The address and size cells infomation in CSI subnode is not necessary
(because the camera subnode has no reg property).
Drop them.
Signed-off-by: Icenowy Zheng <[email protected]>
---
arch/arm/boot/dts/sun8i-s3-pinecube.dts | 3 ---
1 file changed, 3 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/sun8i-s3-pinecube.dts
index 9bab6b7f4014..76c8a29e355b 100644
--- a/arch/arm/boot/dts/sun8i-s3-pinecube.dts
+++ b/arch/arm/boot/dts/sun8i-s3-pinecube.dts
@@ -64,9 +64,6 @@ &csi1 {
status = "okay";
port {
- #address-cells = <1>;
- #size-cells = <0>;
-
csi1_ep: endpoint {
remote-endpoint = <&ov5640_ep>;
bus-width = <8>;
--
2.28.0