Before the commit:
net: phy: realtek: fix rtl8211e rx/tx delay config
The software overwrite for RX/TX delays of the RTL8211e were not
working properly and the Beelink GS1 had both RX/TX delay of RGMII
interface set using pull-up on the TXDLY and RXDLY pins.
Now that these delays are working properly they overwrite the HW
config and set this to 'rgmii' meaning no delay on both RX/TX.
This makes the ethernet of this board not working anymore.
Set the phy-mode to 'rgmii-id' meaning RGMII with RX/TX delays
in the device-tree to keep the correct configuration.
Fixes: 089bee8dd119 ("arm64: dts: allwinner: h6: Introduce Beelink GS1 board")
Signed-off-by: Clément Péron <[email protected]>
---
arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index a364cb4e5b3f..6ab53860e447 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -99,7 +99,7 @@ &ehci0 {
&emac {
pinctrl-names = "default";
pinctrl-0 = <&ext_rgmii_pins>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <®_aldo2>;
status = "okay";
--
2.25.1
Hi,
On Sun, 18 Oct 2020 at 19:24, Clément Péron <[email protected]> wrote:
>
> Before the commit:
> net: phy: realtek: fix rtl8211e rx/tx delay config
bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config")
With the hash for reference it's better :)
Clement
>
> The software overwrite for RX/TX delays of the RTL8211e were not
> working properly and the Beelink GS1 had both RX/TX delay of RGMII
> interface set using pull-up on the TXDLY and RXDLY pins.
>
> Now that these delays are working properly they overwrite the HW
> config and set this to 'rgmii' meaning no delay on both RX/TX.
> This makes the ethernet of this board not working anymore.
>
> Set the phy-mode to 'rgmii-id' meaning RGMII with RX/TX delays
> in the device-tree to keep the correct configuration.
>
> Fixes: 089bee8dd119 ("arm64: dts: allwinner: h6: Introduce Beelink GS1 board")
> Signed-off-by: Clément Péron <[email protected]>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> index a364cb4e5b3f..6ab53860e447 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> @@ -99,7 +99,7 @@ &ehci0 {
> &emac {
> pinctrl-names = "default";
> pinctrl-0 = <&ext_rgmii_pins>;
> - phy-mode = "rgmii";
> + phy-mode = "rgmii-id";
> phy-handle = <&ext_rgmii_phy>;
> phy-supply = <®_aldo2>;
> status = "okay";
> --
> 2.25.1
>
On Mon, Oct 19, 2020 at 1:57 AM Clément Péron <[email protected]> wrote:
>
> Hi,
>
> On Sun, 18 Oct 2020 at 19:24, Clément Péron <[email protected]> wrote:
> >
> > Before the commit:
> > net: phy: realtek: fix rtl8211e rx/tx delay config
> bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config")
>
> With the hash for reference it's better :)
> Clement
>
> >
> > The software overwrite for RX/TX delays of the RTL8211e were not
> > working properly and the Beelink GS1 had both RX/TX delay of RGMII
> > interface set using pull-up on the TXDLY and RXDLY pins.
> >
> > Now that these delays are working properly they overwrite the HW
> > config and set this to 'rgmii' meaning no delay on both RX/TX.
> > This makes the ethernet of this board not working anymore.
> >
> > Set the phy-mode to 'rgmii-id' meaning RGMII with RX/TX delays
> > in the device-tree to keep the correct configuration.
> >
> > Fixes: 089bee8dd119 ("arm64: dts: allwinner: h6: Introduce Beelink GS1 board")
> > Signed-off-by: Clément Péron <[email protected]>
Acked-by: Chen-Yu Tsai <[email protected]>
For reference, the driver fix for dwmac enabling the other RGMII modes
f1239d8aa84d ("net: stmmac: dwmac-sun8i: Allow all RGMII modes")
was merged in v5.5 and was backported to relevant stable kernels.
> > ---
> > arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> > index a364cb4e5b3f..6ab53860e447 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> > @@ -99,7 +99,7 @@ &ehci0 {
> > &emac {
> > pinctrl-names = "default";
> > pinctrl-0 = <&ext_rgmii_pins>;
> > - phy-mode = "rgmii";
> > + phy-mode = "rgmii-id";
> > phy-handle = <&ext_rgmii_phy>;
> > phy-supply = <®_aldo2>;
> > status = "okay";
> > --
> > 2.25.1
> >
On Sun, Oct 18, 2020 at 07:24:09PM +0200, Cl?ment P?ron wrote:
> Before the commit:
> net: phy: realtek: fix rtl8211e rx/tx delay config
>
> The software overwrite for RX/TX delays of the RTL8211e were not
> working properly and the Beelink GS1 had both RX/TX delay of RGMII
> interface set using pull-up on the TXDLY and RXDLY pins.
>
> Now that these delays are working properly they overwrite the HW
> config and set this to 'rgmii' meaning no delay on both RX/TX.
> This makes the ethernet of this board not working anymore.
>
> Set the phy-mode to 'rgmii-id' meaning RGMII with RX/TX delays
> in the device-tree to keep the correct configuration.
>
> Fixes: 089bee8dd119 ("arm64: dts: allwinner: h6: Introduce Beelink GS1 board")
> Signed-off-by: Cl?ment P?ron <[email protected]>
Fixed the commit ID and queued as a fix for 5.10
Maxime