NXP PCA9570 is a 4-bit I2C GPO expander without interrupt functionality.
Its ports are controlled only by a data byte without register address.
Datasheet: https://www.nxp.com/docs/en/data-sheet/PCA9570.pdf
Signed-off-by: Sungbo Eo <[email protected]>
---
v6:
* removed client
* re-added mutex
* removed template_chip
v5:
* amended the commit message
* removed unnecessary castings
* added data to of_match_table
v4:
* removed ->direction_input() and ->direction_output()
(Seems unnecessary to me)
* removed ->set_multiple()
(I'm not sure this implementation is really correct)
* added ->get()
(DS says we can read the status from the device)
* read current status during probe
v3:
* remove mutex
* rename buffer to out
* simplify return statements
* replace ->probe() to ->probe_new()
* move ngpio to driver_data
(PCA9571 is 8-bit so I thought making ngpio configurable is a good idea)
v2:
* move the direction functions below the set functions
* use devm_gpiochip_add_data() and remove the remove callback
v1:
Tested in kernel 5.4 on an ipq40xx platform.
This is my first time submitting a whole driver patch, and I'm not really
familiar with this PCA expander series.
Please let me know how I can improve this patch further.
FYI there's an unmerged patch for this chip.
http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2017-May/105602.html
I don't have PCA9571 either so I didn't add support for it.
---
drivers/gpio/Kconfig | 8 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-pca9570.c | 146 ++++++++++++++++++++++++++++++++++++
3 files changed, 155 insertions(+)
create mode 100644 drivers/gpio/gpio-pca9570.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index c6b5c65c8405..d10dcb81b841 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -962,6 +962,14 @@ config GPIO_PCA953X_IRQ
Say yes here to enable the pca953x to be used as an interrupt
controller. It requires the driver to be built in the kernel.
+config GPIO_PCA9570
+ tristate "PCA9570 4-Bit I2C GPO expander"
+ help
+ Say yes here to enable the GPO driver for the NXP PCA9570 chip.
+
+ To compile this driver as a module, choose M here: the module will
+ be called gpio-pca9570.
+
config GPIO_PCF857X
tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
select GPIOLIB_IRQCHIP
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 1e4894e0bf0f..33cb40c28a61 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -110,6 +110,7 @@ obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o
obj-$(CONFIG_GPIO_OMAP) += gpio-omap.o
obj-$(CONFIG_GPIO_PALMAS) += gpio-palmas.o
obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o
+obj-$(CONFIG_GPIO_PCA9570) += gpio-pca9570.o
obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PCIE_IDIO_24) += gpio-pcie-idio-24.o
diff --git a/drivers/gpio/gpio-pca9570.c b/drivers/gpio/gpio-pca9570.c
new file mode 100644
index 000000000000..cb2b2f735c15
--- /dev/null
+++ b/drivers/gpio/gpio-pca9570.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for PCA9570 I2C GPO expander
+ *
+ * Copyright (C) 2020 Sungbo Eo <[email protected]>
+ *
+ * Based on gpio-tpic2810.c
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ * Andrew F. Davis <[email protected]>
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/property.h>
+
+/**
+ * struct pca9570 - GPIO driver data
+ * @chip: GPIO controller chip
+ * @lock: Protects write sequences
+ * @out: Buffer for device register
+ */
+struct pca9570 {
+ struct gpio_chip chip;
+ struct mutex lock;
+ u8 out;
+};
+
+static int pca9570_read(struct pca9570 *gpio, u8 *value)
+{
+ struct i2c_client *client = to_i2c_client(gpio->chip.parent);
+ int ret;
+
+ ret = i2c_smbus_read_byte(client);
+ if (ret < 0)
+ return ret;
+
+ *value = ret;
+ return 0;
+}
+
+static int pca9570_write(struct pca9570 *gpio, u8 value)
+{
+ struct i2c_client *client = to_i2c_client(gpio->chip.parent);
+
+ return i2c_smbus_write_byte(client, value);
+}
+
+static int pca9570_get_direction(struct gpio_chip *chip,
+ unsigned offset)
+{
+ /* This device always output */
+ return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int pca9570_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct pca9570 *gpio = gpiochip_get_data(chip);
+ u8 buffer;
+ int ret;
+
+ ret = pca9570_read(gpio, &buffer);
+ if (ret)
+ return ret;
+
+ return !!(buffer & BIT(offset));
+}
+
+static void pca9570_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct pca9570 *gpio = gpiochip_get_data(chip);
+ u8 buffer;
+ int ret;
+
+ mutex_lock(&gpio->lock);
+
+ buffer = gpio->out;
+ if (value)
+ buffer |= BIT(offset);
+ else
+ buffer &= ~BIT(offset);
+
+ ret = pca9570_write(gpio, buffer);
+ if (ret)
+ goto out;
+
+ gpio->out = buffer;
+
+out:
+ mutex_unlock(&gpio->lock);
+}
+
+static int pca9570_probe(struct i2c_client *client)
+{
+ struct pca9570 *gpio;
+
+ gpio = devm_kzalloc(&client->dev, sizeof(*gpio), GFP_KERNEL);
+ if (!gpio)
+ return -ENOMEM;
+
+ gpio->chip.label = client->name;
+ gpio->chip.parent = &client->dev;
+ gpio->chip.owner = THIS_MODULE;
+ gpio->chip.get_direction = pca9570_get_direction;
+ gpio->chip.get = pca9570_get;
+ gpio->chip.set = pca9570_set;
+ gpio->chip.base = -1;
+ gpio->chip.ngpio = (uintptr_t)device_get_match_data(&client->dev);
+ gpio->chip.can_sleep = true;
+
+ mutex_init(&gpio->lock);
+
+ /* Read the current output level */
+ pca9570_read(gpio, &gpio->out);
+
+ i2c_set_clientdata(client, gpio);
+
+ return devm_gpiochip_add_data(&client->dev, &gpio->chip, gpio);
+}
+
+static const struct i2c_device_id pca9570_id_table[] = {
+ { "pca9570", 4 },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, pca9570_id_table);
+
+static const struct of_device_id pca9570_of_match_table[] = {
+ { .compatible = "nxp,pca9570", .data = (void *)4 },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pca9570_of_match_table);
+
+static struct i2c_driver pca9570_driver = {
+ .driver = {
+ .name = "pca9570",
+ .of_match_table = pca9570_of_match_table,
+ },
+ .probe_new = pca9570_probe,
+ .id_table = pca9570_id_table,
+};
+module_i2c_driver(pca9570_driver);
+
+MODULE_AUTHOR("Sungbo Eo <[email protected]>");
+MODULE_DESCRIPTION("GPIO expander driver for PCA9570");
+MODULE_LICENSE("GPL v2");
--
2.27.0
On Thu, Jul 9, 2020 at 4:48 PM Sungbo Eo <[email protected]> wrote:
>
> NXP PCA9570 is a 4-bit I2C GPO expander without interrupt functionality.
> Its ports are controlled only by a data byte without register address.
>
LGTM, thanks!
Reviewed-by: Andy Shevchenko <[email protected]>
> Datasheet: https://www.nxp.com/docs/en/data-sheet/PCA9570.pdf
> Signed-off-by: Sungbo Eo <[email protected]>
> ---
> v6:
> * removed client
> * re-added mutex
> * removed template_chip
>
> v5:
> * amended the commit message
> * removed unnecessary castings
> * added data to of_match_table
>
> v4:
> * removed ->direction_input() and ->direction_output()
> (Seems unnecessary to me)
> * removed ->set_multiple()
> (I'm not sure this implementation is really correct)
> * added ->get()
> (DS says we can read the status from the device)
> * read current status during probe
>
> v3:
> * remove mutex
> * rename buffer to out
> * simplify return statements
> * replace ->probe() to ->probe_new()
> * move ngpio to driver_data
> (PCA9571 is 8-bit so I thought making ngpio configurable is a good idea)
>
> v2:
> * move the direction functions below the set functions
> * use devm_gpiochip_add_data() and remove the remove callback
>
> v1:
> Tested in kernel 5.4 on an ipq40xx platform.
>
> This is my first time submitting a whole driver patch, and I'm not really
> familiar with this PCA expander series.
> Please let me know how I can improve this patch further.
>
> FYI there's an unmerged patch for this chip.
> http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2017-May/105602.html
> I don't have PCA9571 either so I didn't add support for it.
> ---
> drivers/gpio/Kconfig | 8 ++
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-pca9570.c | 146 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 155 insertions(+)
> create mode 100644 drivers/gpio/gpio-pca9570.c
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index c6b5c65c8405..d10dcb81b841 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -962,6 +962,14 @@ config GPIO_PCA953X_IRQ
> Say yes here to enable the pca953x to be used as an interrupt
> controller. It requires the driver to be built in the kernel.
>
> +config GPIO_PCA9570
> + tristate "PCA9570 4-Bit I2C GPO expander"
> + help
> + Say yes here to enable the GPO driver for the NXP PCA9570 chip.
> +
> + To compile this driver as a module, choose M here: the module will
> + be called gpio-pca9570.
> +
> config GPIO_PCF857X
> tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
> select GPIOLIB_IRQCHIP
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index 1e4894e0bf0f..33cb40c28a61 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -110,6 +110,7 @@ obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o
> obj-$(CONFIG_GPIO_OMAP) += gpio-omap.o
> obj-$(CONFIG_GPIO_PALMAS) += gpio-palmas.o
> obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o
> +obj-$(CONFIG_GPIO_PCA9570) += gpio-pca9570.o
> obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
> obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
> obj-$(CONFIG_GPIO_PCIE_IDIO_24) += gpio-pcie-idio-24.o
> diff --git a/drivers/gpio/gpio-pca9570.c b/drivers/gpio/gpio-pca9570.c
> new file mode 100644
> index 000000000000..cb2b2f735c15
> --- /dev/null
> +++ b/drivers/gpio/gpio-pca9570.c
> @@ -0,0 +1,146 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Driver for PCA9570 I2C GPO expander
> + *
> + * Copyright (C) 2020 Sungbo Eo <[email protected]>
> + *
> + * Based on gpio-tpic2810.c
> + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
> + * Andrew F. Davis <[email protected]>
> + */
> +
> +#include <linux/gpio/driver.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/property.h>
> +
> +/**
> + * struct pca9570 - GPIO driver data
> + * @chip: GPIO controller chip
> + * @lock: Protects write sequences
> + * @out: Buffer for device register
> + */
> +struct pca9570 {
> + struct gpio_chip chip;
> + struct mutex lock;
> + u8 out;
> +};
> +
> +static int pca9570_read(struct pca9570 *gpio, u8 *value)
> +{
> + struct i2c_client *client = to_i2c_client(gpio->chip.parent);
> + int ret;
> +
> + ret = i2c_smbus_read_byte(client);
> + if (ret < 0)
> + return ret;
> +
> + *value = ret;
> + return 0;
> +}
> +
> +static int pca9570_write(struct pca9570 *gpio, u8 value)
> +{
> + struct i2c_client *client = to_i2c_client(gpio->chip.parent);
> +
> + return i2c_smbus_write_byte(client, value);
> +}
> +
> +static int pca9570_get_direction(struct gpio_chip *chip,
> + unsigned offset)
> +{
> + /* This device always output */
> + return GPIO_LINE_DIRECTION_OUT;
> +}
> +
> +static int pca9570_get(struct gpio_chip *chip, unsigned offset)
> +{
> + struct pca9570 *gpio = gpiochip_get_data(chip);
> + u8 buffer;
> + int ret;
> +
> + ret = pca9570_read(gpio, &buffer);
> + if (ret)
> + return ret;
> +
> + return !!(buffer & BIT(offset));
> +}
> +
> +static void pca9570_set(struct gpio_chip *chip, unsigned offset, int value)
> +{
> + struct pca9570 *gpio = gpiochip_get_data(chip);
> + u8 buffer;
> + int ret;
> +
> + mutex_lock(&gpio->lock);
> +
> + buffer = gpio->out;
> + if (value)
> + buffer |= BIT(offset);
> + else
> + buffer &= ~BIT(offset);
> +
> + ret = pca9570_write(gpio, buffer);
> + if (ret)
> + goto out;
> +
> + gpio->out = buffer;
> +
> +out:
> + mutex_unlock(&gpio->lock);
> +}
> +
> +static int pca9570_probe(struct i2c_client *client)
> +{
> + struct pca9570 *gpio;
> +
> + gpio = devm_kzalloc(&client->dev, sizeof(*gpio), GFP_KERNEL);
> + if (!gpio)
> + return -ENOMEM;
> +
> + gpio->chip.label = client->name;
> + gpio->chip.parent = &client->dev;
> + gpio->chip.owner = THIS_MODULE;
> + gpio->chip.get_direction = pca9570_get_direction;
> + gpio->chip.get = pca9570_get;
> + gpio->chip.set = pca9570_set;
> + gpio->chip.base = -1;
> + gpio->chip.ngpio = (uintptr_t)device_get_match_data(&client->dev);
> + gpio->chip.can_sleep = true;
> +
> + mutex_init(&gpio->lock);
> +
> + /* Read the current output level */
> + pca9570_read(gpio, &gpio->out);
> +
> + i2c_set_clientdata(client, gpio);
> +
> + return devm_gpiochip_add_data(&client->dev, &gpio->chip, gpio);
> +}
> +
> +static const struct i2c_device_id pca9570_id_table[] = {
> + { "pca9570", 4 },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(i2c, pca9570_id_table);
> +
> +static const struct of_device_id pca9570_of_match_table[] = {
> + { .compatible = "nxp,pca9570", .data = (void *)4 },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, pca9570_of_match_table);
> +
> +static struct i2c_driver pca9570_driver = {
> + .driver = {
> + .name = "pca9570",
> + .of_match_table = pca9570_of_match_table,
> + },
> + .probe_new = pca9570_probe,
> + .id_table = pca9570_id_table,
> +};
> +module_i2c_driver(pca9570_driver);
> +
> +MODULE_AUTHOR("Sungbo Eo <[email protected]>");
> +MODULE_DESCRIPTION("GPIO expander driver for PCA9570");
> +MODULE_LICENSE("GPL v2");
> --
> 2.27.0
>
--
With Best Regards,
Andy Shevchenko
On Thu, Jul 9, 2020 at 3:48 PM Sungbo Eo <[email protected]> wrote:
> NXP PCA9570 is a 4-bit I2C GPO expander without interrupt functionality.
> Its ports are controlled only by a data byte without register address.
>
> Datasheet: https://www.nxp.com/docs/en/data-sheet/PCA9570.pdf
> Signed-off-by: Sungbo Eo <[email protected]>
> ---
> v6:
> * removed client
> * re-added mutex
> * removed template_chip
This v6 version applied, thanks to everyone who helped out
reviewing this driver!!
Yours,
Linus Walleij