Up until the these limits were global/hard-coded, since they are typically
limits of the fabric.
However, since this is an FPGA generated clock, this may run on setups
where one clock is on a fabric, and another one synthesized on another
fabric connected via PCIe (or some other inter-connect, and then these
limits need to be adjusted for each instance of the AXI CLKGEN.
This change wraps the current constants in 'axi_clkgen_limits' struct and
the 'axi_clkgen' instance keeps a copy of these limits, which is
initialized at probe from the default limits.
The limits are stored on the device-tree OF table, so that we can adjust
them via the compatible string.
Signed-off-by: Alexandru Ardelean <[email protected]>
---
Initial send:
https://lore.kernel.org/linux-clk/[email protected]/
drivers/clk/clk-axi-clkgen.c | 48 +++++++++++++++++++++++-------------
1 file changed, 31 insertions(+), 17 deletions(-)
diff --git a/drivers/clk/clk-axi-clkgen.c b/drivers/clk/clk-axi-clkgen.c
index 14d803e6af62..963a62e9c728 100644
--- a/drivers/clk/clk-axi-clkgen.c
+++ b/drivers/clk/clk-axi-clkgen.c
@@ -46,9 +46,17 @@
#define MMCM_CLK_DIV_DIVIDE BIT(11)
#define MMCM_CLK_DIV_NOCOUNT BIT(12)
+struct axi_clkgen_limits {
+ unsigned int fpfd_min;
+ unsigned int fpfd_max;
+ unsigned int fvco_min;
+ unsigned int fvco_max;
+};
+
struct axi_clkgen {
void __iomem *base;
struct clk_hw clk_hw;
+ struct axi_clkgen_limits limits;
};
static uint32_t axi_clkgen_lookup_filter(unsigned int m)
@@ -100,12 +108,15 @@ static uint32_t axi_clkgen_lookup_lock(unsigned int m)
return 0x1f1f00fa;
}
-static const unsigned int fpfd_min = 10000;
-static const unsigned int fpfd_max = 300000;
-static const unsigned int fvco_min = 600000;
-static const unsigned int fvco_max = 1200000;
+static const struct axi_clkgen_limits axi_clkgen_zynq_default_limits = {
+ .fpfd_min = 10000,
+ .fpfd_max = 300000,
+ .fvco_min = 600000,
+ .fvco_max = 1200000,
+};
-static void axi_clkgen_calc_params(unsigned long fin, unsigned long fout,
+static void axi_clkgen_calc_params(const struct axi_clkgen_limits *limits,
+ unsigned long fin, unsigned long fout,
unsigned int *best_d, unsigned int *best_m, unsigned int *best_dout)
{
unsigned long d, d_min, d_max, _d_min, _d_max;
@@ -122,12 +133,12 @@ static void axi_clkgen_calc_params(unsigned long fin, unsigned long fout,
*best_m = 0;
*best_dout = 0;
- d_min = max_t(unsigned long, DIV_ROUND_UP(fin, fpfd_max), 1);
- d_max = min_t(unsigned long, fin / fpfd_min, 80);
+ d_min = max_t(unsigned long, DIV_ROUND_UP(fin, limits->fpfd_max), 1);
+ d_max = min_t(unsigned long, fin / limits->fpfd_min, 80);
again:
- fvco_min_fract = fvco_min << fract_shift;
- fvco_max_fract = fvco_max << fract_shift;
+ fvco_min_fract = limits->fvco_min << fract_shift;
+ fvco_max_fract = limits->fvco_max << fract_shift;
m_min = max_t(unsigned long, DIV_ROUND_UP(fvco_min_fract, fin) * d_min, 1);
m_max = min_t(unsigned long, fvco_max_fract * d_max / fin, 64 << fract_shift);
@@ -319,6 +330,7 @@ static int axi_clkgen_set_rate(struct clk_hw *clk_hw,
unsigned long rate, unsigned long parent_rate)
{
struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw);
+ const struct axi_clkgen_limits *limits = &axi_clkgen->limits;
unsigned int d, m, dout;
struct axi_clkgen_div_params params;
uint32_t power = 0;
@@ -328,7 +340,7 @@ static int axi_clkgen_set_rate(struct clk_hw *clk_hw,
if (parent_rate == 0 || rate == 0)
return -EINVAL;
- axi_clkgen_calc_params(parent_rate, rate, &d, &m, &dout);
+ axi_clkgen_calc_params(limits, parent_rate, rate, &d, &m, &dout);
if (d == 0 || dout == 0 || m == 0)
return -EINVAL;
@@ -368,10 +380,12 @@ static int axi_clkgen_set_rate(struct clk_hw *clk_hw,
static long axi_clkgen_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
+ struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(hw);
+ const struct axi_clkgen_limits *limits = &axi_clkgen->limits;
unsigned int d, m, dout;
unsigned long long tmp;
- axi_clkgen_calc_params(*parent_rate, rate, &d, &m, &dout);
+ axi_clkgen_calc_params(limits, *parent_rate, rate, &d, &m, &dout);
if (d == 0 || dout == 0 || m == 0)
return -EINVAL;
@@ -485,6 +499,7 @@ static const struct clk_ops axi_clkgen_ops = {
static const struct of_device_id axi_clkgen_ids[] = {
{
.compatible = "adi,axi-clkgen-2.00.a",
+ .data = &axi_clkgen_zynq_default_limits,
},
{ },
};
@@ -492,7 +507,7 @@ MODULE_DEVICE_TABLE(of, axi_clkgen_ids);
static int axi_clkgen_probe(struct platform_device *pdev)
{
- const struct of_device_id *id;
+ const struct axi_clkgen_limits *dflt_limits;
struct axi_clkgen *axi_clkgen;
struct clk_init_data init;
const char *parent_names[2];
@@ -501,11 +516,8 @@ static int axi_clkgen_probe(struct platform_device *pdev)
unsigned int i;
int ret;
- if (!pdev->dev.of_node)
- return -ENODEV;
-
- id = of_match_node(axi_clkgen_ids, pdev->dev.of_node);
- if (!id)
+ dflt_limits = device_get_match_data(&pdev->dev);
+ if (!dflt_limits)
return -ENODEV;
axi_clkgen = devm_kzalloc(&pdev->dev, sizeof(*axi_clkgen), GFP_KERNEL);
@@ -527,6 +539,8 @@ static int axi_clkgen_probe(struct platform_device *pdev)
return -EINVAL;
}
+ memcpy(&axi_clkgen->limits, dflt_limits, sizeof(axi_clkgen->limits));
+
clk_name = pdev->dev.of_node->name;
of_property_read_string(pdev->dev.of_node, "clock-output-names",
&clk_name);
--
2.27.0
The change is mostly cosmetic. No functional changes.
Since the driver now uses of_device_get_match_data() to obtain some driver
specific info, there is no need to define the OF table before the probe
function.
Signed-off-by: Alexandru Ardelean <[email protected]>
---
drivers/clk/clk-axi-clkgen.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/clk/clk-axi-clkgen.c b/drivers/clk/clk-axi-clkgen.c
index 963a62e9c728..ad86e031ba3e 100644
--- a/drivers/clk/clk-axi-clkgen.c
+++ b/drivers/clk/clk-axi-clkgen.c
@@ -496,15 +496,6 @@ static const struct clk_ops axi_clkgen_ops = {
.get_parent = axi_clkgen_get_parent,
};
-static const struct of_device_id axi_clkgen_ids[] = {
- {
- .compatible = "adi,axi-clkgen-2.00.a",
- .data = &axi_clkgen_zynq_default_limits,
- },
- { },
-};
-MODULE_DEVICE_TABLE(of, axi_clkgen_ids);
-
static int axi_clkgen_probe(struct platform_device *pdev)
{
const struct axi_clkgen_limits *dflt_limits;
@@ -568,6 +559,15 @@ static int axi_clkgen_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id axi_clkgen_ids[] = {
+ {
+ .compatible = "adi,axi-clkgen-2.00.a",
+ .data = &axi_clkgen_zynq_default_limits,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, axi_clkgen_ids);
+
static struct platform_driver axi_clkgen_driver = {
.driver = {
.name = "adi-axi-clkgen",
--
2.27.0
Quoting Alexandru Ardelean (2020-12-02 23:40:36)
> Up until the these limits were global/hard-coded, since they are typically
> limits of the fabric.
>
> However, since this is an FPGA generated clock, this may run on setups
> where one clock is on a fabric, and another one synthesized on another
> fabric connected via PCIe (or some other inter-connect, and then these
> limits need to be adjusted for each instance of the AXI CLKGEN.
>
> This change wraps the current constants in 'axi_clkgen_limits' struct and
> the 'axi_clkgen' instance keeps a copy of these limits, which is
> initialized at probe from the default limits.
>
> The limits are stored on the device-tree OF table, so that we can adjust
> them via the compatible string.
>
> Signed-off-by: Alexandru Ardelean <[email protected]>
> ---
Applied to clk-next
Quoting Alexandru Ardelean (2020-12-02 23:40:37)
> The change is mostly cosmetic. No functional changes.
> Since the driver now uses of_device_get_match_data() to obtain some driver
> specific info, there is no need to define the OF table before the probe
> function.
>
> Signed-off-by: Alexandru Ardelean <[email protected]>
> ---
Applied to clk-next