[email protected], [email protected], [email protected], [email protected],
Bcc: [email protected]
Subject: Re: [PATCH] mm/compaction: Fix the incorrect hole in
fast_isolate_freepages()
Reply-To:
In-Reply-To: <[email protected]>
On 05/26/20 at 01:49pm, David Hildenbrand wrote:
> On 26.05.20 13:32, Mike Rapoport wrote:
> > Hello Baoquan,
> >
> > On Tue, May 26, 2020 at 04:45:43PM +0800, Baoquan He wrote:
> >> On 05/22/20 at 05:20pm, Mike Rapoport wrote:
> >>> Hello Baoquan,
> >>>
> >>> On Fri, May 22, 2020 at 03:25:24PM +0800, Baoquan He wrote:
> >>>> On 05/22/20 at 03:01pm, Baoquan He wrote:
> >>>>>
> >>>>> So let's add these unavailable ranges into memblock and reserve them
> >>>>> in init_unavailable_range() instead. With this change, they will be added
> >>>>> into appropriate node and zone in memmap_init(), and initialized in
> >>>>> reserve_bootmem_region() just like any other memblock reserved regions.
> >>>>
> >>>> Seems this is not right. They can't get nid in init_unavailable_range().
> >>>> Adding e820 ranges may let them get nid. But the hole range won't be
> >>>> added to memblock, and still has the issue.
> >>>>
> >>>> Nack this one for now, still considering.
> >>>
> >>> Why won't we add the e820 reserved ranges to memblock.memory during
> >>> early boot as I suggested?
> >>>
> >>> diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
> >>> index c5399e80c59c..b0940c618ed9 100644
> >>> --- a/arch/x86/kernel/e820.c
> >>> +++ b/arch/x86/kernel/e820.c
> >>> @@ -1301,8 +1301,11 @@ void __init e820__memblock_setup(void)
> >>> if (end != (resource_size_t)end)
> >>> continue;
> >>>
> >>> - if (entry->type == E820_TYPE_SOFT_RESERVED)
> >>> + if (entry->type == E820_TYPE_SOFT_RESERVED ||
> >>> + entry->type == E820_TYPE_RESERVED) {
> >>> + memblock_add(entry->addr, entry->size);
> >>> memblock_reserve(entry->addr, entry->size);
> >>> + }
> >>>
> >>> if (entry->type != E820_TYPE_RAM && entry->type != E820_TYPE_RESERVED_KERN)
> >>> continue;
> >>>
> >>> The setting of node later in numa_init() will assign the proper node
> >>> for these regions as it does for the usable memory.
> >>
> >> Yes, if it's only related to e820 reserved region, this truly works.
> >>
> >> However, it also has ACPI table regions. That's why I changed to call
> >> the problematic area as firmware reserved ranges later.
> >>
> >> Bisides, you can see below line, there's another reserved region which only
> >> occupies one page in one memory seciton. If adding to memblock.memory, we also
> >> will build struct mem_section and the relevant struct pages for the whole
> >> section. And then the holes around that page will be added and initialized in
> >> init_unavailable_mem(). numa_init() will assign proper node for memblock.memory
> >> and memblock.reserved, but won't assign proper node for the holes.
> >>
> >> ~~~
> >> [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
> >> ~~~
> >>
> >> So I still think we should not add firmware reserved range into
> >> memblock for fixing this issue.
> >>
> >> And, the fix in the original patch seems necessary. You can see in
> >> compaction code, the migration source is chosen from LRU pages or
> >> movable pages, the migration target has to be got from Buddy. However,
> >> only the min_pfn in fast_isolate_freepages(), it's calculated by
> >> distance between cc->free_pfn - cc->migrate_pfn, we can't guarantee it's
> >> safe, then use it as the target to handle.
> >
> > I do not object to your original fix with careful check for pfn validity.
> >
> > But I still think that the memory reserved by the firmware is still
> > memory and it should be added to memblock.memory. This way the memory
>
> If it's really memory that could be read/written, I think I agree.
I would say some of them may not be allowed to be read/written, if I
understand it correctly. I roughly went through the x86 init code, there
are some places where mem region is marked as E820_TYPE_RESERVED so that
they are not touched after initialization. E.g:
1) pfn 0
In trim_bios_range(), we set the pfn 0 as E820_TYPE_RESERVED. You can
see the code comment, this is a BIOS owned area, but not kernel RAM.
2)GART reserved region
In early_gart_iommu_check(), GART IOMMU firmware will reserve a region
in an area, firmware designer won't map system RAM into that area.
And also intel_graphics_stolen(), arch_rmrr_sanity_check(), these
regions are not system RAM backed area, reading from or writting into
these area may cause error.
Futhermore, there's a KASLR bug found by HPE, its triggering and root
cause are written into below commit log. You can see that accessing to
firmware reserved region caused BIOS to halt system when cpu doing
speculative.
commit 2aa85f246c181b1fa89f27e8e20c5636426be624
Author: Steve Wahl <[email protected]>
Date: Tue Sep 24 16:03:55 2019 -0500
x86/boot/64: Make level2_kernel_pgt pages invalid outside kernel area
Our hardware (UV aka Superdome Flex) has address ranges marked
reserved by the BIOS. Access to these ranges is caught as an error,
causing the BIOS to halt the system.
>
> > map will be properly initialized from the very beginning and we won't
> > need init_unavailable_mem() and alike workarounds and. Obviously, the patch
>
> I remember init_unavailable_mem() is necessary for holes within
> sections, where we actually *don't* have memory, but we still have have
> a valid memmap (full section) that we have to initialize.
>
> See the example from 4b094b7851bf ("mm/page_alloc.c: initialize memmap
> of unavailable memory directly"). Our main memory ends within a section,
> so we have to initialize the remaining parts because the whole section
> will be marked valid/online.
Yes, memory hole need be handled in init_unavailable_mem(). Since we
have created struct page for them, need initialize them. We can't
discard init_unavailable_mem() for now.
>
> Any way to improve this handling is appreciated. In that patch I also
> spelled out that we might want to mark such holes via a new page type,
> e.g., PageHole(). Such a page is a memory hole, but has a valid memmap.
> Any content in the memmap (zone/node) should be ignored.
As I said at above, I am a little conservative to add all those regions of
E820_TYPE_RESERVED into memblock.memory and memblock.reserved, because
most of them are firmware reserved region, they may be not backed by normal
RAM.
I was thinking to step back to use mm_zero_struct_page() inside
init_unavailable_range() as below. But it doesn't differ much
from __init_single_page(), except of the _refcount and mapcount.
Zeroing struct page equals to putting them into node 0, zero 0.
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 3973b5fdfe3f..4e4b72cf5283 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -6901,7 +6901,7 @@ static u64 __init init_unavailable_range(unsigned long spfn, unsigned long epfn)
* (in memblock.reserved but not in memblock.memory) will
* get re-initialized via reserve_bootmem_region() later.
*/
- __init_single_page(pfn_to_page(pfn), pfn, 0, 0);
+ mm_zero_struct_page(pfn_to_page(pfn));
__SetPageReserved(pfn_to_page(pfn));
pgcnt++;
}
About adding these unavailable ranges into node/zone, in the old code,
it just happened to add them into expected node/zone. You can see in
early_pfn_in_nid(), if no nid found from memblock, the returned '-1'
will make it true ironically. But that is not saying the bad thing
always got good result. If the last zone of node 0 is DMA32 zone, the
deferred init will skip the only chance to add some of unavailable
rnages into expected node/zone. Means they were not always added into
appropriate node/zone before, the change of iterating memblock.memory in
memmap_init() dones't introduce regression.
static inline bool __meminit early_pfn_in_nid(unsigned long pfn, int node)
{
int nid;
nid = __early_pfn_to_nid(pfn, &early_pfnnid_cache);
if (nid >= 0 && nid != node)
return false;
return true;
}
So if no anybody need access them after boot, not adding them into any
node/zone sounds better. Otherwise, better add them in the appropriate
node/zone.
>
> But it's all quite confusing, especially across architectures and ...
>
> > above is not enough, but it's a small step in this direction.
> >
> > I believe that improving the early memory initialization would make many
> > things simpler and more robust, but that's a different story :)
>
> ... I second that.
>
> --
> Thanks,
>
> David / dhildenb
On 05/28/20 at 04:59pm, Baoquan He wrote:
> [email protected], [email protected], [email protected], [email protected],
> Bcc: [email protected]
> Subject: Re: [PATCH] mm/compaction: Fix the incorrect hole in
> fast_isolate_freepages()
> Reply-To:
> In-Reply-To: <[email protected]>
Sorry, mail client mess up the mail header, have resent one. Please
ignore this one.
>
> On 05/26/20 at 01:49pm, David Hildenbrand wrote:
> > On 26.05.20 13:32, Mike Rapoport wrote:
> > > Hello Baoquan,
> > >
> > > On Tue, May 26, 2020 at 04:45:43PM +0800, Baoquan He wrote:
> > >> On 05/22/20 at 05:20pm, Mike Rapoport wrote:
> > >>> Hello Baoquan,
> > >>>
> > >>> On Fri, May 22, 2020 at 03:25:24PM +0800, Baoquan He wrote:
> > >>>> On 05/22/20 at 03:01pm, Baoquan He wrote:
> > >>>>>
> > >>>>> So let's add these unavailable ranges into memblock and reserve them
> > >>>>> in init_unavailable_range() instead. With this change, they will be added
> > >>>>> into appropriate node and zone in memmap_init(), and initialized in
> > >>>>> reserve_bootmem_region() just like any other memblock reserved regions.
> > >>>>
> > >>>> Seems this is not right. They can't get nid in init_unavailable_range().
> > >>>> Adding e820 ranges may let them get nid. But the hole range won't be
> > >>>> added to memblock, and still has the issue.
> > >>>>
> > >>>> Nack this one for now, still considering.
> > >>>
> > >>> Why won't we add the e820 reserved ranges to memblock.memory during
> > >>> early boot as I suggested?
> > >>>
> > >>> diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
> > >>> index c5399e80c59c..b0940c618ed9 100644
> > >>> --- a/arch/x86/kernel/e820.c
> > >>> +++ b/arch/x86/kernel/e820.c
> > >>> @@ -1301,8 +1301,11 @@ void __init e820__memblock_setup(void)
> > >>> if (end != (resource_size_t)end)
> > >>> continue;
> > >>>
> > >>> - if (entry->type == E820_TYPE_SOFT_RESERVED)
> > >>> + if (entry->type == E820_TYPE_SOFT_RESERVED ||
> > >>> + entry->type == E820_TYPE_RESERVED) {
> > >>> + memblock_add(entry->addr, entry->size);
> > >>> memblock_reserve(entry->addr, entry->size);
> > >>> + }
> > >>>
> > >>> if (entry->type != E820_TYPE_RAM && entry->type != E820_TYPE_RESERVED_KERN)
> > >>> continue;
> > >>>
> > >>> The setting of node later in numa_init() will assign the proper node
> > >>> for these regions as it does for the usable memory.
> > >>
> > >> Yes, if it's only related to e820 reserved region, this truly works.
> > >>
> > >> However, it also has ACPI table regions. That's why I changed to call
> > >> the problematic area as firmware reserved ranges later.
> > >>
> > >> Bisides, you can see below line, there's another reserved region which only
> > >> occupies one page in one memory seciton. If adding to memblock.memory, we also
> > >> will build struct mem_section and the relevant struct pages for the whole
> > >> section. And then the holes around that page will be added and initialized in
> > >> init_unavailable_mem(). numa_init() will assign proper node for memblock.memory
> > >> and memblock.reserved, but won't assign proper node for the holes.
> > >>
> > >> ~~~
> > >> [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
> > >> ~~~
> > >>
> > >> So I still think we should not add firmware reserved range into
> > >> memblock for fixing this issue.
> > >>
> > >> And, the fix in the original patch seems necessary. You can see in
> > >> compaction code, the migration source is chosen from LRU pages or
> > >> movable pages, the migration target has to be got from Buddy. However,
> > >> only the min_pfn in fast_isolate_freepages(), it's calculated by
> > >> distance between cc->free_pfn - cc->migrate_pfn, we can't guarantee it's
> > >> safe, then use it as the target to handle.
> > >
> > > I do not object to your original fix with careful check for pfn validity.
> > >
> > > But I still think that the memory reserved by the firmware is still
> > > memory and it should be added to memblock.memory. This way the memory
> >
> > If it's really memory that could be read/written, I think I agree.
>
> I would say some of them may not be allowed to be read/written, if I
> understand it correctly. I roughly went through the x86 init code, there
> are some places where mem region is marked as E820_TYPE_RESERVED so that
> they are not touched after initialization. E.g:
>
> 1) pfn 0
> In trim_bios_range(), we set the pfn 0 as E820_TYPE_RESERVED. You can
> see the code comment, this is a BIOS owned area, but not kernel RAM.
>
> 2)GART reserved region
> In early_gart_iommu_check(), GART IOMMU firmware will reserve a region
> in an area, firmware designer won't map system RAM into that area.
>
> And also intel_graphics_stolen(), arch_rmrr_sanity_check(), these
> regions are not system RAM backed area, reading from or writting into
> these area may cause error.
>
> Futhermore, there's a KASLR bug found by HPE, its triggering and root
> cause are written into below commit log. You can see that accessing to
> firmware reserved region caused BIOS to halt system when cpu doing
> speculative.
>
> commit 2aa85f246c181b1fa89f27e8e20c5636426be624
> Author: Steve Wahl <[email protected]>
> Date: Tue Sep 24 16:03:55 2019 -0500
>
> x86/boot/64: Make level2_kernel_pgt pages invalid outside kernel area
>
> Our hardware (UV aka Superdome Flex) has address ranges marked
> reserved by the BIOS. Access to these ranges is caught as an error,
> causing the BIOS to halt the system.
>
> >
> > > map will be properly initialized from the very beginning and we won't
> > > need init_unavailable_mem() and alike workarounds and. Obviously, the patch
> >
> > I remember init_unavailable_mem() is necessary for holes within
> > sections, where we actually *don't* have memory, but we still have have
> > a valid memmap (full section) that we have to initialize.
> >
> > See the example from 4b094b7851bf ("mm/page_alloc.c: initialize memmap
> > of unavailable memory directly"). Our main memory ends within a section,
> > so we have to initialize the remaining parts because the whole section
> > will be marked valid/online.
>
> Yes, memory hole need be handled in init_unavailable_mem(). Since we
> have created struct page for them, need initialize them. We can't
> discard init_unavailable_mem() for now.
>
> >
> > Any way to improve this handling is appreciated. In that patch I also
> > spelled out that we might want to mark such holes via a new page type,
> > e.g., PageHole(). Such a page is a memory hole, but has a valid memmap.
> > Any content in the memmap (zone/node) should be ignored.
>
> As I said at above, I am a little conservative to add all those regions of
> E820_TYPE_RESERVED into memblock.memory and memblock.reserved, because
> most of them are firmware reserved region, they may be not backed by normal
> RAM.
>
> I was thinking to step back to use mm_zero_struct_page() inside
> init_unavailable_range() as below. But it doesn't differ much
> from __init_single_page(), except of the _refcount and mapcount.
> Zeroing struct page equals to putting them into node 0, zero 0.
>
> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> index 3973b5fdfe3f..4e4b72cf5283 100644
> --- a/mm/page_alloc.c
> +++ b/mm/page_alloc.c
> @@ -6901,7 +6901,7 @@ static u64 __init init_unavailable_range(unsigned long spfn, unsigned long epfn)
> * (in memblock.reserved but not in memblock.memory) will
> * get re-initialized via reserve_bootmem_region() later.
> */
> - __init_single_page(pfn_to_page(pfn), pfn, 0, 0);
> + mm_zero_struct_page(pfn_to_page(pfn));
> __SetPageReserved(pfn_to_page(pfn));
> pgcnt++;
> }
>
> About adding these unavailable ranges into node/zone, in the old code,
> it just happened to add them into expected node/zone. You can see in
> early_pfn_in_nid(), if no nid found from memblock, the returned '-1'
> will make it true ironically. But that is not saying the bad thing
> always got good result. If the last zone of node 0 is DMA32 zone, the
> deferred init will skip the only chance to add some of unavailable
> rnages into expected node/zone. Means they were not always added into
> appropriate node/zone before, the change of iterating memblock.memory in
> memmap_init() dones't introduce regression.
>
> static inline bool __meminit early_pfn_in_nid(unsigned long pfn, int node)
> {
> int nid;
>
> nid = __early_pfn_to_nid(pfn, &early_pfnnid_cache);
> if (nid >= 0 && nid != node)
> return false;
> return true;
> }
>
> So if no anybody need access them after boot, not adding them into any
> node/zone sounds better. Otherwise, better add them in the appropriate
> node/zone.
>
> >
> > But it's all quite confusing, especially across architectures and ...
> >
> > > above is not enough, but it's a small step in this direction.
> > >
> > > I believe that improving the early memory initialization would make many
> > > things simpler and more robust, but that's a different story :)
> >
> > ... I second that.
> >
> > --
> > Thanks,
> >
> > David / dhildenb
>
>