at91_adc_probe_dt is now small enough to be merged back in at91_adc_probe.
Signed-off-by: Alexandre Belloni <[email protected]>
Reviewed-by: Ludovic Desroches <[email protected]>
---
drivers/iio/adc/at91_adc.c | 115 ++++++++++++++++---------------------
1 file changed, 48 insertions(+), 67 deletions(-)
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index d746a18143cd..70750abb5dea 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -831,69 +831,6 @@ static int at91_adc_probe_dt_ts(struct device_node *node,
}
}
-static int at91_adc_probe_dt(struct iio_dev *idev,
- struct platform_device *pdev)
-{
- struct at91_adc_state *st = iio_priv(idev);
- struct device_node *node = pdev->dev.of_node;
- int ret;
- u32 prop;
- char *s;
-
- st->caps = of_device_get_match_data(&pdev->dev);
-
- st->use_external = of_property_read_bool(node, "atmel,adc-use-external-triggers");
-
- if (of_property_read_u32(node, "atmel,adc-channels-used", &prop)) {
- dev_err(&idev->dev, "Missing adc-channels-used property in the DT.\n");
- ret = -EINVAL;
- goto error_ret;
- }
- st->channels_mask = prop;
-
- st->sleep_mode = of_property_read_bool(node, "atmel,adc-sleep-mode");
-
- if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) {
- dev_err(&idev->dev, "Missing adc-startup-time property in the DT.\n");
- ret = -EINVAL;
- goto error_ret;
- }
- st->startup_time = prop;
-
- prop = 0;
- of_property_read_u32(node, "atmel,adc-sample-hold-time", &prop);
- st->sample_hold_time = prop;
-
- if (of_property_read_u32(node, "atmel,adc-vref", &prop)) {
- dev_err(&idev->dev, "Missing adc-vref property in the DT.\n");
- ret = -EINVAL;
- goto error_ret;
- }
- st->vref_mv = prop;
-
- st->res = st->caps->high_res_bits;
- if (st->caps->low_res_bits &&
- !of_property_read_string(node, "atmel,adc-use-res", (const char **)&s)
- && !strcmp(s, "lowres"))
- st->res = st->caps->low_res_bits;
-
- dev_info(&idev->dev, "Resolution used: %u bits\n", st->res);
-
- st->registers = &st->caps->registers;
- st->num_channels = st->caps->num_channels;
-
- /* Check if touchscreen is supported. */
- if (st->caps->has_ts)
- return at91_adc_probe_dt_ts(node, st, &idev->dev);
- else
- dev_info(&idev->dev, "not support touchscreen in the adc compatible string.\n");
-
- return 0;
-
-error_ret:
- return ret;
-}
-
static const struct iio_info at91_adc_info = {
.read_raw = &at91_adc_read_raw,
};
@@ -1059,10 +996,12 @@ static void at91_ts_unregister(struct at91_adc_state *st)
static int at91_adc_probe(struct platform_device *pdev)
{
unsigned int prsc, mstrclk, ticks, adc_clk, adc_clk_khz, shtim;
+ struct device_node *node = pdev->dev.of_node;
int ret;
struct iio_dev *idev;
struct at91_adc_state *st;
- u32 reg;
+ u32 reg, prop;
+ char *s;
idev = devm_iio_device_alloc(&pdev->dev, sizeof(struct at91_adc_state));
if (!idev)
@@ -1070,9 +1009,51 @@ static int at91_adc_probe(struct platform_device *pdev)
st = iio_priv(idev);
- ret = at91_adc_probe_dt(idev, pdev);
- if (ret)
- return ret;
+ st->caps = of_device_get_match_data(&pdev->dev);
+
+ st->use_external = of_property_read_bool(node, "atmel,adc-use-external-triggers");
+
+ if (of_property_read_u32(node, "atmel,adc-channels-used", &prop)) {
+ dev_err(&idev->dev, "Missing adc-channels-used property in the DT.\n");
+ return -EINVAL;
+ }
+ st->channels_mask = prop;
+
+ st->sleep_mode = of_property_read_bool(node, "atmel,adc-sleep-mode");
+
+ if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) {
+ dev_err(&idev->dev, "Missing adc-startup-time property in the DT.\n");
+ return -EINVAL;
+ }
+ st->startup_time = prop;
+
+ prop = 0;
+ of_property_read_u32(node, "atmel,adc-sample-hold-time", &prop);
+ st->sample_hold_time = prop;
+
+ if (of_property_read_u32(node, "atmel,adc-vref", &prop)) {
+ dev_err(&idev->dev, "Missing adc-vref property in the DT.\n");
+ return -EINVAL;
+ }
+ st->vref_mv = prop;
+
+ st->res = st->caps->high_res_bits;
+ if (st->caps->low_res_bits &&
+ !of_property_read_string(node, "atmel,adc-use-res", (const char **)&s)
+ && !strcmp(s, "lowres"))
+ st->res = st->caps->low_res_bits;
+
+ dev_info(&idev->dev, "Resolution used: %u bits\n", st->res);
+
+ st->registers = &st->caps->registers;
+ st->num_channels = st->caps->num_channels;
+
+ /* Check if touchscreen is supported. */
+ if (st->caps->has_ts) {
+ ret = at91_adc_probe_dt_ts(node, st, &idev->dev);
+ if (ret)
+ return ret;
+ }
platform_set_drvdata(pdev, idev);
--
2.28.0