This patch series adds support for the Kontron pITX-imx8m board:
https://www.kontron.com/products/boards-and-standard-form-factors/single-board-computer/pitx-imx8m.html
Heiko Thiery (2):
dt-bindings: arm: fsl: add Kontron pITX-imx8m board
arm64: dts: fsl: add support for Kontron pitx-imx8m board
.../devicetree/bindings/arm/fsl.yaml | 1 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../freescale/imx8mq-kontron-pitx-imx8m.dts | 675 ++++++++++++++++++
3 files changed, 677 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
--
2.30.0
The Kontron pitx-imx8m board is based on an i.MX8MQ soc.
Signed-off-by: Heiko Thiery <[email protected]>
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../freescale/imx8mq-kontron-pitx-imx8m.dts | 675 ++++++++++++++++++
2 files changed, 676 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 6438db3822f8..9fc2c6f64407 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -47,6 +47,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-kontron-pitx-imx8m.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
new file mode 100644
index 000000000000..79805928204e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
@@ -0,0 +1,675 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree File for the Kontron pitx-imx8m board.
+ *
+ * Copyright (C) 2021 Heiko Thiery <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "imx8mq.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+ model = "Kontron pITX-imx8m";
+ compatible = "kontron,pitx-imx8m", "fsl,imx8mq";
+
+ aliases {
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ spi0 = &qspi0;
+ spi1 = &ecspi2;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usdhc2_vmmc: regulator-v-3v3-sd {
+ compatible = "regulator-fixed";
+ regulator-name = "V_3V3_SD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ off-on-delay-us = <20000>;
+ enable-active-high;
+ };
+ };
+
+ usb_hub_reset: usb-hub-reset {
+ compatible = "gpio-reset";
+ reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <3000>;
+ reset-post-delay-ms = <50>;
+ #reset-cells = <0>;
+ };
+
+ tpm_reset: tpm-reset {
+ compatible = "gpio-reset";
+ reset-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <2>;
+ reset-post-delay-ms = <60>;
+ #reset-cells = <0>;
+ };
+
+ pcie0_refclk: pcie0-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
+ pcie1_refclk: pcie1-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ pciewake {
+ label = "PCIE_Wake";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ linux,input-type = <4>; /* EV_MSC */
+ linux,code = <3>; /* MSC_RAW */
+ gpio-key,wakeup;
+ };
+ };
+};
+
+&ecspi2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ slb9670@0 {
+ compatible = "infineon,slb9670";
+ reg = <0>;
+ resets = <&tpm_reset>;
+ spi-max-frequency = <43000000>;
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ phy-reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic@8 {
+ compatible = "fsl,pfuze100";
+ fsl,pfuze-support-disable-sw;
+ reg = <0x8>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-name = "V_0V9_GPU";
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-name = "V_0V9_VPU";
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-name = "V_1V1_NVCC_DRAM";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3ab {
+ regulator-name = "V_1V0_DRAM";
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-name = "V_1V8_S0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-name = "V_0V9_SNVS";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-name = "V_0V55_VREF_DDR";
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-name = "V_1V5_CSI";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-name = "V_0V9_PHY";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <975000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-name = "V_1V8_PHY";
+ regulator-min-microvolt = <1675000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-name = "V_1V8_VDDA";
+ regulator-min-microvolt = <1625000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-name = "V_3V3_PHY";
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3625000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-name = "V_2V8_CAM";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ max6650@1b {
+ compatible = "maxim,max6650";
+ reg = <0x1b>;
+ maxim,fan-microvolt = <5000000>;
+ };
+
+ rtc@32 {
+ compatible = "microcrystal,rv8803";
+ reg = <0x32>;
+ };
+
+ lm75@4b {
+ compatible = "national,lm75b";
+ reg = <0x4b>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ wm8904: audio-codec@1a {
+ compatible = "wlf,wm8904";
+ reg = <0x1a>;
+ clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+ clock-names = "mclk";
+ clock-frequency = <24000000>;
+ };
+};
+
+/* M.2 B-key slot */
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0>;
+ disable-gpio = <&gpio5 29 GPIO_ACTIVE_LOW>;
+ reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+ <&clk IMX8MQ_CLK_PCIE1_AUX>,
+ <&clk IMX8MQ_CLK_PCIE1_PHY>,
+ <&pcie0_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+ ext_osc = <1>;
+ status = "okay";
+};
+
+/* Intel Ethernet Controller I210/I211 */
+&pcie1 {
+ clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+ <&clk IMX8MQ_CLK_PCIE2_AUX>,
+ <&clk IMX8MQ_CLK_PCIE2_PHY>,
+ <&pcie1_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+ ext_osc = <1>;
+ fsl,max-link-speed = <1>;
+ status = "okay";
+};
+
+&pgc_gpu {
+ power-supply = <&sw1a_reg>;
+};
+
+&pgc_vpu {
+ power-supply = <&sw1c_reg>;
+};
+
+&qspi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ fsl,uart-has-rtscts;
+ assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ maximum-speed = "high-speed";
+ status = "okay";
+};
+
+&usb3_phy0 {
+ status = "okay";
+};
+
+&usb_dwc3_1 {
+ resets = <&usb_hub_reset>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb3_phy1 {
+ status = "okay";
+};
+
+&usdhc1 {
+ assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+ assigned-clock-rates = <400000000>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ vqmmc-supply = <&sw4_reg>;
+ bus-width = <8>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ status = "okay";
+};
+
+&usdhc2 {
+ assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+ assigned-clock-rates = <200000000>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 /* TPM Reset */
+ MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19 /* USB2 Hub Reset */
+ >;
+ };
+
+ pinctrl_gpio: gpiogrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 /* GPIO0 */
+ MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19 /* GPIO1 */
+ MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17 0x19 /* GPIO2 */
+ MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18 0x19 /* GPIO3 */
+ MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 /* GPIO4 */
+ MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x19 /* GPIO5 */
+ MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x19 /* GPIO6 */
+ MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x19 /* GPIO7 */
+ >;
+ };
+
+ pinctrl_pcie0: pcie0grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x16 /* PCIE_PERST */
+ MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29 0x16 /* W_DISABLE */
+ >;
+ };
+
+ pinctrl_gpio_keys: gpio-keysgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x16 /* PCIE_WAKE */
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23
+ MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x16
+ MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x16
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
+ MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f
+ MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f
+ MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_qspi: qspigrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82
+ MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82
+ MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82
+ MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
+ MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
+ MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
+
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x19
+ MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x19
+ MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x19
+ >;
+ };
+
+ pinctrl_ecspi2_cs: ecspi2cs {
+ fsl,pins = <
+ MX8MQ_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49
+ MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49
+ MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49
+ MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49
+ MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x49
+ MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x49
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3
+ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd
+ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf
+ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41
+ MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
+ MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x19
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
+ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd
+ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xdf
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xdf
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xdf
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xdf
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xdf
+ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usb0: usb0grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x19
+ MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x19
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6
+ MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6
+ MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6
+ MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6
+ MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6
+ >;
+ };
+
+ pinctrl_spdif1: spdif1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SPDIF_TX_SPDIF1_OUT 0xd6
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+ >;
+ };
+};
--
2.30.0
Am 2021-02-18 13:33, schrieb Heiko Thiery:
> The Kontron pitx-imx8m board is based on an i.MX8MQ soc.
>
> Signed-off-by: Heiko Thiery <[email protected]>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../freescale/imx8mq-kontron-pitx-imx8m.dts | 675 ++++++++++++++++++
> 2 files changed, 676 insertions(+)
> create mode 100644
> arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile
> b/arch/arm64/boot/dts/freescale/Makefile
> index 6438db3822f8..9fc2c6f64407 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -47,6 +47,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mq-kontron-pitx-imx8m.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb
> diff --git
> a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> new file mode 100644
> index 000000000000..79805928204e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> @@ -0,0 +1,675 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree File for the Kontron pitx-imx8m board.
> + *
> + * Copyright (C) 2021 Heiko Thiery <[email protected]>
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mq.dtsi"
> +#include <dt-bindings/net/ti-dp83867.h>
> +
> +/ {
> + model = "Kontron pITX-imx8m";
> + compatible = "kontron,pitx-imx8m", "fsl,imx8mq";
> +
> + aliases {
> + i2c0 = &i2c1;
> + i2c1 = &i2c2;
> + i2c2 = &i2c3;
> + mmc0 = &usdhc1;
> + mmc1 = &usdhc2;
> + serial0 = &uart1;
> + serial1 = &uart2;
> + serial2 = &uart3;
> + spi0 = &qspi0;
> + spi1 = &ecspi2;
> + };
> +
> + chosen {
> + stdout-path = "serial2:115200n8";
> + };
> +
> + regulators {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg_usdhc2_vmmc: regulator-v-3v3-sd {
> + compatible = "regulator-fixed";
> + regulator-name = "V_3V3_SD";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> + off-on-delay-us = <20000>;
> + enable-active-high;
> + };
> + };
> +
> + usb_hub_reset: usb-hub-reset {
> + compatible = "gpio-reset";
> + reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
> + reset-delay-us = <3000>;
> + reset-post-delay-ms = <50>;
> + #reset-cells = <0>;
> + };
> +
> + tpm_reset: tpm-reset {
> + compatible = "gpio-reset";
> + reset-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
> + reset-delay-us = <2>;
> + reset-post-delay-ms = <60>;
> + #reset-cells = <0>;
> + };
> +
> + pcie0_refclk: pcie0-refclk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <100000000>;
> + };
> +
> + pcie1_refclk: pcie1-refclk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <100000000>;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpio_keys>;
> +
> + pciewake {
> + label = "PCIE_Wake";
This looks odd, is this the PCIE_WAKE# signal? Is this the way
it is usually handled in linux?
> + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
> + linux,input-type = <4>; /* EV_MSC */
> + linux,code = <3>; /* MSC_RAW */
> + gpio-key,wakeup;
> + };
> + };
> +};
> +
> +&ecspi2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
> + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
> + status = "okay";
> +
> + slb9670@0 {
> + compatible = "infineon,slb9670";
> + reg = <0>;
> + resets = <&tpm_reset>;
> + spi-max-frequency = <43000000>;
> + };
> +};
> +
> +&fec1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec1>;
> + phy-mode = "rgmii-id";
> + phy-handle = <ðphy0>;
> + phy-reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
> + fsl,magic-packet;
> + status = "okay";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy0: ethernet-phy@0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0>;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
> + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
> + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> + };
> + };
> +};
> +
> +&i2c1 {
> + clock-frequency = <400000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "okay";
> +
> + pmic@8 {
> + compatible = "fsl,pfuze100";
> + fsl,pfuze-support-disable-sw;
> + reg = <0x8>;
> +
> + regulators {
> + sw1a_reg: sw1ab {
> + regulator-name = "V_0V9_GPU";
> + regulator-min-microvolt = <825000>;
> + regulator-max-microvolt = <1100000>;
> + };
> +
> + sw1c_reg: sw1c {
> + regulator-name = "V_0V9_VPU";
> + regulator-min-microvolt = <825000>;
> + regulator-max-microvolt = <1100000>;
> + };
> +
> + sw2_reg: sw2 {
> + regulator-name = "V_1V1_NVCC_DRAM";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-always-on;
> + };
> +
> + sw3a_reg: sw3ab {
> + regulator-name = "V_1V0_DRAM";
> + regulator-min-microvolt = <825000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-always-on;
> + };
> +
> + sw4_reg: sw4 {
> + regulator-name = "V_1V8_S0";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + swbst_reg: swbst {
No name?
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5150000>;
> + };
> +
> + snvs_reg: vsnvs {
> + regulator-name = "V_0V9_SNVS";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + };
> +
> + vref_reg: vrefddr {
> + regulator-name = "V_0V55_VREF_DDR";
> + regulator-always-on;
> + };
> +
> + vgen1_reg: vgen1 {
> + regulator-name = "V_1V5_CSI";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + };
> +
> + vgen2_reg: vgen2 {
> + regulator-name = "V_0V9_PHY";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <975000>;
> + regulator-always-on;
> + };
> +
> + vgen3_reg: vgen3 {
> + regulator-name = "V_1V8_PHY";
> + regulator-min-microvolt = <1675000>;
> + regulator-max-microvolt = <1975000>;
> + regulator-always-on;
> + };
> +
> + vgen4_reg: vgen4 {
> + regulator-name = "V_1V8_VDDA";
> + regulator-min-microvolt = <1625000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-always-on;
> + };
> +
> + vgen5_reg: vgen5 {
> + regulator-name = "V_3V3_PHY";
> + regulator-min-microvolt = <3075000>;
> + regulator-max-microvolt = <3625000>;
> + regulator-always-on;
> + };
> +
> + vgen6_reg: vgen6 {
> + regulator-name = "V_2V8_CAM";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> + };
> + };
> +
> + max6650@1b {
> + compatible = "maxim,max6650";
> + reg = <0x1b>;
> + maxim,fan-microvolt = <5000000>;
> + };
> +
> + rtc@32 {
> + compatible = "microcrystal,rv8803";
> + reg = <0x32>;
> + };
> +
> + lm75@4b {
> + compatible = "national,lm75b";
> + reg = <0x4b>;
> + };
> +
> + eeprom@51 {
> + compatible = "atmel,24c32";
> + reg = <0x51>;
> + pagesize = <32>;
> + };
> +};
> +
> +&i2c2 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +};
> +
> +&i2c3 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c3>;
> + status = "okay";
> +
> + wm8904: audio-codec@1a {
> + compatible = "wlf,wm8904";
> + reg = <0x1a>;
> + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
> + clock-names = "mclk";
> + clock-frequency = <24000000>;
> + };
Looks like this audio codec is not used at all.
> +};
> +
> +/* M.2 B-key slot */
> +&pcie0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcie0>;
> + disable-gpio = <&gpio5 29 GPIO_ACTIVE_LOW>;
> + reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
> + clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
> + <&clk IMX8MQ_CLK_PCIE1_AUX>,
> + <&clk IMX8MQ_CLK_PCIE1_PHY>,
> + <&pcie0_refclk>;
> + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> + ext_osc = <1>;
> + status = "okay";
> +};
> +
> +/* Intel Ethernet Controller I210/I211 */
> +&pcie1 {
> + clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
> + <&clk IMX8MQ_CLK_PCIE2_AUX>,
> + <&clk IMX8MQ_CLK_PCIE2_PHY>,
> + <&pcie1_refclk>;
> + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> + ext_osc = <1>;
> + fsl,max-link-speed = <1>;
> + status = "okay";
> +};
> +
> +&pgc_gpu {
> + power-supply = <&sw1a_reg>;
> +};
> +
> +&pgc_vpu {
> + power-supply = <&sw1c_reg>;
> +};
> +
> +&qspi0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_qspi>;
> + status = "okay";
> +
> + flash@0 {
> + compatible = "jedec,spi-nor";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0>;
> + spi-tx-bus-width = <4>;
> + spi-rx-bus-width = <4>;
> + m25p,fast-read;
> + spi-max-frequency = <50000000>;
> + };
> +};
> +
> +&snvs_pwrkey {
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
> + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
> + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
> + status = "okay";
> +};
> +
> +&uart3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart3>;
> + fsl,uart-has-rtscts;
> + assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
> + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
> + status = "okay";
> +};
> +
> +&usb_dwc3_0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usb0>;
> + dr_mode = "otg";
> + hnp-disable;
> + srp-disable;
> + adp-disable;
> + maximum-speed = "high-speed";
> + status = "okay";
> +};
> +
> +&usb3_phy0 {
for arm64 boards the references are normally sorted
alphabetically. Anyway, since this is only usb2.0 do you need
this at all?
> + status = "okay";
> +};
> +
> +&usb_dwc3_1 {
> + resets = <&usb_hub_reset>;
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +&usb3_phy1 {
> + status = "okay";
> +};
> +
> +&usdhc1 {
> + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
> + assigned-clock-rates = <400000000>;
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> + vqmmc-supply = <&sw4_reg>;
> + bus-width = <8>;
> + non-removable;
> + no-sd;
> + no-sdio;
> + status = "okay";
> +};
> +
> +&usdhc2 {
> + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
> + assigned-clock-rates = <200000000>;
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
> + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
> + bus-width = <4>;
> + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> + wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
> + vmmc-supply = <®_usdhc2_vmmc>;
> + status = "okay";
> +};
> +
> +&wdog1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdog>;
> + fsl,ext-reset-output;
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
> +
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 /* TPM Reset */
> + MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19 /* USB2 Hub Reset */
> + >;
> + };
> +
> + pinctrl_gpio: gpiogrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 /* GPIO0 */
> + MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19 /* GPIO1 */
> + MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17 0x19 /* GPIO2 */
> + MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18 0x19 /* GPIO3 */
> + MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 /* GPIO4 */
> + MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x19 /* GPIO5 */
> + MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x19 /* GPIO6 */
> + MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x19 /* GPIO7 */
> + >;
> + };
> +
> + pinctrl_pcie0: pcie0grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x16 /* PCIE_PERST */
> + MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29 0x16 /* W_DISABLE */
> + >;
> + };
> +
> + pinctrl_gpio_keys: gpio-keysgrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x16 /* PCIE_WAKE */
> + >;
> + };
> +
> + pinctrl_fec1: fec1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
> + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23
> + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
> + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
> + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
> + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
> + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
> + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
> + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
> + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
> + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
> + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
> + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
> + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
> + MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x16
> + MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x16
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
> + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f
> + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f
> + >;
> + };
> +
> + pinctrl_i2c3: i2c3grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f
> + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f
> + >;
> + };
> +
> + pinctrl_qspi: qspigrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82
> + MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82
> + MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82
> + MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
> + MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
> + MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
> +
> + >;
> + };
> +
> + pinctrl_ecspi2: ecspi2grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x19
> + MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x19
> + MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x19
> + >;
> + };
> +
> + pinctrl_ecspi2_cs: ecspi2cs {
> + fsl,pins = <
> + MX8MQ_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19
> + >;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49
> + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49
> + >;
> + };
> +
> + pinctrl_uart2: uart2grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49
> + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49
> + >;
> + };
> +
> + pinctrl_uart3: uart3grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49
> + MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49
> + MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x49
> + MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x49
> + >;
> + };
> +
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
> + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3
> + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3
> + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3
> + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3
> + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3
> + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3
> + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3
> + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3
> + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3
> + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83
> + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc1_100mhz: usdhc1-100grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d
> + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd
> + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd
> + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd
> + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd
> + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd
> + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd
> + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd
> + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd
> + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd
> + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d
> + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc1_200mhz: usdhc1-200grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f
> + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf
> + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf
> + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf
> + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf
> + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf
> + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf
> + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf
> + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf
> + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf
> + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f
> + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc2_gpio: usdhc2gpiogrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41
> + MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
> + MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x19
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83
> + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3
> + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
> + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
> + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
> + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
> + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc2_100mhz: usdhc2-100grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d
> + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd
> + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd
> + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd
> + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd
> + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd
> + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc2_200mhz: usdhc2-200grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f
> + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xdf
> + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xdf
> + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xdf
> + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xdf
> + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xdf
> + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
> + >;
> + };
> +
> + pinctrl_usb0: usb0grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x19
> + MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x19
> + >;
> + };
> +
> + pinctrl_sai2: sai2grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6
> + MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6
> + MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6
> + MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6
> + MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6
> + >;
> + };
> +
> + pinctrl_spdif1: spdif1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_SPDIF_TX_SPDIF1_OUT 0xd6
> + >;
> + };
> +
> + pinctrl_wdog: wdoggrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
> + >;
> + };
> +};
--
-michael
Hi Michael et all,
Am Do., 18. Feb. 2021 um 13:50 Uhr schrieb Michael Walle <[email protected]>:
>
> Am 2021-02-18 13:33, schrieb Heiko Thiery:
> > The Kontron pitx-imx8m board is based on an i.MX8MQ soc.
> >
> > Signed-off-by: Heiko Thiery <[email protected]>
> > ---
> > arch/arm64/boot/dts/freescale/Makefile | 1 +
> > .../freescale/imx8mq-kontron-pitx-imx8m.dts | 675 ++++++++++++++++++
> > 2 files changed, 676 insertions(+)
> > create mode 100644
> > arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> >
> > diff --git a/arch/arm64/boot/dts/freescale/Makefile
> > b/arch/arm64/boot/dts/freescale/Makefile
> > index 6438db3822f8..9fc2c6f64407 100644
> > --- a/arch/arm64/boot/dts/freescale/Makefile
> > +++ b/arch/arm64/boot/dts/freescale/Makefile
> > @@ -47,6 +47,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
> > +dtb-$(CONFIG_ARCH_MXC) += imx8mq-kontron-pitx-imx8m.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb
> > diff --git
> > a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> > b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> > new file mode 100644
> > index 000000000000..79805928204e
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> > @@ -0,0 +1,675 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Device Tree File for the Kontron pitx-imx8m board.
> > + *
> > + * Copyright (C) 2021 Heiko Thiery <[email protected]>
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "imx8mq.dtsi"
> > +#include <dt-bindings/net/ti-dp83867.h>
> > +
> > +/ {
> > + model = "Kontron pITX-imx8m";
> > + compatible = "kontron,pitx-imx8m", "fsl,imx8mq";
> > +
> > + aliases {
> > + i2c0 = &i2c1;
> > + i2c1 = &i2c2;
> > + i2c2 = &i2c3;
> > + mmc0 = &usdhc1;
> > + mmc1 = &usdhc2;
> > + serial0 = &uart1;
> > + serial1 = &uart2;
> > + serial2 = &uart3;
> > + spi0 = &qspi0;
> > + spi1 = &ecspi2;
> > + };
> > +
> > + chosen {
> > + stdout-path = "serial2:115200n8";
> > + };
> > +
> > + regulators {
> > + compatible = "simple-bus";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + reg_usdhc2_vmmc: regulator-v-3v3-sd {
> > + compatible = "regulator-fixed";
> > + regulator-name = "V_3V3_SD";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> > + off-on-delay-us = <20000>;
> > + enable-active-high;
> > + };
> > + };
> > +
> > + usb_hub_reset: usb-hub-reset {
> > + compatible = "gpio-reset";
> > + reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
> > + reset-delay-us = <3000>;
> > + reset-post-delay-ms = <50>;
> > + #reset-cells = <0>;
> > + };
> > +
> > + tpm_reset: tpm-reset {
> > + compatible = "gpio-reset";
> > + reset-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
> > + reset-delay-us = <2>;
> > + reset-post-delay-ms = <60>;
> > + #reset-cells = <0>;
> > + };
> > +
> > + pcie0_refclk: pcie0-refclk {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <100000000>;
> > + };
> > +
> > + pcie1_refclk: pcie1-refclk {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <100000000>;
> > + };
> > +
> > + gpio-keys {
> > + compatible = "gpio-keys";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_gpio_keys>;
> > +
> > + pciewake {
> > + label = "PCIE_Wake";
>
> This looks odd, is this the PCIE_WAKE# signal? Is this the way
> it is usually handled in linux?
>
> > + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
> > + linux,input-type = <4>; /* EV_MSC */
> > + linux,code = <3>; /* MSC_RAW */
> > + gpio-key,wakeup;
> > + };
> > + };
> > +};
> > +
> > +&ecspi2 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
> > + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
> > + status = "okay";
> > +
> > + slb9670@0 {
> > + compatible = "infineon,slb9670";
> > + reg = <0>;
> > + resets = <&tpm_reset>;
> > + spi-max-frequency = <43000000>;
> > + };
> > +};
> > +
> > +&fec1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_fec1>;
> > + phy-mode = "rgmii-id";
> > + phy-handle = <ðphy0>;
> > + phy-reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
> > + fsl,magic-packet;
> > + status = "okay";
> > +
> > + mdio {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + ethphy0: ethernet-phy@0 {
> > + compatible = "ethernet-phy-ieee802.3-c22";
> > + reg = <0>;
> > + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
> > + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
> > + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> > + };
> > + };
> > +};
> > +
> > +&i2c1 {
> > + clock-frequency = <400000>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c1>;
> > + status = "okay";
> > +
> > + pmic@8 {
> > + compatible = "fsl,pfuze100";
> > + fsl,pfuze-support-disable-sw;
> > + reg = <0x8>;
> > +
> > + regulators {
> > + sw1a_reg: sw1ab {
> > + regulator-name = "V_0V9_GPU";
> > + regulator-min-microvolt = <825000>;
> > + regulator-max-microvolt = <1100000>;
> > + };
> > +
> > + sw1c_reg: sw1c {
> > + regulator-name = "V_0V9_VPU";
> > + regulator-min-microvolt = <825000>;
> > + regulator-max-microvolt = <1100000>;
> > + };
> > +
> > + sw2_reg: sw2 {
> > + regulator-name = "V_1V1_NVCC_DRAM";
> > + regulator-min-microvolt = <1100000>;
> > + regulator-max-microvolt = <1100000>;
> > + regulator-always-on;
> > + };
> > +
> > + sw3a_reg: sw3ab {
> > + regulator-name = "V_1V0_DRAM";
> > + regulator-min-microvolt = <825000>;
> > + regulator-max-microvolt = <1100000>;
> > + regulator-always-on;
> > + };
> > +
> > + sw4_reg: sw4 {
> > + regulator-name = "V_1V8_S0";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-always-on;
> > + };
> > +
> > + swbst_reg: swbst {
> No name?
This regulator is not used on the board. Shall I set the name to 'NC'
or is there a way to completely disable this one?
>
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5150000>;
> > + };
> > +
> > + snvs_reg: vsnvs {
> > + regulator-name = "V_0V9_SNVS";
> > + regulator-min-microvolt = <1000000>;
> > + regulator-max-microvolt = <3000000>;
> > + regulator-always-on;
> > + };
> > +
> > + vref_reg: vrefddr {
> > + regulator-name = "V_0V55_VREF_DDR";
> > + regulator-always-on;
> > + };
> > +
> > + vgen1_reg: vgen1 {
> > + regulator-name = "V_1V5_CSI";
> > + regulator-min-microvolt = <800000>;
> > + regulator-max-microvolt = <1550000>;
> > + };
> > +
> > + vgen2_reg: vgen2 {
> > + regulator-name = "V_0V9_PHY";
> > + regulator-min-microvolt = <850000>;
> > + regulator-max-microvolt = <975000>;
> > + regulator-always-on;
> > + };
> > +
> > + vgen3_reg: vgen3 {
> > + regulator-name = "V_1V8_PHY";
> > + regulator-min-microvolt = <1675000>;
> > + regulator-max-microvolt = <1975000>;
> > + regulator-always-on;
> > + };
> > +
> > + vgen4_reg: vgen4 {
> > + regulator-name = "V_1V8_VDDA";
> > + regulator-min-microvolt = <1625000>;
> > + regulator-max-microvolt = <1875000>;
> > + regulator-always-on;
> > + };
> > +
> > + vgen5_reg: vgen5 {
> > + regulator-name = "V_3V3_PHY";
> > + regulator-min-microvolt = <3075000>;
> > + regulator-max-microvolt = <3625000>;
> > + regulator-always-on;
> > + };
> > +
> > + vgen6_reg: vgen6 {
> > + regulator-name = "V_2V8_CAM";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-always-on;
> > + };
> > + };
> > + };
> > +
> > + max6650@1b {
> > + compatible = "maxim,max6650";
> > + reg = <0x1b>;
> > + maxim,fan-microvolt = <5000000>;
> > + };
> > +
> > + rtc@32 {
> > + compatible = "microcrystal,rv8803";
> > + reg = <0x32>;
> > + };
> > +
> > + lm75@4b {
> > + compatible = "national,lm75b";
> > + reg = <0x4b>;
> > + };
> > +
> > + eeprom@51 {
> > + compatible = "atmel,24c32";
> > + reg = <0x51>;
> > + pagesize = <32>;
> > + };
> > +};
> > +
> > +&i2c2 {
> > + clock-frequency = <100000>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c2>;
> > + status = "okay";
> > +};
> > +
> > +&i2c3 {
> > + clock-frequency = <100000>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c3>;
> > + status = "okay";
> > +
> > + wm8904: audio-codec@1a {
> > + compatible = "wlf,wm8904";
> > + reg = <0x1a>;
> > + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
> > + clock-names = "mclk";
> > + clock-frequency = <24000000>;
> > + };
>
> Looks like this audio codec is not used at all.
The codec is not used yet in the dtb. As I saw on an other board
(imx8mn-var-som.dtsi) there was also just a placeholder. I can also
add an comment here.
>
> > +};
> > +
> > +/* M.2 B-key slot */
> > +&pcie0 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_pcie0>;
> > + disable-gpio = <&gpio5 29 GPIO_ACTIVE_LOW>;
> > + reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
> > + clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
> > + <&clk IMX8MQ_CLK_PCIE1_AUX>,
> > + <&clk IMX8MQ_CLK_PCIE1_PHY>,
> > + <&pcie0_refclk>;
> > + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> > + ext_osc = <1>;
> > + status = "okay";
> > +};
> > +
> > +/* Intel Ethernet Controller I210/I211 */
> > +&pcie1 {
> > + clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
> > + <&clk IMX8MQ_CLK_PCIE2_AUX>,
> > + <&clk IMX8MQ_CLK_PCIE2_PHY>,
> > + <&pcie1_refclk>;
> > + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> > + ext_osc = <1>;
> > + fsl,max-link-speed = <1>;
> > + status = "okay";
> > +};
> > +
> > +&pgc_gpu {
> > + power-supply = <&sw1a_reg>;
> > +};
> > +
> > +&pgc_vpu {
> > + power-supply = <&sw1c_reg>;
> > +};
> > +
> > +&qspi0 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_qspi>;
> > + status = "okay";
> > +
> > + flash@0 {
> > + compatible = "jedec,spi-nor";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + reg = <0>;
> > + spi-tx-bus-width = <4>;
> > + spi-rx-bus-width = <4>;
> > + m25p,fast-read;
> > + spi-max-frequency = <50000000>;
> > + };
> > +};
> > +
> > +&snvs_pwrkey {
> > + status = "okay";
> > +};
> > +
> > +&uart1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_uart1>;
> > + assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
> > + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
> > + status = "okay";
> > +};
> > +
> > +&uart2 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_uart2>;
> > + assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
> > + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
> > + status = "okay";
> > +};
> > +
> > +&uart3 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_uart3>;
> > + fsl,uart-has-rtscts;
> > + assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
> > + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
> > + status = "okay";
> > +};
> > +
> > +&usb_dwc3_0 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_usb0>;
> > + dr_mode = "otg";
> > + hnp-disable;
> > + srp-disable;
> > + adp-disable;
> > + maximum-speed = "high-speed";
> > + status = "okay";
> > +};
> > +
> > +&usb3_phy0 {
>
> for arm64 boards the references are normally sorted
> alphabetically. Anyway, since this is only usb2.0 do you need
> this at all?
About the order I did not checked correctly. I can bring this in the
right order for sure. But about the needs I hope someone from e.g.
from NXP can give a hint.
>
> > + status = "okay";
> > +};
> > +
> > +&usb_dwc3_1 {
> > + resets = <&usb_hub_reset>;
> > + dr_mode = "host";
> > + status = "okay";
> > +};
> > +
> > +&usb3_phy1 {
> > + status = "okay";
> > +};
> > +
> > +&usdhc1 {
> > + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
> > + assigned-clock-rates = <400000000>;
> > + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> > + pinctrl-0 = <&pinctrl_usdhc1>;
> > + pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> > + pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> > + vqmmc-supply = <&sw4_reg>;
> > + bus-width = <8>;
> > + non-removable;
> > + no-sd;
> > + no-sdio;
> > + status = "okay";
> > +};
> > +
> > +&usdhc2 {
> > + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
> > + assigned-clock-rates = <200000000>;
> > + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> > + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> > + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
> > + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
> > + bus-width = <4>;
> > + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> > + wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
> > + vmmc-supply = <®_usdhc2_vmmc>;
> > + status = "okay";
> > +};
> > +
> > +&wdog1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_wdog>;
> > + fsl,ext-reset-output;
> > + status = "okay";
> > +};
> > +
> > +&iomuxc {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_hog>;
> > +
> > + pinctrl_hog: hoggrp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 /* TPM Reset */
> > + MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19 /* USB2 Hub Reset */
> > + >;
> > + };
> > +
> > + pinctrl_gpio: gpiogrp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 /* GPIO0 */
> > + MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19 /* GPIO1 */
> > + MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17 0x19 /* GPIO2 */
> > + MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18 0x19 /* GPIO3 */
> > + MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 /* GPIO4 */
> > + MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x19 /* GPIO5 */
> > + MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x19 /* GPIO6 */
> > + MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x19 /* GPIO7 */
> > + >;
> > + };
> > +
> > + pinctrl_pcie0: pcie0grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x16 /* PCIE_PERST */
> > + MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29 0x16 /* W_DISABLE */
> > + >;
> > + };
> > +
> > + pinctrl_gpio_keys: gpio-keysgrp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x16 /* PCIE_WAKE */
> > + >;
> > + };
> > +
> > + pinctrl_fec1: fec1grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
> > + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23
> > + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
> > + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
> > + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
> > + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
> > + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
> > + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
> > + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
> > + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
> > + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
> > + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
> > + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
> > + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
> > + MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x16
> > + MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x16
> > + >;
> > + };
> > +
> > + pinctrl_i2c1: i2c1grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
> > + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
> > + >;
> > + };
> > +
> > + pinctrl_i2c2: i2c2grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f
> > + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f
> > + >;
> > + };
> > +
> > + pinctrl_i2c3: i2c3grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f
> > + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f
> > + >;
> > + };
> > +
> > + pinctrl_qspi: qspigrp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82
> > + MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82
> > + MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82
> > + MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
> > + MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
> > + MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
> > +
> > + >;
> > + };
> > +
> > + pinctrl_ecspi2: ecspi2grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x19
> > + MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x19
> > + MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x19
> > + >;
> > + };
> > +
> > + pinctrl_ecspi2_cs: ecspi2cs {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19
> > + >;
> > + };
> > +
> > + pinctrl_uart1: uart1grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49
> > + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49
> > + >;
> > + };
> > +
> > + pinctrl_uart2: uart2grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49
> > + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49
> > + >;
> > + };
> > +
> > + pinctrl_uart3: uart3grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49
> > + MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49
> > + MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x49
> > + MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x49
> > + >;
> > + };
> > +
> > + pinctrl_usdhc1: usdhc1grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
> > + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3
> > + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3
> > + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3
> > + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3
> > + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3
> > + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3
> > + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3
> > + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3
> > + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3
> > + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83
> > + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
> > + >;
> > + };
> > +
> > + pinctrl_usdhc1_100mhz: usdhc1-100grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d
> > + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd
> > + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd
> > + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd
> > + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd
> > + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd
> > + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd
> > + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd
> > + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd
> > + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd
> > + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d
> > + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
> > + >;
> > + };
> > +
> > + pinctrl_usdhc1_200mhz: usdhc1-200grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f
> > + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf
> > + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf
> > + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf
> > + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf
> > + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf
> > + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf
> > + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf
> > + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf
> > + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf
> > + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f
> > + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
> > + >;
> > + };
> > +
> > + pinctrl_usdhc2_gpio: usdhc2gpiogrp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41
> > + MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
> > + MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x19
> > + >;
> > + };
> > +
> > + pinctrl_usdhc2: usdhc2grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83
> > + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3
> > + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
> > + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
> > + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
> > + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
> > + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
> > + >;
> > + };
> > +
> > + pinctrl_usdhc2_100mhz: usdhc2-100grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d
> > + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd
> > + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd
> > + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd
> > + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd
> > + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd
> > + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
> > + >;
> > + };
> > +
> > + pinctrl_usdhc2_200mhz: usdhc2-200grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f
> > + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xdf
> > + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xdf
> > + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xdf
> > + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xdf
> > + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xdf
> > + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
> > + >;
> > + };
> > +
> > + pinctrl_usb0: usb0grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x19
> > + MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x19
> > + >;
> > + };
> > +
> > + pinctrl_sai2: sai2grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6
> > + MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6
> > + MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6
> > + MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6
> > + MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6
> > + >;
> > + };
> > +
> > + pinctrl_spdif1: spdif1grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_SPDIF_TX_SPDIF1_OUT 0xd6
> > + >;
> > + };
> > +
> > + pinctrl_wdog: wdoggrp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
> > + >;
> > + };
> > +};
I wait for more review comments before sending a new version.
Thank you.
--
Heiko
On Thu, Feb 18, 2021 at 01:33:29PM +0100, Heiko Thiery wrote:
> The Kontron pitx-imx8m board is based on an i.MX8MQ soc.
>
> Signed-off-by: Heiko Thiery <[email protected]>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../freescale/imx8mq-kontron-pitx-imx8m.dts | 675 ++++++++++++++++++
> 2 files changed, 676 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 6438db3822f8..9fc2c6f64407 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -47,6 +47,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mq-kontron-pitx-imx8m.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> new file mode 100644
> index 000000000000..79805928204e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> @@ -0,0 +1,675 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree File for the Kontron pitx-imx8m board.
> + *
> + * Copyright (C) 2021 Heiko Thiery <[email protected]>
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mq.dtsi"
> +#include <dt-bindings/net/ti-dp83867.h>
> +
> +/ {
> + model = "Kontron pITX-imx8m";
> + compatible = "kontron,pitx-imx8m", "fsl,imx8mq";
> +
> + aliases {
> + i2c0 = &i2c1;
> + i2c1 = &i2c2;
> + i2c2 = &i2c3;
> + mmc0 = &usdhc1;
> + mmc1 = &usdhc2;
> + serial0 = &uart1;
> + serial1 = &uart2;
> + serial2 = &uart3;
> + spi0 = &qspi0;
> + spi1 = &ecspi2;
> + };
> +
> + chosen {
> + stdout-path = "serial2:115200n8";
> + };
> +
> + regulators {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg_usdhc2_vmmc: regulator-v-3v3-sd {
That's a messed unit addressing. You have here simple-bus but no unit
addresses. Move it out of regulators node and run make dtc W=1 (it would
point you this issue).
> + compatible = "regulator-fixed";
> + regulator-name = "V_3V3_SD";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> + off-on-delay-us = <20000>;
> + enable-active-high;
> + };
> + };
> +
> + usb_hub_reset: usb-hub-reset {
> + compatible = "gpio-reset";
> + reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
> + reset-delay-us = <3000>;
> + reset-post-delay-ms = <50>;
> + #reset-cells = <0>;
> + };
> +
> + tpm_reset: tpm-reset {
> + compatible = "gpio-reset";
> + reset-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
> + reset-delay-us = <2>;
> + reset-post-delay-ms = <60>;
> + #reset-cells = <0>;
> + };
> +
> + pcie0_refclk: pcie0-refclk {
Generic node names (from the dt spec candidate is "clock").
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <100000000>;
> + };
> +
> + pcie1_refclk: pcie1-refclk {
Same.
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <100000000>;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpio_keys>;
> +
> + pciewake {
> + label = "PCIE_Wake";
> + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
> + linux,input-type = <4>; /* EV_MSC */
> + linux,code = <3>; /* MSC_RAW */
> + gpio-key,wakeup;
> + };
> + };
> +};
> +
> +&ecspi2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
> + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
> + status = "okay";
> +
> + slb9670@0 {
This needs a generic node name.
> + compatible = "infineon,slb9670";
> + reg = <0>;
> + resets = <&tpm_reset>;
> + spi-max-frequency = <43000000>;
> + };
> +};
> +
> +&fec1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec1>;
> + phy-mode = "rgmii-id";
> + phy-handle = <ðphy0>;
> + phy-reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
> + fsl,magic-packet;
> + status = "okay";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy0: ethernet-phy@0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0>;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
> + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
> + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> + };
> + };
> +};
> +
> +&i2c1 {
> + clock-frequency = <400000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "okay";
> +
> + pmic@8 {
> + compatible = "fsl,pfuze100";
> + fsl,pfuze-support-disable-sw;
> + reg = <0x8>;
> +
> + regulators {
> + sw1a_reg: sw1ab {
> + regulator-name = "V_0V9_GPU";
> + regulator-min-microvolt = <825000>;
> + regulator-max-microvolt = <1100000>;
> + };
> +
> + sw1c_reg: sw1c {
> + regulator-name = "V_0V9_VPU";
> + regulator-min-microvolt = <825000>;
> + regulator-max-microvolt = <1100000>;
> + };
> +
> + sw2_reg: sw2 {
> + regulator-name = "V_1V1_NVCC_DRAM";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-always-on;
> + };
> +
> + sw3a_reg: sw3ab {
> + regulator-name = "V_1V0_DRAM";
> + regulator-min-microvolt = <825000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-always-on;
> + };
> +
> + sw4_reg: sw4 {
> + regulator-name = "V_1V8_S0";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + swbst_reg: swbst {
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5150000>;
> + };
> +
> + snvs_reg: vsnvs {
> + regulator-name = "V_0V9_SNVS";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + };
> +
> + vref_reg: vrefddr {
> + regulator-name = "V_0V55_VREF_DDR";
> + regulator-always-on;
> + };
> +
> + vgen1_reg: vgen1 {
> + regulator-name = "V_1V5_CSI";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + };
> +
> + vgen2_reg: vgen2 {
> + regulator-name = "V_0V9_PHY";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <975000>;
> + regulator-always-on;
> + };
> +
> + vgen3_reg: vgen3 {
> + regulator-name = "V_1V8_PHY";
> + regulator-min-microvolt = <1675000>;
> + regulator-max-microvolt = <1975000>;
> + regulator-always-on;
> + };
> +
> + vgen4_reg: vgen4 {
> + regulator-name = "V_1V8_VDDA";
> + regulator-min-microvolt = <1625000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-always-on;
> + };
> +
> + vgen5_reg: vgen5 {
> + regulator-name = "V_3V3_PHY";
> + regulator-min-microvolt = <3075000>;
> + regulator-max-microvolt = <3625000>;
> + regulator-always-on;
> + };
> +
> + vgen6_reg: vgen6 {
> + regulator-name = "V_2V8_CAM";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> + };
> + };
> +
> + max6650@1b {
Generic node name.
> + compatible = "maxim,max6650";
> + reg = <0x1b>;
> + maxim,fan-microvolt = <5000000>;
> + };
> +
> + rtc@32 {
> + compatible = "microcrystal,rv8803";
> + reg = <0x32>;
> + };
> +
> + lm75@4b {
Node name: sensor.
> + compatible = "national,lm75b";
> + reg = <0x4b>;
> + };
> +
> + eeprom@51 {
> + compatible = "atmel,24c32";
> + reg = <0x51>;
> + pagesize = <32>;
> + };
> +};
> +
> +&i2c2 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +};
> +
> +&i2c3 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c3>;
> + status = "okay";
> +
> + wm8904: audio-codec@1a {
> + compatible = "wlf,wm8904";
> + reg = <0x1a>;
> + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
> + clock-names = "mclk";
> + clock-frequency = <24000000>;
> + };
> +};
> +
> +/* M.2 B-key slot */
> +&pcie0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcie0>;
> + disable-gpio = <&gpio5 29 GPIO_ACTIVE_LOW>;
> + reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
> + clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
> + <&clk IMX8MQ_CLK_PCIE1_AUX>,
> + <&clk IMX8MQ_CLK_PCIE1_PHY>,
> + <&pcie0_refclk>;
> + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> + ext_osc = <1>;
> + status = "okay";
> +};
> +
> +/* Intel Ethernet Controller I210/I211 */
> +&pcie1 {
> + clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
> + <&clk IMX8MQ_CLK_PCIE2_AUX>,
> + <&clk IMX8MQ_CLK_PCIE2_PHY>,
> + <&pcie1_refclk>;
> + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> + ext_osc = <1>;
> + fsl,max-link-speed = <1>;
> + status = "okay";
> +};
> +
> +&pgc_gpu {
> + power-supply = <&sw1a_reg>;
> +};
> +
> +&pgc_vpu {
> + power-supply = <&sw1c_reg>;
> +};
> +
> +&qspi0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_qspi>;
> + status = "okay";
> +
> + flash@0 {
> + compatible = "jedec,spi-nor";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0>;
> + spi-tx-bus-width = <4>;
> + spi-rx-bus-width = <4>;
> + m25p,fast-read;
> + spi-max-frequency = <50000000>;
> + };
> +};
> +
> +&snvs_pwrkey {
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
> + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
> + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
> + status = "okay";
> +};
> +
> +&uart3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart3>;
> + fsl,uart-has-rtscts;
> + assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
> + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
> + status = "okay";
> +};
> +
> +&usb_dwc3_0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usb0>;
> + dr_mode = "otg";
> + hnp-disable;
> + srp-disable;
> + adp-disable;
> + maximum-speed = "high-speed";
> + status = "okay";
> +};
> +
> +&usb3_phy0 {
> + status = "okay";
> +};
> +
> +&usb_dwc3_1 {
> + resets = <&usb_hub_reset>;
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +&usb3_phy1 {
> + status = "okay";
> +};
> +
> +&usdhc1 {
> + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
> + assigned-clock-rates = <400000000>;
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> + vqmmc-supply = <&sw4_reg>;
> + bus-width = <8>;
> + non-removable;
> + no-sd;
> + no-sdio;
> + status = "okay";
> +};
> +
> +&usdhc2 {
> + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
> + assigned-clock-rates = <200000000>;
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
> + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
> + bus-width = <4>;
> + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> + wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
> + vmmc-supply = <®_usdhc2_vmmc>;
> + status = "okay";
> +};
> +
> +&wdog1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdog>;
> + fsl,ext-reset-output;
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
> +
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 /* TPM Reset */
> + MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19 /* USB2 Hub Reset */
> + >;
> + };
> +
> + pinctrl_gpio: gpiogrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 /* GPIO0 */
> + MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19 /* GPIO1 */
> + MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17 0x19 /* GPIO2 */
> + MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18 0x19 /* GPIO3 */
> + MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 /* GPIO4 */
> + MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x19 /* GPIO5 */
> + MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x19 /* GPIO6 */
> + MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x19 /* GPIO7 */
> + >;
> + };
> +
> + pinctrl_pcie0: pcie0grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x16 /* PCIE_PERST */
> + MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29 0x16 /* W_DISABLE */
> + >;
> + };
> +
> + pinctrl_gpio_keys: gpio-keysgrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x16 /* PCIE_WAKE */
> + >;
> + };
> +
> + pinctrl_fec1: fec1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
> + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23
> + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
> + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
> + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
> + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
> + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
> + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
> + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
> + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
> + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
> + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
> + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
> + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
> + MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x16
> + MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x16
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
> + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f
> + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f
> + >;
> + };
> +
> + pinctrl_i2c3: i2c3grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f
> + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f
> + >;
> + };
> +
> + pinctrl_qspi: qspigrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82
> + MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82
> + MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82
> + MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
> + MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
> + MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
> +
No need for empty line.
> + >;
> + };
> +
> + pinctrl_ecspi2: ecspi2grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x19
> + MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x19
> + MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x19
> + >;
> + };
> +
> + pinctrl_ecspi2_cs: ecspi2cs {
ecspi2csgrp to match schema
Please run dtbs_check on your DTS.
Best regards,
Krzysztof
Hi Krysztof,
Am So., 21. Feb. 2021 um 13:11 Uhr schrieb Krzysztof Kozlowski
<[email protected]>:
>
> On Thu, Feb 18, 2021 at 01:33:29PM +0100, Heiko Thiery wrote:
> > The Kontron pitx-imx8m board is based on an i.MX8MQ soc.
> >
> > Signed-off-by: Heiko Thiery <[email protected]>
> > ---
> > arch/arm64/boot/dts/freescale/Makefile | 1 +
> > .../freescale/imx8mq-kontron-pitx-imx8m.dts | 675 ++++++++++++++++++
> > 2 files changed, 676 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> >
> > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> > index 6438db3822f8..9fc2c6f64407 100644
> > --- a/arch/arm64/boot/dts/freescale/Makefile
> > +++ b/arch/arm64/boot/dts/freescale/Makefile
> > @@ -47,6 +47,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
> > +dtb-$(CONFIG_ARCH_MXC) += imx8mq-kontron-pitx-imx8m.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> > new file mode 100644
> > index 000000000000..79805928204e
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> > @@ -0,0 +1,675 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Device Tree File for the Kontron pitx-imx8m board.
> > + *
> > + * Copyright (C) 2021 Heiko Thiery <[email protected]>
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "imx8mq.dtsi"
> > +#include <dt-bindings/net/ti-dp83867.h>
> > +
> > +/ {
> > + model = "Kontron pITX-imx8m";
> > + compatible = "kontron,pitx-imx8m", "fsl,imx8mq";
> > +
> > + aliases {
> > + i2c0 = &i2c1;
> > + i2c1 = &i2c2;
> > + i2c2 = &i2c3;
> > + mmc0 = &usdhc1;
> > + mmc1 = &usdhc2;
> > + serial0 = &uart1;
> > + serial1 = &uart2;
> > + serial2 = &uart3;
> > + spi0 = &qspi0;
> > + spi1 = &ecspi2;
> > + };
> > +
> > + chosen {
> > + stdout-path = "serial2:115200n8";
> > + };
> > +
> > + regulators {
> > + compatible = "simple-bus";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + reg_usdhc2_vmmc: regulator-v-3v3-sd {
>
> That's a messed unit addressing. You have here simple-bus but no unit
> addresses. Move it out of regulators node and run make dtc W=1 (it would
> point you this issue).
Ok, I will change that.
But I'm not able to run dtc on my dts. dtc throws an error.
# dtc -I dts -O dtb imx8mq-kontron-pitx-imx8m.dts
Error: imx8mq-kontron-pitx-imx8m.dts:10.1-9 syntax error
FATAL ERROR: Unable to parse input tree
It is about the includes. How can I run dtc for a intree dts to add
the -W option?
> > + compatible = "regulator-fixed";
> > + regulator-name = "V_3V3_SD";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> > + off-on-delay-us = <20000>;
> > + enable-active-high;
> > + };
> > + };
> > +
> > + usb_hub_reset: usb-hub-reset {
> > + compatible = "gpio-reset";
> > + reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
> > + reset-delay-us = <3000>;
> > + reset-post-delay-ms = <50>;
> > + #reset-cells = <0>;
> > + };
> > +
> > + tpm_reset: tpm-reset {
> > + compatible = "gpio-reset";
> > + reset-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
> > + reset-delay-us = <2>;
> > + reset-post-delay-ms = <60>;
> > + #reset-cells = <0>;
> > + };
> > +
> > + pcie0_refclk: pcie0-refclk {
>
> Generic node names (from the dt spec candidate is "clock").
Should I simply set the node name to pcie0-clock? And pcie1-clock for
the next one?
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <100000000>;
> > + };
> > +
> > + pcie1_refclk: pcie1-refclk {
>
> Same.
>
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <100000000>;
> > + };
> > +
> > + gpio-keys {
> > + compatible = "gpio-keys";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_gpio_keys>;
> > +
> > + pciewake {
> > + label = "PCIE_Wake";
> > + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
> > + linux,input-type = <4>; /* EV_MSC */
> > + linux,code = <3>; /* MSC_RAW */
> > + gpio-key,wakeup;
> > + };
> > + };
> > +};
> > +
> > +&ecspi2 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
> > + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
> > + status = "okay";
> > +
> > + slb9670@0 {
>
> This needs a generic node name.
I will change to tpm@0.
>
> > + compatible = "infineon,slb9670";
> > + reg = <0>;
> > + resets = <&tpm_reset>;
> > + spi-max-frequency = <43000000>;
> > + };
> > +};
> > +
> > +&fec1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_fec1>;
> > + phy-mode = "rgmii-id";
> > + phy-handle = <ðphy0>;
> > + phy-reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
> > + fsl,magic-packet;
> > + status = "okay";
> > +
> > + mdio {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + ethphy0: ethernet-phy@0 {
> > + compatible = "ethernet-phy-ieee802.3-c22";
> > + reg = <0>;
> > + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
> > + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
> > + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> > + };
> > + };
> > +};
> > +
> > +&i2c1 {
> > + clock-frequency = <400000>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c1>;
> > + status = "okay";
> > +
> > + pmic@8 {
> > + compatible = "fsl,pfuze100";
> > + fsl,pfuze-support-disable-sw;
> > + reg = <0x8>;
> > +
> > + regulators {
> > + sw1a_reg: sw1ab {
> > + regulator-name = "V_0V9_GPU";
> > + regulator-min-microvolt = <825000>;
> > + regulator-max-microvolt = <1100000>;
> > + };
> > +
> > + sw1c_reg: sw1c {
> > + regulator-name = "V_0V9_VPU";
> > + regulator-min-microvolt = <825000>;
> > + regulator-max-microvolt = <1100000>;
> > + };
> > +
> > + sw2_reg: sw2 {
> > + regulator-name = "V_1V1_NVCC_DRAM";
> > + regulator-min-microvolt = <1100000>;
> > + regulator-max-microvolt = <1100000>;
> > + regulator-always-on;
> > + };
> > +
> > + sw3a_reg: sw3ab {
> > + regulator-name = "V_1V0_DRAM";
> > + regulator-min-microvolt = <825000>;
> > + regulator-max-microvolt = <1100000>;
> > + regulator-always-on;
> > + };
> > +
> > + sw4_reg: sw4 {
> > + regulator-name = "V_1V8_S0";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-always-on;
> > + };
> > +
> > + swbst_reg: swbst {
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5150000>;
> > + };
> > +
> > + snvs_reg: vsnvs {
> > + regulator-name = "V_0V9_SNVS";
> > + regulator-min-microvolt = <1000000>;
> > + regulator-max-microvolt = <3000000>;
> > + regulator-always-on;
> > + };
> > +
> > + vref_reg: vrefddr {
> > + regulator-name = "V_0V55_VREF_DDR";
> > + regulator-always-on;
> > + };
> > +
> > + vgen1_reg: vgen1 {
> > + regulator-name = "V_1V5_CSI";
> > + regulator-min-microvolt = <800000>;
> > + regulator-max-microvolt = <1550000>;
> > + };
> > +
> > + vgen2_reg: vgen2 {
> > + regulator-name = "V_0V9_PHY";
> > + regulator-min-microvolt = <850000>;
> > + regulator-max-microvolt = <975000>;
> > + regulator-always-on;
> > + };
> > +
> > + vgen3_reg: vgen3 {
> > + regulator-name = "V_1V8_PHY";
> > + regulator-min-microvolt = <1675000>;
> > + regulator-max-microvolt = <1975000>;
> > + regulator-always-on;
> > + };
> > +
> > + vgen4_reg: vgen4 {
> > + regulator-name = "V_1V8_VDDA";
> > + regulator-min-microvolt = <1625000>;
> > + regulator-max-microvolt = <1875000>;
> > + regulator-always-on;
> > + };
> > +
> > + vgen5_reg: vgen5 {
> > + regulator-name = "V_3V3_PHY";
> > + regulator-min-microvolt = <3075000>;
> > + regulator-max-microvolt = <3625000>;
> > + regulator-always-on;
> > + };
> > +
> > + vgen6_reg: vgen6 {
> > + regulator-name = "V_2V8_CAM";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-always-on;
> > + };
> > + };
> > + };
> > +
> > + max6650@1b {
>
> Generic node name.
I could not find a matching name like "fan" in the devicetree
specification. What about using "fan-ctrl"?
>
> > + compatible = "maxim,max6650";
> > + reg = <0x1b>;
> > + maxim,fan-microvolt = <5000000>;
> > + };
> > +
> > + rtc@32 {
> > + compatible = "microcrystal,rv8803";
> > + reg = <0x32>;
> > + };
> > +
> > + lm75@4b {
>
> Node name: sensor.
Ok
>
> > + compatible = "national,lm75b";
> > + reg = <0x4b>;
> > + };
> > +
> > + eeprom@51 {
> > + compatible = "atmel,24c32";
> > + reg = <0x51>;
> > + pagesize = <32>;
> > + };
> > +};
> > +
> > +&i2c2 {
> > + clock-frequency = <100000>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c2>;
> > + status = "okay";
> > +};
> > +
> > +&i2c3 {
> > + clock-frequency = <100000>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c3>;
> > + status = "okay";
> > +
> > + wm8904: audio-codec@1a {
> > + compatible = "wlf,wm8904";
> > + reg = <0x1a>;
> > + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
> > + clock-names = "mclk";
> > + clock-frequency = <24000000>;
> > + };
> > +};
> > +
> > +/* M.2 B-key slot */
> > +&pcie0 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_pcie0>;
> > + disable-gpio = <&gpio5 29 GPIO_ACTIVE_LOW>;
> > + reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
> > + clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
> > + <&clk IMX8MQ_CLK_PCIE1_AUX>,
> > + <&clk IMX8MQ_CLK_PCIE1_PHY>,
> > + <&pcie0_refclk>;
> > + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> > + ext_osc = <1>;
> > + status = "okay";
> > +};
> > +
> > +/* Intel Ethernet Controller I210/I211 */
> > +&pcie1 {
> > + clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
> > + <&clk IMX8MQ_CLK_PCIE2_AUX>,
> > + <&clk IMX8MQ_CLK_PCIE2_PHY>,
> > + <&pcie1_refclk>;
> > + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> > + ext_osc = <1>;
> > + fsl,max-link-speed = <1>;
> > + status = "okay";
> > +};
> > +
> > +&pgc_gpu {
> > + power-supply = <&sw1a_reg>;
> > +};
> > +
> > +&pgc_vpu {
> > + power-supply = <&sw1c_reg>;
> > +};
> > +
> > +&qspi0 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_qspi>;
> > + status = "okay";
> > +
> > + flash@0 {
> > + compatible = "jedec,spi-nor";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + reg = <0>;
> > + spi-tx-bus-width = <4>;
> > + spi-rx-bus-width = <4>;
> > + m25p,fast-read;
> > + spi-max-frequency = <50000000>;
> > + };
> > +};
> > +
> > +&snvs_pwrkey {
> > + status = "okay";
> > +};
> > +
> > +&uart1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_uart1>;
> > + assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
> > + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
> > + status = "okay";
> > +};
> > +
> > +&uart2 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_uart2>;
> > + assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
> > + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
> > + status = "okay";
> > +};
> > +
> > +&uart3 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_uart3>;
> > + fsl,uart-has-rtscts;
> > + assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
> > + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
> > + status = "okay";
> > +};
> > +
> > +&usb_dwc3_0 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_usb0>;
> > + dr_mode = "otg";
> > + hnp-disable;
> > + srp-disable;
> > + adp-disable;
> > + maximum-speed = "high-speed";
> > + status = "okay";
> > +};
> > +
> > +&usb3_phy0 {
> > + status = "okay";
> > +};
> > +
> > +&usb_dwc3_1 {
> > + resets = <&usb_hub_reset>;
> > + dr_mode = "host";
> > + status = "okay";
> > +};
> > +
> > +&usb3_phy1 {
> > + status = "okay";
> > +};
> > +
> > +&usdhc1 {
> > + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
> > + assigned-clock-rates = <400000000>;
> > + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> > + pinctrl-0 = <&pinctrl_usdhc1>;
> > + pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> > + pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> > + vqmmc-supply = <&sw4_reg>;
> > + bus-width = <8>;
> > + non-removable;
> > + no-sd;
> > + no-sdio;
> > + status = "okay";
> > +};
> > +
> > +&usdhc2 {
> > + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
> > + assigned-clock-rates = <200000000>;
> > + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> > + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> > + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
> > + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
> > + bus-width = <4>;
> > + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> > + wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
> > + vmmc-supply = <®_usdhc2_vmmc>;
> > + status = "okay";
> > +};
> > +
> > +&wdog1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_wdog>;
> > + fsl,ext-reset-output;
> > + status = "okay";
> > +};
> > +
> > +&iomuxc {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_hog>;
> > +
> > + pinctrl_hog: hoggrp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 /* TPM Reset */
> > + MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19 /* USB2 Hub Reset */
> > + >;
> > + };
> > +
> > + pinctrl_gpio: gpiogrp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 /* GPIO0 */
> > + MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19 /* GPIO1 */
> > + MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17 0x19 /* GPIO2 */
> > + MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18 0x19 /* GPIO3 */
> > + MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 /* GPIO4 */
> > + MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x19 /* GPIO5 */
> > + MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x19 /* GPIO6 */
> > + MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x19 /* GPIO7 */
> > + >;
> > + };
> > +
> > + pinctrl_pcie0: pcie0grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x16 /* PCIE_PERST */
> > + MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29 0x16 /* W_DISABLE */
> > + >;
> > + };
> > +
> > + pinctrl_gpio_keys: gpio-keysgrp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x16 /* PCIE_WAKE */
> > + >;
> > + };
> > +
> > + pinctrl_fec1: fec1grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
> > + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23
> > + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
> > + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
> > + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
> > + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
> > + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
> > + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
> > + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
> > + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
> > + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
> > + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
> > + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
> > + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
> > + MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x16
> > + MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x16
> > + >;
> > + };
> > +
> > + pinctrl_i2c1: i2c1grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
> > + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
> > + >;
> > + };
> > +
> > + pinctrl_i2c2: i2c2grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f
> > + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f
> > + >;
> > + };
> > +
> > + pinctrl_i2c3: i2c3grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f
> > + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f
> > + >;
> > + };
> > +
> > + pinctrl_qspi: qspigrp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82
> > + MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82
> > + MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82
> > + MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
> > + MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
> > + MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
> > +
>
> No need for empty line.
Ok
>
> > + >;
> > + };
> > +
> > + pinctrl_ecspi2: ecspi2grp {
> > + fsl,pins = <
> > + MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x19
> > + MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x19
> > + MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x19
> > + >;
> > + };
> > +
> > + pinctrl_ecspi2_cs: ecspi2cs {
>
> ecspi2csgrp to match schema
Ok
>
> Please run dtbs_check on your DTS.
When I run "make dtbs_check" it runs quite a long time and stops with
an error. But as far as I can say there is an error coming from the
included "imx8mq.dtsi".
You can see the output here: https://pastebin.com/raw/iU2geBDh
Thank you
--
Heiko
On Mon, Feb 22, 2021 at 08:46:52AM +0100, Heiko Thiery wrote:
> Hi Krysztof,
>
> Am So., 21. Feb. 2021 um 13:11 Uhr schrieb Krzysztof Kozlowski
> <[email protected]>:
> >
> > On Thu, Feb 18, 2021 at 01:33:29PM +0100, Heiko Thiery wrote:
> > > The Kontron pitx-imx8m board is based on an i.MX8MQ soc.
> > >
> > > Signed-off-by: Heiko Thiery <[email protected]>
> > > ---
> > > arch/arm64/boot/dts/freescale/Makefile | 1 +
> > > .../freescale/imx8mq-kontron-pitx-imx8m.dts | 675 ++++++++++++++++++
> > > 2 files changed, 676 insertions(+)
> > > create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> > >
> > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> > > index 6438db3822f8..9fc2c6f64407 100644
> > > --- a/arch/arm64/boot/dts/freescale/Makefile
> > > +++ b/arch/arm64/boot/dts/freescale/Makefile
> > > @@ -47,6 +47,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
> > > dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
> > > dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
> > > dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
> > > +dtb-$(CONFIG_ARCH_MXC) += imx8mq-kontron-pitx-imx8m.dtb
> > > dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
> > > dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb
> > > dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> > > new file mode 100644
> > > index 000000000000..79805928204e
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> > > @@ -0,0 +1,675 @@
> > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > > +/*
> > > + * Device Tree File for the Kontron pitx-imx8m board.
> > > + *
> > > + * Copyright (C) 2021 Heiko Thiery <[email protected]>
> > > + */
> > > +
> > > +/dts-v1/;
> > > +
> > > +#include "imx8mq.dtsi"
> > > +#include <dt-bindings/net/ti-dp83867.h>
> > > +
> > > +/ {
> > > + model = "Kontron pITX-imx8m";
> > > + compatible = "kontron,pitx-imx8m", "fsl,imx8mq";
> > > +
> > > + aliases {
> > > + i2c0 = &i2c1;
> > > + i2c1 = &i2c2;
> > > + i2c2 = &i2c3;
> > > + mmc0 = &usdhc1;
> > > + mmc1 = &usdhc2;
> > > + serial0 = &uart1;
> > > + serial1 = &uart2;
> > > + serial2 = &uart3;
> > > + spi0 = &qspi0;
> > > + spi1 = &ecspi2;
> > > + };
> > > +
> > > + chosen {
> > > + stdout-path = "serial2:115200n8";
> > > + };
> > > +
> > > + regulators {
> > > + compatible = "simple-bus";
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + reg_usdhc2_vmmc: regulator-v-3v3-sd {
> >
> > That's a messed unit addressing. You have here simple-bus but no unit
> > addresses. Move it out of regulators node and run make dtc W=1 (it would
> > point you this issue).
>
> Ok, I will change that.
>
> But I'm not able to run dtc on my dts. dtc throws an error.
>
> # dtc -I dts -O dtb imx8mq-kontron-pitx-imx8m.dts
> Error: imx8mq-kontron-pitx-imx8m.dts:10.1-9 syntax error
> FATAL ERROR: Unable to parse input tree
>
> It is about the includes. How can I run dtc for a intree dts to add
> the -W option?
make dtbs W=1
>
> > > + compatible = "regulator-fixed";
> > > + regulator-name = "V_3V3_SD";
> > > + regulator-min-microvolt = <3300000>;
> > > + regulator-max-microvolt = <3300000>;
> > > + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> > > + off-on-delay-us = <20000>;
> > > + enable-active-high;
> > > + };
> > > + };
> > > +
> > > + usb_hub_reset: usb-hub-reset {
> > > + compatible = "gpio-reset";
> > > + reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
> > > + reset-delay-us = <3000>;
> > > + reset-post-delay-ms = <50>;
> > > + #reset-cells = <0>;
> > > + };
> > > +
> > > + tpm_reset: tpm-reset {
> > > + compatible = "gpio-reset";
> > > + reset-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
> > > + reset-delay-us = <2>;
> > > + reset-post-delay-ms = <60>;
> > > + #reset-cells = <0>;
> > > + };
> > > +
> > > + pcie0_refclk: pcie0-refclk {
> >
> > Generic node names (from the dt spec candidate is "clock").
>
> Should I simply set the node name to pcie0-clock? And pcie1-clock for
> the next one?
I am fine with "pcie0-clock" or just "clock-0".
>
> > > + compatible = "fixed-clock";
> > > + #clock-cells = <0>;
> > > + clock-frequency = <100000000>;
> > > + };
> > > +
> > > + pcie1_refclk: pcie1-refclk {
> >
> > Same.
> >
> > > + compatible = "fixed-clock";
> > > + #clock-cells = <0>;
> > > + clock-frequency = <100000000>;
> > > + };
> > > +
> > > + gpio-keys {
> > > + compatible = "gpio-keys";
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_gpio_keys>;
> > > +
> > > + pciewake {
> > > + label = "PCIE_Wake";
> > > + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
> > > + linux,input-type = <4>; /* EV_MSC */
> > > + linux,code = <3>; /* MSC_RAW */
> > > + gpio-key,wakeup;
> > > + };
> > > + };
> > > +};
> > > +
> > > +&ecspi2 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
> > > + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
> > > + status = "okay";
> > > +
> > > + slb9670@0 {
> >
> > This needs a generic node name.
>
> I will change to tpm@0.
Thanks.
>
> >
> > > + compatible = "infineon,slb9670";
> > > + reg = <0>;
> > > + resets = <&tpm_reset>;
> > > + spi-max-frequency = <43000000>;
> > > + };
> > > +};
> > > +
> > > +&fec1 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_fec1>;
> > > + phy-mode = "rgmii-id";
> > > + phy-handle = <ðphy0>;
> > > + phy-reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
> > > + fsl,magic-packet;
> > > + status = "okay";
> > > +
> > > + mdio {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + ethphy0: ethernet-phy@0 {
> > > + compatible = "ethernet-phy-ieee802.3-c22";
> > > + reg = <0>;
> > > + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
> > > + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
> > > + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> > > + };
> > > + };
> > > +};
> > > +
> > > +&i2c1 {
> > > + clock-frequency = <400000>;
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_i2c1>;
> > > + status = "okay";
> > > +
> > > + pmic@8 {
> > > + compatible = "fsl,pfuze100";
> > > + fsl,pfuze-support-disable-sw;
> > > + reg = <0x8>;
> > > +
> > > + regulators {
> > > + sw1a_reg: sw1ab {
> > > + regulator-name = "V_0V9_GPU";
> > > + regulator-min-microvolt = <825000>;
> > > + regulator-max-microvolt = <1100000>;
> > > + };
> > > +
> > > + sw1c_reg: sw1c {
> > > + regulator-name = "V_0V9_VPU";
> > > + regulator-min-microvolt = <825000>;
> > > + regulator-max-microvolt = <1100000>;
> > > + };
> > > +
> > > + sw2_reg: sw2 {
> > > + regulator-name = "V_1V1_NVCC_DRAM";
> > > + regulator-min-microvolt = <1100000>;
> > > + regulator-max-microvolt = <1100000>;
> > > + regulator-always-on;
> > > + };
> > > +
> > > + sw3a_reg: sw3ab {
> > > + regulator-name = "V_1V0_DRAM";
> > > + regulator-min-microvolt = <825000>;
> > > + regulator-max-microvolt = <1100000>;
> > > + regulator-always-on;
> > > + };
> > > +
> > > + sw4_reg: sw4 {
> > > + regulator-name = "V_1V8_S0";
> > > + regulator-min-microvolt = <1800000>;
> > > + regulator-max-microvolt = <1800000>;
> > > + regulator-always-on;
> > > + };
> > > +
> > > + swbst_reg: swbst {
> > > + regulator-min-microvolt = <5000000>;
> > > + regulator-max-microvolt = <5150000>;
> > > + };
> > > +
> > > + snvs_reg: vsnvs {
> > > + regulator-name = "V_0V9_SNVS";
> > > + regulator-min-microvolt = <1000000>;
> > > + regulator-max-microvolt = <3000000>;
> > > + regulator-always-on;
> > > + };
> > > +
> > > + vref_reg: vrefddr {
> > > + regulator-name = "V_0V55_VREF_DDR";
> > > + regulator-always-on;
> > > + };
> > > +
> > > + vgen1_reg: vgen1 {
> > > + regulator-name = "V_1V5_CSI";
> > > + regulator-min-microvolt = <800000>;
> > > + regulator-max-microvolt = <1550000>;
> > > + };
> > > +
> > > + vgen2_reg: vgen2 {
> > > + regulator-name = "V_0V9_PHY";
> > > + regulator-min-microvolt = <850000>;
> > > + regulator-max-microvolt = <975000>;
> > > + regulator-always-on;
> > > + };
> > > +
> > > + vgen3_reg: vgen3 {
> > > + regulator-name = "V_1V8_PHY";
> > > + regulator-min-microvolt = <1675000>;
> > > + regulator-max-microvolt = <1975000>;
> > > + regulator-always-on;
> > > + };
> > > +
> > > + vgen4_reg: vgen4 {
> > > + regulator-name = "V_1V8_VDDA";
> > > + regulator-min-microvolt = <1625000>;
> > > + regulator-max-microvolt = <1875000>;
> > > + regulator-always-on;
> > > + };
> > > +
> > > + vgen5_reg: vgen5 {
> > > + regulator-name = "V_3V3_PHY";
> > > + regulator-min-microvolt = <3075000>;
> > > + regulator-max-microvolt = <3625000>;
> > > + regulator-always-on;
> > > + };
> > > +
> > > + vgen6_reg: vgen6 {
> > > + regulator-name = "V_2V8_CAM";
> > > + regulator-min-microvolt = <1800000>;
> > > + regulator-max-microvolt = <3300000>;
> > > + regulator-always-on;
> > > + };
> > > + };
> > > + };
> > > +
> > > + max6650@1b {
> >
> > Generic node name.
>
> I could not find a matching name like "fan" in the devicetree
> specification. What about using "fan-ctrl"?
So maybe "fan-controller"?
>
> >
> > > + compatible = "maxim,max6650";
> > > + reg = <0x1b>;
> > > + maxim,fan-microvolt = <5000000>;
> > > + };
> > > +
> > > + rtc@32 {
> > > + compatible = "microcrystal,rv8803";
> > > + reg = <0x32>;
> > > + };
> > > +
> > > + lm75@4b {
> >
> > Node name: sensor.
>
> Ok
>
> >
> > > + compatible = "national,lm75b";
> > > + reg = <0x4b>;
> > > + };
> > > +
> > > + eeprom@51 {
> > > + compatible = "atmel,24c32";
> > > + reg = <0x51>;
> > > + pagesize = <32>;
> > > + };
> > > +};
> > > +
> > > +&i2c2 {
> > > + clock-frequency = <100000>;
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_i2c2>;
> > > + status = "okay";
> > > +};
> > > +
> > > +&i2c3 {
> > > + clock-frequency = <100000>;
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_i2c3>;
> > > + status = "okay";
> > > +
> > > + wm8904: audio-codec@1a {
> > > + compatible = "wlf,wm8904";
> > > + reg = <0x1a>;
> > > + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
> > > + clock-names = "mclk";
> > > + clock-frequency = <24000000>;
> > > + };
> > > +};
> > > +
> > > +/* M.2 B-key slot */
> > > +&pcie0 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_pcie0>;
> > > + disable-gpio = <&gpio5 29 GPIO_ACTIVE_LOW>;
> > > + reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
> > > + clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
> > > + <&clk IMX8MQ_CLK_PCIE1_AUX>,
> > > + <&clk IMX8MQ_CLK_PCIE1_PHY>,
> > > + <&pcie0_refclk>;
> > > + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> > > + ext_osc = <1>;
> > > + status = "okay";
> > > +};
> > > +
> > > +/* Intel Ethernet Controller I210/I211 */
> > > +&pcie1 {
> > > + clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
> > > + <&clk IMX8MQ_CLK_PCIE2_AUX>,
> > > + <&clk IMX8MQ_CLK_PCIE2_PHY>,
> > > + <&pcie1_refclk>;
> > > + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> > > + ext_osc = <1>;
> > > + fsl,max-link-speed = <1>;
> > > + status = "okay";
> > > +};
> > > +
> > > +&pgc_gpu {
> > > + power-supply = <&sw1a_reg>;
> > > +};
> > > +
> > > +&pgc_vpu {
> > > + power-supply = <&sw1c_reg>;
> > > +};
> > > +
> > > +&qspi0 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_qspi>;
> > > + status = "okay";
> > > +
> > > + flash@0 {
> > > + compatible = "jedec,spi-nor";
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > + reg = <0>;
> > > + spi-tx-bus-width = <4>;
> > > + spi-rx-bus-width = <4>;
> > > + m25p,fast-read;
> > > + spi-max-frequency = <50000000>;
> > > + };
> > > +};
> > > +
> > > +&snvs_pwrkey {
> > > + status = "okay";
> > > +};
> > > +
> > > +&uart1 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_uart1>;
> > > + assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
> > > + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
> > > + status = "okay";
> > > +};
> > > +
> > > +&uart2 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_uart2>;
> > > + assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
> > > + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
> > > + status = "okay";
> > > +};
> > > +
> > > +&uart3 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_uart3>;
> > > + fsl,uart-has-rtscts;
> > > + assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
> > > + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
> > > + status = "okay";
> > > +};
> > > +
> > > +&usb_dwc3_0 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_usb0>;
> > > + dr_mode = "otg";
> > > + hnp-disable;
> > > + srp-disable;
> > > + adp-disable;
> > > + maximum-speed = "high-speed";
> > > + status = "okay";
> > > +};
> > > +
> > > +&usb3_phy0 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&usb_dwc3_1 {
> > > + resets = <&usb_hub_reset>;
> > > + dr_mode = "host";
> > > + status = "okay";
> > > +};
> > > +
> > > +&usb3_phy1 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&usdhc1 {
> > > + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
> > > + assigned-clock-rates = <400000000>;
> > > + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> > > + pinctrl-0 = <&pinctrl_usdhc1>;
> > > + pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> > > + pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> > > + vqmmc-supply = <&sw4_reg>;
> > > + bus-width = <8>;
> > > + non-removable;
> > > + no-sd;
> > > + no-sdio;
> > > + status = "okay";
> > > +};
> > > +
> > > +&usdhc2 {
> > > + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
> > > + assigned-clock-rates = <200000000>;
> > > + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> > > + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> > > + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
> > > + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
> > > + bus-width = <4>;
> > > + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> > > + wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
> > > + vmmc-supply = <®_usdhc2_vmmc>;
> > > + status = "okay";
> > > +};
> > > +
> > > +&wdog1 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_wdog>;
> > > + fsl,ext-reset-output;
> > > + status = "okay";
> > > +};
> > > +
> > > +&iomuxc {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_hog>;
> > > +
> > > + pinctrl_hog: hoggrp {
> > > + fsl,pins = <
> > > + MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 /* TPM Reset */
> > > + MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19 /* USB2 Hub Reset */
> > > + >;
> > > + };
> > > +
> > > + pinctrl_gpio: gpiogrp {
> > > + fsl,pins = <
> > > + MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 /* GPIO0 */
> > > + MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19 /* GPIO1 */
> > > + MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17 0x19 /* GPIO2 */
> > > + MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18 0x19 /* GPIO3 */
> > > + MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 /* GPIO4 */
> > > + MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x19 /* GPIO5 */
> > > + MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x19 /* GPIO6 */
> > > + MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x19 /* GPIO7 */
> > > + >;
> > > + };
> > > +
> > > + pinctrl_pcie0: pcie0grp {
> > > + fsl,pins = <
> > > + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x16 /* PCIE_PERST */
> > > + MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29 0x16 /* W_DISABLE */
> > > + >;
> > > + };
> > > +
> > > + pinctrl_gpio_keys: gpio-keysgrp {
> > > + fsl,pins = <
> > > + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x16 /* PCIE_WAKE */
> > > + >;
> > > + };
> > > +
> > > + pinctrl_fec1: fec1grp {
> > > + fsl,pins = <
> > > + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
> > > + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23
> > > + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
> > > + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
> > > + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
> > > + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
> > > + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
> > > + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
> > > + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
> > > + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
> > > + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
> > > + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
> > > + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
> > > + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
> > > + MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x16
> > > + MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x16
> > > + >;
> > > + };
> > > +
> > > + pinctrl_i2c1: i2c1grp {
> > > + fsl,pins = <
> > > + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
> > > + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
> > > + >;
> > > + };
> > > +
> > > + pinctrl_i2c2: i2c2grp {
> > > + fsl,pins = <
> > > + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f
> > > + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f
> > > + >;
> > > + };
> > > +
> > > + pinctrl_i2c3: i2c3grp {
> > > + fsl,pins = <
> > > + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f
> > > + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f
> > > + >;
> > > + };
> > > +
> > > + pinctrl_qspi: qspigrp {
> > > + fsl,pins = <
> > > + MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82
> > > + MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82
> > > + MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82
> > > + MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
> > > + MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
> > > + MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
> > > +
> >
> > No need for empty line.
>
> Ok
>
> >
> > > + >;
> > > + };
> > > +
> > > + pinctrl_ecspi2: ecspi2grp {
> > > + fsl,pins = <
> > > + MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x19
> > > + MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x19
> > > + MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x19
> > > + >;
> > > + };
> > > +
> > > + pinctrl_ecspi2_cs: ecspi2cs {
> >
> > ecspi2csgrp to match schema
>
> Ok
>
> >
> > Please run dtbs_check on your DTS.
>
> When I run "make dtbs_check" it runs quite a long time and stops with
> an error. But as far as I can say there is an error coming from the
> included "imx8mq.dtsi".
>
> You can see the output here: https://pastebin.com/raw/iU2geBDh
Looks fine (except the error tool :) ).
Best regards,
Krzysztof
Hi Krzysztof,
Am Mo., 22. Feb. 2021 um 09:40 Uhr schrieb Krzysztof Kozlowski
<[email protected]>:
>
> On Mon, Feb 22, 2021 at 08:46:52AM +0100, Heiko Thiery wrote:
> > Hi Krysztof,
> >
> > Am So., 21. Feb. 2021 um 13:11 Uhr schrieb Krzysztof Kozlowski
> > <[email protected]>:
> > >
> > > On Thu, Feb 18, 2021 at 01:33:29PM +0100, Heiko Thiery wrote:
> > > > The Kontron pitx-imx8m board is based on an i.MX8MQ soc.
> > > >
> > > > Signed-off-by: Heiko Thiery <[email protected]>
> > > > ---
> > > > arch/arm64/boot/dts/freescale/Makefile | 1 +
> > > > .../freescale/imx8mq-kontron-pitx-imx8m.dts | 675 ++++++++++++++++++
> > > > 2 files changed, 676 insertions(+)
> > > > create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> > > >
> > > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> > > > index 6438db3822f8..9fc2c6f64407 100644
> > > > --- a/arch/arm64/boot/dts/freescale/Makefile
> > > > +++ b/arch/arm64/boot/dts/freescale/Makefile
> > > > @@ -47,6 +47,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
> > > > dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
> > > > dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
> > > > dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
> > > > +dtb-$(CONFIG_ARCH_MXC) += imx8mq-kontron-pitx-imx8m.dtb
> > > > dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
> > > > dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb
> > > > dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb
> > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> > > > new file mode 100644
> > > > index 000000000000..79805928204e
> > > > --- /dev/null
> > > > +++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> > > > @@ -0,0 +1,675 @@
> > > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > > > +/*
> > > > + * Device Tree File for the Kontron pitx-imx8m board.
> > > > + *
> > > > + * Copyright (C) 2021 Heiko Thiery <[email protected]>
> > > > + */
> > > > +
> > > > +/dts-v1/;
> > > > +
> > > > +#include "imx8mq.dtsi"
> > > > +#include <dt-bindings/net/ti-dp83867.h>
> > > > +
> > > > +/ {
> > > > + model = "Kontron pITX-imx8m";
> > > > + compatible = "kontron,pitx-imx8m", "fsl,imx8mq";
> > > > +
> > > > + aliases {
> > > > + i2c0 = &i2c1;
> > > > + i2c1 = &i2c2;
> > > > + i2c2 = &i2c3;
> > > > + mmc0 = &usdhc1;
> > > > + mmc1 = &usdhc2;
> > > > + serial0 = &uart1;
> > > > + serial1 = &uart2;
> > > > + serial2 = &uart3;
> > > > + spi0 = &qspi0;
> > > > + spi1 = &ecspi2;
> > > > + };
> > > > +
> > > > + chosen {
> > > > + stdout-path = "serial2:115200n8";
> > > > + };
> > > > +
> > > > + regulators {
> > > > + compatible = "simple-bus";
> > > > + #address-cells = <1>;
> > > > + #size-cells = <0>;
> > > > +
> > > > + reg_usdhc2_vmmc: regulator-v-3v3-sd {
> > >
> > > That's a messed unit addressing. You have here simple-bus but no unit
> > > addresses. Move it out of regulators node and run make dtc W=1 (it would
> > > point you this issue).
> >
> > Ok, I will change that.
> >
> > But I'm not able to run dtc on my dts. dtc throws an error.
> >
> > # dtc -I dts -O dtb imx8mq-kontron-pitx-imx8m.dts
> > Error: imx8mq-kontron-pitx-imx8m.dts:10.1-9 syntax error
> > FATAL ERROR: Unable to parse input tree
> >
> > It is about the includes. How can I run dtc for a intree dts to add
> > the -W option?
>
> make dtbs W=1
Ah ok. I was not aware of that.
>
> >
> > > > + compatible = "regulator-fixed";
> > > > + regulator-name = "V_3V3_SD";
> > > > + regulator-min-microvolt = <3300000>;
> > > > + regulator-max-microvolt = <3300000>;
> > > > + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> > > > + off-on-delay-us = <20000>;
> > > > + enable-active-high;
> > > > + };
> > > > + };
> > > > +
> > > > + usb_hub_reset: usb-hub-reset {
> > > > + compatible = "gpio-reset";
> > > > + reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
> > > > + reset-delay-us = <3000>;
> > > > + reset-post-delay-ms = <50>;
> > > > + #reset-cells = <0>;
> > > > + };
> > > > +
> > > > + tpm_reset: tpm-reset {
> > > > + compatible = "gpio-reset";
> > > > + reset-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
> > > > + reset-delay-us = <2>;
> > > > + reset-post-delay-ms = <60>;
> > > > + #reset-cells = <0>;
> > > > + };
> > > > +
> > > > + pcie0_refclk: pcie0-refclk {
> > >
> > > Generic node names (from the dt spec candidate is "clock").
> >
> > Should I simply set the node name to pcie0-clock? And pcie1-clock for
> > the next one?
>
> I am fine with "pcie0-clock" or just "clock-0".
I saw now that in "imx8mq-zii-ultra.dtsi" the name
"clock-pcie0-refclk" is used. Can I use the same?
>
> >
> > > > + compatible = "fixed-clock";
> > > > + #clock-cells = <0>;
> > > > + clock-frequency = <100000000>;
> > > > + };
> > > > +
> > > > + pcie1_refclk: pcie1-refclk {
> > >
> > > Same.
> > >
> > > > + compatible = "fixed-clock";
> > > > + #clock-cells = <0>;
> > > > + clock-frequency = <100000000>;
> > > > + };
> > > > +
> > > > + gpio-keys {
> > > > + compatible = "gpio-keys";
> > > > + pinctrl-names = "default";
> > > > + pinctrl-0 = <&pinctrl_gpio_keys>;
> > > > +
> > > > + pciewake {
> > > > + label = "PCIE_Wake";
> > > > + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
> > > > + linux,input-type = <4>; /* EV_MSC */
> > > > + linux,code = <3>; /* MSC_RAW */
> > > > + gpio-key,wakeup;
> > > > + };
> > > > + };
> > > > +};
> > > > +
> > > > +&ecspi2 {
> > > > + #address-cells = <1>;
> > > > + #size-cells = <0>;
> > > > + pinctrl-names = "default";
> > > > + pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
> > > > + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
> > > > + status = "okay";
> > > > +
> > > > + slb9670@0 {
> > >
> > > This needs a generic node name.
> >
> > I will change to tpm@0.
>
> Thanks.
>
> >
> > >
> > > > + compatible = "infineon,slb9670";
> > > > + reg = <0>;
> > > > + resets = <&tpm_reset>;
> > > > + spi-max-frequency = <43000000>;
> > > > + };
> > > > +};
> > > > +
> > > > +&fec1 {
> > > > + pinctrl-names = "default";
> > > > + pinctrl-0 = <&pinctrl_fec1>;
> > > > + phy-mode = "rgmii-id";
> > > > + phy-handle = <ðphy0>;
> > > > + phy-reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
> > > > + fsl,magic-packet;
> > > > + status = "okay";
> > > > +
> > > > + mdio {
> > > > + #address-cells = <1>;
> > > > + #size-cells = <0>;
> > > > +
> > > > + ethphy0: ethernet-phy@0 {
> > > > + compatible = "ethernet-phy-ieee802.3-c22";
> > > > + reg = <0>;
> > > > + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
> > > > + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
> > > > + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> > > > + };
> > > > + };
> > > > +};
> > > > +
> > > > +&i2c1 {
> > > > + clock-frequency = <400000>;
> > > > + pinctrl-names = "default";
> > > > + pinctrl-0 = <&pinctrl_i2c1>;
> > > > + status = "okay";
> > > > +
> > > > + pmic@8 {
> > > > + compatible = "fsl,pfuze100";
> > > > + fsl,pfuze-support-disable-sw;
> > > > + reg = <0x8>;
> > > > +
> > > > + regulators {
> > > > + sw1a_reg: sw1ab {
> > > > + regulator-name = "V_0V9_GPU";
> > > > + regulator-min-microvolt = <825000>;
> > > > + regulator-max-microvolt = <1100000>;
> > > > + };
> > > > +
> > > > + sw1c_reg: sw1c {
> > > > + regulator-name = "V_0V9_VPU";
> > > > + regulator-min-microvolt = <825000>;
> > > > + regulator-max-microvolt = <1100000>;
> > > > + };
> > > > +
> > > > + sw2_reg: sw2 {
> > > > + regulator-name = "V_1V1_NVCC_DRAM";
> > > > + regulator-min-microvolt = <1100000>;
> > > > + regulator-max-microvolt = <1100000>;
> > > > + regulator-always-on;
> > > > + };
> > > > +
> > > > + sw3a_reg: sw3ab {
> > > > + regulator-name = "V_1V0_DRAM";
> > > > + regulator-min-microvolt = <825000>;
> > > > + regulator-max-microvolt = <1100000>;
> > > > + regulator-always-on;
> > > > + };
> > > > +
> > > > + sw4_reg: sw4 {
> > > > + regulator-name = "V_1V8_S0";
> > > > + regulator-min-microvolt = <1800000>;
> > > > + regulator-max-microvolt = <1800000>;
> > > > + regulator-always-on;
> > > > + };
> > > > +
> > > > + swbst_reg: swbst {
> > > > + regulator-min-microvolt = <5000000>;
> > > > + regulator-max-microvolt = <5150000>;
> > > > + };
> > > > +
> > > > + snvs_reg: vsnvs {
> > > > + regulator-name = "V_0V9_SNVS";
> > > > + regulator-min-microvolt = <1000000>;
> > > > + regulator-max-microvolt = <3000000>;
> > > > + regulator-always-on;
> > > > + };
> > > > +
> > > > + vref_reg: vrefddr {
> > > > + regulator-name = "V_0V55_VREF_DDR";
> > > > + regulator-always-on;
> > > > + };
> > > > +
> > > > + vgen1_reg: vgen1 {
> > > > + regulator-name = "V_1V5_CSI";
> > > > + regulator-min-microvolt = <800000>;
> > > > + regulator-max-microvolt = <1550000>;
> > > > + };
> > > > +
> > > > + vgen2_reg: vgen2 {
> > > > + regulator-name = "V_0V9_PHY";
> > > > + regulator-min-microvolt = <850000>;
> > > > + regulator-max-microvolt = <975000>;
> > > > + regulator-always-on;
> > > > + };
> > > > +
> > > > + vgen3_reg: vgen3 {
> > > > + regulator-name = "V_1V8_PHY";
> > > > + regulator-min-microvolt = <1675000>;
> > > > + regulator-max-microvolt = <1975000>;
> > > > + regulator-always-on;
> > > > + };
> > > > +
> > > > + vgen4_reg: vgen4 {
> > > > + regulator-name = "V_1V8_VDDA";
> > > > + regulator-min-microvolt = <1625000>;
> > > > + regulator-max-microvolt = <1875000>;
> > > > + regulator-always-on;
> > > > + };
> > > > +
> > > > + vgen5_reg: vgen5 {
> > > > + regulator-name = "V_3V3_PHY";
> > > > + regulator-min-microvolt = <3075000>;
> > > > + regulator-max-microvolt = <3625000>;
> > > > + regulator-always-on;
> > > > + };
> > > > +
> > > > + vgen6_reg: vgen6 {
> > > > + regulator-name = "V_2V8_CAM";
> > > > + regulator-min-microvolt = <1800000>;
> > > > + regulator-max-microvolt = <3300000>;
> > > > + regulator-always-on;
> > > > + };
> > > > + };
> > > > + };
> > > > +
> > > > + max6650@1b {
> > >
> > > Generic node name.
> >
> > I could not find a matching name like "fan" in the devicetree
> > specification. What about using "fan-ctrl"?
>
> So maybe "fan-controller"?
I will use that name.
>
> >
> > >
> > > > + compatible = "maxim,max6650";
> > > > + reg = <0x1b>;
> > > > + maxim,fan-microvolt = <5000000>;
> > > > + };
> > > > +
> > > > + rtc@32 {
> > > > + compatible = "microcrystal,rv8803";
> > > > + reg = <0x32>;
> > > > + };
> > > > +
> > > > + lm75@4b {
> > >
> > > Node name: sensor.
> >
> > Ok
> >
> > >
> > > > + compatible = "national,lm75b";
> > > > + reg = <0x4b>;
> > > > + };
> > > > +
> > > > + eeprom@51 {
> > > > + compatible = "atmel,24c32";
> > > > + reg = <0x51>;
> > > > + pagesize = <32>;
> > > > + };
> > > > +};
> > > > +
> > > > +&i2c2 {
> > > > + clock-frequency = <100000>;
> > > > + pinctrl-names = "default";
> > > > + pinctrl-0 = <&pinctrl_i2c2>;
> > > > + status = "okay";
> > > > +};
> > > > +
> > > > +&i2c3 {
> > > > + clock-frequency = <100000>;
> > > > + pinctrl-names = "default";
> > > > + pinctrl-0 = <&pinctrl_i2c3>;
> > > > + status = "okay";
> > > > +
> > > > + wm8904: audio-codec@1a {
> > > > + compatible = "wlf,wm8904";
> > > > + reg = <0x1a>;
> > > > + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
> > > > + clock-names = "mclk";
> > > > + clock-frequency = <24000000>;
> > > > + };
> > > > +};
> > > > +
> > > > +/* M.2 B-key slot */
> > > > +&pcie0 {
> > > > + pinctrl-names = "default";
> > > > + pinctrl-0 = <&pinctrl_pcie0>;
> > > > + disable-gpio = <&gpio5 29 GPIO_ACTIVE_LOW>;
> > > > + reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
> > > > + clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
> > > > + <&clk IMX8MQ_CLK_PCIE1_AUX>,
> > > > + <&clk IMX8MQ_CLK_PCIE1_PHY>,
> > > > + <&pcie0_refclk>;
> > > > + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> > > > + ext_osc = <1>;
> > > > + status = "okay";
> > > > +};
> > > > +
> > > > +/* Intel Ethernet Controller I210/I211 */
> > > > +&pcie1 {
> > > > + clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
> > > > + <&clk IMX8MQ_CLK_PCIE2_AUX>,
> > > > + <&clk IMX8MQ_CLK_PCIE2_PHY>,
> > > > + <&pcie1_refclk>;
> > > > + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> > > > + ext_osc = <1>;
> > > > + fsl,max-link-speed = <1>;
> > > > + status = "okay";
> > > > +};
> > > > +
> > > > +&pgc_gpu {
> > > > + power-supply = <&sw1a_reg>;
> > > > +};
> > > > +
> > > > +&pgc_vpu {
> > > > + power-supply = <&sw1c_reg>;
> > > > +};
> > > > +
> > > > +&qspi0 {
> > > > + pinctrl-names = "default";
> > > > + pinctrl-0 = <&pinctrl_qspi>;
> > > > + status = "okay";
> > > > +
> > > > + flash@0 {
> > > > + compatible = "jedec,spi-nor";
> > > > + #address-cells = <1>;
> > > > + #size-cells = <1>;
> > > > + reg = <0>;
> > > > + spi-tx-bus-width = <4>;
> > > > + spi-rx-bus-width = <4>;
> > > > + m25p,fast-read;
> > > > + spi-max-frequency = <50000000>;
> > > > + };
> > > > +};
> > > > +
> > > > +&snvs_pwrkey {
> > > > + status = "okay";
> > > > +};
> > > > +
> > > > +&uart1 {
> > > > + pinctrl-names = "default";
> > > > + pinctrl-0 = <&pinctrl_uart1>;
> > > > + assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
> > > > + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
> > > > + status = "okay";
> > > > +};
> > > > +
> > > > +&uart2 {
> > > > + pinctrl-names = "default";
> > > > + pinctrl-0 = <&pinctrl_uart2>;
> > > > + assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
> > > > + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
> > > > + status = "okay";
> > > > +};
> > > > +
> > > > +&uart3 {
> > > > + pinctrl-names = "default";
> > > > + pinctrl-0 = <&pinctrl_uart3>;
> > > > + fsl,uart-has-rtscts;
> > > > + assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
> > > > + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
> > > > + status = "okay";
> > > > +};
> > > > +
> > > > +&usb_dwc3_0 {
> > > > + pinctrl-names = "default";
> > > > + pinctrl-0 = <&pinctrl_usb0>;
> > > > + dr_mode = "otg";
> > > > + hnp-disable;
> > > > + srp-disable;
> > > > + adp-disable;
> > > > + maximum-speed = "high-speed";
> > > > + status = "okay";
> > > > +};
> > > > +
> > > > +&usb3_phy0 {
> > > > + status = "okay";
> > > > +};
> > > > +
> > > > +&usb_dwc3_1 {
> > > > + resets = <&usb_hub_reset>;
> > > > + dr_mode = "host";
> > > > + status = "okay";
> > > > +};
> > > > +
> > > > +&usb3_phy1 {
> > > > + status = "okay";
> > > > +};
> > > > +
> > > > +&usdhc1 {
> > > > + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
> > > > + assigned-clock-rates = <400000000>;
> > > > + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> > > > + pinctrl-0 = <&pinctrl_usdhc1>;
> > > > + pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> > > > + pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> > > > + vqmmc-supply = <&sw4_reg>;
> > > > + bus-width = <8>;
> > > > + non-removable;
> > > > + no-sd;
> > > > + no-sdio;
> > > > + status = "okay";
> > > > +};
> > > > +
> > > > +&usdhc2 {
> > > > + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
> > > > + assigned-clock-rates = <200000000>;
> > > > + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> > > > + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> > > > + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
> > > > + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
> > > > + bus-width = <4>;
> > > > + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> > > > + wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
> > > > + vmmc-supply = <®_usdhc2_vmmc>;
> > > > + status = "okay";
> > > > +};
> > > > +
> > > > +&wdog1 {
> > > > + pinctrl-names = "default";
> > > > + pinctrl-0 = <&pinctrl_wdog>;
> > > > + fsl,ext-reset-output;
> > > > + status = "okay";
> > > > +};
> > > > +
> > > > +&iomuxc {
> > > > + pinctrl-names = "default";
> > > > + pinctrl-0 = <&pinctrl_hog>;
> > > > +
> > > > + pinctrl_hog: hoggrp {
> > > > + fsl,pins = <
> > > > + MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 /* TPM Reset */
> > > > + MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19 /* USB2 Hub Reset */
> > > > + >;
> > > > + };
> > > > +
> > > > + pinctrl_gpio: gpiogrp {
> > > > + fsl,pins = <
> > > > + MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 /* GPIO0 */
> > > > + MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19 /* GPIO1 */
> > > > + MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17 0x19 /* GPIO2 */
> > > > + MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18 0x19 /* GPIO3 */
> > > > + MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 /* GPIO4 */
> > > > + MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x19 /* GPIO5 */
> > > > + MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x19 /* GPIO6 */
> > > > + MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x19 /* GPIO7 */
> > > > + >;
> > > > + };
> > > > +
> > > > + pinctrl_pcie0: pcie0grp {
> > > > + fsl,pins = <
> > > > + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x16 /* PCIE_PERST */
> > > > + MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29 0x16 /* W_DISABLE */
> > > > + >;
> > > > + };
> > > > +
> > > > + pinctrl_gpio_keys: gpio-keysgrp {
> > > > + fsl,pins = <
> > > > + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x16 /* PCIE_WAKE */
> > > > + >;
> > > > + };
> > > > +
> > > > + pinctrl_fec1: fec1grp {
> > > > + fsl,pins = <
> > > > + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
> > > > + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23
> > > > + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
> > > > + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
> > > > + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
> > > > + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
> > > > + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
> > > > + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
> > > > + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
> > > > + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
> > > > + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
> > > > + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
> > > > + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
> > > > + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
> > > > + MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x16
> > > > + MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x16
> > > > + >;
> > > > + };
> > > > +
> > > > + pinctrl_i2c1: i2c1grp {
> > > > + fsl,pins = <
> > > > + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
> > > > + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
> > > > + >;
> > > > + };
> > > > +
> > > > + pinctrl_i2c2: i2c2grp {
> > > > + fsl,pins = <
> > > > + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f
> > > > + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f
> > > > + >;
> > > > + };
> > > > +
> > > > + pinctrl_i2c3: i2c3grp {
> > > > + fsl,pins = <
> > > > + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f
> > > > + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f
> > > > + >;
> > > > + };
> > > > +
> > > > + pinctrl_qspi: qspigrp {
> > > > + fsl,pins = <
> > > > + MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82
> > > > + MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82
> > > > + MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82
> > > > + MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
> > > > + MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
> > > > + MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
> > > > +
> > >
> > > No need for empty line.
> >
> > Ok
> >
> > >
> > > > + >;
> > > > + };
> > > > +
> > > > + pinctrl_ecspi2: ecspi2grp {
> > > > + fsl,pins = <
> > > > + MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x19
> > > > + MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x19
> > > > + MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x19
> > > > + >;
> > > > + };
> > > > +
> > > > + pinctrl_ecspi2_cs: ecspi2cs {
> > >
> > > ecspi2csgrp to match schema
> >
> > Ok
> >
> > >
> > > Please run dtbs_check on your DTS.
> >
> > When I run "make dtbs_check" it runs quite a long time and stops with
> > an error. But as far as I can say there is an error coming from the
> > included "imx8mq.dtsi".
> >
> > You can see the output here: https://pastebin.com/raw/iU2geBDh
>
> Looks fine (except the error tool :) ).
What do you mean with error tool?
Thank you
--
Heiko
Hi Krzysztof,
Am Mo., 22. Feb. 2021 um 19:39 Uhr schrieb Krzysztof Kozlowski
<[email protected]>:
>
> On Mon, 22 Feb 2021 at 10:09, Heiko Thiery <[email protected]> wrote:
> > > > > > +
> > > > > > + pcie0_refclk: pcie0-refclk {
> > > > >
> > > > > Generic node names (from the dt spec candidate is "clock").
> > > >
> > > > Should I simply set the node name to pcie0-clock? And pcie1-clock for
> > > > the next one?
> > >
> > > I am fine with "pcie0-clock" or just "clock-0".
> >
> > I saw now that in "imx8mq-zii-ultra.dtsi" the name
> > "clock-pcie0-refclk" is used. Can I use the same?
>
> It's not that generic anymore - but specific, but it's also not that
> important, so go ahead.
For me it is no problem to change this to pcie0-clock and pcie1-clock.
I need to make a new version anyway.
--
Heiko
On Mon, 22 Feb 2021 at 10:09, Heiko Thiery <[email protected]> wrote:
> > > > > +
> > > > > + pcie0_refclk: pcie0-refclk {
> > > >
> > > > Generic node names (from the dt spec candidate is "clock").
> > >
> > > Should I simply set the node name to pcie0-clock? And pcie1-clock for
> > > the next one?
> >
> > I am fine with "pcie0-clock" or just "clock-0".
>
> I saw now that in "imx8mq-zii-ultra.dtsi" the name
> "clock-pcie0-refclk" is used. Can I use the same?
It's not that generic anymore - but specific, but it's also not that
important, so go ahead.
> > >
> > > When I run "make dtbs_check" it runs quite a long time and stops with
> > > an error. But as far as I can say there is an error coming from the
> > > included "imx8mq.dtsi".
> > >
> > > You can see the output here: https://pastebin.com/raw/iU2geBDh
> >
> > Looks fine (except the error tool :) ).
>
> What do you mean with error tool?
I lost some words on the wire - I meant: "except the error from the
tool itself".
Best regards,
Krzysztof