From: Bolarinwa Olayemi Saheed <[email protected]>
On failure pcie_capability_read_dword() sets it's last parameter, val
to 0. However, with Patch 14/14, it is possible that val is set to ~0 on
failure. This would introduce a bug because (x & x) == (~0 & x).
This bug can be avoided without changing the function's behaviour if the
return value of pcie_capability_read_dword is checked to confirm success.
Check the return value of pcie_capability_read_dword() to ensure success.
Suggested-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Bolarinwa Olayemi Saheed <[email protected]>
---
drivers/net/wireless/ath/ath9k/pci.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index f3461b193c7a..cff9af3af38d 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -825,6 +825,7 @@ static void ath_pci_aspm_init(struct ath_common *common)
struct pci_dev *pdev = to_pci_dev(sc->dev);
struct pci_dev *parent;
u16 aspm;
+ int ret;
if (!ah->is_pciexpress)
return;
@@ -866,8 +867,8 @@ static void ath_pci_aspm_init(struct ath_common *common)
if (AR_SREV_9462(ah))
pci_read_config_dword(pdev, 0x70c, &ah->config.aspm_l1_fix);
- pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &aspm);
- if (aspm & (PCI_EXP_LNKCTL_ASPM_L0S | PCI_EXP_LNKCTL_ASPM_L1)) {
+ ret = pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &aspm);
+ if (!ret && (aspm & (PCI_EXP_LNKCTL_ASPM_L0S | PCI_EXP_LNKCTL_ASPM_L1))) {
ah->aspm_enabled = true;
/* Initialize PCIe PM and SERDES registers. */
ath9k_hw_configpcipowersave(ah, false);
--
2.18.2