From: Alexandru Tachici <[email protected]>
Add PMBus probing driver for the adm1266 Cascadable
Super Sequencer with Margin Control and Fault Recording.
Driver is using the pmbus_core, creating sysfs files
under hwmon for inputs: vh1->vh4 and vp1->vp13.
1. Add PMBus probing driver for inputs vh1->vh4
and vp1->vp13.
2. Add Block Write-Read Process Call command.
A PMBus specific implementation was required because
block write with I2C_SMBUS_PROC_CALL flag allows a
maximum of 32 bytes to be received.
3. This makes adm1266 driver expose GPIOs
to user-space. Currently are read only. Future
developments on the firmware will allow
them to be writable.
4. Allow the current sate of the sequencer to be read
through debugfs.
5. Blackboxes are 64 bytes of chip state related data
that is generated on faults. Use the nvmem kernel api
to expose the blackbox chip functionality to userspace.
6. DT bindings for ADM1266.
Alexandru Tachici (6):
hwmon: pmbus: adm1266: add support
hwmon: pmbus: adm1266: Add Block process call
hwmon: pmbus: adm1266: Add support for GPIOs
hwmon: pmbus: adm1266: add debugfs for states
hwmon: pmbus: adm1266: read blackbox
dt-bindings: hwmon: Add bindings for ADM1266
Changelog v7 -> v8:
- removed firmware/config programming
- in adm1266_pmbus_block_xfer unlock buf mutex on error paths
- added "depends on GPIOLIB" in kconfig ("select GPIOLIB" triggers a
recursive dependency error)
- removed cell access check (only blackbox cell will be used)
- removed #if IS_ENABLED(CONFIG_NVMEM)
- dt-bindings: removed adi,master-adm1266 property
.../bindings/hwmon/adi,adm1266.yaml | 51 ++
Documentation/hwmon/adm1266.rst | 37 ++
Documentation/hwmon/index.rst | 1 +
drivers/hwmon/pmbus/Kconfig | 11 +
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/adm1266.c | 513 ++++++++++++++++++
6 files changed, 614 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
create mode 100644 Documentation/hwmon/adm1266.rst
create mode 100644 drivers/hwmon/pmbus/adm1266.c
--
2.20.1
From: Alexandru Tachici <[email protected]>
Adm1266 exposes 9 GPIOs and 16 PDIOs which are currently read-only. They
are controlled by the internal sequencing engine.
This patch makes adm1266 driver expose GPIOs and PDIOs to user-space
using GPIO provider kernel api.
Signed-off-by: Alexandru Tachici <[email protected]>
---
drivers/hwmon/pmbus/Kconfig | 1 +
drivers/hwmon/pmbus/adm1266.c | 204 ++++++++++++++++++++++++++++++++++
2 files changed, 205 insertions(+)
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index c04068b665e6..2db3a93a43ea 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -29,6 +29,7 @@ config SENSORS_PMBUS
config SENSORS_ADM1266
tristate "Analog Devices ADM1266 Sequencer"
select CRC8
+ depends on GPIOLIB
help
If you say yes here you get hardware monitoring support for Analog
Devices ADM1266 Cascadable Super Sequencer.
diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
index 9db1c317029b..7ca5aa751b7e 100644
--- a/drivers/hwmon/pmbus/adm1266.c
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -6,18 +6,42 @@
* Copyright 2020 Analog Devices Inc.
*/
+#include <linux/bitfield.h>
#include <linux/crc8.h>
+#include <linux/debugfs.h>
+#include <linux/gpio/driver.h>
#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include "pmbus.h"
#include <linux/slab.h>
+#define ADM1266_PDIO_CONFIG 0xD4
+#define ADM1266_GPIO_CONFIG 0xE1
+#define ADM1266_PDIO_STATUS 0xE9
+#define ADM1266_GPIO_STATUS 0xEA
+
+/* ADM1266 GPIO defines */
+#define ADM1266_GPIO_NR 9
+#define ADM1266_GPIO_FUNCTIONS(x) FIELD_GET(BIT(0), x)
+#define ADM1266_GPIO_INPUT_EN(x) FIELD_GET(BIT(2), x)
+#define ADM1266_GPIO_OUTPUT_EN(x) FIELD_GET(BIT(3), x)
+#define ADM1266_GPIO_OPEN_DRAIN(x) FIELD_GET(BIT(4), x)
+
+/* ADM1266 PDIO defines */
+#define ADM1266_PDIO_NR 16
+#define ADM1266_PDIO_PIN_CFG(x) FIELD_GET(GENMASK(15, 13), x)
+#define ADM1266_PDIO_GLITCH_FILT(x) FIELD_GET(GENMASK(12, 9), x)
+#define ADM1266_PDIO_OUT_CFG(x) FIELD_GET(GENMASK(2, 0), x)
+
#define ADM1266_PMBUS_BLOCK_MAX 255
struct adm1266_data {
struct pmbus_driver_info info;
+ struct gpio_chip gc;
+ const char *gpio_names[ADM1266_GPIO_NR + ADM1266_PDIO_NR];
struct i2c_client *client;
struct mutex buf_mutex;
u8 write_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned;
@@ -93,9 +117,185 @@ static int adm1266_pmbus_block_xfer(struct adm1266_data *data, u8 cmd, u8 w_len,
return ret;
}
+static const unsigned int adm1266_gpio_mapping[ADM1266_GPIO_NR][2] = {
+ {1, 0},
+ {2, 1},
+ {3, 2},
+ {4, 8},
+ {5, 9},
+ {6, 10},
+ {7, 11},
+ {8, 6},
+ {9, 7},
+};
+
+static const char *adm1266_names[ADM1266_GPIO_NR + ADM1266_PDIO_NR] = {
+ "GPIO1", "GPIO2", "GPIO3", "GPIO4", "GPIO5", "GPIO6", "GPIO7", "GPIO8",
+ "GPIO9", "PDIO1", "PDIO2", "PDIO3", "PDIO4", "PDIO5", "PDIO6",
+ "PDIO7", "PDIO8", "PDIO9", "PDIO10", "PDIO11", "PDIO12", "PDIO13",
+ "PDIO14", "PDIO15", "PDIO16",
+};
+
+static int adm1266_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct adm1266_data *data = gpiochip_get_data(chip);
+ u8 read_buf[I2C_SMBUS_BLOCK_MAX + 1];
+ unsigned long pins_status;
+ unsigned int pmbus_cmd;
+ int ret;
+
+ if (offset < ADM1266_GPIO_NR)
+ pmbus_cmd = ADM1266_GPIO_STATUS;
+ else
+ pmbus_cmd = ADM1266_PDIO_STATUS;
+
+ ret = i2c_smbus_read_block_data(data->client, pmbus_cmd, read_buf);
+ if (ret < 0)
+ return ret;
+
+ pins_status = read_buf[0] + (read_buf[1] << 8);
+ if (offset < ADM1266_GPIO_NR)
+ return test_bit(adm1266_gpio_mapping[offset][1], &pins_status);
+
+ return test_bit(offset - ADM1266_GPIO_NR, &pins_status);
+}
+
+static int adm1266_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+ unsigned long *bits)
+{
+ struct adm1266_data *data = gpiochip_get_data(chip);
+ u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1];
+ unsigned long status;
+ unsigned int gpio_nr;
+ int ret;
+
+ ret = i2c_smbus_read_block_data(data->client, ADM1266_GPIO_STATUS, read_buf);
+ if (ret < 0)
+ return ret;
+
+ status = read_buf[0] + (read_buf[1] << 8);
+
+ *bits = 0;
+ for_each_set_bit(gpio_nr, mask, ADM1266_GPIO_NR) {
+ if (test_bit(adm1266_gpio_mapping[gpio_nr][1], &status))
+ set_bit(gpio_nr, bits);
+ }
+
+ ret = i2c_smbus_read_block_data(data->client, ADM1266_PDIO_STATUS, read_buf);
+ if (ret < 0)
+ return ret;
+
+ status = read_buf[0] + (read_buf[1] << 8);
+
+ *bits = 0;
+ for_each_set_bit_from(gpio_nr, mask, ADM1266_GPIO_NR + ADM1266_PDIO_STATUS) {
+ if (test_bit(gpio_nr - ADM1266_GPIO_NR, &status))
+ set_bit(gpio_nr, bits);
+ }
+
+ return 0;
+}
+
+static void adm1266_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+ struct adm1266_data *data = gpiochip_get_data(chip);
+ u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1];
+ unsigned long gpio_config;
+ unsigned long pdio_config;
+ unsigned long pin_cfg;
+ u8 write_cmd;
+ int ret;
+ int i;
+
+ for (i = 0; i < ADM1266_GPIO_NR; i++) {
+ write_cmd = adm1266_gpio_mapping[i][1];
+ ret = adm1266_pmbus_block_xfer(data, ADM1266_GPIO_CONFIG, 1, &write_cmd, read_buf);
+ if (ret != 2)
+ return;
+
+ gpio_config = read_buf[0];
+ seq_puts(s, adm1266_names[i]);
+
+ seq_puts(s, " ( ");
+ if (!ADM1266_GPIO_FUNCTIONS(gpio_config)) {
+ seq_puts(s, "high-Z )\n");
+ continue;
+ }
+ if (ADM1266_GPIO_INPUT_EN(gpio_config))
+ seq_puts(s, "input ");
+ if (ADM1266_GPIO_OUTPUT_EN(gpio_config))
+ seq_puts(s, "output ");
+ if (ADM1266_GPIO_OPEN_DRAIN(gpio_config))
+ seq_puts(s, "open-drain )\n");
+ else
+ seq_puts(s, "push-pull )\n");
+ }
+
+ write_cmd = 0xFF;
+ ret = adm1266_pmbus_block_xfer(data, ADM1266_PDIO_CONFIG, 1, &write_cmd, read_buf);
+ if (ret != 32)
+ return;
+
+ for (i = 0; i < ADM1266_PDIO_NR; i++) {
+ seq_puts(s, adm1266_names[ADM1266_GPIO_NR + i]);
+
+ pdio_config = read_buf[2 * i];
+ pdio_config += (read_buf[2 * i + 1] << 8);
+ pin_cfg = ADM1266_PDIO_PIN_CFG(pdio_config);
+
+ seq_puts(s, " ( ");
+ if (!pin_cfg || pin_cfg > 5) {
+ seq_puts(s, "high-Z )\n");
+ continue;
+ }
+
+ if (pin_cfg & BIT(0))
+ seq_puts(s, "output ");
+
+ if (pin_cfg & BIT(1))
+ seq_puts(s, "input ");
+
+ seq_puts(s, ")\n");
+ }
+}
+
+static int adm1266_config_gpio(struct adm1266_data *data)
+{
+ const char *name = dev_name(&data->client->dev);
+ char *gpio_name;
+ int ret;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(data->gpio_names); i++) {
+ gpio_name = devm_kasprintf(&data->client->dev, GFP_KERNEL, "adm1266-%x-%s",
+ data->client->addr, adm1266_names[i]);
+ if (!gpio_name)
+ return -ENOMEM;
+
+ data->gpio_names[i] = gpio_name;
+ }
+
+ data->gc.label = name;
+ data->gc.parent = &data->client->dev;
+ data->gc.owner = THIS_MODULE;
+ data->gc.base = -1;
+ data->gc.names = data->gpio_names;
+ data->gc.ngpio = ARRAY_SIZE(data->gpio_names);
+ data->gc.get = adm1266_gpio_get;
+ data->gc.get_multiple = adm1266_gpio_get_multiple;
+ data->gc.dbg_show = adm1266_gpio_dbg_show;
+
+ ret = devm_gpiochip_add_data(&data->client->dev, &data->gc, data);
+ if (ret)
+ dev_err(&data->client->dev, "GPIO registering failed (%d)\n", ret);
+
+ return ret;
+}
+
static int adm1266_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct adm1266_data *data;
+ int ret;
int i;
data = devm_kzalloc(&client->dev, sizeof(struct adm1266_data), GFP_KERNEL);
@@ -111,6 +311,10 @@ static int adm1266_probe(struct i2c_client *client, const struct i2c_device_id *
crc8_populate_msb(pmbus_crc_table, 0x7);
mutex_init(&data->buf_mutex);
+ ret = adm1266_config_gpio(data);
+ if (ret < 0)
+ return ret;
+
return pmbus_do_probe(client, id, &data->info);
}
--
2.20.1
From: Alexandru Tachici <[email protected]>
Add a debugfs entry which prints the current state
of the adm1266 sequencer.
Signed-off-by: Alexandru Tachici <[email protected]>
---
drivers/hwmon/pmbus/adm1266.c | 41 ++++++++++++++++++++++++++++++++++-
1 file changed, 40 insertions(+), 1 deletion(-)
diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
index 7ca5aa751b7e..df7954e2ce9f 100644
--- a/drivers/hwmon/pmbus/adm1266.c
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -19,6 +19,7 @@
#include <linux/slab.h>
#define ADM1266_PDIO_CONFIG 0xD4
+#define ADM1266_READ_STATE 0xD9
#define ADM1266_GPIO_CONFIG 0xE1
#define ADM1266_PDIO_STATUS 0xE9
#define ADM1266_GPIO_STATUS 0xEA
@@ -43,6 +44,7 @@ struct adm1266_data {
struct gpio_chip gc;
const char *gpio_names[ADM1266_GPIO_NR + ADM1266_PDIO_NR];
struct i2c_client *client;
+ struct dentry *debugfs_dir;
struct mutex buf_mutex;
u8 write_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned;
u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned;
@@ -292,6 +294,37 @@ static int adm1266_config_gpio(struct adm1266_data *data)
return ret;
}
+static int adm1266_state_read(struct seq_file *s, void *pdata)
+{
+ struct device *dev = s->private;
+ struct i2c_client *client = to_i2c_client(dev);
+ int ret;
+
+ ret = i2c_smbus_read_word_data(client, ADM1266_READ_STATE);
+ if (ret < 0)
+ return ret;
+
+ seq_printf(s, "%d\n", ret);
+
+ return 0;
+}
+
+static void adm1266_init_debugfs(struct adm1266_data *data)
+{
+ struct dentry *root;
+
+ root = pmbus_get_debugfs_dir(data->client);
+ if (!root)
+ return;
+
+ data->debugfs_dir = debugfs_create_dir(data->client->name, root);
+ if (!data->debugfs_dir)
+ return;
+
+ debugfs_create_devm_seqfile(&data->client->dev, "sequencer_state", data->debugfs_dir,
+ adm1266_state_read);
+}
+
static int adm1266_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct adm1266_data *data;
@@ -315,7 +348,13 @@ static int adm1266_probe(struct i2c_client *client, const struct i2c_device_id *
if (ret < 0)
return ret;
- return pmbus_do_probe(client, id, &data->info);
+ ret = pmbus_do_probe(client, id, &data->info);
+ if (ret)
+ return ret;
+
+ adm1266_init_debugfs(data);
+
+ return 0;
}
static const struct of_device_id adm1266_of_match[] = {
--
2.20.1
From: Alexandru Tachici <[email protected]>
Add pmbus probing driver for the adm1266 Cascadable
Super Sequencer with Margin Control and Fault Recording.
Driver is using the pmbus_core, creating sysfs files
under hwmon for inputs: vh1->vh4 and vp1->vp13.
Signed-off-by: Alexandru Tachici <[email protected]>
---
Documentation/hwmon/adm1266.rst | 37 +++++++++++++++++++
Documentation/hwmon/index.rst | 1 +
drivers/hwmon/pmbus/Kconfig | 9 +++++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/adm1266.c | 65 +++++++++++++++++++++++++++++++++
5 files changed, 113 insertions(+)
create mode 100644 Documentation/hwmon/adm1266.rst
create mode 100644 drivers/hwmon/pmbus/adm1266.c
diff --git a/Documentation/hwmon/adm1266.rst b/Documentation/hwmon/adm1266.rst
new file mode 100644
index 000000000000..9257f8a48650
--- /dev/null
+++ b/Documentation/hwmon/adm1266.rst
@@ -0,0 +1,37 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver adm1266
+=====================
+
+Supported chips:
+ * Analog Devices ADM1266
+ Prefix: 'adm1266'
+ Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1266.pdf
+
+Author: Alexandru Tachici <[email protected]>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for Analog Devices ADM1266 sequencer.
+
+ADM1266 is a sequencer that features voltage readback from 17 channels via an
+integrated 12 bit SAR ADC, accessed using a PMBus interface.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write, history reset
+attributes are write-only, all other attributes are read-only.
+
+inX_label "voutx"
+inX_input Measured voltage.
+inX_min Minimum Voltage.
+inX_max Maximum voltage.
+inX_min_alarm Voltage low alarm.
+inX_max_alarm Voltage high alarm.
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 55ff4b7c5349..056f7107d7b8 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -30,6 +30,7 @@ Hardware Monitoring Kernel Drivers
adm1026
adm1031
adm1177
+ adm1266
adm1275
adm9240
ads7828
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index a337195b1c39..da34083e1ffd 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -26,6 +26,15 @@ config SENSORS_PMBUS
This driver can also be built as a module. If so, the module will
be called pmbus.
+config SENSORS_ADM1266
+ tristate "Analog Devices ADM1266 Sequencer"
+ help
+ If you say yes here you get hardware monitoring support for Analog
+ Devices ADM1266 Cascadable Super Sequencer.
+
+ This driver can also be built as a module. If so, the module will
+ be called adm1266.
+
config SENSORS_ADM1275
tristate "Analog Devices ADM1275 and compatibles"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index c4b15db996ad..da41d22be1c9 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -5,6 +5,7 @@
obj-$(CONFIG_PMBUS) += pmbus_core.o
obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
+obj-$(CONFIG_SENSORS_ADM1266) += adm1266.o
obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
obj-$(CONFIG_SENSORS_BEL_PFE) += bel-pfe.o
obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o
diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
new file mode 100644
index 000000000000..79e8d90886b8
--- /dev/null
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ADM1266 - Cascadable Super Sequencer with Margin
+ * Control and Fault Recording
+ *
+ * Copyright 2020 Analog Devices Inc.
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+#include <linux/slab.h>
+
+struct adm1266_data {
+ struct pmbus_driver_info info;
+ struct i2c_client *client;
+};
+
+static int adm1266_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct adm1266_data *data;
+ int i;
+
+ data = devm_kzalloc(&client->dev, sizeof(struct adm1266_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->client = client;
+ data->info.pages = 17;
+ data->info.format[PSC_VOLTAGE_OUT] = linear;
+ for (i = 0; i < data->info.pages; i++)
+ data->info.func[i] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+
+ return pmbus_do_probe(client, id, &data->info);
+}
+
+static const struct of_device_id adm1266_of_match[] = {
+ { .compatible = "adi,adm1266" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, adm1266_of_match);
+
+static const struct i2c_device_id adm1266_id[] = {
+ { "adm1266", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adm1266_id);
+
+static struct i2c_driver adm1266_driver = {
+ .driver = {
+ .name = "adm1266",
+ .of_match_table = adm1266_of_match,
+ },
+ .probe = adm1266_probe,
+ .remove = pmbus_do_remove,
+ .id_table = adm1266_id,
+};
+
+module_i2c_driver(adm1266_driver);
+
+MODULE_AUTHOR("Alexandru Tachici <[email protected]>");
+MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1266");
+MODULE_LICENSE("GPL v2");
--
2.20.1
From: Alexandru Tachici <[email protected]>
Add bindings for the Analog Devices ADM1266 sequencer.
Signed-off-by: Alexandru Tachici <[email protected]>
---
.../bindings/hwmon/adi,adm1266.yaml | 51 +++++++++++++++++++
1 file changed, 51 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
new file mode 100644
index 000000000000..43b4f4f57b49
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,adm1266.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADM1266 Cascadable Super Sequencer with Margin
+ Control and Fault Recording
+
+maintainers:
+ - Alexandru Tachici <[email protected]>
+
+description: |
+ Analog Devices ADM1266 Cascadable Super Sequencer with Margin
+ Control and Fault Recording.
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1266.pdf
+
+properties:
+ compatible:
+ enum:
+ - adi,adm1266
+
+ reg:
+ description: |
+ I2C address of slave device.
+ items:
+ minimum: 0x40
+ maximum: 0x4F
+
+ avcc-supply:
+ description: |
+ Phandle to the Avcc power supply.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adm1266@40 {
+ compatible = "adi,adm1266";
+ reg = <0x40>;
+ };
+ };
+...
--
2.20.1
From: Alexandru Tachici <[email protected]>
Use the nvmem kernel api to expose the black box
chip functionality to userspace.
Using this feature, the device is capable of recording
to nonvolatile flash memory the vital data about the
system status that caused the system to perform a
black box write.
A blackbox is 64 bytes of data containing all the
status registers, last two states of the sequencer,
timestamp and counters. The mapping of this data is
described in the adm1266 datasheet.
On power-up the driver sets the unix time to
the adm1266 using the SET_RTC command. This value
is incremented by an internal clock and it is used
as timestamp for the black box feature.
Signed-off-by: Alexandru Tachici <[email protected]>
---
drivers/hwmon/pmbus/adm1266.c | 127 ++++++++++++++++++++++++++++++++++
1 file changed, 127 insertions(+)
diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
index df7954e2ce9f..1d83c4f42eaf 100644
--- a/drivers/hwmon/pmbus/adm1266.c
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -15,12 +15,19 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
#include "pmbus.h"
#include <linux/slab.h>
+#include <linux/timekeeping.h>
+#define ADM1266_BLACKBOX_CONFIG 0xD3
#define ADM1266_PDIO_CONFIG 0xD4
#define ADM1266_READ_STATE 0xD9
+#define ADM1266_READ_BLACKBOX 0xDE
+#define ADM1266_SET_RTC 0xDF
#define ADM1266_GPIO_CONFIG 0xE1
+#define ADM1266_BLACKBOX_INFO 0xE6
#define ADM1266_PDIO_STATUS 0xE9
#define ADM1266_GPIO_STATUS 0xEA
@@ -37,6 +44,9 @@
#define ADM1266_PDIO_GLITCH_FILT(x) FIELD_GET(GENMASK(12, 9), x)
#define ADM1266_PDIO_OUT_CFG(x) FIELD_GET(GENMASK(2, 0), x)
+#define ADM1266_BLACKBOX_OFFSET 0
+#define ADM1266_BLACKBOX_SIZE 64
+
#define ADM1266_PMBUS_BLOCK_MAX 255
struct adm1266_data {
@@ -45,11 +55,22 @@ struct adm1266_data {
const char *gpio_names[ADM1266_GPIO_NR + ADM1266_PDIO_NR];
struct i2c_client *client;
struct dentry *debugfs_dir;
+ struct nvmem_config nvmem_config;
+ struct nvmem_device *nvmem;
+ u8 *dev_mem;
struct mutex buf_mutex;
u8 write_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned;
u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned;
};
+static const struct nvmem_cell_info adm1266_nvmem_cells[] = {
+ {
+ .name = "blackbox",
+ .offset = ADM1266_BLACKBOX_OFFSET,
+ .bytes = 2048,
+ },
+};
+
DECLARE_CRC8_TABLE(pmbus_crc_table);
/*
@@ -325,6 +346,104 @@ static void adm1266_init_debugfs(struct adm1266_data *data)
adm1266_state_read);
}
+static int adm1266_nvmem_read_blackbox(struct adm1266_data *data, u8 *read_buff)
+{
+ int record_count;
+ char index;
+ u8 buf[5];
+ int ret;
+
+ ret = i2c_smbus_read_block_data(data->client, ADM1266_BLACKBOX_INFO, buf);
+ if (ret < 0)
+ return ret;
+
+ if (ret != 4)
+ return -EIO;
+
+ record_count = buf[3];
+
+ for (index = 0; index < record_count; index++) {
+ ret = adm1266_pmbus_block_xfer(data, ADM1266_READ_BLACKBOX, 1, &index, read_buff);
+ if (ret < 0)
+ return ret;
+
+ if (ret != ADM1266_BLACKBOX_SIZE)
+ return -EIO;
+
+ read_buff += ADM1266_BLACKBOX_SIZE;
+ }
+
+ return 0;
+}
+
+static int adm1266_nvmem_read(void *priv, unsigned int offset, void *val, size_t bytes)
+{
+ struct adm1266_data *data = priv;
+ int ret;
+
+ if (offset + bytes > data->nvmem_config.size)
+ return -EINVAL;
+
+ if (offset == 0) {
+ memset(data->dev_mem, 0, data->nvmem_config.size);
+
+ ret = adm1266_nvmem_read_blackbox(data, data->dev_mem);
+ if (ret) {
+ dev_err(&data->client->dev, "Could not read blackbox!");
+ return ret;
+ }
+ }
+
+ memcpy(val, data->dev_mem + offset, bytes);
+
+ return 0;
+}
+
+static int adm1266_config_nvmem(struct adm1266_data *data)
+{
+ data->nvmem_config.name = dev_name(&data->client->dev);
+ data->nvmem_config.dev = &data->client->dev;
+ data->nvmem_config.root_only = true;
+ data->nvmem_config.read_only = true;
+ data->nvmem_config.owner = THIS_MODULE;
+ data->nvmem_config.reg_read = adm1266_nvmem_read;
+ data->nvmem_config.cells = adm1266_nvmem_cells;
+ data->nvmem_config.ncells = ARRAY_SIZE(adm1266_nvmem_cells);
+ data->nvmem_config.priv = data;
+ data->nvmem_config.stride = 1;
+ data->nvmem_config.word_size = 1;
+ data->nvmem_config.size = adm1266_nvmem_cells[0].bytes;
+
+ data->dev_mem = devm_kzalloc(&data->client->dev, data->nvmem_config.size, GFP_KERNEL);
+ if (!data->dev_mem)
+ return -ENOMEM;
+
+ data->nvmem = devm_nvmem_register(&data->client->dev, &data->nvmem_config);
+ if (IS_ERR(data->nvmem)) {
+ dev_err(&data->client->dev, "Could not register nvmem!");
+ return PTR_ERR(data->nvmem);
+ }
+
+ return 0;
+}
+
+static int adm1266_set_rtc(struct adm1266_data *data)
+{
+ time64_t kt;
+ char write_buf[6];
+ int i;
+
+ kt = ktime_get_seconds();
+
+ memset(write_buf, 0, sizeof(write_buf));
+
+ for (i = 0; i < 4; i++)
+ write_buf[2 + i] = (kt >> (i * 8)) & 0xFF;
+
+ return i2c_smbus_write_block_data(data->client, ADM1266_SET_RTC, sizeof(write_buf),
+ write_buf);
+}
+
static int adm1266_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct adm1266_data *data;
@@ -348,6 +467,14 @@ static int adm1266_probe(struct i2c_client *client, const struct i2c_device_id *
if (ret < 0)
return ret;
+ ret = adm1266_set_rtc(data);
+ if (ret < 0)
+ return ret;
+
+ ret = adm1266_config_nvmem(data);
+ if (ret < 0)
+ return ret;
+
ret = pmbus_do_probe(client, id, &data->info);
if (ret)
return ret;
--
2.20.1
From: Alexandru Tachici <[email protected]>
PmBus devices support Block Write-Block Read Process
Call described in SMBus specification v 2.0 with the
exception that Block writes and reads are permitted to
have up 255 data bytes instead of max 32 bytes (SMBus).
This patch adds Block WR process call support for ADM1266.
Signed-off-by: Alexandru Tachici <[email protected]>
---
drivers/hwmon/pmbus/Kconfig | 1 +
drivers/hwmon/pmbus/adm1266.c | 78 +++++++++++++++++++++++++++++++++++
2 files changed, 79 insertions(+)
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index da34083e1ffd..c04068b665e6 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -28,6 +28,7 @@ config SENSORS_PMBUS
config SENSORS_ADM1266
tristate "Analog Devices ADM1266 Sequencer"
+ select CRC8
help
If you say yes here you get hardware monitoring support for Analog
Devices ADM1266 Cascadable Super Sequencer.
diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
index 79e8d90886b8..9db1c317029b 100644
--- a/drivers/hwmon/pmbus/adm1266.c
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -6,6 +6,7 @@
* Copyright 2020 Analog Devices Inc.
*/
+#include <linux/crc8.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -13,11 +14,85 @@
#include "pmbus.h"
#include <linux/slab.h>
+#define ADM1266_PMBUS_BLOCK_MAX 255
+
struct adm1266_data {
struct pmbus_driver_info info;
struct i2c_client *client;
+ struct mutex buf_mutex;
+ u8 write_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned;
+ u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned;
};
+DECLARE_CRC8_TABLE(pmbus_crc_table);
+
+/*
+ * Different from Block Read as it sends data and waits for the slave to
+ * return a value dependent on that data. The protocol is simply a Write Block
+ * followed by a Read Block without the Read-Block command field and the
+ * Write-Block STOP bit.
+ */
+static int adm1266_pmbus_block_xfer(struct adm1266_data *data, u8 cmd, u8 w_len, u8 *data_w,
+ u8 *data_r)
+{
+ struct i2c_client *client = data->client;
+ struct i2c_msg msgs[2] = {
+ {
+ .addr = client->addr,
+ .flags = I2C_M_DMA_SAFE,
+ .buf = data->write_buf,
+ .len = w_len + 2,
+ },
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD | I2C_M_DMA_SAFE,
+ .buf = data->read_buf,
+ .len = ADM1266_PMBUS_BLOCK_MAX + 2,
+ }
+ };
+ u8 addr;
+ u8 crc;
+ int ret;
+
+ mutex_lock(&data->buf_mutex);
+
+ msgs[0].buf[0] = cmd;
+ msgs[0].buf[1] = w_len;
+ memcpy(&msgs[0].buf[2], data_w, w_len);
+
+ ret = i2c_transfer(client->adapter, msgs, 2);
+ if (ret != 2) {
+ if (ret >= 0)
+ ret = -EPROTO;
+
+ mutex_unlock(&data->buf_mutex);
+
+ return ret;
+ }
+
+ if (client->flags & I2C_CLIENT_PEC) {
+ addr = i2c_8bit_addr_from_msg(&msgs[0]);
+ crc = crc8(pmbus_crc_table, &addr, 1, 0);
+ crc = crc8(pmbus_crc_table, msgs[0].buf, msgs[0].len, crc);
+
+ addr = i2c_8bit_addr_from_msg(&msgs[1]);
+ crc = crc8(pmbus_crc_table, &addr, 1, crc);
+ crc = crc8(pmbus_crc_table, msgs[1].buf, msgs[1].buf[0] + 1, crc);
+
+ if (crc != msgs[1].buf[msgs[1].buf[0] + 1]) {
+ mutex_unlock(&data->buf_mutex);
+ return -EBADMSG;
+ }
+ }
+
+ memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]);
+
+ ret = msgs[1].buf[0];
+ mutex_unlock(&data->buf_mutex);
+
+ return ret;
+}
+
static int adm1266_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct adm1266_data *data;
@@ -33,6 +108,9 @@ static int adm1266_probe(struct i2c_client *client, const struct i2c_device_id *
for (i = 0; i < data->info.pages; i++)
data->info.func[i] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+ crc8_populate_msb(pmbus_crc_table, 0x7);
+ mutex_init(&data->buf_mutex);
+
return pmbus_do_probe(client, id, &data->info);
}
--
2.20.1
On Wed, 12 Aug 2020 17:20:55 +0300, [email protected] wrote:
> From: Alexandru Tachici <[email protected]>
>
> Add bindings for the Analog Devices ADM1266 sequencer.
>
> Signed-off-by: Alexandru Tachici <[email protected]>
> ---
> .../bindings/hwmon/adi,adm1266.yaml | 51 +++++++++++++++++++
> 1 file changed, 51 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
>
Reviewed-by: Rob Herring <[email protected]>
On Wed, Aug 12, 2020 at 05:20:49PM +0300, [email protected] wrote:
> From: Alexandru Tachici <[email protected]>
>
> Add PMBus probing driver for the adm1266 Cascadable
> Super Sequencer with Margin Control and Fault Recording.
> Driver is using the pmbus_core, creating sysfs files
> under hwmon for inputs: vh1->vh4 and vp1->vp13.
>
Series applied.
Thanks,
Guenter