This series adds support for the AMS AS73211 digital XYZ sensor. Some
comments to the review emails below...
Again, many thanks for the comprehensive reviews.
Changes in v5:
---------------
- [1/2] Reviewed by Rob Herring
- [2/2] Added KHZ_PER_HR define
- [2/2] Added AS73211_SAMPLE_FREQ_BASE define
- [2/2] Slight changes in comments
- [2/2] Claim direct mode in write_raw()
- [2/2] Saturate only in case of overflow
- [2/2] Don't set indio_dev->dev.parent
- [2/2] Fix error path (order) in probe()
Changes in v4:
---------------
- Integrated 2nd review from Andy Shevchenko
- Use more devm_ functions in as73211_probe()
Changes in v3:
---------------
- Integrated comments from Andy Shevchenko
- Integrated comments from Jonathan Cameron
Changes in v2:
---------------
- Fix $id in dt binding
- Document full I2C address range in "reg" property
- Move "buffer" member out of "struct as73211_data"
- Fix sparse warnings by using correct data types
On Friday, 31 July 2020, 17:41:47 CEST, Andy Shevchenko wrote:
> On Fri, Jul 31, 2020 at 1:52 PM Christian Eggers <[email protected]> wrote:
> > devm_iio_device_alloc() doesn't pass 'dev' to iio_device_alloc().
> > I already looked around, but I didn't find. And after debugging
> > v5.4, devm_iio_device_alloc() definitely doesn't do it.
>
> Why are you talking about v5.4? We are in v5.8 cycle contributing to v5.9.
v5.4-rt is the version for my product release. Current base for these
patches is 5.8-rc6
On Friday, 31 July 2020, 18:19:55 CEST, Jonathan Cameron wrote:
> > On Fri, Jul 31, 2020 at 1:52 PM Christian Eggers <[email protected]> wrote:
> > Recently IIO gained some features among which I think the one that
> > assigns parent devices.
>
> yup. This should be in linux-next now for the coming merge window (which
> probably opens on Sunday).
Thanks for the hint. Is there a particular tree which is preferred for
IIO development?
On Saturday, 1 August 2020, 17:29:58 CEST, Jonathan Cameron wrote:
> On Fri, 31 Jul 2020 09:01:14 +0200 Christian Eggers <[email protected]> wrote:
> > +static int as73211_write_raw(struct iio_dev *indio_dev, struct
> > iio_chan_spec const *chan, + int val, int val2, long mask)
> > +{
> > + ...
> > + /* Need to switch to config mode ... */
>
> Is this safe whilst we are doing a capture?
> You may want to claim_direct_mode for write_raw to ensure we don't get such
> a race.
>
That's an important point! As I use iio-trig-sysfs, I never had any
problems with this. But if for instance iio-trig-hrtimer is active, this
could become a problem.
In v5, I have claimed direct mode. For the application this means, that
buffer/enable has to be set to '0' before any settings can be
changed. As libiio doesn't support enabling/disabling a buffer directly,
the buffer needs to be destroyed and newly constructed.
Add DT bindings for AMS AS73211 XYZ True Color Sensor.
Signed-off-by: Christian Eggers <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
.../bindings/iio/light/ams,as73211.yaml | 54 +++++++++++++++++++
1 file changed, 54 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
diff --git a/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml b/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
new file mode 100644
index 000000000000..0e8cd02759b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/ams,as73211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor
+
+maintainers:
+ - Christian Eggers <[email protected]>
+
+description: |
+ XYZ True Color Sensor with I2C Interface
+ https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-b302-c2fd-e30a-c98df87616df
+
+properties:
+ compatible:
+ enum:
+ - ams,as73211
+
+ reg:
+ description:
+ I2C address of the device (0x74...0x77).
+ maxItems: 1
+
+ interrupts:
+ description:
+ Interrupt specifier for the READY interrupt generated by the device.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ as73211@74 {
+ compatible = "ams,as73211";
+ reg = <0x74>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_color_sensor>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <19 IRQ_TYPE_EDGE_RISING>; /* READY */
+ };
+ };
+...
--
Christian Eggers
Embedded software developer
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler
Support for AMS AS73211 JENCOLOR(R) Digital XYZ Sensor.
This driver has no built-in trigger. In order for making triggered
measurements, an external (software) trigger driver like
iio-trig-hrtimer or iio-trig-sysfs is required.
The sensor supports single and continuous measurement modes. The latter
is not used by design as this would require tight timing synchronization
between hardware and driver without much benefit.
Datasheet: https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-b302-c2fd-e30a-c98df87616df
Signed-off-by: Christian Eggers <[email protected]>
---
MAINTAINERS | 7 +
drivers/iio/light/Kconfig | 15 +
drivers/iio/light/Makefile | 1 +
drivers/iio/light/as73211.c | 799 ++++++++++++++++++++++++++++++++++++
4 files changed, 822 insertions(+)
create mode 100644 drivers/iio/light/as73211.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 068d6e94122b..673570414147 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -934,6 +934,13 @@ S: Supported
F: arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
F: drivers/net/ethernet/amd/xgbe/
+AMS AS73211 DRIVER
+M: Christian Eggers <[email protected]>
+L: [email protected]
+S: Maintained
+F: Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
+F: drivers/iio/light/as73211.c
+
ANALOG DEVICES INC AD5686 DRIVER
M: Michael Hennerich <[email protected]>
L: [email protected]
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 182bd18c4bb2..cade6dc0305b 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -86,6 +86,21 @@ config APDS9960
To compile this driver as a module, choose M here: the
module will be called apds9960
+config AS73211
+ tristate "AMS AS73211 XYZ color sensor"
+ depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ If you say yes here you get support for the AMS AS73211
+ JENCOLOR(R) Digital XYZ Sensor.
+
+ For triggered measurements, you will need an additional trigger driver
+ like IIO_HRTIMER_TRIGGER or IIO_SYSFS_TRIGGER.
+
+ This driver can also be built as a module. If so, the module
+ will be called as73211.
+
config BH1750
tristate "ROHM BH1750 ambient light sensor"
depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index d1c8aa30b9a8..ea376deaca54 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_AL3010) += al3010.o
obj-$(CONFIG_AL3320A) += al3320a.o
obj-$(CONFIG_APDS9300) += apds9300.o
obj-$(CONFIG_APDS9960) += apds9960.o
+obj-$(CONFIG_AS73211) += as73211.o
obj-$(CONFIG_BH1750) += bh1750.o
obj-$(CONFIG_BH1780) += bh1780.o
obj-$(CONFIG_CM32181) += cm32181.o
diff --git a/drivers/iio/light/as73211.c b/drivers/iio/light/as73211.c
new file mode 100644
index 000000000000..dd1bba4d029f
--- /dev/null
+++ b/drivers/iio/light/as73211.c
@@ -0,0 +1,799 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support for AMS AS73211 JENCOLOR(R) Digital XYZ Sensor
+ *
+ * Author: Christian Eggers <[email protected]>
+ *
+ * Copyright (c) 2020 ARRI Lighting
+ *
+ * Color light sensor with 16-bit channels for x, y, z and temperature);
+ * 7-bit I2C slave address 0x74 .. 0x77.
+ *
+ * Datasheet: https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-b302-c2fd-e30a-c98df87616df
+ */
+
+#include <linux/bitfield.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pm.h>
+
+#define HZ_PER_KHZ 1000
+
+#define AS73211_DRV_NAME "as73211"
+
+/* AS73211 configuration registers */
+#define AS73211_REG_OSR 0x0
+#define AS73211_REG_AGEN 0x2
+#define AS73211_REG_CREG1 0x6
+#define AS73211_REG_CREG2 0x7
+#define AS73211_REG_CREG3 0x8
+
+/* AS73211 output register bank */
+#define AS73211_OUT_OSR_STATUS 0
+#define AS73211_OUT_TEMP 1
+#define AS73211_OUT_MRES1 2
+#define AS73211_OUT_MRES2 3
+#define AS73211_OUT_MRES3 4
+
+#define AS73211_OSR_SS BIT(7)
+#define AS73211_OSR_PD BIT(6)
+#define AS73211_OSR_SW_RES BIT(3)
+#define AS73211_OSR_DOS_MASK GENMASK(2, 0)
+#define AS73211_OSR_DOS_CONFIG FIELD_PREP(AS73211_OSR_DOS_MASK, 0x2)
+#define AS73211_OSR_DOS_MEASURE FIELD_PREP(AS73211_OSR_DOS_MASK, 0x3)
+
+#define AS73211_AGEN_DEVID_MASK GENMASK(7, 4)
+#define AS73211_AGEN_DEVID(x) FIELD_PREP(AS73211_AGEN_DEVID_MASK, (x))
+#define AS73211_AGEN_MUT_MASK GENMASK(3, 0)
+#define AS73211_AGEN_MUT(x) FIELD_PREP(AS73211_AGEN_MUT_MASK, (x))
+
+#define AS73211_CREG1_GAIN_MASK GENMASK(7, 4)
+#define AS73211_CREG1_GAIN_1 13
+#define AS73211_CREG1_TIME_MASK GENMASK(3, 0)
+
+#define AS73211_CREG3_CCLK_MASK GENMASK(1, 0)
+
+#define AS73211_OSR_STATUS_OUTCONVOF BIT(15)
+#define AS73211_OSR_STATUS_MRESOF BIT(14)
+#define AS73211_OSR_STATUS_ADCOF BIT(13)
+#define AS73211_OSR_STATUS_LDATA BIT(12)
+#define AS73211_OSR_STATUS_NDATA BIT(11)
+#define AS73211_OSR_STATUS_NOTREADY BIT(10)
+
+#define AS73211_SAMPLE_FREQ_BASE 1024000
+
+#define AS73211_SAMPLE_TIME_NUM 15
+#define AS73211_SAMPLE_TIME_MAX_MS BIT(AS73211_SAMPLE_TIME_NUM - 1)
+
+/* Available sample frequencies are 1.024MHz multiplied by powers of two. */
+static const int as73211_samp_freq_avail[] = {
+ AS73211_SAMPLE_FREQ_BASE * 1,
+ AS73211_SAMPLE_FREQ_BASE * 2,
+ AS73211_SAMPLE_FREQ_BASE * 4,
+ AS73211_SAMPLE_FREQ_BASE * 8
+};
+
+static const int as73211_hardwaregain_avail[] = {
+ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048,
+};
+
+/**
+ * struct as73211_data - Instance data for one AS73211
+ * @client: I2C client.
+ * @osr: Cached Operational State Register.
+ * @creg1: Cached Configuration Register 1.
+ * @creg2: Cached Configuration Register 2.
+ * @creg3: Cached Configuration Register 3.
+ * @mutex: Keeps cached registers in sync with the device.
+ * @completion: Completion to wait for interrupt.
+ * @int_time_avail: Available integration times (depend on sampling frequency).
+ */
+struct as73211_data {
+ struct i2c_client *client;
+ u8 osr;
+ u8 creg1;
+ u8 creg2;
+ u8 creg3;
+ struct mutex mutex;
+ struct completion completion;
+ int int_time_avail[AS73211_SAMPLE_TIME_NUM * 2];
+};
+
+#define AS73211_COLOR_CHANNEL(_color, _si, _addr) { \
+ .type = IIO_INTENSITY, \
+ .modified = 1, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_shared_by_type = \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+ BIT(IIO_CHAN_INFO_HARDWAREGAIN) | \
+ BIT(IIO_CHAN_INFO_INT_TIME), \
+ .info_mask_shared_by_type_available = \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+ BIT(IIO_CHAN_INFO_HARDWAREGAIN) | \
+ BIT(IIO_CHAN_INFO_INT_TIME), \
+ .channel2 = IIO_MOD_##_color, \
+ .address = _addr, \
+ .scan_index = _si, \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_LE, \
+ }, \
+}
+
+#define AS73211_OFFSET_TEMP (-66.9)
+#define AS73211_SCALE_TEMP 0.05
+#define AS73211_SCALE_X 277071108 /* nW/m^2 */
+#define AS73211_SCALE_Y 298384270 /* nW/m^2 */
+#define AS73211_SCALE_Z 160241927 /* nW/m^2 */
+
+/* Channel order MUST match devices result register order */
+#define AS73211_SCAN_INDEX_TEMP 0
+#define AS73211_SCAN_INDEX_X 1
+#define AS73211_SCAN_INDEX_Y 2
+#define AS73211_SCAN_INDEX_Z 3
+#define AS73211_SCAN_INDEX_TS 4
+
+#define AS73211_SCAN_MASK_COLOR ( \
+ BIT(AS73211_SCAN_INDEX_X) | \
+ BIT(AS73211_SCAN_INDEX_Y) | \
+ BIT(AS73211_SCAN_INDEX_Z))
+
+#define AS73211_SCAN_MASK_ALL ( \
+ BIT(AS73211_SCAN_INDEX_TEMP) | \
+ AS73211_SCAN_MASK_COLOR)
+
+static const struct iio_chan_spec as73211_channels[] = {
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate =
+ BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_OFFSET) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ .address = AS73211_OUT_TEMP,
+ .scan_index = AS73211_SCAN_INDEX_TEMP,
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 16,
+ .storagebits = 16,
+ .endianness = IIO_LE,
+ }
+ },
+ AS73211_COLOR_CHANNEL(X, AS73211_SCAN_INDEX_X, AS73211_OUT_MRES1),
+ AS73211_COLOR_CHANNEL(Y, AS73211_SCAN_INDEX_Y, AS73211_OUT_MRES2),
+ AS73211_COLOR_CHANNEL(Z, AS73211_SCAN_INDEX_Z, AS73211_OUT_MRES3),
+ IIO_CHAN_SOFT_TIMESTAMP(AS73211_SCAN_INDEX_TS),
+};
+
+static unsigned int as73211_integration_time_1024cyc(struct as73211_data *data)
+{
+ /*
+ * Return integration time in units of 1024 clock cycles. Integration time
+ * in CREG1 is in powers of 2 (x 1024 cycles).
+ */
+ return BIT(FIELD_GET(AS73211_CREG1_TIME_MASK, data->creg1));
+}
+
+static unsigned int as73211_integration_time_us(struct as73211_data *data,
+ unsigned int integration_time_1024cyc)
+{
+ /*
+ * f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz)
+ * t_cycl is configured in CREG1 in powers of 2 (x 1024 cycles)
+ * t_int_us = 1 / (f_samp) * t_cycl * US_PER_SEC
+ * = 1 / (2^CREG3_CCLK * 1,024,000) * 2^CREG1_CYCLES * 1,024 * US_PER_SEC
+ * = 2^(-CREG3_CCLK) * 2^CREG1_CYCLES * 1,000
+ * In order to get rid of negative exponents, we extend the "fraction"
+ * by 2^3 (CREG3_CCLK,max = 3)
+ * t_int_us = 2^(3-CREG3_CCLK) * 2^CREG1_CYCLES * 125
+ */
+ return BIT(3 - FIELD_GET(AS73211_CREG3_CCLK_MASK, data->creg3)) *
+ integration_time_1024cyc * 125;
+}
+
+static void as73211_integration_time_calc_avail(struct as73211_data *data)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(data->int_time_avail); i++) {
+ unsigned int time_us = as73211_integration_time_us(data, BIT(i));
+
+ data->int_time_avail[i * 2 + 0] = time_us / USEC_PER_SEC;
+ data->int_time_avail[i * 2 + 1] = time_us % USEC_PER_SEC;
+ }
+}
+
+static unsigned int as73211_gain(struct as73211_data *data)
+{
+ /* gain can be calculated from CREG1 as 2^(13 - CREG1_GAIN) */
+ return BIT(AS73211_CREG1_GAIN_1 - FIELD_GET(AS73211_CREG1_GAIN_MASK, data->creg1));
+}
+
+/* must be called with as73211_data::mutex held. */
+static int as73211_req_data(struct as73211_data *data)
+{
+ unsigned int time_us = as73211_integration_time_us(data,
+ as73211_integration_time_1024cyc(data));
+ struct device *dev = &data->client->dev;
+ union i2c_smbus_data smbus_data;
+ u16 osr_status;
+ int ret;
+
+ if (data->client->irq)
+ reinit_completion(&data->completion);
+
+ /*
+ * During measurement, there should be no traffic on the i2c bus as the
+ * electrical noise would disturb the measurement process.
+ */
+ i2c_lock_bus(data->client->adapter, I2C_LOCK_SEGMENT);
+
+ data->osr &= ~AS73211_OSR_DOS_MASK;
+ data->osr |= AS73211_OSR_DOS_MEASURE | AS73211_OSR_SS;
+
+ smbus_data.byte = data->osr;
+ ret = __i2c_smbus_xfer(data->client->adapter, data->client->addr,
+ data->client->flags, I2C_SMBUS_WRITE,
+ AS73211_REG_OSR, I2C_SMBUS_BYTE_DATA, &smbus_data);
+ if (ret < 0) {
+ i2c_unlock_bus(data->client->adapter, I2C_LOCK_SEGMENT);
+ return ret;
+ }
+
+ /*
+ * Reset AS73211_OSR_SS (is self clearing) in order to avoid unintentional
+ * triggering of further measurements later.
+ */
+ data->osr &= ~AS73211_OSR_SS;
+
+ /*
+ * Add some extra margin for the timeout. sensor timing is not as precise
+ * as our one ...
+ */
+ time_us += time_us / 8;
+ if (data->client->irq) {
+ ret = wait_for_completion_timeout(&data->completion, usecs_to_jiffies(time_us));
+ if (!ret) {
+ dev_err(dev, "timeout waiting for READY IRQ\n");
+ i2c_unlock_bus(data->client->adapter, I2C_LOCK_SEGMENT);
+ return -ETIMEDOUT;
+ }
+ } else {
+ /* Wait integration time */
+ usleep_range(time_us, 2 * time_us);
+ }
+
+ i2c_unlock_bus(data->client->adapter, I2C_LOCK_SEGMENT);
+
+ ret = i2c_smbus_read_word_data(data->client, AS73211_OUT_OSR_STATUS);
+ if (ret < 0)
+ return ret;
+
+ osr_status = ret;
+ if (osr_status != (AS73211_OSR_DOS_MEASURE | AS73211_OSR_STATUS_NDATA)) {
+ if (osr_status & AS73211_OSR_SS) {
+ dev_err(dev, "%s() Measurement has not stopped\n", __func__);
+ return -ETIME;
+ }
+ if (osr_status & AS73211_OSR_STATUS_NOTREADY) {
+ dev_err(dev, "%s() Data is not ready\n", __func__);
+ return -ENODATA;
+ }
+ if (!(osr_status & AS73211_OSR_STATUS_NDATA)) {
+ dev_err(dev, "%s() No new data available\n", __func__);
+ return -ENODATA;
+ }
+ if (osr_status & AS73211_OSR_STATUS_LDATA) {
+ dev_err(dev, "%s() Result buffer overrun\n", __func__);
+ return -ENOBUFS;
+ }
+ if (osr_status & AS73211_OSR_STATUS_ADCOF) {
+ dev_err(dev, "%s() ADC overflow\n", __func__);
+ return -EOVERFLOW;
+ }
+ if (osr_status & AS73211_OSR_STATUS_MRESOF) {
+ dev_err(dev, "%s() Measurement result overflow\n", __func__);
+ return -EOVERFLOW;
+ }
+ if (osr_status & AS73211_OSR_STATUS_OUTCONVOF) {
+ dev_err(dev, "%s() Timer overflow\n", __func__);
+ return -EOVERFLOW;
+ }
+ dev_err(dev, "%s() Unexpected status value\n", __func__);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int as73211_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct as73211_data *data = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW: {
+ int ret;
+
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret < 0)
+ return ret;
+
+ ret = as73211_req_data(data);
+ if (ret < 0) {
+ iio_device_release_direct_mode(indio_dev);
+ return ret;
+ }
+
+ ret = i2c_smbus_read_word_data(data->client, chan->address);
+ iio_device_release_direct_mode(indio_dev);
+ if (ret < 0)
+ return ret;
+
+ *val = ret;
+ return IIO_VAL_INT;
+ }
+ case IIO_CHAN_INFO_OFFSET:
+ *val = AS73211_OFFSET_TEMP;
+ *val2 = (AS73211_OFFSET_TEMP - (int)AS73211_OFFSET_TEMP) * 1000000;
+ return IIO_VAL_INT_PLUS_MICRO;
+
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_TEMP:
+ *val = AS73211_SCALE_TEMP;
+ *val2 = (AS73211_SCALE_TEMP - (int)AS73211_SCALE_TEMP) * 1000000;
+ return IIO_VAL_INT_PLUS_MICRO;
+
+ case IIO_INTENSITY: {
+ unsigned int scale;
+
+ switch (chan->channel2) {
+ case IIO_MOD_X:
+ scale = AS73211_SCALE_X;
+ break;
+ case IIO_MOD_Y:
+ scale = AS73211_SCALE_Y;
+ break;
+ case IIO_MOD_Z:
+ scale = AS73211_SCALE_Z;
+ break;
+ default:
+ return -EINVAL;
+ }
+ scale /= as73211_gain(data);
+ scale /= as73211_integration_time_1024cyc(data);
+ *val = scale;
+ return IIO_VAL_INT;
+
+ default:
+ return -EINVAL;
+ }}
+
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ /* f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz) */
+ *val = BIT(FIELD_GET(AS73211_CREG3_CCLK_MASK, data->creg3)) *
+ AS73211_SAMPLE_FREQ_BASE;
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_HARDWAREGAIN:
+ *val = as73211_gain(data);
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_INT_TIME: {
+ unsigned int time_us;
+
+ mutex_lock(&data->mutex);
+ time_us = as73211_integration_time_us(data, as73211_integration_time_1024cyc(data));
+ mutex_unlock(&data->mutex);
+ *val = time_us / USEC_PER_SEC;
+ *val2 = time_us % USEC_PER_SEC;
+ return IIO_VAL_INT_PLUS_MICRO;
+ }}
+
+ return -EINVAL;
+}
+
+static int as73211_read_avail(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length, long mask)
+{
+ struct as73211_data *data = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *length = ARRAY_SIZE(as73211_samp_freq_avail);
+ *vals = as73211_samp_freq_avail;
+ *type = IIO_VAL_INT;
+ return IIO_AVAIL_LIST;
+
+ case IIO_CHAN_INFO_HARDWAREGAIN:
+ *length = ARRAY_SIZE(as73211_hardwaregain_avail);
+ *vals = as73211_hardwaregain_avail;
+ *type = IIO_VAL_INT;
+ return IIO_AVAIL_LIST;
+
+ case IIO_CHAN_INFO_INT_TIME:
+ *length = ARRAY_SIZE(data->int_time_avail);
+ *vals = data->int_time_avail;
+ *type = IIO_VAL_INT_PLUS_MICRO;
+ return IIO_AVAIL_LIST;
+ }
+
+ return -EINVAL;
+}
+
+static int _as73211_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan __always_unused,
+ int val, int val2, long mask)
+{
+ struct as73211_data *data = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ: {
+ int reg_bits, freq_kHz = val / HZ_PER_KHZ; /* 1024, 2048, ... */
+
+ /* val must be 1024 * 2^x */
+ if (val < 0 || (freq_kHz * HZ_PER_KHZ) != val ||
+ !is_power_of_2(freq_kHz) || val2)
+ return -EINVAL;
+
+ /* f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz (=2^10)) */
+ reg_bits = ilog2(freq_kHz) - 10;
+ if (!FIELD_FIT(AS73211_CREG3_CCLK_MASK, reg_bits))
+ return -EINVAL;
+
+ data->creg3 &= ~AS73211_CREG3_CCLK_MASK;
+ data->creg3 |= FIELD_PREP(AS73211_CREG3_CCLK_MASK, reg_bits);
+ as73211_integration_time_calc_avail(data);
+
+ ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_CREG3, data->creg3);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+ }
+ case IIO_CHAN_INFO_HARDWAREGAIN: {
+ unsigned int reg_bits;
+
+ if (val < 0 || !is_power_of_2(val) || val2)
+ return -EINVAL;
+
+ /* gain can be calculated from CREG1 as 2^(13 - CREG1_GAIN) */
+ reg_bits = AS73211_CREG1_GAIN_1 - ilog2(val);
+ if (!FIELD_FIT(AS73211_CREG1_GAIN_MASK, reg_bits))
+ return -EINVAL;
+
+ data->creg1 &= ~AS73211_CREG1_GAIN_MASK;
+ data->creg1 |= FIELD_PREP(AS73211_CREG1_GAIN_MASK, reg_bits);
+
+ ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_CREG1, data->creg1);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+ }
+ case IIO_CHAN_INFO_INT_TIME: {
+ int val_us = val * USEC_PER_SEC + val2;
+ int time_ms;
+ int reg_bits;
+
+ /* f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz) */
+ int f_samp_1_024mhz = BIT(FIELD_GET(AS73211_CREG3_CCLK_MASK, data->creg3));
+
+ /*
+ * time_ms = time_us * US_PER_MS * f_samp_1_024mhz / MHZ_PER_HZ
+ * = time_us * f_samp_1_024mhz / 1000
+ */
+ time_ms = (val_us * f_samp_1_024mhz) / 1000; /* 1 ms, 2 ms, ... (power of two) */
+ if (time_ms < 0 || !is_power_of_2(time_ms) || time_ms > AS73211_SAMPLE_TIME_MAX_MS)
+ return -EINVAL;
+
+ reg_bits = ilog2(time_ms);
+ if (!FIELD_FIT(AS73211_CREG1_TIME_MASK, reg_bits))
+ return -EINVAL; /* not possible due to previous tests */
+
+ data->creg1 &= ~AS73211_CREG1_TIME_MASK;
+ data->creg1 |= FIELD_PREP(AS73211_CREG1_TIME_MASK, reg_bits);
+
+ ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_CREG1, data->creg1);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+ }}
+
+ return -EINVAL;
+}
+
+static int as73211_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct as73211_data *data = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&data->mutex);
+
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret < 0)
+ goto error_unlock;
+
+ /* Need to switch to config mode ... */
+ if ((data->osr & AS73211_OSR_DOS_MASK) != AS73211_OSR_DOS_CONFIG) {
+ data->osr &= ~AS73211_OSR_DOS_MASK;
+ data->osr |= AS73211_OSR_DOS_CONFIG;
+
+ ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_OSR, data->osr);
+ if (ret < 0)
+ goto error_release;
+ }
+
+ ret = _as73211_write_raw(indio_dev, chan, val, val2, mask);
+
+error_release:
+ iio_device_release_direct_mode(indio_dev);
+error_unlock:
+ mutex_unlock(&data->mutex);
+ return ret;
+}
+
+static irqreturn_t as73211_ready_handler(int irq __always_unused, void *priv)
+{
+ struct as73211_data *data = iio_priv(priv);
+
+ complete(&data->completion);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t as73211_trigger_handler(int irq __always_unused, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct as73211_data *data = iio_priv(indio_dev);
+ struct {
+ __le16 chan[4];
+ s64 ts __aligned(8);
+ } scan;
+ int data_result, ret;
+
+ mutex_lock(&data->mutex);
+
+ data_result = as73211_req_data(data);
+ if (data_result < 0 && data_result != -EOVERFLOW)
+ goto done; /* don't push any data for errors other than EOVERFLOW */
+
+ if (*indio_dev->active_scan_mask == AS73211_SCAN_MASK_ALL) {
+ /* Optimization for reading all (color + temperature) channels */
+ u8 addr = as73211_channels[0].address;
+ struct i2c_msg msgs[] = {
+ {
+ .addr = data->client->addr,
+ .flags = 0,
+ .len = 1,
+ .buf = &addr,
+ },
+ {
+ .addr = data->client->addr,
+ .flags = I2C_M_RD,
+ .len = sizeof(scan.chan),
+ .buf = (u8 *)&scan.chan,
+ },
+ };
+
+ ret = i2c_transfer(data->client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (ret < 0)
+ goto done;
+ } else {
+ /* Optimization for reading only color channels */
+
+ /* AS73211 starts reading at address 2 */
+ ret = i2c_master_recv(data->client,
+ (char *)&scan.chan[1], 3 * sizeof(scan.chan[1]));
+ if (ret < 0)
+ goto done;
+ }
+
+ if (data_result) {
+ /*
+ * Saturate all channels (in case of overflows). Temperature channel
+ * is not affected by overflows.
+ */
+ scan.chan[1] = cpu_to_le16(U16_MAX);
+ scan.chan[2] = cpu_to_le16(U16_MAX);
+ scan.chan[3] = cpu_to_le16(U16_MAX);
+ }
+
+ iio_push_to_buffers_with_timestamp(indio_dev, &scan, iio_get_time_ns(indio_dev));
+
+done:
+ mutex_unlock(&data->mutex);
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+static const struct iio_info as73211_info = {
+ .read_raw = as73211_read_raw,
+ .read_avail = as73211_read_avail,
+ .write_raw = as73211_write_raw,
+};
+
+static int as73211_power(struct iio_dev *indio_dev, bool state)
+{
+ struct as73211_data *data = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&data->mutex);
+
+ if (state)
+ data->osr &= ~AS73211_OSR_PD;
+ else
+ data->osr |= AS73211_OSR_PD;
+
+ ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_OSR, data->osr);
+
+ mutex_unlock(&data->mutex);
+
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void as73211_power_disable(void *data)
+{
+ struct iio_dev *indio_dev = data;
+
+ as73211_power(indio_dev, false);
+}
+
+static int as73211_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct as73211_data *data;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ i2c_set_clientdata(client, indio_dev);
+ data->client = client;
+
+ mutex_init(&data->mutex);
+ init_completion(&data->completion);
+
+ indio_dev->info = &as73211_info;
+ indio_dev->name = AS73211_DRV_NAME;
+ indio_dev->channels = as73211_channels;
+ indio_dev->num_channels = ARRAY_SIZE(as73211_channels);
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_OSR);
+ if (ret < 0)
+ return ret;
+ data->osr = ret;
+
+ /* reset device */
+ data->osr |= AS73211_OSR_SW_RES;
+ ret = i2c_smbus_write_byte_data(data->client, AS73211_REG_OSR, data->osr);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_OSR);
+ if (ret < 0)
+ return ret;
+ data->osr = ret;
+
+ /*
+ * Reading AGEN is only possible after reset (AGEN is not available if
+ * device is in measurement mode).
+ */
+ ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_AGEN);
+ if (ret < 0)
+ return ret;
+
+ /* At the time of writing this driver, only DEVID 2 and MUT 1 are known. */
+ if ((ret & AS73211_AGEN_DEVID_MASK) != AS73211_AGEN_DEVID(2) ||
+ (ret & AS73211_AGEN_MUT_MASK) != AS73211_AGEN_MUT(1))
+ return -ENODEV;
+
+ ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_CREG1);
+ if (ret < 0)
+ return ret;
+ data->creg1 = ret;
+
+ ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_CREG2);
+ if (ret < 0)
+ return ret;
+ data->creg2 = ret;
+
+ ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_CREG3);
+ if (ret < 0)
+ return ret;
+ data->creg3 = ret;
+ as73211_integration_time_calc_avail(data);
+
+ ret = as73211_power(indio_dev, true);
+ if (ret < 0)
+ return ret;
+
+ ret = devm_add_action_or_reset(dev, as73211_power_disable, indio_dev);
+ if (ret < 0)
+ return ret;
+
+ ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, as73211_trigger_handler, NULL);
+ if (ret < 0)
+ return ret;
+
+ if (client->irq) {
+ ret = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL,
+ as73211_ready_handler,
+ IRQF_ONESHOT,
+ client->name, indio_dev);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = devm_iio_device_register(dev, indio_dev);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int __maybe_unused as73211_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+
+ return as73211_power(indio_dev, false);
+}
+
+static int __maybe_unused as73211_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+
+ return as73211_power(indio_dev, true);
+}
+
+static SIMPLE_DEV_PM_OPS(as73211_pm_ops, as73211_suspend, as73211_resume);
+
+static const struct of_device_id as73211_of_match[] = {
+ { .compatible = "ams,as73211" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, as73211_of_match);
+
+static const struct i2c_device_id as73211_id[] = {
+ { "as73211", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, as73211_id);
+
+static struct i2c_driver as73211_driver = {
+ .driver = {
+ .name = AS73211_DRV_NAME,
+ .of_match_table = as73211_of_match,
+ .pm = &as73211_pm_ops,
+ },
+ .probe_new = as73211_probe,
+ .id_table = as73211_id,
+};
+module_i2c_driver(as73211_driver);
+
+MODULE_AUTHOR("Christian Eggers <[email protected]>");
+MODULE_DESCRIPTION("AS73211 XYZ True Color Sensor driver");
+MODULE_LICENSE("GPL");
--
Christian Eggers
Embedded software developer
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler
On Sun, Aug 2, 2020 at 7:40 PM Christian Eggers <[email protected]> wrote:
>
> Support for AMS AS73211 JENCOLOR(R) Digital XYZ Sensor.
>
> This driver has no built-in trigger. In order for making triggered
> measurements, an external (software) trigger driver like
> iio-trig-hrtimer or iio-trig-sysfs is required.
>
> The sensor supports single and continuous measurement modes. The latter
> is not used by design as this would require tight timing synchronization
> between hardware and driver without much benefit.
Thanks for an update, my comments below.
> Datasheet: https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-b302-c2fd-e30a-c98df87616df
Do we need the UUID after the document file name?
...
> +/* Available sample frequencies are 1.024MHz multiplied by powers of two. */
> +static const int as73211_samp_freq_avail[] = {
> + AS73211_SAMPLE_FREQ_BASE * 1,
> + AS73211_SAMPLE_FREQ_BASE * 2,
> + AS73211_SAMPLE_FREQ_BASE * 4,
> + AS73211_SAMPLE_FREQ_BASE * 8
+ Comma.
> +};
...
> +#define AS73211_OFFSET_TEMP (-66.9)
> +#define AS73211_SCALE_TEMP 0.05
In the kernel we don't do float arithmetic. How these are being used?
...
> + *val2 = (AS73211_OFFSET_TEMP - (int)AS73211_OFFSET_TEMP) * 1000000;
> + *val2 = (AS73211_SCALE_TEMP - (int)AS73211_SCALE_TEMP) * 1000000;
Magic 1000000 multiplier.
I think here you got them always 0. And to fix that you need to
redefine (with also units included in the name) above constants like
#define ..._OFFSET_TEMP_mC 66500
... _SCALE_TEMP_?? 50
Consider to use definitions from
https://elixir.bootlin.com/linux/latest/source/include/linux/units.h
...
> + }}
> +
> + return -EINVAL;
Make it default case.
> + }
> +
> + return -EINVAL;
Ditto.
...
> + }}
> +
> + return -EINVAL;
Ditto.
...
> + ret = devm_iio_device_register(dev, indio_dev);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
return devm_iio_device_register();
And consider to drop ' < 0' for devm_*() calls. As far as I understood
your intention to explicitly leave them because of i2c_*() calls,
though devm_*() and such are different.
--
With Best Regards,
Andy Shevchenko
On Sunday, 2 August 2020, 20:02:35 CEST, Andy Shevchenko wrote:
> Thanks for an update, my comments below.
Thanks for the review. Please see below for my questions.
Best regards
Christian
> On Sun, Aug 2, 2020 at 7:40 PM Christian Eggers <[email protected]> wrote:
> > Datasheet:
> > https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-
> > b302-c2fd-e30a-c98df87616df
> Do we need the UUID after the document file name?
I have send AMS an inquiry. Not sure whether I will get an answer. I will wait
a few days until sending v6.
> > +#define AS73211_OFFSET_TEMP (-66.9)
> > +#define AS73211_SCALE_TEMP 0.05
>
> In the kernel we don't do float arithmetic. How these are being used?
Does this restriction also apply for compile time constants? I am quite
sure that all calculations using these defines will be evaluated at compile
time. If found a number of other places where probably the same is done:
find . -name '*.c' | xargs grep "#define.*[0-9]\.[0-9]" | grep -v '"' | grep -v "\/\*.*[0-9]\.[0-9]"
> > + *val2 = (AS73211_OFFSET_TEMP - (int)AS73211_OFFSET_TEMP) *
> > 1000000;
> >
> > + *val2 = (AS73211_SCALE_TEMP -
> > (int)AS73211_SCALE_TEMP) * 1000000;
> Magic 1000000 multiplier.
I think that in the context of IIO_VAL_INT_PLUS_MICRO this isn't quite magic. Using
1000000 directly seems quite usual:
find drivers/iio/ -type f | xargs grep "val2 = .*1000000"
> I think here you got them always 0. And to fix that you need to
> redefine (with also units included in the name) above constants like
> #define ..._OFFSET_TEMP_mC 66500
> ... _SCALE_TEMP_?? 50
a scale factor has no unit
>
> Consider to use definitions from
> https://elixir.bootlin.com/linux/latest/source/include/linux/units.h
There are only definition for milli celsius. For IIO_VAL_INT_PLUS_MICRO I would
require micro celsius.
If I have the freedom, I would keep it as it is. Else I would suggest the following:
#define AS73211_OFFSET_TEMP_INT (-66)
#define AS73211_OFFSET_TEMP_MICRO 900000
#define AS73211_SCALE_TEMP_INT 0
#define AS73211_SCALE_TEMP_MICRO 50000
> > + }}
> > +
> > + return -EINVAL;
>
> Make it default case.
changed. Is there any benefit? My IDE's syntax checker now complains
"No return, in a function returning non-void". But gcc is happy with this.
> > + ret = devm_iio_device_register(dev, indio_dev);
> > + if (ret < 0)
> > + return ret;
> > +
> > + return 0;
>
> return devm_iio_device_register();
changed. I prefer the original pattern as it would produce less changed lines
if something needs to inserted later.
On Tue, Aug 4, 2020 at 10:42 AM Christian Eggers <[email protected]> wrote:
> On Sunday, 2 August 2020, 20:02:35 CEST, Andy Shevchenko wrote:
> > On Sun, Aug 2, 2020 at 7:40 PM Christian Eggers <[email protected]> wrote:
...
> > > Datasheet:
> > > https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-
> > > b302-c2fd-e30a-c98df87616df
> > Do we need the UUID after the document file name?
> I have send AMS an inquiry. Not sure whether I will get an answer. I will wait
> a few days until sending v6.
I have successfully opened a document w/o additional UUID at the end of URI.
I think you may drop it.
...
> > > +#define AS73211_OFFSET_TEMP (-66.9)
> > > +#define AS73211_SCALE_TEMP 0.05
> >
> > In the kernel we don't do float arithmetic. How these are being used?
> Does this restriction also apply for compile time constants? I am quite
> sure that all calculations using these defines will be evaluated at compile
> time. If found a number of other places where probably the same is done:
>
> find . -name '*.c' | xargs grep "#define.*[0-9]\.[0-9]" | grep -v '"' | grep -v "\/\*.*[0-9]\.[0-9]"
Side note: `git grep ...` is much faster and better.
% git grep -n -w '#define[^"/]\+[0-9]\+\.[0-9]\+' -- drivers/ include/
arch/ | wc -l
47
+ DRM, yes.
In any case...
> > > + *val2 = (AS73211_OFFSET_TEMP - (int)AS73211_OFFSET_TEMP) *
> > > 1000000;
> > >
> > > + *val2 = (AS73211_SCALE_TEMP -
> > > (int)AS73211_SCALE_TEMP) * 1000000;
> > Magic 1000000 multiplier.
> I think that in the context of IIO_VAL_INT_PLUS_MICRO this isn't quite magic. Using
> 1000000 directly seems quite usual:
>
> find drivers/iio/ -type f | xargs grep "val2 = .*1000000"
Hmm... Okay.
> > I think here you got them always 0. And to fix that you need to
> > redefine (with also units included in the name) above constants like
> > #define ..._OFFSET_TEMP_mC 66500
> > ... _SCALE_TEMP_?? 50
> a scale factor has no unit
>
> >
> > Consider to use definitions from
> > https://elixir.bootlin.com/linux/latest/source/include/linux/units.h
> There are only definition for milli celsius. For IIO_VAL_INT_PLUS_MICRO I would
> require micro celsius.
>
> If I have the freedom, I would keep it as it is. Else I would suggest the following:
> #define AS73211_OFFSET_TEMP_INT (-66)
> #define AS73211_OFFSET_TEMP_MICRO 900000
> #define AS73211_SCALE_TEMP_INT 0
> #define AS73211_SCALE_TEMP_MICRO 50000
...somewhat like above would be better. But your freedom is defined by
maintainers (not by me), so wait for their comments.
...
> > > + }}
> > > +
> > > + return -EINVAL;
> >
> > Make it default case.
> changed. Is there any benefit? My IDE's syntax checker now complains
> "No return, in a function returning non-void". But gcc is happy with this.
Your IDE is buggy :-)
Yes, there is a benefit of doing this, at some point compiler
complains about switches that don't cover all cases.
...
> > > + ret = devm_iio_device_register(dev, indio_dev);
> > > + if (ret < 0)
> > > + return ret;
> > > +
> > > + return 0;
> >
> > return devm_iio_device_register();
> changed. I prefer the original pattern as it would produce less changed lines
> if something needs to inserted later.
But if not, it will be a bulk of several lines of code which is the
bait for all kinds of janitors and clean up scripts (I saw that IRL,
so it's not unrealistic). In that case it will be twice the churn.
--
With Best Regards,
Andy Shevchenko
On 8/4/20 9:40 AM, Christian Eggers wrote:
> On Sunday, 2 August 2020, 20:02:35 CEST, Andy Shevchenko wrote:
>> Thanks for an update, my comments below.
> Thanks for the review. Please see below for my questions.
>
> Best regards
> Christian
>
>> On Sun, Aug 2, 2020 at 7:40 PM Christian Eggers <[email protected]> wrote:
>>> Datasheet:
>>> https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-
>>> b302-c2fd-e30a-c98df87616df
>> Do we need the UUID after the document file name?
> I have send AMS an inquiry. Not sure whether I will get an answer. I will wait
> a few days until sending v6.
>
>>> +#define AS73211_OFFSET_TEMP (-66.9)
>>> +#define AS73211_SCALE_TEMP 0.05
>> In the kernel we don't do float arithmetic. How these are being used?
> Does this restriction also apply for compile time constants? I am quite
> sure that all calculations using these defines will be evaluated at compile
> time. If found a number of other places where probably the same is done:
>
> find . -name '*.c' | xargs grep "#define.*[0-9]\.[0-9]" | grep -v '"' | grep -v "\/\*.*[0-9]\.[0-9]"
I believe it is implementation defined. The compiler is free to generate
floating math and do the conversion at runtime. Although it is probably
safe to assume that no reasonable compiler will do this for your code.
If only we had constexpr in C, then there was a way to make it
guaranteed that the conversion happens during compile time.
But I agree with you, it would be nice to have a cleaner way of
declaring fixed point numbers without having to pay attention to how
many 0s you have to put after the least significant digit.