Add support for DTS bindings to the shtc driver
The patches add the compatible table and of_property_read_bool to the
shtc1.c. Newly created Yaml document has been released to the
Documentation/devicetree/hwmon/sensirion,shtc1.yaml
Signed-off-by: Chris Ruehl <[email protected]>
---
Version 8
sensirion,shtc1.yaml:
Correction in commit text s/_/-/ (sensirion,low-precision)
Maintainer my full name
Add additionalProperties: false
Simplify example i2c1 { -> i2c {
Version 7
make dt_binding_check warnings, missing #address-cells, #size-cells in example
dtschema-2020.7.dev3+g8fd8ce7
Version 6
fix dt_binding_check: missing ';' in examples
Version 5
devicetree/driver-source: name conversion sensirion,low-precision sensirion,blocking-io
use const: 0x70 with the reg:
Version 4
Fix errors report by make dt_binding_check (devicetree)
Set maintainers for the yaml document to my own.
Version 3
Fix errors report with checkpatch.pl
Correct logic, add (!) when check for sensirion,low_precision
Version 2
remove the #ifdef CONFIG_OF
ignore platform data if dev->of_node is valid
use boolean only therefor use sensirion,low_precise to fit the logic
add missing driver.of_match_table entry
Version 1
initial version
Add documentation for the newly added DTS support in the shtc1 driver.
To align with the drivers logic to have high precision by default
a boolean sensirion,low-precision is used to switch to low precision.
Signed-off-by: Chris Ruehl <[email protected]>
---
.../bindings/hwmon/sensirion,shtc1.yaml | 61 +++++++++++++++++++
1 file changed, 61 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
new file mode 100644
index 000000000000..c523a1beb2b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/sensirion,shtc1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SHTC1 Humidity and Temperature Sensor IC
+
+maintainers:
+ - Christopher Ruehl [email protected]
+
+description: |
+ The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor
+ designed especially for battery-driven high-volume consumer electronics
+ applications.
+ For further information refere to Documentation/hwmon/shtc1.rst
+
+ This binding document describes the binding for the hardware monitor
+ portion of the driver.
+
+properties:
+ compatible:
+ enum:
+ - sensirion,shtc1
+ - sensirion,shtw1
+ - sensirion,shtc3
+
+ reg:
+ const: 0x70
+
+ sensirion,blocking-io:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ If set, the driver hold the i2c bus until measurement is finished.
+
+ sensirion,low-precision:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ If set, the sensor aquire data with low precision (not recommended).
+ The driver aquire data with high precision by default.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+
+ shtc3@70 {
+ compatible = "sensirion,shtc3";
+ reg = <0x70>;
+ sensirion,blocking-io;
+ };
+ };
+...
--
2.20.1
Add support for DTS bindings for the sensirion shtc1,shtw1 and shtc3.
Signed-off-by: Chris Ruehl <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
---
v8: no change
drivers/hwmon/shtc1.c | 25 ++++++++++++++++++++++---
1 file changed, 22 insertions(+), 3 deletions(-)
diff --git a/drivers/hwmon/shtc1.c b/drivers/hwmon/shtc1.c
index a0078ccede03..7993a5ff8768 100644
--- a/drivers/hwmon/shtc1.c
+++ b/drivers/hwmon/shtc1.c
@@ -14,6 +14,7 @@
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/platform_data/shtc1.h>
+#include <linux/of.h>
/* commands (high precision mode) */
static const unsigned char shtc1_cmd_measure_blocking_hpm[] = { 0x7C, 0xA2 };
@@ -196,6 +197,7 @@ static int shtc1_probe(struct i2c_client *client,
enum shtcx_chips chip = id->driver_data;
struct i2c_adapter *adap = client->adapter;
struct device *dev = &client->dev;
+ struct device_node *np = dev->of_node;
if (!i2c_check_functionality(adap, I2C_FUNC_I2C)) {
dev_err(dev, "plain i2c transactions not supported\n");
@@ -233,8 +235,14 @@ static int shtc1_probe(struct i2c_client *client,
data->client = client;
data->chip = chip;
- if (client->dev.platform_data)
- data->setup = *(struct shtc1_platform_data *)dev->platform_data;
+ if (np) {
+ data->setup.blocking_io = of_property_read_bool(np, "sensirion,blocking-io");
+ data->setup.high_precision = !of_property_read_bool(np, "sensicon,low-precision");
+ } else {
+ if (client->dev.platform_data)
+ data->setup = *(struct shtc1_platform_data *)dev->platform_data;
+ }
+
shtc1_select_command(data);
mutex_init(&data->update_lock);
@@ -257,8 +265,19 @@ static const struct i2c_device_id shtc1_id[] = {
};
MODULE_DEVICE_TABLE(i2c, shtc1_id);
+static const struct of_device_id shtc1_of_match[] = {
+ { .compatible = "sensirion,shtc1" },
+ { .compatible = "sensirion,shtw1" },
+ { .compatible = "sensirion,shtc3" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, shtc1_of_match);
+
static struct i2c_driver shtc1_i2c_driver = {
- .driver.name = "shtc1",
+ .driver = {
+ .name = "shtc1",
+ .of_match_table = shtc1_of_match,
+ },
.probe = shtc1_probe,
.id_table = shtc1_id,
};
--
2.20.1
On Sat, 15 Aug 2020 09:22:27 +0800, Chris Ruehl wrote:
> Add documentation for the newly added DTS support in the shtc1 driver.
> To align with the drivers logic to have high precision by default
> a boolean sensirion,low-precision is used to switch to low precision.
>
> Signed-off-by: Chris Ruehl <[email protected]>
> ---
> .../bindings/hwmon/sensirion,shtc1.yaml | 61 +++++++++++++++++++
> 1 file changed, 61 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
>
Reviewed-by: Rob Herring <[email protected]>
On Sat, Aug 15, 2020 at 09:22:26AM +0800, Chris Ruehl wrote:
> Add support for DTS bindings for the sensirion shtc1,shtw1 and shtc3.
>
> Signed-off-by: Chris Ruehl <[email protected]>
> Reviewed-by: Guenter Roeck <[email protected]>
Applied.
Thanks,
Guenter
> ---
> v8: no change
>
> drivers/hwmon/shtc1.c | 25 ++++++++++++++++++++++---
> 1 file changed, 22 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/hwmon/shtc1.c b/drivers/hwmon/shtc1.c
> index a0078ccede03..7993a5ff8768 100644
> --- a/drivers/hwmon/shtc1.c
> +++ b/drivers/hwmon/shtc1.c
> @@ -14,6 +14,7 @@
> #include <linux/err.h>
> #include <linux/delay.h>
> #include <linux/platform_data/shtc1.h>
> +#include <linux/of.h>
>
> /* commands (high precision mode) */
> static const unsigned char shtc1_cmd_measure_blocking_hpm[] = { 0x7C, 0xA2 };
> @@ -196,6 +197,7 @@ static int shtc1_probe(struct i2c_client *client,
> enum shtcx_chips chip = id->driver_data;
> struct i2c_adapter *adap = client->adapter;
> struct device *dev = &client->dev;
> + struct device_node *np = dev->of_node;
>
> if (!i2c_check_functionality(adap, I2C_FUNC_I2C)) {
> dev_err(dev, "plain i2c transactions not supported\n");
> @@ -233,8 +235,14 @@ static int shtc1_probe(struct i2c_client *client,
> data->client = client;
> data->chip = chip;
>
> - if (client->dev.platform_data)
> - data->setup = *(struct shtc1_platform_data *)dev->platform_data;
> + if (np) {
> + data->setup.blocking_io = of_property_read_bool(np, "sensirion,blocking-io");
> + data->setup.high_precision = !of_property_read_bool(np, "sensicon,low-precision");
> + } else {
> + if (client->dev.platform_data)
> + data->setup = *(struct shtc1_platform_data *)dev->platform_data;
> + }
> +
> shtc1_select_command(data);
> mutex_init(&data->update_lock);
>
> @@ -257,8 +265,19 @@ static const struct i2c_device_id shtc1_id[] = {
> };
> MODULE_DEVICE_TABLE(i2c, shtc1_id);
>
> +static const struct of_device_id shtc1_of_match[] = {
> + { .compatible = "sensirion,shtc1" },
> + { .compatible = "sensirion,shtw1" },
> + { .compatible = "sensirion,shtc3" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, shtc1_of_match);
> +
> static struct i2c_driver shtc1_i2c_driver = {
> - .driver.name = "shtc1",
> + .driver = {
> + .name = "shtc1",
> + .of_match_table = shtc1_of_match,
> + },
> .probe = shtc1_probe,
> .id_table = shtc1_id,
> };
On Sat, Aug 15, 2020 at 09:22:27AM +0800, Chris Ruehl wrote:
> Add documentation for the newly added DTS support in the shtc1 driver.
> To align with the drivers logic to have high precision by default
> a boolean sensirion,low-precision is used to switch to low precision.
>
> Signed-off-by: Chris Ruehl <[email protected]>
> Reviewed-by: Rob Herring <[email protected]>
Applied.
Thanks,
Guenter
> ---
> .../bindings/hwmon/sensirion,shtc1.yaml | 61 +++++++++++++++++++
> 1 file changed, 61 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
>
> diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
> new file mode 100644
> index 000000000000..c523a1beb2b7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
> @@ -0,0 +1,61 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/hwmon/sensirion,shtc1.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sensirion SHTC1 Humidity and Temperature Sensor IC
> +
> +maintainers:
> + - Christopher Ruehl [email protected]
> +
> +description: |
> + The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor
> + designed especially for battery-driven high-volume consumer electronics
> + applications.
> + For further information refere to Documentation/hwmon/shtc1.rst
> +
> + This binding document describes the binding for the hardware monitor
> + portion of the driver.
> +
> +properties:
> + compatible:
> + enum:
> + - sensirion,shtc1
> + - sensirion,shtw1
> + - sensirion,shtc3
> +
> + reg:
> + const: 0x70
> +
> + sensirion,blocking-io:
> + $ref: /schemas/types.yaml#definitions/flag
> + description:
> + If set, the driver hold the i2c bus until measurement is finished.
> +
> + sensirion,low-precision:
> + $ref: /schemas/types.yaml#definitions/flag
> + description:
> + If set, the sensor aquire data with low precision (not recommended).
> + The driver aquire data with high precision by default.
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clock-frequency = <400000>;
> +
> + shtc3@70 {
> + compatible = "sensirion,shtc3";
> + reg = <0x70>;
> + sensirion,blocking-io;
> + };
> + };
> +...