Correct compile issue if CONFIG_TTY is not set by
only adding ttyVK devices if CONFIG_BCM_VK_TTY is set.
Reported-by: Randy Dunlap <[email protected]>
Signed-off-by: Scott Branden <[email protected]>
---
Changes since v3:
- Kconfig cleanups below as per Greg's comments
- changed if BCM_VK to depends on BCM_VK
- removed default y in CONFIG_BCM_VK_TTY
- expanded decription of CONFIG_BCM_VK_TTY
Changes since v2:
- add CONFIG_BCM_VK_TTY
- add function and stub for bcm_vk_tty_set_irq_enabled
Changes since v1:
- add function stubs rather than compiling out code
---
drivers/misc/bcm-vk/Kconfig | 12 +++++++++
drivers/misc/bcm-vk/Makefile | 4 +--
drivers/misc/bcm-vk/bcm_vk.h | 42 +++++++++++++++++++++++++++++---
drivers/misc/bcm-vk/bcm_vk_dev.c | 5 ++--
drivers/misc/bcm-vk/bcm_vk_tty.c | 6 +++++
5 files changed, 61 insertions(+), 8 deletions(-)
diff --git a/drivers/misc/bcm-vk/Kconfig b/drivers/misc/bcm-vk/Kconfig
index 052f6f28b540..68a972772b99 100644
--- a/drivers/misc/bcm-vk/Kconfig
+++ b/drivers/misc/bcm-vk/Kconfig
@@ -15,3 +15,15 @@ config BCM_VK
accelerators via /dev/bcm-vk.N devices.
If unsure, say N.
+
+config BCM_VK_TTY
+ bool "Enable tty ports on a Broadcom VK Accelerator device"
+ depends on TTY
+ depends on BCM_VK
+ help
+ Select this option to enable tty support to allow console
+ access to Broadcom VK Accelerator cards from host.
+
+ Device node will in the form /dev/bcm-vk.x_ttyVKy where:
+ x is the instance of the VK card
+ y is the tty device number on the VK card.
diff --git a/drivers/misc/bcm-vk/Makefile b/drivers/misc/bcm-vk/Makefile
index e4a1486f7209..1df2ebe851ca 100644
--- a/drivers/misc/bcm-vk/Makefile
+++ b/drivers/misc/bcm-vk/Makefile
@@ -7,6 +7,6 @@ obj-$(CONFIG_BCM_VK) += bcm_vk.o
bcm_vk-objs := \
bcm_vk_dev.o \
bcm_vk_msg.o \
- bcm_vk_sg.o \
- bcm_vk_tty.o
+ bcm_vk_sg.o
+bcm_vk-$(CONFIG_BCM_VK_TTY) += bcm_vk_tty.o
diff --git a/drivers/misc/bcm-vk/bcm_vk.h b/drivers/misc/bcm-vk/bcm_vk.h
index 3f37c640a814..a1338f375589 100644
--- a/drivers/misc/bcm-vk/bcm_vk.h
+++ b/drivers/misc/bcm-vk/bcm_vk.h
@@ -258,7 +258,11 @@ enum pci_barno {
BAR_2
};
+#ifdef CONFIG_BCM_VK_TTY
#define BCM_VK_NUM_TTY 2
+#else
+#define BCM_VK_NUM_TTY 0
+#endif
struct bcm_vk_tty {
struct tty_port port;
@@ -366,11 +370,13 @@ struct bcm_vk {
struct miscdevice miscdev;
int devid; /* dev id allocated */
+#ifdef CONFIG_BCM_VK_TTY
struct tty_driver *tty_drv;
struct timer_list serial_timer;
struct bcm_vk_tty tty[BCM_VK_NUM_TTY];
struct workqueue_struct *tty_wq_thread;
struct work_struct tty_wq_work;
+#endif
/* Reference-counting to handle file operations */
struct kref kref;
@@ -501,13 +507,43 @@ int bcm_vk_send_shutdown_msg(struct bcm_vk *vk, u32 shut_type,
const pid_t pid, const u32 q_num);
void bcm_to_v_q_doorbell(struct bcm_vk *vk, u32 q_num, u32 db_val);
int bcm_vk_auto_load_all_images(struct bcm_vk *vk);
-int bcm_vk_tty_init(struct bcm_vk *vk, char *name);
-void bcm_vk_tty_exit(struct bcm_vk *vk);
-void bcm_vk_tty_terminate_tty_user(struct bcm_vk *vk);
void bcm_vk_hb_init(struct bcm_vk *vk);
void bcm_vk_hb_deinit(struct bcm_vk *vk);
void bcm_vk_handle_notf(struct bcm_vk *vk);
bool bcm_vk_drv_access_ok(struct bcm_vk *vk);
void bcm_vk_set_host_alert(struct bcm_vk *vk, u32 bit_mask);
+#ifdef CONFIG_BCM_VK_TTY
+int bcm_vk_tty_init(struct bcm_vk *vk, char *name);
+void bcm_vk_tty_exit(struct bcm_vk *vk);
+void bcm_vk_tty_terminate_tty_user(struct bcm_vk *vk);
+void bcm_vk_tty_wq_exit(struct bcm_vk *vk);
+
+static inline void bcm_vk_tty_set_irq_enabled(struct bcm_vk *vk, int index)
+{
+ vk->tty[index].irq_enabled = true;
+}
+#else
+static inline int bcm_vk_tty_init(struct bcm_vk *vk, char *name)
+{
+ return 0;
+}
+
+static inline void bcm_vk_tty_exit(struct bcm_vk *vk)
+{
+}
+
+static inline void bcm_vk_tty_terminate_tty_user(struct bcm_vk *vk)
+{
+}
+
+static inline void bcm_vk_tty_wq_exit(struct bcm_vk *vk)
+{
+}
+
+static inline void bcm_vk_tty_set_irq_enabled(struct bcm_vk *vk, int index)
+{
+}
+#endif /* CONFIG_BCM_VK_TTY */
+
#endif
diff --git a/drivers/misc/bcm-vk/bcm_vk_dev.c b/drivers/misc/bcm-vk/bcm_vk_dev.c
index c3d2bba68ef1..59b4859d68d2 100644
--- a/drivers/misc/bcm-vk/bcm_vk_dev.c
+++ b/drivers/misc/bcm-vk/bcm_vk_dev.c
@@ -1396,7 +1396,7 @@ static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
pdev->irq + vk->num_irqs, vk->num_irqs + 1);
goto err_irq;
}
- vk->tty[i].irq_enabled = true;
+ bcm_vk_tty_set_irq_enabled(vk, i);
}
id = ida_simple_get(&bcm_vk_ida, 0, 0, GFP_KERNEL);
@@ -1580,8 +1580,7 @@ static void bcm_vk_remove(struct pci_dev *pdev)
cancel_work_sync(&vk->wq_work);
destroy_workqueue(vk->wq_thread);
- cancel_work_sync(&vk->tty_wq_work);
- destroy_workqueue(vk->tty_wq_thread);
+ bcm_vk_tty_wq_exit(vk);
for (i = 0; i < MAX_BAR; i++) {
if (vk->bar[i])
diff --git a/drivers/misc/bcm-vk/bcm_vk_tty.c b/drivers/misc/bcm-vk/bcm_vk_tty.c
index be3964949b63..4d02692ecfc7 100644
--- a/drivers/misc/bcm-vk/bcm_vk_tty.c
+++ b/drivers/misc/bcm-vk/bcm_vk_tty.c
@@ -331,3 +331,9 @@ void bcm_vk_tty_terminate_tty_user(struct bcm_vk *vk)
kill_pid(find_vpid(vktty->pid), SIGKILL, 1);
}
}
+
+void bcm_vk_tty_wq_exit(struct bcm_vk *vk)
+{
+ cancel_work_sync(&vk->tty_wq_work);
+ destroy_workqueue(vk->tty_wq_thread);
+}
--
2.17.1
On Wed, Feb 03, 2021 at 01:04:51PM -0800, Scott Branden wrote:
> Correct compile issue if CONFIG_TTY is not set by
> only adding ttyVK devices if CONFIG_BCM_VK_TTY is set.
>
> Reported-by: Randy Dunlap <[email protected]>
> Signed-off-by: Scott Branden <[email protected]>
>
> ---
> Changes since v3:
Is this "v4"? Your subject line doesn't say so :(
On 2021-02-03 2:17 p.m., Greg Kroah-Hartman wrote:
> On Wed, Feb 03, 2021 at 01:04:51PM -0800, Scott Branden wrote:
>> Correct compile issue if CONFIG_TTY is not set by
>> only adding ttyVK devices if CONFIG_BCM_VK_TTY is set.
>>
>> Reported-by: Randy Dunlap <[email protected]>
>> Signed-off-by: Scott Branden <[email protected]>
>>
>> ---
>> Changes since v3:
> Is this "v4"? Your subject line doesn't say so :(
Yes, a mistake. Sent same patch with PATCH v4 on subject line now.
>