2021-03-10 12:59:31

by Thomas Schneider

Subject: [PATCH] arm64: dts: rockchip: add infrared receiver node to rockpro64

This adds the RockPro64’s infrared receiver to its dtsi. The configuration is
almost the same as on rk3328-rock64, except for the GPIO pins, and thus adapted
from there.

Signed-off-by: Thomas Schneider <[email protected]>
---
arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 5ab0b9edfc88..d42c75c6dcbd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -36,6 +36,13 @@ power {
};
};

+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&ir_int>;
+ pinctrl-names = "default";
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -604,6 +611,12 @@ fusb0_int: fusb0-int {
};
};

+ ir {
+ ir_int: ir-int {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
leds {
work_led_pin: work-led-pin {
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
--
2.30.1

2021-03-21 22:02:18

by Heiko Stuebner

Subject: Re: [PATCH] arm64: dts: rockchip: add infrared receiver node to rockpro64

On Wed, 10 Mar 2021 13:28:21 +0100, Thomas Schneider wrote:
> This adds the RockPro64’s infrared receiver to its dtsi. The configuration is
> almost the same as on rk3328-rock64, except for the GPIO pins, and thus adapted
> from there.

Applied, thanks!

[1/1] arm64: dts: rockchip: add infrared receiver node to rockpro64
commit: 7c7f041309f73b05d21980f88f29305255e126ee

Best regards,
--
Heiko Stuebner <[email protected]>