This makes it easier to combine dt bindings for sdm845/sc7180 dispcc.
Note: nothing upstream provides these clocks and the sdm845 dispcc driver
hasn't switched to using .fw_name for these clocks (these properties are
ignored), so changing this shouldn't be a problem.
Signed-off-by: Jonathan Marek <[email protected]>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 2884577dcb77..8184d6204b33 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4139,8 +4139,8 @@ dispcc: clock-controller@af00000 {
"dsi0_phy_pll_out_dsiclk",
"dsi1_phy_pll_out_byteclk",
"dsi1_phy_pll_out_dsiclk",
- "dp_link_clk_divsel_ten",
- "dp_vco_divided_clk_src_mux";
+ "dp_phy_pll_link_clk",
+ "dp_phy_pll_vco_div_clk";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
--
2.26.1