *mtd;
struct nand_chip *chip;
int chip_cs, mem_region, ret, irq;
- fmc2 = devm_kzalloc(dev, sizeof(*fmc2), GFP_KERNEL);
- if (!fmc2)
+ nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL);
+ if (!nfc)
return -ENOMEM;
- fmc2->dev = dev;
- nand_controller_init(&fmc2->base);
- fmc2->base.ops = &stm32_fmc2_nand_controller_ops;
+ nfc->dev = dev;
+ nand_controller_init(&nfc->base);
+ nfc->base.ops = &stm32_fmc2_nfc_controller_ops;
- ret = stm32_fmc2_parse_dt(fmc2);
+ ret = stm32_fmc2_nfc_parse_dt(nfc);
if (ret)
return ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- fmc2->io_base = devm_ioremap_resource(dev, res);
- if (IS_ERR(fmc2->io_base))
- return PTR_ERR(fmc2->io_base);
+ nfc->io_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(nfc->io_base))
+ return PTR_ERR(nfc->io_base);
- fmc2->io_phys_addr = res->start;
+ nfc->io_phys_addr = res->start;
for (chip_cs = 0, mem_region = 1; chip_cs < FMC2_MAX_CE;
chip_cs++, mem_region += 3) {
- if (!(fmc2->cs_assigned & BIT(chip_cs)))
+ if (!(nfc->cs_assigned & BIT(chip_cs)))
continue;
res = platform_get_resource(pdev, IORESOURCE_MEM, mem_region);
- fmc2->data_base[chip_cs] = devm_ioremap_resource(dev, res);
- if (IS_ERR(fmc2->data_base[chip_cs]))
- return PTR_ERR(fmc2->data_base[chip_cs]);
+ nfc->data_base[chip_cs] = devm_ioremap_resource(dev, res);
+ if (IS_ERR(nfc->data_base[chip_cs]))
+ return PTR_ERR(nfc->data_base[chip_cs]);
- fmc2->data_phys_addr[chip_cs] = res->start;
+ nfc->data_phys_addr[chip_cs] = res->start;
res = platform_get_resource(pdev, IORESOURCE_MEM,
mem_region + 1);
- fmc2->cmd_base[chip_cs] = devm_ioremap_resource(dev, res);
- if (IS_ERR(fmc2->cmd_base[chip_cs]))
- return PTR_ERR(fmc2->cmd_base[chip_cs]);
+ nfc->cmd_base[chip_cs] = devm_ioremap_resource(dev, res);
+ if (IS_ERR(nfc->cmd_base[chip_cs]))
+ return PTR_ERR(nfc->cmd_base[chip_cs]);
res = platform_get_resource(pdev, IORESOURCE_MEM,
mem_region + 2);
- fmc2->addr_base[chip_cs] = devm_ioremap_resource(dev, res);
- if (IS_ERR(fmc2->addr_base[chip_cs]))
- return PTR_ERR(fmc2->addr_base[chip_cs]);
+ nfc->addr_base[chip_cs] = devm_ioremap_resource(dev, res);
+ if (IS_ERR(nfc->addr_base[chip_cs]))
+ return PTR_ERR(nfc->addr_base[chip_cs]);
}
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
- ret = devm_request_irq(dev, irq, stm32_fmc2_irq, 0,
- dev_name(dev), fmc2);
+ ret = devm_request_irq(dev, irq, stm32_fmc2_nfc_irq, 0,
+ dev_name(dev), nfc);
if (ret) {
dev_err(dev, "failed to request irq\n");
return ret;
}
- init_completion(&fmc2->complete);
+ init_completion(&nfc->complete);
- fmc2->clk = devm_clk_get(dev, NULL);
- if (IS_ERR(fmc2->clk))
- return PTR_ERR(fmc2->clk);
+ nfc->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(nfc->clk))
+ return PTR_ERR(nfc->clk);
- ret = clk_prepare_enable(fmc2->clk);
+ ret = clk_prepare_enable(nfc->clk);
if (ret) {
dev_err(dev, "can not enable the clock\n");
return ret;
@@ -1937,18 +1933,18 @@ static int stm32_fmc2_probe(struct platform_device *pdev)
reset_control_deassert(rstc);
}
- ret = stm32_fmc2_dma_setup(fmc2);
+ ret = stm32_fmc2_nfc_dma_setup(nfc);
if (ret)
goto err_release_dma;
- stm32_fmc2_init(fmc2);
+ stm32_fmc2_nfc_init(nfc);
- nand = &fmc2->nand;
+ nand = &nfc->nand;
chip = &nand->chip;
mtd = nand_to_mtd(chip);
mtd->dev.parent = dev;
- chip->controller = &fmc2->base;
+ chip->controller = &nfc->base;
chip->options |= NAND_BUSWIDTH_AUTO | NAND_NO_SUBPAGE_WRITE |
NAND_USE_BOUNCE_BUFFER;
@@ -1966,7 +1962,7 @@ static int stm32_fmc2_probe(struct platform_device *pdev)
if (ret)
goto err_nand_cleanup;
- platform_set_drvdata(pdev, fmc2);
+ platform_set_drvdata(pdev, nfc);
return 0;
@@ -1974,73 +1970,73 @@ static int stm32_fmc2_probe(struct platform_device *pdev)
nand_cleanup(chip);
err_release_dma:
- if (fmc2->dma_ecc_ch)
- dma_release_channel(fmc2->dma_ecc_ch);
- if (fmc2->dma_tx_ch)
- dma_release_channel(fmc2->dma_tx_ch);
- if (fmc2->dma_rx_ch)
- dma_release_channel(fmc2->dma_rx_ch);
+ if (nfc->dma_ecc_ch)
+ dma_release_channel(nfc->dma_ecc_ch);
+ if (nfc->dma_tx_ch)
+ dma_release_channel(nfc->dma_tx_ch);
+ if (nfc->dma_rx_ch)
+ dma_release_channel(nfc->dma_rx_ch);
- sg_free_table(&fmc2->dma_data_sg);
- sg_free_table(&fmc2->dma_ecc_sg);
+ sg_free_table(&nfc->dma_data_sg);
+ sg_free_table(&nfc->dma_ecc_sg);
err_clk_disable:
- clk_disable_unprepare(fmc2->clk);
+ clk_disable_unprepare(nfc->clk);
return ret;
}
-static int stm32_fmc2_remove(struct platform_device *pdev)
+static int stm32_fmc2_nfc_remove(struct platform_device *pdev)
{
- struct stm32_fmc2_nfc *fmc2 = platform_get_drvdata(pdev);
- struct stm32_fmc2_nand *nand = &fmc2->nand;
+ struct stm32_fmc2_nfc *nfc = platform_get_drvdata(pdev);
+ struct stm32_fmc2_nand *nand = &nfc->nand;
nand_release(&nand->chip);
- if (fmc2->dma_ecc_ch)
- dma_release_channel(fmc2->dma_ecc_ch);
- if (fmc2->dma_tx_ch)
- dma_release_channel(fmc2->dma_tx_ch);
- if (fmc2->dma_rx_ch)
- dma_release_channel(fmc2->dma_rx_ch);
+ if (nfc->dma_ecc_ch)
+ dma_release_channel(nfc->dma_ecc_ch);
+ if (nfc->dma_tx_ch)
+ dma_release_channel(nfc->dma_tx_ch);
+ if (nfc->dma_rx_ch)
+ dma_release_channel(nfc->dma_rx_ch);
- sg_free_table(&fmc2->dma_data_sg);
- sg_free_table(&fmc2->dma_ecc_sg);
+ sg_free_table(&nfc->dma_data_sg);
+ sg_free_table(&nfc->dma_ecc_sg);
- clk_disable_unprepare(fmc2->clk);
+ clk_disable_unprepare(nfc->clk);
return 0;
}
-static int __maybe_unused stm32_fmc2_suspend(struct device *dev)
+static int __maybe_unused stm32_fmc2_nfc_suspend(struct device *dev)
{
- struct stm32_fmc2_nfc *fmc2 = dev_get_drvdata(dev);
+ struct stm32_fmc2_nfc *nfc = dev_get_drvdata(dev);
- clk_disable_unprepare(fmc2->clk);
+ clk_disable_unprepare(nfc->clk);
pinctrl_pm_select_sleep_state(dev);
return 0;
}
-static int __maybe_unused stm32_fmc2_resume(struct device *dev)
+static int __maybe_unused stm32_fmc2_nfc_resume(struct device *dev)
{
- struct stm32_fmc2_nfc *fmc2 = dev_get_drvdata(dev);
- struct stm32_fmc2_nand *nand = &fmc2->nand;
+ struct stm32_fmc2_nfc *nfc = dev_get_drvdata(dev);
+ struct stm32_fmc2_nand *nand = &nfc->nand;
int chip_cs, ret;
pinctrl_pm_select_default_state(dev);
- ret = clk_prepare_enable(fmc2->clk);
+ ret = clk_prepare_enable(nfc->clk);
if (ret) {
dev_err(dev, "can not enable the clock\n");
return ret;
}
- stm32_fmc2_init(fmc2);
+ stm32_fmc2_nfc_init(nfc);
for (chip_cs = 0; chip_cs < FMC2_MAX_CE; chip_cs++) {
- if (!(fmc2->cs_assigned & BIT(chip_cs)))
+ if (!(nfc->cs_assigned & BIT(chip_cs)))
continue;
nand_reset(&nand->chip, chip_cs);
@@ -2049,27 +2045,27 @@ static int __maybe_unused stm32_fmc2_resume(struct device *dev)
return 0;
}
-static SIMPLE_DEV_PM_OPS(stm32_fmc2_pm_ops, stm32_fmc2_suspend,
- stm32_fmc2_resume);
+static SIMPLE_DEV_PM_OPS(stm32_fmc2_nfc_pm_ops, stm32_fmc2_nfc_suspend,
+ stm32_fmc2_nfc_resume);
-static const struct of_device_id stm32_fmc2_match[] = {
+static const struct of_device_id stm32_fmc2_nfc_match[] = {
{.compatible = "st,stm32mp15-fmc2"},
{}
};
-MODULE_DEVICE_TABLE(of, stm32_fmc2_match);
+MODULE_DEVICE_TABLE(of, stm32_fmc2_nfc_match);
-static struct platform_driver stm32_fmc2_driver = {
- .probe = stm32_fmc2_probe,
- .remove = stm32_fmc2_remove,
+static struct platform_driver stm32_fmc2_nfc_driver = {
+ .probe = stm32_fmc2_nfc_probe,
+ .remove = stm32_fmc2_nfc_remove,
.driver = {
- .name = "stm32_fmc2_nand",
- .of_match_table = stm32_fmc2_match,
- .pm = &stm32_fmc2_pm_ops,
+ .name = "stm32_fmc2_nfc",
+ .of_match_table = stm32_fmc2_nfc_match,
+ .pm = &stm32_fmc2_nfc_pm_ops,
},
};
-module_platform_driver(stm32_fmc2_driver);
+module_platform_driver(stm32_fmc2_nfc_driver);
-MODULE_ALIAS("platform:stm32_fmc2_nand");
+MODULE_ALIAS("platform:stm32_fmc2_nfc");
MODULE_AUTHOR("Christophe Kerello <[email protected]>");
-MODULE_DESCRIPTION("STMicroelectronics STM32 FMC2 nand driver");
+MODULE_DESCRIPTION("STMicroelectronics STM32 FMC2 NFC driver");
MODULE_LICENSE("GPL v2");
--
1.9.1
FMC2 EBI support has been added. Common resources (registers base
and clock) are now shared between the 2 drivers. It means that the
common resources should now be found in the parent device when EBI
node is available.
Signed-off-by: Christophe Kerello <[email protected]>
---
drivers/mtd/nand/raw/Kconfig | 3 +-
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 89 +++++++++++++++++++++++-----------
2 files changed, 62 insertions(+), 30 deletions(-)
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 12b715a..28dccd5 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -419,8 +419,7 @@ config MTD_NAND_TEGRA
config MTD_NAND_STM32_FMC2
tristate "Support for NAND controller on STM32MP SoCs"
depends on MACH_STM32MP157 || COMPILE_TEST
- select REGMAP
- select REGMAP_MMIO
+ select MFD_SYSCON
help
Enables support for NAND Flash chips on SoCs containing the FMC2
NAND controller. This controller is found on STM32MP SoCs.
diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 76571da..dfab6b1 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -11,8 +11,10 @@
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/mtd/rawnand.h>
+#include <linux/of_address.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
@@ -204,16 +206,6 @@
#define FMC2_BCHDSR4_EBP7 GENMASK(12, 0)
#define FMC2_BCHDSR4_EBP8 GENMASK(28, 16)
-/* Regmap registers configuration */
-#define FMC2_MAX_REGISTER 0x3fc
-
-static const struct regmap_config stm32_fmc2_regmap_cfg = {
- .reg_bits = 32,
- .val_bits = 32,
- .reg_stride = sizeof(u32),
- .max_register = FMC2_MAX_REGISTER,
-};
-
enum stm32_fmc2_ecc {
FMC2_ECC_HAM = 1,
FMC2_ECC_BCH4 = 4,
@@ -261,6 +253,7 @@ struct stm32_fmc2_nfc {
phys_addr_t data_phys_addr[FMC2_MAX_CE];
struct clk *clk;
u8 irq_state;
+ bool has_parent;
struct dma_chan *dma_tx_ch;
struct dma_chan *dma_rx_ch;
@@ -1384,8 +1377,9 @@ static void stm32_fmc2_nfc_init(struct stm32_fmc2_nfc *nfc)
pcr |= FIELD_PREP(FMC2_PCR_TAR, FMC2_PCR_TAR_DEFAULT);
/* Enable FMC2 controller */
- regmap_update_bits(nfc->regmap, FMC2_BCR1,
- FMC2_BCR1_FMC2EN, FMC2_BCR1_FMC2EN);
+ if (!nfc->has_parent)
+ regmap_update_bits(nfc->regmap, FMC2_BCR1,
+ FMC2_BCR1_FMC2EN, FMC2_BCR1_FMC2EN);
regmap_write(nfc->regmap, FMC2_PCR, pcr);
regmap_write(nfc->regmap, FMC2_PMEM, FMC2_PMEM_DEFAULT);
@@ -1815,6 +1809,53 @@ static int stm32_fmc2_nfc_parse_dt(struct stm32_fmc2_nfc *nfc)
return ret;
}
+static int stm32_fmc2_nfc_set_regmap_clk(struct platform_device *pdev,
+ struct stm32_fmc2_nfc *nfc)
+{
+ struct device *dev = &pdev->dev;
+ struct resource res;
+ int ret;
+
+ if (nfc->has_parent)
+ dev = dev->parent;
+
+ ret = of_address_to_resource(dev->of_node, 0, &res);
+ if (ret)
+ return ret;
+
+ nfc->io_phys_addr = res.start;
+
+ nfc->regmap = device_node_to_regmap(dev->of_node);
+ if (IS_ERR(nfc->regmap))
+ return PTR_ERR(nfc->regmap);
+
+ nfc->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(nfc->clk))
+ return PTR_ERR(nfc->clk);
+
+ return 0;
+}
+
+static bool stm32_fmc2_nfc_check_for_parent(struct platform_device *pdev)
+{
+ u32 i;
+ int nb_resources = 0;
+
+ /* Count the number of resources in reg property */
+ for (i = 0; i < pdev->num_resources; i++) {
+ struct resource *res = &pdev->resource[i];
+
+ if (resource_type(res) == IORESOURCE_MEM)
+ nb_resources++;
+ }
+
+ /* Each CS needs 3 resources defined (data, cmd and addr) */
+ if (nb_resources % 3)
+ return false;
+
+ return true;
+}
+
static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1824,8 +1865,8 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
struct resource *res;
struct mtd_info *mtd;
struct nand_chip *chip;
- void __iomem *mmio;
int chip_cs, mem_region, ret, irq;
+ int num_region = 1;
nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL);
if (!nfc)
@@ -1834,23 +1875,19 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
nfc->dev = dev;
nand_controller_init(&nfc->base);
nfc->base.ops = &stm32_fmc2_nfc_controller_ops;
+ nfc->has_parent = stm32_fmc2_nfc_check_for_parent(pdev);
+ if (nfc->has_parent)
+ num_region = 0;
ret = stm32_fmc2_nfc_parse_dt(nfc);
if (ret)
return ret;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- mmio = devm_ioremap_resource(dev, res);
- if (IS_ERR(mmio))
- return PTR_ERR(mmio);
-
- nfc->regmap = devm_regmap_init_mmio(dev, mmio, &stm32_fmc2_regmap_cfg);
- if (IS_ERR(nfc->regmap))
- return PTR_ERR(nfc->regmap);
-
- nfc->io_phys_addr = res->start;
+ ret = stm32_fmc2_nfc_set_regmap_clk(pdev, nfc);
+ if (ret)
+ return ret;
- for (chip_cs = 0, mem_region = 1; chip_cs < FMC2_MAX_CE;
+ for (chip_cs = 0, mem_region = num_region; chip_cs < FMC2_MAX_CE;
chip_cs++, mem_region += 3) {
if (!(nfc->cs_assigned & BIT(chip_cs)))
continue;
@@ -1888,10 +1925,6 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
init_completion(&nfc->complete);
- nfc->clk = devm_clk_get(dev, NULL);
- if (IS_ERR(nfc->clk))
- return PTR_ERR(nfc->clk);
-
ret = clk_prepare_enable(nfc->clk);
if (ret) {
dev_err(dev, "can not enable the clock\n");
--
1.9.1
This patch uses regmap APIs to access all FMC2 registers.
Signed-off-by: Christophe Kerello <[email protected]>
Reviewed-by: Miquel Raynal <[email protected]>
---
Changes in v3:
- add Miquel reviewed-by tag
drivers/mtd/nand/raw/Kconfig | 2 +
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 268 +++++++++++++++------------------
2 files changed, 127 insertions(+), 143 deletions(-)
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index a80a46b..12b715a 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -419,6 +419,8 @@ config MTD_NAND_TEGRA
config MTD_NAND_STM32_FMC2
tristate "Support for NAND controller on STM32MP SoCs"
depends on MACH_STM32MP157 || COMPILE_TEST
+ select REGMAP
+ select REGMAP_MMIO
help
Enables support for NAND Flash chips on SoCs containing the FMC2
NAND controller. This controller is found on STM32MP SoCs.
diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 236bb41..76571da 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -15,6 +15,7 @@
#include <linux/mtd/rawnand.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
+#include <linux/regmap.h>
#include <linux/reset.h>
/* Bad block marker length */
@@ -203,6 +204,16 @@
#define FMC2_BCHDSR4_EBP7 GENMASK(12, 0)
#define FMC2_BCHDSR4_EBP8 GENMASK(28, 16)
+/* Regmap registers configuration */
+#define FMC2_MAX_REGISTER 0x3fc
+
+static const struct regmap_config stm32_fmc2_regmap_cfg = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = sizeof(u32),
+ .max_register = FMC2_MAX_REGISTER,
+};
+
enum stm32_fmc2_ecc {
FMC2_ECC_HAM = 1,
FMC2_ECC_BCH4 = 4,
@@ -242,7 +253,7 @@ struct stm32_fmc2_nfc {
struct nand_controller base;
struct stm32_fmc2_nand nand;
struct device *dev;
- void __iomem *io_base;
+ struct regmap *regmap;
void __iomem *data_base[FMC2_MAX_CE];
void __iomem *cmd_base[FMC2_MAX_CE];
void __iomem *addr_base[FMC2_MAX_CE];
@@ -277,40 +288,37 @@ static void stm32_fmc2_nfc_timings_init(struct nand_chip *chip)
struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
struct stm32_fmc2_nand *nand = to_fmc2_nand(chip);
struct stm32_fmc2_timings *timings = &nand->timings;
- u32 pcr = readl_relaxed(nfc->io_base + FMC2_PCR);
u32 pmem, patt;
/* Set tclr/tar timings */
- pcr &= ~FMC2_PCR_TCLR;
- pcr |= FIELD_PREP(FMC2_PCR_TCLR, timings->tclr);
- pcr &= ~FMC2_PCR_TAR;
- pcr |= FIELD_PREP(FMC2_PCR_TAR, timings->tar);
+ regmap_update_bits(nfc->regmap, FMC2_PCR,
+ FMC2_PCR_TCLR | FMC2_PCR_TAR,
+ FIELD_PREP(FMC2_PCR_TCLR, timings->tclr) |
+ FIELD_PREP(FMC2_PCR_TAR, timings->tar));
/* Set tset/twait/thold/thiz timings in common bank */
pmem = FIELD_PREP(FMC2_PMEM_MEMSET, timings->tset_mem);
pmem |= FIELD_PREP(FMC2_PMEM_MEMWAIT, timings->twait);
pmem |= FIELD_PREP(FMC2_PMEM_MEMHOLD, timings->thold_mem);
pmem |= FIELD_PREP(FMC2_PMEM_MEMHIZ, timings->thiz);
+ regmap_write(nfc->regmap, FMC2_PMEM, pmem);
/* Set tset/twait/thold/thiz timings in attribut bank */
patt = FIELD_PREP(FMC2_PATT_ATTSET, timings->tset_att);
patt |= FIELD_PREP(FMC2_PATT_ATTWAIT, timings->twait);
patt |= FIELD_PREP(FMC2_PATT_ATTHOLD, timings->thold_att);
patt |= FIELD_PREP(FMC2_PATT_ATTHIZ, timings->thiz);
-
- writel_relaxed(pcr, nfc->io_base + FMC2_PCR);
- writel_relaxed(pmem, nfc->io_base + FMC2_PMEM);
- writel_relaxed(patt, nfc->io_base + FMC2_PATT);
+ regmap_write(nfc->regmap, FMC2_PATT, patt);
}
static void stm32_fmc2_nfc_setup(struct nand_chip *chip)
{
struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
- u32 pcr = readl_relaxed(nfc->io_base + FMC2_PCR);
+ u32 pcr = 0, pcr_mask;
/* Configure ECC algorithm (default configuration is Hamming) */
- pcr &= ~FMC2_PCR_ECCALG;
- pcr &= ~FMC2_PCR_BCHECC;
+ pcr_mask = FMC2_PCR_ECCALG;
+ pcr_mask |= FMC2_PCR_BCHECC;
if (chip->ecc.strength == FMC2_ECC_BCH8) {
pcr |= FMC2_PCR_ECCALG;
pcr |= FMC2_PCR_BCHECC;
@@ -319,15 +327,15 @@ static void stm32_fmc2_nfc_setup(struct nand_chip *chip)
}
/* Set buswidth */
- pcr &= ~FMC2_PCR_PWID;
+ pcr_mask |= FMC2_PCR_PWID;
if (chip->options & NAND_BUSWIDTH_16)
pcr |= FIELD_PREP(FMC2_PCR_PWID, FMC2_PCR_PWID_BUSWIDTH_16);
/* Set ECC sector size */
- pcr &= ~FMC2_PCR_ECCSS;
+ pcr_mask |= FMC2_PCR_ECCSS;
pcr |= FIELD_PREP(FMC2_PCR_ECCSS, FMC2_PCR_ECCSS_512);
- writel_relaxed(pcr, nfc->io_base + FMC2_PCR);
+ regmap_update_bits(nfc->regmap, FMC2_PCR, pcr_mask, pcr);
}
static int stm32_fmc2_nfc_select_chip(struct nand_chip *chip, int chipnr)
@@ -393,81 +401,63 @@ static int stm32_fmc2_nfc_select_chip(struct nand_chip *chip, int chipnr)
static void stm32_fmc2_nfc_set_buswidth_16(struct stm32_fmc2_nfc *nfc, bool set)
{
- u32 pcr = readl_relaxed(nfc->io_base + FMC2_PCR);
+ u32 pcr;
- pcr &= ~FMC2_PCR_PWID;
- if (set)
- pcr |= FIELD_PREP(FMC2_PCR_PWID, FMC2_PCR_PWID_BUSWIDTH_16);
- writel_relaxed(pcr, nfc->io_base + FMC2_PCR);
+ pcr = set ? FIELD_PREP(FMC2_PCR_PWID, FMC2_PCR_PWID_BUSWIDTH_16) :
+ FIELD_PREP(FMC2_PCR_PWID, FMC2_PCR_PWID_BUSWIDTH_8);
+
+ regmap_update_bits(nfc->regmap, FMC2_PCR, FMC2_PCR_PWID, pcr);
}
static void stm32_fmc2_nfc_set_ecc(struct stm32_fmc2_nfc *nfc, bool enable)
{
- u32 pcr = readl(nfc->io_base + FMC2_PCR);
-
- pcr &= ~FMC2_PCR_ECCEN;
- if (enable)
- pcr |= FMC2_PCR_ECCEN;
- writel(pcr, nfc->io_base + FMC2_PCR);
+ regmap_update_bits(nfc->regmap, FMC2_PCR, FMC2_PCR_ECCEN,
+ enable ? FMC2_PCR_ECCEN : 0);
}
-static inline void stm32_fmc2_nfc_enable_seq_irq(struct stm32_fmc2_nfc *nfc)
+static void stm32_fmc2_nfc_enable_seq_irq(struct stm32_fmc2_nfc *nfc)
{
- u32 csqier = readl_relaxed(nfc->io_base + FMC2_CSQIER);
-
- csqier |= FMC2_CSQIER_TCIE;
-
nfc->irq_state = FMC2_IRQ_SEQ;
- writel_relaxed(csqier, nfc->io_base + FMC2_CSQIER);
+ regmap_update_bits(nfc->regmap, FMC2_CSQIER,
+ FMC2_CSQIER_TCIE, FMC2_CSQIER_TCIE);
}
-static inline void stm32_fmc2_nfc_disable_seq_irq(struct stm32_fmc2_nfc *nfc)
+static void stm32_fmc2_nfc_disable_seq_irq(struct stm32_fmc2_nfc *nfc)
{
- u32 csqier = readl_relaxed(nfc->io_base + FMC2_CSQIER);
-
- csqier &= ~FMC2_CSQIER_TCIE;
-
- writel_relaxed(csqier, nfc->io_base + FMC2_CSQIER);
+ regmap_update_bits(nfc->regmap, FMC2_CSQIER, FMC2_CSQIER_TCIE, 0);
nfc->irq_state = FMC2_IRQ_UNKNOWN;
}
-static inline void stm32_fmc2_nfc_clear_seq_irq(struct stm32_fmc2_nfc *nfc)
+static void stm32_fmc2_nfc_clear_seq_irq(struct stm32_fmc2_nfc *nfc)
{
- writel_relaxed(FMC2_CSQICR_CLEAR_IRQ, nfc->io_base + FMC2_CSQICR);
+ regmap_write(nfc->regmap, FMC2_CSQICR, FMC2_CSQICR_CLEAR_IRQ);
}
-static inline void stm32_fmc2_nfc_enable_bch_irq(struct stm32_fmc2_nfc *nfc,
- int mode)
+static void stm32_fmc2_nfc_enable_bch_irq(struct stm32_fmc2_nfc *nfc, int mode)
{
- u32 bchier = readl_relaxed(nfc->io_base + FMC2_BCHIER);
+ nfc->irq_state = FMC2_IRQ_BCH;
if (mode == NAND_ECC_WRITE)
- bchier |= FMC2_BCHIER_EPBRIE;
+ regmap_update_bits(nfc->regmap, FMC2_BCHIER,
+ FMC2_BCHIER_EPBRIE, FMC2_BCHIER_EPBRIE);
else
- bchier |= FMC2_BCHIER_DERIE;
-
- nfc->irq_state = FMC2_IRQ_BCH;
-
- writel_relaxed(bchier, nfc->io_base + FMC2_BCHIER);
+ regmap_update_bits(nfc->regmap, FMC2_BCHIER,
+ FMC2_BCHIER_DERIE, FMC2_BCHIER_DERIE);
}
-static inline void stm32_fmc2_nfc_disable_bch_irq(struct stm32_fmc2_nfc *nfc)
+static void stm32_fmc2_nfc_disable_bch_irq(struct stm32_fmc2_nfc *nfc)
{
- u32 bchier = readl_relaxed(nfc->io_base + FMC2_BCHIER);
-
- bchier &= ~FMC2_BCHIER_DERIE;
- bchier &= ~FMC2_BCHIER_EPBRIE;
-
- writel_relaxed(bchier, nfc->io_base + FMC2_BCHIER);
+ regmap_update_bits(nfc->regmap, FMC2_BCHIER,
+ FMC2_BCHIER_DERIE | FMC2_BCHIER_EPBRIE, 0);
nfc->irq_state = FMC2_IRQ_UNKNOWN;
}
-static inline void stm32_fmc2_nfc_clear_bch_irq(struct stm32_fmc2_nfc *nfc)
+static void stm32_fmc2_nfc_clear_bch_irq(struct stm32_fmc2_nfc *nfc)
{
- writel_relaxed(FMC2_BCHICR_CLEAR_IRQ, nfc->io_base + FMC2_BCHICR);
+ regmap_write(nfc->regmap, FMC2_BCHICR, FMC2_BCHICR_CLEAR_IRQ);
}
/*
@@ -481,13 +471,8 @@ static void stm32_fmc2_nfc_hwctl(struct nand_chip *chip, int mode)
stm32_fmc2_nfc_set_ecc(nfc, false);
if (chip->ecc.strength != FMC2_ECC_HAM) {
- u32 pcr = readl_relaxed(nfc->io_base + FMC2_PCR);
-
- if (mode == NAND_ECC_WRITE)
- pcr |= FMC2_PCR_WEN;
- else
- pcr &= ~FMC2_PCR_WEN;
- writel_relaxed(pcr, nfc->io_base + FMC2_PCR);
+ regmap_update_bits(nfc->regmap, FMC2_PCR, FMC2_PCR_WEN,
+ mode == NAND_ECC_WRITE ? FMC2_PCR_WEN : 0);
reinit_completion(&nfc->complete);
stm32_fmc2_nfc_clear_bch_irq(nfc);
@@ -502,7 +487,7 @@ static void stm32_fmc2_nfc_hwctl(struct nand_chip *chip, int mode)
* ECC is 3 bytes for 512 bytes of data (supports error correction up to
* max of 1-bit)
*/
-static inline void stm32_fmc2_nfc_ham_set_ecc(const u32 ecc_sta, u8 *ecc)
+static void stm32_fmc2_nfc_ham_set_ecc(const u32 ecc_sta, u8 *ecc)
{
ecc[0] = ecc_sta;
ecc[1] = ecc_sta >> 8;
@@ -516,15 +501,15 @@ static int stm32_fmc2_nfc_ham_calculate(struct nand_chip *chip, const u8 *data,
u32 sr, heccr;
int ret;
- ret = readl_relaxed_poll_timeout(nfc->io_base + FMC2_SR,
- sr, sr & FMC2_SR_NWRF, 1,
- 1000 * FMC2_TIMEOUT_MS);
+ ret = regmap_read_poll_timeout(nfc->regmap, FMC2_SR, sr,
+ sr & FMC2_SR_NWRF, 1,
+ 1000 * FMC2_TIMEOUT_MS);
if (ret) {
dev_err(nfc->dev, "ham timeout\n");
return ret;
}
- heccr = readl_relaxed(nfc->io_base + FMC2_HECCR);
+ regmap_read(nfc->regmap, FMC2_HECCR, &heccr);
stm32_fmc2_nfc_ham_set_ecc(heccr, ecc);
stm32_fmc2_nfc_set_ecc(nfc, false);
@@ -603,13 +588,13 @@ static int stm32_fmc2_nfc_bch_calculate(struct nand_chip *chip, const u8 *data,
}
/* Read parity bits */
- bchpbr = readl_relaxed(nfc->io_base + FMC2_BCHPBR1);
+ regmap_read(nfc->regmap, FMC2_BCHPBR1, &bchpbr);
ecc[0] = bchpbr;
ecc[1] = bchpbr >> 8;
ecc[2] = bchpbr >> 16;
ecc[3] = bchpbr >> 24;
- bchpbr = readl_relaxed(nfc->io_base + FMC2_BCHPBR2);
+ regmap_read(nfc->regmap, FMC2_BCHPBR2, &bchpbr);
ecc[4] = bchpbr;
ecc[5] = bchpbr >> 8;
ecc[6] = bchpbr >> 16;
@@ -617,13 +602,13 @@ static int stm32_fmc2_nfc_bch_calculate(struct nand_chip *chip, const u8 *data,
if (chip->ecc.strength == FMC2_ECC_BCH8) {
ecc[7] = bchpbr >> 24;
- bchpbr = readl_relaxed(nfc->io_base + FMC2_BCHPBR3);
+ regmap_read(nfc->regmap, FMC2_BCHPBR3, &bchpbr);
ecc[8] = bchpbr;
ecc[9] = bchpbr >> 8;
ecc[10] = bchpbr >> 16;
ecc[11] = bchpbr >> 24;
- bchpbr = readl_relaxed(nfc->io_base + FMC2_BCHPBR4);
+ regmap_read(nfc->regmap, FMC2_BCHPBR4, &bchpbr);
ecc[12] = bchpbr;
}
@@ -685,11 +670,7 @@ static int stm32_fmc2_nfc_bch_correct(struct nand_chip *chip, u8 *dat,
return -ETIMEDOUT;
}
- ecc_sta[0] = readl_relaxed(nfc->io_base + FMC2_BCHDSR0);
- ecc_sta[1] = readl_relaxed(nfc->io_base + FMC2_BCHDSR1);
- ecc_sta[2] = readl_relaxed(nfc->io_base + FMC2_BCHDSR2);
- ecc_sta[3] = readl_relaxed(nfc->io_base + FMC2_BCHDSR3);
- ecc_sta[4] = readl_relaxed(nfc->io_base + FMC2_BCHDSR4);
+ regmap_bulk_read(nfc->regmap, FMC2_BCHDSR0, ecc_sta, 5);
stm32_fmc2_nfc_set_ecc(nfc, false);
@@ -764,30 +745,29 @@ static void stm32_fmc2_nfc_rw_page_init(struct nand_chip *chip, int page,
{
struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
struct mtd_info *mtd = nand_to_mtd(chip);
- u32 csqcfgr1, csqcfgr2, csqcfgr3;
- u32 csqar1, csqar2;
u32 ecc_offset = mtd->writesize + FMC2_BBM_LEN;
- u32 pcr = readl_relaxed(nfc->io_base + FMC2_PCR);
+ /*
+ * cfg[0] => csqcfgr1, cfg[1] => csqcfgr2, cfg[2] => csqcfgr3
+ * cfg[3] => csqar1, cfg[4] => csqar2
+ */
+ u32 cfg[5];
- if (write_data)
- pcr |= FMC2_PCR_WEN;
- else
- pcr &= ~FMC2_PCR_WEN;
- writel_relaxed(pcr, nfc->io_base + FMC2_PCR);
+ regmap_update_bits(nfc->regmap, FMC2_PCR, FMC2_PCR_WEN,
+ write_data ? FMC2_PCR_WEN : 0);
/*
* - Set Program Page/Page Read command
* - Enable DMA request data
* - Set timings
*/
- csqcfgr1 = FMC2_CSQCFGR1_DMADEN | FMC2_CSQCFGR1_CMD1T;
+ cfg[0] = FMC2_CSQCFGR1_DMADEN | FMC2_CSQCFGR1_CMD1T;
if (write_data)
- csqcfgr1 |= FIELD_PREP(FMC2_CSQCFGR1_CMD1, NAND_CMD_SEQIN);
+ cfg[0] |= FIELD_PREP(FMC2_CSQCFGR1_CMD1, NAND_CMD_SEQIN);
else
- csqcfgr1 |= FIELD_PREP(FMC2_CSQCFGR1_CMD1, NAND_CMD_READ0) |
- FMC2_CSQCFGR1_CMD2EN |
- FIELD_PREP(FMC2_CSQCFGR1_CMD2, NAND_CMD_READSTART) |
- FMC2_CSQCFGR1_CMD2T;
+ cfg[0] |= FIELD_PREP(FMC2_CSQCFGR1_CMD1, NAND_CMD_READ0) |
+ FMC2_CSQCFGR1_CMD2EN |
+ FIELD_PREP(FMC2_CSQCFGR1_CMD2, NAND_CMD_READSTART) |
+ FMC2_CSQCFGR1_CMD2T;
/*
* - Set Random Data Input/Random Data Read command
@@ -796,30 +776,29 @@ static void stm32_fmc2_nfc_rw_page_init(struct nand_chip *chip, int page,
* - Set timings
*/
if (write_data)
- csqcfgr2 = FIELD_PREP(FMC2_CSQCFGR2_RCMD1, NAND_CMD_RNDIN);
+ cfg[1] = FIELD_PREP(FMC2_CSQCFGR2_RCMD1, NAND_CMD_RNDIN);
else
- csqcfgr2 = FIELD_PREP(FMC2_CSQCFGR2_RCMD1, NAND_CMD_RNDOUT) |
- FMC2_CSQCFGR2_RCMD2EN |
- FIELD_PREP(FMC2_CSQCFGR2_RCMD2,
- NAND_CMD_RNDOUTSTART) |
- FMC2_CSQCFGR2_RCMD1T |
- FMC2_CSQCFGR2_RCMD2T;
+ cfg[1] = FIELD_PREP(FMC2_CSQCFGR2_RCMD1, NAND_CMD_RNDOUT) |
+ FMC2_CSQCFGR2_RCMD2EN |
+ FIELD_PREP(FMC2_CSQCFGR2_RCMD2, NAND_CMD_RNDOUTSTART) |
+ FMC2_CSQCFGR2_RCMD1T |
+ FMC2_CSQCFGR2_RCMD2T;
if (!raw) {
- csqcfgr2 |= write_data ? 0 : FMC2_CSQCFGR2_DMASEN;
- csqcfgr2 |= FMC2_CSQCFGR2_SQSDTEN;
+ cfg[1] |= write_data ? 0 : FMC2_CSQCFGR2_DMASEN;
+ cfg[1] |= FMC2_CSQCFGR2_SQSDTEN;
}
/*
* - Set the number of sectors to be written
* - Set timings
*/
- csqcfgr3 = FIELD_PREP(FMC2_CSQCFGR3_SNBR, chip->ecc.steps - 1);
+ cfg[2] = FIELD_PREP(FMC2_CSQCFGR3_SNBR, chip->ecc.steps - 1);
if (write_data) {
- csqcfgr3 |= FMC2_CSQCFGR3_RAC2T;
+ cfg[2] |= FMC2_CSQCFGR3_RAC2T;
if (chip->options & NAND_ROW_ADDR_3)
- csqcfgr3 |= FMC2_CSQCFGR3_AC5T;
+ cfg[2] |= FMC2_CSQCFGR3_AC5T;
else
- csqcfgr3 |= FMC2_CSQCFGR3_AC4T;
+ cfg[2] |= FMC2_CSQCFGR3_AC4T;
}
/*
@@ -827,8 +806,8 @@ static void stm32_fmc2_nfc_rw_page_init(struct nand_chip *chip, int page,
* Byte 1 and byte 2 => column, we start at 0x0
* Byte 3 and byte 4 => page
*/
- csqar1 = FIELD_PREP(FMC2_CSQCAR1_ADDC3, page);
- csqar1 |= FIELD_PREP(FMC2_CSQCAR1_ADDC4, page >> 8);
+ cfg[3] = FIELD_PREP(FMC2_CSQCAR1_ADDC3, page);
+ cfg[3] |= FIELD_PREP(FMC2_CSQCAR1_ADDC4, page >> 8);
/*
* - Set chip enable number
@@ -836,23 +815,19 @@ static void stm32_fmc2_nfc_rw_page_init(struct nand_chip *chip, int page,
* - Calculate the number of address cycles to be issued
* - Set byte 5 of address cycle if needed
*/
- csqar2 = FIELD_PREP(FMC2_CSQCAR2_NANDCEN, nfc->cs_sel);
+ cfg[4] = FIELD_PREP(FMC2_CSQCAR2_NANDCEN, nfc->cs_sel);
if (chip->options & NAND_BUSWIDTH_16)
- csqar2 |= FIELD_PREP(FMC2_CSQCAR2_SAO, ecc_offset >> 1);
+ cfg[4] |= FIELD_PREP(FMC2_CSQCAR2_SAO, ecc_offset >> 1);
else
- csqar2 |= FIELD_PREP(FMC2_CSQCAR2_SAO, ecc_offset);
+ cfg[4] |= FIELD_PREP(FMC2_CSQCAR2_SAO, ecc_offset);
if (chip->options & NAND_ROW_ADDR_3) {
- csqcfgr1 |= FIELD_PREP(FMC2_CSQCFGR1_ACYNBR, 5);
- csqar2 |= FIELD_PREP(FMC2_CSQCAR2_ADDC5, page >> 16);
+ cfg[0] |= FIELD_PREP(FMC2_CSQCFGR1_ACYNBR, 5);
+ cfg[4] |= FIELD_PREP(FMC2_CSQCAR2_ADDC5, page >> 16);
} else {
- csqcfgr1 |= FIELD_PREP(FMC2_CSQCFGR1_ACYNBR, 4);
+ cfg[0] |= FIELD_PREP(FMC2_CSQCFGR1_ACYNBR, 4);
}
- writel_relaxed(csqcfgr1, nfc->io_base + FMC2_CSQCFGR1);
- writel_relaxed(csqcfgr2, nfc->io_base + FMC2_CSQCFGR2);
- writel_relaxed(csqcfgr3, nfc->io_base + FMC2_CSQCFGR3);
- writel_relaxed(csqar1, nfc->io_base + FMC2_CSQAR1);
- writel_relaxed(csqar2, nfc->io_base + FMC2_CSQAR2);
+ regmap_bulk_write(nfc->regmap, FMC2_CSQCFGR1, cfg, 5);
}
static void stm32_fmc2_nfc_dma_callback(void *arg)
@@ -870,7 +845,6 @@ static int stm32_fmc2_nfc_xfer(struct nand_chip *chip, const u8 *buf,
struct dma_chan *dma_ch = nfc->dma_rx_ch;
enum dma_data_direction dma_data_dir = DMA_FROM_DEVICE;
enum dma_transfer_direction dma_transfer_dir = DMA_DEV_TO_MEM;
- u32 csqcr = readl_relaxed(nfc->io_base + FMC2_CSQCR);
int eccsteps = chip->ecc.steps;
int eccsize = chip->ecc.size;
unsigned long timeout = msecs_to_jiffies(FMC2_TIMEOUT_MS);
@@ -948,8 +922,8 @@ static int stm32_fmc2_nfc_xfer(struct nand_chip *chip, const u8 *buf,
stm32_fmc2_nfc_enable_seq_irq(nfc);
/* Start the transfer */
- csqcr |= FMC2_CSQCR_CSQSTART;
- writel_relaxed(csqcr, nfc->io_base + FMC2_CSQCR);
+ regmap_update_bits(nfc->regmap, FMC2_CSQCR,
+ FMC2_CSQCR_CSQSTART, FMC2_CSQCR_CSQSTART);
/* Wait end of sequencer transfer */
if (!wait_for_completion_timeout(&nfc->complete, timeout)) {
@@ -1042,11 +1016,13 @@ static int stm32_fmc2_nfc_seq_write_page_raw(struct nand_chip *chip,
}
/* Get a status indicating which sectors have errors */
-static inline u16 stm32_fmc2_nfc_get_mapping_status(struct stm32_fmc2_nfc *nfc)
+static u16 stm32_fmc2_nfc_get_mapping_status(struct stm32_fmc2_nfc *nfc)
{
- u32 csqemsr = readl_relaxed(nfc->io_base + FMC2_CSQEMSR);
+ u32 csqemsr;
+
+ regmap_read(nfc->regmap, FMC2_CSQEMSR, &csqemsr);
- return csqemsr & FMC2_CSQEMSR_SEM;
+ return FIELD_GET(FMC2_CSQEMSR_SEM, csqemsr);
}
static int stm32_fmc2_nfc_seq_correct(struct nand_chip *chip, u8 *dat,
@@ -1302,9 +1278,9 @@ static int stm32_fmc2_nfc_waitrdy(struct nand_chip *chip,
u32 isr, sr;
/* Check if there is no pending requests to the NAND flash */
- if (readl_relaxed_poll_timeout_atomic(nfc->io_base + FMC2_SR, sr,
- sr & FMC2_SR_NWRF, 1,
- 1000 * FMC2_TIMEOUT_MS))
+ if (regmap_read_poll_timeout(nfc->regmap, FMC2_SR, sr,
+ sr & FMC2_SR_NWRF, 1,
+ 1000 * FMC2_TIMEOUT_MS))
dev_warn(nfc->dev, "Waitrdy timeout\n");
/* Wait tWB before R/B# signal is low */
@@ -1312,12 +1288,12 @@ static int stm32_fmc2_nfc_waitrdy(struct nand_chip *chip,
ndelay(PSEC_TO_NSEC(timings->tWB_max));
/* R/B# signal is low, clear high level flag */
- writel_relaxed(FMC2_ICR_CIHLF, nfc->io_base + FMC2_ICR);
+ regmap_write(nfc->regmap, FMC2_ICR, FMC2_ICR_CIHLF);
/* Wait R/B# signal is high */
- return readl_relaxed_poll_timeout_atomic(nfc->io_base + FMC2_ISR,
- isr, isr & FMC2_ISR_IHLF,
- 5, 1000 * timeout_ms);
+ return regmap_read_poll_timeout(nfc->regmap, FMC2_ISR, isr,
+ isr & FMC2_ISR_IHLF, 5,
+ 1000 * FMC2_TIMEOUT_MS);
}
static int stm32_fmc2_nfc_exec_op(struct nand_chip *chip,
@@ -1375,8 +1351,9 @@ static int stm32_fmc2_nfc_exec_op(struct nand_chip *chip,
static void stm32_fmc2_nfc_init(struct stm32_fmc2_nfc *nfc)
{
- u32 pcr = readl_relaxed(nfc->io_base + FMC2_PCR);
- u32 bcr1 = readl_relaxed(nfc->io_base + FMC2_BCR1);
+ u32 pcr;
+
+ regmap_read(nfc->regmap, FMC2_PCR, &pcr);
/* Set CS used to undefined */
nfc->cs_sel = -1;
@@ -1407,12 +1384,12 @@ static void stm32_fmc2_nfc_init(struct stm32_fmc2_nfc *nfc)
pcr |= FIELD_PREP(FMC2_PCR_TAR, FMC2_PCR_TAR_DEFAULT);
/* Enable FMC2 controller */
- bcr1 |= FMC2_BCR1_FMC2EN;
+ regmap_update_bits(nfc->regmap, FMC2_BCR1,
+ FMC2_BCR1_FMC2EN, FMC2_BCR1_FMC2EN);
- writel_relaxed(bcr1, nfc->io_base + FMC2_BCR1);
- writel_relaxed(pcr, nfc->io_base + FMC2_PCR);
- writel_relaxed(FMC2_PMEM_DEFAULT, nfc->io_base + FMC2_PMEM);
- writel_relaxed(FMC2_PATT_DEFAULT, nfc->io_base + FMC2_PATT);
+ regmap_write(nfc->regmap, FMC2_PCR, pcr);
+ regmap_write(nfc->regmap, FMC2_PMEM, FMC2_PMEM_DEFAULT);
+ regmap_write(nfc->regmap, FMC2_PATT, FMC2_PATT_DEFAULT);
}
static void stm32_fmc2_nfc_calc_timings(struct nand_chip *chip,
@@ -1847,6 +1824,7 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
struct resource *res;
struct mtd_info *mtd;
struct nand_chip *chip;
+ void __iomem *mmio;
int chip_cs, mem_region, ret, irq;
nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL);
@@ -1862,9 +1840,13 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
return ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- nfc->io_base = devm_ioremap_resource(dev, res);
- if (IS_ERR(nfc->io_base))
- return PTR_ERR(nfc->io_base);
+ mmio = devm_ioremap_resource(dev, res);
+ if (IS_ERR(mmio))
+ return PTR_ERR(mmio);
+
+ nfc->regmap = devm_regmap_init_mmio(dev, mmio, &stm32_fmc2_regmap_cfg);
+ if (IS_ERR(nfc->regmap))
+ return PTR_ERR(nfc->regmap);
nfc->io_phys_addr = res->start;
--
1.9.1
The driver adds the support for the STMicroelectronics FMC2 EBI controller
found on STM32MP SOCs.
Signed-off-by: Christophe Kerello <[email protected]>
---
Changes in v3:
- Move in memory folder
- Merge MFD and BUS drivers to avoid a MFD driver
drivers/memory/Kconfig | 10 +
drivers/memory/Makefile | 1 +
drivers/memory/stm32-fmc2-ebi.c | 1206 +++++++++++++++++++++++++++++++++++++++
3 files changed, 1217 insertions(+)
create mode 100644 drivers/memory/stm32-fmc2-ebi.c
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index 9bddca2..c651aaf 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -163,6 +163,16 @@ config PL353_SMC
This driver is for the ARM PL351/PL353 Static Memory
Controller(SMC) module.
+config STM32_FMC2_EBI
+ tristate "Support for FMC2 External Bus Interface on STM32MP SoCs"
+ depends on MACH_STM32MP157 || COMPILE_TEST
+ select MFD_SYSCON
+ help
+ Select this option to enable the STM32 FMC2 External Bus Interface
+ controller. This driver configures the transactions with external
+ devices (like SRAM, ethernet adapters, FPGAs, LCD displays, ...) on
+ SOCs containing the FMC2 External Bus Interface.
+
source "drivers/memory/samsung/Kconfig"
source "drivers/memory/tegra/Kconfig"
diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
index 27b4934..c7d36db 100644
--- a/drivers/memory/Makefile
+++ b/drivers/memory/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_JZ4780_NEMC) += jz4780-nemc.o
obj-$(CONFIG_MTK_SMI) += mtk-smi.o
obj-$(CONFIG_DA8XX_DDRCTL) += da8xx-ddrctl.o
obj-$(CONFIG_PL353_SMC) += pl353-smc.o
+obj-$(CONFIG_STM32_FMC2_EBI) += stm32-fmc2-ebi.o
obj-$(CONFIG_SAMSUNG_MC) += samsung/
obj-$(CONFIG_TEGRA_MC) += tegra/
diff --git a/drivers/memory/stm32-fmc2-ebi.c b/drivers/memory/stm32-fmc2-ebi.c
new file mode 100644
index 0000000..4d5758c4
--- /dev/null
+++ b/drivers/memory/stm32-fmc2-ebi.c
@@ -0,0 +1,1206 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) STMicroelectronics 2020
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/* FMC2 Controller Registers */
+#define FMC2_BCR1 0x0
+#define FMC2_BTR1 0x4
+#define FMC2_BCR(x) ((x) * 0x8 + FMC2_BCR1)
+#define FMC2_BTR(x) ((x) * 0x8 + FMC2_BTR1)
+#define FMC2_PCSCNTR 0x20
+#define FMC2_BWTR1 0x104
+#define FMC2_BWTR(x) ((x) * 0x8 + FMC2_BWTR1)
+
+/* Register: FMC2_BCR1 */
+#define FMC2_BCR1_CCLKEN BIT(20)
+#define FMC2_BCR1_FMC2EN BIT(31)
+
+/* Register: FMC2_BCRx */
+#define FMC2_BCR_MBKEN BIT(0)
+#define FMC2_BCR_MUXEN BIT(1)
+#define FMC2_BCR_MTYP GENMASK(3, 2)
+#define FMC2_BCR_MWID GENMASK(5, 4)
+#define FMC2_BCR_FACCEN BIT(6)
+#define FMC2_BCR_BURSTEN BIT(8)
+#define FMC2_BCR_WAITPOL BIT(9)
+#define FMC2_BCR_WAITCFG BIT(11)
+#define FMC2_BCR_WREN BIT(12)
+#define FMC2_BCR_WAITEN BIT(13)
+#define FMC2_BCR_EXTMOD BIT(14)
+#define FMC2_BCR_ASYNCWAIT BIT(15)
+#define FMC2_BCR_CPSIZE GENMASK(18, 16)
+#define FMC2_BCR_CBURSTRW BIT(19)
+#define FMC2_BCR_NBLSET GENMASK(23, 22)
+
+/* Register: FMC2_BTRx/FMC2_BWTRx */
+#define FMC2_BXTR_ADDSET GENMASK(3, 0)
+#define FMC2_BXTR_ADDHLD GENMASK(7, 4)
+#define FMC2_BXTR_DATAST GENMASK(15, 8)
+#define FMC2_BXTR_BUSTURN GENMASK(19, 16)
+#define FMC2_BTR_CLKDIV GENMASK(23, 20)
+#define FMC2_BTR_DATLAT GENMASK(27, 24)
+#define FMC2_BXTR_ACCMOD GENMASK(29, 28)
+#define FMC2_BXTR_DATAHLD GENMASK(31, 30)
+
+/* Register: FMC2_PCSCNTR */
+#define FMC2_PCSCNTR_CSCOUNT GENMASK(15, 0)
+#define FMC2_PCSCNTR_CNTBEN(x) BIT((x) + 16)
+
+#define FMC2_MAX_EBI_CE 4
+#define FMC2_MAX_BANKS 5
+
+#define FMC2_BCR_CPSIZE_0 0x0
+#define FMC2_BCR_CPSIZE_128 0x1
+#define FMC2_BCR_CPSIZE_256 0x2
+#define FMC2_BCR_CPSIZE_512 0x3
+#define FMC2_BCR_CPSIZE_1024 0x4
+
+#define FMC2_BCR_MWID_8 0x0
+#define FMC2_BCR_MWID_16 0x1
+
+#define FMC2_BCR_MTYP_SRAM 0x0
+#define FMC2_BCR_MTYP_PSRAM 0x1
+#define FMC2_BCR_MTYP_NOR 0x2
+
+#define FMC2_BXTR_EXTMOD_A 0x0
+#define FMC2_BXTR_EXTMOD_B 0x1
+#define FMC2_BXTR_EXTMOD_C 0x2
+#define FMC2_BXTR_EXTMOD_D 0x3
+
+#define FMC2_BCR_NBLSET_MAX 0x3
+#define FMC2_BXTR_ADDSET_MAX 0xf
+#define FMC2_BXTR_ADDHLD_MAX 0xf
+#define FMC2_BXTR_DATAST_MAX 0xff
+#define FMC2_BXTR_BUSTURN_MAX 0xf
+#define FMC2_BXTR_DATAHLD_MAX 0x3
+#define FMC2_BTR_CLKDIV_MAX 0xf
+#define FMC2_BTR_DATLAT_MAX 0xf
+#define FMC2_PCSCNTR_CSCOUNT_MAX 0xff
+
+enum stm32_fmc2_ebi_bank {
+ FMC2_EBI1 = 0,
+ FMC2_EBI2,
+ FMC2_EBI3,
+ FMC2_EBI4,
+ FMC2_NAND
+};
+
+enum stm32_fmc2_ebi_register_type {
+ FMC2_REG_BCR = 1,
+ FMC2_REG_BTR,
+ FMC2_REG_BWTR,
+ FMC2_REG_PCSCNTR
+};
+
+enum stm32_fmc2_ebi_transaction_type {
+ FMC2_ASYNC_MODE_1_SRAM = 0,
+ FMC2_ASYNC_MODE_1_PSRAM,
+ FMC2_ASYNC_MODE_A_SRAM,
+ FMC2_ASYNC_MODE_A_PSRAM,
+ FMC2_ASYNC_MODE_2_NOR,
+ FMC2_ASYNC_MODE_B_NOR,
+ FMC2_ASYNC_MODE_C_NOR,
+ FMC2_ASYNC_MODE_D_NOR,
+ FMC2_SYNC_READ_SYNC_WRITE_PSRAM,
+ FMC2_SYNC_READ_ASYNC_WRITE_PSRAM,
+ FMC2_SYNC_READ_SYNC_WRITE_NOR,
+ FMC2_SYNC_READ_ASYNC_WRITE_NOR
+};
+
+enum stm32_fmc2_ebi_buswidth {
+ FMC2_BUSWIDTH_8 = 8,
+ FMC2_BUSWIDTH_16 = 16
+};
+
+enum stm32_fmc2_ebi_cpsize {
+ FMC2_CPSIZE_0 = 0,
+ FMC2_CPSIZE_128 = 128,
+ FMC2_CPSIZE_256 = 256,
+ FMC2_CPSIZE_512 = 512,
+ FMC2_CPSIZE_1024 = 1024
+};
+
+struct stm32_fmc2_ebi {
+ struct device *dev;
+ struct clk *clk;
+ struct regmap *regmap;
+ u8 bank_assigned;
+
+ u32 bcr[FMC2_MAX_EBI_CE];
+ u32 btr[FMC2_MAX_EBI_CE];
+ u32 bwtr[FMC2_MAX_EBI_CE];
+ u32 pcscntr;
+};
+
+/*
+ * struct stm32_fmc2_prop - STM32 FMC2 EBI property
+ * @name: the device tree binding name of the property
+ * @bprop: indicate that it is a boolean property
+ * @mprop: indicate that it is a mandatory property
+ * @reg_type: the register that have to be modified
+ * @reg_mask: the bit that have to be modified in the selected register
+ * in case of it is a boolean property
+ * @reset_val: the default value that have to be set in case the property
+ * has not been defined in the device tree
+ * @check: this callback ckecks that the property is compliant with the
+ * transaction type selected
+ * @calculate: this callback is called to calculate for exemple a timing
+ * set in nanoseconds in the device tree in clock cycles or in
+ * clock period
+ * @set: this callback applies the values in the registers
+ */
+struct stm32_fmc2_prop {
+ const char *name;
+ bool bprop;
+ bool mprop;
+ int reg_type;
+ u32 reg_mask;
+ u32 reset_val;
+ int (*check)(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop, int cs);
+ u32 (*calculate)(struct stm32_fmc2_ebi *ebi, int cs, u32 setup);
+ int (*set)(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup);
+};
+
+static int stm32_fmc2_ebi_check_mux(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs)
+{
+ u32 bcr;
+
+ regmap_read(ebi->regmap, FMC2_BCR(cs), &bcr);
+
+ if (bcr & FMC2_BCR_MTYP)
+ return 0;
+
+ return -EINVAL;
+}
+
+static int stm32_fmc2_ebi_check_waitcfg(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs)
+{
+ u32 bcr, val = FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_NOR);
+
+ regmap_read(ebi->regmap, FMC2_BCR(cs), &bcr);
+
+ if ((bcr & FMC2_BCR_MTYP) == val && bcr & FMC2_BCR_BURSTEN)
+ return 0;
+
+ return -EINVAL;
+}
+
+static int stm32_fmc2_ebi_check_sync_trans(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs)
+{
+ u32 bcr;
+
+ regmap_read(ebi->regmap, FMC2_BCR(cs), &bcr);
+
+ if (bcr & FMC2_BCR_BURSTEN)
+ return 0;
+
+ return -EINVAL;
+}
+
+static int stm32_fmc2_ebi_check_async_trans(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs)
+{
+ u32 bcr;
+
+ regmap_read(ebi->regmap, FMC2_BCR(cs), &bcr);
+
+ if (!(bcr & FMC2_BCR_BURSTEN) || !(bcr & FMC2_BCR_CBURSTRW))
+ return 0;
+
+ return -EINVAL;
+}
+
+static int stm32_fmc2_ebi_check_cpsize(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs)
+{
+ u32 bcr, val = FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_PSRAM);
+
+ regmap_read(ebi->regmap, FMC2_BCR(cs), &bcr);
+
+ if ((bcr & FMC2_BCR_MTYP) == val && bcr & FMC2_BCR_BURSTEN)
+ return 0;
+
+ return -EINVAL;
+}
+
+static int stm32_fmc2_ebi_check_address_hold(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs)
+{
+ u32 bcr, bxtr, val = FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_D);
+
+ regmap_read(ebi->regmap, FMC2_BCR(cs), &bcr);
+ if (prop->reg_type == FMC2_REG_BWTR)
+ regmap_read(ebi->regmap, FMC2_BWTR(cs), &bxtr);
+ else
+ regmap_read(ebi->regmap, FMC2_BTR(cs), &bxtr);
+
+ if ((!(bcr & FMC2_BCR_BURSTEN) || !(bcr & FMC2_BCR_CBURSTRW)) &&
+ ((bxtr & FMC2_BXTR_ACCMOD) == val || bcr & FMC2_BCR_MUXEN))
+ return 0;
+
+ return -EINVAL;
+}
+
+static int stm32_fmc2_ebi_check_clk_period(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs)
+{
+ u32 bcr, bcr1;
+
+ regmap_read(ebi->regmap, FMC2_BCR(cs), &bcr);
+ if (cs)
+ regmap_read(ebi->regmap, FMC2_BCR1, &bcr1);
+ else
+ bcr1 = bcr;
+
+ if (bcr & FMC2_BCR_BURSTEN && (!cs || !(bcr1 & FMC2_BCR1_CCLKEN)))
+ return 0;
+
+ return -EINVAL;
+}
+
+static int stm32_fmc2_ebi_check_cclk(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs)
+{
+ if (cs)
+ return -EINVAL;
+
+ return stm32_fmc2_ebi_check_sync_trans(ebi, prop, cs);
+}
+
+static u32 stm32_fmc2_ebi_ns_to_clock_cycles(struct stm32_fmc2_ebi *ebi,
+ int cs, u32 setup)
+{
+ unsigned long hclk = clk_get_rate(ebi->clk);
+ unsigned long hclkp = NSEC_PER_SEC / (hclk / 1000);
+
+ return DIV_ROUND_UP(setup * 1000, hclkp);
+}
+
+static u32 stm32_fmc2_ebi_ns_to_clk_period(struct stm32_fmc2_ebi *ebi,
+ int cs, u32 setup)
+{
+ u32 nb_clk_cycles = stm32_fmc2_ebi_ns_to_clock_cycles(ebi, cs, setup);
+ u32 bcr, btr, clk_period;
+
+ regmap_read(ebi->regmap, FMC2_BCR1, &bcr);
+ if (bcr & FMC2_BCR1_CCLKEN || !cs)
+ regmap_read(ebi->regmap, FMC2_BTR1, &btr);
+ else
+ regmap_read(ebi->regmap, FMC2_BTR(cs), &btr);
+
+ clk_period = FIELD_GET(FMC2_BTR_CLKDIV, btr) + 1;
+
+ return DIV_ROUND_UP(nb_clk_cycles, clk_period);
+}
+
+static int stm32_fmc2_ebi_get_reg(int reg_type, int cs, u32 *reg)
+{
+ switch (reg_type) {
+ case FMC2_REG_BCR:
+ *reg = FMC2_BCR(cs);
+ break;
+ case FMC2_REG_BTR:
+ *reg = FMC2_BTR(cs);
+ break;
+ case FMC2_REG_BWTR:
+ *reg = FMC2_BWTR(cs);
+ break;
+ case FMC2_REG_PCSCNTR:
+ *reg = FMC2_PCSCNTR;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_bit_field(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 reg;
+ int ret;
+
+ ret = stm32_fmc2_ebi_get_reg(prop->reg_type, cs, ®);
+ if (ret)
+ return ret;
+
+ regmap_update_bits(ebi->regmap, reg, prop->reg_mask,
+ setup ? prop->reg_mask : 0);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_trans_type(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 bcr_mask, bcr = FMC2_BCR_WREN;
+ u32 btr_mask, btr = 0;
+ u32 bwtr_mask, bwtr = 0;
+
+ bwtr_mask = FMC2_BXTR_ACCMOD;
+ btr_mask = FMC2_BXTR_ACCMOD;
+ bcr_mask = FMC2_BCR_MUXEN | FMC2_BCR_MTYP | FMC2_BCR_FACCEN |
+ FMC2_BCR_WREN | FMC2_BCR_WAITEN | FMC2_BCR_BURSTEN |
+ FMC2_BCR_EXTMOD | FMC2_BCR_CBURSTRW;
+
+ switch (setup) {
+ case FMC2_ASYNC_MODE_1_SRAM:
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_SRAM);
+ /*
+ * MUXEN = 0, MTYP = 0, FACCEN = 0, BURSTEN = 0, WAITEN = 0,
+ * WREN = 1, EXTMOD = 0, CBURSTRW = 0, ACCMOD = 0
+ */
+ break;
+ case FMC2_ASYNC_MODE_1_PSRAM:
+ /*
+ * MUXEN = 0, MTYP = 1, FACCEN = 0, BURSTEN = 0, WAITEN = 0,
+ * WREN = 1, EXTMOD = 0, CBURSTRW = 0, ACCMOD = 0
+ */
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_PSRAM);
+ break;
+ case FMC2_ASYNC_MODE_A_SRAM:
+ /*
+ * MUXEN = 0, MTYP = 0, FACCEN = 0, BURSTEN = 0, WAITEN = 0,
+ * WREN = 1, EXTMOD = 1, CBURSTRW = 0, ACCMOD = 0
+ */
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_SRAM);
+ bcr |= FMC2_BCR_EXTMOD;
+ btr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_A);
+ bwtr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_A);
+ break;
+ case FMC2_ASYNC_MODE_A_PSRAM:
+ /*
+ * MUXEN = 0, MTYP = 1, FACCEN = 0, BURSTEN = 0, WAITEN = 0,
+ * WREN = 1, EXTMOD = 1, CBURSTRW = 0, ACCMOD = 0
+ */
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_PSRAM);
+ bcr |= FMC2_BCR_EXTMOD;
+ btr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_A);
+ bwtr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_A);
+ break;
+ case FMC2_ASYNC_MODE_2_NOR:
+ /*
+ * MUXEN = 0, MTYP = 2, FACCEN = 1, BURSTEN = 0, WAITEN = 0,
+ * WREN = 1, EXTMOD = 0, CBURSTRW = 0, ACCMOD = 0
+ */
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_NOR);
+ bcr |= FMC2_BCR_FACCEN;
+ break;
+ case FMC2_ASYNC_MODE_B_NOR:
+ /*
+ * MUXEN = 0, MTYP = 2, FACCEN = 1, BURSTEN = 0, WAITEN = 0,
+ * WREN = 1, EXTMOD = 1, CBURSTRW = 0, ACCMOD = 1
+ */
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_NOR);
+ bcr |= FMC2_BCR_FACCEN | FMC2_BCR_EXTMOD;
+ btr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_B);
+ bwtr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_B);
+ break;
+ case FMC2_ASYNC_MODE_C_NOR:
+ /*
+ * MUXEN = 0, MTYP = 2, FACCEN = 1, BURSTEN = 0, WAITEN = 0,
+ * WREN = 1, EXTMOD = 1, CBURSTRW = 0, ACCMOD = 2
+ */
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_NOR);
+ bcr |= FMC2_BCR_FACCEN | FMC2_BCR_EXTMOD;
+ btr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_C);
+ bwtr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_C);
+ break;
+ case FMC2_ASYNC_MODE_D_NOR:
+ /*
+ * MUXEN = 0, MTYP = 2, FACCEN = 1, BURSTEN = 0, WAITEN = 0,
+ * WREN = 1, EXTMOD = 1, CBURSTRW = 0, ACCMOD = 3
+ */
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_NOR);
+ bcr |= FMC2_BCR_FACCEN | FMC2_BCR_EXTMOD;
+ btr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_D);
+ bwtr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_D);
+ break;
+ case FMC2_SYNC_READ_SYNC_WRITE_PSRAM:
+ /*
+ * MUXEN = 0, MTYP = 1, FACCEN = 0, BURSTEN = 1, WAITEN = 0,
+ * WREN = 1, EXTMOD = 0, CBURSTRW = 1, ACCMOD = 0
+ */
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_PSRAM);
+ bcr |= FMC2_BCR_BURSTEN | FMC2_BCR_CBURSTRW;
+ break;
+ case FMC2_SYNC_READ_ASYNC_WRITE_PSRAM:
+ /*
+ * MUXEN = 0, MTYP = 1, FACCEN = 0, BURSTEN = 1, WAITEN = 0,
+ * WREN = 1, EXTMOD = 0, CBURSTRW = 0, ACCMOD = 0
+ */
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_PSRAM);
+ bcr |= FMC2_BCR_BURSTEN;
+ break;
+ case FMC2_SYNC_READ_SYNC_WRITE_NOR:
+ /*
+ * MUXEN = 0, MTYP = 2, FACCEN = 1, BURSTEN = 1, WAITEN = 0,
+ * WREN = 1, EXTMOD = 0, CBURSTRW = 1, ACCMOD = 0
+ */
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_NOR);
+ bcr |= FMC2_BCR_FACCEN | FMC2_BCR_BURSTEN | FMC2_BCR_CBURSTRW;
+ break;
+ case FMC2_SYNC_READ_ASYNC_WRITE_NOR:
+ /*
+ * MUXEN = 0, MTYP = 2, FACCEN = 1, BURSTEN = 1, WAITEN = 0,
+ * WREN = 1, EXTMOD = 0, CBURSTRW = 0, ACCMOD = 0
+ */
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_NOR);
+ bcr |= FMC2_BCR_FACCEN | FMC2_BCR_BURSTEN;
+ break;
+ default:
+ /* Type of transaction not supported */
+ return -EINVAL;
+ }
+
+ if (bcr & FMC2_BCR_EXTMOD)
+ regmap_update_bits(ebi->regmap, FMC2_BWTR(cs),
+ bwtr_mask, bwtr);
+ regmap_update_bits(ebi->regmap, FMC2_BTR(cs), btr_mask, btr);
+ regmap_update_bits(ebi->regmap, FMC2_BCR(cs), bcr_mask, bcr);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_buswidth(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 val;
+
+ switch (setup) {
+ case FMC2_BUSWIDTH_8:
+ val = FIELD_PREP(FMC2_BCR_MWID, FMC2_BCR_MWID_8);
+ break;
+ case FMC2_BUSWIDTH_16:
+ val = FIELD_PREP(FMC2_BCR_MWID, FMC2_BCR_MWID_16);
+ break;
+ default:
+ /* Buswidth not supported */
+ return -EINVAL;
+ }
+
+ regmap_update_bits(ebi->regmap, FMC2_BCR(cs), FMC2_BCR_MWID, val);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_cpsize(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 val;
+
+ switch (setup) {
+ case FMC2_CPSIZE_0:
+ val = FIELD_PREP(FMC2_BCR_CPSIZE, FMC2_BCR_CPSIZE_0);
+ break;
+ case FMC2_CPSIZE_128:
+ val = FIELD_PREP(FMC2_BCR_CPSIZE, FMC2_BCR_CPSIZE_128);
+ break;
+ case FMC2_CPSIZE_256:
+ val = FIELD_PREP(FMC2_BCR_CPSIZE, FMC2_BCR_CPSIZE_256);
+ break;
+ case FMC2_CPSIZE_512:
+ val = FIELD_PREP(FMC2_BCR_CPSIZE, FMC2_BCR_CPSIZE_512);
+ break;
+ case FMC2_CPSIZE_1024:
+ val = FIELD_PREP(FMC2_BCR_CPSIZE, FMC2_BCR_CPSIZE_1024);
+ break;
+ default:
+ /* Cpsize not supported */
+ return -EINVAL;
+ }
+
+ regmap_update_bits(ebi->regmap, FMC2_BCR(cs), FMC2_BCR_CPSIZE, val);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_bl_setup(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 val;
+
+ val = min_t(u32, setup, FMC2_BCR_NBLSET_MAX);
+ val = FIELD_PREP(FMC2_BCR_NBLSET, val);
+ regmap_update_bits(ebi->regmap, FMC2_BCR(cs), FMC2_BCR_NBLSET, val);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_address_setup(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 bcr, bxtr, reg;
+ u32 val = FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_D);
+ int ret;
+
+ ret = stm32_fmc2_ebi_get_reg(prop->reg_type, cs, ®);
+ if (ret)
+ return ret;
+
+ regmap_read(ebi->regmap, FMC2_BCR(cs), &bcr);
+ if (prop->reg_type == FMC2_REG_BWTR)
+ regmap_read(ebi->regmap, FMC2_BWTR(cs), &bxtr);
+ else
+ regmap_read(ebi->regmap, FMC2_BTR(cs), &bxtr);
+
+ if ((bxtr & FMC2_BXTR_ACCMOD) == val || bcr & FMC2_BCR_MUXEN)
+ val = clamp_val(setup, 1, FMC2_BXTR_ADDSET_MAX);
+ else
+ val = min_t(u32, setup, FMC2_BXTR_ADDSET_MAX);
+ val = FIELD_PREP(FMC2_BXTR_ADDSET, val);
+ regmap_update_bits(ebi->regmap, reg, FMC2_BXTR_ADDSET, val);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_address_hold(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 val, reg;
+ int ret;
+
+ ret = stm32_fmc2_ebi_get_reg(prop->reg_type, cs, ®);
+ if (ret)
+ return ret;
+
+ val = clamp_val(setup, 1, FMC2_BXTR_ADDHLD_MAX);
+ val = FIELD_PREP(FMC2_BXTR_ADDHLD, val);
+ regmap_update_bits(ebi->regmap, reg, FMC2_BXTR_ADDHLD, val);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_data_setup(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 val, reg;
+ int ret;
+
+ ret = stm32_fmc2_ebi_get_reg(prop->reg_type, cs, ®);
+ if (ret)
+ return ret;
+
+ val = clamp_val(setup, 1, FMC2_BXTR_DATAST_MAX);
+ val = FIELD_PREP(FMC2_BXTR_DATAST, val);
+ regmap_update_bits(ebi->regmap, reg, FMC2_BXTR_DATAST, val);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_bus_turnaround(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 val, reg;
+ int ret;
+
+ ret = stm32_fmc2_ebi_get_reg(prop->reg_type, cs, ®);
+ if (ret)
+ return ret;
+
+ val = setup ? min_t(u32, setup - 1, FMC2_BXTR_BUSTURN_MAX) : 0;
+ val = FIELD_PREP(FMC2_BXTR_BUSTURN, val);
+ regmap_update_bits(ebi->regmap, reg, FMC2_BXTR_BUSTURN, val);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_data_hold(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 val, reg;
+ int ret;
+
+ ret = stm32_fmc2_ebi_get_reg(prop->reg_type, cs, ®);
+ if (ret)
+ return ret;
+
+ if (prop->reg_type == FMC2_REG_BWTR)
+ val = setup ? min_t(u32, setup - 1, FMC2_BXTR_DATAHLD_MAX) : 0;
+ else
+ val = min_t(u32, setup, FMC2_BXTR_DATAHLD_MAX);
+ val = FIELD_PREP(FMC2_BXTR_DATAHLD, val);
+ regmap_update_bits(ebi->regmap, reg, FMC2_BXTR_DATAHLD, val);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_clk_period(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 val;
+
+ val = setup ? clamp_val(setup - 1, 1, FMC2_BTR_CLKDIV_MAX) : 1;
+ val = FIELD_PREP(FMC2_BTR_CLKDIV, val);
+ regmap_update_bits(ebi->regmap, FMC2_BTR(cs), FMC2_BTR_CLKDIV, val);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_data_latency(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 val;
+
+ val = setup > 1 ? min_t(u32, setup - 2, FMC2_BTR_DATLAT_MAX) : 0;
+ val = FIELD_PREP(FMC2_BTR_DATLAT, val);
+ regmap_update_bits(ebi->regmap, FMC2_BTR(cs), FMC2_BTR_DATLAT, val);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_max_low_pulse(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 old_val, new_val, pcscntr;
+
+ if (setup < 1)
+ return 0;
+
+ regmap_read(ebi->regmap, FMC2_PCSCNTR, &pcscntr);
+
+ /* Enable counter for the bank */
+ regmap_update_bits(ebi->regmap, FMC2_PCSCNTR,
+ FMC2_PCSCNTR_CNTBEN(cs),
+ FMC2_PCSCNTR_CNTBEN(cs));
+
+ new_val = min_t(u32, setup - 1, FMC2_PCSCNTR_CSCOUNT_MAX);
+ old_val = FIELD_GET(FMC2_PCSCNTR_CSCOUNT, pcscntr);
+ if (old_val && new_val > old_val)
+ /* Keep current counter value */
+ return 0;
+
+ new_val = FIELD_PREP(FMC2_PCSCNTR_CSCOUNT, new_val);
+ regmap_update_bits(ebi->regmap, FMC2_PCSCNTR,
+ FMC2_PCSCNTR_CSCOUNT, new_val);
+
+ return 0;
+}
+
+static const struct stm32_fmc2_prop stm32_fmc2_child_props[] = {
+ /* st,fmc2-ebi-cs-trans-type must be the first property */
+ {
+ .name = "st,fmc2-ebi-cs-transaction-type",
+ .mprop = true,
+ .set = stm32_fmc2_ebi_set_trans_type,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-cclk-enable",
+ .bprop = true,
+ .reg_type = FMC2_REG_BCR,
+ .reg_mask = FMC2_BCR1_CCLKEN,
+ .check = stm32_fmc2_ebi_check_cclk,
+ .set = stm32_fmc2_ebi_set_bit_field,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-mux-enable",
+ .bprop = true,
+ .reg_type = FMC2_REG_BCR,
+ .reg_mask = FMC2_BCR_MUXEN,
+ .check = stm32_fmc2_ebi_check_mux,
+ .set = stm32_fmc2_ebi_set_bit_field,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-buswidth",
+ .reset_val = FMC2_BUSWIDTH_16,
+ .set = stm32_fmc2_ebi_set_buswidth,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-waitpol-high",
+ .bprop = true,
+ .reg_type = FMC2_REG_BCR,
+ .reg_mask = FMC2_BCR_WAITPOL,
+ .set = stm32_fmc2_ebi_set_bit_field,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-waitcfg-enable",
+ .bprop = true,
+ .reg_type = FMC2_REG_BCR,
+ .reg_mask = FMC2_BCR_WAITCFG,
+ .check = stm32_fmc2_ebi_check_waitcfg,
+ .set = stm32_fmc2_ebi_set_bit_field,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-wait-enable",
+ .bprop = true,
+ .reg_type = FMC2_REG_BCR,
+ .reg_mask = FMC2_BCR_WAITEN,
+ .check = stm32_fmc2_ebi_check_sync_trans,
+ .set = stm32_fmc2_ebi_set_bit_field,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-asyncwait-enable",
+ .bprop = true,
+ .reg_type = FMC2_REG_BCR,
+ .reg_mask = FMC2_BCR_ASYNCWAIT,
+ .check = stm32_fmc2_ebi_check_async_trans,
+ .set = stm32_fmc2_ebi_set_bit_field,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-cpsize",
+ .check = stm32_fmc2_ebi_check_cpsize,
+ .set = stm32_fmc2_ebi_set_cpsize,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-byte-lane-setup-ns",
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_bl_setup,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-address-setup-ns",
+ .reg_type = FMC2_REG_BTR,
+ .reset_val = FMC2_BXTR_ADDSET_MAX,
+ .check = stm32_fmc2_ebi_check_async_trans,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_address_setup,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-address-hold-ns",
+ .reg_type = FMC2_REG_BTR,
+ .reset_val = FMC2_BXTR_ADDHLD_MAX,
+ .check = stm32_fmc2_ebi_check_address_hold,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_address_hold,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-data-setup-ns",
+ .reg_type = FMC2_REG_BTR,
+ .reset_val = FMC2_BXTR_DATAST_MAX,
+ .check = stm32_fmc2_ebi_check_async_trans,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_data_setup,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-bus-turnaround-ns",
+ .reg_type = FMC2_REG_BTR,
+ .reset_val = FMC2_BXTR_BUSTURN_MAX + 1,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_bus_turnaround,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-data-hold-ns",
+ .reg_type = FMC2_REG_BTR,
+ .check = stm32_fmc2_ebi_check_async_trans,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_data_hold,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-clk-period-ns",
+ .reset_val = FMC2_BTR_CLKDIV_MAX + 1,
+ .check = stm32_fmc2_ebi_check_clk_period,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_clk_period,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-data-latency-ns",
+ .check = stm32_fmc2_ebi_check_sync_trans,
+ .calculate = stm32_fmc2_ebi_ns_to_clk_period,
+ .set = stm32_fmc2_ebi_set_data_latency,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-write-address-setup-ns",
+ .reg_type = FMC2_REG_BWTR,
+ .reset_val = FMC2_BXTR_ADDSET_MAX,
+ .check = stm32_fmc2_ebi_check_async_trans,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_address_setup,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-write-address-hold-ns",
+ .reg_type = FMC2_REG_BWTR,
+ .reset_val = FMC2_BXTR_ADDHLD_MAX,
+ .check = stm32_fmc2_ebi_check_address_hold,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_address_hold,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-write-data-setup-ns",
+ .reg_type = FMC2_REG_BWTR,
+ .reset_val = FMC2_BXTR_DATAST_MAX,
+ .check = stm32_fmc2_ebi_check_async_trans,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_data_setup,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-write-bus-turnaround-ns",
+ .reg_type = FMC2_REG_BWTR,
+ .reset_val = FMC2_BXTR_BUSTURN_MAX + 1,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_bus_turnaround,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-write-data-hold-ns",
+ .reg_type = FMC2_REG_BWTR,
+ .check = stm32_fmc2_ebi_check_async_trans,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_data_hold,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-max-low-pulse-ns",
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_max_low_pulse,
+ },
+};
+
+static int stm32_fmc2_ebi_parse_prop(struct stm32_fmc2_ebi *ebi,
+ struct device_node *dev_node,
+ const struct stm32_fmc2_prop *prop,
+ int cs)
+{
+ struct device *dev = ebi->dev;
+ u32 setup = 0;
+
+ if (!prop->set) {
+ dev_err(dev, "property %s is not well defined\n", prop->name);
+ return -EINVAL;
+ }
+
+ if (prop->check && prop->check(ebi, prop, cs))
+ /* Skeep this property */
+ return 0;
+
+ if (prop->bprop) {
+ bool bprop;
+
+ bprop = of_property_read_bool(dev_node, prop->name);
+ if (prop->mprop && !bprop) {
+ dev_err(dev, "mandatory property %s not defined in the device tree\n",
+ prop->name);
+ return -EINVAL;
+ }
+
+ if (bprop)
+ setup = 1;
+ } else {
+ u32 val;
+ int ret;
+
+ ret = of_property_read_u32(dev_node, prop->name, &val);
+ if (prop->mprop && ret) {
+ dev_err(dev, "mandatory property %s not defined in the device tree\n",
+ prop->name);
+ return ret;
+ }
+
+ if (ret)
+ setup = prop->reset_val;
+ else if (prop->calculate)
+ setup = prop->calculate(ebi, cs, val);
+ else
+ setup = val;
+ }
+
+ return prop->set(ebi, prop, cs, setup);
+}
+
+static void stm32_fmc2_ebi_enable_bank(struct stm32_fmc2_ebi *ebi, int cs)
+{
+ regmap_update_bits(ebi->regmap, FMC2_BCR(cs),
+ FMC2_BCR_MBKEN, FMC2_BCR_MBKEN);
+}
+
+static void stm32_fmc2_ebi_disable_bank(struct stm32_fmc2_ebi *ebi, int cs)
+{
+ regmap_update_bits(ebi->regmap, FMC2_BCR(cs), FMC2_BCR_MBKEN, 0);
+}
+
+static void stm32_fmc2_ebi_save_setup(struct stm32_fmc2_ebi *ebi)
+{
+ unsigned int cs;
+
+ for (cs = 0; cs < FMC2_MAX_EBI_CE; cs++) {
+ regmap_read(ebi->regmap, FMC2_BCR(cs), &ebi->bcr[cs]);
+ regmap_read(ebi->regmap, FMC2_BTR(cs), &ebi->btr[cs]);
+ regmap_read(ebi->regmap, FMC2_BWTR(cs), &ebi->bwtr[cs]);
+ }
+
+ regmap_read(ebi->regmap, FMC2_PCSCNTR, &ebi->pcscntr);
+}
+
+static void stm32_fmc2_ebi_set_setup(struct stm32_fmc2_ebi *ebi)
+{
+ unsigned int cs;
+
+ for (cs = 0; cs < FMC2_MAX_EBI_CE; cs++) {
+ regmap_write(ebi->regmap, FMC2_BCR(cs), ebi->bcr[cs]);
+ regmap_write(ebi->regmap, FMC2_BTR(cs), ebi->btr[cs]);
+ regmap_write(ebi->regmap, FMC2_BWTR(cs), ebi->bwtr[cs]);
+ }
+
+ regmap_write(ebi->regmap, FMC2_PCSCNTR, ebi->pcscntr);
+}
+
+static void stm32_fmc2_ebi_disable_banks(struct stm32_fmc2_ebi *ebi)
+{
+ unsigned int cs;
+
+ for (cs = 0; cs < FMC2_MAX_EBI_CE; cs++) {
+ if (!(ebi->bank_assigned & BIT(cs)))
+ continue;
+
+ stm32_fmc2_ebi_disable_bank(ebi, cs);
+ }
+}
+
+/* NWAIT signal can not be connected to EBI controller and NAND controller */
+static bool stm32_fmc2_ebi_nwait_used_by_ctrls(struct stm32_fmc2_ebi *ebi)
+{
+ unsigned int cs;
+ u32 bcr;
+
+ for (cs = 0; cs < FMC2_MAX_EBI_CE; cs++) {
+ if (!(ebi->bank_assigned & BIT(cs)))
+ continue;
+
+ regmap_read(ebi->regmap, FMC2_BCR(cs), &bcr);
+ if ((bcr & FMC2_BCR_WAITEN || bcr & FMC2_BCR_ASYNCWAIT) &&
+ ebi->bank_assigned & BIT(FMC2_NAND))
+ return true;
+ }
+
+ return false;
+}
+
+static void stm32_fmc2_ebi_enable(struct stm32_fmc2_ebi *ebi)
+{
+ regmap_update_bits(ebi->regmap, FMC2_BCR1,
+ FMC2_BCR1_FMC2EN, FMC2_BCR1_FMC2EN);
+}
+
+static void stm32_fmc2_ebi_disable(struct stm32_fmc2_ebi *ebi)
+{
+ regmap_update_bits(ebi->regmap, FMC2_BCR1, FMC2_BCR1_FMC2EN, 0);
+}
+
+static int stm32_fmc2_ebi_setup_cs(struct stm32_fmc2_ebi *ebi,
+ struct device_node *dev_node,
+ u32 cs)
+{
+ unsigned int i;
+ int ret;
+
+ stm32_fmc2_ebi_disable_bank(ebi, cs);
+
+ for (i = 0; i < ARRAY_SIZE(stm32_fmc2_child_props); i++) {
+ const struct stm32_fmc2_prop *p = &stm32_fmc2_child_props[i];
+
+ ret = stm32_fmc2_ebi_parse_prop(ebi, dev_node, p, cs);
+ if (ret) {
+ dev_err(ebi->dev, "property %s could not be set: %d\n",
+ p->name, ret);
+ return ret;
+ }
+ }
+
+ stm32_fmc2_ebi_enable_bank(ebi, cs);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_parse_dt(struct stm32_fmc2_ebi *ebi)
+{
+ struct device *dev = ebi->dev;
+ struct device_node *child;
+ bool child_found = false;
+ u32 bank;
+ int ret;
+
+ for_each_available_child_of_node(dev->of_node, child) {
+ ret = of_property_read_u32(child, "reg", &bank);
+ if (ret) {
+ dev_err(dev, "could not retrieve reg property: %d\n",
+ ret);
+ return ret;
+ }
+
+ if (bank >= FMC2_MAX_BANKS) {
+ dev_err(dev, "invalid reg value: %d\n", bank);
+ return -EINVAL;
+ }
+
+ if (ebi->bank_assigned & BIT(bank)) {
+ dev_err(dev, "bank already assigned: %d\n", bank);
+ return -EINVAL;
+ }
+
+ if (bank < FMC2_MAX_EBI_CE) {
+ ret = stm32_fmc2_ebi_setup_cs(ebi, child, bank);
+ if (ret) {
+ dev_err(dev, "setup chip select %d failed: %d\n",
+ bank, ret);
+ return ret;
+ }
+ }
+
+ ebi->bank_assigned |= BIT(bank);
+ child_found = true;
+ }
+
+ if (!child_found) {
+ dev_warn(dev, "no subnodes found, disable the driver.\n");
+ return -ENODEV;
+ }
+
+ if (stm32_fmc2_ebi_nwait_used_by_ctrls(ebi)) {
+ dev_err(dev, "NWAIT signal connected to EBI and NAND controllers\n");
+ return -EINVAL;
+ }
+
+ stm32_fmc2_ebi_enable(ebi);
+
+ return of_platform_populate(dev->of_node, NULL, NULL, dev);
+}
+
+static int stm32_fmc2_ebi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct stm32_fmc2_ebi *ebi;
+ struct reset_control *rstc;
+ int ret;
+
+ ebi = devm_kzalloc(&pdev->dev, sizeof(*ebi), GFP_KERNEL);
+ if (!ebi)
+ return -ENOMEM;
+
+ ebi->dev = dev;
+
+ ebi->regmap = device_node_to_regmap(dev->of_node);
+ if (IS_ERR(ebi->regmap))
+ return PTR_ERR(ebi->regmap);
+
+ ebi->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(ebi->clk))
+ return PTR_ERR(ebi->clk);
+
+ rstc = devm_reset_control_get(dev, NULL);
+ if (PTR_ERR(rstc) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ ret = clk_prepare_enable(ebi->clk);
+ if (ret)
+ return ret;
+
+ if (!IS_ERR(rstc)) {
+ reset_control_assert(rstc);
+ reset_control_deassert(rstc);
+ }
+
+ ret = stm32_fmc2_ebi_parse_dt(ebi);
+ if (ret)
+ goto err_release;
+
+ stm32_fmc2_ebi_save_setup(ebi);
+ platform_set_drvdata(pdev, ebi);
+
+ return 0;
+
+err_release:
+ stm32_fmc2_ebi_disable_banks(ebi);
+ stm32_fmc2_ebi_disable(ebi);
+ clk_disable_unprepare(ebi->clk);
+
+ return ret;
+}
+
+static int stm32_fmc2_ebi_remove(struct platform_device *pdev)
+{
+ struct stm32_fmc2_ebi *ebi = platform_get_drvdata(pdev);
+
+ of_platform_depopulate(&pdev->dev);
+ stm32_fmc2_ebi_disable_banks(ebi);
+ stm32_fmc2_ebi_disable(ebi);
+ clk_disable_unprepare(ebi->clk);
+
+ return 0;
+}
+
+static int __maybe_unused stm32_fmc2_ebi_suspend(struct device *dev)
+{
+ struct stm32_fmc2_ebi *ebi = dev_get_drvdata(dev);
+
+ stm32_fmc2_ebi_disable(ebi);
+ clk_disable_unprepare(ebi->clk);
+ pinctrl_pm_select_sleep_state(dev);
+
+ return 0;
+}
+
+static int __maybe_unused stm32_fmc2_ebi_resume(struct device *dev)
+{
+ struct stm32_fmc2_ebi *ebi = dev_get_drvdata(dev);
+ int ret;
+
+ pinctrl_pm_select_default_state(dev);
+
+ ret = clk_prepare_enable(ebi->clk);
+ if (ret)
+ return ret;
+
+ stm32_fmc2_ebi_set_setup(ebi);
+ stm32_fmc2_ebi_enable(ebi);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(stm32_fmc2_ebi_pm_ops, stm32_fmc2_ebi_suspend,
+ stm32_fmc2_ebi_resume);
+
+static const struct of_device_id stm32_fmc2_ebi_match[] = {
+ {.compatible = "st,stm32mp1-fmc2-ebi"},
+ {}
+};
+MODULE_DEVICE_TABLE(of, stm32_fmc2_ebi_match);
+
+static struct platform_driver stm32_fmc2_ebi_driver = {
+ .probe = stm32_fmc2_ebi_probe,
+ .remove = stm32_fmc2_ebi_remove,
+ .driver = {
+ .name = "stm32_fmc2_ebi",
+ .of_match_table = stm32_fmc2_ebi_match,
+ .pm = &stm32_fmc2_ebi_pm_ops,
+ },
+};
+module_platform_driver(stm32_fmc2_ebi_driver);
+
+MODULE_ALIAS("platform:stm32_fmc2_ebi");
+MODULE_AUTHOR("Christophe Kerello <[email protected]>");
+MODULE_DESCRIPTION("STMicroelectronics STM32 FMC2 ebi driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1
Hi Christophe,
Christophe Kerello <[email protected]> wrote on Wed, 6 May 2020
11:11:19 +0200:
> FMC2 EBI support has been added. Common resources (registers base
> and clock) are now shared between the 2 drivers. It means that the
> common resources should now be found in the parent device when EBI
> node is available.
>
> Signed-off-by: Christophe Kerello <[email protected]>
> ---
[...]
> +
> +static bool stm32_fmc2_nfc_check_for_parent(struct platform_device *pdev)
> +{
> + u32 i;
> + int nb_resources = 0;
> +
> + /* Count the number of resources in reg property */
> + for (i = 0; i < pdev->num_resources; i++) {
> + struct resource *res = &pdev->resource[i];
> +
> + if (resource_type(res) == IORESOURCE_MEM)
> + nb_resources++;
> + }
> +
> + /* Each CS needs 3 resources defined (data, cmd and addr) */
> + if (nb_resources % 3)
> + return false;
> +
> + return true;
> +}
This function looks fragile. Why not just checking the compatible
string of the parent node?
> +
> static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> @@ -1824,8 +1865,8 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
> struct resource *res;
> struct mtd_info *mtd;
> struct nand_chip *chip;
> - void __iomem *mmio;
> int chip_cs, mem_region, ret, irq;
> + int num_region = 1;
>
> nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL);
> if (!nfc)
> @@ -1834,23 +1875,19 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
> nfc->dev = dev;
> nand_controller_init(&nfc->base);
> nfc->base.ops = &stm32_fmc2_nfc_controller_ops;
> + nfc->has_parent = stm32_fmc2_nfc_check_for_parent(pdev);
> + if (nfc->has_parent)
> + num_region = 0;
>
> ret = stm32_fmc2_nfc_parse_dt(nfc);
> if (ret)
> return ret;
>
> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - mmio = devm_ioremap_resource(dev, res);
> - if (IS_ERR(mmio))
> - return PTR_ERR(mmio);
> -
> - nfc->regmap = devm_regmap_init_mmio(dev, mmio, &stm32_fmc2_regmap_cfg);
> - if (IS_ERR(nfc->regmap))
> - return PTR_ERR(nfc->regmap);
> -
> - nfc->io_phys_addr = res->start;
> + ret = stm32_fmc2_nfc_set_regmap_clk(pdev, nfc);
> + if (ret)
> + return ret;
Are you sure this driver sill works without the EBI block?
This change looks suspect.
>
> - for (chip_cs = 0, mem_region = 1; chip_cs < FMC2_MAX_CE;
> + for (chip_cs = 0, mem_region = num_region; chip_cs < FMC2_MAX_CE;
> chip_cs++, mem_region += 3) {
> if (!(nfc->cs_assigned & BIT(chip_cs)))
> continue;
> @@ -1888,10 +1925,6 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
>
> init_completion(&nfc->complete);
>
> - nfc->clk = devm_clk_get(dev, NULL);
> - if (IS_ERR(nfc->clk))
> - return PTR_ERR(nfc->clk);
> -
Same here
> ret = clk_prepare_enable(nfc->clk);
> if (ret) {
> dev_err(dev, "can not enable the clock\n");
Hi Christophe,
Christophe Kerello <[email protected]> wrote on Wed, 6 May 2020
11:11:09 +0200:
> The FMC2 functional block makes the interface with: synchronous and
> asynchronous static devices (such as PSNOR, PSRAM or other memory-mapped
> peripherals) and NAND flash memories.
> Its main purposes are:
> - to translate AXI transactions into the appropriate external device
> protocol
> - to meet the access time requirements of the external devices
> All external devices share the addresses, data and control signals with the
> controller. Each external device is accessed by means of a unique Chip
> Select. The FMC2 performs only one access at a time to an external device.
>
> Changes in v4:
> - bindings:
> - fix filename: st,stm32-fmc2-ebi.yaml
>
> Changes in v3:
> - NAND:
> - rename labels used on errors
> - add in the commit log the reason to increase FMC2_TIMEOUT_MS (patch 3)
> - add Miquel reviewed-by tag (patches 2/4/5/9)
> - EBI:
> - move in memory folder
> - merge MFD and BUS drivers to avoid a MFD driver
> - bindings:
> - pattern name has been modified
> - vendor properties have been modified
> - s/_/-/
> - add unit suffix (-ns) on timing properties
>
> Christophe Kerello (10):
> mtd: rawnand: stm32_fmc2: manage all errors cases at probe time
> mtd: rawnand: stm32_fmc2: remove useless inline comments
> mtd: rawnand: stm32_fmc2: use FMC2_TIMEOUT_MS for timeouts
> mtd: rawnand: stm32_fmc2: cleanup
> mtd: rawnand: stm32_fmc2: use FIELD_PREP/FIELD_GET macros
> dt-bindings: mtd: update STM32 FMC2 NAND controller documentation
> dt-bindings: memory-controller: add STM32 FMC2 EBI controller
> documentation
> memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver
> mtd: rawnand: stm32_fmc2: use regmap APIs
> mtd: rawnand: stm32_fmc2: get resources from parent node
>
> .../memory-controllers/st,stm32-fmc2-ebi.yaml | 261 +++++
> .../bindings/mtd/st,stm32-fmc2-nand.yaml | 19 +-
> drivers/memory/Kconfig | 10 +
> drivers/memory/Makefile | 1 +
> drivers/memory/stm32-fmc2-ebi.c | 1206 ++++++++++++++++++++
> drivers/mtd/nand/raw/Kconfig | 1 +
> drivers/mtd/nand/raw/stm32_fmc2_nand.c | 1176 ++++++++++---------
> 7 files changed, 2061 insertions(+), 613 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
> create mode 100644 drivers/memory/stm32-fmc2-ebi.c
>
I'm fine with the preparation patches 1-5 but the other patches need
Rob's hack and probably more changes. If it's fine with you I can apply
these patches for the next merge window and let more time to work on
the last 5.
Thanks,
Miquèl
Hi Miquel,
On 5/11/20 11:18 AM, Miquel Raynal wrote:
> Hi Christophe,
>
> Christophe Kerello <[email protected]> wrote on Wed, 6 May 2020
> 11:11:19 +0200:
>
>> FMC2 EBI support has been added. Common resources (registers base
>> and clock) are now shared between the 2 drivers. It means that the
>> common resources should now be found in the parent device when EBI
>> node is available.
>>
>> Signed-off-by: Christophe Kerello <[email protected]>
>> ---
>
> [...]
>
>> +
>> +static bool stm32_fmc2_nfc_check_for_parent(struct platform_device *pdev)
>> +{
>> + u32 i;
>> + int nb_resources = 0;
>> +
>> + /* Count the number of resources in reg property */
>> + for (i = 0; i < pdev->num_resources; i++) {
>> + struct resource *res = &pdev->resource[i];
>> +
>> + if (resource_type(res) == IORESOURCE_MEM)
>> + nb_resources++;
>> + }
>> +
>> + /* Each CS needs 3 resources defined (data, cmd and addr) */
>> + if (nb_resources % 3)
>> + return false;
>> +
>> + return true;
>> +}
>
> This function looks fragile. Why not just checking the compatible
> string of the parent node?
>
Yes, it is another way to check that we have an EBI parent node.
In this implementation, I was checking the number of reg tuples.
In case we have 6, it means that the register base address is defined in
the parent node (EBI node).
In case we have 7, it means that the register base address is defined in
the current node (NFC node).
>> +
>> static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
>> {
>> struct device *dev = &pdev->dev;
>> @@ -1824,8 +1865,8 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
>> struct resource *res;
>> struct mtd_info *mtd;
>> struct nand_chip *chip;
>> - void __iomem *mmio;
>> int chip_cs, mem_region, ret, irq;
>> + int num_region = 1;
>>
>> nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL);
>> if (!nfc)
>> @@ -1834,23 +1875,19 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
>> nfc->dev = dev;
>> nand_controller_init(&nfc->base);
>> nfc->base.ops = &stm32_fmc2_nfc_controller_ops;
>> + nfc->has_parent = stm32_fmc2_nfc_check_for_parent(pdev);
>> + if (nfc->has_parent)
>> + num_region = 0;
>>
>> ret = stm32_fmc2_nfc_parse_dt(nfc);
>> if (ret)
>> return ret;
>>
>> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> - mmio = devm_ioremap_resource(dev, res);
>> - if (IS_ERR(mmio))
>> - return PTR_ERR(mmio);
>> -
>> - nfc->regmap = devm_regmap_init_mmio(dev, mmio, &stm32_fmc2_regmap_cfg);
>> - if (IS_ERR(nfc->regmap))
>> - return PTR_ERR(nfc->regmap);
>> -
>> - nfc->io_phys_addr = res->start;
>> + ret = stm32_fmc2_nfc_set_regmap_clk(pdev, nfc);
>> + if (ret)
>> + return ret;
>
> Are you sure this driver sill works without the EBI block?
>
> This change looks suspect.
>
Yes, the driver works fine with current bindings and with EBI bindings.
In case we have an EBI parent node, it means that the register base
address and the clock are defined in the parent node.
Without any EBI parent node, it means that the register base address and
the clock are defined in the NFC node.
The new function stm32_fmc2_nfc_set_regmap_clk is looking for these 2
resources in the NFC node or in the parent node.
static int stm32_fmc2_nfc_set_regmap_clk(struct platform_device *pdev,
struct stm32_fmc2_nfc *nfc)
{
struct device *dev = &pdev->dev;
struct resource res;
int ret;
if (nfc->has_parent)
dev = dev->parent;
ret = of_address_to_resource(dev->of_node, 0, &res);
if (ret)
return ret;
nfc->io_phys_addr = res.start;
nfc->regmap = device_node_to_regmap(dev->of_node);
if (IS_ERR(nfc->regmap))
return PTR_ERR(nfc->regmap);
nfc->clk = devm_clk_get(dev, NULL);
if (IS_ERR(nfc->clk))
return PTR_ERR(nfc->clk);
return 0;
}
Regards,
Christophe Kerello.
>>
>> - for (chip_cs = 0, mem_region = 1; chip_cs < FMC2_MAX_CE;
>> + for (chip_cs = 0, mem_region = num_region; chip_cs < FMC2_MAX_CE;
>> chip_cs++, mem_region += 3) {
>> if (!(nfc->cs_assigned & BIT(chip_cs)))
>> continue;
>> @@ -1888,10 +1925,6 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
>>
>> init_completion(&nfc->complete);
>>
>> - nfc->clk = devm_clk_get(dev, NULL);
>> - if (IS_ERR(nfc->clk))
>> - return PTR_ERR(nfc->clk);
>> -
>
> Same here
>
>> ret = clk_prepare_enable(nfc->clk);
>> if (ret) {
>> dev_err(dev, "can not enable the clock\n");
>
Hi Miquel,
On 5/11/20 11:22 AM, Miquel Raynal wrote:
> Hi Christophe,
>
> Christophe Kerello <[email protected]> wrote on Wed, 6 May 2020
> 11:11:09 +0200:
>
>> The FMC2 functional block makes the interface with: synchronous and
>> asynchronous static devices (such as PSNOR, PSRAM or other memory-mapped
>> peripherals) and NAND flash memories.
>> Its main purposes are:
>> - to translate AXI transactions into the appropriate external device
>> protocol
>> - to meet the access time requirements of the external devices
>> All external devices share the addresses, data and control signals with the
>> controller. Each external device is accessed by means of a unique Chip
>> Select. The FMC2 performs only one access at a time to an external device.
>>
>> Changes in v4:
>> - bindings:
>> - fix filename: st,stm32-fmc2-ebi.yaml
>>
>> Changes in v3:
>> - NAND:
>> - rename labels used on errors
>> - add in the commit log the reason to increase FMC2_TIMEOUT_MS (patch 3)
>> - add Miquel reviewed-by tag (patches 2/4/5/9)
>> - EBI:
>> - move in memory folder
>> - merge MFD and BUS drivers to avoid a MFD driver
>> - bindings:
>> - pattern name has been modified
>> - vendor properties have been modified
>> - s/_/-/
>> - add unit suffix (-ns) on timing properties
>>
>> Christophe Kerello (10):
>> mtd: rawnand: stm32_fmc2: manage all errors cases at probe time
>> mtd: rawnand: stm32_fmc2: remove useless inline comments
>> mtd: rawnand: stm32_fmc2: use FMC2_TIMEOUT_MS for timeouts
>> mtd: rawnand: stm32_fmc2: cleanup
>> mtd: rawnand: stm32_fmc2: use FIELD_PREP/FIELD_GET macros
>> dt-bindings: mtd: update STM32 FMC2 NAND controller documentation
>> dt-bindings: memory-controller: add STM32 FMC2 EBI controller
>> documentation
>> memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver
>> mtd: rawnand: stm32_fmc2: use regmap APIs
>> mtd: rawnand: stm32_fmc2: get resources from parent node
>>
>> .../memory-controllers/st,stm32-fmc2-ebi.yaml | 261 +++++
>> .../bindings/mtd/st,stm32-fmc2-nand.yaml | 19 +-
>> drivers/memory/Kconfig | 10 +
>> drivers/memory/Makefile | 1 +
>> drivers/memory/stm32-fmc2-ebi.c | 1206 ++++++++++++++++++++
>> drivers/mtd/nand/raw/Kconfig | 1 +
>> drivers/mtd/nand/raw/stm32_fmc2_nand.c | 1176 ++++++++++---------
>> 7 files changed, 2061 insertions(+), 613 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
>> create mode 100644 drivers/memory/stm32-fmc2-ebi.c
>>
>
> I'm fine with the preparation patches 1-5 but the other patches need
> Rob's hack and probably more changes. If it's fine with you I can apply
> these patches for the next merge window and let more time to work on
> the last 5.
>
I am fine with your proposal.
Regards,
Christophe Kerello.
> Thanks,
> Miquèl
>
Hi Christophe,
Christophe Kerello <[email protected]> wrote on Mon, 11 May
2020 12:21:03 +0200:
> Hi Miquel,
>
> On 5/11/20 11:18 AM, Miquel Raynal wrote:
> > Hi Christophe,
> >
> > Christophe Kerello <[email protected]> wrote on Wed, 6 May 2020
> > 11:11:19 +0200:
> >
> >> FMC2 EBI support has been added. Common resources (registers base
> >> and clock) are now shared between the 2 drivers. It means that the
> >> common resources should now be found in the parent device when EBI
> >> node is available.
> >>
> >> Signed-off-by: Christophe Kerello <[email protected]>
> >> ---
> >
> > [...]
> >
> >> +
> >> +static bool stm32_fmc2_nfc_check_for_parent(struct platform_device *pdev)
> >> +{
> >> + u32 i;
> >> + int nb_resources = 0;
> >> +
> >> + /* Count the number of resources in reg property */
> >> + for (i = 0; i < pdev->num_resources; i++) {
> >> + struct resource *res = &pdev->resource[i];
> >> +
> >> + if (resource_type(res) == IORESOURCE_MEM)
> >> + nb_resources++;
> >> + }
> >> +
> >> + /* Each CS needs 3 resources defined (data, cmd and addr) */
> >> + if (nb_resources % 3)
> >> + return false;
> >> +
> >> + return true;
> >> +}
> >
> > This function looks fragile. Why not just checking the compatible
> > string of the parent node?
> >
>
> Yes, it is another way to check that we have an EBI parent node.
>
> In this implementation, I was checking the number of reg tuples.
> In case we have 6, it means that the register base address is defined in the parent node (EBI node).
> In case we have 7, it means that the register base address is defined in the current node (NFC node).
Yes, I understand what you are doing, but I kind of dislike the logic.
Relying on the number of reg tuples is something that can be done (I
used it myself one time), but I think this is more a hack that you do
when you have no other way to differentiate. I guess the proper way
would be to look at the parent's compatible. If it matches what you
expect, then you can store the dev->of_node->parent->dev somewhere in
your controller's structure and then use it to initialize the clock and
regmap. This way you don't have to move anything else in the probe path.
Thanks,
Miquèl
Hi Miquel,
On 5/11/20 1:59 PM, Miquel Raynal wrote:
> Hi Christophe,
>
> Christophe Kerello <[email protected]> wrote on Mon, 11 May
> 2020 12:21:03 +0200:
>
>> Hi Miquel,
>>
>> On 5/11/20 11:18 AM, Miquel Raynal wrote:
>>> Hi Christophe,
>>>
>>> Christophe Kerello <[email protected]> wrote on Wed, 6 May 2020
>>> 11:11:19 +0200:
>>>
>>>> FMC2 EBI support has been added. Common resources (registers base
>>>> and clock) are now shared between the 2 drivers. It means that the
>>>> common resources should now be found in the parent device when EBI
>>>> node is available.
>>>>
>>>> Signed-off-by: Christophe Kerello <[email protected]>
>>>> ---
>>>
>>> [...]
>>>
>>>> +
>>>> +static bool stm32_fmc2_nfc_check_for_parent(struct platform_device *pdev)
>>>> +{
>>>> + u32 i;
>>>> + int nb_resources = 0;
>>>> +
>>>> + /* Count the number of resources in reg property */
>>>> + for (i = 0; i < pdev->num_resources; i++) {
>>>> + struct resource *res = &pdev->resource[i];
>>>> +
>>>> + if (resource_type(res) == IORESOURCE_MEM)
>>>> + nb_resources++;
>>>> + }
>>>> +
>>>> + /* Each CS needs 3 resources defined (data, cmd and addr) */
>>>> + if (nb_resources % 3)
>>>> + return false;
>>>> +
>>>> + return true;
>>>> +}
>>>
>>> This function looks fragile. Why not just checking the compatible
>>> string of the parent node?
>>>
>>
>> Yes, it is another way to check that we have an EBI parent node.
>>
>> In this implementation, I was checking the number of reg tuples.
>> In case we have 6, it means that the register base address is defined in the parent node (EBI node).
>> In case we have 7, it means that the register base address is defined in the current node (NFC node).
>
> Yes, I understand what you are doing, but I kind of dislike the logic.
> Relying on the number of reg tuples is something that can be done (I
> used it myself one time), but I think this is more a hack that you do
> when you have no other way to differentiate. I guess the proper way
> would be to look at the parent's compatible. If it matches what you
> expect, then you can store the dev->of_node->parent->dev somewhere in
> your controller's structure and then use it to initialize the clock and
> regmap. This way you don't have to move anything else in the probe path.
>
OK, I will check the compatible string of the parent device using
of_device_is_compatible API in v5.
In case of the parent is found, I will add it in the structure of the
controller (dev_parent).
I will rely on this field only to get the common resources (the register
base address and the clock) in the NFC node or in the EBI node.
Regards,
Christophe Kerello.
>
> Thanks,
> Miquèl
>
Hi Christophe,
Christophe Kerello <[email protected]> wrote on Mon, 11 May
2020 14:47:09 +0200:
> Hi Miquel,
>
> On 5/11/20 1:59 PM, Miquel Raynal wrote:
> > Hi Christophe,
> >
> > Christophe Kerello <[email protected]> wrote on Mon, 11 May
> > 2020 12:21:03 +0200:
> >
> >> Hi Miquel,
> >>
> >> On 5/11/20 11:18 AM, Miquel Raynal wrote:
> >>> Hi Christophe,
> >>>
> >>> Christophe Kerello <[email protected]> wrote on Wed, 6 May 2020
> >>> 11:11:19 +0200:
> >>> >>>> FMC2 EBI support has been added. Common resources (registers base
> >>>> and clock) are now shared between the 2 drivers. It means that the
> >>>> common resources should now be found in the parent device when EBI
> >>>> node is available.
> >>>>
> >>>> Signed-off-by: Christophe Kerello <[email protected]>
> >>>> ---
> >>>
> >>> [...]
> >>> >>>> +
> >>>> +static bool stm32_fmc2_nfc_check_for_parent(struct platform_device *pdev)
> >>>> +{
> >>>> + u32 i;
> >>>> + int nb_resources = 0;
> >>>> +
> >>>> + /* Count the number of resources in reg property */
> >>>> + for (i = 0; i < pdev->num_resources; i++) {
> >>>> + struct resource *res = &pdev->resource[i];
> >>>> +
> >>>> + if (resource_type(res) == IORESOURCE_MEM)
> >>>> + nb_resources++;
> >>>> + }
> >>>> +
> >>>> + /* Each CS needs 3 resources defined (data, cmd and addr) */
> >>>> + if (nb_resources % 3)
> >>>> + return false;
> >>>> +
> >>>> + return true;
> >>>> +}
> >>>
> >>> This function looks fragile. Why not just checking the compatible
> >>> string of the parent node?
> >>> >>
> >> Yes, it is another way to check that we have an EBI parent node.
> >>
> >> In this implementation, I was checking the number of reg tuples.
> >> In case we have 6, it means that the register base address is defined in the parent node (EBI node).
> >> In case we have 7, it means that the register base address is defined in the current node (NFC node).
> >
> > Yes, I understand what you are doing, but I kind of dislike the logic.
> > Relying on the number of reg tuples is something that can be done (I
> > used it myself one time), but I think this is more a hack that you do
> > when you have no other way to differentiate. I guess the proper way
> > would be to look at the parent's compatible. If it matches what you
> > expect, then you can store the dev->of_node->parent->dev somewhere in
> > your controller's structure and then use it to initialize the clock and
> > regmap. This way you don't have to move anything else in the probe path.
> >
>
> OK, I will check the compatible string of the parent device using of_device_is_compatible API in v5.
> In case of the parent is found, I will add it in the structure of the controller (dev_parent).
> I will rely on this field only to get the common resources (the register base address and the clock) in the NFC node or in the EBI node.
I had something slightly different in mind: what about setting a
default value to this field as being the controller's device itself.
This way, once it is set to either the parent device or the device
itself, you can use it "blindly" in your devm_clk_get/regmap_init calls?
Hi Miquel,
On 5/11/20 2:58 PM, Miquel Raynal wrote:
> Hi Christophe,
>
> Christophe Kerello <[email protected]> wrote on Mon, 11 May
> 2020 14:47:09 +0200:
>
>> Hi Miquel,
>>
>> On 5/11/20 1:59 PM, Miquel Raynal wrote:
>>> Hi Christophe,
>>>
>>> Christophe Kerello <[email protected]> wrote on Mon, 11 May
>>> 2020 12:21:03 +0200:
>>>
>>>> Hi Miquel,
>>>>
>>>> On 5/11/20 11:18 AM, Miquel Raynal wrote:
>>>>> Hi Christophe,
>>>>>
>>>>> Christophe Kerello <[email protected]> wrote on Wed, 6 May 2020
>>>>> 11:11:19 +0200:
>>>>> >>>> FMC2 EBI support has been added. Common resources (registers base
>>>>>> and clock) are now shared between the 2 drivers. It means that the
>>>>>> common resources should now be found in the parent device when EBI
>>>>>> node is available.
>>>>>>
>>>>>> Signed-off-by: Christophe Kerello <[email protected]>
>>>>>> ---
>>>>>
>>>>> [...]
>>>>> >>>> +
>>>>>> +static bool stm32_fmc2_nfc_check_for_parent(struct platform_device *pdev)
>>>>>> +{
>>>>>> + u32 i;
>>>>>> + int nb_resources = 0;
>>>>>> +
>>>>>> + /* Count the number of resources in reg property */
>>>>>> + for (i = 0; i < pdev->num_resources; i++) {
>>>>>> + struct resource *res = &pdev->resource[i];
>>>>>> +
>>>>>> + if (resource_type(res) == IORESOURCE_MEM)
>>>>>> + nb_resources++;
>>>>>> + }
>>>>>> +
>>>>>> + /* Each CS needs 3 resources defined (data, cmd and addr) */
>>>>>> + if (nb_resources % 3)
>>>>>> + return false;
>>>>>> +
>>>>>> + return true;
>>>>>> +}
>>>>>
>>>>> This function looks fragile. Why not just checking the compatible
>>>>> string of the parent node?
>>>>> >>
>>>> Yes, it is another way to check that we have an EBI parent node.
>>>>
>>>> In this implementation, I was checking the number of reg tuples.
>>>> In case we have 6, it means that the register base address is defined in the parent node (EBI node).
>>>> In case we have 7, it means that the register base address is defined in the current node (NFC node).
>>>
>>> Yes, I understand what you are doing, but I kind of dislike the logic.
>>> Relying on the number of reg tuples is something that can be done (I
>>> used it myself one time), but I think this is more a hack that you do
>>> when you have no other way to differentiate. I guess the proper way
>>> would be to look at the parent's compatible. If it matches what you
>>> expect, then you can store the dev->of_node->parent->dev somewhere in
>>> your controller's structure and then use it to initialize the clock and
>>> regmap. This way you don't have to move anything else in the probe path.
>>>
>>
>> OK, I will check the compatible string of the parent device using of_device_is_compatible API in v5.
>> In case of the parent is found, I will add it in the structure of the controller (dev_parent).
>> I will rely on this field only to get the common resources (the register base address and the clock) in the NFC node or in the EBI node.
>
> I had something slightly different in mind: what about setting a
> default value to this field as being the controller's device itself.
> This way, once it is set to either the parent device or the device
> itself, you can use it "blindly" in your devm_clk_get/regmap_init calls?
>
I will try to explain what I have in mind.
I will add a new field in the structure of the controller (not called
dev_parent but cdev)
struct device *cdev;
Then, at probe time, this field will be assigned:
nfc->cdev = of_device_is_compatible(dev->parent->of_node, "bla bla") :
dev->parent ? dev;
For the clock, it will be
nfc->clk = devm_clk_get(nfc->cdev, NULL);
For the register base, I need to replace:
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
mmio = devm_ioremap_resource(dev, res);
if (IS_ERR(mmio))
return PTR_ERR(mmio);
nfc->regmap = devm_regmap_init_mmio(dev, mmio, &stm32_fmc2_regmap_cfg);
if (IS_ERR(nfc->regmap))
return PTR_ERR(nfc->regmap);
nfc->io_phys_addr = res->start;
With:
ret = of_address_to_resource(nfc->cdev->of_node, 0, &res);
if (ret)
return ret;
nfc->io_phys_addr = res.start;
nfc->regmap = device_node_to_regmap(nfc->cdev->of_node);
if (IS_ERR(nfc->regmap))
return PTR_ERR(nfc->regmap);
I expect that you were thinking about something like this proposal.
Regards,
Christophe Kerello.
Hi Christophe,
Christophe Kerello <[email protected]> wrote on Mon, 11 May
2020 16:19:47 +0200:
> Hi Miquel,
>
> On 5/11/20 2:58 PM, Miquel Raynal wrote:
> > Hi Christophe,
> >
> > Christophe Kerello <[email protected]> wrote on Mon, 11 May
> > 2020 14:47:09 +0200:
> >
> >> Hi Miquel,
> >>
> >> On 5/11/20 1:59 PM, Miquel Raynal wrote:
> >>> Hi Christophe,
> >>>
> >>> Christophe Kerello <[email protected]> wrote on Mon, 11 May
> >>> 2020 12:21:03 +0200:
> >>> >>>> Hi Miquel,
> >>>>
> >>>> On 5/11/20 11:18 AM, Miquel Raynal wrote:
> >>>>> Hi Christophe,
> >>>>>
> >>>>> Christophe Kerello <[email protected]> wrote on Wed, 6 May 2020
> >>>>> 11:11:19 +0200:
> >>>>> >>>> FMC2 EBI support has been added. Common resources (registers base
> >>>>>> and clock) are now shared between the 2 drivers. It means that the
> >>>>>> common resources should now be found in the parent device when EBI
> >>>>>> node is available.
> >>>>>>
> >>>>>> Signed-off-by: Christophe Kerello <[email protected]>
> >>>>>> ---
> >>>>>
> >>>>> [...]
> >>>>> >>>> +
> >>>>>> +static bool stm32_fmc2_nfc_check_for_parent(struct platform_device *pdev)
> >>>>>> +{
> >>>>>> + u32 i;
> >>>>>> + int nb_resources = 0;
> >>>>>> +
> >>>>>> + /* Count the number of resources in reg property */
> >>>>>> + for (i = 0; i < pdev->num_resources; i++) {
> >>>>>> + struct resource *res = &pdev->resource[i];
> >>>>>> +
> >>>>>> + if (resource_type(res) == IORESOURCE_MEM)
> >>>>>> + nb_resources++;
> >>>>>> + }
> >>>>>> +
> >>>>>> + /* Each CS needs 3 resources defined (data, cmd and addr) */
> >>>>>> + if (nb_resources % 3)
> >>>>>> + return false;
> >>>>>> +
> >>>>>> + return true;
> >>>>>> +}
> >>>>>
> >>>>> This function looks fragile. Why not just checking the compatible
> >>>>> string of the parent node?
> >>>>> >>
> >>>> Yes, it is another way to check that we have an EBI parent node.
> >>>>
> >>>> In this implementation, I was checking the number of reg tuples.
> >>>> In case we have 6, it means that the register base address is defined in the parent node (EBI node).
> >>>> In case we have 7, it means that the register base address is defined in the current node (NFC node).
> >>>
> >>> Yes, I understand what you are doing, but I kind of dislike the logic.
> >>> Relying on the number of reg tuples is something that can be done (I
> >>> used it myself one time), but I think this is more a hack that you do
> >>> when you have no other way to differentiate. I guess the proper way
> >>> would be to look at the parent's compatible. If it matches what you
> >>> expect, then you can store the dev->of_node->parent->dev somewhere in
> >>> your controller's structure and then use it to initialize the clock and
> >>> regmap. This way you don't have to move anything else in the probe path.
> >>> >>
> >> OK, I will check the compatible string of the parent device using of_device_is_compatible API in v5.
> >> In case of the parent is found, I will add it in the structure of the controller (dev_parent).
> >> I will rely on this field only to get the common resources (the register base address and the clock) in the NFC node or in the EBI node.
> >
> > I had something slightly different in mind: what about setting a
> > default value to this field as being the controller's device itself.
> > This way, once it is set to either the parent device or the device
> > itself, you can use it "blindly" in your devm_clk_get/regmap_init calls?
> >
>
> I will try to explain what I have in mind.
>
> I will add a new field in the structure of the controller (not called dev_parent but cdev)
> struct device *cdev;
>
> Then, at probe time, this field will be assigned:
> nfc->cdev = of_device_is_compatible(dev->parent->of_node, "bla bla") : dev->parent ? dev;
That's what I had in mind. Maybe you'll have to use
dev->of_node->parent though, I think they are not equivalent.
>
> For the clock, it will be
> nfc->clk = devm_clk_get(nfc->cdev, NULL);
>
> For the register base, I need to replace:
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> mmio = devm_ioremap_resource(dev, res);
> if (IS_ERR(mmio))
> return PTR_ERR(mmio);
>
> nfc->regmap = devm_regmap_init_mmio(dev, mmio, &stm32_fmc2_regmap_cfg);
> if (IS_ERR(nfc->regmap))
> return PTR_ERR(nfc->regmap);
>
> nfc->io_phys_addr = res->start;
>
> With:
>
> ret = of_address_to_resource(nfc->cdev->of_node, 0, &res);
> if (ret)
> return ret;
>
> nfc->io_phys_addr = res.start;
>
> nfc->regmap = device_node_to_regmap(nfc->cdev->of_node);
> if (IS_ERR(nfc->regmap))
> return PTR_ERR(nfc->regmap);
>
> I expect that you were thinking about something like this proposal.
This means the regmap has already been initialized, can you make sure
it is actually the case? What if the probe of the EBI block happens
next, or is deferred? (maybe you'll get a -EPROBE_DEFER, which is fine
then). Please try booting with the EBI node but without the EBI driver
and see if this is handled gracefully.
Hi Miquel,
On 5/11/20 4:45 PM, Miquel Raynal wrote:
> Hi Christophe,
>
> Christophe Kerello <[email protected]> wrote on Mon, 11 May
> 2020 16:19:47 +0200:
>
>> Hi Miquel,
>>
>> On 5/11/20 2:58 PM, Miquel Raynal wrote:
>>> Hi Christophe,
>>>
>>> Christophe Kerello <[email protected]> wrote on Mon, 11 May
>>> 2020 14:47:09 +0200:
>>>
>>>> Hi Miquel,
>>>>
>>>> On 5/11/20 1:59 PM, Miquel Raynal wrote:
>>>>> Hi Christophe,
>>>>>
>>>>> Christophe Kerello <[email protected]> wrote on Mon, 11 May
>>>>> 2020 12:21:03 +0200:
>>>>> >>>> Hi Miquel,
>>>>>>
>>>>>> On 5/11/20 11:18 AM, Miquel Raynal wrote:
>>>>>>> Hi Christophe,
>>>>>>>
>>>>>>> Christophe Kerello <[email protected]> wrote on Wed, 6 May 2020
>>>>>>> 11:11:19 +0200:
>>>>>>> >>>> FMC2 EBI support has been added. Common resources (registers base
>>>>>>>> and clock) are now shared between the 2 drivers. It means that the
>>>>>>>> common resources should now be found in the parent device when EBI
>>>>>>>> node is available.
>>>>>>>>
>>>>>>>> Signed-off-by: Christophe Kerello <[email protected]>
>>>>>>>> ---
>>>>>>>
>>>>>>> [...]
>>>>>>> >>>> +
>>>>>>>> +static bool stm32_fmc2_nfc_check_for_parent(struct platform_device *pdev)
>>>>>>>> +{
>>>>>>>> + u32 i;
>>>>>>>> + int nb_resources = 0;
>>>>>>>> +
>>>>>>>> + /* Count the number of resources in reg property */
>>>>>>>> + for (i = 0; i < pdev->num_resources; i++) {
>>>>>>>> + struct resource *res = &pdev->resource[i];
>>>>>>>> +
>>>>>>>> + if (resource_type(res) == IORESOURCE_MEM)
>>>>>>>> + nb_resources++;
>>>>>>>> + }
>>>>>>>> +
>>>>>>>> + /* Each CS needs 3 resources defined (data, cmd and addr) */
>>>>>>>> + if (nb_resources % 3)
>>>>>>>> + return false;
>>>>>>>> +
>>>>>>>> + return true;
>>>>>>>> +}
>>>>>>>
>>>>>>> This function looks fragile. Why not just checking the compatible
>>>>>>> string of the parent node?
>>>>>>> >>
>>>>>> Yes, it is another way to check that we have an EBI parent node.
>>>>>>
>>>>>> In this implementation, I was checking the number of reg tuples.
>>>>>> In case we have 6, it means that the register base address is defined in the parent node (EBI node).
>>>>>> In case we have 7, it means that the register base address is defined in the current node (NFC node).
>>>>>
>>>>> Yes, I understand what you are doing, but I kind of dislike the logic.
>>>>> Relying on the number of reg tuples is something that can be done (I
>>>>> used it myself one time), but I think this is more a hack that you do
>>>>> when you have no other way to differentiate. I guess the proper way
>>>>> would be to look at the parent's compatible. If it matches what you
>>>>> expect, then you can store the dev->of_node->parent->dev somewhere in
>>>>> your controller's structure and then use it to initialize the clock and
>>>>> regmap. This way you don't have to move anything else in the probe path.
>>>>> >>
>>>> OK, I will check the compatible string of the parent device using of_device_is_compatible API in v5.
>>>> In case of the parent is found, I will add it in the structure of the controller (dev_parent).
>>>> I will rely on this field only to get the common resources (the register base address and the clock) in the NFC node or in the EBI node.
>>>
>>> I had something slightly different in mind: what about setting a
>>> default value to this field as being the controller's device itself.
>>> This way, once it is set to either the parent device or the device
>>> itself, you can use it "blindly" in your devm_clk_get/regmap_init calls?
>>>
>>
>> I will try to explain what I have in mind.
>>
>> I will add a new field in the structure of the controller (not called dev_parent but cdev)
>> struct device *cdev;
>>
>> Then, at probe time, this field will be assigned:
>> nfc->cdev = of_device_is_compatible(dev->parent->of_node, "bla bla") : dev->parent ? dev;
>
> That's what I had in mind. Maybe you'll have to use
> dev->of_node->parent though, I think they are not equivalent.
>
>>
>> For the clock, it will be
>> nfc->clk = devm_clk_get(nfc->cdev, NULL);
>>
>> For the register base, I need to replace:
>> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> mmio = devm_ioremap_resource(dev, res);
>> if (IS_ERR(mmio))
>> return PTR_ERR(mmio);
>>
>> nfc->regmap = devm_regmap_init_mmio(dev, mmio, &stm32_fmc2_regmap_cfg);
>> if (IS_ERR(nfc->regmap))
>> return PTR_ERR(nfc->regmap);
>>
>> nfc->io_phys_addr = res->start;
>>
>> With:
>>
>> ret = of_address_to_resource(nfc->cdev->of_node, 0, &res);
>> if (ret)
>> return ret;
>>
>> nfc->io_phys_addr = res.start;
>>
>> nfc->regmap = device_node_to_regmap(nfc->cdev->of_node);
>> if (IS_ERR(nfc->regmap))
>> return PTR_ERR(nfc->regmap);
>>
>> I expect that you were thinking about something like this proposal.
>
> This means the regmap has already been initialized, can you make sure
> it is actually the case? What if the probe of the EBI block happens
> next, or is deferred? (maybe you'll get a -EPROBE_DEFER, which is fine
> then). Please try booting with the EBI node but without the EBI driver
> and see if this is handled gracefully.
>
In case we have an EBI node, the NFC node will be a child node of the
EBI node.
The EBI driver will first be probed, getting all its resources and then
it will populate all its children node (including the NFC node if this
one is enabled). If the EBI driver is deferred because of getting one of
its resources has failed, none of its children will be probed. They will
be probed later when the EBI driver will succeed to get all its
resources and will then populate all of its children.
In case we have the EBI node without its driver, none of its children
will be populated, so the NFC node will not be probed.
Here is an exemple of the bindings proposal:
fmc: memory-controller@58002000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "st,stm32mp1-fmc2-ebi";
reg = <0x58002000 0x1000>;
clocks = <&rcc FMC_K>;
resets = <&rcc FMC_R>;
ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
<1 0 0x64000000 0x04000000>, /* EBI CS 2 */
<2 0 0x68000000 0x04000000>, /* EBI CS 3 */
<3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
<4 0 0x80000000 0x10000000>; /* NAND */
psram@0,0 {
compatible = "mtd-ram";
reg = <0 0x00000000 0x100000>;
bank-width = <2>;
st,fmc2-ebi-cs-transaction-type = <1>;
st,fmc2-ebi-cs-address-setup-ns = <60>;
st,fmc2-ebi-cs-data-setup-ns = <30>;
st,fmc2-ebi-cs-bus-turnaround-ns = <5>;
};
nand-controller@4,0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "st,stm32mp15-fmc2";
reg = <4 0x00000000 0x1000>,
<4 0x08010000 0x1000>,
<4 0x08020000 0x1000>,
<4 0x01000000 0x1000>,
<4 0x09010000 0x1000>,
<4 0x09020000 0x1000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
<&mdma1 20 0x2 0x12000a08 0x0 0x0>,
<&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
dma-names = "tx", "rx", "ecc";
nand@0 {
reg = <0>;
nand-on-flash-bbt;
#address-cells = <1>;
#size-cells = <1>;
};
};
};
Regards,
Christophe Kerello.
Hi Christophe,
Christophe Kerello <[email protected]> wrote on Mon, 11 May
2020 19:02:51 +0200:
> Hi Miquel,
>
> On 5/11/20 4:45 PM, Miquel Raynal wrote:
> > Hi Christophe,
> >
> > Christophe Kerello <[email protected]> wrote on Mon, 11 May
> > 2020 16:19:47 +0200:
> >
> >> Hi Miquel,
> >>
> >> On 5/11/20 2:58 PM, Miquel Raynal wrote:
> >>> Hi Christophe,
> >>>
> >>> Christophe Kerello <[email protected]> wrote on Mon, 11 May
> >>> 2020 14:47:09 +0200:
> >>> >>>> Hi Miquel,
> >>>>
> >>>> On 5/11/20 1:59 PM, Miquel Raynal wrote:
> >>>>> Hi Christophe,
> >>>>>
> >>>>> Christophe Kerello <[email protected]> wrote on Mon, 11 May
> >>>>> 2020 12:21:03 +0200:
> >>>>> >>>> Hi Miquel,
> >>>>>>
> >>>>>> On 5/11/20 11:18 AM, Miquel Raynal wrote:
> >>>>>>> Hi Christophe,
> >>>>>>>
> >>>>>>> Christophe Kerello <[email protected]> wrote on Wed, 6 May 2020
> >>>>>>> 11:11:19 +0200:
> >>>>>>> >>>> FMC2 EBI support has been added. Common resources (registers base
> >>>>>>>> and clock) are now shared between the 2 drivers. It means that the
> >>>>>>>> common resources should now be found in the parent device when EBI
> >>>>>>>> node is available.
> >>>>>>>>
> >>>>>>>> Signed-off-by: Christophe Kerello <[email protected]>
> >>>>>>>> ---
> >>>>>>>
> >>>>>>> [...]
> >>>>>>> >>>> +
> >>>>>>>> +static bool stm32_fmc2_nfc_check_for_parent(struct platform_device *pdev)
> >>>>>>>> +{
> >>>>>>>> + u32 i;
> >>>>>>>> + int nb_resources = 0;
> >>>>>>>> +
> >>>>>>>> + /* Count the number of resources in reg property */
> >>>>>>>> + for (i = 0; i < pdev->num_resources; i++) {
> >>>>>>>> + struct resource *res = &pdev->resource[i];
> >>>>>>>> +
> >>>>>>>> + if (resource_type(res) == IORESOURCE_MEM)
> >>>>>>>> + nb_resources++;
> >>>>>>>> + }
> >>>>>>>> +
> >>>>>>>> + /* Each CS needs 3 resources defined (data, cmd and addr) */
> >>>>>>>> + if (nb_resources % 3)
> >>>>>>>> + return false;
> >>>>>>>> +
> >>>>>>>> + return true;
> >>>>>>>> +}
> >>>>>>>
> >>>>>>> This function looks fragile. Why not just checking the compatible
> >>>>>>> string of the parent node?
> >>>>>>> >>
> >>>>>> Yes, it is another way to check that we have an EBI parent node.
> >>>>>>
> >>>>>> In this implementation, I was checking the number of reg tuples.
> >>>>>> In case we have 6, it means that the register base address is defined in the parent node (EBI node).
> >>>>>> In case we have 7, it means that the register base address is defined in the current node (NFC node).
> >>>>>
> >>>>> Yes, I understand what you are doing, but I kind of dislike the logic.
> >>>>> Relying on the number of reg tuples is something that can be done (I
> >>>>> used it myself one time), but I think this is more a hack that you do
> >>>>> when you have no other way to differentiate. I guess the proper way
> >>>>> would be to look at the parent's compatible. If it matches what you
> >>>>> expect, then you can store the dev->of_node->parent->dev somewhere in
> >>>>> your controller's structure and then use it to initialize the clock and
> >>>>> regmap. This way you don't have to move anything else in the probe path.
> >>>>> >>
> >>>> OK, I will check the compatible string of the parent device using of_device_is_compatible API in v5.
> >>>> In case of the parent is found, I will add it in the structure of the controller (dev_parent).
> >>>> I will rely on this field only to get the common resources (the register base address and the clock) in the NFC node or in the EBI node.
> >>>
> >>> I had something slightly different in mind: what about setting a
> >>> default value to this field as being the controller's device itself.
> >>> This way, once it is set to either the parent device or the device
> >>> itself, you can use it "blindly" in your devm_clk_get/regmap_init calls?
> >>> >>
> >> I will try to explain what I have in mind.
> >>
> >> I will add a new field in the structure of the controller (not called dev_parent but cdev)
> >> struct device *cdev;
> >>
> >> Then, at probe time, this field will be assigned:
> >> nfc->cdev = of_device_is_compatible(dev->parent->of_node, "bla bla") : dev->parent ? dev;
> >
> > That's what I had in mind. Maybe you'll have to use
> > dev->of_node->parent though, I think they are not equivalent.
> >
> >>
> >> For the clock, it will be
> >> nfc->clk = devm_clk_get(nfc->cdev, NULL);
> >>
> >> For the register base, I need to replace:
> >> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >> mmio = devm_ioremap_resource(dev, res);
> >> if (IS_ERR(mmio))
> >> return PTR_ERR(mmio);
> >>
> >> nfc->regmap = devm_regmap_init_mmio(dev, mmio, &stm32_fmc2_regmap_cfg);
> >> if (IS_ERR(nfc->regmap))
> >> return PTR_ERR(nfc->regmap);
> >>
> >> nfc->io_phys_addr = res->start;
> >>
> >> With:
> >>
> >> ret = of_address_to_resource(nfc->cdev->of_node, 0, &res);
> >> if (ret)
> >> return ret;
> >>
> >> nfc->io_phys_addr = res.start;
> >>
> >> nfc->regmap = device_node_to_regmap(nfc->cdev->of_node);
> >> if (IS_ERR(nfc->regmap))
> >> return PTR_ERR(nfc->regmap);
> >>
> >> I expect that you were thinking about something like this proposal.
> >
> > This means the regmap has already been initialized, can you make sure
> > it is actually the case? What if the probe of the EBI block happens
> > next, or is deferred? (maybe you'll get a -EPROBE_DEFER, which is fine
> > then). Please try booting with the EBI node but without the EBI driver
> > and see if this is handled gracefully.
> >
>
> In case we have an EBI node, the NFC node will be a child node of the EBI node.
> The EBI driver will first be probed, getting all its resources and then it will populate all its children node (including the NFC node if this one is enabled). If the EBI driver is deferred because of getting one of its resources has failed, none of its children will be probed. They will be probed later when the EBI driver will succeed to get all its resources and will then populate all of its children.
>
Ok, I just reviewed it more in depth and I get it now, should be fine.
> In case we have the EBI node without its driver, none of its children will be populated, so the NFC node will not be probed.
>
> Here is an exemple of the bindings proposal:
> fmc: memory-controller@58002000 {
> #address-cells = <2>;
> #size-cells = <1>;
> compatible = "st,stm32mp1-fmc2-ebi";
> reg = <0x58002000 0x1000>;
> clocks = <&rcc FMC_K>;
> resets = <&rcc FMC_R>;
>
> ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
> <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
> <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
> <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
> <4 0 0x80000000 0x10000000>; /* NAND */
>
> psram@0,0 {
> compatible = "mtd-ram";
> reg = <0 0x00000000 0x100000>;
> bank-width = <2>;
>
> st,fmc2-ebi-cs-transaction-type = <1>;
> st,fmc2-ebi-cs-address-setup-ns = <60>;
> st,fmc2-ebi-cs-data-setup-ns = <30>;
> st,fmc2-ebi-cs-bus-turnaround-ns = <5>;
> };
>
> nand-controller@4,0 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "st,stm32mp15-fmc2";
> reg = <4 0x00000000 0x1000>,
> <4 0x08010000 0x1000>,
> <4 0x08020000 0x1000>,
> <4 0x01000000 0x1000>,
> <4 0x09010000 0x1000>,
> <4 0x09020000 0x1000>;
> interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
> <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
> <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
> dma-names = "tx", "rx", "ecc";
>
> nand@0 {
> reg = <0>;
> nand-on-flash-bbt;
> #address-cells = <1>;
> #size-cells = <1>;
> };
> };
> };
>
> Regards,
> Christophe Kerello.
Thanks,
Miquèl
On Wed, 2020-05-06 at 09:11:11 UTC, Christophe Kerello wrote:
> Remove inline comments that are useless since function label are
> self explanatory.
>
> Signed-off-by: Christophe Kerello <[email protected]>
> Reviewed-by: Miquel Raynal <[email protected]>
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.
Miquel
On Wed, 2020-05-06 at 09:11:12 UTC, Christophe Kerello wrote:
> This patch removes the constant FMC2_TIMEOUT_US.
> FMC2_TIMEOUT_MS will be used each time that we need to wait (except
> when the timeout value is set by the framework).
>
> It was seen, during stress tests with the sequencer in an overloaded
> system, that we could be close to 1 second, even if we never met this
> value. To be safe, FMC2_TIMEOUT_MS is set to 5 seconds.
>
> Signed-off-by: Christophe Kerello <[email protected]>
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.
Miquel
On Wed, 2020-05-06 at 09:11:14 UTC, Christophe Kerello wrote:
> This patch removes custom macros and uses FIELD_PREP and FIELD_GET macros.
>
> Signed-off-by: Christophe Kerello <[email protected]>
> Reviewed-by: Miquel Raynal <[email protected]>
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.
Miquel
Christophe Kerello <[email protected]> wrote on Wed, 6 May 2020
11:11:13 +0200:
> This patch renames functions and local variables.
> This cleanup is done to get all functions starting by stm32_fmc2_nfc
> in the FMC2 raw NAND driver when all functions will start by
> stm32_fmc2_ebi in the FMC2 EBI driver.
>
> Signed-off-by: Christophe Kerello <[email protected]>
> Reviewed-by: Miquel Raynal <[email protected]>
Applied to nand/next as well but for an unknown reason I had to do it
by hand because the patch would not apply.
Thanks,
Miquèl
Hi Miquel,
On 5/11/20 10:39 PM, Miquel Raynal wrote:
>
> Christophe Kerello <[email protected]> wrote on Wed, 6 May 2020
> 11:11:13 +0200:
>
>> This patch renames functions and local variables.
>> This cleanup is done to get all functions starting by stm32_fmc2_nfc
>> in the FMC2 raw NAND driver when all functions will start by
>> stm32_fmc2_ebi in the FMC2 EBI driver.
>>
>> Signed-off-by: Christophe Kerello <[email protected]>
>> Reviewed-by: Miquel Raynal <[email protected]>
>
> Applied to nand/next as well but for an unknown reason I had to do it
> by hand because the patch would not apply.
>
> Thanks,
> Miquèl
>
This is strange, I can apply this patch on my tree without any conflicts.
There is a compilation issue line 1301.
@@ -1302,44 +1298,45 @@ static void stm32_fmc2_write_data(struct
nand_chip *chip, const void *buf,
if (force_8bit && chip->options & NAND_BUSWIDTH_16)
/* Reconfigure bus width to 16-bit */
- stm32_fmc2_set_buswidth_16(fmc2, true);
+ stm32_fmc2_nfc_set_buswidth_16(nfc, true);
}
I will rebase on top of nand/next today to check that there is no issues
with the driver.
Regards,
Christophe Kerello.
Hi Christophe,
Christophe Kerello <[email protected]> wrote on Tue, 12 May
2020 08:49:54 +0200:
> Hi Miquel,
>
> On 5/11/20 10:39 PM, Miquel Raynal wrote:
> >
> > Christophe Kerello <[email protected]> wrote on Wed, 6 May 2020
> > 11:11:13 +0200:
> >
> >> This patch renames functions and local variables.
> >> This cleanup is done to get all functions starting by stm32_fmc2_nfc
> >> in the FMC2 raw NAND driver when all functions will start by
> >> stm32_fmc2_ebi in the FMC2 EBI driver.
> >>
> >> Signed-off-by: Christophe Kerello <[email protected]>
> >> Reviewed-by: Miquel Raynal <[email protected]>
> >
> > Applied to nand/next as well but for an unknown reason I had to do it
> > by hand because the patch would not apply.
> >
> > Thanks,
> > Miquèl
> >
> This is strange, I can apply this patch on my tree without any conflicts.
> There is a compilation issue line 1301.
>
> @@ -1302,44 +1298,45 @@ static void stm32_fmc2_write_data(struct nand_chip *chip, const void *buf,
>
> if (force_8bit && chip->options & NAND_BUSWIDTH_16)
> /* Reconfigure bus width to 16-bit */
> - stm32_fmc2_set_buswidth_16(fmc2, true);
> + stm32_fmc2_nfc_set_buswidth_16(nfc, true);
> }
>
> I will rebase on top of nand/next today to check that there is no issues with the driver.
I had to do some changes manually, maibe I missed this one, but I don't
remember touching this helper.
Anyway, I just dropped the two last patches of your series, please
reba&se now on nand/next and just resend patches 4 and 5.
Also, while at it, would you mind changing the commit title to
something more meaningful? "cleanup" is a bit vague and not very
accurate. Maybe something like "Cosmetic change to use nfc instead of
fmc2 where relevant".
Thanks,
Miquèl
On Wed, May 06, 2020 at 11:11:15AM +0200, Christophe Kerello wrote:
> These bindings can be used on SOCs where the FMC2 NAND controller is
> in standalone. In case that the FMC2 embeds 2 controllers (an external
> bus controller and a raw NAND controller), the register base and the
> clock will be defined in the parent node. It is the reason why the
> register base address and the clock are now optional.
>
> Signed-off-by: Christophe Kerello <[email protected]>
> ---
> .../devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml | 19 ++++++++++---------
> 1 file changed, 10 insertions(+), 9 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
> index b059267..68fac1a 100644
> --- a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
> +++ b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
> @@ -18,13 +18,15 @@ properties:
>
> reg:
> items:
> - - description: Registers
> + - description: Registers (optional)
The only thing that can be optional are the last entries. You have to do
a 'oneOf' with 6 entries and 7 entries.
And where's your new compatible string for this different h/w?
> - description: Chip select 0 data
> - description: Chip select 0 command
> - description: Chip select 0 address space
> - description: Chip select 1 data
> - description: Chip select 1 command
> - description: Chip select 1 address space
> + minItems: 6
> + maxItems: 7
>
> interrupts:
> maxItems: 1
> @@ -61,7 +63,6 @@ required:
> - compatible
> - reg
> - interrupts
> - - clocks
>
> examples:
> - |
> @@ -77,13 +78,13 @@ examples:
> <0x81000000 0x1000>,
> <0x89010000 0x1000>,
> <0x89020000 0x1000>;
> - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> - dmas = <&mdma1 20 0x10 0x12000a02 0x0 0x0>,
> - <&mdma1 20 0x10 0x12000a08 0x0 0x0>,
> - <&mdma1 21 0x10 0x12000a0a 0x0 0x0>;
> - dma-names = "tx", "rx", "ecc";
> - clocks = <&rcc FMC_K>;
> - resets = <&rcc FMC_R>;
> + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
> + <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
> + <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
> + dma-names = "tx", "rx", "ecc";
> + clocks = <&rcc FMC_K>;
> + resets = <&rcc FMC_R>;
> #address-cells = <1>;
> #size-cells = <0>;
>
> --
> 1.9.1
>
On Wed, May 06, 2020 at 11:11:16AM +0200, Christophe Kerello wrote:
> This patch adds the documentation of the device tree bindings for the STM32
> FMC2 EBI controller.
>
> Signed-off-by: Christophe Kerello <[email protected]>
> ---
> Changes in v4:
> - fix filename: st,stm32-fmc2-ebi.yaml
>
> Changes in v3:
> - pattern name has been modified
> - vendor properties have been modified
> - s/_/-/
> - add unit suffix (-ns) on timing properties
>
> .../memory-controllers/st,stm32-fmc2-ebi.yaml | 261 +++++++++++++++++++++
> 1 file changed, 261 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
>
> diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
> new file mode 100644
> index 0000000..bf130c3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
> @@ -0,0 +1,261 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectronics Flexible Memory Controller 2 (FMC2) Bindings
> +
> +description: |
> + The FMC2 functional block makes the interface with: synchronous and
> + asynchronous static devices (such as PSNOR, PSRAM or other memory-mapped
> + peripherals) and NAND flash memories.
> + Its main purposes are:
> + - to translate AXI transactions into the appropriate external device
> + protocol
> + - to meet the access time requirements of the external devices
> + All external devices share the addresses, data and control signals with the
> + controller. Each external device is accessed by means of a unique Chip
> + Select. The FMC2 performs only one access at a time to an external device.
> +
> +maintainers:
> + - Christophe Kerello <[email protected]>
> +
> +properties:
> + compatible:
> + const: st,stm32mp1-fmc2-ebi
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + resets:
> + maxItems: 1
> +
> + "#address-cells":
> + const: 2
> +
> + "#size-cells":
> + const: 1
> +
> + ranges:
> + description: |
> + Reflects the memory layout with four integer values per bank. Format:
> + <bank-number> 0 <address of the bank> <size>
> +
> +patternProperties:
> + "^.*@[0-4],[a-f0-9]+$":
> + type: object
> +
> + properties:
> + reg:
> + description: Bank number, base address and size of the device.
> +
> + st,fmc2-ebi-cs-transaction-type:
> + description: |
> + Select one of the transactions type supported
Indent should be 2 more than 'description'.
> + 0: Asynchronous mode 1 SRAM/FRAM.
> + 1: Asynchronous mode 1 PSRAM.
> + 2: Asynchronous mode A SRAM/FRAM.
> + 3: Asynchronous mode A PSRAM.
> + 4: Asynchronous mode 2 NOR.
> + 5: Asynchronous mode B NOR.
> + 6: Asynchronous mode C NOR.
> + 7: Asynchronous mode D NOR.
> + 8: Synchronous read synchronous write PSRAM.
> + 9: Synchronous read asynchronous write PSRAM.
> + 10: Synchronous read synchronous write NOR.
> + 11: Synchronous read asynchronous write NOR.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 11
> +
> + st,fmc2-ebi-cs-cclk-enable:
> + description: Continuous clock enable (first bank must be configured
> + in synchronous mode). The FMC_CLK is generated continuously
> + during asynchronous and synchronous access. By default, the
> + FMC_CLK is only generated during synchronous access.
Indent 2 more than 'description'. You can run this through yaml-format
in dtschema repo and it will re-flow everything for you.
With these fixed,
Reviewed-by: Rob Herring <[email protected]>
> + $ref: /schemas/types.yaml#/definitions/flag
> +
> + st,fmc2-ebi-cs-mux-enable:
> + description: Address/Data multiplexed on databus (valid only with
> + NOR and PSRAM transactions type). By default, Address/Data
> + are not multiplexed.
> + $ref: /schemas/types.yaml#/definitions/flag
> +
> + st,fmc2-ebi-cs-buswidth:
> + description: Data bus width
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 8, 16 ]
> + default: 16
> +
> + st,fmc2-ebi-cs-waitpol-high:
> + description: Wait signal polarity (NWAIT signal active high).
> + By default, NWAIT is active low.
> + $ref: /schemas/types.yaml#/definitions/flag
> +
> + st,fmc2-ebi-cs-waitcfg-enable:
> + description: The NWAIT signal indicates wheither the data from the
> + device are valid or if a wait state must be inserted when
> + accessing the device in synchronous mode. By default, the
> + NWAIT signal is active one data cycle before wait state.
> + $ref: /schemas/types.yaml#/definitions/flag
> +
> + st,fmc2-ebi-cs-wait-enable:
> + description: The NWAIT signal is enabled (its level is taken into
> + account after the programmed latency period to insert wait
> + states if asserted). By default, the NWAIT signal is
> + disabled.
> + $ref: /schemas/types.yaml#/definitions/flag
> +
> + st,fmc2-ebi-cs-asyncwait-enable:
> + description: The NWAIT signal is taken into account during asynchronous
> + transactions. By default, the NWAIT signal is not taken
> + into account during asynchronous transactions.
> + $ref: /schemas/types.yaml#/definitions/flag
> +
> + st,fmc2-ebi-cs-cpsize:
> + description: CRAM page size. The controller splits the burst access
> + when the memory page is reached. By default, no burst
> + split when crossing page boundary.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 0, 128, 256, 512, 1024 ]
> + default: 0
> +
> + st,fmc2-ebi-cs-byte-lane-setup-ns:
> + description: This property configures the byte lane setup timing
> + defined in nanoseconds from NBLx low to Chip Select NEx
> + low.
> +
> + st,fmc2-ebi-cs-address-setup-ns:
> + description: This property defines the duration of the address setup
> + phase in nanoseconds used for asynchronous read/write
> + transactions.
> +
> + st,fmc2-ebi-cs-address-hold-ns:
> + description: This property defines the duration of the address hold
> + phase in nanoseconds used for asynchronous multiplexed
> + read/write transactions.
> +
> + st,fmc2-ebi-cs-data-setup-ns:
> + description: This property defines the duration of the data setup phase
> + in nanoseconds used for asynchronous read/write
> + transactions.
> +
> + st,fmc2-ebi-cs-bus-turnaround-ns:
> + description: This property defines the delay in nanoseconds between the
> + end of current read/write transaction and the next
> + transaction.
> +
> + st,fmc2-ebi-cs-data-hold-ns:
> + description: This property defines the duration of the data hold phase
> + in nanoseconds used for asynchronous read/write
> + transactions.
> +
> + st,fmc2-ebi-cs-clk-period-ns:
> + description: This property defines the FMC_CLK output signal period in
> + nanoseconds.
> +
> + st,fmc2-ebi-cs-data-latency-ns:
> + description: This property defines the data latency before reading or
> + writing the first data in nanoseconds.
> +
> + st,fmc2_ebi-cs-write-address-setup-ns:
> + description: This property defines the duration of the address setup
> + phase in nanoseconds used for asynchronous write
> + transactions.
> +
> + st,fmc2-ebi-cs-write-address-hold-ns:
> + description: This property defines the duration of the address hold
> + phase in nanoseconds used for asynchronous multiplexed
> + write transactions.
> +
> + st,fmc2-ebi-cs-write-data-setup-ns:
> + description: This property defines the duration of the data setup
> + phase in nanoseconds used for asynchronous write
> + transactions.
> +
> + st,fmc2-ebi-cs-write-bus-turnaround-ns:
> + description: This property defines the delay between the end of current
> + write transaction and the next transaction in nanoseconds.
> +
> + st,fmc2-ebi-cs-write-data-hold-ns:
> + description: This property defines the duration of the data hold phase
> + in nanoseconds used for asynchronous write transactions.
> +
> + st,fmc2-ebi-cs-max-low-pulse-ns:
> + description: This property defines the maximum chip select low pulse
> + duration in nanoseconds for synchronous transactions. When
> + this timing reaches 0, the controller splits the current
> + access, toggles NE to allow device refresh and restarts a
> + new access.
> +
> + required:
> + - reg
> +
> +required:
> + - "#address-cells"
> + - "#size-cells"
> + - compatible
> + - reg
> + - clocks
> + - ranges
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/stm32mp1-clks.h>
> + #include <dt-bindings/reset/stm32mp1-resets.h>
> + memory-controller@58002000 {
> + #address-cells = <2>;
> + #size-cells = <1>;
> + compatible = "st,stm32mp1-fmc2-ebi";
> + reg = <0x58002000 0x1000>;
> + clocks = <&rcc FMC_K>;
> + resets = <&rcc FMC_R>;
> +
> + ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
> + <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
> + <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
> + <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
> + <4 0 0x80000000 0x10000000>; /* NAND */
> +
> + psram@0,0 {
> + compatible = "mtd-ram";
> + reg = <0 0x00000000 0x100000>;
> + bank-width = <2>;
> +
> + st,fmc2-ebi-cs-transaction-type = <1>;
> + st,fmc2-ebi-cs-address-setup-ns = <60>;
> + st,fmc2-ebi-cs-data-setup-ns = <30>;
> + st,fmc2-ebi-cs-bus-turnaround-ns = <5>;
> + };
> +
> + nand-controller@4,0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "st,stm32mp15-fmc2";
> + reg = <4 0x00000000 0x1000>,
> + <4 0x08010000 0x1000>,
> + <4 0x08020000 0x1000>,
> + <4 0x01000000 0x1000>,
> + <4 0x09010000 0x1000>,
> + <4 0x09020000 0x1000>;
> + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
> + <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
> + <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
> + dma-names = "tx", "rx", "ecc";
> +
> + nand@0 {
> + reg = <0>;
> + nand-on-flash-bbt;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> + };
> + };
> +
> +...
> --
> 1.9.1
>
Hi Rob,
On 5/14/20 5:00 PM, Rob Herring wrote:
> On Wed, May 06, 2020 at 11:11:15AM +0200, Christophe Kerello wrote:
>> These bindings can be used on SOCs where the FMC2 NAND controller is
>> in standalone. In case that the FMC2 embeds 2 controllers (an external
>> bus controller and a raw NAND controller), the register base and the
>> clock will be defined in the parent node. It is the reason why the
>> register base address and the clock are now optional.
>>
>> Signed-off-by: Christophe Kerello <[email protected]>
>> ---
>> .../devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml | 19 ++++++++++---------
>> 1 file changed, 10 insertions(+), 9 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
>> index b059267..68fac1a 100644
>> --- a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
>> +++ b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
>> @@ -18,13 +18,15 @@ properties:
>>
>> reg:
>> items:
>> - - description: Registers
>> + - description: Registers (optional)
>
> The only thing that can be optional are the last entries. You have to do
> a 'oneOf' with 6 entries and 7 entries.
Ok, so the way to describe the reg property in my case should be:
reg:
oneOf:
- description: FMC2 embeds the NFC controller in standalone.
items:
- description: Registers
- description: Chip select 0 data
- description: Chip select 0 command
- description: Chip select 0 address space
- description: Chip select 1 data
- description: Chip select 1 command
- description: Chip select 1 address space
- description: FMC2 embeds the NFC controller and the EBI
controller.
items:
- description: Chip select 0 data
- description: Chip select 0 command
- description: Chip select 0 address space
- description: Chip select 1 data
- description: Chip select 1 command
- description: Chip select 1 address space
>
> And where's your new compatible string for this different h/w?
From NFC controller point of view, it is the same HW.
In the case that we have 2 controllers embedded, the register base is
shared.
The NFC driver will check at probe time the compatible string of its
parent node.
In case that it is "st,stm32mp1-fmc2-ebi", then the driver will find the
register base in the parent node (EBI node), otherwise it will find it
in the NFC node.
Is it better to have 2 compatible strings (one for each reg description)
than checking the parent's compatible string and have only one
compatible string?
Regards,
Christophe Kerello.
>
>> - description: Chip select 0 data
>> - description: Chip select 0 command
>> - description: Chip select 0 address space
>> - description: Chip select 1 data
>> - description: Chip select 1 command
>> - description: Chip select 1 address space
>> + minItems: 6
>> + maxItems: 7
>>
>> interrupts:
>> maxItems: 1
>> @@ -61,7 +63,6 @@ required:
>> - compatible
>> - reg
>> - interrupts
>> - - clocks
>>
>> examples:
>> - |
>> @@ -77,13 +78,13 @@ examples:
>> <0x81000000 0x1000>,
>> <0x89010000 0x1000>,
>> <0x89020000 0x1000>;
>> - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
>> - dmas = <&mdma1 20 0x10 0x12000a02 0x0 0x0>,
>> - <&mdma1 20 0x10 0x12000a08 0x0 0x0>,
>> - <&mdma1 21 0x10 0x12000a0a 0x0 0x0>;
>> - dma-names = "tx", "rx", "ecc";
>> - clocks = <&rcc FMC_K>;
>> - resets = <&rcc FMC_R>;
>> + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
>> + dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
>> + <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
>> + <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
>> + dma-names = "tx", "rx", "ecc";
>> + clocks = <&rcc FMC_K>;
>> + resets = <&rcc FMC_R>;
>> #address-cells = <1>;
>> #size-cells = <0>;
>>
>> --
>> 1.9.1
>>
Hi Rob,
On 5/14/20 5:07 PM, Rob Herring wrote:
> On Wed, May 06, 2020 at 11:11:16AM +0200, Christophe Kerello wrote:
>> This patch adds the documentation of the device tree bindings for the STM32
>> FMC2 EBI controller.
>>
>> Signed-off-by: Christophe Kerello <[email protected]>
>> ---
>> Changes in v4:
>> - fix filename: st,stm32-fmc2-ebi.yaml
>>
>> Changes in v3:
>> - pattern name has been modified
>> - vendor properties have been modified
>> - s/_/-/
>> - add unit suffix (-ns) on timing properties
>>
>> .../memory-controllers/st,stm32-fmc2-ebi.yaml | 261 +++++++++++++++++++++
>> 1 file changed, 261 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
>> new file mode 100644
>> index 0000000..bf130c3
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
>> @@ -0,0 +1,261 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: STMicroelectronics Flexible Memory Controller 2 (FMC2) Bindings
>> +
>> +description: |
>> + The FMC2 functional block makes the interface with: synchronous and
>> + asynchronous static devices (such as PSNOR, PSRAM or other memory-mapped
>> + peripherals) and NAND flash memories.
>> + Its main purposes are:
>> + - to translate AXI transactions into the appropriate external device
>> + protocol
>> + - to meet the access time requirements of the external devices
>> + All external devices share the addresses, data and control signals with the
>> + controller. Each external device is accessed by means of a unique Chip
>> + Select. The FMC2 performs only one access at a time to an external device.
>> +
>> +maintainers:
>> + - Christophe Kerello <[email protected]>
>> +
>> +properties:
>> + compatible:
>> + const: st,stm32mp1-fmc2-ebi
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + clocks:
>> + maxItems: 1
>> +
>> + resets:
>> + maxItems: 1
>> +
>> + "#address-cells":
>> + const: 2
>> +
>> + "#size-cells":
>> + const: 1
>> +
>> + ranges:
>> + description: |
>> + Reflects the memory layout with four integer values per bank. Format:
>> + <bank-number> 0 <address of the bank> <size>
>> +
>> +patternProperties:
>> + "^.*@[0-4],[a-f0-9]+$":
>> + type: object
>> +
>> + properties:
>> + reg:
>> + description: Bank number, base address and size of the device.
>> +
>> + st,fmc2-ebi-cs-transaction-type:
>> + description: |
>> + Select one of the transactions type supported
>
> Indent should be 2 more than 'description'.
Ok, it will be part of v5.
>
>> + 0: Asynchronous mode 1 SRAM/FRAM.
>> + 1: Asynchronous mode 1 PSRAM.
>> + 2: Asynchronous mode A SRAM/FRAM.
>> + 3: Asynchronous mode A PSRAM.
>> + 4: Asynchronous mode 2 NOR.
>> + 5: Asynchronous mode B NOR.
>> + 6: Asynchronous mode C NOR.
>> + 7: Asynchronous mode D NOR.
>> + 8: Synchronous read synchronous write PSRAM.
>> + 9: Synchronous read asynchronous write PSRAM.
>> + 10: Synchronous read synchronous write NOR.
>> + 11: Synchronous read asynchronous write NOR.
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + minimum: 0
>> + maximum: 11
>> +
>> + st,fmc2-ebi-cs-cclk-enable:
>> + description: Continuous clock enable (first bank must be configured
>> + in synchronous mode). The FMC_CLK is generated continuously
>> + during asynchronous and synchronous access. By default, the
>> + FMC_CLK is only generated during synchronous access.
>
> Indent 2 more than 'description'. You can run this through yaml-format
> in dtschema repo and it will re-flow everything for you.
Ok, it will be part of v5.
Regards,
Christophe Kerello.
>
> With these fixed,
>
> Reviewed-by: Rob Herring <[email protected]>
>
>
>> + $ref: /schemas/types.yaml#/definitions/flag
>> +
>> + st,fmc2-ebi-cs-mux-enable:
>> + description: Address/Data multiplexed on databus (valid only with
>> + NOR and PSRAM transactions type). By default, Address/Data
>> + are not multiplexed.
>> + $ref: /schemas/types.yaml#/definitions/flag
>> +
>> + st,fmc2-ebi-cs-buswidth:
>> + description: Data bus width
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + enum: [ 8, 16 ]
>> + default: 16
>> +
>> + st,fmc2-ebi-cs-waitpol-high:
>> + description: Wait signal polarity (NWAIT signal active high).
>> + By default, NWAIT is active low.
>> + $ref: /schemas/types.yaml#/definitions/flag
>> +
>> + st,fmc2-ebi-cs-waitcfg-enable:
>> + description: The NWAIT signal indicates wheither the data from the
>> + device are valid or if a wait state must be inserted when
>> + accessing the device in synchronous mode. By default, the
>> + NWAIT signal is active one data cycle before wait state.
>> + $ref: /schemas/types.yaml#/definitions/flag
>> +
>> + st,fmc2-ebi-cs-wait-enable:
>> + description: The NWAIT signal is enabled (its level is taken into
>> + account after the programmed latency period to insert wait
>> + states if asserted). By default, the NWAIT signal is
>> + disabled.
>> + $ref: /schemas/types.yaml#/definitions/flag
>> +
>> + st,fmc2-ebi-cs-asyncwait-enable:
>> + description: The NWAIT signal is taken into account during asynchronous
>> + transactions. By default, the NWAIT signal is not taken
>> + into account during asynchronous transactions.
>> + $ref: /schemas/types.yaml#/definitions/flag
>> +
>> + st,fmc2-ebi-cs-cpsize:
>> + description: CRAM page size. The controller splits the burst access
>> + when the memory page is reached. By default, no burst
>> + split when crossing page boundary.
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + enum: [ 0, 128, 256, 512, 1024 ]
>> + default: 0
>> +
>> + st,fmc2-ebi-cs-byte-lane-setup-ns:
>> + description: This property configures the byte lane setup timing
>> + defined in nanoseconds from NBLx low to Chip Select NEx
>> + low.
>> +
>> + st,fmc2-ebi-cs-address-setup-ns:
>> + description: This property defines the duration of the address setup
>> + phase in nanoseconds used for asynchronous read/write
>> + transactions.
>> +
>> + st,fmc2-ebi-cs-address-hold-ns:
>> + description: This property defines the duration of the address hold
>> + phase in nanoseconds used for asynchronous multiplexed
>> + read/write transactions.
>> +
>> + st,fmc2-ebi-cs-data-setup-ns:
>> + description: This property defines the duration of the data setup phase
>> + in nanoseconds used for asynchronous read/write
>> + transactions.
>> +
>> + st,fmc2-ebi-cs-bus-turnaround-ns:
>> + description: This property defines the delay in nanoseconds between the
>> + end of current read/write transaction and the next
>> + transaction.
>> +
>> + st,fmc2-ebi-cs-data-hold-ns:
>> + description: This property defines the duration of the data hold phase
>> + in nanoseconds used for asynchronous read/write
>> + transactions.
>> +
>> + st,fmc2-ebi-cs-clk-period-ns:
>> + description: This property defines the FMC_CLK output signal period in
>> + nanoseconds.
>> +
>> + st,fmc2-ebi-cs-data-latency-ns:
>> + description: This property defines the data latency before reading or
>> + writing the first data in nanoseconds.
>> +
>> + st,fmc2_ebi-cs-write-address-setup-ns:
>> + description: This property defines the duration of the address setup
>> + phase in nanoseconds used for asynchronous write
>> + transactions.
>> +
>> + st,fmc2-ebi-cs-write-address-hold-ns:
>> + description: This property defines the duration of the address hold
>> + phase in nanoseconds used for asynchronous multiplexed
>> + write transactions.
>> +
>> + st,fmc2-ebi-cs-write-data-setup-ns:
>> + description: This property defines the duration of the data setup
>> + phase in nanoseconds used for asynchronous write
>> + transactions.
>> +
>> + st,fmc2-ebi-cs-write-bus-turnaround-ns:
>> + description: This property defines the delay between the end of current
>> + write transaction and the next transaction in nanoseconds.
>> +
>> + st,fmc2-ebi-cs-write-data-hold-ns:
>> + description: This property defines the duration of the data hold phase
>> + in nanoseconds used for asynchronous write transactions.
>> +
>> + st,fmc2-ebi-cs-max-low-pulse-ns:
>> + description: This property defines the maximum chip select low pulse
>> + duration in nanoseconds for synchronous transactions. When
>> + this timing reaches 0, the controller splits the current
>> + access, toggles NE to allow device refresh and restarts a
>> + new access.
>> +
>> + required:
>> + - reg
>> +
>> +required:
>> + - "#address-cells"
>> + - "#size-cells"
>> + - compatible
>> + - reg
>> + - clocks
>> + - ranges
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/interrupt-controller/arm-gic.h>
>> + #include <dt-bindings/clock/stm32mp1-clks.h>
>> + #include <dt-bindings/reset/stm32mp1-resets.h>
>> + memory-controller@58002000 {
>> + #address-cells = <2>;
>> + #size-cells = <1>;
>> + compatible = "st,stm32mp1-fmc2-ebi";
>> + reg = <0x58002000 0x1000>;
>> + clocks = <&rcc FMC_K>;
>> + resets = <&rcc FMC_R>;
>> +
>> + ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
>> + <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
>> + <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
>> + <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
>> + <4 0 0x80000000 0x10000000>; /* NAND */
>> +
>> + psram@0,0 {
>> + compatible = "mtd-ram";
>> + reg = <0 0x00000000 0x100000>;
>> + bank-width = <2>;
>> +
>> + st,fmc2-ebi-cs-transaction-type = <1>;
>> + st,fmc2-ebi-cs-address-setup-ns = <60>;
>> + st,fmc2-ebi-cs-data-setup-ns = <30>;
>> + st,fmc2-ebi-cs-bus-turnaround-ns = <5>;
>> + };
>> +
>> + nand-controller@4,0 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "st,stm32mp15-fmc2";
>> + reg = <4 0x00000000 0x1000>,
>> + <4 0x08010000 0x1000>,
>> + <4 0x08020000 0x1000>,
>> + <4 0x01000000 0x1000>,
>> + <4 0x09010000 0x1000>,
>> + <4 0x09020000 0x1000>;
>> + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
>> + dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
>> + <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
>> + <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
>> + dma-names = "tx", "rx", "ecc";
>> +
>> + nand@0 {
>> + reg = <0>;
>> + nand-on-flash-bbt;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + };
>> + };
>> + };
>> +
>> +...
>> --
>> 1.9.1
>>
On Thu, May 14, 2020 at 11:35 AM Christophe Kerello
<[email protected]> wrote:
>
> Hi Rob,
>
> On 5/14/20 5:00 PM, Rob Herring wrote:
> > On Wed, May 06, 2020 at 11:11:15AM +0200, Christophe Kerello wrote:
> >> These bindings can be used on SOCs where the FMC2 NAND controller is
> >> in standalone. In case that the FMC2 embeds 2 controllers (an external
> >> bus controller and a raw NAND controller), the register base and the
> >> clock will be defined in the parent node. It is the reason why the
> >> register base address and the clock are now optional.
> >>
> >> Signed-off-by: Christophe Kerello <[email protected]>
> >> ---
> >> .../devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml | 19 ++++++++++---------
> >> 1 file changed, 10 insertions(+), 9 deletions(-)
> >>
> >> diff --git a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
> >> index b059267..68fac1a 100644
> >> --- a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
> >> +++ b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
> >> @@ -18,13 +18,15 @@ properties:
> >>
> >> reg:
> >> items:
> >> - - description: Registers
> >> + - description: Registers (optional)
> >
> > The only thing that can be optional are the last entries. You have to do
> > a 'oneOf' with 6 entries and 7 entries.
>
> Ok, so the way to describe the reg property in my case should be:
> reg:
> oneOf:
> - description: FMC2 embeds the NFC controller in standalone.
> items:
> - description: Registers
> - description: Chip select 0 data
> - description: Chip select 0 command
> - description: Chip select 0 address space
> - description: Chip select 1 data
> - description: Chip select 1 command
> - description: Chip select 1 address space
>
> - description: FMC2 embeds the NFC controller and the EBI
> controller.
> items:
> - description: Chip select 0 data
> - description: Chip select 0 command
> - description: Chip select 0 address space
> - description: Chip select 1 data
> - description: Chip select 1 command
> - description: Chip select 1 address space
>
> >
> > And where's your new compatible string for this different h/w?
>
> From NFC controller point of view, it is the same HW.
That's what everyone says until they have some quirk or integration
difference to handle.
> In the case that we have 2 controllers embedded, the register base is
> shared.
> The NFC driver will check at probe time the compatible string of its
> parent node.
> In case that it is "st,stm32mp1-fmc2-ebi", then the driver will find the
> register base in the parent node (EBI node), otherwise it will find it
> in the NFC node.
> Is it better to have 2 compatible strings (one for each reg description)
> than checking the parent's compatible string and have only one
> compatible string?
Why not just put the register base into the child node too? While
overlapping 'reg' regions for siblings is bad, it's fine for child
nodes. I guess since there are chip selects for the child nodes that
may not work here.
It doesn't hurt to have another compatible. You can always make the
old one a fallback. With different compatibles you can make sure reg
has the right number of entries.
Rob
Hi Rob,
On 5/14/20 7:55 PM, Rob Herring wrote:
> On Thu, May 14, 2020 at 11:35 AM Christophe Kerello
> <[email protected]> wrote:
>>
>> Hi Rob,
>>
>> On 5/14/20 5:00 PM, Rob Herring wrote:
>>> On Wed, May 06, 2020 at 11:11:15AM +0200, Christophe Kerello wrote:
>>>> These bindings can be used on SOCs where the FMC2 NAND controller is
>>>> in standalone. In case that the FMC2 embeds 2 controllers (an external
>>>> bus controller and a raw NAND controller), the register base and the
>>>> clock will be defined in the parent node. It is the reason why the
>>>> register base address and the clock are now optional.
>>>>
>>>> Signed-off-by: Christophe Kerello <[email protected]>
>>>> ---
>>>> .../devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml | 19 ++++++++++---------
>>>> 1 file changed, 10 insertions(+), 9 deletions(-)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
>>>> index b059267..68fac1a 100644
>>>> --- a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
>>>> +++ b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
>>>> @@ -18,13 +18,15 @@ properties:
>>>>
>>>> reg:
>>>> items:
>>>> - - description: Registers
>>>> + - description: Registers (optional)
>>>
>>> The only thing that can be optional are the last entries. You have to do
>>> a 'oneOf' with 6 entries and 7 entries.
>>
>> Ok, so the way to describe the reg property in my case should be:
>> reg:
>> oneOf:
>> - description: FMC2 embeds the NFC controller in standalone.
>> items:
>> - description: Registers
>> - description: Chip select 0 data
>> - description: Chip select 0 command
>> - description: Chip select 0 address space
>> - description: Chip select 1 data
>> - description: Chip select 1 command
>> - description: Chip select 1 address space
>>
>> - description: FMC2 embeds the NFC controller and the EBI
>> controller.
>> items:
>> - description: Chip select 0 data
>> - description: Chip select 0 command
>> - description: Chip select 0 address space
>> - description: Chip select 1 data
>> - description: Chip select 1 command
>> - description: Chip select 1 address space
>>
>>>
>>> And where's your new compatible string for this different h/w?
>>
>> From NFC controller point of view, it is the same HW.
>
> That's what everyone says until they have some quirk or integration
> difference to handle.
>
>> In the case that we have 2 controllers embedded, the register base is
>> shared.
>> The NFC driver will check at probe time the compatible string of its
>> parent node.
>> In case that it is "st,stm32mp1-fmc2-ebi", then the driver will find the
>> register base in the parent node (EBI node), otherwise it will find it
>> in the NFC node.
>> Is it better to have 2 compatible strings (one for each reg description)
>> than checking the parent's compatible string and have only one
>> compatible string?
>
> Why not just put the register base into the child node too? While
> overlapping 'reg' regions for siblings is bad, it's fine for child
> nodes. I guess since there are chip selects for the child nodes that
> may not work here.
>
> It doesn't hurt to have another compatible. You can always make the
> old one a fallback. With different compatibles you can make sure reg
> has the right number of entries.
>
> Rob
>
I will add a new compatible string to handle the reg property.
It will be part of v5.
Regards,
Christophe Kerello.