This is the start of the stable review cycle for the 4.14.214 release.
There are 29 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sat, 09 Jan 2021 14:30:35 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.214-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.14.214-rc1
Zhang Xiaohui <[email protected]>
mwifiex: Fix possible buffer overflows in mwifiex_cmd_802_11_ad_hoc_start
Jonathan Cameron <[email protected]>
iio:magnetometer:mag3110: Fix alignment and data leak issues.
Jonathan Cameron <[email protected]>
iio:imu:bmi160: Fix alignment and data leak issues
Josh Poimboeuf <[email protected]>
kdev_t: always inline major/minor helper functions
Hyeongseok Kim <[email protected]>
dm verity: skip verity work if I/O error when system is shutting down
Takashi Iwai <[email protected]>
ALSA: pcm: Clear the full allocated memory at hw_params
Jessica Yu <[email protected]>
module: delay kobject uevent until after module init call
Qinglang Miao <[email protected]>
powerpc: sysdev: add missing iounmap() on error in mpic_msgr_probe()
Jan Kara <[email protected]>
quota: Don't overflow quota file offsets
Miroslav Benes <[email protected]>
module: set MODULE_STATE_GOING state when a module fails to load
Dinghao Liu <[email protected]>
rtc: sun6i: Fix memleak in sun6i_rtc_clk_init
Takashi Iwai <[email protected]>
ALSA: seq: Use bool for snd_seq_queue internal flags
Mauro Carvalho Chehab <[email protected]>
media: gp8psk: initialize stats at power control logic
Anant Thazhemadam <[email protected]>
misc: vmw_vmci: fix kernel info-leak by initializing dbells in vmci_ctx_get_chkpt_doorbells()
Rustam Kovhaev <[email protected]>
reiserfs: add check for an invalid ih_entry_count
Johan Hovold <[email protected]>
of: fix linker-section match-table corruption
Petr Vorel <[email protected]>
uapi: move constants from <linux/kernel.h> to <linux/const.h>
Christophe Leroy <[email protected]>
powerpc/bitops: Fix possible undefined behaviour with fls() and fls64()
Johan Hovold <[email protected]>
USB: serial: digi_acceleport: fix write-wakeup deadlocks
Stefan Haberland <[email protected]>
s390/dasd: fix hanging device offline processing
Eric Auger <[email protected]>
vfio/pci: Move dummy_resources_list init in vfio_pci_probe()
Johannes Weiner <[email protected]>
mm: memcontrol: fix excessive complexity in memory.stat reporting
Johannes Weiner <[email protected]>
mm: memcontrol: implement lruvec stat functions on top of each other
Johannes Weiner <[email protected]>
mm: memcontrol: eliminate raw access to stat and event counters
Johan Hovold <[email protected]>
ALSA: usb-audio: fix sync-ep altsetting sanity check
Alberto Aguirre <[email protected]>
ALSA: usb-audio: simplify set_sync_ep_implicit_fb_quirk
Takashi Iwai <[email protected]>
ALSA: hda/ca0132 - Fix work handling in delayed HP detection
Kevin Vigor <[email protected]>
md/raid10: initialize r10_bio->read_slot before use.
Jan Beulich <[email protected]>
x86/entry/64: Add instruction suffix
-------------
Diffstat:
Makefile | 4 +-
arch/powerpc/include/asm/bitops.h | 23 +++-
arch/powerpc/sysdev/mpic_msgr.c | 2 +-
arch/x86/entry/entry_64.S | 2 +-
drivers/iio/imu/bmi160/bmi160_core.c | 13 ++-
drivers/iio/magnetometer/mag3110.c | 13 ++-
drivers/md/dm-verity-target.c | 12 +-
drivers/md/raid10.c | 3 +-
drivers/media/usb/dvb-usb/gp8psk.c | 2 +-
drivers/misc/vmw_vmci/vmci_context.c | 2 +-
drivers/net/wireless/marvell/mwifiex/join.c | 2 +
drivers/rtc/rtc-sun6i.c | 8 +-
drivers/s390/block/dasd_alias.c | 10 +-
drivers/usb/serial/digi_acceleport.c | 45 +++-----
drivers/vfio/pci/vfio_pci.c | 3 +-
fs/quota/quota_tree.c | 8 +-
fs/reiserfs/stree.c | 6 +
include/linux/kdev_t.h | 22 ++--
include/linux/memcontrol.h | 165 +++++++++++++++++-----------
include/linux/of.h | 1 +
include/uapi/linux/const.h | 5 +
include/uapi/linux/ethtool.h | 2 +-
include/uapi/linux/kernel.h | 9 +-
include/uapi/linux/lightnvm.h | 2 +-
include/uapi/linux/mroute6.h | 2 +-
include/uapi/linux/netfilter/x_tables.h | 2 +-
include/uapi/linux/netlink.h | 2 +-
include/uapi/linux/sysctl.h | 2 +-
kernel/module.c | 6 +-
mm/memcontrol.c | 160 +++++++++++++--------------
sound/core/pcm_native.c | 9 +-
sound/core/seq/seq_queue.h | 8 +-
sound/pci/hda/patch_ca0132.c | 16 ++-
sound/usb/pcm.c | 52 ++++-----
34 files changed, 348 insertions(+), 275 deletions(-)
From: Jan Beulich <[email protected]>
commit a368d7fd2a3c6babb852fe974018dd97916bcd3b upstream.
Omitting suffixes from instructions in AT&T mode is bad practice when
operand size cannot be determined by the assembler from register
operands, and is likely going to be warned about by upstream gas in the
future (mine does already). Add the single missing suffix here.
Signed-off-by: Jan Beulich <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/entry/entry_64.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -55,7 +55,7 @@ END(native_usergs_sysret64)
.macro TRACE_IRQS_IRETQ
#ifdef CONFIG_TRACE_IRQFLAGS
- bt $9, EFLAGS(%rsp) /* interrupts off? */
+ btl $9, EFLAGS(%rsp) /* interrupts off? */
jnc 1f
TRACE_IRQS_ON
1:
From: Stefan Haberland <[email protected]>
[ Upstream commit 658a337a606f48b7ebe451591f7681d383fa115e ]
For an LCU update a read unit address configuration IO is required.
This is started using sleep_on(), which has early exit paths in case the
device is not usable for IO. For example when it is in offline processing.
In those cases the LCU update should fail and not be retried.
Therefore lcu_update_work checks if EOPNOTSUPP is returned or not.
Commit 41995342b40c ("s390/dasd: fix endless loop after read unit address configuration")
accidentally removed the EOPNOTSUPP return code from
read_unit_address_configuration(), which in turn might lead to an endless
loop of the LCU update in offline processing.
Fix by returning EOPNOTSUPP again if the device is not able to perform the
request.
Fixes: 41995342b40c ("s390/dasd: fix endless loop after read unit address configuration")
Cc: [email protected] #5.3
Signed-off-by: Stefan Haberland <[email protected]>
Reviewed-by: Jan Hoeppner <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/s390/block/dasd_alias.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c
index 487b16ace0060..0f70cae1c01e3 100644
--- a/drivers/s390/block/dasd_alias.c
+++ b/drivers/s390/block/dasd_alias.c
@@ -462,11 +462,19 @@ static int read_unit_address_configuration(struct dasd_device *device,
spin_unlock_irqrestore(&lcu->lock, flags);
rc = dasd_sleep_on(cqr);
- if (rc && !suborder_not_supported(cqr)) {
+ if (!rc)
+ goto out;
+
+ if (suborder_not_supported(cqr)) {
+ /* suborder not supported or device unusable for IO */
+ rc = -EOPNOTSUPP;
+ } else {
+ /* IO failed but should be retried */
spin_lock_irqsave(&lcu->lock, flags);
lcu->flags |= NEED_UAC_UPDATE;
spin_unlock_irqrestore(&lcu->lock, flags);
}
+out:
dasd_kfree_request(cqr, cqr->memdev);
return rc;
}
--
2.27.0
From: Dinghao Liu <[email protected]>
[ Upstream commit 28d211919e422f58c1e6c900e5810eee4f1ce4c8 ]
When clk_hw_register_fixed_rate_with_accuracy() fails,
clk_data should be freed. It's the same for the subsequent
two error paths, but we should also unregister the already
registered clocks in them.
Signed-off-by: Dinghao Liu <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/rtc/rtc-sun6i.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/rtc/rtc-sun6i.c b/drivers/rtc/rtc-sun6i.c
index 8eb2b6dd36fea..1d0d9c8d0085d 100644
--- a/drivers/rtc/rtc-sun6i.c
+++ b/drivers/rtc/rtc-sun6i.c
@@ -230,7 +230,7 @@ static void __init sun6i_rtc_clk_init(struct device_node *node)
300000000);
if (IS_ERR(rtc->int_osc)) {
pr_crit("Couldn't register the internal oscillator\n");
- return;
+ goto err;
}
parents[0] = clk_hw_get_name(rtc->int_osc);
@@ -246,7 +246,7 @@ static void __init sun6i_rtc_clk_init(struct device_node *node)
rtc->losc = clk_register(NULL, &rtc->hw);
if (IS_ERR(rtc->losc)) {
pr_crit("Couldn't register the LOSC clock\n");
- return;
+ goto err_register;
}
of_property_read_string_index(node, "clock-output-names", 1,
@@ -257,7 +257,7 @@ static void __init sun6i_rtc_clk_init(struct device_node *node)
&rtc->lock);
if (IS_ERR(rtc->ext_losc)) {
pr_crit("Couldn't register the LOSC external gate\n");
- return;
+ goto err_register;
}
clk_data->num = 2;
@@ -266,6 +266,8 @@ static void __init sun6i_rtc_clk_init(struct device_node *node)
of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
return;
+err_register:
+ clk_hw_unregister_fixed_rate(rtc->int_osc);
err:
kfree(clk_data);
}
--
2.27.0
From: Christophe Leroy <[email protected]>
[ Upstream commit 1891ef21d92c4801ea082ee8ed478e304ddc6749 ]
fls() and fls64() are using __builtin_ctz() and _builtin_ctzll().
On powerpc, those builtins trivially use ctlzw and ctlzd power
instructions.
Allthough those instructions provide the expected result with
input argument 0, __builtin_ctz() and __builtin_ctzll() are
documented as undefined for value 0.
The easiest fix would be to use fls() and fls64() functions
defined in include/asm-generic/bitops/builtin-fls.h and
include/asm-generic/bitops/fls64.h, but GCC output is not optimal:
00000388 <testfls>:
388: 2c 03 00 00 cmpwi r3,0
38c: 41 82 00 10 beq 39c <testfls+0x14>
390: 7c 63 00 34 cntlzw r3,r3
394: 20 63 00 20 subfic r3,r3,32
398: 4e 80 00 20 blr
39c: 38 60 00 00 li r3,0
3a0: 4e 80 00 20 blr
000003b0 <testfls64>:
3b0: 2c 03 00 00 cmpwi r3,0
3b4: 40 82 00 1c bne 3d0 <testfls64+0x20>
3b8: 2f 84 00 00 cmpwi cr7,r4,0
3bc: 38 60 00 00 li r3,0
3c0: 4d 9e 00 20 beqlr cr7
3c4: 7c 83 00 34 cntlzw r3,r4
3c8: 20 63 00 20 subfic r3,r3,32
3cc: 4e 80 00 20 blr
3d0: 7c 63 00 34 cntlzw r3,r3
3d4: 20 63 00 40 subfic r3,r3,64
3d8: 4e 80 00 20 blr
When the input of fls(x) is a constant, just check x for nullity and
return either 0 or __builtin_clz(x). Otherwise, use cntlzw instruction
directly.
For fls64() on PPC64, do the same but with __builtin_clzll() and
cntlzd instruction. On PPC32, lets take the generic fls64() which
will use our fls(). The result is as expected:
00000388 <testfls>:
388: 7c 63 00 34 cntlzw r3,r3
38c: 20 63 00 20 subfic r3,r3,32
390: 4e 80 00 20 blr
000003a0 <testfls64>:
3a0: 2c 03 00 00 cmpwi r3,0
3a4: 40 82 00 10 bne 3b4 <testfls64+0x14>
3a8: 7c 83 00 34 cntlzw r3,r4
3ac: 20 63 00 20 subfic r3,r3,32
3b0: 4e 80 00 20 blr
3b4: 7c 63 00 34 cntlzw r3,r3
3b8: 20 63 00 40 subfic r3,r3,64
3bc: 4e 80 00 20 blr
Fixes: 2fcff790dcb4 ("powerpc: Use builtin functions for fls()/__fls()/fls64()")
Cc: [email protected]
Signed-off-by: Christophe Leroy <[email protected]>
Acked-by: Segher Boessenkool <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/348c2d3f19ffcff8abe50d52513f989c4581d000.1603375524.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/bitops.h | 23 +++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h
index b750ffef83c7d..0ec93d940d12c 100644
--- a/arch/powerpc/include/asm/bitops.h
+++ b/arch/powerpc/include/asm/bitops.h
@@ -220,15 +220,34 @@ static __inline__ void __clear_bit_unlock(int nr, volatile unsigned long *addr)
*/
static __inline__ int fls(unsigned int x)
{
- return 32 - __builtin_clz(x);
+ int lz;
+
+ if (__builtin_constant_p(x))
+ return x ? 32 - __builtin_clz(x) : 0;
+ asm("cntlzw %0,%1" : "=r" (lz) : "r" (x));
+ return 32 - lz;
}
#include <asm-generic/bitops/builtin-__fls.h>
+/*
+ * 64-bit can do this using one cntlzd (count leading zeroes doubleword)
+ * instruction; for 32-bit we use the generic version, which does two
+ * 32-bit fls calls.
+ */
+#ifdef CONFIG_PPC64
static __inline__ int fls64(__u64 x)
{
- return 64 - __builtin_clzll(x);
+ int lz;
+
+ if (__builtin_constant_p(x))
+ return x ? 64 - __builtin_clzll(x) : 0;
+ asm("cntlzd %0,%1" : "=r" (lz) : "r" (x));
+ return 64 - lz;
}
+#else
+#include <asm-generic/bitops/fls64.h>
+#endif
#ifdef CONFIG_PPC64
unsigned int __arch_hweight8(unsigned int w);
--
2.27.0
From: Qinglang Miao <[email protected]>
[ Upstream commit ffa1797040c5da391859a9556be7b735acbe1242 ]
I noticed that iounmap() of msgr_block_addr before return from
mpic_msgr_probe() in the error handling case is missing. So use
devm_ioremap() instead of just ioremap() when remapping the message
register block, so the mapping will be automatically released on
probe failure.
Signed-off-by: Qinglang Miao <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/sysdev/mpic_msgr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c
index 280e964e1aa88..497e86cfb12e0 100644
--- a/arch/powerpc/sysdev/mpic_msgr.c
+++ b/arch/powerpc/sysdev/mpic_msgr.c
@@ -196,7 +196,7 @@ static int mpic_msgr_probe(struct platform_device *dev)
/* IO map the message register block. */
of_address_to_resource(np, 0, &rsrc);
- msgr_block_addr = ioremap(rsrc.start, resource_size(&rsrc));
+ msgr_block_addr = devm_ioremap(&dev->dev, rsrc.start, resource_size(&rsrc));
if (!msgr_block_addr) {
dev_err(&dev->dev, "Failed to iomap MPIC message registers");
return -EFAULT;
--
2.27.0
From: Johan Hovold <[email protected]>
[ Upstream commit 5098e77962e7c8947f87bd8c5869c83e000a522a ]
The driver must not call tty_wakeup() while holding its private lock as
line disciplines are allowed to call back into write() from
write_wakeup(), leading to a deadlock.
Also remove the unneeded work struct that was used to defer wakeup in
order to work around a possible race in ancient times (see comment about
n_tty write_chan() in commit 14b54e39b412 ("USB: serial: remove
changelogs and old todo entries")).
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: [email protected]
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/serial/digi_acceleport.c | 45 ++++++++--------------------
1 file changed, 13 insertions(+), 32 deletions(-)
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 2ce39af32cfa6..e494ffdc06bc9 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -23,7 +23,6 @@
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
-#include <linux/workqueue.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/wait.h>
@@ -202,14 +201,12 @@ struct digi_port {
int dp_throttle_restart;
wait_queue_head_t dp_flush_wait;
wait_queue_head_t dp_close_wait; /* wait queue for close */
- struct work_struct dp_wakeup_work;
struct usb_serial_port *dp_port;
};
/* Local Function Declarations */
-static void digi_wakeup_write_lock(struct work_struct *work);
static int digi_write_oob_command(struct usb_serial_port *port,
unsigned char *buf, int count, int interruptible);
static int digi_write_inb_command(struct usb_serial_port *port,
@@ -360,26 +357,6 @@ __releases(lock)
return timeout;
}
-
-/*
- * Digi Wakeup Write
- *
- * Wake up port, line discipline, and tty processes sleeping
- * on writes.
- */
-
-static void digi_wakeup_write_lock(struct work_struct *work)
-{
- struct digi_port *priv =
- container_of(work, struct digi_port, dp_wakeup_work);
- struct usb_serial_port *port = priv->dp_port;
- unsigned long flags;
-
- spin_lock_irqsave(&priv->dp_port_lock, flags);
- tty_port_tty_wakeup(&port->port);
- spin_unlock_irqrestore(&priv->dp_port_lock, flags);
-}
-
/*
* Digi Write OOB Command
*
@@ -990,6 +967,7 @@ static void digi_write_bulk_callback(struct urb *urb)
struct digi_serial *serial_priv;
int ret = 0;
int status = urb->status;
+ bool wakeup;
/* port and serial sanity check */
if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
@@ -1016,6 +994,7 @@ static void digi_write_bulk_callback(struct urb *urb)
}
/* try to send any buffered data on this port */
+ wakeup = true;
spin_lock(&priv->dp_port_lock);
priv->dp_write_urb_in_use = 0;
if (priv->dp_out_buf_len > 0) {
@@ -1031,19 +1010,18 @@ static void digi_write_bulk_callback(struct urb *urb)
if (ret == 0) {
priv->dp_write_urb_in_use = 1;
priv->dp_out_buf_len = 0;
+ wakeup = false;
}
}
- /* wake up processes sleeping on writes immediately */
- tty_port_tty_wakeup(&port->port);
- /* also queue up a wakeup at scheduler time, in case we */
- /* lost the race in write_chan(). */
- schedule_work(&priv->dp_wakeup_work);
-
spin_unlock(&priv->dp_port_lock);
+
if (ret && ret != -EPERM)
dev_err_console(port,
"%s: usb_submit_urb failed, ret=%d, port=%d\n",
__func__, ret, priv->dp_port_num);
+
+ if (wakeup)
+ tty_port_tty_wakeup(&port->port);
}
static int digi_write_room(struct tty_struct *tty)
@@ -1243,7 +1221,6 @@ static int digi_port_init(struct usb_serial_port *port, unsigned port_num)
init_waitqueue_head(&priv->dp_transmit_idle_wait);
init_waitqueue_head(&priv->dp_flush_wait);
init_waitqueue_head(&priv->dp_close_wait);
- INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
priv->dp_port = port;
init_waitqueue_head(&port->write_wait);
@@ -1510,13 +1487,14 @@ static int digi_read_oob_callback(struct urb *urb)
rts = C_CRTSCTS(tty);
if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
+ bool wakeup = false;
+
spin_lock(&priv->dp_port_lock);
/* convert from digi flags to termiox flags */
if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
priv->dp_modem_signals |= TIOCM_CTS;
- /* port must be open to use tty struct */
if (rts)
- tty_port_tty_wakeup(&port->port);
+ wakeup = true;
} else {
priv->dp_modem_signals &= ~TIOCM_CTS;
/* port must be open to use tty struct */
@@ -1535,6 +1513,9 @@ static int digi_read_oob_callback(struct urb *urb)
priv->dp_modem_signals &= ~TIOCM_CD;
spin_unlock(&priv->dp_port_lock);
+
+ if (wakeup)
+ tty_port_tty_wakeup(&port->port);
} else if (opcode == DIGI_CMD_TRANSMIT_IDLE) {
spin_lock(&priv->dp_port_lock);
priv->dp_transmit_idle = 1;
--
2.27.0
From: Johannes Weiner <[email protected]>
commit c9019e9bf42e66d028d70d2da6206cad4dd9250d upstream
Replace all raw 'this_cpu_' modifications of the stat and event per-cpu
counters with API functions such as mod_memcg_state().
This makes the code easier to read, but is also in preparation for the
next patch, which changes the per-cpu implementation of those counters.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Johannes Weiner <[email protected]>
Acked-by: Vladimir Davydov <[email protected]>
Cc: Michal Hocko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Cc: <[email protected]>
Signed-off-by: Shaoying Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/memcontrol.h | 31 +++++++++++++++--------
mm/memcontrol.c | 59 +++++++++++++++++++--------------------------
2 files changed, 45 insertions(+), 45 deletions(-)
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -272,13 +272,6 @@ static inline bool mem_cgroup_disabled(v
return !cgroup_subsys_enabled(memory_cgrp_subsys);
}
-static inline void mem_cgroup_event(struct mem_cgroup *memcg,
- enum memcg_event_item event)
-{
- this_cpu_inc(memcg->stat->events[event]);
- cgroup_file_notify(&memcg->events_file);
-}
-
bool mem_cgroup_low(struct mem_cgroup *root, struct mem_cgroup *memcg);
int mem_cgroup_try_charge(struct page *page, struct mm_struct *mm,
@@ -627,15 +620,23 @@ unsigned long mem_cgroup_soft_limit_recl
gfp_t gfp_mask,
unsigned long *total_scanned);
+/* idx can be of type enum memcg_event_item or vm_event_item */
+static inline void __count_memcg_events(struct mem_cgroup *memcg,
+ int idx, unsigned long count)
+{
+ if (!mem_cgroup_disabled())
+ __this_cpu_add(memcg->stat->events[idx], count);
+}
+
+/* idx can be of type enum memcg_event_item or vm_event_item */
static inline void count_memcg_events(struct mem_cgroup *memcg,
- enum vm_event_item idx,
- unsigned long count)
+ int idx, unsigned long count)
{
if (!mem_cgroup_disabled())
this_cpu_add(memcg->stat->events[idx], count);
}
-/* idx can be of type enum memcg_stat_item or node_stat_item */
+/* idx can be of type enum memcg_event_item or vm_event_item */
static inline void count_memcg_page_event(struct page *page,
int idx)
{
@@ -654,12 +655,20 @@ static inline void count_memcg_event_mm(
rcu_read_lock();
memcg = mem_cgroup_from_task(rcu_dereference(mm->owner));
if (likely(memcg)) {
- this_cpu_inc(memcg->stat->events[idx]);
+ count_memcg_events(memcg, idx, 1);
if (idx == OOM_KILL)
cgroup_file_notify(&memcg->events_file);
}
rcu_read_unlock();
}
+
+static inline void mem_cgroup_event(struct mem_cgroup *memcg,
+ enum memcg_event_item event)
+{
+ count_memcg_events(memcg, event, 1);
+ cgroup_file_notify(&memcg->events_file);
+}
+
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
void mem_cgroup_split_huge_fixup(struct page *head);
#endif
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -586,23 +586,23 @@ static void mem_cgroup_charge_statistics
* counted as CACHE even if it's on ANON LRU.
*/
if (PageAnon(page))
- __this_cpu_add(memcg->stat->count[MEMCG_RSS], nr_pages);
+ __mod_memcg_state(memcg, MEMCG_RSS, nr_pages);
else {
- __this_cpu_add(memcg->stat->count[MEMCG_CACHE], nr_pages);
+ __mod_memcg_state(memcg, MEMCG_CACHE, nr_pages);
if (PageSwapBacked(page))
- __this_cpu_add(memcg->stat->count[NR_SHMEM], nr_pages);
+ __mod_memcg_state(memcg, NR_SHMEM, nr_pages);
}
if (compound) {
VM_BUG_ON_PAGE(!PageTransHuge(page), page);
- __this_cpu_add(memcg->stat->count[MEMCG_RSS_HUGE], nr_pages);
+ __mod_memcg_state(memcg, MEMCG_RSS_HUGE, nr_pages);
}
/* pagein of a big page is an event. So, ignore page size */
if (nr_pages > 0)
- __this_cpu_inc(memcg->stat->events[PGPGIN]);
+ __count_memcg_events(memcg, PGPGIN, 1);
else {
- __this_cpu_inc(memcg->stat->events[PGPGOUT]);
+ __count_memcg_events(memcg, PGPGOUT, 1);
nr_pages = -nr_pages; /* for event */
}
@@ -2444,18 +2444,11 @@ void mem_cgroup_split_huge_fixup(struct
for (i = 1; i < HPAGE_PMD_NR; i++)
head[i].mem_cgroup = head->mem_cgroup;
- __this_cpu_sub(head->mem_cgroup->stat->count[MEMCG_RSS_HUGE],
- HPAGE_PMD_NR);
+ __mod_memcg_state(head->mem_cgroup, MEMCG_RSS_HUGE, -HPAGE_PMD_NR);
}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#ifdef CONFIG_MEMCG_SWAP
-static void mem_cgroup_swap_statistics(struct mem_cgroup *memcg,
- int nr_entries)
-{
- this_cpu_add(memcg->stat->count[MEMCG_SWAP], nr_entries);
-}
-
/**
* mem_cgroup_move_swap_account - move swap charge and swap_cgroup's record.
* @entry: swap entry to be moved
@@ -2479,8 +2472,8 @@ static int mem_cgroup_move_swap_account(
new_id = mem_cgroup_id(to);
if (swap_cgroup_cmpxchg(entry, old_id, new_id) == old_id) {
- mem_cgroup_swap_statistics(from, -1);
- mem_cgroup_swap_statistics(to, 1);
+ mod_memcg_state(from, MEMCG_SWAP, -1);
+ mod_memcg_state(to, MEMCG_SWAP, 1);
return 0;
}
return -EINVAL;
@@ -4632,8 +4625,8 @@ static int mem_cgroup_move_account(struc
spin_lock_irqsave(&from->move_lock, flags);
if (!anon && page_mapped(page)) {
- __this_cpu_sub(from->stat->count[NR_FILE_MAPPED], nr_pages);
- __this_cpu_add(to->stat->count[NR_FILE_MAPPED], nr_pages);
+ __mod_memcg_state(from, NR_FILE_MAPPED, -nr_pages);
+ __mod_memcg_state(to, NR_FILE_MAPPED, nr_pages);
}
/*
@@ -4645,16 +4638,14 @@ static int mem_cgroup_move_account(struc
struct address_space *mapping = page_mapping(page);
if (mapping_cap_account_dirty(mapping)) {
- __this_cpu_sub(from->stat->count[NR_FILE_DIRTY],
- nr_pages);
- __this_cpu_add(to->stat->count[NR_FILE_DIRTY],
- nr_pages);
+ __mod_memcg_state(from, NR_FILE_DIRTY, -nr_pages);
+ __mod_memcg_state(to, NR_FILE_DIRTY, nr_pages);
}
}
if (PageWriteback(page)) {
- __this_cpu_sub(from->stat->count[NR_WRITEBACK], nr_pages);
- __this_cpu_add(to->stat->count[NR_WRITEBACK], nr_pages);
+ __mod_memcg_state(from, NR_WRITEBACK, -nr_pages);
+ __mod_memcg_state(to, NR_WRITEBACK, nr_pages);
}
/*
@@ -5690,11 +5681,11 @@ static void uncharge_batch(const struct
}
local_irq_save(flags);
- __this_cpu_sub(ug->memcg->stat->count[MEMCG_RSS], ug->nr_anon);
- __this_cpu_sub(ug->memcg->stat->count[MEMCG_CACHE], ug->nr_file);
- __this_cpu_sub(ug->memcg->stat->count[MEMCG_RSS_HUGE], ug->nr_huge);
- __this_cpu_sub(ug->memcg->stat->count[NR_SHMEM], ug->nr_shmem);
- __this_cpu_add(ug->memcg->stat->events[PGPGOUT], ug->pgpgout);
+ __mod_memcg_state(ug->memcg, MEMCG_RSS, -ug->nr_anon);
+ __mod_memcg_state(ug->memcg, MEMCG_CACHE, -ug->nr_file);
+ __mod_memcg_state(ug->memcg, MEMCG_RSS_HUGE, -ug->nr_huge);
+ __mod_memcg_state(ug->memcg, NR_SHMEM, -ug->nr_shmem);
+ __count_memcg_events(ug->memcg, PGPGOUT, ug->pgpgout);
__this_cpu_add(ug->memcg->stat->nr_page_events, nr_pages);
memcg_check_events(ug->memcg, ug->dummy_page);
local_irq_restore(flags);
@@ -5926,7 +5917,7 @@ bool mem_cgroup_charge_skmem(struct mem_
if (in_softirq())
gfp_mask = GFP_NOWAIT;
- this_cpu_add(memcg->stat->count[MEMCG_SOCK], nr_pages);
+ mod_memcg_state(memcg, MEMCG_SOCK, nr_pages);
if (try_charge(memcg, gfp_mask, nr_pages) == 0)
return true;
@@ -5947,7 +5938,7 @@ void mem_cgroup_uncharge_skmem(struct me
return;
}
- this_cpu_sub(memcg->stat->count[MEMCG_SOCK], nr_pages);
+ mod_memcg_state(memcg, MEMCG_SOCK, -nr_pages);
refill_stock(memcg, nr_pages);
}
@@ -6071,7 +6062,7 @@ void mem_cgroup_swapout(struct page *pag
oldid = swap_cgroup_record(entry, mem_cgroup_id(swap_memcg),
nr_entries);
VM_BUG_ON_PAGE(oldid, page);
- mem_cgroup_swap_statistics(swap_memcg, nr_entries);
+ mod_memcg_state(swap_memcg, MEMCG_SWAP, nr_entries);
page->mem_cgroup = NULL;
@@ -6137,7 +6128,7 @@ int mem_cgroup_try_charge_swap(struct pa
mem_cgroup_id_get_many(memcg, nr_pages - 1);
oldid = swap_cgroup_record(entry, mem_cgroup_id(memcg), nr_pages);
VM_BUG_ON_PAGE(oldid, page);
- mem_cgroup_swap_statistics(memcg, nr_pages);
+ mod_memcg_state(memcg, MEMCG_SWAP, nr_pages);
return 0;
}
@@ -6165,7 +6156,7 @@ void mem_cgroup_uncharge_swap(swp_entry_
else
page_counter_uncharge(&memcg->memsw, nr_pages);
}
- mem_cgroup_swap_statistics(memcg, -nr_pages);
+ mod_memcg_state(memcg, MEMCG_SWAP, -nr_pages);
mem_cgroup_id_put_many(memcg, nr_pages);
}
rcu_read_unlock();
From: Miroslav Benes <[email protected]>
[ Upstream commit 5e8ed280dab9eeabc1ba0b2db5dbe9fe6debb6b5 ]
If a module fails to load due to an error in prepare_coming_module(),
the following error handling in load_module() runs with
MODULE_STATE_COMING in module's state. Fix it by correctly setting
MODULE_STATE_GOING under "bug_cleanup" label.
Signed-off-by: Miroslav Benes <[email protected]>
Signed-off-by: Jessica Yu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/module.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/module.c b/kernel/module.c
index 2806c9b6577c1..c4f0a8fe144e1 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -3801,6 +3801,7 @@ static int load_module(struct load_info *info, const char __user *uargs,
MODULE_STATE_GOING, mod);
klp_module_going(mod);
bug_cleanup:
+ mod->state = MODULE_STATE_GOING;
/* module_bug_cleanup needs module_mutex protection */
mutex_lock(&module_mutex);
module_bug_cleanup(mod);
--
2.27.0
From: Anant Thazhemadam <[email protected]>
commit 31dcb6c30a26d32650ce134820f27de3c675a45a upstream.
A kernel-infoleak was reported by syzbot, which was caused because
dbells was left uninitialized.
Using kzalloc() instead of kmalloc() fixes this issue.
Reported-by: [email protected]
Tested-by: [email protected]
Signed-off-by: Anant Thazhemadam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/vmw_vmci/vmci_context.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/misc/vmw_vmci/vmci_context.c
+++ b/drivers/misc/vmw_vmci/vmci_context.c
@@ -751,7 +751,7 @@ static int vmci_ctx_get_chkpt_doorbells(
return VMCI_ERROR_MORE_DATA;
}
- dbells = kmalloc(data_size, GFP_ATOMIC);
+ dbells = kzalloc(data_size, GFP_ATOMIC);
if (!dbells)
return VMCI_ERROR_NO_MEM;
From: Johan Hovold <[email protected]>
commit 5812b32e01c6d86ba7a84110702b46d8a8531fe9 upstream.
Specify type alignment when declaring linker-section match-table entries
to prevent gcc from increasing alignment and corrupting the various
tables with padding (e.g. timers, irqchips, clocks, reserved memory).
This is specifically needed on x86 where gcc (typically) aligns larger
objects like struct of_device_id with static extent on 32-byte
boundaries which at best prevents matching on anything but the first
entry. Specifying alignment when declaring variables suppresses this
optimisation.
Here's a 64-bit example where all entries are corrupt as 16 bytes of
padding has been inserted before the first entry:
ffffffff8266b4b0 D __clk_of_table
ffffffff8266b4c0 d __of_table_fixed_factor_clk
ffffffff8266b5a0 d __of_table_fixed_clk
ffffffff8266b680 d __clk_of_table_sentinel
And here's a 32-bit example where the 8-byte-aligned table happens to be
placed on a 32-byte boundary so that all but the first entry are corrupt
due to the 28 bytes of padding inserted between entries:
812b3ec0 D __irqchip_of_table
812b3ec0 d __of_table_irqchip1
812b3fa0 d __of_table_irqchip2
812b4080 d __of_table_irqchip3
812b4160 d irqchip_of_match_end
Verified on x86 using gcc-9.3 and gcc-4.9 (which uses 64-byte
alignment), and on arm using gcc-7.2.
Note that there are no in-tree users of these tables on x86 currently
(even if they are included in the image).
Fixes: 54196ccbe0ba ("of: consolidate linker section OF match table declarations")
Fixes: f6e916b82022 ("irqchip: add basic infrastructure")
Cc: stable <[email protected]> # 3.9
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ johan: adjust context to 5.4 ]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/of.h | 1 +
1 file changed, 1 insertion(+)
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -1163,6 +1163,7 @@ static inline int of_get_available_child
#define _OF_DECLARE(table, name, compat, fn, fn_type) \
static const struct of_device_id __of_table_##name \
__used __section(__##table##_of_table) \
+ __aligned(__alignof__(struct of_device_id)) \
= { .compatible = compat, \
.data = (fn == (fn_type)NULL) ? fn : fn }
#else
From: Rustam Kovhaev <[email protected]>
commit d24396c5290ba8ab04ba505176874c4e04a2d53c upstream.
when directory item has an invalid value set for ih_entry_count it might
trigger use-after-free or out-of-bounds read in bin_search_in_dir_item()
ih_entry_count * IH_SIZE for directory item should not be larger than
ih_item_len
Link: https://lore.kernel.org/r/[email protected]
Reported-and-tested-by: [email protected]
Link: https://syzkaller.appspot.com/bug?extid=83b6f7cf9922cae5c4d7
Signed-off-by: Rustam Kovhaev <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/reiserfs/stree.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/fs/reiserfs/stree.c
+++ b/fs/reiserfs/stree.c
@@ -454,6 +454,12 @@ static int is_leaf(char *buf, int blocks
"(second one): %h", ih);
return 0;
}
+ if (is_direntry_le_ih(ih) && (ih_item_len(ih) < (ih_entry_count(ih) * IH_SIZE))) {
+ reiserfs_warning(NULL, "reiserfs-5093",
+ "item entry count seems wrong %h",
+ ih);
+ return 0;
+ }
prev_location = ih_location(ih);
}
From: Kevin Vigor <[email protected]>
commit 93decc563637c4288380912eac0eb42fb246cc04 upstream.
In __make_request() a new r10bio is allocated and passed to
raid10_read_request(). The read_slot member of the bio is not
initialized, and the raid10_read_request() uses it to index an
array. This leads to occasional panics.
Fix by initializing the field to invalid value and checking for
valid value in raid10_read_request().
Cc: [email protected]
Signed-off-by: Kevin Vigor <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/raid10.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1120,7 +1120,7 @@ static void raid10_read_request(struct m
struct md_rdev *err_rdev = NULL;
gfp_t gfp = GFP_NOIO;
- if (r10_bio->devs[slot].rdev) {
+ if (slot >= 0 && r10_bio->devs[slot].rdev) {
/*
* This is an error retry, but we cannot
* safely dereference the rdev in the r10_bio,
@@ -1513,6 +1513,7 @@ static void __make_request(struct mddev
r10_bio->mddev = mddev;
r10_bio->sector = bio->bi_iter.bi_sector;
r10_bio->state = 0;
+ r10_bio->read_slot = -1;
memset(r10_bio->devs, 0, sizeof(r10_bio->devs[0]) * conf->copies);
if (bio_data_dir(bio) == READ)
From: Johannes Weiner <[email protected]>
commit a983b5ebee57209c99f68c8327072f25e0e6e3da upstream
We've seen memory.stat reads in top-level cgroups take up to fourteen
seconds during a userspace bug that created tens of thousands of ghost
cgroups pinned by lingering page cache.
Even with a more reasonable number of cgroups, aggregating memory.stat
is unnecessarily heavy. The complexity is this:
nr_cgroups * nr_stat_items * nr_possible_cpus
where the stat items are ~70 at this point. With 128 cgroups and 128
CPUs - decent, not enormous setups - reading the top-level memory.stat
has to aggregate over a million per-cpu counters. This doesn't scale.
Instead of spreading the source of truth across all CPUs, use the
per-cpu counters merely to batch updates to shared atomic counters.
This is the same as the per-cpu stocks we use for charging memory to the
shared atomic page_counters, and also the way the global vmstat counters
are implemented.
Vmstat has elaborate spilling thresholds that depend on the number of
CPUs, amount of memory, and memory pressure - carefully balancing the
cost of counter updates with the amount of per-cpu error. That's
because the vmstat counters are system-wide, but also used for decisions
inside the kernel (e.g. NR_FREE_PAGES in the allocator). Neither is
true for the memory controller.
Use the same static batch size we already use for page_counter updates
during charging. The per-cpu error in the stats will be 128k, which is
an acceptable ratio of cores to memory accounting granularity.
[[email protected]: fix warning in __this_cpu_xchg() calls]
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Johannes Weiner <[email protected]>
Acked-by: Vladimir Davydov <[email protected]>
Cc: Michal Hocko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Cc: [email protected]
[[email protected]: resolved the conflict brought by commit 17ffa29c355658c8e9b19f56cbf0388500ca7905 in mm/memcontrol.c by contextual fix]
Signed-off-by: Shaoying Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/memcontrol.h | 96 +++++++++++++++++++++++++++---------------
mm/memcontrol.c | 101 ++++++++++++++++++++++-----------------------
2 files changed, 113 insertions(+), 84 deletions(-)
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -108,7 +108,10 @@ struct lruvec_stat {
*/
struct mem_cgroup_per_node {
struct lruvec lruvec;
- struct lruvec_stat __percpu *lruvec_stat;
+
+ struct lruvec_stat __percpu *lruvec_stat_cpu;
+ atomic_long_t lruvec_stat[NR_VM_NODE_STAT_ITEMS];
+
unsigned long lru_zone_size[MAX_NR_ZONES][NR_LRU_LISTS];
struct mem_cgroup_reclaim_iter iter[DEF_PRIORITY + 1];
@@ -227,10 +230,10 @@ struct mem_cgroup {
spinlock_t move_lock;
struct task_struct *move_lock_task;
unsigned long move_lock_flags;
- /*
- * percpu counter.
- */
- struct mem_cgroup_stat_cpu __percpu *stat;
+
+ struct mem_cgroup_stat_cpu __percpu *stat_cpu;
+ atomic_long_t stat[MEMCG_NR_STAT];
+ atomic_long_t events[MEMCG_NR_EVENTS];
unsigned long socket_pressure;
@@ -265,6 +268,12 @@ struct mem_cgroup {
/* WARNING: nodeinfo must be the last member here */
};
+/*
+ * size of first charge trial. "32" comes from vmscan.c's magic value.
+ * TODO: maybe necessary to use big numbers in big irons.
+ */
+#define MEMCG_CHARGE_BATCH 32U
+
extern struct mem_cgroup *root_mem_cgroup;
static inline bool mem_cgroup_disabled(void)
@@ -485,32 +494,38 @@ void unlock_page_memcg(struct page *page
static inline unsigned long memcg_page_state(struct mem_cgroup *memcg,
int idx)
{
- long val = 0;
- int cpu;
-
- for_each_possible_cpu(cpu)
- val += per_cpu(memcg->stat->count[idx], cpu);
-
- if (val < 0)
- val = 0;
-
- return val;
+ long x = atomic_long_read(&memcg->stat[idx]);
+#ifdef CONFIG_SMP
+ if (x < 0)
+ x = 0;
+#endif
+ return x;
}
/* idx can be of type enum memcg_stat_item or node_stat_item */
static inline void __mod_memcg_state(struct mem_cgroup *memcg,
int idx, int val)
{
- if (!mem_cgroup_disabled())
- __this_cpu_add(memcg->stat->count[idx], val);
+ long x;
+
+ if (mem_cgroup_disabled())
+ return;
+
+ x = val + __this_cpu_read(memcg->stat_cpu->count[idx]);
+ if (unlikely(abs(x) > MEMCG_CHARGE_BATCH)) {
+ atomic_long_add(x, &memcg->stat[idx]);
+ x = 0;
+ }
+ __this_cpu_write(memcg->stat_cpu->count[idx], x);
}
/* idx can be of type enum memcg_stat_item or node_stat_item */
static inline void mod_memcg_state(struct mem_cgroup *memcg,
int idx, int val)
{
- if (!mem_cgroup_disabled())
- this_cpu_add(memcg->stat->count[idx], val);
+ preempt_disable();
+ __mod_memcg_state(memcg, idx, val);
+ preempt_enable();
}
/**
@@ -548,26 +563,25 @@ static inline unsigned long lruvec_page_
enum node_stat_item idx)
{
struct mem_cgroup_per_node *pn;
- long val = 0;
- int cpu;
+ long x;
if (mem_cgroup_disabled())
return node_page_state(lruvec_pgdat(lruvec), idx);
pn = container_of(lruvec, struct mem_cgroup_per_node, lruvec);
- for_each_possible_cpu(cpu)
- val += per_cpu(pn->lruvec_stat->count[idx], cpu);
-
- if (val < 0)
- val = 0;
-
- return val;
+ x = atomic_long_read(&pn->lruvec_stat[idx]);
+#ifdef CONFIG_SMP
+ if (x < 0)
+ x = 0;
+#endif
+ return x;
}
static inline void __mod_lruvec_state(struct lruvec *lruvec,
enum node_stat_item idx, int val)
{
struct mem_cgroup_per_node *pn;
+ long x;
/* Update node */
__mod_node_page_state(lruvec_pgdat(lruvec), idx, val);
@@ -581,7 +595,12 @@ static inline void __mod_lruvec_state(st
__mod_memcg_state(pn->memcg, idx, val);
/* Update lruvec */
- __this_cpu_add(pn->lruvec_stat->count[idx], val);
+ x = val + __this_cpu_read(pn->lruvec_stat_cpu->count[idx]);
+ if (unlikely(abs(x) > MEMCG_CHARGE_BATCH)) {
+ atomic_long_add(x, &pn->lruvec_stat[idx]);
+ x = 0;
+ }
+ __this_cpu_write(pn->lruvec_stat_cpu->count[idx], x);
}
static inline void mod_lruvec_state(struct lruvec *lruvec,
@@ -624,16 +643,25 @@ unsigned long mem_cgroup_soft_limit_recl
static inline void __count_memcg_events(struct mem_cgroup *memcg,
int idx, unsigned long count)
{
- if (!mem_cgroup_disabled())
- __this_cpu_add(memcg->stat->events[idx], count);
+ unsigned long x;
+
+ if (mem_cgroup_disabled())
+ return;
+
+ x = count + __this_cpu_read(memcg->stat_cpu->events[idx]);
+ if (unlikely(x > MEMCG_CHARGE_BATCH)) {
+ atomic_long_add(x, &memcg->events[idx]);
+ x = 0;
+ }
+ __this_cpu_write(memcg->stat_cpu->events[idx], x);
}
-/* idx can be of type enum memcg_event_item or vm_event_item */
static inline void count_memcg_events(struct mem_cgroup *memcg,
int idx, unsigned long count)
{
- if (!mem_cgroup_disabled())
- this_cpu_add(memcg->stat->events[idx], count);
+ preempt_disable();
+ __count_memcg_events(memcg, idx, count);
+ preempt_enable();
}
/* idx can be of type enum memcg_event_item or vm_event_item */
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -542,39 +542,10 @@ mem_cgroup_largest_soft_limit_node(struc
return mz;
}
-/*
- * Return page count for single (non recursive) @memcg.
- *
- * Implementation Note: reading percpu statistics for memcg.
- *
- * Both of vmstat[] and percpu_counter has threshold and do periodic
- * synchronization to implement "quick" read. There are trade-off between
- * reading cost and precision of value. Then, we may have a chance to implement
- * a periodic synchronization of counter in memcg's counter.
- *
- * But this _read() function is used for user interface now. The user accounts
- * memory usage by memory cgroup and he _always_ requires exact value because
- * he accounts memory. Even if we provide quick-and-fuzzy read, we always
- * have to visit all online cpus and make sum. So, for now, unnecessary
- * synchronization is not implemented. (just implemented for cpu hotplug)
- *
- * If there are kernel internal actions which can make use of some not-exact
- * value, and reading all cpu value can be performance bottleneck in some
- * common workload, threshold and synchronization as vmstat[] should be
- * implemented.
- *
- * The parameter idx can be of type enum memcg_event_item or vm_event_item.
- */
-
static unsigned long memcg_sum_events(struct mem_cgroup *memcg,
int event)
{
- unsigned long val = 0;
- int cpu;
-
- for_each_possible_cpu(cpu)
- val += per_cpu(memcg->stat->events[event], cpu);
- return val;
+ return atomic_long_read(&memcg->events[event]);
}
static void mem_cgroup_charge_statistics(struct mem_cgroup *memcg,
@@ -606,7 +577,7 @@ static void mem_cgroup_charge_statistics
nr_pages = -nr_pages; /* for event */
}
- __this_cpu_add(memcg->stat->nr_page_events, nr_pages);
+ __this_cpu_add(memcg->stat_cpu->nr_page_events, nr_pages);
}
unsigned long mem_cgroup_node_nr_lru_pages(struct mem_cgroup *memcg,
@@ -642,8 +613,8 @@ static bool mem_cgroup_event_ratelimit(s
{
unsigned long val, next;
- val = __this_cpu_read(memcg->stat->nr_page_events);
- next = __this_cpu_read(memcg->stat->targets[target]);
+ val = __this_cpu_read(memcg->stat_cpu->nr_page_events);
+ next = __this_cpu_read(memcg->stat_cpu->targets[target]);
/* from time_after() in jiffies.h */
if ((long)(next - val) < 0) {
switch (target) {
@@ -659,7 +630,7 @@ static bool mem_cgroup_event_ratelimit(s
default:
break;
}
- __this_cpu_write(memcg->stat->targets[target], next);
+ __this_cpu_write(memcg->stat_cpu->targets[target], next);
return true;
}
return false;
@@ -1726,11 +1697,6 @@ void unlock_page_memcg(struct page *page
}
EXPORT_SYMBOL(unlock_page_memcg);
-/*
- * size of first charge trial. "32" comes from vmscan.c's magic value.
- * TODO: maybe necessary to use big numbers in big irons.
- */
-#define CHARGE_BATCH 32U
struct memcg_stock_pcp {
struct mem_cgroup *cached; /* this never be root cgroup */
unsigned int nr_pages;
@@ -1758,7 +1724,7 @@ static bool consume_stock(struct mem_cgr
unsigned long flags;
bool ret = false;
- if (nr_pages > CHARGE_BATCH)
+ if (nr_pages > MEMCG_CHARGE_BATCH)
return ret;
local_irq_save(flags);
@@ -1827,7 +1793,7 @@ static void refill_stock(struct mem_cgro
}
stock->nr_pages += nr_pages;
- if (stock->nr_pages > CHARGE_BATCH)
+ if (stock->nr_pages > MEMCG_CHARGE_BATCH)
drain_stock(stock);
local_irq_restore(flags);
@@ -1877,9 +1843,44 @@ static void drain_all_stock(struct mem_c
static int memcg_hotplug_cpu_dead(unsigned int cpu)
{
struct memcg_stock_pcp *stock;
+ struct mem_cgroup *memcg;
stock = &per_cpu(memcg_stock, cpu);
drain_stock(stock);
+
+ for_each_mem_cgroup(memcg) {
+ int i;
+
+ for (i = 0; i < MEMCG_NR_STAT; i++) {
+ int nid;
+ long x;
+
+ x = this_cpu_xchg(memcg->stat_cpu->count[i], 0);
+ if (x)
+ atomic_long_add(x, &memcg->stat[i]);
+
+ if (i >= NR_VM_NODE_STAT_ITEMS)
+ continue;
+
+ for_each_node(nid) {
+ struct mem_cgroup_per_node *pn;
+
+ pn = mem_cgroup_nodeinfo(memcg, nid);
+ x = this_cpu_xchg(pn->lruvec_stat_cpu->count[i], 0);
+ if (x)
+ atomic_long_add(x, &pn->lruvec_stat[i]);
+ }
+ }
+
+ for (i = 0; i < MEMCG_NR_EVENTS; i++) {
+ long x;
+
+ x = this_cpu_xchg(memcg->stat_cpu->events[i], 0);
+ if (x)
+ atomic_long_add(x, &memcg->events[i]);
+ }
+ }
+
return 0;
}
@@ -1900,7 +1901,7 @@ static void high_work_func(struct work_s
struct mem_cgroup *memcg;
memcg = container_of(work, struct mem_cgroup, high_work);
- reclaim_high(memcg, CHARGE_BATCH, GFP_KERNEL);
+ reclaim_high(memcg, MEMCG_CHARGE_BATCH, GFP_KERNEL);
}
/*
@@ -1924,7 +1925,7 @@ void mem_cgroup_handle_over_high(void)
static int try_charge(struct mem_cgroup *memcg, gfp_t gfp_mask,
unsigned int nr_pages)
{
- unsigned int batch = max(CHARGE_BATCH, nr_pages);
+ unsigned int batch = max(MEMCG_CHARGE_BATCH, nr_pages);
int nr_retries = MEM_CGROUP_RECLAIM_RETRIES;
struct mem_cgroup *mem_over_limit;
struct page_counter *counter;
@@ -4203,8 +4204,8 @@ static int alloc_mem_cgroup_per_node_inf
if (!pn)
return 1;
- pn->lruvec_stat = alloc_percpu(struct lruvec_stat);
- if (!pn->lruvec_stat) {
+ pn->lruvec_stat_cpu = alloc_percpu(struct lruvec_stat);
+ if (!pn->lruvec_stat_cpu) {
kfree(pn);
return 1;
}
@@ -4225,7 +4226,7 @@ static void free_mem_cgroup_per_node_inf
if (!pn)
return;
- free_percpu(pn->lruvec_stat);
+ free_percpu(pn->lruvec_stat_cpu);
kfree(pn);
}
@@ -4235,7 +4236,7 @@ static void __mem_cgroup_free(struct mem
for_each_node(node)
free_mem_cgroup_per_node_info(memcg, node);
- free_percpu(memcg->stat);
+ free_percpu(memcg->stat_cpu);
kfree(memcg);
}
@@ -4264,8 +4265,8 @@ static struct mem_cgroup *mem_cgroup_all
if (memcg->id.id < 0)
goto fail;
- memcg->stat = alloc_percpu(struct mem_cgroup_stat_cpu);
- if (!memcg->stat)
+ memcg->stat_cpu = alloc_percpu(struct mem_cgroup_stat_cpu);
+ if (!memcg->stat_cpu)
goto fail;
for_each_node(node)
@@ -5686,7 +5687,7 @@ static void uncharge_batch(const struct
__mod_memcg_state(ug->memcg, MEMCG_RSS_HUGE, -ug->nr_huge);
__mod_memcg_state(ug->memcg, NR_SHMEM, -ug->nr_shmem);
__count_memcg_events(ug->memcg, PGPGOUT, ug->pgpgout);
- __this_cpu_add(ug->memcg->stat->nr_page_events, nr_pages);
+ __this_cpu_add(ug->memcg->stat_cpu->nr_page_events, nr_pages);
memcg_check_events(ug->memcg, ug->dummy_page);
local_irq_restore(flags);
From: Josh Poimboeuf <[email protected]>
commit aa8c7db494d0a83ecae583aa193f1134ef25d506 upstream.
Silly GCC doesn't always inline these trivial functions.
Fixes the following warning:
arch/x86/kernel/sys_ia32.o: warning: objtool: cp_stat64()+0xd8: call to new_encode_dev() with UACCESS enabled
Link: https://lkml.kernel.org/r/984353b44a4484d86ba9f73884b7306232e25e30.1608737428.git.jpoimboe@redhat.com
Signed-off-by: Josh Poimboeuf <[email protected]>
Reported-by: Randy Dunlap <[email protected]>
Acked-by: Randy Dunlap <[email protected]> [build-tested]
Cc: Peter Zijlstra <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/kdev_t.h | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
--- a/include/linux/kdev_t.h
+++ b/include/linux/kdev_t.h
@@ -21,61 +21,61 @@
})
/* acceptable for old filesystems */
-static inline bool old_valid_dev(dev_t dev)
+static __always_inline bool old_valid_dev(dev_t dev)
{
return MAJOR(dev) < 256 && MINOR(dev) < 256;
}
-static inline u16 old_encode_dev(dev_t dev)
+static __always_inline u16 old_encode_dev(dev_t dev)
{
return (MAJOR(dev) << 8) | MINOR(dev);
}
-static inline dev_t old_decode_dev(u16 val)
+static __always_inline dev_t old_decode_dev(u16 val)
{
return MKDEV((val >> 8) & 255, val & 255);
}
-static inline u32 new_encode_dev(dev_t dev)
+static __always_inline u32 new_encode_dev(dev_t dev)
{
unsigned major = MAJOR(dev);
unsigned minor = MINOR(dev);
return (minor & 0xff) | (major << 8) | ((minor & ~0xff) << 12);
}
-static inline dev_t new_decode_dev(u32 dev)
+static __always_inline dev_t new_decode_dev(u32 dev)
{
unsigned major = (dev & 0xfff00) >> 8;
unsigned minor = (dev & 0xff) | ((dev >> 12) & 0xfff00);
return MKDEV(major, minor);
}
-static inline u64 huge_encode_dev(dev_t dev)
+static __always_inline u64 huge_encode_dev(dev_t dev)
{
return new_encode_dev(dev);
}
-static inline dev_t huge_decode_dev(u64 dev)
+static __always_inline dev_t huge_decode_dev(u64 dev)
{
return new_decode_dev(dev);
}
-static inline int sysv_valid_dev(dev_t dev)
+static __always_inline int sysv_valid_dev(dev_t dev)
{
return MAJOR(dev) < (1<<14) && MINOR(dev) < (1<<18);
}
-static inline u32 sysv_encode_dev(dev_t dev)
+static __always_inline u32 sysv_encode_dev(dev_t dev)
{
return MINOR(dev) | (MAJOR(dev) << 18);
}
-static inline unsigned sysv_major(u32 dev)
+static __always_inline unsigned sysv_major(u32 dev)
{
return (dev >> 18) & 0x3fff;
}
-static inline unsigned sysv_minor(u32 dev)
+static __always_inline unsigned sysv_minor(u32 dev)
{
return dev & 0x3ffff;
}
From: Jonathan Cameron <[email protected]>
commit 7b6b51234df6cd8b04fe736b0b89c25612d896b8 upstream
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable array in the iio_priv() data with alignment
explicitly requested. This data is allocated with kzalloc() so no
data can leak apart from previous readings.
In this driver, depending on which channels are enabled, the timestamp
can be in a number of locations. Hence we cannot use a structure
to specify the data layout without it being misleading.
Fixes: 77c4ad2d6a9b ("iio: imu: Add initial support for Bosch BMI160")
Reported-by: Lars-Peter Clausen <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Reviewed-by: Alexandru Ardelean <[email protected]>
Cc: Daniel Baluta <[email protected]>
Cc: Daniel Baluta <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[sudip: adjust context and use bmi160_data in old location]
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/imu/bmi160/bmi160_core.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
--- a/drivers/iio/imu/bmi160/bmi160_core.c
+++ b/drivers/iio/imu/bmi160/bmi160_core.c
@@ -110,6 +110,13 @@ enum bmi160_sensor_type {
struct bmi160_data {
struct regmap *regmap;
+ /*
+ * Ensure natural alignment for timestamp if present.
+ * Max length needed: 2 * 3 channels + 4 bytes padding + 8 byte ts.
+ * If fewer channels are enabled, less space may be needed, as
+ * long as the timestamp is still aligned to 8 bytes.
+ */
+ __le16 buf[12] __aligned(8);
};
const struct regmap_config bmi160_regmap_config = {
@@ -385,8 +392,6 @@ static irqreturn_t bmi160_trigger_handle
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct bmi160_data *data = iio_priv(indio_dev);
- __le16 buf[12];
- /* 2 sens x 3 axis x __le16 + 2 x __le16 pad + 4 x __le16 tstamp */
int i, ret, j = 0, base = BMI160_REG_DATA_MAGN_XOUT_L;
__le16 sample;
@@ -396,10 +401,10 @@ static irqreturn_t bmi160_trigger_handle
&sample, sizeof(sample));
if (ret < 0)
goto done;
- buf[j++] = sample;
+ data->buf[j++] = sample;
}
- iio_push_to_buffers_with_timestamp(indio_dev, buf,
+ iio_push_to_buffers_with_timestamp(indio_dev, data->buf,
iio_get_time_ns(indio_dev));
done:
iio_trigger_notify_done(indio_dev->trig);
From: Johannes Weiner <[email protected]>
commit 284542656e22c43fdada8c8cc0ca9ede8453eed7 upstream
The implementation of the lruvec stat functions and their variants for
accounting through a page, or accounting from a preemptible context, are
mostly identical and needlessly repetitive.
Implement the lruvec_page functions by looking up the page's lruvec and
then using the lruvec function.
Implement the functions for preemptible contexts by disabling preemption
before calling the atomic context functions.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Johannes Weiner <[email protected]>
Acked-by: Vladimir Davydov <[email protected]>
Cc: Michal Hocko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Cc: [email protected]
Signed-off-by: Shaoying Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/memcontrol.h | 44 ++++++++++++++++++++++----------------------
1 file changed, 22 insertions(+), 22 deletions(-)
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -569,51 +569,51 @@ static inline void __mod_lruvec_state(st
{
struct mem_cgroup_per_node *pn;
+ /* Update node */
__mod_node_page_state(lruvec_pgdat(lruvec), idx, val);
+
if (mem_cgroup_disabled())
return;
+
pn = container_of(lruvec, struct mem_cgroup_per_node, lruvec);
+
+ /* Update memcg */
__mod_memcg_state(pn->memcg, idx, val);
+
+ /* Update lruvec */
__this_cpu_add(pn->lruvec_stat->count[idx], val);
}
static inline void mod_lruvec_state(struct lruvec *lruvec,
enum node_stat_item idx, int val)
{
- struct mem_cgroup_per_node *pn;
-
- mod_node_page_state(lruvec_pgdat(lruvec), idx, val);
- if (mem_cgroup_disabled())
- return;
- pn = container_of(lruvec, struct mem_cgroup_per_node, lruvec);
- mod_memcg_state(pn->memcg, idx, val);
- this_cpu_add(pn->lruvec_stat->count[idx], val);
+ preempt_disable();
+ __mod_lruvec_state(lruvec, idx, val);
+ preempt_enable();
}
static inline void __mod_lruvec_page_state(struct page *page,
enum node_stat_item idx, int val)
{
- struct mem_cgroup_per_node *pn;
+ pg_data_t *pgdat = page_pgdat(page);
+ struct lruvec *lruvec;
- __mod_node_page_state(page_pgdat(page), idx, val);
- if (mem_cgroup_disabled() || !page->mem_cgroup)
+ /* Untracked pages have no memcg, no lruvec. Update only the node */
+ if (!page->mem_cgroup) {
+ __mod_node_page_state(pgdat, idx, val);
return;
- __mod_memcg_state(page->mem_cgroup, idx, val);
- pn = page->mem_cgroup->nodeinfo[page_to_nid(page)];
- __this_cpu_add(pn->lruvec_stat->count[idx], val);
+ }
+
+ lruvec = mem_cgroup_lruvec(pgdat, page->mem_cgroup);
+ __mod_lruvec_state(lruvec, idx, val);
}
static inline void mod_lruvec_page_state(struct page *page,
enum node_stat_item idx, int val)
{
- struct mem_cgroup_per_node *pn;
-
- mod_node_page_state(page_pgdat(page), idx, val);
- if (mem_cgroup_disabled() || !page->mem_cgroup)
- return;
- mod_memcg_state(page->mem_cgroup, idx, val);
- pn = page->mem_cgroup->nodeinfo[page_to_nid(page)];
- this_cpu_add(pn->lruvec_stat->count[idx], val);
+ preempt_disable();
+ __mod_lruvec_page_state(page, idx, val);
+ preempt_enable();
}
unsigned long mem_cgroup_soft_limit_reclaim(pg_data_t *pgdat, int order,
From: Jonathan Cameron <[email protected]>
commit 89deb1334252ea4a8491d47654811e28b0790364 upstream
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp() assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data.
This data is allocated with kzalloc() so no data can leak apart from
previous readings.
The explicit alignment of ts is not necessary in this case but
does make the code slightly less fragile so I have included it.
Fixes: 39631b5f9584 ("iio: Add Freescale mag3110 magnetometer driver")
Reported-by: Lars-Peter Clausen <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Reviewed-by: Alexandru Ardelean <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/magnetometer/mag3110.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
--- a/drivers/iio/magnetometer/mag3110.c
+++ b/drivers/iio/magnetometer/mag3110.c
@@ -52,6 +52,12 @@ struct mag3110_data {
struct i2c_client *client;
struct mutex lock;
u8 ctrl_reg1;
+ /* Ensure natural alignment of timestamp */
+ struct {
+ __be16 channels[3];
+ u8 temperature;
+ s64 ts __aligned(8);
+ } scan;
};
static int mag3110_request(struct mag3110_data *data)
@@ -262,10 +268,9 @@ static irqreturn_t mag3110_trigger_handl
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct mag3110_data *data = iio_priv(indio_dev);
- u8 buffer[16]; /* 3 16-bit channels + 1 byte temp + padding + ts */
int ret;
- ret = mag3110_read(data, (__be16 *) buffer);
+ ret = mag3110_read(data, data->scan.channels);
if (ret < 0)
goto done;
@@ -274,10 +279,10 @@ static irqreturn_t mag3110_trigger_handl
MAG3110_DIE_TEMP);
if (ret < 0)
goto done;
- buffer[6] = ret;
+ data->scan.temperature = ret;
}
- iio_push_to_buffers_with_timestamp(indio_dev, buffer,
+ iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
iio_get_time_ns(indio_dev));
done:
From: Alberto Aguirre <[email protected]>
commit 103e9625647ad74d201e26fb74afcd8479142a37 upstream
Signed-off-by: Alberto Aguirre <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/pcm.c | 52 ++++++++++++++++++++--------------------------------
1 file changed, 20 insertions(+), 32 deletions(-)
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -324,6 +324,7 @@ static int set_sync_ep_implicit_fb_quirk
struct usb_host_interface *alts;
struct usb_interface *iface;
unsigned int ep;
+ unsigned int ifnum;
/* Implicit feedback sync EPs consumers are always playback EPs */
if (subs->direction != SNDRV_PCM_STREAM_PLAYBACK)
@@ -334,44 +335,23 @@ static int set_sync_ep_implicit_fb_quirk
case USB_ID(0x0763, 0x2031): /* M-Audio Fast Track C600 */
case USB_ID(0x22f0, 0x0006): /* Allen&Heath Qu-16 */
ep = 0x81;
- iface = usb_ifnum_to_if(dev, 3);
-
- if (!iface || iface->num_altsetting == 0)
- return -EINVAL;
-
- alts = &iface->altsetting[1];
- goto add_sync_ep;
- break;
+ ifnum = 3;
+ goto add_sync_ep_from_ifnum;
case USB_ID(0x0763, 0x2080): /* M-Audio FastTrack Ultra */
case USB_ID(0x0763, 0x2081):
ep = 0x81;
- iface = usb_ifnum_to_if(dev, 2);
-
- if (!iface || iface->num_altsetting == 0)
- return -EINVAL;
-
- alts = &iface->altsetting[1];
- goto add_sync_ep;
- case USB_ID(0x2466, 0x8003):
+ ifnum = 2;
+ goto add_sync_ep_from_ifnum;
+ case USB_ID(0x2466, 0x8003): /* Fractal Audio Axe-Fx II */
ep = 0x86;
- iface = usb_ifnum_to_if(dev, 2);
-
- if (!iface || iface->num_altsetting == 0)
- return -EINVAL;
-
- alts = &iface->altsetting[1];
- goto add_sync_ep;
- case USB_ID(0x1397, 0x0002):
+ ifnum = 2;
+ goto add_sync_ep_from_ifnum;
+ case USB_ID(0x1397, 0x0002): /* Behringer UFX1204 */
ep = 0x81;
- iface = usb_ifnum_to_if(dev, 1);
-
- if (!iface || iface->num_altsetting == 0)
- return -EINVAL;
-
- alts = &iface->altsetting[1];
- goto add_sync_ep;
-
+ ifnum = 1;
+ goto add_sync_ep_from_ifnum;
}
+
if (attr == USB_ENDPOINT_SYNC_ASYNC &&
altsd->bInterfaceClass == USB_CLASS_VENDOR_SPEC &&
altsd->bInterfaceProtocol == 2 &&
@@ -386,6 +366,14 @@ static int set_sync_ep_implicit_fb_quirk
/* No quirk */
return 0;
+add_sync_ep_from_ifnum:
+ iface = usb_ifnum_to_if(dev, ifnum);
+
+ if (!iface || iface->num_altsetting == 0)
+ return -EINVAL;
+
+ alts = &iface->altsetting[1];
+
add_sync_ep:
subs->sync_endpoint = snd_usb_add_endpoint(subs->stream->chip,
alts, ep, !subs->direction,
From: Zhang Xiaohui <[email protected]>
[ Upstream commit 5c455c5ab332773464d02ba17015acdca198f03d ]
mwifiex_cmd_802_11_ad_hoc_start() calls memcpy() without checking
the destination size may trigger a buffer overflower,
which a local user could use to cause denial of service
or the execution of arbitrary code.
Fix it by putting the length check before calling memcpy().
Signed-off-by: Zhang Xiaohui <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/join.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/marvell/mwifiex/join.c b/drivers/net/wireless/marvell/mwifiex/join.c
index d87aeff70cefb..c2cb1e711c06e 100644
--- a/drivers/net/wireless/marvell/mwifiex/join.c
+++ b/drivers/net/wireless/marvell/mwifiex/join.c
@@ -877,6 +877,8 @@ mwifiex_cmd_802_11_ad_hoc_start(struct mwifiex_private *priv,
memset(adhoc_start->ssid, 0, IEEE80211_MAX_SSID_LEN);
+ if (req_ssid->ssid_len > IEEE80211_MAX_SSID_LEN)
+ req_ssid->ssid_len = IEEE80211_MAX_SSID_LEN;
memcpy(adhoc_start->ssid, req_ssid->ssid, req_ssid->ssid_len);
mwifiex_dbg(adapter, INFO, "info: ADHOC_S_CMD: SSID = %s\n",
--
2.27.0
From: Eric Auger <[email protected]>
[ Upstream commit 16b8fe4caf499ae8e12d2ab1b1324497e36a7b83 ]
In case an error occurs in vfio_pci_enable() before the call to
vfio_pci_probe_mmaps(), vfio_pci_disable() will try to iterate
on an uninitialized list and cause a kernel panic.
Lets move to the initialization to vfio_pci_probe() to fix the
issue.
Signed-off-by: Eric Auger <[email protected]>
Fixes: 05f0c03fbac1 ("vfio-pci: Allow to mmap sub-page MMIO BARs if the mmio page is exclusive")
CC: Stable <[email protected]> # v4.7+
Signed-off-by: Alex Williamson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/vfio/pci/vfio_pci.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index 6fceefcab81db..dedc7edea5178 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -118,8 +118,6 @@ static void vfio_pci_probe_mmaps(struct vfio_pci_device *vdev)
int bar;
struct vfio_pci_dummy_resource *dummy_res;
- INIT_LIST_HEAD(&vdev->dummy_resources_list);
-
for (bar = PCI_STD_RESOURCES; bar <= PCI_STD_RESOURCE_END; bar++) {
res = vdev->pdev->resource + bar;
@@ -1524,6 +1522,7 @@ static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
vdev->irq_type = VFIO_PCI_NUM_IRQS;
mutex_init(&vdev->igate);
spin_lock_init(&vdev->irqlock);
+ INIT_LIST_HEAD(&vdev->dummy_resources_list);
mutex_init(&vdev->vma_lock);
INIT_LIST_HEAD(&vdev->vma_list);
init_rwsem(&vdev->memory_lock);
--
2.27.0
From: Johan Hovold <[email protected]>
commit 5d1b71226dc4d44b4b65766fa9d74492f9d4587b upstream
The altsetting sanity check in set_sync_ep_implicit_fb_quirk() was
checking for there to be at least one altsetting but then went on to
access the second one, which may not exist.
This could lead to random slab data being used to initialise the sync
endpoint in snd_usb_add_endpoint().
Fixes: c75a8a7ae565 ("ALSA: snd-usb: add support for implicit feedback")
Fixes: ca10a7ebdff1 ("ALSA: usb-audio: FT C400 sync playback EP to capture EP")
Fixes: 5e35dc0338d8 ("ALSA: usb-audio: add implicit fb quirk for Behringer UFX1204")
Fixes: 17f08b0d9aaf ("ALSA: usb-audio: add implicit fb quirk for Axe-Fx II")
Fixes: 103e9625647a ("ALSA: usb-audio: simplify set_sync_ep_implicit_fb_quirk")
Cc: stable <[email protected]> # 3.5
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/pcm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -369,7 +369,7 @@ static int set_sync_ep_implicit_fb_quirk
add_sync_ep_from_ifnum:
iface = usb_ifnum_to_if(dev, ifnum);
- if (!iface || iface->num_altsetting == 0)
+ if (!iface || iface->num_altsetting < 2)
return -EINVAL;
alts = &iface->altsetting[1];
From: Jessica Yu <[email protected]>
[ Upstream commit 38dc717e97153e46375ee21797aa54777e5498f3 ]
Apparently there has been a longstanding race between udev/systemd and
the module loader. Currently, the module loader sends a uevent right
after sysfs initialization, but before the module calls its init
function. However, some udev rules expect that the module has
initialized already upon receiving the uevent.
This race has been triggered recently (see link in references) in some
systemd mount unit files. For instance, the configfs module creates the
/sys/kernel/config mount point in its init function, however the module
loader issues the uevent before this happens. sys-kernel-config.mount
expects to be able to mount /sys/kernel/config upon receipt of the
module loading uevent, but if the configfs module has not called its
init function yet, then this directory will not exist and the mount unit
fails. A similar situation exists for sys-fs-fuse-connections.mount, as
the fuse sysfs mount point is created during the fuse module's init
function. If udev is faster than module initialization then the mount
unit would fail in a similar fashion.
To fix this race, delay the module KOBJ_ADD uevent until after the
module has finished calling its init routine.
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Tested-By: Nicolas Morey-Chaisemartin <[email protected]>
Signed-off-by: Jessica Yu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/module.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/kernel/module.c b/kernel/module.c
index c4f0a8fe144e1..0b2654592d3a7 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1789,7 +1789,6 @@ static int mod_sysfs_init(struct module *mod)
if (err)
mod_kobject_put(mod);
- /* delay uevent until full sysfs population */
out:
return err;
}
@@ -1826,7 +1825,6 @@ static int mod_sysfs_setup(struct module *mod,
add_sect_attrs(mod, info);
add_notes_attrs(mod, info);
- kobject_uevent(&mod->mkobj.kobj, KOBJ_ADD);
return 0;
out_unreg_modinfo_attrs:
@@ -3481,6 +3479,9 @@ static noinline int do_init_module(struct module *mod)
blocking_notifier_call_chain(&module_notify_list,
MODULE_STATE_LIVE, mod);
+ /* Delay uevent until module has finished its init routine */
+ kobject_uevent(&mod->mkobj.kobj, KOBJ_ADD);
+
/*
* We need to finish all async code before the module init sequence
* is done. This has potential to deadlock. For example, a newly
--
2.27.0
From: Jan Kara <[email protected]>
[ Upstream commit 10f04d40a9fa29785206c619f80d8beedb778837 ]
The on-disk quota format supports quota files with upto 2^32 blocks. Be
careful when computing quota file offsets in the quota files from block
numbers as they can overflow 32-bit types. Since quota files larger than
4GB would require ~26 millions of quota users, this is mostly a
theoretical concern now but better be careful, fuzzers would find the
problem sooner or later anyway...
Reviewed-by: Andreas Dilger <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/quota/quota_tree.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/fs/quota/quota_tree.c b/fs/quota/quota_tree.c
index bb3f59bcfcf5b..656f9ff63edda 100644
--- a/fs/quota/quota_tree.c
+++ b/fs/quota/quota_tree.c
@@ -61,7 +61,7 @@ static ssize_t read_blk(struct qtree_mem_dqinfo *info, uint blk, char *buf)
memset(buf, 0, info->dqi_usable_bs);
return sb->s_op->quota_read(sb, info->dqi_type, buf,
- info->dqi_usable_bs, blk << info->dqi_blocksize_bits);
+ info->dqi_usable_bs, (loff_t)blk << info->dqi_blocksize_bits);
}
static ssize_t write_blk(struct qtree_mem_dqinfo *info, uint blk, char *buf)
@@ -70,7 +70,7 @@ static ssize_t write_blk(struct qtree_mem_dqinfo *info, uint blk, char *buf)
ssize_t ret;
ret = sb->s_op->quota_write(sb, info->dqi_type, buf,
- info->dqi_usable_bs, blk << info->dqi_blocksize_bits);
+ info->dqi_usable_bs, (loff_t)blk << info->dqi_blocksize_bits);
if (ret != info->dqi_usable_bs) {
quota_error(sb, "dquota write failed");
if (ret >= 0)
@@ -283,7 +283,7 @@ static uint find_free_dqentry(struct qtree_mem_dqinfo *info,
blk);
goto out_buf;
}
- dquot->dq_off = (blk << info->dqi_blocksize_bits) +
+ dquot->dq_off = ((loff_t)blk << info->dqi_blocksize_bits) +
sizeof(struct qt_disk_dqdbheader) +
i * info->dqi_entry_size;
kfree(buf);
@@ -558,7 +558,7 @@ static loff_t find_block_dqentry(struct qtree_mem_dqinfo *info,
ret = -EIO;
goto out_buf;
} else {
- ret = (blk << info->dqi_blocksize_bits) + sizeof(struct
+ ret = ((loff_t)blk << info->dqi_blocksize_bits) + sizeof(struct
qt_disk_dqdbheader) + i * info->dqi_entry_size;
}
out_buf:
--
2.27.0
From: Mauro Carvalho Chehab <[email protected]>
commit d0ac1a26ed5943127cb0156148735f5f52a07075 upstream.
As reported on:
https://lore.kernel.org/linux-media/[email protected]/
if gp8psk_usb_in_op() returns an error, the status var is not
initialized. Yet, this var is used later on, in order to
identify:
- if the device was already started;
- if firmware has loaded;
- if the LNBf was powered on.
Using status = 0 seems to ensure that everything will be
properly powered up.
So, instead of the proposed solution, let's just set
status = 0.
Reported-by: syzbot <[email protected]>
Reported-by: Willem de Bruijn <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/dvb-usb/gp8psk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/media/usb/dvb-usb/gp8psk.c
+++ b/drivers/media/usb/dvb-usb/gp8psk.c
@@ -185,7 +185,7 @@ out_rel_fw:
static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff)
{
- u8 status, buf;
+ u8 status = 0, buf;
int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct);
if (onoff) {
From: Takashi Iwai <[email protected]>
commit 4ebd47037027c4beae99680bff3b20fdee5d7c1e upstream.
The snd_seq_queue struct contains various flags in the bit fields.
Those are categorized to two different use cases, both of which are
protected by different spinlocks. That implies that there are still
potential risks of the bad operations for bit fields by concurrent
accesses.
For addressing the problem, this patch rearranges those flags to be
a standard bool instead of a bit field.
Reported-by: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/seq/seq_queue.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/sound/core/seq/seq_queue.h
+++ b/sound/core/seq/seq_queue.h
@@ -40,10 +40,10 @@ struct snd_seq_queue {
struct snd_seq_timer *timer; /* time keeper for this queue */
int owner; /* client that 'owns' the timer */
- unsigned int locked:1, /* timer is only accesibble by owner if set */
- klocked:1, /* kernel lock (after START) */
- check_again:1,
- check_blocked:1;
+ bool locked; /* timer is only accesibble by owner if set */
+ bool klocked; /* kernel lock (after START) */
+ bool check_again; /* concurrent access happened during check */
+ bool check_blocked; /* queue being checked */
unsigned int flags; /* status flags */
unsigned int info_flags; /* info for sync */
From: Hyeongseok Kim <[email protected]>
[ Upstream commit 252bd1256396cebc6fc3526127fdb0b317601318 ]
If emergency system shutdown is called, like by thermal shutdown,
a dm device could be alive when the block device couldn't process
I/O requests anymore. In this state, the handling of I/O errors
by new dm I/O requests or by those already in-flight can lead to
a verity corruption state, which is a misjudgment.
So, skip verity work in response to I/O error when system is shutting
down.
Signed-off-by: Hyeongseok Kim <[email protected]>
Reviewed-by: Sami Tolvanen <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/dm-verity-target.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/md/dm-verity-target.c b/drivers/md/dm-verity-target.c
index e705799976c2c..2dae30713eb3d 100644
--- a/drivers/md/dm-verity-target.c
+++ b/drivers/md/dm-verity-target.c
@@ -551,6 +551,15 @@ static int verity_verify_io(struct dm_verity_io *io)
return 0;
}
+/*
+ * Skip verity work in response to I/O error when system is shutting down.
+ */
+static inline bool verity_is_system_shutting_down(void)
+{
+ return system_state == SYSTEM_HALT || system_state == SYSTEM_POWER_OFF
+ || system_state == SYSTEM_RESTART;
+}
+
/*
* End one "io" structure with a given error.
*/
@@ -578,7 +587,8 @@ static void verity_end_io(struct bio *bio)
{
struct dm_verity_io *io = bio->bi_private;
- if (bio->bi_status && !verity_fec_is_enabled(io->v)) {
+ if (bio->bi_status &&
+ (!verity_fec_is_enabled(io->v) || verity_is_system_shutting_down())) {
verity_finish_io(io, bio->bi_status);
return;
}
--
2.27.0
From: Takashi Iwai <[email protected]>
[ Upstream commit 618de0f4ef11acd8cf26902e65493d46cc20cc89 ]
The PCM hw_params core function tries to clear up the PCM buffer
before actually using for avoiding the information leak from the
previous usages or the usage before a new allocation. It performs the
memset() with runtime->dma_bytes, but this might still leave some
remaining bytes untouched; namely, the PCM buffer size is aligned in
page size for mmap, hence runtime->dma_bytes doesn't necessarily cover
all PCM buffer pages, and the remaining bytes are exposed via mmap.
This patch changes the memory clearance to cover the all buffer pages
if the stream is supposed to be mmap-ready (that guarantees that the
buffer size is aligned in page size).
Reviewed-by: Lars-Peter Clausen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/pcm_native.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index 071e09c3d8557..c78db361cbbaa 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -721,8 +721,13 @@ static int snd_pcm_hw_params(struct snd_pcm_substream *substream,
runtime->boundary *= 2;
/* clear the buffer for avoiding possible kernel info leaks */
- if (runtime->dma_area && !substream->ops->copy_user)
- memset(runtime->dma_area, 0, runtime->dma_bytes);
+ if (runtime->dma_area && !substream->ops->copy_user) {
+ size_t size = runtime->dma_bytes;
+
+ if (runtime->info & SNDRV_PCM_INFO_MMAP)
+ size = PAGE_ALIGN(size);
+ memset(runtime->dma_area, 0, size);
+ }
snd_pcm_timer_resolution_change(substream);
snd_pcm_set_state(substream, SNDRV_PCM_STATE_SETUP);
--
2.27.0
From: Takashi Iwai <[email protected]>
commit 42fb6b1d41eb5905d77c06cad2e87b70289bdb76 upstream
CA0132 has the delayed HP jack detection code that is invoked from the
unsol handler, but it does a few weird things: it contains the cancel
of a work inside the work handler, and yet it misses the cancel-sync
call at (runtime-)suspend. This patch addresses those issues.
Fixes: 15c2b3cc09a3 ("ALSA: hda/ca0132 - Fix possible workqueue stall")
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_ca0132.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -4443,11 +4443,10 @@ static void hp_callback(struct hda_codec
/* Delay enabling the HP amp, to let the mic-detection
* state machine run.
*/
- cancel_delayed_work(&spec->unsol_hp_work);
- schedule_delayed_work(&spec->unsol_hp_work, msecs_to_jiffies(500));
tbl = snd_hda_jack_tbl_get(codec, cb->nid);
if (tbl)
tbl->block_report = 1;
+ schedule_delayed_work(&spec->unsol_hp_work, msecs_to_jiffies(500));
}
static void amic_callback(struct hda_codec *codec, struct hda_jack_callback *cb)
@@ -4625,12 +4624,25 @@ static void ca0132_free(struct hda_codec
kfree(codec->spec);
}
+#ifdef CONFIG_PM
+static int ca0132_suspend(struct hda_codec *codec)
+{
+ struct ca0132_spec *spec = codec->spec;
+
+ cancel_delayed_work_sync(&spec->unsol_hp_work);
+ return 0;
+}
+#endif
+
static const struct hda_codec_ops ca0132_patch_ops = {
.build_controls = ca0132_build_controls,
.build_pcms = ca0132_build_pcms,
.init = ca0132_init,
.free = ca0132_free,
.unsol_event = snd_hda_jack_unsol_event,
+#ifdef CONFIG_PM
+ .suspend = ca0132_suspend,
+#endif
};
static void ca0132_config(struct hda_codec *codec)
From: Petr Vorel <[email protected]>
commit a85cbe6159ffc973e5702f70a3bd5185f8f3c38d upstream.
and include <linux/const.h> in UAPI headers instead of <linux/kernel.h>.
The reason is to avoid indirect <linux/sysinfo.h> include when using
some network headers: <linux/netlink.h> or others -> <linux/kernel.h>
-> <linux/sysinfo.h>.
This indirect include causes on MUSL redefinition of struct sysinfo when
included both <sys/sysinfo.h> and some of UAPI headers:
In file included from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/kernel.h:5,
from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/netlink.h:5,
from ../include/tst_netlink.h:14,
from tst_crypto.c:13:
x86_64-buildroot-linux-musl/sysroot/usr/include/linux/sysinfo.h:8:8: error: redefinition of `struct sysinfo'
struct sysinfo {
^~~~~~~
In file included from ../include/tst_safe_macros.h:15,
from ../include/tst_test.h:93,
from tst_crypto.c:11:
x86_64-buildroot-linux-musl/sysroot/usr/include/sys/sysinfo.h:10:8: note: originally defined here
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Petr Vorel <[email protected]>
Suggested-by: Rich Felker <[email protected]>
Acked-by: Rich Felker <[email protected]>
Cc: Peter Korsgaard <[email protected]>
Cc: Baruch Siach <[email protected]>
Cc: Florian Weimer <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/uapi/linux/const.h | 5 +++++
include/uapi/linux/ethtool.h | 2 +-
include/uapi/linux/kernel.h | 9 +--------
include/uapi/linux/lightnvm.h | 2 +-
include/uapi/linux/mroute6.h | 2 +-
include/uapi/linux/netfilter/x_tables.h | 2 +-
include/uapi/linux/netlink.h | 2 +-
include/uapi/linux/sysctl.h | 2 +-
8 files changed, 12 insertions(+), 14 deletions(-)
--- a/include/uapi/linux/const.h
+++ b/include/uapi/linux/const.h
@@ -25,4 +25,9 @@
#define _BITUL(x) (_AC(1,UL) << (x))
#define _BITULL(x) (_AC(1,ULL) << (x))
+#define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
+#define __ALIGN_KERNEL_MASK(x, mask) (((x) + (mask)) & ~(mask))
+
+#define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
+
#endif /* !(_LINUX_CONST_H) */
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -14,7 +14,7 @@
#ifndef _UAPI_LINUX_ETHTOOL_H
#define _UAPI_LINUX_ETHTOOL_H
-#include <linux/kernel.h>
+#include <linux/const.h>
#include <linux/types.h>
#include <linux/if_ether.h>
--- a/include/uapi/linux/kernel.h
+++ b/include/uapi/linux/kernel.h
@@ -3,13 +3,6 @@
#define _UAPI_LINUX_KERNEL_H
#include <linux/sysinfo.h>
-
-/*
- * 'kernel.h' contains some often-used function prototypes etc
- */
-#define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
-#define __ALIGN_KERNEL_MASK(x, mask) (((x) + (mask)) & ~(mask))
-
-#define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
+#include <linux/const.h>
#endif /* _UAPI_LINUX_KERNEL_H */
--- a/include/uapi/linux/lightnvm.h
+++ b/include/uapi/linux/lightnvm.h
@@ -21,7 +21,7 @@
#define _UAPI_LINUX_LIGHTNVM_H
#ifdef __KERNEL__
-#include <linux/kernel.h>
+#include <linux/const.h>
#include <linux/ioctl.h>
#else /* __KERNEL__ */
#include <stdio.h>
--- a/include/uapi/linux/mroute6.h
+++ b/include/uapi/linux/mroute6.h
@@ -2,7 +2,7 @@
#ifndef _UAPI__LINUX_MROUTE6_H
#define _UAPI__LINUX_MROUTE6_H
-#include <linux/kernel.h>
+#include <linux/const.h>
#include <linux/types.h>
#include <linux/sockios.h>
#include <linux/in6.h> /* For struct sockaddr_in6. */
--- a/include/uapi/linux/netfilter/x_tables.h
+++ b/include/uapi/linux/netfilter/x_tables.h
@@ -1,7 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef _UAPI_X_TABLES_H
#define _UAPI_X_TABLES_H
-#include <linux/kernel.h>
+#include <linux/const.h>
#include <linux/types.h>
#define XT_FUNCTION_MAXNAMELEN 30
--- a/include/uapi/linux/netlink.h
+++ b/include/uapi/linux/netlink.h
@@ -2,7 +2,7 @@
#ifndef _UAPI__LINUX_NETLINK_H
#define _UAPI__LINUX_NETLINK_H
-#include <linux/kernel.h>
+#include <linux/const.h>
#include <linux/socket.h> /* for __kernel_sa_family_t */
#include <linux/types.h>
--- a/include/uapi/linux/sysctl.h
+++ b/include/uapi/linux/sysctl.h
@@ -23,7 +23,7 @@
#ifndef _UAPI_LINUX_SYSCTL_H
#define _UAPI_LINUX_SYSCTL_H
-#include <linux/kernel.h>
+#include <linux/const.h>
#include <linux/types.h>
#include <linux/compiler.h>
On Thu, 7 Jan 2021 at 20:00, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.14.214 release.
> There are 29 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 09 Jan 2021 14:30:35 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.214-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
Summary
------------------------------------------------------------------------
kernel: 4.14.214-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: 78e4e5e07ab0059bd4c96c117fb2a8e24bda7127
git describe: v4.14.213-30-g78e4e5e07ab0
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.213-30-g78e4e5e07ab0
No regressions (compared to build v4.14.213)
No fixes (compared to build v4.14.213)
Ran 40940 total tests in the following environments and test suites.
Environments
--------------
- arm
- arm64
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- mips
- qemu-arm64-kasan
- qemu-x86_64-kasan
- qemu_arm
- qemu_arm64
- qemu_arm64-compat
- qemu_i386
- qemu_x86_64
- qemu_x86_64-compat
- sparc
- x15 - arm
- x86_64
- x86-kasan
Test Suites
-----------
* build
* linux-log-parser
* igt-gpu-tools
* install-android-platform-tools-r2600
* kvm-unit-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-mm-tests
* ltp-sched-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* perf
* fwts
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-fs-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* network-basic-tests
* v4l2-compliance
* ltp-containers-tests
* ltp-open-posix-tests
* rcutorture
--
Linaro LKFT
https://lkft.linaro.org
On Thu, Jan 07, 2021 at 03:31:15PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.214 release.
> There are 29 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 09 Jan 2021 14:30:35 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 168 pass: 168 fail: 0
Qemu test results:
total: 404 pass: 404 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter