The Innolux N125HCE-GN1 display is used in the MNT Reform 2.0 laptop,
attached via eDP to a SN65DSI86 MIPI-DSI to eDP bridge.
Signed-off-by: Lukas F. Hartmann <[email protected]>
---
drivers/gpu/drm/panel/panel-simple.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 2be358fb4..774acab52 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2263,6 +2263,31 @@ static const struct panel_desc innolux_n116bge = {
},
};
+static const struct drm_display_mode innolux_n125hce_gn1_mode = {
+ .clock = 162000,
+ .hdisplay = 1920,
+ .hsync_start = 1920 + 40,
+ .hsync_end = 1920 + 40 + 40,
+ .htotal = 1920 + 40 + 40 + 80,
+ .vdisplay = 1080,
+ .vsync_start = 1080 + 4,
+ .vsync_end = 1080 + 4 + 4,
+ .vtotal = 1080 + 4 + 4 + 24,
+};
+
+static const struct panel_desc innolux_n125hce_gn1 = {
+ .modes = &innolux_n125hce_gn1_mode,
+ .num_modes = 1,
+ .bpc = 8,
+ .size = {
+ .width = 276,
+ .height = 155,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+ .bus_flags = DRM_BUS_FLAG_DATA_MSB_TO_LSB,
+ .connector_type = DRM_MODE_CONNECTOR_eDP,
+};
+
static const struct drm_display_mode innolux_n156bge_l21_mode = {
.clock = 69300,
.hdisplay = 1366,
@@ -4092,6 +4117,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "innolux,n116bge",
.data = &innolux_n116bge,
+ }, {
+ .compatible = "innolux,n125hce-gn1",
+ .data = &innolux_n125hce_gn1,
}, {
.compatible = "innolux,n156bge-l21",
.data = &innolux_n156bge_l21,
--
2.28.0
Hi Lukas.
On Tue, Nov 24, 2020 at 06:26:04PM +0100, Lukas F. Hartmann wrote:
> The Innolux N125HCE-GN1 display is used in the MNT Reform 2.0 laptop,
> attached via eDP to a SN65DSI86 MIPI-DSI to eDP bridge.
>
> Signed-off-by: Lukas F. Hartmann <[email protected]>
Danke, applied to drm-misc-next.
Sam