Add check against LPC device v2 compatible string to
ensure that the fixed device tree layout is adopted.
The LPC register offsets are also fixed accordingly.
Signed-off-by: Chia-Wei, Wang <[email protected]>
---
drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
index 0cab4c2576e2..6e0e5b64e677 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
@@ -60,7 +60,7 @@
#define COND2 { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
/* LHCR0 is offset from the end of the H8S/2168-compatible registers */
-#define LHCR0 0x20
+#define LHCR0 0xa0
#define GFX064 0x64
#define B14 0
@@ -2648,14 +2648,21 @@ static struct regmap *aspeed_g5_acquire_regmap(struct aspeed_pinmux_data *ctx,
}
if (ip == ASPEED_IP_LPC) {
- struct device_node *node;
+ struct device_node *lhc_np;
+ struct device_node *lpc_np;
struct regmap *map;
- node = of_parse_phandle(ctx->dev->of_node,
+ lhc_np = of_parse_phandle(ctx->dev->of_node,
"aspeed,external-nodes", 1);
- if (node) {
- map = syscon_node_to_regmap(node->parent);
- of_node_put(node);
+ if (lhc_np) {
+ lpc_np = lhc_np->parent;
+ if (!of_device_is_compatible(lpc_np, "aspeed,ast2400-lpc-v2") &&
+ !of_device_is_compatible(lpc_np, "aspeed,ast2500-lpc-v2") &&
+ !of_device_is_compatible(lpc_np, "aspeed,ast2600-lpc-v2"))
+ return ERR_PTR(-ENODEV);
+
+ map = syscon_node_to_regmap(lpc_np);
+ of_node_put(lhc_np);
if (IS_ERR(map))
return map;
} else
--
2.17.1