2020-09-09 20:32:44

by Eddie James

Subject: [PATCH v3 5/5] ARM: dts: Aspeed: Rainier: Add IBM Operation Panel I2C device

Set I2C bus 7 to multi-master mode and add the panel device that will
register as a slave.

Signed-off-by: Eddie James <[email protected]>
Reviewed-by: Joel Stanley <[email protected]>
---
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index b94421f6cbd5..50d528444f5d 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -4,6 +4,7 @@

#include "aspeed-g6.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
#include <dt-bindings/leds/leds-pca955x.h>

/ {
@@ -698,6 +699,7 @@ eeprom@53 {
};

&i2c7 {
+ multi-master;
status = "okay";

si7021-a20@20 {
@@ -831,6 +833,11 @@ gpio@15 {
};
};

+ ibm-panel@62 {
+ compatible = "ibm,op-panel";
+ reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
+
dps: dps310@76 {
compatible = "infineon,dps310";
reg = <0x76>;
--
2.26.2

2020-09-10 02:46:39

by Joel Stanley

Subject: Re: [PATCH v3 5/5] ARM: dts: Aspeed: Rainier: Add IBM Operation Panel I2C device

On Wed, 9 Sep 2020 at 20:31, Eddie James <[email protected]> wrote:
>
> Set I2C bus 7 to multi-master mode and add the panel device that will
> register as a slave.
>
> Signed-off-by: Eddie James <[email protected]>
> Reviewed-by: Joel Stanley <[email protected]>

Applied to the aspeed tree for v5.10.

Cheers,

Joel

> ---
> arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> index b94421f6cbd5..50d528444f5d 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> @@ -4,6 +4,7 @@
>
> #include "aspeed-g6.dtsi"
> #include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/i2c/i2c.h>
> #include <dt-bindings/leds/leds-pca955x.h>
>
> / {
> @@ -698,6 +699,7 @@ eeprom@53 {
> };
>
> &i2c7 {
> + multi-master;
> status = "okay";
>
> si7021-a20@20 {
> @@ -831,6 +833,11 @@ gpio@15 {
> };
> };
>
> + ibm-panel@62 {
> + compatible = "ibm,op-panel";
> + reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
> + };
> +
> dps: dps310@76 {
> compatible = "infineon,dps310";
> reg = <0x76>;
> --
> 2.26.2
>