Make the indentions consistent with everywhere else in the kernel.
Signed-off-by: Enrico Weigelt, metux IT consult <[email protected]>
---
drivers/firmware/Kconfig | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 3f14dffb9669..490931b800ee 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -86,8 +86,8 @@ config EDD
BIOS tries boot from. This information is then exported via sysfs.
This option is experimental and is known to fail to boot on some
- obscure configurations. Most disk controller BIOS vendors do
- not yet implement this feature.
+ obscure configurations. Most disk controller BIOS vendors do
+ not yet implement this feature.
config EDD_OFF
bool "Sets default behavior for EDD detection to off"
@@ -99,14 +99,14 @@ config EDD_OFF
using the kernel parameter 'edd={on|skipmbr|off}'.
config FIRMWARE_MEMMAP
- bool "Add firmware-provided memory map to sysfs" if EXPERT
- default X86
- help
- Add the firmware-provided (unmodified) memory map to /sys/firmware/memmap.
- That memory map is used for example by kexec to set up parameter area
- for the next kernel, but can also be used for debugging purposes.
+ bool "Add firmware-provided memory map to sysfs" if EXPERT
+ default X86
+ help
+ Add the firmware-provided (unmodified) memory map to /sys/firmware/memmap.
+ That memory map is used for example by kexec to set up parameter area
+ for the next kernel, but can also be used for debugging purposes.
- See also Documentation/ABI/testing/sysfs-firmware-memmap.
+ See also Documentation/ABI/testing/sysfs-firmware-memmap.
config EFI_PCDP
bool "Console device selection via EFI PCDP or HCDP table"
@@ -133,9 +133,9 @@ config EFI_PCDP
<http://www.dig64.org/specifications/>
config DMIID
- bool "Export DMI identification via sysfs to userspace"
- depends on DMI
- default y
+ bool "Export DMI identification via sysfs to userspace"
+ depends on DMI
+ default y
help
Say Y here if you want to query SMBIOS/DMI system identification
information from userspace through /sys/class/dmi/id/ or if you want
@@ -170,7 +170,7 @@ config ISCSI_IBFT
select ISCSI_BOOT_SYSFS
select ISCSI_IBFT_FIND if X86
depends on ACPI && SCSI && SCSI_LOWLEVEL
- default n
+ default n
help
This option enables support for detection and exposing of iSCSI
Boot Firmware Table (iBFT) via sysfs to userspace. If you wish to
--
2.11.0
On 1/15/21 11:42 AM, Enrico Weigelt, metux IT consult wrote:
> Make the indentions consistent with everywhere else in the kernel.
>
> Signed-off-by: Enrico Weigelt, metux IT consult <[email protected]>
LGTM. Thanks.
But you need to send it To: or Cc: some maintainer(s).
They don't generally graze on lkml for patches.
Reviewed-by: Randy Dunlap <[email protected]>
> ---
> drivers/firmware/Kconfig | 26 +++++++++++++-------------
> 1 file changed, 13 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
> index 3f14dffb9669..490931b800ee 100644
> --- a/drivers/firmware/Kconfig
> +++ b/drivers/firmware/Kconfig
> @@ -86,8 +86,8 @@ config EDD
> BIOS tries boot from. This information is then exported via sysfs.
>
> This option is experimental and is known to fail to boot on some
> - obscure configurations. Most disk controller BIOS vendors do
> - not yet implement this feature.
> + obscure configurations. Most disk controller BIOS vendors do
> + not yet implement this feature.
>
> config EDD_OFF
> bool "Sets default behavior for EDD detection to off"
> @@ -99,14 +99,14 @@ config EDD_OFF
> using the kernel parameter 'edd={on|skipmbr|off}'.
>
> config FIRMWARE_MEMMAP
> - bool "Add firmware-provided memory map to sysfs" if EXPERT
> - default X86
> - help
> - Add the firmware-provided (unmodified) memory map to /sys/firmware/memmap.
> - That memory map is used for example by kexec to set up parameter area
> - for the next kernel, but can also be used for debugging purposes.
> + bool "Add firmware-provided memory map to sysfs" if EXPERT
> + default X86
> + help
> + Add the firmware-provided (unmodified) memory map to /sys/firmware/memmap.
> + That memory map is used for example by kexec to set up parameter area
> + for the next kernel, but can also be used for debugging purposes.
>
> - See also Documentation/ABI/testing/sysfs-firmware-memmap.
> + See also Documentation/ABI/testing/sysfs-firmware-memmap.
>
> config EFI_PCDP
> bool "Console device selection via EFI PCDP or HCDP table"
> @@ -133,9 +133,9 @@ config EFI_PCDP
> <http://www.dig64.org/specifications/>
>
> config DMIID
> - bool "Export DMI identification via sysfs to userspace"
> - depends on DMI
> - default y
> + bool "Export DMI identification via sysfs to userspace"
> + depends on DMI
> + default y
> help
> Say Y here if you want to query SMBIOS/DMI system identification
> information from userspace through /sys/class/dmi/id/ or if you want
> @@ -170,7 +170,7 @@ config ISCSI_IBFT
> select ISCSI_BOOT_SYSFS
> select ISCSI_IBFT_FIND if X86
> depends on ACPI && SCSI && SCSI_LOWLEVEL
> - default n
> + default n
> help
> This option enables support for detection and exposing of iSCSI
> Boot Firmware Table (iBFT) via sysfs to userspace. If you wish to
>
--
~Randy
You can't do anything without having to do something else first.
-- Belefant's Law