From: Greg Kroah-Hartman <[email protected]>
This is the start of the stable review cycle for the 4.19.181 release.
There are 120 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 17 Mar 2021 13:57:02 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.181-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.19.181-rc1
Juergen Gross <[email protected]>
xen/events: avoid handling the same event on two cpus at the same time
Juergen Gross <[email protected]>
xen/events: don't unmask an event channel when an eoi is pending
Juergen Gross <[email protected]>
xen/events: reset affinity of 2-level event when tearing it down
Marc Zyngier <[email protected]>
KVM: arm64: Fix exclusive limit for IPA size
Boyang Yu <[email protected]>
hwmon: (lm90) Fix max6658 sporadic wrong temperature reading
Josh Poimboeuf <[email protected]>
x86/unwind/orc: Disable KASAN checking in the ORC unwinder, part 2
Lior Ribak <[email protected]>
binfmt_misc: fix possible deadlock in bm_register_write
Naveen N. Rao <[email protected]>
powerpc/64s: Fix instruction encoding for lis in ppc_function_entry()
Alexey Dobriyan <[email protected]>
prctl: fix PR_SET_MM_AUXV kernel stack leak
Matthew Wilcox (Oracle) <[email protected]>
include/linux/sched/mm.h: use rcu_dereference in in_vfork()
Arnd Bergmann <[email protected]>
stop_machine: mark helpers __always_inline
Anna-Maria Behnsen <[email protected]>
hrtimer: Update softirq_expires_next correctly after __hrtimer_get_next_event()
Daiyue Zhang <[email protected]>
configfs: fix a use-after-free in __configfs_open_file
Jia-Ju Bai <[email protected]>
block: rsxx: fix error return code of rsxx_pci_probe()
Ondrej Mosnacek <[email protected]>
NFSv4.2: fix return value of _nfs4_get_security_label()
Sergey Shtylyov <[email protected]>
sh_eth: fix TRSCER mask for R7S72100
Ian Abbott <[email protected]>
staging: comedi: pcl818: Fix endian problem for AI command data
Ian Abbott <[email protected]>
staging: comedi: pcl711: Fix endian problem for AI command data
Ian Abbott <[email protected]>
staging: comedi: me4000: Fix endian problem for AI command data
Ian Abbott <[email protected]>
staging: comedi: dmm32at: Fix endian problem for AI command data
Ian Abbott <[email protected]>
staging: comedi: das800: Fix endian problem for AI command data
Ian Abbott <[email protected]>
staging: comedi: das6402: Fix endian problem for AI command data
Ian Abbott <[email protected]>
staging: comedi: adv_pci1710: Fix endian problem for AI command data
Ian Abbott <[email protected]>
staging: comedi: addi_apci_1500: Fix endian problem for command sample
Ian Abbott <[email protected]>
staging: comedi: addi_apci_1032: Fix endian problem for COS sample
Lee Gibson <[email protected]>
staging: rtl8192e: Fix possible buffer overflow in _rtl92e_wx_set_scan
Lee Gibson <[email protected]>
staging: rtl8712: Fix possible buffer overflow in r8712_sitesurvey_cmd
Dan Carpenter <[email protected]>
staging: ks7010: prevent buffer overflow in ks_wlan_set_scan()
Dan Carpenter <[email protected]>
staging: rtl8188eu: fix potential memory corruption in rtw_check_beacon_data()
Dan Carpenter <[email protected]>
staging: rtl8712: unterminated string leads to read overflow
Dan Carpenter <[email protected]>
staging: rtl8188eu: prevent ->ssid overflow in rtw_wx_set_scan()
Dan Carpenter <[email protected]>
staging: rtl8192u: fix ->ssid overflow in r8192_wx_set_scan()
Shuah Khan <[email protected]>
usbip: fix vudc usbip_sockfd_store races leading to gpf
Shuah Khan <[email protected]>
usbip: fix vhci_hcd attach_store() races leading to gpf
Shuah Khan <[email protected]>
usbip: fix stub_dev usbip_sockfd_store() races leading to gpf
Shuah Khan <[email protected]>
usbip: fix vudc to check for stream socket
Shuah Khan <[email protected]>
usbip: fix vhci_hcd to check for stream socket
Shuah Khan <[email protected]>
usbip: fix stub_dev to check for stream socket
Sebastian Reichel <[email protected]>
USB: serial: cp210x: add some more GE USB IDs
Karan Singhal <[email protected]>
USB: serial: cp210x: add ID for Acuity Brands nLight Air Adapter
Niv Sardi <[email protected]>
USB: serial: ch341: add new Product ID
Pavel Skripkin <[email protected]>
USB: serial: io_edgeport: fix memory leak in edge_startup
Forest Crossman <[email protected]>
usb: xhci: Fix ASMedia ASM1042A and ASM3242 DMA addressing
Mathias Nyman <[email protected]>
xhci: Improve detection of device initiated wake signal.
Yoshihiro Shimoda <[email protected]>
usb: renesas_usbhs: Clear PIPECFG for re-enabling pipe with other EPNUM
Pete Zaitcev <[email protected]>
USB: usblp: fix a hang in poll() if disconnected
Matthias Kaehlcke <[email protected]>
usb: dwc3: qcom: Honor wakeup enabled/disabled state
Ruslan Bilovol <[email protected]>
usb: gadget: f_uac1: stop playback on function disable
Ruslan Bilovol <[email protected]>
usb: gadget: f_uac2: always increase endpoint max_packet_size by one audio slot
Dan Carpenter <[email protected]>
USB: gadget: u_ether: Fix a configfs return code
Yorick de Wid <[email protected]>
Goodix Fingerprint device is not a modem
Frank Li <[email protected]>
mmc: cqhci: Fix random crash when remove mmc module/card
Adrian Hunter <[email protected]>
mmc: core: Fix partition switch time for eMMC
Stefan Haberland <[email protected]>
s390/dasd: fix hanging IO request during DASD driver unbind
Stefan Haberland <[email protected]>
s390/dasd: fix hanging DASD driver unbind
Eric W. Biederman <[email protected]>
Revert 95ebabde382c ("capabilities: Don't allow writing ambiguous v3 file capabilities")
Takashi Iwai <[email protected]>
ALSA: usb-audio: Apply the control quirk to Plantronics headsets
Takashi Iwai <[email protected]>
ALSA: usb-audio: Fix "cannot get freq eq" errors on Dell AE515 sound bar
Takashi Iwai <[email protected]>
ALSA: hda: Avoid spurious unsol event handling during S3/S4
Takashi Iwai <[email protected]>
ALSA: hda: Drop the BATCH workaround for AMD controllers
Takashi Iwai <[email protected]>
ALSA: hda/hdmi: Cancel pending works before suspend
John Ernberg <[email protected]>
ALSA: usb: Add Plantronics C320-M USB ctrl msg delay quirk
Aleksandr Miloserdov <[email protected]>
scsi: target: core: Prevent underflow for service actions
Aleksandr Miloserdov <[email protected]>
scsi: target: core: Add cmd length set before cmd complete
Mike Christie <[email protected]>
scsi: libiscsi: Fix iscsi_prep_scsi_cmd_pdu() error handling
Heiko Carstens <[email protected]>
s390/smp: __smp_rescan_cpus() - move cpumask away from stack
Keita Suzuki <[email protected]>
i40e: Fix memory leak in i40e_probe
Geert Uytterhoeven <[email protected]>
PCI: Fix pci_register_io_range() memory leak
Krzysztof Wilczyński <[email protected]>
PCI: mediatek: Add missing of_node_put() to fix reference leak
Martin Kaiser <[email protected]>
PCI: xgene-msi: Fix race in installing chained irq handler
Khalid Aziz <[email protected]>
sparc64: Use arch_validate_flags() to validate ADI flag
Andreas Larsson <[email protected]>
sparc32: Limit memblock allocation to low memory
Athira Rajeev <[email protected]>
powerpc/perf: Record counter overflow always if SAMPLE_IP is unset
Nicholas Piggin <[email protected]>
powerpc: improve handling of unrecoverable system reset
Oliver O'Halloran <[email protected]>
powerpc/pci: Add ppc_md.discover_phbs()
Chaotian Jing <[email protected]>
mmc: mediatek: fix race condition between msdc_request_timeout and irq
Christophe JAILLET <[email protected]>
mmc: mxs-mmc: Fix a resource leak in an error handling path in 'mxs_mmc_probe()'
Steven J. Magnani <[email protected]>
udf: fix silent AED tagLocation corruption
Wolfram Sang <[email protected]>
i2c: rcar: optimize cacheline to minimize HW race condition
Guangbin Huang <[email protected]>
net: phy: fix save wrong speed and duplex problem if autoneg is on
Biju Das <[email protected]>
media: v4l: vsp1: Fix bru null pointer access
Biju Das <[email protected]>
media: v4l: vsp1: Fix uif null pointer access
Maxim Mikityanskiy <[email protected]>
media: usbtv: Fix deadlock on suspend
Sergey Shtylyov <[email protected]>
sh_eth: fix TRSCER mask for R7S9210
Eric Farman <[email protected]>
s390/cio: return -EFAULT if copy_to_user() fails
Artem Lapkin <[email protected]>
drm: meson_drv add shutdown function
Daniel Vetter <[email protected]>
drm/compat: Clear bounce structures
Wang Qing <[email protected]>
s390/cio: return -EFAULT if copy_to_user() fails again
Ian Rogers <[email protected]>
perf traceevent: Ensure read cmdlines are null terminated.
Danielle Ratson <[email protected]>
selftests: forwarding: Fix race condition in mirror installation
Joakim Zhang <[email protected]>
net: stmmac: fix watchdog timeout during suspend/resume stress test
Joakim Zhang <[email protected]>
net: stmmac: stop each tx channel independently
Jia-Ju Bai <[email protected]>
net: qrtr: fix error return code of qrtr_sendmsg()
Paul Cercueil <[email protected]>
net: davicom: Fix regulator not turned off on driver removal
Paul Cercueil <[email protected]>
net: davicom: Fix regulator not turned off on failed probe
Xie He <[email protected]>
net: lapbether: Remove netif_start_queue / netif_stop_queue
Paul Moore <[email protected]>
cipso,calipso: resolve a number of problems with the DOI refcounts
Daniele Palmas <[email protected]>
net: usb: qmi_wwan: allow qmimux add/del with master up
Maximilian Heyne <[email protected]>
net: sched: avoid duplicates in classes dump
Ong Boon Leong <[email protected]>
net: stmmac: fix incorrect DMA channel intr enable setting of EQoS v4.10
Kevin(Yudong) Yang <[email protected]>
net/mlx4_en: update moderation when config reset
Balazs Nemeth <[email protected]>
net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0
Balazs Nemeth <[email protected]>
net: check if protocol extracted by virtio_net_hdr_set_proto is correct
Sergey Shtylyov <[email protected]>
sh_eth: fix TRSCER mask for SH771x
Linus Torvalds <[email protected]>
Revert "mm, slub: consider rest of partial list if acquire_slab() fails"
Joe Lawrence <[email protected]>
scripts/recordmcount.{c,pl}: support -ffunction-sections .text.* section names
Paulo Alcantara <[email protected]>
cifs: return proper error code in statfs(2)
Eric Dumazet <[email protected]>
tcp: add sanity tests to TCP_QUEUE_SEQ
Eric Dumazet <[email protected]>
tcp: annotate tp->write_seq lockless reads
Eric Dumazet <[email protected]>
tcp: annotate tp->copied_seq lockless reads
Lorenzo Bianconi <[email protected]>
mt76: dma: do not report truncated frames to mac80211
Vasily Averin <[email protected]>
netfilter: x_tables: gpf inside xt_find_revision()
Joakim Zhang <[email protected]>
can: flexcan: enable RX FIFO after FRZ/HALT valid
Joakim Zhang <[email protected]>
can: flexcan: assert FRZ bit in flexcan_chip_freeze()
Oleksij Rempel <[email protected]>
can: skb: can_skb_set_owner(): fix ref counting if socket was closed before setting skb ownership
Maxim Mikityanskiy <[email protected]>
net: Introduce parse_protocol header_ops callback
Daniel Borkmann <[email protected]>
net: Fix gro aggregation for udp encaps with zero csum
Felix Fietkau <[email protected]>
ath9k: fix transmitting to stations in dynamic SMPS mode
Jakub Kicinski <[email protected]>
ethernet: alx: fix order of calls on resume
Dmitry V. Levin <[email protected]>
uapi: nfnetlink_cthelper.h: fix userspace compilation error
-------------
Diffstat:
Makefile | 4 +-
arch/powerpc/include/asm/code-patching.h | 2 +-
arch/powerpc/include/asm/machdep.h | 3 +
arch/powerpc/kernel/pci-common.c | 10 ++
arch/powerpc/kernel/traps.c | 5 +-
arch/powerpc/perf/core-book3s.c | 19 ++-
arch/s390/kernel/smp.c | 2 +-
arch/sparc/include/asm/mman.h | 54 +++++----
arch/sparc/mm/init_32.c | 3 +
arch/x86/kernel/unwind_orc.c | 12 +-
drivers/block/rsxx/core.c | 1 +
drivers/gpu/drm/drm_ioc32.c | 11 ++
drivers/gpu/drm/meson/meson_drv.c | 11 ++
drivers/hwmon/lm90.c | 42 ++++++-
drivers/i2c/busses/i2c-rcar.c | 2 +-
drivers/media/platform/vsp1/vsp1_drm.c | 6 +-
drivers/media/usb/usbtv/usbtv-audio.c | 2 +-
drivers/mmc/core/bus.c | 11 +-
drivers/mmc/core/mmc.c | 15 ++-
drivers/mmc/host/mtk-sd.c | 18 +--
drivers/mmc/host/mxs-mmc.c | 2 +-
drivers/net/can/flexcan.c | 12 +-
drivers/net/ethernet/atheros/alx/main.c | 7 +-
drivers/net/ethernet/davicom/dm9000.c | 21 +++-
drivers/net/ethernet/intel/i40e/i40e_main.c | 2 +
drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 2 +-
drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 2 +
drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 +
drivers/net/ethernet/renesas/sh_eth.c | 7 ++
drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 19 ++-
drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c | 4 -
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +
drivers/net/phy/phy.c | 7 +-
drivers/net/usb/qmi_wwan.c | 14 ---
drivers/net/wan/lapbether.c | 3 -
drivers/net/wireless/ath/ath9k/ath9k.h | 3 +-
drivers/net/wireless/ath/ath9k/xmit.c | 6 +
drivers/net/wireless/mediatek/mt76/dma.c | 11 +-
drivers/pci/controller/pci-xgene-msi.c | 10 +-
drivers/pci/controller/pcie-mediatek.c | 7 +-
drivers/pci/pci.c | 4 +
drivers/s390/block/dasd.c | 6 +-
drivers/s390/cio/vfio_ccw_ops.c | 6 +-
drivers/scsi/libiscsi.c | 11 +-
drivers/staging/comedi/drivers/addi_apci_1032.c | 4 +-
drivers/staging/comedi/drivers/addi_apci_1500.c | 18 +--
drivers/staging/comedi/drivers/adv_pci1710.c | 10 +-
drivers/staging/comedi/drivers/das6402.c | 2 +-
drivers/staging/comedi/drivers/das800.c | 2 +-
drivers/staging/comedi/drivers/dmm32at.c | 2 +-
drivers/staging/comedi/drivers/me4000.c | 2 +-
drivers/staging/comedi/drivers/pcl711.c | 2 +-
drivers/staging/comedi/drivers/pcl818.c | 2 +-
drivers/staging/ks7010/ks_wlan_net.c | 6 +-
drivers/staging/rtl8188eu/core/rtw_ap.c | 5 +
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c | 6 +-
drivers/staging/rtl8192e/rtl8192e/rtl_wx.c | 7 +-
drivers/staging/rtl8192u/r8192U_wx.c | 6 +-
drivers/staging/rtl8712/rtl871x_cmd.c | 6 +-
drivers/staging/rtl8712/rtl871x_ioctl_linux.c | 2 +-
drivers/target/target_core_pr.c | 15 ++-
drivers/target/target_core_transport.c | 15 ++-
drivers/usb/class/cdc-acm.c | 5 +
drivers/usb/class/usblp.c | 16 ++-
drivers/usb/dwc3/dwc3-qcom.c | 7 +-
drivers/usb/gadget/function/f_uac1.c | 1 +
drivers/usb/gadget/function/f_uac2.c | 2 +-
drivers/usb/gadget/function/u_ether_configfs.h | 5 +-
drivers/usb/host/xhci-pci.c | 8 +-
drivers/usb/host/xhci.c | 16 ++-
drivers/usb/renesas_usbhs/pipe.c | 2 +
drivers/usb/serial/ch341.c | 1 +
drivers/usb/serial/cp210x.c | 3 +
drivers/usb/serial/io_edgeport.c | 26 ++--
drivers/usb/usbip/stub_dev.c | 42 +++++--
drivers/usb/usbip/vhci_sysfs.c | 39 +++++-
drivers/usb/usbip/vudc_sysfs.c | 50 ++++++--
drivers/xen/events/events_2l.c | 22 ++--
drivers/xen/events/events_base.c | 132 +++++++++++++++------
drivers/xen/events/events_fifo.c | 7 --
drivers/xen/events/events_internal.h | 22 ++--
fs/binfmt_misc.c | 29 +++--
fs/cifs/cifsfs.c | 2 +-
fs/configfs/file.c | 6 +-
fs/nfs/nfs4proc.c | 2 +-
fs/udf/inode.c | 9 +-
include/linux/can/skb.h | 8 +-
include/linux/netdevice.h | 10 ++
include/linux/sched/mm.h | 3 +-
include/linux/stop_machine.h | 11 +-
include/linux/virtio_net.h | 7 +-
include/net/tcp.h | 2 +-
include/target/target_core_backend.h | 1 +
include/uapi/linux/netfilter/nfnetlink_cthelper.h | 2 +-
kernel/sys.c | 2 +-
kernel/time/hrtimer.c | 60 ++++++----
lib/logic_pio.c | 3 +
mm/slub.c | 2 +-
net/ipv4/cipso_ipv4.c | 11 +-
net/ipv4/tcp.c | 59 +++++----
net/ipv4/tcp_diag.c | 5 +-
net/ipv4/tcp_input.c | 6 +-
net/ipv4/tcp_ipv4.c | 23 ++--
net/ipv4/tcp_minisocks.c | 4 +-
net/ipv4/tcp_output.c | 6 +-
net/ipv4/udp_offload.c | 2 +-
net/ipv6/calipso.c | 14 +--
net/ipv6/tcp_ipv6.c | 15 +--
net/mpls/mpls_gso.c | 3 +
net/netfilter/x_tables.c | 6 +-
net/netlabel/netlabel_cipso_v4.c | 3 +
net/qrtr/qrtr.c | 4 +-
net/sched/sch_api.c | 8 +-
scripts/recordmcount.c | 2 +-
scripts/recordmcount.pl | 13 ++
security/commoncap.c | 12 +-
sound/pci/hda/hda_bind.c | 4 +
sound/pci/hda/hda_controller.c | 7 --
sound/pci/hda/patch_hdmi.c | 13 ++
sound/usb/quirks.c | 9 ++
tools/perf/util/trace-event-read.c | 1 +
.../net/forwarding/mirror_gre_bridge_1d_vlan.sh | 9 ++
virt/kvm/arm/mmu.c | 2 +-
123 files changed, 892 insertions(+), 428 deletions(-)
From: Greg Kroah-Hartman <[email protected]>
From: Maxim Mikityanskiy <[email protected]>
commit e78b2915517e8fcadb1bc130ad6aeac7099e510c upstream.
Introduce a new optional header_ops callback called parse_protocol and a
wrapper function dev_parse_header_protocol, similar to dev_parse_header.
The new callback's purpose is to extract the protocol number from the L2
header, the format of which is known to the driver, but not to the upper
layers of the stack.
Signed-off-by: Maxim Mikityanskiy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/netdevice.h | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -274,6 +274,7 @@ struct header_ops {
const struct net_device *dev,
const unsigned char *haddr);
bool (*validate)(const char *ll_header, unsigned int len);
+ __be16 (*parse_protocol)(const struct sk_buff *skb);
};
/* These flag bits are private to the generic network queueing
@@ -2895,6 +2896,15 @@ static inline int dev_parse_header(const
return dev->header_ops->parse(skb, haddr);
}
+static inline __be16 dev_parse_header_protocol(const struct sk_buff *skb)
+{
+ const struct net_device *dev = skb->dev;
+
+ if (!dev->header_ops || !dev->header_ops->parse_protocol)
+ return 0;
+ return dev->header_ops->parse_protocol(skb);
+}
+
/* ll_header must have at least hard_header_len allocated */
static inline bool dev_validate_header(const struct net_device *dev,
char *ll_header, int len)
From: Greg Kroah-Hartman <[email protected]>
From: Felix Fietkau <[email protected]>
commit 3b9ea7206d7e1fdd7419cbd10badd3b2c80d04b4 upstream.
When transmitting to a receiver in dynamic SMPS mode, all transmissions that
use multiple spatial streams need to be sent using CTS-to-self or RTS/CTS to
give the receiver's extra chains some time to wake up.
This fixes the tx rate getting stuck at <= MCS7 for some clients, especially
Intel ones, which make aggressive use of SMPS.
Cc: [email protected]
Reported-by: Martin Kennedy <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath9k/ath9k.h | 3 ++-
drivers/net/wireless/ath/ath9k/xmit.c | 6 ++++++
2 files changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -179,7 +179,8 @@ struct ath_frame_info {
s8 txq;
u8 keyix;
u8 rtscts_rate;
- u8 retries : 7;
+ u8 retries : 6;
+ u8 dyn_smps : 1;
u8 baw_tracked : 1;
u8 tx_power;
enum ath9k_key_type keytype:2;
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1324,6 +1324,11 @@ static void ath_buf_set_rate(struct ath_
is_40, is_sgi, is_sp);
if (rix < 8 && (tx_info->flags & IEEE80211_TX_CTL_STBC))
info->rates[i].RateFlags |= ATH9K_RATESERIES_STBC;
+ if (rix >= 8 && fi->dyn_smps) {
+ info->rates[i].RateFlags |=
+ ATH9K_RATESERIES_RTS_CTS;
+ info->flags |= ATH9K_TXDESC_CTSENA;
+ }
info->txpower[i] = ath_get_rate_txpower(sc, bf, rix,
is_40, false);
@@ -2206,6 +2211,7 @@ static void setup_frame_info(struct ieee
fi->keyix = an->ps_key;
else
fi->keyix = ATH9K_TXKEYIX_INVALID;
+ fi->dyn_smps = sta && sta->smps_mode == IEEE80211_SMPS_DYNAMIC;
fi->keytype = keytype;
fi->framelen = framelen;
fi->tx_power = txpower;
From: Greg Kroah-Hartman <[email protected]>
From: Lorenzo Bianconi <[email protected]>
commit d0bd52c591a1070c54dc428e926660eb4f981099 upstream.
Commit b102f0c522cf6 ("mt76: fix array overflow on receiving too many
fragments for a packet") fixes a possible OOB access but it introduces a
memory leak since the pending frame is not released to page_frag_cache
if the frag array of skb_shared_info is full. Commit 93a1d4791c10
("mt76: dma: fix a possible memory leak in mt76_add_fragment()") fixes
the issue but does not free the truncated skb that is forwarded to
mac80211 layer. Fix the leftover issue discarding even truncated skbs.
Fixes: 93a1d4791c10 ("mt76: dma: fix a possible memory leak in mt76_add_fragment()")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/a03166fcc8214644333c68674a781836e0f57576.1612697217.git.lorenzo@kernel.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/mediatek/mt76/dma.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/drivers/net/wireless/mediatek/mt76/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/dma.c
@@ -395,13 +395,13 @@ mt76_add_fragment(struct mt76_dev *dev,
{
struct sk_buff *skb = q->rx_head;
struct skb_shared_info *shinfo = skb_shinfo(skb);
+ int nr_frags = shinfo->nr_frags;
- if (shinfo->nr_frags < ARRAY_SIZE(shinfo->frags)) {
+ if (nr_frags < ARRAY_SIZE(shinfo->frags)) {
struct page *page = virt_to_head_page(data);
int offset = data - page_address(page) + q->buf_offset;
- skb_add_rx_frag(skb, shinfo->nr_frags, page, offset, len,
- q->buf_size);
+ skb_add_rx_frag(skb, nr_frags, page, offset, len, q->buf_size);
} else {
skb_free_frag(data);
}
@@ -410,7 +410,10 @@ mt76_add_fragment(struct mt76_dev *dev,
return;
q->rx_head = NULL;
- dev->drv->rx_skb(dev, q - dev->q_rx, skb);
+ if (nr_frags < ARRAY_SIZE(shinfo->frags))
+ dev->drv->rx_skb(dev, q - dev->q_rx, skb);
+ else
+ dev_kfree_skb(skb);
}
static int
From: Greg Kroah-Hartman <[email protected]>
From: Daniel Borkmann <[email protected]>
commit 89e5c58fc1e2857ccdaae506fb8bc5fed57ee063 upstream.
We noticed a GRO issue for UDP-based encaps such as vxlan/geneve when the
csum for the UDP header itself is 0. In that case, GRO aggregation does
not take place on the phys dev, but instead is deferred to the vxlan/geneve
driver (see trace below).
The reason is essentially that GRO aggregation bails out in udp_gro_receive()
for such case when drivers marked the skb with CHECKSUM_UNNECESSARY (ice, i40e,
others) where for non-zero csums 2abb7cdc0dc8 ("udp: Add support for doing
checksum unnecessary conversion") promotes those skbs to CHECKSUM_COMPLETE
and napi context has csum_valid set. This is however not the case for zero
UDP csum (here: csum_cnt is still 0 and csum_valid continues to be false).
At the same time 57c67ff4bd92 ("udp: additional GRO support") added matches
on !uh->check ^ !uh2->check as part to determine candidates for aggregation,
so it certainly is expected to handle zero csums in udp_gro_receive(). The
purpose of the check added via 662880f44203 ("net: Allow GRO to use and set
levels of checksum unnecessary") seems to catch bad csum and stop aggregation
right away.
One way to fix aggregation in the zero case is to only perform the !csum_valid
check in udp_gro_receive() if uh->check is infact non-zero.
Before:
[...]
swapper 0 [008] 731.946506: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100400 len=1500 (1)
swapper 0 [008] 731.946507: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100200 len=1500
swapper 0 [008] 731.946507: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101100 len=1500
swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101700 len=1500
swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101b00 len=1500
swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100600 len=1500
swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100f00 len=1500
swapper 0 [008] 731.946509: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100a00 len=1500
swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100500 len=1500
swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100700 len=1500
swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101d00 len=1500 (2)
swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101000 len=1500
swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101c00 len=1500
swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101400 len=1500
swapper 0 [008] 731.946518: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100e00 len=1500
swapper 0 [008] 731.946518: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101600 len=1500
swapper 0 [008] 731.946521: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100800 len=774
swapper 0 [008] 731.946530: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff966497100400 len=14032 (1)
swapper 0 [008] 731.946530: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff966497101d00 len=9112 (2)
[...]
# netperf -H 10.55.10.4 -t TCP_STREAM -l 20
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.55.10.4 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 16384 16384 20.01 13129.24
After:
[...]
swapper 0 [026] 521.862641: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d479000 len=11286 (1)
swapper 0 [026] 521.862643: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d479000 len=11236 (1)
swapper 0 [026] 521.862650: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d478500 len=2898 (2)
swapper 0 [026] 521.862650: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d479f00 len=8490 (3)
swapper 0 [026] 521.862653: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d478500 len=2848 (2)
swapper 0 [026] 521.862653: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d479f00 len=8440 (3)
[...]
# netperf -H 10.55.10.4 -t TCP_STREAM -l 20
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.55.10.4 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 16384 16384 20.01 24576.53
Fixes: 57c67ff4bd92 ("udp: additional GRO support")
Fixes: 662880f44203 ("net: Allow GRO to use and set levels of checksum unnecessary")
Signed-off-by: Daniel Borkmann <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Jesse Brandeburg <[email protected]>
Cc: Tom Herbert <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/udp_offload.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv4/udp_offload.c
+++ b/net/ipv4/udp_offload.c
@@ -359,7 +359,7 @@ struct sk_buff *udp_gro_receive(struct l
struct sock *sk;
if (NAPI_GRO_CB(skb)->encap_mark ||
- (skb->ip_summed != CHECKSUM_PARTIAL &&
+ (uh->check && skb->ip_summed != CHECKSUM_PARTIAL &&
NAPI_GRO_CB(skb)->csum_cnt == 0 &&
!NAPI_GRO_CB(skb)->csum_valid))
goto out;
From: Greg Kroah-Hartman <[email protected]>
From: Joakim Zhang <[email protected]>
commit ec15e27cc8904605846a354bb1f808ea1432f853 upstream.
RX FIFO enable failed could happen when do system reboot stress test:
[ 0.303958] flexcan 5a8d0000.can: 5a8d0000.can supply xceiver not found, using dummy regulator
[ 0.304281] flexcan 5a8d0000.can (unnamed net_device) (uninitialized): Could not enable RX FIFO, unsupported core
[ 0.314640] flexcan 5a8d0000.can: registering netdev failed
[ 0.320728] flexcan 5a8e0000.can: 5a8e0000.can supply xceiver not found, using dummy regulator
[ 0.320991] flexcan 5a8e0000.can (unnamed net_device) (uninitialized): Could not enable RX FIFO, unsupported core
[ 0.331360] flexcan 5a8e0000.can: registering netdev failed
[ 0.337444] flexcan 5a8f0000.can: 5a8f0000.can supply xceiver not found, using dummy regulator
[ 0.337716] flexcan 5a8f0000.can (unnamed net_device) (uninitialized): Could not enable RX FIFO, unsupported core
[ 0.348117] flexcan 5a8f0000.can: registering netdev failed
RX FIFO should be enabled after the FRZ/HALT are valid. But the current
code enable RX FIFO and FRZ/HALT at the same time.
Fixes: e955cead03117 ("CAN: Add Flexcan CAN controller driver")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joakim Zhang <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/flexcan.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -1252,10 +1252,14 @@ static int register_flexcandev(struct ne
if (err)
goto out_chip_disable;
- /* set freeze, halt and activate FIFO, restrict register access */
+ /* set freeze, halt */
+ err = flexcan_chip_freeze(priv);
+ if (err)
+ goto out_chip_disable;
+
+ /* activate FIFO, restrict register access */
reg = priv->read(®s->mcr);
- reg |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_HALT |
- FLEXCAN_MCR_FEN | FLEXCAN_MCR_SUPV;
+ reg |= FLEXCAN_MCR_FEN | FLEXCAN_MCR_SUPV;
priv->write(reg, ®s->mcr);
/* Currently we only support newer versions of this core
From: Greg Kroah-Hartman <[email protected]>
From: Eric Dumazet <[email protected]>
[ Upstream commit 8811f4a9836e31c14ecdf79d9f3cb7c5d463265d ]
Qingyu Li reported a syzkaller bug where the repro
changes RCV SEQ _after_ restoring data in the receive queue.
mprotect(0x4aa000, 12288, PROT_READ) = 0
mmap(0x1ffff000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x1ffff000
mmap(0x20000000, 16777216, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x20000000
mmap(0x21000000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x21000000
socket(AF_INET6, SOCK_STREAM, IPPROTO_IP) = 3
setsockopt(3, SOL_TCP, TCP_REPAIR, [1], 4) = 0
connect(3, {sa_family=AF_INET6, sin6_port=htons(0), sin6_flowinfo=htonl(0), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_scope_id=0}, 28) = 0
setsockopt(3, SOL_TCP, TCP_REPAIR_QUEUE, [1], 4) = 0
sendmsg(3, {msg_name=NULL, msg_namelen=0, msg_iov=[{iov_base="0x0000000000000003\0\0", iov_len=20}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20
setsockopt(3, SOL_TCP, TCP_REPAIR, [0], 4) = 0
setsockopt(3, SOL_TCP, TCP_QUEUE_SEQ, [128], 4) = 0
recvfrom(3, NULL, 20, 0, NULL, NULL) = -1 ECONNRESET (Connection reset by peer)
syslog shows:
[ 111.205099] TCP recvmsg seq # bug 2: copied 80, seq 0, rcvnxt 80, fl 0
[ 111.207894] WARNING: CPU: 1 PID: 356 at net/ipv4/tcp.c:2343 tcp_recvmsg_locked+0x90e/0x29a0
This should not be allowed. TCP_QUEUE_SEQ should only be used
when queues are empty.
This patch fixes this case, and the tx path as well.
Fixes: ee9952831cfd ("tcp: Initial repair mode")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Pavel Emelyanov <[email protected]>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=212005
Reported-by: Qingyu Li <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/tcp.c | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2886,16 +2886,23 @@ static int do_tcp_setsockopt(struct sock
break;
case TCP_QUEUE_SEQ:
- if (sk->sk_state != TCP_CLOSE)
+ if (sk->sk_state != TCP_CLOSE) {
err = -EPERM;
- else if (tp->repair_queue == TCP_SEND_QUEUE)
- WRITE_ONCE(tp->write_seq, val);
- else if (tp->repair_queue == TCP_RECV_QUEUE) {
- WRITE_ONCE(tp->rcv_nxt, val);
- WRITE_ONCE(tp->copied_seq, val);
- }
- else
+ } else if (tp->repair_queue == TCP_SEND_QUEUE) {
+ if (!tcp_rtx_queue_empty(sk))
+ err = -EPERM;
+ else
+ WRITE_ONCE(tp->write_seq, val);
+ } else if (tp->repair_queue == TCP_RECV_QUEUE) {
+ if (tp->rcv_nxt != tp->copied_seq) {
+ err = -EPERM;
+ } else {
+ WRITE_ONCE(tp->rcv_nxt, val);
+ WRITE_ONCE(tp->copied_seq, val);
+ }
+ } else {
err = -EINVAL;
+ }
break;
case TCP_REPAIR_OPTIONS:
From: Greg Kroah-Hartman <[email protected]>
From: Vasily Averin <[email protected]>
commit 8e24edddad152b998b37a7f583175137ed2e04a5 upstream.
nested target/match_revfn() calls work with xt[NFPROTO_UNSPEC] lists
without taking xt[NFPROTO_UNSPEC].mutex. This can race with module unload
and cause host to crash:
general protection fault: 0000 [#1]
Modules linked in: ... [last unloaded: xt_cluster]
CPU: 0 PID: 542455 Comm: iptables
RIP: 0010:[<ffffffff8ffbd518>] [<ffffffff8ffbd518>] strcmp+0x18/0x40
RDX: 0000000000000003 RSI: ffff9a5a5d9abe10 RDI: dead000000000111
R13: ffff9a5a5d9abe10 R14: ffff9a5a5d9abd8c R15: dead000000000100
(VvS: %R15 -- &xt_match, %RDI -- &xt_match.name,
xt_cluster unregister match in xt[NFPROTO_UNSPEC].match list)
Call Trace:
[<ffffffff902ccf44>] match_revfn+0x54/0xc0
[<ffffffff902ccf9f>] match_revfn+0xaf/0xc0
[<ffffffff902cd01e>] xt_find_revision+0x6e/0xf0
[<ffffffffc05a5be0>] do_ipt_get_ctl+0x100/0x420 [ip_tables]
[<ffffffff902cc6bf>] nf_getsockopt+0x4f/0x70
[<ffffffff902dd99e>] ip_getsockopt+0xde/0x100
[<ffffffff903039b5>] raw_getsockopt+0x25/0x50
[<ffffffff9026c5da>] sock_common_getsockopt+0x1a/0x20
[<ffffffff9026b89d>] SyS_getsockopt+0x7d/0xf0
[<ffffffff903cbf92>] system_call_fastpath+0x25/0x2a
Fixes: 656caff20e1 ("netfilter 04/09: x_tables: fix match/target revision lookup")
Signed-off-by: Vasily Averin <[email protected]>
Reviewed-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netfilter/x_tables.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -335,6 +335,7 @@ static int match_revfn(u8 af, const char
const struct xt_match *m;
int have_rev = 0;
+ mutex_lock(&xt[af].mutex);
list_for_each_entry(m, &xt[af].match, list) {
if (strcmp(m->name, name) == 0) {
if (m->revision > *bestp)
@@ -343,6 +344,7 @@ static int match_revfn(u8 af, const char
have_rev = 1;
}
}
+ mutex_unlock(&xt[af].mutex);
if (af != NFPROTO_UNSPEC && !have_rev)
return match_revfn(NFPROTO_UNSPEC, name, revision, bestp);
@@ -355,6 +357,7 @@ static int target_revfn(u8 af, const cha
const struct xt_target *t;
int have_rev = 0;
+ mutex_lock(&xt[af].mutex);
list_for_each_entry(t, &xt[af].target, list) {
if (strcmp(t->name, name) == 0) {
if (t->revision > *bestp)
@@ -363,6 +366,7 @@ static int target_revfn(u8 af, const cha
have_rev = 1;
}
}
+ mutex_unlock(&xt[af].mutex);
if (af != NFPROTO_UNSPEC && !have_rev)
return target_revfn(NFPROTO_UNSPEC, name, revision, bestp);
@@ -376,12 +380,10 @@ int xt_find_revision(u8 af, const char *
{
int have_rev, best = -1;
- mutex_lock(&xt[af].mutex);
if (target == 1)
have_rev = target_revfn(af, name, revision, &best);
else
have_rev = match_revfn(af, name, revision, &best);
- mutex_unlock(&xt[af].mutex);
/* Nothing at all? Return 0 to try loading module. */
if (best == -1) {
From: Greg Kroah-Hartman <[email protected]>
From: Joakim Zhang <[email protected]>
commit 449052cfebf624b670faa040245d3feed770d22f upstream.
Assert HALT bit to enter freeze mode, there is a premise that FRZ bit is
asserted. This patch asserts FRZ bit in flexcan_chip_freeze, although
the reset value is 1b'1. This is a prepare patch, later patch will
invoke flexcan_chip_freeze() to enter freeze mode, which polling freeze
mode acknowledge.
Fixes: b1aa1c7a2165b ("can: flexcan: fix transition from and to freeze mode in chip_{,un}freeze")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joakim Zhang <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/flexcan.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -426,7 +426,7 @@ static int flexcan_chip_freeze(struct fl
u32 reg;
reg = priv->read(®s->mcr);
- reg |= FLEXCAN_MCR_HALT;
+ reg |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_HALT;
priv->write(reg, ®s->mcr);
while (timeout-- && !(priv->read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK))
From: Greg Kroah-Hartman <[email protected]>
From: Eric Dumazet <[email protected]>
[ Upstream commit 0f31746452e6793ad6271337438af8f4defb8940 ]
There are few places where we fetch tp->write_seq while
this field can change from IRQ or other cpu.
We need to add READ_ONCE() annotations, and also make
sure write sides use corresponding WRITE_ONCE() to avoid
store-tearing.
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/tcp.h | 2 +-
net/ipv4/tcp.c | 20 ++++++++++++--------
net/ipv4/tcp_diag.c | 2 +-
net/ipv4/tcp_ipv4.c | 21 ++++++++++++---------
net/ipv4/tcp_minisocks.c | 2 +-
net/ipv4/tcp_output.c | 4 ++--
net/ipv6/tcp_ipv6.c | 13 +++++++------
7 files changed, 36 insertions(+), 28 deletions(-)
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1880,7 +1880,7 @@ static inline u32 tcp_notsent_lowat(cons
static inline bool tcp_stream_memory_free(const struct sock *sk)
{
const struct tcp_sock *tp = tcp_sk(sk);
- u32 notsent_bytes = tp->write_seq - tp->snd_nxt;
+ u32 notsent_bytes = READ_ONCE(tp->write_seq) - tp->snd_nxt;
return notsent_bytes < tcp_notsent_lowat(tp);
}
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -637,7 +637,7 @@ int tcp_ioctl(struct sock *sk, int cmd,
if ((1 << sk->sk_state) & (TCPF_SYN_SENT | TCPF_SYN_RECV))
answ = 0;
else
- answ = tp->write_seq - tp->snd_una;
+ answ = READ_ONCE(tp->write_seq) - tp->snd_una;
break;
case SIOCOUTQNSD:
if (sk->sk_state == TCP_LISTEN)
@@ -646,7 +646,7 @@ int tcp_ioctl(struct sock *sk, int cmd,
if ((1 << sk->sk_state) & (TCPF_SYN_SENT | TCPF_SYN_RECV))
answ = 0;
else
- answ = tp->write_seq - tp->snd_nxt;
+ answ = READ_ONCE(tp->write_seq) - tp->snd_nxt;
break;
default:
return -ENOIOCTLCMD;
@@ -1037,7 +1037,7 @@ new_segment:
sk->sk_wmem_queued += copy;
sk_mem_charge(sk, copy);
skb->ip_summed = CHECKSUM_PARTIAL;
- tp->write_seq += copy;
+ WRITE_ONCE(tp->write_seq, tp->write_seq + copy);
TCP_SKB_CB(skb)->end_seq += copy;
tcp_skb_pcount_set(skb, 0);
@@ -1391,7 +1391,7 @@ new_segment:
if (!copied)
TCP_SKB_CB(skb)->tcp_flags &= ~TCPHDR_PSH;
- tp->write_seq += copy;
+ WRITE_ONCE(tp->write_seq, tp->write_seq + copy);
TCP_SKB_CB(skb)->end_seq += copy;
tcp_skb_pcount_set(skb, 0);
@@ -2556,6 +2556,7 @@ int tcp_disconnect(struct sock *sk, int
struct inet_connection_sock *icsk = inet_csk(sk);
struct tcp_sock *tp = tcp_sk(sk);
int old_state = sk->sk_state;
+ u32 seq;
if (old_state != TCP_CLOSE)
tcp_set_state(sk, TCP_CLOSE);
@@ -2593,9 +2594,12 @@ int tcp_disconnect(struct sock *sk, int
sock_reset_flag(sk, SOCK_DONE);
tp->srtt_us = 0;
tp->rcv_rtt_last_tsecr = 0;
- tp->write_seq += tp->max_window + 2;
- if (tp->write_seq == 0)
- tp->write_seq = 1;
+
+ seq = tp->write_seq + tp->max_window + 2;
+ if (!seq)
+ seq = 1;
+ WRITE_ONCE(tp->write_seq, seq);
+
tp->snd_cwnd = 2;
icsk->icsk_probes_out = 0;
tp->snd_ssthresh = TCP_INFINITE_SSTHRESH;
@@ -2885,7 +2889,7 @@ static int do_tcp_setsockopt(struct sock
if (sk->sk_state != TCP_CLOSE)
err = -EPERM;
else if (tp->repair_queue == TCP_SEND_QUEUE)
- tp->write_seq = val;
+ WRITE_ONCE(tp->write_seq, val);
else if (tp->repair_queue == TCP_RECV_QUEUE) {
WRITE_ONCE(tp->rcv_nxt, val);
WRITE_ONCE(tp->copied_seq, val);
--- a/net/ipv4/tcp_diag.c
+++ b/net/ipv4/tcp_diag.c
@@ -32,7 +32,7 @@ static void tcp_diag_get_info(struct soc
r->idiag_rqueue = max_t(int, READ_ONCE(tp->rcv_nxt) -
READ_ONCE(tp->copied_seq), 0);
- r->idiag_wqueue = tp->write_seq - tp->snd_una;
+ r->idiag_wqueue = READ_ONCE(tp->write_seq) - tp->snd_una;
}
if (info)
tcp_get_info(sk, info);
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -169,9 +169,11 @@ int tcp_twsk_unique(struct sock *sk, str
* without appearing to create any others.
*/
if (likely(!tp->repair)) {
- tp->write_seq = tcptw->tw_snd_nxt + 65535 + 2;
- if (tp->write_seq == 0)
- tp->write_seq = 1;
+ u32 seq = tcptw->tw_snd_nxt + 65535 + 2;
+
+ if (!seq)
+ seq = 1;
+ WRITE_ONCE(tp->write_seq, seq);
tp->rx_opt.ts_recent = tcptw->tw_ts_recent;
tp->rx_opt.ts_recent_stamp = tcptw->tw_ts_recent_stamp;
}
@@ -258,7 +260,7 @@ int tcp_v4_connect(struct sock *sk, stru
tp->rx_opt.ts_recent = 0;
tp->rx_opt.ts_recent_stamp = 0;
if (likely(!tp->repair))
- tp->write_seq = 0;
+ WRITE_ONCE(tp->write_seq, 0);
}
inet->inet_dport = usin->sin_port;
@@ -296,10 +298,11 @@ int tcp_v4_connect(struct sock *sk, stru
if (likely(!tp->repair)) {
if (!tp->write_seq)
- tp->write_seq = secure_tcp_seq(inet->inet_saddr,
- inet->inet_daddr,
- inet->inet_sport,
- usin->sin_port);
+ WRITE_ONCE(tp->write_seq,
+ secure_tcp_seq(inet->inet_saddr,
+ inet->inet_daddr,
+ inet->inet_sport,
+ usin->sin_port));
tp->tsoffset = secure_tcp_ts_off(sock_net(sk),
inet->inet_saddr,
inet->inet_daddr);
@@ -2345,7 +2348,7 @@ static void get_tcp4_sock(struct sock *s
seq_printf(f, "%4d: %08X:%04X %08X:%04X %02X %08X:%08X %02X:%08lX "
"%08X %5u %8d %lu %d %pK %lu %lu %u %u %d",
i, src, srcp, dest, destp, state,
- tp->write_seq - tp->snd_una,
+ READ_ONCE(tp->write_seq) - tp->snd_una,
rx_queue,
timer_active,
jiffies_delta_to_clock_t(timer_expires - jiffies),
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -510,7 +510,7 @@ struct sock *tcp_create_openreq_child(co
newtp->app_limited = ~0U;
tcp_init_xmit_timers(newsk);
- newtp->write_seq = newtp->pushed_seq = treq->snt_isn + 1;
+ WRITE_ONCE(newtp->write_seq, newtp->pushed_seq = treq->snt_isn + 1);
newtp->rx_opt.saw_tstamp = 0;
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1175,7 +1175,7 @@ static void tcp_queue_skb(struct sock *s
struct tcp_sock *tp = tcp_sk(sk);
/* Advance write_seq and place onto the write_queue. */
- tp->write_seq = TCP_SKB_CB(skb)->end_seq;
+ WRITE_ONCE(tp->write_seq, TCP_SKB_CB(skb)->end_seq);
__skb_header_release(skb);
tcp_add_write_queue_tail(sk, skb);
sk->sk_wmem_queued += skb->truesize;
@@ -3397,7 +3397,7 @@ static void tcp_connect_queue_skb(struct
__skb_header_release(skb);
sk->sk_wmem_queued += skb->truesize;
sk_mem_charge(sk, skb->truesize);
- tp->write_seq = tcb->end_seq;
+ WRITE_ONCE(tp->write_seq, tcb->end_seq);
tp->packets_out += tcp_skb_pcount(skb);
}
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -206,7 +206,7 @@ static int tcp_v6_connect(struct sock *s
!ipv6_addr_equal(&sk->sk_v6_daddr, &usin->sin6_addr)) {
tp->rx_opt.ts_recent = 0;
tp->rx_opt.ts_recent_stamp = 0;
- tp->write_seq = 0;
+ WRITE_ONCE(tp->write_seq, 0);
}
sk->sk_v6_daddr = usin->sin6_addr;
@@ -304,10 +304,11 @@ static int tcp_v6_connect(struct sock *s
if (likely(!tp->repair)) {
if (!tp->write_seq)
- tp->write_seq = secure_tcpv6_seq(np->saddr.s6_addr32,
- sk->sk_v6_daddr.s6_addr32,
- inet->inet_sport,
- inet->inet_dport);
+ WRITE_ONCE(tp->write_seq,
+ secure_tcpv6_seq(np->saddr.s6_addr32,
+ sk->sk_v6_daddr.s6_addr32,
+ inet->inet_sport,
+ inet->inet_dport));
tp->tsoffset = secure_tcpv6_ts_off(sock_net(sk),
np->saddr.s6_addr32,
sk->sk_v6_daddr.s6_addr32);
@@ -1850,7 +1851,7 @@ static void get_tcp6_sock(struct seq_fil
dest->s6_addr32[0], dest->s6_addr32[1],
dest->s6_addr32[2], dest->s6_addr32[3], destp,
state,
- tp->write_seq - tp->snd_una,
+ READ_ONCE(tp->write_seq) - tp->snd_una,
rx_queue,
timer_active,
jiffies_delta_to_clock_t(timer_expires - jiffies),
From: Greg Kroah-Hartman <[email protected]>
From: Joe Lawrence <[email protected]>
commit 9c8e2f6d3d361439cc6744a094f1c15681b55269 upstream.
When building with -ffunction-sections, the compiler will place each
function into its own ELF section, prefixed with ".text". For example,
a simple test module with functions test_module_do_work() and
test_module_wq_func():
% objdump --section-headers test_module.o | awk '/\.text/{print $2}'
.text
.text.test_module_do_work
.text.test_module_wq_func
.init.text
.exit.text
Adjust the recordmcount scripts to look for ".text" as a section name
prefix. This will ensure that those functions will be included in the
__mcount_loc relocations:
% objdump --reloc --section __mcount_loc test_module.o
OFFSET TYPE VALUE
0000000000000000 R_X86_64_64 .text.test_module_do_work
0000000000000008 R_X86_64_64 .text.test_module_wq_func
0000000000000010 R_X86_64_64 .init.text
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Joe Lawrence <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Cc: Manoj Gupta <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
scripts/recordmcount.c | 2 +-
scripts/recordmcount.pl | 13 +++++++++++++
2 files changed, 14 insertions(+), 1 deletion(-)
--- a/scripts/recordmcount.c
+++ b/scripts/recordmcount.c
@@ -401,7 +401,7 @@ static uint32_t (*w2)(uint16_t);
static int
is_mcounted_section_name(char const *const txtname)
{
- return strcmp(".text", txtname) == 0 ||
+ return strncmp(".text", txtname, 5) == 0 ||
strcmp(".init.text", txtname) == 0 ||
strcmp(".ref.text", txtname) == 0 ||
strcmp(".sched.text", txtname) == 0 ||
--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -142,6 +142,11 @@ my %text_sections = (
".text.unlikely" => 1,
);
+# Acceptable section-prefixes to record.
+my %text_section_prefixes = (
+ ".text." => 1,
+);
+
# Note: we are nice to C-programmers here, thus we skip the '||='-idiom.
$objdump = 'objdump' if (!$objdump);
$objcopy = 'objcopy' if (!$objcopy);
@@ -523,6 +528,14 @@ while (<IN>) {
# Only record text sections that we know are safe
$read_function = defined($text_sections{$1});
+ if (!$read_function) {
+ foreach my $prefix (keys %text_section_prefixes) {
+ if (substr($1, 0, length $prefix) eq $prefix) {
+ $read_function = 1;
+ last;
+ }
+ }
+ }
# print out any recorded offsets
update_funcs();
From: Greg Kroah-Hartman <[email protected]>
From: Eric Dumazet <[email protected]>
[ Upstream commit 7db48e983930285b765743ebd665aecf9850582b ]
There are few places where we fetch tp->copied_seq while
this field can change from IRQ or other cpu.
We need to add READ_ONCE() annotations, and also make
sure write sides use corresponding WRITE_ONCE() to avoid
store-tearing.
Note that tcp_inq_hint() was already using READ_ONCE(tp->copied_seq)
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/tcp.c | 18 +++++++++---------
net/ipv4/tcp_diag.c | 3 ++-
net/ipv4/tcp_input.c | 6 +++---
net/ipv4/tcp_ipv4.c | 2 +-
net/ipv4/tcp_minisocks.c | 2 +-
net/ipv4/tcp_output.c | 2 +-
net/ipv6/tcp_ipv6.c | 2 +-
7 files changed, 18 insertions(+), 17 deletions(-)
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -567,7 +567,7 @@ __poll_t tcp_poll(struct file *file, str
(state != TCP_SYN_RECV || tp->fastopen_rsk)) {
int target = sock_rcvlowat(sk, 0, INT_MAX);
- if (tp->urg_seq == tp->copied_seq &&
+ if (tp->urg_seq == READ_ONCE(tp->copied_seq) &&
!sock_flag(sk, SOCK_URGINLINE) &&
tp->urg_data)
target++;
@@ -628,7 +628,7 @@ int tcp_ioctl(struct sock *sk, int cmd,
unlock_sock_fast(sk, slow);
break;
case SIOCATMARK:
- answ = tp->urg_data && tp->urg_seq == tp->copied_seq;
+ answ = tp->urg_data && tp->urg_seq == READ_ONCE(tp->copied_seq);
break;
case SIOCOUTQ:
if (sk->sk_state == TCP_LISTEN)
@@ -1696,9 +1696,9 @@ int tcp_read_sock(struct sock *sk, read_
sk_eat_skb(sk, skb);
if (!desc->count)
break;
- tp->copied_seq = seq;
+ WRITE_ONCE(tp->copied_seq, seq);
}
- tp->copied_seq = seq;
+ WRITE_ONCE(tp->copied_seq, seq);
tcp_rcv_space_adjust(sk);
@@ -1835,7 +1835,7 @@ static int tcp_zerocopy_receive(struct s
out:
up_read(¤t->mm->mmap_sem);
if (length) {
- tp->copied_seq = seq;
+ WRITE_ONCE(tp->copied_seq, seq);
tcp_rcv_space_adjust(sk);
/* Clean up data we have read: This will do ACK frames. */
@@ -2112,7 +2112,7 @@ int tcp_recvmsg(struct sock *sk, struct
if (urg_offset < used) {
if (!urg_offset) {
if (!sock_flag(sk, SOCK_URGINLINE)) {
- ++*seq;
+ WRITE_ONCE(*seq, *seq + 1);
urg_hole++;
offset++;
used--;
@@ -2134,7 +2134,7 @@ int tcp_recvmsg(struct sock *sk, struct
}
}
- *seq += used;
+ WRITE_ONCE(*seq, *seq + used);
copied += used;
len -= used;
@@ -2163,7 +2163,7 @@ skip_copy:
found_fin_ok:
/* Process the FIN. */
- ++*seq;
+ WRITE_ONCE(*seq, *seq + 1);
if (!(flags & MSG_PEEK))
sk_eat_skb(sk, skb);
break;
@@ -2578,7 +2578,7 @@ int tcp_disconnect(struct sock *sk, int
tcp_clear_xmit_timers(sk);
__skb_queue_purge(&sk->sk_receive_queue);
- tp->copied_seq = tp->rcv_nxt;
+ WRITE_ONCE(tp->copied_seq, tp->rcv_nxt);
tp->urg_data = 0;
tcp_write_queue_purge(sk);
tcp_fastopen_active_disable_ofo_check(sk);
--- a/net/ipv4/tcp_diag.c
+++ b/net/ipv4/tcp_diag.c
@@ -30,7 +30,8 @@ static void tcp_diag_get_info(struct soc
} else if (sk->sk_type == SOCK_STREAM) {
const struct tcp_sock *tp = tcp_sk(sk);
- r->idiag_rqueue = max_t(int, READ_ONCE(tp->rcv_nxt) - tp->copied_seq, 0);
+ r->idiag_rqueue = max_t(int, READ_ONCE(tp->rcv_nxt) -
+ READ_ONCE(tp->copied_seq), 0);
r->idiag_wqueue = tp->write_seq - tp->snd_una;
}
if (info)
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -5889,7 +5889,7 @@ static int tcp_rcv_synsent_state_process
/* Remember, tcp_poll() does not lock socket!
* Change state from SYN-SENT only after copied_seq
* is initialized. */
- tp->copied_seq = tp->rcv_nxt;
+ WRITE_ONCE(tp->copied_seq, tp->rcv_nxt);
smc_check_reset_syn(tp);
@@ -5964,7 +5964,7 @@ discard:
}
WRITE_ONCE(tp->rcv_nxt, TCP_SKB_CB(skb)->seq + 1);
- tp->copied_seq = tp->rcv_nxt;
+ WRITE_ONCE(tp->copied_seq, tp->rcv_nxt);
tp->rcv_wup = TCP_SKB_CB(skb)->seq + 1;
/* RFC1323: The window in SYN & SYN/ACK segments is
@@ -6126,7 +6126,7 @@ int tcp_rcv_state_process(struct sock *s
tcp_rearm_rto(sk);
} else {
tcp_init_transfer(sk, BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB);
- tp->copied_seq = tp->rcv_nxt;
+ WRITE_ONCE(tp->copied_seq, tp->rcv_nxt);
}
smp_mb();
tcp_set_state(sk, TCP_ESTABLISHED);
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -2340,7 +2340,7 @@ static void get_tcp4_sock(struct sock *s
* we might find a transient negative value.
*/
rx_queue = max_t(int, READ_ONCE(tp->rcv_nxt) -
- tp->copied_seq, 0);
+ READ_ONCE(tp->copied_seq), 0);
seq_printf(f, "%4d: %08X:%04X %08X:%04X %02X %08X:%08X %02X:%08lX "
"%08X %5u %8d %lu %d %pK %lu %lu %u %u %d",
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -470,7 +470,7 @@ struct sock *tcp_create_openreq_child(co
seq = treq->rcv_isn + 1;
newtp->rcv_wup = seq;
- newtp->copied_seq = seq;
+ WRITE_ONCE(newtp->copied_seq, seq);
WRITE_ONCE(newtp->rcv_nxt, seq);
newtp->segs_in = 1;
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -3381,7 +3381,7 @@ static void tcp_connect_init(struct sock
else
tp->rcv_tstamp = tcp_jiffies32;
tp->rcv_wup = tp->rcv_nxt;
- tp->copied_seq = tp->rcv_nxt;
+ WRITE_ONCE(tp->copied_seq, tp->rcv_nxt);
inet_csk(sk)->icsk_rto = tcp_timeout_init(sk);
inet_csk(sk)->icsk_retransmits = 0;
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -1839,7 +1839,7 @@ static void get_tcp6_sock(struct seq_fil
* we might find a transient negative value.
*/
rx_queue = max_t(int, READ_ONCE(tp->rcv_nxt) -
- tp->copied_seq, 0);
+ READ_ONCE(tp->copied_seq), 0);
seq_printf(seq,
"%4d: %08X%08X%08X%08X:%04X %08X%08X%08X%08X:%04X "
From: Greg Kroah-Hartman <[email protected]>
From: Balazs Nemeth <[email protected]>
commit d348ede32e99d3a04863e9f9b28d224456118c27 upstream.
A packet with skb_inner_network_header(skb) == skb_network_header(skb)
and ETH_P_MPLS_UC will prevent mpls_gso_segment from pulling any headers
from the packet. Subsequently, the call to skb_mac_gso_segment will
again call mpls_gso_segment with the same packet leading to an infinite
loop. In addition, ensure that the header length is a multiple of four,
which should hold irrespective of the number of stacked labels.
Signed-off-by: Balazs Nemeth <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mpls/mpls_gso.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/mpls/mpls_gso.c
+++ b/net/mpls/mpls_gso.c
@@ -18,6 +18,7 @@
#include <linux/netdev_features.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
+#include <net/mpls.h>
static struct sk_buff *mpls_gso_segment(struct sk_buff *skb,
netdev_features_t features)
@@ -31,6 +32,8 @@ static struct sk_buff *mpls_gso_segment(
skb_reset_network_header(skb);
mpls_hlen = skb_inner_network_header(skb) - skb_network_header(skb);
+ if (unlikely(!mpls_hlen || mpls_hlen % MPLS_HLEN))
+ goto out;
if (unlikely(!pskb_may_pull(skb, mpls_hlen)))
goto out;
From: Greg Kroah-Hartman <[email protected]>
From: Linus Torvalds <[email protected]>
commit 9b1ea29bc0d7b94d420f96a0f4121403efc3dd85 upstream.
This reverts commit 8ff60eb052eeba95cfb3efe16b08c9199f8121cf.
The kernel test robot reports a huge performance regression due to the
commit, and the reason seems fairly straightforward: when there is
contention on the page list (which is what causes acquire_slab() to
fail), we do _not_ want to just loop and try again, because that will
transfer the contention to the 'n->list_lock' spinlock we hold, and
just make things even worse.
This is admittedly likely a problem only on big machines - the kernel
test robot report comes from a 96-thread dual socket Intel Xeon Gold
6252 setup, but the regression there really is quite noticeable:
-47.9% regression of stress-ng.rawpkt.ops_per_sec
and the commit that was marked as being fixed (7ced37197196: "slub:
Acquire_slab() avoid loop") actually did the loop exit early very
intentionally (the hint being that "avoid loop" part of that commit
message), exactly to avoid this issue.
The correct thing to do may be to pick some kind of reasonable middle
ground: instead of breaking out of the loop on the very first sign of
contention, or trying over and over and over again, the right thing may
be to re-try _once_, and then give up on the second failure (or pick
your favorite value for "once"..).
Reported-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/lkml/20210301080404.GF12822@xsang-OptiPlex-9020/
Cc: Jann Horn <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Acked-by: Christoph Lameter <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/slub.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1830,7 +1830,7 @@ static void *get_partial_node(struct kme
t = acquire_slab(s, n, page, object == NULL, &objects);
if (!t)
- continue; /* cmpxchg raced */
+ break;
available += objects;
if (!object) {
From: Greg Kroah-Hartman <[email protected]>
From: Paul Cercueil <[email protected]>
commit cf9e60aa69ae6c40d3e3e4c94dd6c8de31674e9b upstream.
We must disable the regulator that was enabled in the probe function.
Fixes: 7994fe55a4a2 ("dm9000: Add regulator and reset support to dm9000")
Signed-off-by: Paul Cercueil <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/davicom/dm9000.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/davicom/dm9000.c
+++ b/drivers/net/ethernet/davicom/dm9000.c
@@ -143,6 +143,8 @@ struct board_info {
u32 wake_state;
int ip_summed;
+
+ struct regulator *power_supply;
};
/* debug code */
@@ -1492,6 +1494,8 @@ dm9000_probe(struct platform_device *pde
db->dev = &pdev->dev;
db->ndev = ndev;
+ if (!IS_ERR(power))
+ db->power_supply = power;
spin_lock_init(&db->lock);
mutex_init(&db->addr_lock);
@@ -1781,10 +1785,13 @@ static int
dm9000_drv_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
+ struct board_info *dm = to_dm9000_board(ndev);
unregister_netdev(ndev);
- dm9000_release_board(pdev, netdev_priv(ndev));
+ dm9000_release_board(pdev, dm);
free_netdev(ndev); /* free device structure */
+ if (dm->power_supply)
+ regulator_disable(dm->power_supply);
dev_dbg(&pdev->dev, "released and freed device\n");
return 0;
From: Greg Kroah-Hartman <[email protected]>
From: Paul Moore <[email protected]>
commit ad5d07f4a9cd671233ae20983848874731102c08 upstream.
The current CIPSO and CALIPSO refcounting scheme for the DOI
definitions is a bit flawed in that we:
1. Don't correctly match gets/puts in netlbl_cipsov4_list().
2. Decrement the refcount on each attempt to remove the DOI from the
DOI list, only removing it from the list once the refcount drops
to zero.
This patch fixes these problems by adding the missing "puts" to
netlbl_cipsov4_list() and introduces a more conventional, i.e.
not-buggy, refcounting mechanism to the DOI definitions. Upon the
addition of a DOI to the DOI list, it is initialized with a refcount
of one, removing a DOI from the list removes it from the list and
drops the refcount by one; "gets" and "puts" behave as expected with
respect to refcounts, increasing and decreasing the DOI's refcount by
one.
Fixes: b1edeb102397 ("netlabel: Replace protocol/NetLabel linking with refrerence counts")
Fixes: d7cce01504a0 ("netlabel: Add support for removing a CALIPSO DOI.")
Reported-by: [email protected]
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/cipso_ipv4.c | 11 +----------
net/ipv6/calipso.c | 14 +++++---------
net/netlabel/netlabel_cipso_v4.c | 3 +++
3 files changed, 9 insertions(+), 19 deletions(-)
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -533,16 +533,10 @@ int cipso_v4_doi_remove(u32 doi, struct
ret_val = -ENOENT;
goto doi_remove_return;
}
- if (!refcount_dec_and_test(&doi_def->refcount)) {
- spin_unlock(&cipso_v4_doi_list_lock);
- ret_val = -EBUSY;
- goto doi_remove_return;
- }
list_del_rcu(&doi_def->list);
spin_unlock(&cipso_v4_doi_list_lock);
- cipso_v4_cache_invalidate();
- call_rcu(&doi_def->rcu, cipso_v4_doi_free_rcu);
+ cipso_v4_doi_putdef(doi_def);
ret_val = 0;
doi_remove_return:
@@ -599,9 +593,6 @@ void cipso_v4_doi_putdef(struct cipso_v4
if (!refcount_dec_and_test(&doi_def->refcount))
return;
- spin_lock(&cipso_v4_doi_list_lock);
- list_del_rcu(&doi_def->list);
- spin_unlock(&cipso_v4_doi_list_lock);
cipso_v4_cache_invalidate();
call_rcu(&doi_def->rcu, cipso_v4_doi_free_rcu);
--- a/net/ipv6/calipso.c
+++ b/net/ipv6/calipso.c
@@ -97,6 +97,9 @@ struct calipso_map_cache_entry {
static struct calipso_map_cache_bkt *calipso_cache;
+static void calipso_cache_invalidate(void);
+static void calipso_doi_putdef(struct calipso_doi *doi_def);
+
/* Label Mapping Cache Functions
*/
@@ -458,15 +461,10 @@ static int calipso_doi_remove(u32 doi, s
ret_val = -ENOENT;
goto doi_remove_return;
}
- if (!refcount_dec_and_test(&doi_def->refcount)) {
- spin_unlock(&calipso_doi_list_lock);
- ret_val = -EBUSY;
- goto doi_remove_return;
- }
list_del_rcu(&doi_def->list);
spin_unlock(&calipso_doi_list_lock);
- call_rcu(&doi_def->rcu, calipso_doi_free_rcu);
+ calipso_doi_putdef(doi_def);
ret_val = 0;
doi_remove_return:
@@ -522,10 +520,8 @@ static void calipso_doi_putdef(struct ca
if (!refcount_dec_and_test(&doi_def->refcount))
return;
- spin_lock(&calipso_doi_list_lock);
- list_del_rcu(&doi_def->list);
- spin_unlock(&calipso_doi_list_lock);
+ calipso_cache_invalidate();
call_rcu(&doi_def->rcu, calipso_doi_free_rcu);
}
--- a/net/netlabel/netlabel_cipso_v4.c
+++ b/net/netlabel/netlabel_cipso_v4.c
@@ -581,6 +581,7 @@ list_start:
break;
}
+ cipso_v4_doi_putdef(doi_def);
rcu_read_unlock();
genlmsg_end(ans_skb, data);
@@ -589,12 +590,14 @@ list_start:
list_retry:
/* XXX - this limit is a guesstimate */
if (nlsze_mult < 4) {
+ cipso_v4_doi_putdef(doi_def);
rcu_read_unlock();
kfree_skb(ans_skb);
nlsze_mult *= 2;
goto list_start;
}
list_failure_lock:
+ cipso_v4_doi_putdef(doi_def);
rcu_read_unlock();
list_failure:
kfree_skb(ans_skb);
From: Greg Kroah-Hartman <[email protected]>
From: Xie He <[email protected]>
commit f7d9d4854519fdf4d45c70a4d953438cd88e7e58 upstream.
For the devices in this driver, the default qdisc is "noqueue",
because their "tx_queue_len" is 0.
In function "__dev_queue_xmit" in "net/core/dev.c", devices with the
"noqueue" qdisc are specially handled. Packets are transmitted without
being queued after a "dev->flags & IFF_UP" check. However, it's possible
that even if this check succeeds, "ops->ndo_stop" may still have already
been called. This is because in "__dev_close_many", "ops->ndo_stop" is
called before clearing the "IFF_UP" flag.
If we call "netif_stop_queue" in "ops->ndo_stop", then it's possible in
"__dev_queue_xmit", it sees the "IFF_UP" flag is present, and then it
checks "netif_xmit_stopped" and finds that the queue is already stopped.
In this case, it will complain that:
"Virtual device ... asks to queue packet!"
To prevent "__dev_queue_xmit" from generating this complaint, we should
not call "netif_stop_queue" in "ops->ndo_stop".
We also don't need to call "netif_start_queue" in "ops->ndo_open",
because after a netdev is allocated and registered, the
"__QUEUE_STATE_DRV_XOFF" flag is initially not set, so there is no need
to call "netif_start_queue" to clear it.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <[email protected]>
Acked-by: Martin Schiller <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wan/lapbether.c | 3 ---
1 file changed, 3 deletions(-)
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -286,7 +286,6 @@ static int lapbeth_open(struct net_devic
return -ENODEV;
}
- netif_start_queue(dev);
return 0;
}
@@ -294,8 +293,6 @@ static int lapbeth_close(struct net_devi
{
int err;
- netif_stop_queue(dev);
-
if ((err = lapb_unregister(dev)) != LAPB_OK)
pr_err("lapb_unregister error: %d\n", err);
From: Greg Kroah-Hartman <[email protected]>
From: Sergey Shtylyov <[email protected]>
commit 8c91bc3d44dfef8284af384877fbe61117e8b7d1 upstream.
According to the SH7710, SH7712, SH7713 Group User's Manual: Hardware,
Rev. 3.00, the TRSCER register actually has only bit 7 valid (and named
differently), with all the other bits reserved. Apparently, this was not
the case with some early revisions of the manual as we have the other
bits declared (and set) in the original driver. Follow the suit and add
the explicit sh_eth_cpu_data::trscer_err_mask initializer for SH771x...
Fixes: 86a74ff21a7a ("net: sh_eth: add support for Renesas SuperH Ethernet")
Signed-off-by: Sergey Shtylyov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/renesas/sh_eth.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1126,6 +1126,9 @@ static struct sh_eth_cpu_data sh771x_dat
EESIPR_CEEFIP | EESIPR_CELFIP |
EESIPR_RRFIP | EESIPR_RTLFIP | EESIPR_RTSFIP |
EESIPR_PREIP | EESIPR_CERFIP,
+
+ .trscer_err_mask = DESC_I_RINT8,
+
.tsu = 1,
.dual_port = 1,
};
From: Greg Kroah-Hartman <[email protected]>
From: Joakim Zhang <[email protected]>
commit a3e860a83397bf761ec1128a3f0ba186445992c6 upstream.
If clear GMAC_CONFIG_TE bit, it would stop all tx channels, but users
may only want to stop specific tx channel.
Fixes: 48863ce5940f ("stmmac: add DMA support for GMAC 4.xx")
Signed-off-by: Joakim Zhang <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c | 4 ----
1 file changed, 4 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
@@ -63,10 +63,6 @@ void dwmac4_dma_stop_tx(void __iomem *io
value &= ~DMA_CONTROL_ST;
writel(value, ioaddr + DMA_CHAN_TX_CONTROL(chan));
-
- value = readl(ioaddr + GMAC_CONFIG);
- value &= ~GMAC_CONFIG_TE;
- writel(value, ioaddr + GMAC_CONFIG);
}
void dwmac4_dma_start_rx(void __iomem *ioaddr, u32 chan)
From: Greg Kroah-Hartman <[email protected]>
From: Paulo Alcantara <[email protected]>
commit 14302ee3301b3a77b331cc14efb95bf7184c73cc upstream.
In cifs_statfs(), if server->ops->queryfs is not NULL, then we should
use its return value rather than always returning 0. Instead, use rc
variable as it is properly set to 0 in case there is no
server->ops->queryfs.
Signed-off-by: Paulo Alcantara (SUSE) <[email protected]>
Reviewed-by: Aurelien Aptel <[email protected]>
Reviewed-by: Ronnie Sahlberg <[email protected]>
CC: <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/cifsfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -229,7 +229,7 @@ cifs_statfs(struct dentry *dentry, struc
rc = server->ops->queryfs(xid, tcon, buf);
free_xid(xid);
- return 0;
+ return rc;
}
static long cifs_fallocate(struct file *file, int mode, loff_t off, loff_t len)
From: Greg Kroah-Hartman <[email protected]>
From: Ong Boon Leong <[email protected]>
commit 879c348c35bb5fb758dd881d8a97409c1862dae8 upstream.
We introduce dwmac410_dma_init_channel() here for both EQoS v4.10 and
above which use different DMA_CH(n)_Interrupt_Enable bit definitions for
NIE and AIE.
Fixes: 48863ce5940f ("stmmac: add DMA support for GMAC 4.xx")
Signed-off-by: Ong Boon Leong <[email protected]>
Signed-off-by: Ramesh Babu B <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
@@ -119,6 +119,23 @@ static void dwmac4_dma_init_channel(void
ioaddr + DMA_CHAN_INTR_ENA(chan));
}
+static void dwmac410_dma_init_channel(void __iomem *ioaddr,
+ struct stmmac_dma_cfg *dma_cfg, u32 chan)
+{
+ u32 value;
+
+ /* common channel control register config */
+ value = readl(ioaddr + DMA_CHAN_CONTROL(chan));
+ if (dma_cfg->pblx8)
+ value = value | DMA_BUS_MODE_PBL;
+
+ writel(value, ioaddr + DMA_CHAN_CONTROL(chan));
+
+ /* Mask interrupts by writing to CSR7 */
+ writel(DMA_CHAN_INTR_DEFAULT_MASK_4_10,
+ ioaddr + DMA_CHAN_INTR_ENA(chan));
+}
+
static void dwmac4_dma_init(void __iomem *ioaddr,
struct stmmac_dma_cfg *dma_cfg, int atds)
{
@@ -461,7 +478,7 @@ const struct stmmac_dma_ops dwmac4_dma_o
const struct stmmac_dma_ops dwmac410_dma_ops = {
.reset = dwmac4_dma_reset,
.init = dwmac4_dma_init,
- .init_chan = dwmac4_dma_init_channel,
+ .init_chan = dwmac410_dma_init_channel,
.init_rx_chan = dwmac4_dma_init_rx_chan,
.init_tx_chan = dwmac4_dma_init_tx_chan,
.axi = dwmac4_dma_axi,
From: Greg Kroah-Hartman <[email protected]>
From: Wang Qing <[email protected]>
commit 51c44babdc19aaf882e1213325a0ba291573308f upstream.
The copy_to_user() function returns the number of bytes remaining to be
copied, but we want to return -EFAULT if the copy doesn't complete.
Fixes: e01bcdd61320 ("vfio: ccw: realize VFIO_DEVICE_GET_REGION_INFO ioctl")
Signed-off-by: Wang Qing <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/cio/vfio_ccw_ops.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/s390/cio/vfio_ccw_ops.c
+++ b/drivers/s390/cio/vfio_ccw_ops.c
@@ -341,7 +341,7 @@ static ssize_t vfio_ccw_mdev_ioctl(struc
if (ret)
return ret;
- return copy_to_user((void __user *)arg, &info, minsz);
+ return copy_to_user((void __user *)arg, &info, minsz) ? -EFAULT : 0;
}
case VFIO_DEVICE_GET_REGION_INFO:
{
@@ -362,7 +362,7 @@ static ssize_t vfio_ccw_mdev_ioctl(struc
if (ret)
return ret;
- return copy_to_user((void __user *)arg, &info, minsz);
+ return copy_to_user((void __user *)arg, &info, minsz) ? -EFAULT : 0;
}
case VFIO_DEVICE_GET_IRQ_INFO:
{
From: Greg Kroah-Hartman <[email protected]>
From: Ian Rogers <[email protected]>
commit 137a5258939aca56558f3a23eb229b9c4b293917 upstream.
Issue detected by address sanitizer.
Fixes: cd4ceb63438e9e28 ("perf util: Save pid-cmdline mapping into tracing header")
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/trace-event-read.c | 1 +
1 file changed, 1 insertion(+)
--- a/tools/perf/util/trace-event-read.c
+++ b/tools/perf/util/trace-event-read.c
@@ -381,6 +381,7 @@ static int read_saved_cmdline(struct tep
pr_debug("error reading saved cmdlines\n");
goto out;
}
+ buf[ret] = '\0';
parse_saved_cmdline(pevent, buf, size);
ret = 0;
From: Greg Kroah-Hartman <[email protected]>
From: Eric Farman <[email protected]>
commit d9c48a948d29bcb22f4fe61a81b718ef6de561a0 upstream.
Fixes: 120e214e504f ("vfio: ccw: realize VFIO_DEVICE_G(S)ET_IRQ_INFO ioctls")
Signed-off-by: Eric Farman <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/cio/vfio_ccw_ops.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/s390/cio/vfio_ccw_ops.c
+++ b/drivers/s390/cio/vfio_ccw_ops.c
@@ -383,7 +383,7 @@ static ssize_t vfio_ccw_mdev_ioctl(struc
if (info.count == -1)
return -EINVAL;
- return copy_to_user((void __user *)arg, &info, minsz);
+ return copy_to_user((void __user *)arg, &info, minsz) ? -EFAULT : 0;
}
case VFIO_DEVICE_SET_IRQS:
{
From: Greg Kroah-Hartman <[email protected]>
From: Sergey Shtylyov <[email protected]>
commit 165bc5a4f30eee4735845aa7dbd6b738643f2603 upstream.
According to the RZ/A2M Group User's Manual: Hardware, Rev. 2.00,
the TRSCER register has bit 9 reserved, hence we can't use the driver's
default TRSCER mask. Add the explicit initializer for sh_eth_cpu_data::
trscer_err_mask for R7S9210.
Fixes: 6e0bb04d0e4f ("sh_eth: Add R7S9210 support")
Signed-off-by: Sergey Shtylyov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/renesas/sh_eth.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -825,6 +825,8 @@ static struct sh_eth_cpu_data r7s9210_da
.fdr_value = 0x0000070f,
+ .trscer_err_mask = DESC_I_RINT8 | DESC_I_RINT5,
+
.apr = 1,
.mpr = 1,
.tpauser = 1,
From: Greg Kroah-Hartman <[email protected]>
From: Paul Cercueil <[email protected]>
commit ac88c531a5b38877eba2365a3f28f0c8b513dc33 upstream.
When the probe fails or requests to be defered, we must disable the
regulator that was previously enabled.
Fixes: 7994fe55a4a2 ("dm9000: Add regulator and reset support to dm9000")
Signed-off-by: Paul Cercueil <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/davicom/dm9000.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/davicom/dm9000.c
+++ b/drivers/net/ethernet/davicom/dm9000.c
@@ -1460,7 +1460,7 @@ dm9000_probe(struct platform_device *pde
if (ret) {
dev_err(dev, "failed to request reset gpio %d: %d\n",
reset_gpios, ret);
- return -ENODEV;
+ goto out_regulator_disable;
}
/* According to manual PWRST# Low Period Min 1ms */
@@ -1472,8 +1472,10 @@ dm9000_probe(struct platform_device *pde
if (!pdata) {
pdata = dm9000_parse_dt(&pdev->dev);
- if (IS_ERR(pdata))
- return PTR_ERR(pdata);
+ if (IS_ERR(pdata)) {
+ ret = PTR_ERR(pdata);
+ goto out_regulator_disable;
+ }
}
/* Init network device */
@@ -1716,6 +1718,10 @@ out:
dm9000_release_board(pdev, db);
free_netdev(ndev);
+out_regulator_disable:
+ if (!IS_ERR(power))
+ regulator_disable(power);
+
return ret;
}
From: Greg Kroah-Hartman <[email protected]>
From: Daniel Vetter <[email protected]>
commit de066e116306baf3a6a62691ac63cfc0b1dabddb upstream.
Some of them have gaps, or fields we don't clear. Native ioctl code
does full copies plus zero-extends on size mismatch, so nothing can
leak. But compat is more hand-rolled so need to be careful.
None of these matter for performance, so just memset.
Also I didn't fix up the CONFIG_DRM_LEGACY or CONFIG_DRM_AGP ioctl, those
are security holes anyway.
Acked-by: Maxime Ripard <[email protected]>
Reported-by: [email protected] # vblank ioctl
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit e926c474ebee404441c838d18224cd6f246a71b7)
Signed-off-by: Maarten Lankhorst <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_ioc32.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/drivers/gpu/drm/drm_ioc32.c
+++ b/drivers/gpu/drm/drm_ioc32.c
@@ -96,6 +96,8 @@ static int compat_drm_version(struct fil
if (copy_from_user(&v32, (void __user *)arg, sizeof(v32)))
return -EFAULT;
+ memset(&v, 0, sizeof(v));
+
v = (struct drm_version) {
.name_len = v32.name_len,
.name = compat_ptr(v32.name),
@@ -134,6 +136,9 @@ static int compat_drm_getunique(struct f
if (copy_from_user(&uq32, (void __user *)arg, sizeof(uq32)))
return -EFAULT;
+
+ memset(&uq, 0, sizeof(uq));
+
uq = (struct drm_unique){
.unique_len = uq32.unique_len,
.unique = compat_ptr(uq32.unique),
@@ -260,6 +265,8 @@ static int compat_drm_getclient(struct f
if (copy_from_user(&c32, argp, sizeof(c32)))
return -EFAULT;
+ memset(&client, 0, sizeof(client));
+
client.idx = c32.idx;
err = drm_ioctl_kernel(file, drm_getclient, &client, DRM_UNLOCKED);
@@ -842,6 +849,8 @@ static int compat_drm_wait_vblank(struct
if (copy_from_user(&req32, argp, sizeof(req32)))
return -EFAULT;
+ memset(&req, 0, sizeof(req));
+
req.request.type = req32.request.type;
req.request.sequence = req32.request.sequence;
req.request.signal = req32.request.signal;
@@ -879,6 +888,8 @@ static int compat_drm_mode_addfb2(struct
struct drm_mode_fb_cmd2 req64;
int err;
+ memset(&req64, 0, sizeof(req64));
+
if (copy_from_user(&req64, argp,
offsetof(drm_mode_fb_cmd232_t, modifier)))
return -EFAULT;
From: Greg Kroah-Hartman <[email protected]>
From: Artem Lapkin <[email protected]>
commit fa0c16caf3d73ab4d2e5d6fa2ef2394dbec91791 upstream.
Problem: random stucks on reboot stage about 1/20 stuck/reboots
// debug kernel log
[ 4.496660] reboot: kernel restart prepare CMD:(null)
[ 4.498114] meson_ee_pwrc c883c000.system-controller:power-controller: shutdown begin
[ 4.503949] meson_ee_pwrc c883c000.system-controller:power-controller: shutdown domain 0:VPU...
...STUCK...
Solution: add shutdown function to meson_drm driver
// debug kernel log
[ 5.231896] reboot: kernel restart prepare CMD:(null)
[ 5.246135] [drm:meson_drv_shutdown]
...
[ 5.259271] meson_ee_pwrc c883c000.system-controller:power-controller: shutdown begin
[ 5.274688] meson_ee_pwrc c883c000.system-controller:power-controller: shutdown domain 0:VPU...
[ 5.338331] reboot: Restarting system
[ 5.358293] psci: PSCI_0_2_FN_SYSTEM_RESET reboot_mode:0 cmd:(null)
bl31 reboot reason: 0xd
bl31 reboot reason: 0x0
system cmd 1.
...REBOOT...
Tested: on VIM1 VIM2 VIM3 VIM3L khadas sbcs - 1000+ successful reboots
and Odroid boards, WeTek Play2 (GXBB)
Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Artem Lapkin <[email protected]>
Tested-by: Christian Hewitt <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Acked-by: Kevin Hilman <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Maarten Lankhorst <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/meson/meson_drv.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -384,6 +384,16 @@ static int meson_probe_remote(struct pla
return count;
}
+static void meson_drv_shutdown(struct platform_device *pdev)
+{
+ struct meson_drm *priv = dev_get_drvdata(&pdev->dev);
+ struct drm_device *drm = priv->drm;
+
+ DRM_DEBUG_DRIVER("\n");
+ drm_kms_helper_poll_fini(drm);
+ drm_atomic_helper_shutdown(drm);
+}
+
static int meson_drv_probe(struct platform_device *pdev)
{
struct component_match *match = NULL;
@@ -428,6 +438,7 @@ MODULE_DEVICE_TABLE(of, dt_match);
static struct platform_driver meson_drm_platform_driver = {
.probe = meson_drv_probe,
+ .shutdown = meson_drv_shutdown,
.driver = {
.name = "meson-drm",
.of_match_table = dt_match,
From: Greg Kroah-Hartman <[email protected]>
From: Jia-Ju Bai <[email protected]>
commit 179d0ba0c454057a65929c46af0d6ad986754781 upstream.
When sock_alloc_send_skb() returns NULL to skb, no error return code of
qrtr_sendmsg() is assigned.
To fix this bug, rc is assigned with -ENOMEM in this case.
Fixes: 194ccc88297a ("net: qrtr: Support decoding incoming v2 packets")
Reported-by: TOTE Robot <[email protected]>
Signed-off-by: Jia-Ju Bai <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/qrtr/qrtr.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/net/qrtr/qrtr.c
+++ b/net/qrtr/qrtr.c
@@ -797,8 +797,10 @@ static int qrtr_sendmsg(struct socket *s
plen = (len + 3) & ~3;
skb = sock_alloc_send_skb(sk, plen + QRTR_HDR_MAX_SIZE,
msg->msg_flags & MSG_DONTWAIT, &rc);
- if (!skb)
+ if (!skb) {
+ rc = -ENOMEM;
goto out_node;
+ }
skb_reserve(skb, QRTR_HDR_MAX_SIZE);
From: Greg Kroah-Hartman <[email protected]>
From: Maxim Mikityanskiy <[email protected]>
commit 8a7e27fd5cd696ba564a3f62cedef7269cfd0723 upstream.
usbtv doesn't support power management, so on system suspend the
.disconnect callback of the driver is called. The teardown sequence
includes a call to snd_card_free. Its implementation waits until the
refcount of the sound card device drops to zero, however, if its file is
open, snd_card_file_add takes a reference, which can't be dropped during
the suspend, because the userspace processes are already frozen at this
point. snd_card_free waits for completion forever, leading to a hang on
suspend.
This commit fixes this deadlock condition by replacing snd_card_free
with snd_card_free_when_closed, that doesn't wait until all references
are released, allowing suspend to progress.
Fixes: 63ddf68de52e ("[media] usbtv: add audio support")
Signed-off-by: Maxim Mikityanskiy <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/usbtv/usbtv-audio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/media/usb/usbtv/usbtv-audio.c
+++ b/drivers/media/usb/usbtv/usbtv-audio.c
@@ -399,7 +399,7 @@ void usbtv_audio_free(struct usbtv *usbt
cancel_work_sync(&usbtv->snd_trigger);
if (usbtv->snd && usbtv->udev) {
- snd_card_free(usbtv->snd);
+ snd_card_free_when_closed(usbtv->snd);
usbtv->snd = NULL;
}
}
From: Greg Kroah-Hartman <[email protected]>
From: Andreas Larsson <[email protected]>
[ Upstream commit bda166930c37604ffa93f2425426af6921ec575a ]
Commit cca079ef8ac29a7c02192d2bad2ffe4c0c5ffdd0 changed sparc32 to use
memblocks instead of bootmem, but also made high memory available via
memblock allocation which does not work together with e.g. phys_to_virt
and can lead to kernel panic.
This changes back to only low memory being allocatable in the early
stages, now using memblock allocation.
Signed-off-by: Andreas Larsson <[email protected]>
Acked-by: Mike Rapoport <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/sparc/mm/init_32.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/sparc/mm/init_32.c b/arch/sparc/mm/init_32.c
index 92634d4e440c..89a9244f2cf0 100644
--- a/arch/sparc/mm/init_32.c
+++ b/arch/sparc/mm/init_32.c
@@ -199,6 +199,9 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
size = memblock_phys_mem_size() - memblock_reserved_size();
*pages_avail = (size >> PAGE_SHIFT) - high_pages;
+ /* Only allow low memory to be allocated via memblock allocation */
+ memblock_set_current_limit(max_low_pfn << PAGE_SHIFT);
+
return max_pfn;
}
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Martin Kaiser <[email protected]>
[ Upstream commit a93c00e5f975f23592895b7e83f35de2d36b7633 ]
Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by converting to
irq_set_chained_handler_and_data().
See also 2cf5a03cb29d ("PCI/keystone: Fix race in installing chained IRQ
handler").
Based on the mail discussion, it seems ok to drop the error handling.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin Kaiser <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/pci-xgene-msi.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/controller/pci-xgene-msi.c b/drivers/pci/controller/pci-xgene-msi.c
index f4c02da84e59..0bfa5065b440 100644
--- a/drivers/pci/controller/pci-xgene-msi.c
+++ b/drivers/pci/controller/pci-xgene-msi.c
@@ -384,13 +384,9 @@ static int xgene_msi_hwirq_alloc(unsigned int cpu)
if (!msi_group->gic_irq)
continue;
- irq_set_chained_handler(msi_group->gic_irq,
- xgene_msi_isr);
- err = irq_set_handler_data(msi_group->gic_irq, msi_group);
- if (err) {
- pr_err("failed to register GIC IRQ handler\n");
- return -EINVAL;
- }
+ irq_set_chained_handler_and_data(msi_group->gic_irq,
+ xgene_msi_isr, msi_group);
+
/*
* Statically allocate MSI GIC IRQs to each CPU core.
* With 8-core X-Gene v1, 2 MSI GIC IRQs are allocated
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Khalid Aziz <[email protected]>
[ Upstream commit 147d8622f2a26ef34beacc60e1ed8b66c2fa457f ]
When userspace calls mprotect() to enable ADI on an address range,
do_mprotect_pkey() calls arch_validate_prot() to validate new
protection flags. arch_validate_prot() for sparc looks at the first
VMA associated with address range to verify if ADI can indeed be
enabled on this address range. This has two issues - (1) Address
range might cover multiple VMAs while arch_validate_prot() looks at
only the first VMA, (2) arch_validate_prot() peeks at VMA without
holding mmap lock which can result in race condition.
arch_validate_flags() from commit c462ac288f2c ("mm: Introduce
arch_validate_flags()") allows for VMA flags to be validated for all
VMAs that cover the address range given by user while holding mmap
lock. This patch updates sparc code to move the VMA check from
arch_validate_prot() to arch_validate_flags() to fix above two
issues.
Suggested-by: Jann Horn <[email protected]>
Suggested-by: Christoph Hellwig <[email protected]>
Suggested-by: Catalin Marinas <[email protected]>
Signed-off-by: Khalid Aziz <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/sparc/include/asm/mman.h | 54 +++++++++++++++++++----------------
1 file changed, 29 insertions(+), 25 deletions(-)
diff --git a/arch/sparc/include/asm/mman.h b/arch/sparc/include/asm/mman.h
index f94532f25db1..274217e7ed70 100644
--- a/arch/sparc/include/asm/mman.h
+++ b/arch/sparc/include/asm/mman.h
@@ -57,35 +57,39 @@ static inline int sparc_validate_prot(unsigned long prot, unsigned long addr)
{
if (prot & ~(PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM | PROT_ADI))
return 0;
- if (prot & PROT_ADI) {
- if (!adi_capable())
- return 0;
+ return 1;
+}
- if (addr) {
- struct vm_area_struct *vma;
+#define arch_validate_flags(vm_flags) arch_validate_flags(vm_flags)
+/* arch_validate_flags() - Ensure combination of flags is valid for a
+ * VMA.
+ */
+static inline bool arch_validate_flags(unsigned long vm_flags)
+{
+ /* If ADI is being enabled on this VMA, check for ADI
+ * capability on the platform and ensure VMA is suitable
+ * for ADI
+ */
+ if (vm_flags & VM_SPARC_ADI) {
+ if (!adi_capable())
+ return false;
- vma = find_vma(current->mm, addr);
- if (vma) {
- /* ADI can not be enabled on PFN
- * mapped pages
- */
- if (vma->vm_flags & (VM_PFNMAP | VM_MIXEDMAP))
- return 0;
+ /* ADI can not be enabled on PFN mapped pages */
+ if (vm_flags & (VM_PFNMAP | VM_MIXEDMAP))
+ return false;
- /* Mergeable pages can become unmergeable
- * if ADI is enabled on them even if they
- * have identical data on them. This can be
- * because ADI enabled pages with identical
- * data may still not have identical ADI
- * tags on them. Disallow ADI on mergeable
- * pages.
- */
- if (vma->vm_flags & VM_MERGEABLE)
- return 0;
- }
- }
+ /* Mergeable pages can become unmergeable
+ * if ADI is enabled on them even if they
+ * have identical data on them. This can be
+ * because ADI enabled pages with identical
+ * data may still not have identical ADI
+ * tags on them. Disallow ADI on mergeable
+ * pages.
+ */
+ if (vm_flags & VM_MERGEABLE)
+ return false;
}
- return 1;
+ return true;
}
#endif /* CONFIG_SPARC64 */
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Biju Das <[email protected]>
commit ac8d82f586c8692b501cb974604a71ef0e22a04c upstream.
RZ/G2L SoC has only BRS. This patch fixes null pointer access,when only
BRS is enabled.
Fixes: cbb7fa49c7466("media: v4l: vsp1: Rename BRU to BRx")
Signed-off-by: Biju Das <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/platform/vsp1/vsp1_drm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/media/platform/vsp1/vsp1_drm.c
+++ b/drivers/media/platform/vsp1/vsp1_drm.c
@@ -243,7 +243,7 @@ static int vsp1_du_pipeline_setup_brx(st
brx = &vsp1->bru->entity;
else if (pipe->brx && !drm_pipe->force_brx_release)
brx = pipe->brx;
- else if (!vsp1->bru->entity.pipe)
+ else if (vsp1_feature(vsp1, VSP1_HAS_BRU) && !vsp1->bru->entity.pipe)
brx = &vsp1->bru->entity;
else
brx = &vsp1->brs->entity;
From: Greg Kroah-Hartman <[email protected]>
From: Nicholas Piggin <[email protected]>
[ Upstream commit 11cb0a25f71818ca7ab4856548ecfd83c169aa4d ]
If an unrecoverable system reset hits in process context, the system
does not have to panic. Similar to machine check, call nmi_exit()
before die().
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/traps.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 1b2d84cb373b..2379c4bf3979 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -433,8 +433,11 @@ void system_reset_exception(struct pt_regs *regs)
die("Unrecoverable nested System Reset", regs, SIGABRT);
#endif
/* Must die if the interrupt is not recoverable */
- if (!(regs->msr & MSR_RI))
+ if (!(regs->msr & MSR_RI)) {
+ /* For the reason explained in die_mce, nmi_exit before die */
+ nmi_exit();
die("Unrecoverable System Reset", regs, SIGABRT);
+ }
if (!nested)
nmi_exit();
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Wolfram Sang <[email protected]>
[ Upstream commit 25c2e0fb5fefb8d7847214cf114d94c7aad8e9ce ]
'flags' and 'io' are needed first, so they should be at the beginning of
the private struct.
Signed-off-by: Wolfram Sang <[email protected]>
Reviewed-by: Niklas Söderlund <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-rcar.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index f9029800d399..3ea2ceec676c 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -117,6 +117,7 @@ enum rcar_i2c_type {
};
struct rcar_i2c_priv {
+ u32 flags;
void __iomem *io;
struct i2c_adapter adap;
struct i2c_msg *msg;
@@ -127,7 +128,6 @@ struct rcar_i2c_priv {
int pos;
u32 icccr;
- u32 flags;
u8 recovery_icmcr; /* protected by adapter lock */
enum rcar_i2c_type devtype;
struct i2c_client *slave;
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Krzysztof Wilczyński <[email protected]>
[ Upstream commit 42814c438aac79746d310f413a27d5b0b959c5de ]
The for_each_available_child_of_node helper internally makes use of the
of_get_next_available_child() which performs an of_node_get() on each
iteration when searching for next available child node.
Should an available child node be found, then it would return a device
node pointer with reference count incremented, thus early return from
the middle of the loop requires an explicit of_node_put() to prevent
reference count leak.
To stop the reference leak, explicitly call of_node_put() before
returning after an error occurred.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Wilczyński <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/pcie-mediatek.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
index ca06d8bc01e7..066e9e00de11 100644
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -1089,14 +1089,14 @@ static int mtk_pcie_setup(struct mtk_pcie *pcie)
err = of_pci_get_devfn(child);
if (err < 0) {
dev_err(dev, "failed to parse devfn: %d\n", err);
- return err;
+ goto error_put_node;
}
slot = PCI_SLOT(err);
err = mtk_pcie_parse_port(pcie, child, slot);
if (err)
- return err;
+ goto error_put_node;
}
err = mtk_pcie_subsys_powerup(pcie);
@@ -1112,6 +1112,9 @@ static int mtk_pcie_setup(struct mtk_pcie *pcie)
mtk_pcie_subsys_powerdown(pcie);
return 0;
+error_put_node:
+ of_node_put(child);
+ return err;
}
static int mtk_pcie_request_resources(struct mtk_pcie *pcie)
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Biju Das <[email protected]>
commit 6732f313938027a910e1f7351951ff52c0329e70 upstream.
RZ/G2L SoC has no UIF. This patch fixes null pointer access, when UIF
module is not used.
Fixes: 5e824f989e6e8("media: v4l: vsp1: Integrate DISCOM in display pipeline")
Signed-off-by: Biju Das <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/platform/vsp1/vsp1_drm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/media/platform/vsp1/vsp1_drm.c
+++ b/drivers/media/platform/vsp1/vsp1_drm.c
@@ -460,9 +460,9 @@ static int vsp1_du_pipeline_setup_inputs
* make sure it is present in the pipeline's list of entities if it
* wasn't already.
*/
- if (!use_uif) {
+ if (drm_pipe->uif && !use_uif) {
drm_pipe->uif->pipe = NULL;
- } else if (!drm_pipe->uif->pipe) {
+ } else if (drm_pipe->uif && !drm_pipe->uif->pipe) {
drm_pipe->uif->pipe = pipe;
list_add_tail(&drm_pipe->uif->list_pipe, &pipe->entities);
}
From: Greg Kroah-Hartman <[email protected]>
From: Chaotian Jing <[email protected]>
[ Upstream commit 0354ca6edd464a2cf332f390581977b8699ed081 ]
when get request SW timeout, if CMD/DAT xfer done irq coming right now,
then there is race between the msdc_request_timeout work and irq handler,
and the host->cmd and host->data may set to NULL in irq handler. also,
current flow ensure that only one path can go to msdc_request_done(), so
no need check the return value of cancel_delayed_work().
Signed-off-by: Chaotian Jing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/mtk-sd.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 9ecf86ba4bb0..967e47770af6 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -928,13 +928,13 @@ static void msdc_track_cmd_data(struct msdc_host *host,
static void msdc_request_done(struct msdc_host *host, struct mmc_request *mrq)
{
unsigned long flags;
- bool ret;
- ret = cancel_delayed_work(&host->req_timeout);
- if (!ret) {
- /* delay work already running */
- return;
- }
+ /*
+ * No need check the return value of cancel_delayed_work, as only ONE
+ * path will go here!
+ */
+ cancel_delayed_work(&host->req_timeout);
+
spin_lock_irqsave(&host->lock, flags);
host->mrq = NULL;
spin_unlock_irqrestore(&host->lock, flags);
@@ -952,7 +952,7 @@ static bool msdc_cmd_done(struct msdc_host *host, int events,
bool done = false;
bool sbc_error;
unsigned long flags;
- u32 *rsp = cmd->resp;
+ u32 *rsp;
if (mrq->sbc && cmd == mrq->cmd &&
(events & (MSDC_INT_ACMDRDY | MSDC_INT_ACMDCRCERR
@@ -973,6 +973,7 @@ static bool msdc_cmd_done(struct msdc_host *host, int events,
if (done)
return true;
+ rsp = cmd->resp;
sdr_clr_bits(host->base + MSDC_INTEN, cmd_ints_mask);
@@ -1154,7 +1155,7 @@ static void msdc_data_xfer_next(struct msdc_host *host,
static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
struct mmc_request *mrq, struct mmc_data *data)
{
- struct mmc_command *stop = data->stop;
+ struct mmc_command *stop;
unsigned long flags;
bool done;
unsigned int check_data = events &
@@ -1170,6 +1171,7 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
if (done)
return true;
+ stop = data->stop;
if (check_data || (stop && stop->error)) {
dev_dbg(host->dev, "DMA status: 0x%8X\n",
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Aleksandr Miloserdov <[email protected]>
[ Upstream commit 14d24e2cc77411301e906a8cf41884739de192de ]
TCM buffer length doesn't necessarily equal 8 + ADDITIONAL LENGTH which
might be considered an underflow in case of Data-In size being greater than
8 + ADDITIONAL LENGTH. So truncate buffer length to prevent underflow.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Roman Bolshakov <[email protected]>
Reviewed-by: Bodo Stroesser <[email protected]>
Signed-off-by: Aleksandr Miloserdov <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/target/target_core_pr.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c
index 10db5656fd5d..949879f2f1d1 100644
--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -3742,6 +3742,7 @@ core_scsi3_pri_read_keys(struct se_cmd *cmd)
spin_unlock(&dev->t10_pr.registration_lock);
put_unaligned_be32(add_len, &buf[4]);
+ target_set_cmd_data_length(cmd, 8 + add_len);
transport_kunmap_data_sg(cmd);
@@ -3760,7 +3761,7 @@ core_scsi3_pri_read_reservation(struct se_cmd *cmd)
struct t10_pr_registration *pr_reg;
unsigned char *buf;
u64 pr_res_key;
- u32 add_len = 16; /* Hardcoded to 16 when a reservation is held. */
+ u32 add_len = 0;
if (cmd->data_length < 8) {
pr_err("PRIN SA READ_RESERVATIONS SCSI Data Length: %u"
@@ -3778,8 +3779,9 @@ core_scsi3_pri_read_reservation(struct se_cmd *cmd)
pr_reg = dev->dev_pr_res_holder;
if (pr_reg) {
/*
- * Set the hardcoded Additional Length
+ * Set the Additional Length to 16 when a reservation is held
*/
+ add_len = 16;
put_unaligned_be32(add_len, &buf[4]);
if (cmd->data_length < 22)
@@ -3815,6 +3817,8 @@ core_scsi3_pri_read_reservation(struct se_cmd *cmd)
(pr_reg->pr_res_type & 0x0f);
}
+ target_set_cmd_data_length(cmd, 8 + add_len);
+
err:
spin_unlock(&dev->dev_reservation_lock);
transport_kunmap_data_sg(cmd);
@@ -3833,7 +3837,7 @@ core_scsi3_pri_report_capabilities(struct se_cmd *cmd)
struct se_device *dev = cmd->se_dev;
struct t10_reservation *pr_tmpl = &dev->t10_pr;
unsigned char *buf;
- u16 add_len = 8; /* Hardcoded to 8. */
+ u16 len = 8; /* Hardcoded to 8. */
if (cmd->data_length < 6) {
pr_err("PRIN SA REPORT_CAPABILITIES SCSI Data Length:"
@@ -3845,7 +3849,7 @@ core_scsi3_pri_report_capabilities(struct se_cmd *cmd)
if (!buf)
return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
- put_unaligned_be16(add_len, &buf[0]);
+ put_unaligned_be16(len, &buf[0]);
buf[2] |= 0x10; /* CRH: Compatible Reservation Hanlding bit. */
buf[2] |= 0x08; /* SIP_C: Specify Initiator Ports Capable bit */
buf[2] |= 0x04; /* ATP_C: All Target Ports Capable bit */
@@ -3874,6 +3878,8 @@ core_scsi3_pri_report_capabilities(struct se_cmd *cmd)
buf[4] |= 0x02; /* PR_TYPE_WRITE_EXCLUSIVE */
buf[5] |= 0x01; /* PR_TYPE_EXCLUSIVE_ACCESS_ALLREG */
+ target_set_cmd_data_length(cmd, len);
+
transport_kunmap_data_sg(cmd);
return 0;
@@ -4034,6 +4040,7 @@ core_scsi3_pri_read_full_status(struct se_cmd *cmd)
* Set ADDITIONAL_LENGTH
*/
put_unaligned_be32(add_len, &buf[4]);
+ target_set_cmd_data_length(cmd, 8 + add_len);
transport_kunmap_data_sg(cmd);
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Oliver O'Halloran <[email protected]>
[ Upstream commit 5537fcb319d016ce387f818dd774179bc03217f5 ]
On many powerpc platforms the discovery and initalisation of
pci_controllers (PHBs) happens inside of setup_arch(). This is very early
in boot (pre-initcalls) and means that we're initialising the PHB long
before many basic kernel services (slab allocator, debugfs, a real ioremap)
are available.
On PowerNV this causes an additional problem since we map the PHB registers
with ioremap(). As of commit d538aadc2718 ("powerpc/ioremap: warn on early
use of ioremap()") a warning is printed because we're using the "incorrect"
API to setup and MMIO mapping in searly boot. The kernel does provide
early_ioremap(), but that is not intended to create long-lived MMIO
mappings and a seperate warning is printed by generic code if
early_ioremap() mappings are "leaked."
This is all fixable with dumb hacks like using early_ioremap() to setup
the initial mapping then replacing it with a real ioremap later on in
boot, but it does raise the question: Why the hell are we setting up the
PHB's this early in boot?
The old and wise claim it's due to "hysterical rasins." Aside from amused
grapes there doesn't appear to be any real reason to maintain the current
behaviour. Already most of the newer embedded platforms perform PHB
discovery in an arch_initcall and between the end of setup_arch() and the
start of initcalls none of the generic kernel code does anything PCI
related. On powerpc scanning PHBs occurs in a subsys_initcall so it should
be possible to move the PHB discovery to a core, postcore or arch initcall.
This patch adds the ppc_md.discover_phbs hook and a core_initcall stub that
calls it. The core_initcalls are the earliest to be called so this will
any possibly issues with dependency between initcalls. This isn't just an
academic issue either since on pseries and PowerNV EEH init occurs in an
arch_initcall and depends on the pci_controllers being available, similarly
the creation of pci_dns occurs at core_initcall_sync (i.e. between core and
postcore initcalls). These problems need to be addressed seperately.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Oliver O'Halloran <[email protected]>
[mpe: Make discover_phbs() static]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/machdep.h | 3 +++
arch/powerpc/kernel/pci-common.c | 10 ++++++++++
2 files changed, 13 insertions(+)
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index a47de82fb8e2..bda87cbf106d 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -71,6 +71,9 @@ struct machdep_calls {
int (*pcibios_root_bridge_prepare)(struct pci_host_bridge
*bridge);
+ /* finds all the pci_controllers present at boot */
+ void (*discover_phbs)(void);
+
/* To setup PHBs when using automatic OF platform driver for PCI */
int (*pci_setup_phb)(struct pci_controller *host);
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 88e4f69a09e5..74628aca2bf1 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1671,3 +1671,13 @@ static void fixup_hide_host_resource_fsl(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_resource_fsl);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl);
+
+
+static int __init discover_phbs(void)
+{
+ if (ppc_md.discover_phbs)
+ ppc_md.discover_phbs();
+
+ return 0;
+}
+core_initcall(discover_phbs);
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Takashi Iwai <[email protected]>
commit eea46a0879bcca23e15071f9968c0f6e6596e470 upstream.
The per_pin->work might be still floating at the suspend, and this may
hit the access to the hardware at an unexpected timing. Cancel the
work properly at the suspend callback for avoiding the buggy access.
Note that the bug doesn't trigger easily in the recent kernels since
the work is queued only when the repoll count is set, and usually it's
only at the resume callback, but it's still possible to hit in
theory.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1182377
Reported-and-tested-by: Abhishek Sahu <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_hdmi.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -2326,6 +2326,18 @@ static void generic_hdmi_free(struct hda
}
#ifdef CONFIG_PM
+static int generic_hdmi_suspend(struct hda_codec *codec)
+{
+ struct hdmi_spec *spec = codec->spec;
+ int pin_idx;
+
+ for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
+ struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
+ cancel_delayed_work_sync(&per_pin->work);
+ }
+ return 0;
+}
+
static int generic_hdmi_resume(struct hda_codec *codec)
{
struct hdmi_spec *spec = codec->spec;
@@ -2349,6 +2361,7 @@ static const struct hda_codec_ops generi
.build_controls = generic_hdmi_build_controls,
.unsol_event = hdmi_unsol_event,
#ifdef CONFIG_PM
+ .suspend = generic_hdmi_suspend,
.resume = generic_hdmi_resume,
#endif
};
From: Greg Kroah-Hartman <[email protected]>
From: Keita Suzuki <[email protected]>
[ Upstream commit 58cab46c622d6324e47bd1c533693c94498e4172 ]
Struct i40e_veb is allocated in function i40e_setup_pf_switch, and
stored to an array field veb inside struct i40e_pf. However when
i40e_setup_misc_vector fails, this memory leaks.
Fix this by calling exit and teardown functions.
Signed-off-by: Keita Suzuki <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index fe9da568ee19..1591f81d8ae3 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -13956,6 +13956,8 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (err) {
dev_info(&pdev->dev,
"setup of misc vector failed: %d\n", err);
+ i40e_cloud_filter_exit(pf);
+ i40e_fdir_teardown(pf);
goto err_vsis;
}
}
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: John Ernberg <[email protected]>
commit fc7c5c208eb7bc2df3a9f4234f14eca250001cb6 upstream.
The microphone in the Plantronics C320-M headset will randomly
fail to initialize properly, at least when using Microsoft Teams.
Introducing a 20ms delay on the control messages appears to
resolve the issue.
Link: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/1065
Tested-by: Andreas Kempe <[email protected]>
Signed-off-by: John Ernberg <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/quirks.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1338,6 +1338,14 @@ void snd_usb_ctl_msg_quirk(struct usb_de
&& (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
msleep(20);
+ /*
+ * Plantronics C320-M needs a delay to avoid random
+ * microhpone failures.
+ */
+ if (chip->usb_id == USB_ID(0x047f, 0xc025) &&
+ (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
+ msleep(20);
+
/* Zoom R16/24, many Logitech(at least H650e/H570e/BCC950),
* Jabra 550a, Kingston HyperX needs a tiny delay here,
* otherwise requests like get/set frequency return
From: Greg Kroah-Hartman <[email protected]>
From: Takashi Iwai <[email protected]>
commit 28e96c1693ec1cdc963807611f8b5ad400431e82 upstream.
The commit c02f77d32d2c ("ALSA: hda - Workaround for crackled sound on
AMD controller (1022:1457)") introduced a few workarounds for the
recent AMD HD-audio controller, and one of them is the forced BATCH
PCM mode so that PulseAudio avoids the timer-based scheduling. This
was thought to cover for some badly working applications, but this
actually worsens for more others. In total, this wasn't a good idea
to enforce it.
This is a partial revert of the commit above for dropping the PCM
BATCH enforcement part to recover from the regression again.
Fixes: c02f77d32d2c ("ALSA: hda - Workaround for crackled sound on AMD controller (1022:1457)")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195303
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/hda_controller.c | 7 -------
1 file changed, 7 deletions(-)
--- a/sound/pci/hda/hda_controller.c
+++ b/sound/pci/hda/hda_controller.c
@@ -624,13 +624,6 @@ static int azx_pcm_open(struct snd_pcm_s
20,
178000000);
- /* by some reason, the playback stream stalls on PulseAudio with
- * tsched=1 when a capture stream triggers. Until we figure out the
- * real cause, disable tsched mode by telling the PCM info flag.
- */
- if (chip->driver_caps & AZX_DCAPS_AMD_WORKAROUND)
- runtime->hw.info |= SNDRV_PCM_INFO_BATCH;
-
if (chip->align_buffer_size)
/* constrain buffer sizes to be multiple of 128
bytes. This is more efficient in terms of memory
From: Greg Kroah-Hartman <[email protected]>
From: Athira Rajeev <[email protected]>
[ Upstream commit d137845c973147a22622cc76c7b0bc16f6206323 ]
While sampling for marked events, currently we record the sample only
if the SIAR valid bit of Sampled Instruction Event Register (SIER) is
set. SIAR_VALID bit is used for fetching the instruction address from
Sampled Instruction Address Register(SIAR). But there are some
usecases, where the user is interested only in the PMU stats at each
counter overflow and the exact IP of the overflow event is not
required. Dropping SIAR invalid samples will fail to record some of
the counter overflows in such cases.
Example of such usecase is dumping the PMU stats (event counts) after
some regular amount of instructions/events from the userspace (ex: via
ptrace). Here counter overflow is indicated to userspace via signal
handler, and captured by monitoring and enabling I/O signaling on the
event file descriptor. In these cases, we expect to get
sample/overflow indication after each specified sample_period.
Perf event attribute will not have PERF_SAMPLE_IP set in the
sample_type if exact IP of the overflow event is not requested. So
while profiling if SAMPLE_IP is not set, just record the counter
overflow irrespective of SIAR_VALID check.
Suggested-by: Michael Ellerman <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
[mpe: Reflow comment and if formatting]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/perf/core-book3s.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 70de13822828..091bdeaf02a3 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -2046,7 +2046,17 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
left += period;
if (left <= 0)
left = period;
- record = siar_valid(regs);
+
+ /*
+ * If address is not requested in the sample via
+ * PERF_SAMPLE_IP, just record that sample irrespective
+ * of SIAR valid check.
+ */
+ if (event->attr.sample_type & PERF_SAMPLE_IP)
+ record = siar_valid(regs);
+ else
+ record = 1;
+
event->hw.last_period = event->hw.sample_period;
}
if (left < 0x80000000LL)
@@ -2064,9 +2074,10 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
* MMCR2. Check attr.exclude_kernel and address to drop the sample in
* these cases.
*/
- if (event->attr.exclude_kernel && record)
- if (is_kernel_addr(mfspr(SPRN_SIAR)))
- record = 0;
+ if (event->attr.exclude_kernel &&
+ (event->attr.sample_type & PERF_SAMPLE_IP) &&
+ is_kernel_addr(mfspr(SPRN_SIAR)))
+ record = 0;
/*
* Finally record data if requested.
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Christophe JAILLET <[email protected]>
[ Upstream commit 0bb7e560f821c7770973a94e346654c4bdccd42c ]
If 'mmc_of_parse()' fails, we must undo the previous 'dma_request_chan()'
call.
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/mxs-mmc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index add1e70195ea..7125687faf76 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -659,7 +659,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
ret = mmc_of_parse(mmc);
if (ret)
- goto out_clk_disable;
+ goto out_free_dma;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Adrian Hunter <[email protected]>
commit 66fbacccbab91e6e55d9c8f1fc0910a8eb6c81f7 upstream.
Avoid the following warning by always defining partition switch time:
[ 3.209874] mmc1: unspecified timeout for CMD6 - use generic
[ 3.222780] ------------[ cut here ]------------
[ 3.233363] WARNING: CPU: 1 PID: 111 at drivers/mmc/core/mmc_ops.c:575 __mmc_switch+0x200/0x204
Reported-by: Paul Fertser <[email protected]>
Fixes: 1c447116d017 ("mmc: mmc: Fix partition switch timeout for some eMMCs")
Signed-off-by: Adrian Hunter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/core/mmc.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -426,10 +426,6 @@ static int mmc_decode_ext_csd(struct mmc
/* EXT_CSD value is in units of 10ms, but we store in ms */
card->ext_csd.part_time = 10 * ext_csd[EXT_CSD_PART_SWITCH_TIME];
- /* Some eMMC set the value too low so set a minimum */
- if (card->ext_csd.part_time &&
- card->ext_csd.part_time < MMC_MIN_PART_SWITCH_TIME)
- card->ext_csd.part_time = MMC_MIN_PART_SWITCH_TIME;
/* Sleep / awake timeout in 100ns units */
if (sa_shift > 0 && sa_shift <= 0x17)
@@ -619,6 +615,17 @@ static int mmc_decode_ext_csd(struct mmc
card->ext_csd.data_sector_size = 512;
}
+ /*
+ * GENERIC_CMD6_TIME is to be used "unless a specific timeout is defined
+ * when accessing a specific field", so use it here if there is no
+ * PARTITION_SWITCH_TIME.
+ */
+ if (!card->ext_csd.part_time)
+ card->ext_csd.part_time = card->ext_csd.generic_cmd6_time;
+ /* Some eMMC set the value too low so set a minimum */
+ if (card->ext_csd.part_time < MMC_MIN_PART_SWITCH_TIME)
+ card->ext_csd.part_time = MMC_MIN_PART_SWITCH_TIME;
+
/* eMMC v5 or later */
if (card->ext_csd.rev >= 7) {
memcpy(card->ext_csd.fwrev, &ext_csd[EXT_CSD_FIRMWARE_VERSION],
From: Greg Kroah-Hartman <[email protected]>
From: Mike Christie <[email protected]>
[ Upstream commit d28d48c699779973ab9a3bd0e5acfa112bd4fdef ]
If iscsi_prep_scsi_cmd_pdu() fails we try to add it back to the cmdqueue,
but we leave it partially setup. We don't have functions that can undo the
pdu and init task setup. We only have cleanup_task which can clean up both
parts. So this has us just fail the cmd and go through the standard cleanup
routine and then have the SCSI midlayer retry it like is done when it fails
in the queuecommand path.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Lee Duncan <[email protected]>
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/libiscsi.c | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 2e40fd78e7b3..81471c304991 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1569,14 +1569,9 @@ static int iscsi_data_xmit(struct iscsi_conn *conn)
}
rc = iscsi_prep_scsi_cmd_pdu(conn->task);
if (rc) {
- if (rc == -ENOMEM || rc == -EACCES) {
- spin_lock_bh(&conn->taskqueuelock);
- list_add_tail(&conn->task->running,
- &conn->cmdqueue);
- conn->task = NULL;
- spin_unlock_bh(&conn->taskqueuelock);
- goto done;
- } else
+ if (rc == -ENOMEM || rc == -EACCES)
+ fail_scsi_task(conn->task, DID_IMM_RETRY);
+ else
fail_scsi_task(conn->task, DID_ABORT);
spin_lock_bh(&conn->taskqueuelock);
continue;
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Frank Li <[email protected]>
commit f06391c45e83f9a731045deb23df7cc3814fd795 upstream.
[ 6684.493350] Unable to handle kernel paging request at virtual address ffff800011c5b0f0
[ 6684.498531] mmc0: card 0001 removed
[ 6684.501556] Mem abort info:
[ 6684.509681] ESR = 0x96000047
[ 6684.512786] EC = 0x25: DABT (current EL), IL = 32 bits
[ 6684.518394] SET = 0, FnV = 0
[ 6684.521707] EA = 0, S1PTW = 0
[ 6684.524998] Data abort info:
[ 6684.528236] ISV = 0, ISS = 0x00000047
[ 6684.532986] CM = 0, WnR = 1
[ 6684.536129] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000081b22000
[ 6684.543923] [ffff800011c5b0f0] pgd=00000000bffff003, p4d=00000000bffff003, pud=00000000bfffe003, pmd=00000000900e1003, pte=0000000000000000
[ 6684.557915] Internal error: Oops: 96000047 [#1] PREEMPT SMP
[ 6684.564240] Modules linked in: sdhci_esdhc_imx(-) sdhci_pltfm sdhci cqhci mmc_block mmc_core fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine rng_core authenc libdes crct10dif_ce flexcan can_dev caam error [last unloaded: mmc_core]
[ 6684.587281] CPU: 0 PID: 79138 Comm: kworker/0:3H Not tainted 5.10.9-01410-g3ba33182767b-dirty #10
[ 6684.596160] Hardware name: Freescale i.MX8DXL EVK (DT)
[ 6684.601320] Workqueue: kblockd blk_mq_run_work_fn
[ 6684.606094] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
[ 6684.612286] pc : cqhci_request+0x148/0x4e8 [cqhci]
^GMessage from syslogd@ at Thu Jan 1 01:51:24 1970 ...[ 6684.617085] lr : cqhci_request+0x314/0x4e8 [cqhci]
[ 6684.626734] sp : ffff80001243b9f0
[ 6684.630049] x29: ffff80001243b9f0 x28: ffff00002c3dd000
[ 6684.635367] x27: 0000000000000001 x26: 0000000000000001
[ 6684.640690] x25: ffff00002c451000 x24: 000000000000000f
[ 6684.646007] x23: ffff000017e71c80 x22: ffff00002c451000
[ 6684.651326] x21: ffff00002c0f3550 x20: ffff00002c0f3550
[ 6684.656651] x19: ffff000017d46880 x18: ffff00002cea1500
[ 6684.661977] x17: 0000000000000000 x16: 0000000000000000
[ 6684.667294] x15: 000001ee628e3ed1 x14: 0000000000000278
[ 6684.672610] x13: 0000000000000001 x12: 0000000000000001
[ 6684.677927] x11: 0000000000000000 x10: 0000000000000000
[ 6684.683243] x9 : 000000000000002b x8 : 0000000000001000
[ 6684.688560] x7 : 0000000000000010 x6 : ffff00002c0f3678
[ 6684.693886] x5 : 000000000000000f x4 : ffff800011c5b000
[ 6684.699211] x3 : 000000000002d988 x2 : 0000000000000008
[ 6684.704537] x1 : 00000000000000f0 x0 : 0002d9880008102f
[ 6684.709854] Call trace:
[ 6684.712313] cqhci_request+0x148/0x4e8 [cqhci]
[ 6684.716803] mmc_cqe_start_req+0x58/0x68 [mmc_core]
[ 6684.721698] mmc_blk_mq_issue_rq+0x460/0x810 [mmc_block]
[ 6684.727018] mmc_mq_queue_rq+0x118/0x2b0 [mmc_block]
The problem occurs when cqhci_request() get called after cqhci_disable() as
it leads to access of allocated memory that has already been freed. Let's
fix the problem by calling cqhci_disable() a bit later in the remove path.
Signed-off-by: Frank Li <[email protected]>
Diagnosed-by: Adrian Hunter <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: f690f4409ddd ("mmc: mmc: Enable CQE's")
Cc: [email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/core/bus.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -376,11 +376,6 @@ void mmc_remove_card(struct mmc_card *ca
mmc_remove_card_debugfs(card);
#endif
- if (host->cqe_enabled) {
- host->cqe_ops->cqe_disable(host);
- host->cqe_enabled = false;
- }
-
if (mmc_card_present(card)) {
if (mmc_host_is_spi(card->host)) {
pr_info("%s: SPI card removed\n",
@@ -393,6 +388,10 @@ void mmc_remove_card(struct mmc_card *ca
of_node_put(card->dev.of_node);
}
+ if (host->cqe_enabled) {
+ host->cqe_ops->cqe_disable(host);
+ host->cqe_enabled = false;
+ }
+
put_device(&card->dev);
}
-
From: Greg Kroah-Hartman <[email protected]>
From: Ruslan Bilovol <[email protected]>
commit 789ea77310f0200c84002884ffd628e2baf3ad8a upstream.
As per UAC2 Audio Data Formats spec (2.3.1.1 USB Packets),
if the sampling rate is a constant, the allowable variation
of number of audio slots per virtual frame is +/- 1 audio slot.
It means that endpoint should be able to accept/send +1 audio
slot.
Previous endpoint max_packet_size calculation code
was adding sometimes +1 audio slot due to DIV_ROUND_UP
behaviour which was rounding up to closest integer.
However this doesn't work if the numbers are divisible.
It had no any impact with Linux hosts which ignore
this issue, but in case of more strict Windows it
caused rejected enumeration
Thus always add +1 audio slot to endpoint's max packet size
Fixes: 913e4a90b6f9 ("usb: gadget: f_uac2: finalize wMaxPacketSize according to bandwidth")
Cc: Peter Chen <[email protected]>
Cc: <[email protected]> #v4.3+
Signed-off-by: Ruslan Bilovol <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/f_uac2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -482,7 +482,7 @@ static int set_ep_max_packet_size(const
}
max_size_bw = num_channels(chmask) * ssize *
- DIV_ROUND_UP(srate, factor / (1 << (ep_desc->bInterval - 1)));
+ ((srate / (factor / (1 << (ep_desc->bInterval - 1)))) + 1);
ep_desc->wMaxPacketSize = cpu_to_le16(min_t(u16, max_size_bw,
max_size_ep));
From: Greg Kroah-Hartman <[email protected]>
From: Matthias Kaehlcke <[email protected]>
commit 2664deb0930643149d61cddbb66ada527ae180bd upstream.
The dwc3-qcom currently enables wakeup interrupts unconditionally
when suspending, however this should not be done when wakeup is
disabled (e.g. through the sysfs attribute power/wakeup). Only
enable wakeup interrupts when device_may_wakeup() returns true.
Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Reviewed-by: Bjorn Andersson <[email protected]>
Signed-off-by: Matthias Kaehlcke <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/20210302103659.v2.1.I44954d9e1169f2cf5c44e6454d357c75ddfa99a2@changeid
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/dwc3-qcom.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -234,8 +234,10 @@ static int dwc3_qcom_suspend(struct dwc3
for (i = qcom->num_clocks - 1; i >= 0; i--)
clk_disable_unprepare(qcom->clks[i]);
+ if (device_may_wakeup(qcom->dev))
+ dwc3_qcom_enable_interrupts(qcom);
+
qcom->is_suspended = true;
- dwc3_qcom_enable_interrupts(qcom);
return 0;
}
@@ -248,7 +250,8 @@ static int dwc3_qcom_resume(struct dwc3_
if (!qcom->is_suspended)
return 0;
- dwc3_qcom_disable_interrupts(qcom);
+ if (device_may_wakeup(qcom->dev))
+ dwc3_qcom_disable_interrupts(qcom);
for (i = 0; i < qcom->num_clocks; i++) {
ret = clk_prepare_enable(qcom->clks[i]);
From: Greg Kroah-Hartman <[email protected]>
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit f6bda644fa3a7070621c3bf12cd657f69a42f170 ]
Kmemleak reports:
unreferenced object 0xc328de40 (size 64):
comm "kworker/1:1", pid 21, jiffies 4294938212 (age 1484.670s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 e0 d8 fc eb 00 00 00 00 ................
00 00 10 fe 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ad758d10>] pci_register_io_range+0x3c/0x80
[<2c7f139e>] of_pci_range_to_resource+0x48/0xc0
[<f079ecc8>] devm_of_pci_get_host_bridge_resources.constprop.0+0x2ac/0x3ac
[<e999753b>] devm_of_pci_bridge_init+0x60/0x1b8
[<a895b229>] devm_pci_alloc_host_bridge+0x54/0x64
[<e451ddb0>] rcar_pcie_probe+0x2c/0x644
In case a PCI host driver's probe is deferred, the same I/O range may be
allocated again, and be ignored, causing a memory leak.
Fix this by (a) letting logic_pio_register_range() return -EEXIST if the
passed range already exists, so pci_register_io_range() will free it, and
by (b) making pci_register_io_range() not consider -EEXIST an error
condition.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/pci.c | 4 ++++
lib/logic_pio.c | 3 +++
2 files changed, 7 insertions(+)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 83fda1987d1f..9ebf32de8575 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3817,6 +3817,10 @@ int pci_register_io_range(struct fwnode_handle *fwnode, phys_addr_t addr,
ret = logic_pio_register_range(range);
if (ret)
kfree(range);
+
+ /* Ignore duplicates due to deferred probing */
+ if (ret == -EEXIST)
+ ret = 0;
#endif
return ret;
diff --git a/lib/logic_pio.c b/lib/logic_pio.c
index 905027574e5d..774bb02fff10 100644
--- a/lib/logic_pio.c
+++ b/lib/logic_pio.c
@@ -27,6 +27,8 @@ static DEFINE_MUTEX(io_range_mutex);
* @new_range: pointer to the IO range to be registered.
*
* Returns 0 on success, the error code in case of failure.
+ * If the range already exists, -EEXIST will be returned, which should be
+ * considered a success.
*
* Register a new IO range node in the IO range list.
*/
@@ -49,6 +51,7 @@ int logic_pio_register_range(struct logic_pio_hwaddr *new_range)
list_for_each_entry(range, &io_range_list, list) {
if (range->fwnode == new_range->fwnode) {
/* range already there */
+ ret = -EEXIST;
goto end_register;
}
if (range->flags == LOGIC_PIO_CPU_MMIO &&
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Pete Zaitcev <[email protected]>
commit 9de2c43acf37a17dc4c69ff78bb099b80fb74325 upstream.
Apparently an application that opens a device and calls select()
on it, will hang if the decice is disconnected. It's a little
surprising that we had this bug for 15 years, but apparently
nobody ever uses select() with a printer: only write() and read(),
and those work fine. Well, you can also select() with a timeout.
The fix is modeled after devio.c. A few other drivers check the
condition first, then do not add the wait queue in case the
device is disconnected. We doubt that's completely race-free.
So, this patch adds the process first, then locks properly
and checks for the disconnect.
Reviewed-by: Zqiang <[email protected]>
Signed-off-by: Pete Zaitcev <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/class/usblp.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -494,16 +494,24 @@ static int usblp_release(struct inode *i
/* No kernel lock - fine */
static __poll_t usblp_poll(struct file *file, struct poll_table_struct *wait)
{
- __poll_t ret;
+ struct usblp *usblp = file->private_data;
+ __poll_t ret = 0;
unsigned long flags;
- struct usblp *usblp = file->private_data;
/* Should we check file->f_mode & FMODE_WRITE before poll_wait()? */
poll_wait(file, &usblp->rwait, wait);
poll_wait(file, &usblp->wwait, wait);
+
+ mutex_lock(&usblp->mut);
+ if (!usblp->present)
+ ret |= EPOLLHUP;
+ mutex_unlock(&usblp->mut);
+
spin_lock_irqsave(&usblp->lock, flags);
- ret = ((usblp->bidir && usblp->rcomplete) ? EPOLLIN | EPOLLRDNORM : 0) |
- ((usblp->no_paper || usblp->wcomplete) ? EPOLLOUT | EPOLLWRNORM : 0);
+ if (usblp->bidir && usblp->rcomplete)
+ ret |= EPOLLIN | EPOLLRDNORM;
+ if (usblp->no_paper || usblp->wcomplete)
+ ret |= EPOLLOUT | EPOLLWRNORM;
spin_unlock_irqrestore(&usblp->lock, flags);
return ret;
}
From: Greg Kroah-Hartman <[email protected]>
From: Stefan Haberland <[email protected]>
commit 66f669a272898feb1c69b770e1504aa2ec7723d1 upstream.
Prevent that an IO request is build during device shutdown initiated by
a driver unbind. This request will never be able to be processed or
canceled and will hang forever. This will lead also to a hanging unbind.
Fix by checking not only if the device is in READY state but also check
that there is no device offline initiated before building a new IO request.
Fixes: e443343e509a ("s390/dasd: blk-mq conversion")
Cc: <[email protected]> # v4.14+
Signed-off-by: Stefan Haberland <[email protected]>
Tested-by: Bjoern Walk <[email protected]>
Reviewed-by: Jan Hoeppner <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/block/dasd.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -2940,7 +2940,8 @@ static blk_status_t do_dasd_request(stru
basedev = block->base;
spin_lock_irq(&dq->lock);
- if (basedev->state < DASD_STATE_READY) {
+ if (basedev->state < DASD_STATE_READY ||
+ test_bit(DASD_FLAG_OFFLINE, &basedev->flags)) {
DBF_DEV_EVENT(DBF_ERR, basedev,
"device not ready for request %p", req);
rc = BLK_STS_IOERR;
From: Greg Kroah-Hartman <[email protected]>
From: Yorick de Wid <[email protected]>
commit 4d8654e81db7346f915eca9f1aff18f385cab621 upstream.
The CDC ACM driver is false matching the Goodix Fingerprint device
against the USB_CDC_ACM_PROTO_AT_V25TER.
The Goodix Fingerprint device is a biometrics sensor that should be
handled in user-space. libfprint has some support for Goodix
fingerprint sensors, although not for this particular one. It is
possible that the vendor allocates a PID per OEM (Lenovo, Dell etc).
If this happens to be the case then more devices from the same vendor
could potentially match the ACM modem module table.
Signed-off-by: Yorick de Wid <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/class/cdc-acm.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1973,6 +1973,11 @@ static const struct usb_device_id acm_id
.driver_info = SEND_ZERO_PACKET,
},
+ /* Exclude Goodix Fingerprint Reader */
+ { USB_DEVICE(0x27c6, 0x5395),
+ .driver_info = IGNORE_DEVICE,
+ },
+
/* control interfaces without any protocol set */
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
USB_CDC_PROTO_NONE) },
From: Greg Kroah-Hartman <[email protected]>
From: Yoshihiro Shimoda <[email protected]>
commit b1d25e6ee57c2605845595b6c61340d734253eb3 upstream.
According to the datasheet, this controller has a restriction
which "set an endpoint number so that combinations of the DIR bit and
the EPNUM bits do not overlap.". However, since the udc core driver is
possible to assign a bulk pipe as an interrupt endpoint, an endpoint
number may not match the pipe number. After that, when user rebinds
another gadget driver, this driver broke the restriction because
the driver didn't clear any configuration in usb_ep_disable().
Example:
# modprobe g_ncm
Then, EP3 = pipe 3, EP4 = pipe 4, EP5 = pipe 6
# rmmod g_ncm
# modprobe g_hid
Then, EP3 = pipe 6, EP4 = pipe 7.
So, pipe 3 and pipe 6 are set as EP3.
So, clear PIPECFG register in usbhs_pipe_free().
Fixes: dfb87b8bfe09 ("usb: renesas_usbhs: gadget: fix re-enabling pipe without re-connecting")
Cc: stable <[email protected]>
Signed-off-by: Yoshihiro Shimoda <[email protected]>
Link: https://lore.kernel.org/r/1615168538-26101-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/renesas_usbhs/pipe.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/renesas_usbhs/pipe.c
+++ b/drivers/usb/renesas_usbhs/pipe.c
@@ -746,6 +746,8 @@ struct usbhs_pipe *usbhs_pipe_malloc(str
void usbhs_pipe_free(struct usbhs_pipe *pipe)
{
+ usbhsp_pipe_select(pipe);
+ usbhsp_pipe_cfg_set(pipe, 0xFFFF, 0);
usbhsp_put_pipe(pipe);
}
From: Greg Kroah-Hartman <[email protected]>
From: Takashi Iwai <[email protected]>
commit 5ff9dde42e8c72ed8102eb8cb62e03f9dc2103ab upstream.
When HD-audio bus receives unsolicited events during its system
suspend/resume (S3 and S4) phase, the controller driver may still try
to process events although the codec chips are already (or yet)
powered down. This might screw up the codec communication, resulting
in CORB/RIRB errors. Such events should be rather skipped, as the
codec chip status such as the jack status will be fully refreshed at
the system resume time.
Since we're tracking the system suspend/resume state in codec
power.power_state field, let's add the check in the common unsol event
handler entry point to filter out such events.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1182377
Tested-by: Abhishek Sahu <[email protected]>
Cc: <[email protected]> # 183ab39eb0ea: ALSA: hda: Initialize power_state
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/hda_bind.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/sound/pci/hda/hda_bind.c
+++ b/sound/pci/hda/hda_bind.c
@@ -46,6 +46,10 @@ static void hda_codec_unsol_event(struct
if (codec->bus->shutdown)
return;
+ /* ignore unsol events during system suspend/resume */
+ if (codec->core.dev.power.power_state.event != PM_EVENT_ON)
+ return;
+
if (codec->patch_ops.unsol_event)
codec->patch_ops.unsol_event(codec, ev);
}
From: Greg Kroah-Hartman <[email protected]>
From: Stefan Haberland <[email protected]>
commit 7d365bd0bff3c0310c39ebaffc9a8458e036d666 upstream.
In case of an unbind of the DASD device driver the function
dasd_generic_remove() is called which shuts down the device.
Among others this functions removes the int_handler from the cdev.
During shutdown the device cancels all outstanding IO requests and waits
for completion of the clear request.
Unfortunately the clear interrupt will never be received when there is no
interrupt handler connected.
Fix by moving the int_handler removal after the call to the state machine
where no request or interrupt is outstanding.
Cc: [email protected]
Signed-off-by: Stefan Haberland <[email protected]>
Tested-by: Bjoern Walk <[email protected]>
Reviewed-by: Jan Hoeppner <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/block/dasd.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -3426,8 +3426,6 @@ void dasd_generic_remove(struct ccw_devi
struct dasd_device *device;
struct dasd_block *block;
- cdev->handler = NULL;
-
device = dasd_device_from_cdev(cdev);
if (IS_ERR(device)) {
dasd_remove_sysfs_files(cdev);
@@ -3446,6 +3444,7 @@ void dasd_generic_remove(struct ccw_devi
* no quite down yet.
*/
dasd_set_target_state(device, DASD_STATE_NEW);
+ cdev->handler = NULL;
/* dasd_delete_device destroys the device reference. */
block = device->block;
dasd_delete_device(device);
From: Greg Kroah-Hartman <[email protected]>
From: Ruslan Bilovol <[email protected]>
commit cc2ac63d4cf72104e0e7f58bb846121f0f51bb19 upstream.
There is missing playback stop/cleanup in case of
gadget's ->disable callback that happens on
events like USB host resetting or gadget disconnection
Fixes: 0591bc236015 ("usb: gadget: add f_uac1 variant based on a new u_audio api")
Cc: <[email protected]> # 4.13+
Signed-off-by: Ruslan Bilovol <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/f_uac1.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/gadget/function/f_uac1.c
+++ b/drivers/usb/gadget/function/f_uac1.c
@@ -499,6 +499,7 @@ static void f_audio_disable(struct usb_f
uac1->as_out_alt = 0;
uac1->as_in_alt = 0;
+ u_audio_stop_playback(&uac1->g_audio);
u_audio_stop_capture(&uac1->g_audio);
}
From: Greg Kroah-Hartman <[email protected]>
From: Eric W. Biederman <[email protected]>
commit 3b0c2d3eaa83da259d7726192cf55a137769012f upstream.
It turns out that there are in fact userspace implementations that
care and this recent change caused a regression.
https://github.com/containers/buildah/issues/3071
As the motivation for the original change was future development,
and the impact is existing real world code just revert this change
and allow the ambiguity in v3 file caps.
Cc: [email protected]
Fixes: 95ebabde382c ("capabilities: Don't allow writing ambiguous v3 file capabilities")
Signed-off-by: Eric W. Biederman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/commoncap.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -506,8 +506,7 @@ int cap_convert_nscap(struct dentry *den
__u32 magic, nsmagic;
struct inode *inode = d_backing_inode(dentry);
struct user_namespace *task_ns = current_user_ns(),
- *fs_ns = inode->i_sb->s_user_ns,
- *ancestor;
+ *fs_ns = inode->i_sb->s_user_ns;
kuid_t rootid;
size_t newsize;
@@ -530,15 +529,6 @@ int cap_convert_nscap(struct dentry *den
if (nsrootid == -1)
return -EINVAL;
- /*
- * Do not allow allow adding a v3 filesystem capability xattr
- * if the rootid field is ambiguous.
- */
- for (ancestor = task_ns->parent; ancestor; ancestor = ancestor->parent) {
- if (from_kuid(ancestor, rootid) == 0)
- return -EINVAL;
- }
-
newsize = sizeof(struct vfs_ns_cap_data);
nscap = kmalloc(newsize, GFP_ATOMIC);
if (!nscap)
From: Greg Kroah-Hartman <[email protected]>
From: Steven J. Magnani <[email protected]>
[ Upstream commit 63c9e47a1642fc817654a1bc18a6ec4bbcc0f056 ]
When extending a file, udf_do_extend_file() may enter following empty
indirect extent. At the end of udf_do_extend_file() we revert prev_epos
to point to the last written extent. However if we end up not adding any
further extent in udf_do_extend_file(), the reverting points prev_epos
into the header area of the AED and following updates of the extents
(in udf_update_extents()) will corrupt the header.
Make sure that we do not follow indirect extent if we are not going to
add any more extents so that returning back to the last written extent
works correctly.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Steven J. Magnani <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/udf/inode.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index 3bf89a633836..f5500d2a3879 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -540,11 +540,14 @@ static int udf_do_extend_file(struct inode *inode,
udf_write_aext(inode, last_pos, &last_ext->extLocation,
last_ext->extLength, 1);
+
/*
- * We've rewritten the last extent but there may be empty
- * indirect extent after it - enter it.
+ * We've rewritten the last extent. If we are going to add
+ * more extents, we may need to enter possible following
+ * empty indirect extent.
*/
- udf_next_aext(inode, last_pos, &tmploc, &tmplen, 0);
+ if (new_block_bytes || prealloc_len)
+ udf_next_aext(inode, last_pos, &tmploc, &tmplen, 0);
}
/* Managed to do everything necessary? */
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Dan Carpenter <[email protected]>
commit 650bf52208d804ad5ee449c58102f8dc43175573 upstream.
If the string is invalid, this should return -EINVAL instead of 0.
Fixes: 73517cf49bd4 ("usb: gadget: add RNDIS configfs options for class/subclass/protocol")
Cc: stable <[email protected]>
Acked-by: Lorenzo Colitti <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/YCqZ3P53yyIg5cn7@mwanda
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/u_ether_configfs.h | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/usb/gadget/function/u_ether_configfs.h
+++ b/drivers/usb/gadget/function/u_ether_configfs.h
@@ -169,12 +169,11 @@ out: \
size_t len) \
{ \
struct f_##_f_##_opts *opts = to_f_##_f_##_opts(item); \
- int ret; \
+ int ret = -EINVAL; \
u8 val; \
\
mutex_lock(&opts->lock); \
- ret = sscanf(page, "%02hhx", &val); \
- if (ret > 0) { \
+ if (sscanf(page, "%02hhx", &val) > 0) { \
opts->_n_ = val; \
ret = len; \
} \
From: Greg Kroah-Hartman <[email protected]>
From: Guangbin Huang <[email protected]>
[ Upstream commit d9032dba5a2b2bbf0fdce67c8795300ec9923b43 ]
If phy uses generic driver and autoneg is on, enter command
"ethtool -s eth0 speed 50" will not change phy speed actually, but
command "ethtool eth0" shows speed is 50Mb/s because phydev->speed
has been set to 50 and no update later.
And duplex setting has same problem too.
However, if autoneg is on, phy only changes speed and duplex according to
phydev->advertising, but not phydev->speed and phydev->duplex. So in this
case, phydev->speed and phydev->duplex don't need to be set in function
phy_ethtool_ksettings_set() if autoneg is on.
Fixes: 51e2a3846eab ("PHY: Avoid unnecessary aneg restarts")
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/phy.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index cc454b8c032c..dd4bf4265a5e 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -335,7 +335,10 @@ int phy_ethtool_ksettings_set(struct phy_device *phydev,
phydev->autoneg = autoneg;
- phydev->speed = speed;
+ if (autoneg == AUTONEG_DISABLE) {
+ phydev->speed = speed;
+ phydev->duplex = duplex;
+ }
phydev->advertising = advertising;
@@ -344,8 +347,6 @@ int phy_ethtool_ksettings_set(struct phy_device *phydev,
else
phydev->advertising &= ~ADVERTISED_Autoneg;
- phydev->duplex = duplex;
-
phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl;
/* Restart the PHY */
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Maximilian Heyne <[email protected]>
commit bfc2560563586372212b0a8aeca7428975fa91fe upstream.
This is a follow up of commit ea3274695353 ("net: sched: avoid
duplicates in qdisc dump") which has fixed the issue only for the qdisc
dump.
The duplicate printing also occurs when dumping the classes via
tc class show dev eth0
Fixes: 59cc1f61f09c ("net: sched: convert qdisc linked list to hashtable")
Signed-off-by: Maximilian Heyne <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/sch_api.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -2048,7 +2048,7 @@ static int tc_dump_tclass_qdisc(struct Q
static int tc_dump_tclass_root(struct Qdisc *root, struct sk_buff *skb,
struct tcmsg *tcm, struct netlink_callback *cb,
- int *t_p, int s_t)
+ int *t_p, int s_t, bool recur)
{
struct Qdisc *q;
int b;
@@ -2059,7 +2059,7 @@ static int tc_dump_tclass_root(struct Qd
if (tc_dump_tclass_qdisc(root, skb, tcm, cb, t_p, s_t) < 0)
return -1;
- if (!qdisc_dev(root))
+ if (!qdisc_dev(root) || !recur)
return 0;
if (tcm->tcm_parent) {
@@ -2094,13 +2094,13 @@ static int tc_dump_tclass(struct sk_buff
s_t = cb->args[0];
t = 0;
- if (tc_dump_tclass_root(dev->qdisc, skb, tcm, cb, &t, s_t) < 0)
+ if (tc_dump_tclass_root(dev->qdisc, skb, tcm, cb, &t, s_t, true) < 0)
goto done;
dev_queue = dev_ingress_queue(dev);
if (dev_queue &&
tc_dump_tclass_root(dev_queue->qdisc_sleeping, skb, tcm, cb,
- &t, s_t) < 0)
+ &t, s_t, false) < 0)
goto done;
done:
From: Greg Kroah-Hartman <[email protected]>
From: Forest Crossman <[email protected]>
commit b71c669ad8390dd1c866298319ff89fe68b45653 upstream.
I've confirmed that both the ASMedia ASM1042A and ASM3242 have the same
problem as the ASM1142 and ASM2142/ASM3142, where they lose some of the
upper bits of 64-bit DMA addresses. As with the other chips, this can
cause problems on systems where the upper bits matter, and adding the
XHCI_NO_64BIT_SUPPORT quirk completely fixes the issue.
Cc: [email protected]
Signed-off-by: Forest Crossman <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-pci.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -53,6 +53,7 @@
#define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142
#define PCI_DEVICE_ID_ASMEDIA_1142_XHCI 0x1242
#define PCI_DEVICE_ID_ASMEDIA_2142_XHCI 0x2142
+#define PCI_DEVICE_ID_ASMEDIA_3242_XHCI 0x3242
static const char hcd_name[] = "xhci_hcd";
@@ -237,11 +238,14 @@ static void xhci_pci_quirks(struct devic
pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI)
xhci->quirks |= XHCI_BROKEN_STREAMS;
if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
- pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI)
+ pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) {
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+ xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
+ }
if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
(pdev->device == PCI_DEVICE_ID_ASMEDIA_1142_XHCI ||
- pdev->device == PCI_DEVICE_ID_ASMEDIA_2142_XHCI))
+ pdev->device == PCI_DEVICE_ID_ASMEDIA_2142_XHCI ||
+ pdev->device == PCI_DEVICE_ID_ASMEDIA_3242_XHCI))
xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
From: Greg Kroah-Hartman <[email protected]>
From: Shuah Khan <[email protected]>
commit 46613c9dfa964c0c60b5385dbdf5aaa18be52a9c upstream.
usbip_sockfd_store() is invoked when user requests attach (import)
detach (unimport) usb gadget device from usbip host. vhci_hcd sends
import request and usbip_sockfd_store() exports the device if it is
free for export.
Export and unexport are governed by local state and shared state
- Shared state (usbip device status, sockfd) - sockfd and Device
status are used to determine if stub should be brought up or shut
down. Device status is shared between host and client.
- Local state (tcp_socket, rx and tx thread task_struct ptrs)
A valid tcp_socket controls rx and tx thread operations while the
device is in exported state.
- While the device is exported, device status is marked used and socket,
sockfd, and thread pointers are valid.
Export sequence (stub-up) includes validating the socket and creating
receive (rx) and transmit (tx) threads to talk to the client to provide
access to the exported device. rx and tx threads depends on local and
shared state to be correct and in sync.
Unexport (stub-down) sequence shuts the socket down and stops the rx and
tx threads. Stub-down sequence relies on local and shared states to be
in sync.
There are races in updating the local and shared status in the current
stub-up sequence resulting in crashes. These stem from starting rx and
tx threads before local and global state is updated correctly to be in
sync.
1. Doesn't handle kthread_create() error and saves invalid ptr in local
state that drives rx and tx threads.
2. Updates tcp_socket and sockfd, starts stub_rx and stub_tx threads
before updating usbip_device status to SDEV_ST_USED. This opens up a
race condition between the threads and usbip_sockfd_store() stub up
and down handling.
Fix the above problems:
- Stop using kthread_get_run() macro to create/start threads.
- Create threads and get task struct reference.
- Add kthread_create() failure handling and bail out.
- Hold usbip_device lock to update local and shared states after
creating rx and tx threads.
- Update usbip_device status to SDEV_ST_USED.
- Update usbip_device tcp_socket, sockfd, tcp_rx, and tcp_tx
- Start threads after usbip_device (tcp_socket, sockfd, tcp_rx, tcp_tx,
and status) is complete.
Credit goes to syzbot and Tetsuo Handa for finding and root-causing the
kthread_get_run() improper error handling problem and others. This is a
hard problem to find and debug since the races aren't seen in a normal
case. Fuzzing forces the race window to be small enough for the
kthread_get_run() error path bug and starting threads before updating the
local and shared state bug in the stub-up sequence.
Fixes: 9720b4bc76a83807 ("staging/usbip: convert to kthread")
Cc: [email protected]
Reported-by: syzbot <[email protected]>
Reported-by: syzbot <[email protected]>
Reported-by: syzbot <[email protected]>
Reported-by: Tetsuo Handa <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/b1c08b983ffa185449c9f0f7d1021dc8c8454b60.1615171203.git.skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/usbip/vudc_sysfs.c | 42 +++++++++++++++++++++++++++++++++--------
1 file changed, 34 insertions(+), 8 deletions(-)
--- a/drivers/usb/usbip/vudc_sysfs.c
+++ b/drivers/usb/usbip/vudc_sysfs.c
@@ -91,8 +91,9 @@ unlock:
}
static BIN_ATTR_RO(dev_desc, sizeof(struct usb_device_descriptor));
-static ssize_t usbip_sockfd_store(struct device *dev, struct device_attribute *attr,
- const char *in, size_t count)
+static ssize_t usbip_sockfd_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *in, size_t count)
{
struct vudc *udc = (struct vudc *) dev_get_drvdata(dev);
int rv;
@@ -101,6 +102,8 @@ static ssize_t usbip_sockfd_store(struct
struct socket *socket;
unsigned long flags;
int ret;
+ struct task_struct *tcp_rx = NULL;
+ struct task_struct *tcp_tx = NULL;
rv = kstrtoint(in, 0, &sockfd);
if (rv != 0)
@@ -146,24 +149,47 @@ static ssize_t usbip_sockfd_store(struct
goto sock_err;
}
- udc->ud.tcp_socket = socket;
-
+ /* unlock and create threads and get tasks */
spin_unlock_irq(&udc->ud.lock);
spin_unlock_irqrestore(&udc->lock, flags);
- udc->ud.tcp_rx = kthread_get_run(&v_rx_loop,
- &udc->ud, "vudc_rx");
- udc->ud.tcp_tx = kthread_get_run(&v_tx_loop,
- &udc->ud, "vudc_tx");
+ tcp_rx = kthread_create(&v_rx_loop, &udc->ud, "vudc_rx");
+ if (IS_ERR(tcp_rx)) {
+ sockfd_put(socket);
+ return -EINVAL;
+ }
+ tcp_tx = kthread_create(&v_tx_loop, &udc->ud, "vudc_tx");
+ if (IS_ERR(tcp_tx)) {
+ kthread_stop(tcp_rx);
+ sockfd_put(socket);
+ return -EINVAL;
+ }
+
+ /* get task structs now */
+ get_task_struct(tcp_rx);
+ get_task_struct(tcp_tx);
+ /* lock and update udc->ud state */
spin_lock_irqsave(&udc->lock, flags);
spin_lock_irq(&udc->ud.lock);
+
+ udc->ud.tcp_socket = socket;
+ udc->ud.tcp_rx = tcp_rx;
+ udc->ud.tcp_rx = tcp_tx;
udc->ud.status = SDEV_ST_USED;
+
spin_unlock_irq(&udc->ud.lock);
ktime_get_ts64(&udc->start_time);
v_start_timer(udc);
udc->connected = 1;
+
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ wake_up_process(udc->ud.tcp_rx);
+ wake_up_process(udc->ud.tcp_tx);
+ return count;
+
} else {
if (!udc->connected) {
dev_err(dev, "Device not connected");
From: Greg Kroah-Hartman <[email protected]>
From: Heiko Carstens <[email protected]>
[ Upstream commit 62c8dca9e194326802b43c60763f856d782b225c ]
Avoid a potentially large stack frame and overflow by making
"cpumask_t avail" a static variable. There is no concurrent
access due to the existing locking.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/kernel/smp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index c47bd581a08a..bce678c7179c 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -751,7 +751,7 @@ static int smp_add_core(struct sclp_core_entry *core, cpumask_t *avail,
static int __smp_rescan_cpus(struct sclp_core_info *info, bool early)
{
struct sclp_core_entry *core;
- cpumask_t avail;
+ static cpumask_t avail;
bool configured;
u16 core_id;
int nr, i;
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Takashi Iwai <[email protected]>
commit fec60c3bc5d1713db2727cdffc638d48f9c07dc3 upstream.
Dell AE515 sound bar (413c:a506) spews the error messages when the
driver tries to read the current sample frequency, hence it needs to
be on the list in snd_usb_get_sample_rate_quirk().
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211551
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/quirks.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1186,6 +1186,7 @@ bool snd_usb_get_sample_rate_quirk(struc
case USB_ID(0x1901, 0x0191): /* GE B850V3 CP2114 audio interface */
case USB_ID(0x21B4, 0x0081): /* AudioQuest DragonFly */
case USB_ID(0x2912, 0x30c8): /* Audioengine D1 */
+ case USB_ID(0x413c, 0xa506): /* Dell AE515 sound bar */
return true;
}
From: Greg Kroah-Hartman <[email protected]>
From: Aleksandr Miloserdov <[email protected]>
[ Upstream commit 1c73e0c5e54d5f7d77f422a10b03ebe61eaed5ad ]
TCM doesn't properly handle underflow case for service actions. One way to
prevent it is to always complete command with
target_complete_cmd_with_length(), however it requires access to data_sg,
which is not always available.
This change introduces target_set_cmd_data_length() function which allows
to set command data length before completing it.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Roman Bolshakov <[email protected]>
Reviewed-by: Bodo Stroesser <[email protected]>
Signed-off-by: Aleksandr Miloserdov <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/target/target_core_transport.c | 15 +++++++++++----
include/target/target_core_backend.h | 1 +
2 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index f1b730b77a31..bdada97cd4fe 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -841,11 +841,9 @@ void target_complete_cmd(struct se_cmd *cmd, u8 scsi_status)
}
EXPORT_SYMBOL(target_complete_cmd);
-void target_complete_cmd_with_length(struct se_cmd *cmd, u8 scsi_status, int length)
+void target_set_cmd_data_length(struct se_cmd *cmd, int length)
{
- if ((scsi_status == SAM_STAT_GOOD ||
- cmd->se_cmd_flags & SCF_TREAT_READ_AS_NORMAL) &&
- length < cmd->data_length) {
+ if (length < cmd->data_length) {
if (cmd->se_cmd_flags & SCF_UNDERFLOW_BIT) {
cmd->residual_count += cmd->data_length - length;
} else {
@@ -855,6 +853,15 @@ void target_complete_cmd_with_length(struct se_cmd *cmd, u8 scsi_status, int len
cmd->data_length = length;
}
+}
+EXPORT_SYMBOL(target_set_cmd_data_length);
+
+void target_complete_cmd_with_length(struct se_cmd *cmd, u8 scsi_status, int length)
+{
+ if (scsi_status == SAM_STAT_GOOD ||
+ cmd->se_cmd_flags & SCF_TREAT_READ_AS_NORMAL) {
+ target_set_cmd_data_length(cmd, length);
+ }
target_complete_cmd(cmd, scsi_status);
}
diff --git a/include/target/target_core_backend.h b/include/target/target_core_backend.h
index 51b6f50eabee..0deeff9b4496 100644
--- a/include/target/target_core_backend.h
+++ b/include/target/target_core_backend.h
@@ -69,6 +69,7 @@ int transport_backend_register(const struct target_backend_ops *);
void target_backend_unregister(const struct target_backend_ops *);
void target_complete_cmd(struct se_cmd *, u8);
+void target_set_cmd_data_length(struct se_cmd *, int);
void target_complete_cmd_with_length(struct se_cmd *, u8, int);
void transport_copy_sense_to_cmd(struct se_cmd *, unsigned char *);
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Shuah Khan <[email protected]>
commit f55a0571690c4aae03180e001522538c0927432f upstream.
Fix attach_store() to validate the passed in file descriptor is a
stream socket. If the file descriptor passed was a SOCK_DGRAM socket,
sock_recvmsg() can't detect end of stream.
Cc: [email protected]
Suggested-by: Tetsuo Handa <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/52712aa308915bda02cece1589e04ee8b401d1f3.1615171203.git.skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/usbip/vhci_sysfs.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/drivers/usb/usbip/vhci_sysfs.c
+++ b/drivers/usb/usbip/vhci_sysfs.c
@@ -349,8 +349,16 @@ static ssize_t attach_store(struct devic
/* Extract socket from fd. */
socket = sockfd_lookup(sockfd, &err);
- if (!socket)
+ if (!socket) {
+ dev_err(dev, "failed to lookup sock");
return -EINVAL;
+ }
+ if (socket->type != SOCK_STREAM) {
+ dev_err(dev, "Expecting SOCK_STREAM - found %d",
+ socket->type);
+ sockfd_put(socket);
+ return -EINVAL;
+ }
/* now need lock until setting vdev status as used */
From: Greg Kroah-Hartman <[email protected]>
From: Ian Abbott <[email protected]>
commit 25317f428a78fde71b2bf3f24d05850f08a73a52 upstream.
The Change-Of-State (COS) subdevice supports Comedi asynchronous
commands to read 16-bit change-of-state values. However, the interrupt
handler is calling `comedi_buf_write_samples()` with the address of a
32-bit integer `&s->state`. On bigendian architectures, it will copy 2
bytes from the wrong end of the 32-bit integer. Fix it by transferring
the value via a 16-bit integer.
Fixes: 6bb45f2b0c86 ("staging: comedi: addi_apci_1032: use comedi_buf_write_samples()")
Cc: <[email protected]> # 3.19+
Signed-off-by: Ian Abbott <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/drivers/addi_apci_1032.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/staging/comedi/drivers/addi_apci_1032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1032.c
@@ -260,6 +260,7 @@ static irqreturn_t apci1032_interrupt(in
struct apci1032_private *devpriv = dev->private;
struct comedi_subdevice *s = dev->read_subdev;
unsigned int ctrl;
+ unsigned short val;
/* check interrupt is from this device */
if ((inl(devpriv->amcc_iobase + AMCC_OP_REG_INTCSR) &
@@ -275,7 +276,8 @@ static irqreturn_t apci1032_interrupt(in
outl(ctrl & ~APCI1032_CTRL_INT_ENA, dev->iobase + APCI1032_CTRL_REG);
s->state = inl(dev->iobase + APCI1032_STATUS_REG) & 0xffff;
- comedi_buf_write_samples(s, &s->state, 1);
+ val = s->state;
+ comedi_buf_write_samples(s, &val, 1);
comedi_handle_events(dev, s);
/* enable the interrupt */
From: Greg Kroah-Hartman <[email protected]>
From: Dan Carpenter <[email protected]>
commit d4ac640322b06095128a5c45ba4a1e80929fe7f3 upstream.
The "ie_len" is a value in the 1-255 range that comes from the user. We
have to cap it to ensure that it's not too large or it could lead to
memory corruption.
Fixes: 9a7fe54ddc3a ("staging: r8188eu: Add source files for new driver - part 1")
Signed-off-by: Dan Carpenter <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/YEHyQCrFZKTXyT7J@mwanda
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/rtl8188eu/core/rtw_ap.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/staging/rtl8188eu/core/rtw_ap.c
+++ b/drivers/staging/rtl8188eu/core/rtw_ap.c
@@ -794,6 +794,7 @@ int rtw_check_beacon_data(struct adapter
/* SSID */
p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _SSID_IE_, &ie_len, (pbss_network->ie_length - _BEACON_IE_OFFSET_));
if (p && ie_len > 0) {
+ ie_len = min_t(int, ie_len, sizeof(pbss_network->Ssid.Ssid));
memset(&pbss_network->Ssid, 0, sizeof(struct ndis_802_11_ssid));
memcpy(pbss_network->Ssid.Ssid, (p + 2), ie_len);
pbss_network->Ssid.SsidLength = ie_len;
@@ -812,6 +813,7 @@ int rtw_check_beacon_data(struct adapter
/* get supported rates */
p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _SUPPORTEDRATES_IE_, &ie_len, (pbss_network->ie_length - _BEACON_IE_OFFSET_));
if (p) {
+ ie_len = min_t(int, ie_len, NDIS_802_11_LENGTH_RATES_EX);
memcpy(supportRate, p + 2, ie_len);
supportRateNum = ie_len;
}
@@ -819,6 +821,8 @@ int rtw_check_beacon_data(struct adapter
/* get ext_supported rates */
p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _EXT_SUPPORTEDRATES_IE_, &ie_len, pbss_network->ie_length - _BEACON_IE_OFFSET_);
if (p) {
+ ie_len = min_t(int, ie_len,
+ NDIS_802_11_LENGTH_RATES_EX - supportRateNum);
memcpy(supportRate + supportRateNum, p + 2, ie_len);
supportRateNum += ie_len;
}
@@ -932,6 +936,7 @@ int rtw_check_beacon_data(struct adapter
pht_cap->mcs.rx_mask[0] = 0xff;
pht_cap->mcs.rx_mask[1] = 0x0;
+ ie_len = min_t(int, ie_len, sizeof(pmlmepriv->htpriv.ht_cap));
memcpy(&pmlmepriv->htpriv.ht_cap, p+2, ie_len);
}
From: Greg Kroah-Hartman <[email protected]>
From: Dan Carpenter <[email protected]>
commit e163b9823a0b08c3bb8dc4f5b4b5c221c24ec3e5 upstream.
The user can specify a "req->essid_len" of up to 255 but if it's
over IW_ESSID_MAX_SIZE (32) that can lead to memory corruption.
Fixes: 13a9930d15b4 ("staging: ks7010: add driver from Nanonote extra-repository")
Signed-off-by: Dan Carpenter <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/YD4fS8+HmM/Qmrw6@mwanda
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/ks7010/ks_wlan_net.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/staging/ks7010/ks_wlan_net.c
+++ b/drivers/staging/ks7010/ks_wlan_net.c
@@ -1120,6 +1120,7 @@ static int ks_wlan_set_scan(struct net_d
{
struct ks_wlan_private *priv = netdev_priv(dev);
struct iw_scan_req *req = NULL;
+ int len;
if (priv->sleep_mode == SLP_SLEEP)
return -EPERM;
@@ -1129,8 +1130,9 @@ static int ks_wlan_set_scan(struct net_d
if (wrqu->data.length == sizeof(struct iw_scan_req) &&
wrqu->data.flags & IW_SCAN_THIS_ESSID) {
req = (struct iw_scan_req *)extra;
- priv->scan_ssid_len = req->essid_len;
- memcpy(priv->scan_ssid, req->essid, priv->scan_ssid_len);
+ len = min_t(int, req->essid_len, IW_ESSID_MAX_SIZE);
+ priv->scan_ssid_len = len;
+ memcpy(priv->scan_ssid, req->essid, len);
} else {
priv->scan_ssid_len = 0;
}
From: Greg Kroah-Hartman <[email protected]>
From: Dan Carpenter <[email protected]>
commit 74b6b20df8cfe90ada777d621b54c32e69e27cd7 upstream.
This code has a check to prevent read overflow but it needs another
check to prevent writing beyond the end of the ->ssid[] array.
Fixes: a2c60d42d97c ("staging: r8188eu: Add files for new driver - part 16")
Signed-off-by: Dan Carpenter <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/YEHymwsnHewzoam7@mwanda
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c
+++ b/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c
@@ -1161,9 +1161,11 @@ static int rtw_wx_set_scan(struct net_de
break;
}
sec_len = *(pos++); len -= 1;
- if (sec_len > 0 && sec_len <= len) {
+ if (sec_len > 0 &&
+ sec_len <= len &&
+ sec_len <= 32) {
ssid[ssid_index].SsidLength = sec_len;
- memcpy(ssid[ssid_index].Ssid, pos, ssid[ssid_index].SsidLength);
+ memcpy(ssid[ssid_index].Ssid, pos, sec_len);
ssid_index++;
}
pos += sec_len;
From: Greg Kroah-Hartman <[email protected]>
From: Daniele Palmas <[email protected]>
commit 6c59cff38e66584ae3ac6c2f0cbd8d039c710ba7 upstream.
There's no reason for preventing the creation and removal
of qmimux network interfaces when the underlying interface
is up.
This makes qmi_wwan mux implementation more similar to the
rmnet one, simplifying userspace management of the same
logical interfaces.
Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support")
Reported-by: Aleksander Morgado <[email protected]>
Signed-off-by: Daniele Palmas <[email protected]>
Acked-by: Bjørn Mork <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/qmi_wwan.c | 14 --------------
1 file changed, 14 deletions(-)
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -378,13 +378,6 @@ static ssize_t add_mux_store(struct devi
goto err;
}
- /* we don't want to modify a running netdev */
- if (netif_running(dev->net)) {
- netdev_err(dev->net, "Cannot change a running device\n");
- ret = -EBUSY;
- goto err;
- }
-
ret = qmimux_register_device(dev->net, mux_id);
if (!ret) {
info->flags |= QMI_WWAN_FLAG_MUX;
@@ -414,13 +407,6 @@ static ssize_t del_mux_store(struct devi
if (!rtnl_trylock())
return restart_syscall();
- /* we don't want to modify a running netdev */
- if (netif_running(dev->net)) {
- netdev_err(dev->net, "Cannot change a running device\n");
- ret = -EBUSY;
- goto err;
- }
-
del_dev = qmimux_find_dev(dev, mux_id);
if (!del_dev) {
netdev_err(dev->net, "mux_id not present\n");
From: Greg Kroah-Hartman <[email protected]>
From: Dan Carpenter <[email protected]>
commit 87107518d7a93fec6cdb2559588862afeee800fb upstream.
We need to cap len at IW_ESSID_MAX_SIZE (32) to avoid memory corruption.
This can be controlled by the user via the ioctl.
Fixes: 5f53d8ca3d5d ("Staging: add rtl8192SU wireless usb driver")
Signed-off-by: Dan Carpenter <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/YEHoAWMOSZBUw91F@mwanda
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/rtl8192u/r8192U_wx.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/staging/rtl8192u/r8192U_wx.c
+++ b/drivers/staging/rtl8192u/r8192U_wx.c
@@ -333,8 +333,10 @@ static int r8192_wx_set_scan(struct net_
struct iw_scan_req *req = (struct iw_scan_req *)b;
if (req->essid_len) {
- ieee->current_network.ssid_len = req->essid_len;
- memcpy(ieee->current_network.ssid, req->essid, req->essid_len);
+ int len = min_t(int, req->essid_len, IW_ESSID_MAX_SIZE);
+
+ ieee->current_network.ssid_len = len;
+ memcpy(ieee->current_network.ssid, req->essid, len);
}
}
From: Greg Kroah-Hartman <[email protected]>
From: Pavel Skripkin <[email protected]>
commit cfdc67acc785e01a8719eeb7012709d245564701 upstream.
sysbot found memory leak in edge_startup().
The problem was that when an error was received from the usb_submit_urb(),
nothing was cleaned up.
Reported-by: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Fixes: 6e8cf7751f9f ("USB: add EPIC support to the io_edgeport driver")
Cc: [email protected] # 2.6.21: c5c0c55598ce
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/io_edgeport.c | 26 ++++++++++++++++----------
1 file changed, 16 insertions(+), 10 deletions(-)
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -3021,26 +3021,32 @@ static int edge_startup(struct usb_seria
response = -ENODEV;
}
- usb_free_urb(edge_serial->interrupt_read_urb);
- kfree(edge_serial->interrupt_in_buffer);
-
- usb_free_urb(edge_serial->read_urb);
- kfree(edge_serial->bulk_in_buffer);
-
- kfree(edge_serial);
-
- return response;
+ goto error;
}
/* start interrupt read for this edgeport this interrupt will
* continue as long as the edgeport is connected */
response = usb_submit_urb(edge_serial->interrupt_read_urb,
GFP_KERNEL);
- if (response)
+ if (response) {
dev_err(ddev, "%s - Error %d submitting control urb\n",
__func__, response);
+
+ goto error;
+ }
}
return response;
+
+error:
+ usb_free_urb(edge_serial->interrupt_read_urb);
+ kfree(edge_serial->interrupt_in_buffer);
+
+ usb_free_urb(edge_serial->read_urb);
+ kfree(edge_serial->bulk_in_buffer);
+
+ kfree(edge_serial);
+
+ return response;
}
From: Greg Kroah-Hartman <[email protected]>
From: Niv Sardi <[email protected]>
commit 5563b3b6420362c8a1f468ca04afe6d5f0a8d0a3 upstream.
Add PID for CH340 that's found on cheap programmers.
The driver works flawlessly as soon as the new PID (0x9986) is added to it.
These look like ANU232MI but ship with a ch341 inside. They have no special
identifiers (mine only has the string "DB9D20130716" printed on the PCB and
nothing identifiable on the packaging. The merchant i bought it from
doesn't sell these anymore).
the lsusb -v output is:
Bus 001 Device 009: ID 9986:7523
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x9986
idProduct 0x7523
bcdDevice 2.54
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0027
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 96mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 2
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 1
Signed-off-by: Niv Sardi <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/ch341.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -85,6 +85,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(0x1a86, 0x7522) },
{ USB_DEVICE(0x1a86, 0x7523) },
{ USB_DEVICE(0x4348, 0x5523) },
+ { USB_DEVICE(0x9986, 0x7523) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
From: Greg Kroah-Hartman <[email protected]>
From: Sebastian Reichel <[email protected]>
commit 42213a0190b535093a604945db05a4225bf43885 upstream.
GE CS1000 has some more custom USB IDs for CP2102N; add them
to the driver to have working auto-probing.
Signed-off-by: Sebastian Reichel <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/cp210x.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -203,6 +203,8 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(0x1901, 0x0194) }, /* GE Healthcare Remote Alarm Box */
{ USB_DEVICE(0x1901, 0x0195) }, /* GE B850/B650/B450 CP2104 DP UART interface */
{ USB_DEVICE(0x1901, 0x0196) }, /* GE B850 CP2105 DP UART interface */
+ { USB_DEVICE(0x1901, 0x0197) }, /* GE CS1000 Display serial interface */
+ { USB_DEVICE(0x1901, 0x0198) }, /* GE CS1000 M.2 Key E serial interface */
{ USB_DEVICE(0x199B, 0xBA30) }, /* LORD WSDA-200-USB */
{ USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
From: Greg Kroah-Hartman <[email protected]>
From: Ian Abbott <[email protected]>
commit ac0bbf55ed3be75fde1f8907e91ecd2fd589bde3 upstream.
The digital input subdevice supports Comedi asynchronous commands that
read interrupt status information. This uses 16-bit Comedi samples (of
which only the bottom 8 bits contain status information). However, the
interrupt handler is calling `comedi_buf_write_samples()` with the
address of a 32-bit variable `unsigned int status`. On a bigendian
machine, this will copy 2 bytes from the wrong end of the variable. Fix
it by changing the type of the variable to `unsigned short`.
Fixes: a8c66b684efa ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions")
Cc: <[email protected]> #4.0+
Signed-off-by: Ian Abbott <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/drivers/addi_apci_1500.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
--- a/drivers/staging/comedi/drivers/addi_apci_1500.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1500.c
@@ -208,7 +208,7 @@ static irqreturn_t apci1500_interrupt(in
struct comedi_device *dev = d;
struct apci1500_private *devpriv = dev->private;
struct comedi_subdevice *s = dev->read_subdev;
- unsigned int status = 0;
+ unsigned short status = 0;
unsigned int val;
val = inl(devpriv->amcc + AMCC_OP_REG_INTCSR);
@@ -238,14 +238,14 @@ static irqreturn_t apci1500_interrupt(in
*
* Mask Meaning
* ---------- ------------------------------------------
- * 0x00000001 Event 1 has occurred
- * 0x00000010 Event 2 has occurred
- * 0x00000100 Counter/timer 1 has run down (not implemented)
- * 0x00001000 Counter/timer 2 has run down (not implemented)
- * 0x00010000 Counter 3 has run down (not implemented)
- * 0x00100000 Watchdog has run down (not implemented)
- * 0x01000000 Voltage error
- * 0x10000000 Short-circuit error
+ * 0b00000001 Event 1 has occurred
+ * 0b00000010 Event 2 has occurred
+ * 0b00000100 Counter/timer 1 has run down (not implemented)
+ * 0b00001000 Counter/timer 2 has run down (not implemented)
+ * 0b00010000 Counter 3 has run down (not implemented)
+ * 0b00100000 Watchdog has run down (not implemented)
+ * 0b01000000 Voltage error
+ * 0b10000000 Short-circuit error
*/
comedi_buf_write_samples(s, &status, 1);
comedi_handle_events(dev, s);
From: Greg Kroah-Hartman <[email protected]>
From: Shuah Khan <[email protected]>
commit 718ad9693e3656120064b715fe931f43a6201e67 upstream.
attach_store() is invoked when user requests import (attach) a device
from usbip host.
Attach and detach are governed by local state and shared state
- Shared state (usbip device status) - Device status is used to manage
the attach and detach operations on import-able devices.
- Local state (tcp_socket, rx and tx thread task_struct ptrs)
A valid tcp_socket controls rx and tx thread operations while the
device is in exported state.
- Device has to be in the right state to be attached and detached.
Attach sequence includes validating the socket and creating receive (rx)
and transmit (tx) threads to talk to the host to get access to the
imported device. rx and tx threads depends on local and shared state to
be correct and in sync.
Detach sequence shuts the socket down and stops the rx and tx threads.
Detach sequence relies on local and shared states to be in sync.
There are races in updating the local and shared status in the current
attach sequence resulting in crashes. These stem from starting rx and
tx threads before local and global state is updated correctly to be in
sync.
1. Doesn't handle kthread_create() error and saves invalid ptr in local
state that drives rx and tx threads.
2. Updates tcp_socket and sockfd, starts stub_rx and stub_tx threads
before updating usbip_device status to VDEV_ST_NOTASSIGNED. This opens
up a race condition between the threads, port connect, and detach
handling.
Fix the above problems:
- Stop using kthread_get_run() macro to create/start threads.
- Create threads and get task struct reference.
- Add kthread_create() failure handling and bail out.
- Hold vhci and usbip_device locks to update local and shared states after
creating rx and tx threads.
- Update usbip_device status to VDEV_ST_NOTASSIGNED.
- Update usbip_device tcp_socket, sockfd, tcp_rx, and tcp_tx
- Start threads after usbip_device (tcp_socket, sockfd, tcp_rx, tcp_tx,
and status) is complete.
Credit goes to syzbot and Tetsuo Handa for finding and root-causing the
kthread_get_run() improper error handling problem and others. This is
hard problem to find and debug since the races aren't seen in a normal
case. Fuzzing forces the race window to be small enough for the
kthread_get_run() error path bug and starting threads before updating the
local and shared state bug in the attach sequence.
- Update usbip_device tcp_rx and tcp_tx pointers holding vhci and
usbip_device locks.
Tested with syzbot reproducer:
- https://syzkaller.appspot.com/text?tag=ReproC&x=14801034d00000
Fixes: 9720b4bc76a83807 ("staging/usbip: convert to kthread")
Cc: [email protected]
Reported-by: syzbot <[email protected]>
Reported-by: syzbot <[email protected]>
Reported-by: syzbot <[email protected]>
Reported-by: Tetsuo Handa <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/bb434bd5d7a64fbec38b5ecfb838a6baef6eb12b.1615171203.git.skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/usbip/vhci_sysfs.c | 29 +++++++++++++++++++++++++----
1 file changed, 25 insertions(+), 4 deletions(-)
--- a/drivers/usb/usbip/vhci_sysfs.c
+++ b/drivers/usb/usbip/vhci_sysfs.c
@@ -312,6 +312,8 @@ static ssize_t attach_store(struct devic
struct vhci *vhci;
int err;
unsigned long flags;
+ struct task_struct *tcp_rx = NULL;
+ struct task_struct *tcp_tx = NULL;
/*
* @rhport: port number of vhci_hcd
@@ -360,9 +362,24 @@ static ssize_t attach_store(struct devic
return -EINVAL;
}
- /* now need lock until setting vdev status as used */
+ /* create threads before locking */
+ tcp_rx = kthread_create(vhci_rx_loop, &vdev->ud, "vhci_rx");
+ if (IS_ERR(tcp_rx)) {
+ sockfd_put(socket);
+ return -EINVAL;
+ }
+ tcp_tx = kthread_create(vhci_tx_loop, &vdev->ud, "vhci_tx");
+ if (IS_ERR(tcp_tx)) {
+ kthread_stop(tcp_rx);
+ sockfd_put(socket);
+ return -EINVAL;
+ }
+
+ /* get task structs now */
+ get_task_struct(tcp_rx);
+ get_task_struct(tcp_tx);
- /* begin a lock */
+ /* now begin lock until setting vdev status set */
spin_lock_irqsave(&vhci->lock, flags);
spin_lock(&vdev->ud.lock);
@@ -372,6 +389,8 @@ static ssize_t attach_store(struct devic
spin_unlock_irqrestore(&vhci->lock, flags);
sockfd_put(socket);
+ kthread_stop_put(tcp_rx);
+ kthread_stop_put(tcp_tx);
dev_err(dev, "port %d already used\n", rhport);
/*
@@ -390,14 +409,16 @@ static ssize_t attach_store(struct devic
vdev->speed = speed;
vdev->ud.sockfd = sockfd;
vdev->ud.tcp_socket = socket;
+ vdev->ud.tcp_rx = tcp_rx;
+ vdev->ud.tcp_tx = tcp_tx;
vdev->ud.status = VDEV_ST_NOTASSIGNED;
spin_unlock(&vdev->ud.lock);
spin_unlock_irqrestore(&vhci->lock, flags);
/* end the lock */
- vdev->ud.tcp_rx = kthread_get_run(vhci_rx_loop, &vdev->ud, "vhci_rx");
- vdev->ud.tcp_tx = kthread_get_run(vhci_tx_loop, &vdev->ud, "vhci_tx");
+ wake_up_process(vdev->ud.tcp_rx);
+ wake_up_process(vdev->ud.tcp_tx);
rh_port_connect(vdev, speed);
From: Greg Kroah-Hartman <[email protected]>
From: Lee Gibson <[email protected]>
commit b93c1e3981af19527beee1c10a2bef67a228c48c upstream.
Function r8712_sitesurvey_cmd calls memcpy without checking the length.
A user could control that length and trigger a buffer overflow.
Fix by checking the length is within the maximum allowed size.
Signed-off-by: Lee Gibson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/rtl8712/rtl871x_cmd.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/staging/rtl8712/rtl871x_cmd.c
+++ b/drivers/staging/rtl8712/rtl871x_cmd.c
@@ -242,8 +242,10 @@ u8 r8712_sitesurvey_cmd(struct _adapter
psurveyPara->ss_ssidlen = 0;
memset(psurveyPara->ss_ssid, 0, IW_ESSID_MAX_SIZE + 1);
if ((pssid != NULL) && (pssid->SsidLength)) {
- memcpy(psurveyPara->ss_ssid, pssid->Ssid, pssid->SsidLength);
- psurveyPara->ss_ssidlen = cpu_to_le32(pssid->SsidLength);
+ int len = min_t(int, pssid->SsidLength, IW_ESSID_MAX_SIZE);
+
+ memcpy(psurveyPara->ss_ssid, pssid->Ssid, len);
+ psurveyPara->ss_ssidlen = cpu_to_le32(len);
}
set_fwstate(pmlmepriv, _FW_UNDER_SURVEY);
r8712_enqueue_cmd(pcmdpriv, ph2c);
From: Greg Kroah-Hartman <[email protected]>
From: Dan Carpenter <[email protected]>
commit d660f4f42ccea50262c6ee90c8e7ad19a69fb225 upstream.
The memdup_user() function does not necessarily return a NUL terminated
string so this can lead to a read overflow. Switch from memdup_user()
to strndup_user() to fix this bug.
Fixes: c6dc001f2add ("staging: r8712u: Merging Realtek's latest (v2.6.6). Various fixes.")
Cc: stable <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/YDYSR+1rj26NRhvb@mwanda
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/rtl8712/rtl871x_ioctl_linux.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
+++ b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
@@ -946,7 +946,7 @@ static int r871x_wx_set_priv(struct net_
struct iw_point *dwrq = (struct iw_point *)awrq;
len = dwrq->length;
- ext = memdup_user(dwrq->pointer, len);
+ ext = strndup_user(dwrq->pointer, len);
if (IS_ERR(ext))
return PTR_ERR(ext);
From: Greg Kroah-Hartman <[email protected]>
From: Ian Abbott <[email protected]>
commit a084303a645896e834883f2c5170d044410dfdb3 upstream.
The analog input subdevice supports Comedi asynchronous commands that
use Comedi's 16-bit sample format. However, the call to
`comedi_buf_write_samples()` is passing the address of a 32-bit integer
variable. On bigendian machines, this will copy 2 bytes from the wrong
end of the 32-bit value. Fix it by changing the type of the variable
holding the sample value to `unsigned short`.
Fixes: 1f44c034de2e ("staging: comedi: pcl711: use comedi_buf_write_samples()")
Cc: <[email protected]> # 3.19+
Signed-off-by: Ian Abbott <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/drivers/pcl711.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/comedi/drivers/pcl711.c
+++ b/drivers/staging/comedi/drivers/pcl711.c
@@ -184,7 +184,7 @@ static irqreturn_t pcl711_interrupt(int
struct comedi_device *dev = d;
struct comedi_subdevice *s = dev->read_subdev;
struct comedi_cmd *cmd = &s->async->cmd;
- unsigned int data;
+ unsigned short data;
if (!dev->attached) {
dev_err(dev->class_dev, "spurious interrupt\n");
From: Greg Kroah-Hartman <[email protected]>
From: Ian Abbott <[email protected]>
commit 54999c0d94b3c26625f896f8e3460bc029821578 upstream.
The analog input subdevice supports Comedi asynchronous commands that
use Comedi's 16-bit sample format. However, the call to
`comedi_buf_write_samples()` is passing the address of a 32-bit integer
variable. On bigendian machines, this will copy 2 bytes from the wrong
end of the 32-bit value. Fix it by changing the type of the variable
holding the sample value to `unsigned short`.
[Note: the bug was introduced in commit 1700529b24cc ("staging: comedi:
dmm32at: use comedi_buf_write_samples()") but the patch applies better
to the later (but in the same kernel release) commit 0c0eadadcbe6e
("staging: comedi: dmm32at: introduce dmm32_ai_get_sample()").]
Fixes: 0c0eadadcbe6e ("staging: comedi: dmm32at: introduce dmm32_ai_get_sample()")
Cc: <[email protected]> # 3.19+
Signed-off-by: Ian Abbott <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/drivers/dmm32at.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/comedi/drivers/dmm32at.c
+++ b/drivers/staging/comedi/drivers/dmm32at.c
@@ -404,7 +404,7 @@ static irqreturn_t dmm32at_isr(int irq,
{
struct comedi_device *dev = d;
unsigned char intstat;
- unsigned int val;
+ unsigned short val;
int i;
if (!dev->attached) {
From: Greg Kroah-Hartman <[email protected]>
From: Shuah Khan <[email protected]>
commit 47ccc8fc2c9c94558b27b6f9e2582df32d29e6e8 upstream.
Fix usbip_sockfd_store() to validate the passed in file descriptor is
a stream socket. If the file descriptor passed was a SOCK_DGRAM socket,
sock_recvmsg() can't detect end of stream.
Cc: [email protected]
Suggested-by: Tetsuo Handa <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/e942d2bd03afb8e8552bd2a5d84e18d17670d521.1615171203.git.skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/usbip/stub_dev.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
--- a/drivers/usb/usbip/stub_dev.c
+++ b/drivers/usb/usbip/stub_dev.c
@@ -69,8 +69,16 @@ static ssize_t usbip_sockfd_store(struct
}
socket = sockfd_lookup(sockfd, &err);
- if (!socket)
+ if (!socket) {
+ dev_err(dev, "failed to lookup sock");
goto err;
+ }
+
+ if (socket->type != SOCK_STREAM) {
+ dev_err(dev, "Expecting SOCK_STREAM - found %d",
+ socket->type);
+ goto sock_err;
+ }
sdev->ud.tcp_socket = socket;
sdev->ud.sockfd = sockfd;
@@ -100,6 +108,8 @@ static ssize_t usbip_sockfd_store(struct
return count;
+sock_err:
+ sockfd_put(socket);
err:
spin_unlock_irq(&sdev->ud.lock);
return -EINVAL;
From: Greg Kroah-Hartman <[email protected]>
From: Arnd Bergmann <[email protected]>
[ Upstream commit cbf78d85079cee662c45749ef4f744d41be85d48 ]
With clang-13, some functions only get partially inlined, with a
specialized version referring to a global variable. This triggers a
harmless build-time check for the intel-rng driver:
WARNING: modpost: drivers/char/hw_random/intel-rng.o(.text+0xe): Section mismatch in reference from the function stop_machine() to the function .init.text:intel_rng_hw_init()
The function stop_machine() references
the function __init intel_rng_hw_init().
This is often because stop_machine lacks a __init
annotation or the annotation of intel_rng_hw_init is wrong.
In this instance, an easy workaround is to force the stop_machine()
function to be inline, along with related interfaces that did not show the
same behavior at the moment, but theoretically could.
The combination of the two patches listed below triggers the behavior in
clang-13, but individually these commits are correct.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: fe5595c07400 ("stop_machine: Provide stop_machine_cpuslocked()")
Fixes: ee527cd3a20c ("Use stop_machine_run in the Intel RNG driver")
Signed-off-by: Arnd Bergmann <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Sebastian Andrzej Siewior <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Prarit Bhargava <[email protected]>
Cc: Daniel Bristot de Oliveira <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Valentin Schneider <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/stop_machine.h | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/include/linux/stop_machine.h b/include/linux/stop_machine.h
index 6d3635c86dbe..ccdaa8fd5657 100644
--- a/include/linux/stop_machine.h
+++ b/include/linux/stop_machine.h
@@ -138,7 +138,7 @@ int stop_machine_from_inactive_cpu(cpu_stop_fn_t fn, void *data,
const struct cpumask *cpus);
#else /* CONFIG_SMP || CONFIG_HOTPLUG_CPU */
-static inline int stop_machine_cpuslocked(cpu_stop_fn_t fn, void *data,
+static __always_inline int stop_machine_cpuslocked(cpu_stop_fn_t fn, void *data,
const struct cpumask *cpus)
{
unsigned long flags;
@@ -149,14 +149,15 @@ static inline int stop_machine_cpuslocked(cpu_stop_fn_t fn, void *data,
return ret;
}
-static inline int stop_machine(cpu_stop_fn_t fn, void *data,
- const struct cpumask *cpus)
+static __always_inline int
+stop_machine(cpu_stop_fn_t fn, void *data, const struct cpumask *cpus)
{
return stop_machine_cpuslocked(fn, data, cpus);
}
-static inline int stop_machine_from_inactive_cpu(cpu_stop_fn_t fn, void *data,
- const struct cpumask *cpus)
+static __always_inline int
+stop_machine_from_inactive_cpu(cpu_stop_fn_t fn, void *data,
+ const struct cpumask *cpus)
{
return stop_machine(fn, data, cpus);
}
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Karan Singhal <[email protected]>
commit ca667a33207daeaf9c62b106815728718def60ec upstream.
IDs of nLight Air Adapter, Acuity Brands, Inc.:
vid: 10c4
pid: 88d8
Signed-off-by: Karan Singhal <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/cp210x.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -146,6 +146,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(0x10C4, 0x8857) }, /* CEL EM357 ZigBee USB Stick */
{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
+ { USB_DEVICE(0x10C4, 0x88D8) }, /* Acuity Brands nLight Air Adapter */
{ USB_DEVICE(0x10C4, 0x88FB) }, /* CESINEL MEDCAL STII Network Analyzer */
{ USB_DEVICE(0x10C4, 0x8938) }, /* CESINEL MEDCAL S II Network Analyzer */
{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
From: Greg Kroah-Hartman <[email protected]>
From: Ian Abbott <[email protected]>
commit b39dfcced399d31e7c4b7341693b18e01c8f655e upstream.
The analog input subdevice supports Comedi asynchronous commands that
use Comedi's 16-bit sample format. However, the calls to
`comedi_buf_write_samples()` are passing the address of a 32-bit integer
variable. On bigendian machines, this will copy 2 bytes from the wrong
end of the 32-bit value. Fix it by changing the type of the variable
holding the sample value to `unsigned short`.
Fixes: de88924f67d1 ("staging: comedi: me4000: use comedi_buf_write_samples()")
Cc: <[email protected]> # 3.19+
Signed-off-by: Ian Abbott <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/drivers/me4000.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/comedi/drivers/me4000.c
+++ b/drivers/staging/comedi/drivers/me4000.c
@@ -924,7 +924,7 @@ static irqreturn_t me4000_ai_isr(int irq
struct comedi_subdevice *s = dev->read_subdev;
int i;
int c = 0;
- unsigned int lval;
+ unsigned short lval;
if (!dev->attached)
return IRQ_NONE;
From: Greg Kroah-Hartman <[email protected]>
From: Shuah Khan <[email protected]>
commit 9380afd6df70e24eacbdbde33afc6a3950965d22 upstream.
usbip_sockfd_store() is invoked when user requests attach (import)
detach (unimport) usb device from usbip host. vhci_hcd sends import
request and usbip_sockfd_store() exports the device if it is free
for export.
Export and unexport are governed by local state and shared state
- Shared state (usbip device status, sockfd) - sockfd and Device
status are used to determine if stub should be brought up or shut
down.
- Local state (tcp_socket, rx and tx thread task_struct ptrs)
A valid tcp_socket controls rx and tx thread operations while the
device is in exported state.
- While the device is exported, device status is marked used and socket,
sockfd, and thread pointers are valid.
Export sequence (stub-up) includes validating the socket and creating
receive (rx) and transmit (tx) threads to talk to the client to provide
access to the exported device. rx and tx threads depends on local and
shared state to be correct and in sync.
Unexport (stub-down) sequence shuts the socket down and stops the rx and
tx threads. Stub-down sequence relies on local and shared states to be
in sync.
There are races in updating the local and shared status in the current
stub-up sequence resulting in crashes. These stem from starting rx and
tx threads before local and global state is updated correctly to be in
sync.
1. Doesn't handle kthread_create() error and saves invalid ptr in local
state that drives rx and tx threads.
2. Updates tcp_socket and sockfd, starts stub_rx and stub_tx threads
before updating usbip_device status to SDEV_ST_USED. This opens up a
race condition between the threads and usbip_sockfd_store() stub up
and down handling.
Fix the above problems:
- Stop using kthread_get_run() macro to create/start threads.
- Create threads and get task struct reference.
- Add kthread_create() failure handling and bail out.
- Hold usbip_device lock to update local and shared states after
creating rx and tx threads.
- Update usbip_device status to SDEV_ST_USED.
- Update usbip_device tcp_socket, sockfd, tcp_rx, and tcp_tx
- Start threads after usbip_device (tcp_socket, sockfd, tcp_rx, tcp_tx,
and status) is complete.
Credit goes to syzbot and Tetsuo Handa for finding and root-causing the
kthread_get_run() improper error handling problem and others. This is a
hard problem to find and debug since the races aren't seen in a normal
case. Fuzzing forces the race window to be small enough for the
kthread_get_run() error path bug and starting threads before updating the
local and shared state bug in the stub-up sequence.
Tested with syzbot reproducer:
- https://syzkaller.appspot.com/text?tag=ReproC&x=14801034d00000
Fixes: 9720b4bc76a83807 ("staging/usbip: convert to kthread")
Cc: [email protected]
Reported-by: syzbot <[email protected]>
Reported-by: syzbot <[email protected]>
Reported-by: syzbot <[email protected]>
Reported-by: Tetsuo Handa <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/268a0668144d5ff36ec7d87fdfa90faf583b7ccc.1615171203.git.skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/usbip/stub_dev.c | 32 +++++++++++++++++++++++++-------
1 file changed, 25 insertions(+), 7 deletions(-)
--- a/drivers/usb/usbip/stub_dev.c
+++ b/drivers/usb/usbip/stub_dev.c
@@ -46,6 +46,8 @@ static ssize_t usbip_sockfd_store(struct
int sockfd = 0;
struct socket *socket;
int rv;
+ struct task_struct *tcp_rx = NULL;
+ struct task_struct *tcp_tx = NULL;
if (!sdev) {
dev_err(dev, "sdev is null\n");
@@ -80,20 +82,36 @@ static ssize_t usbip_sockfd_store(struct
goto sock_err;
}
- sdev->ud.tcp_socket = socket;
- sdev->ud.sockfd = sockfd;
-
+ /* unlock and create threads and get tasks */
spin_unlock_irq(&sdev->ud.lock);
+ tcp_rx = kthread_create(stub_rx_loop, &sdev->ud, "stub_rx");
+ if (IS_ERR(tcp_rx)) {
+ sockfd_put(socket);
+ return -EINVAL;
+ }
+ tcp_tx = kthread_create(stub_tx_loop, &sdev->ud, "stub_tx");
+ if (IS_ERR(tcp_tx)) {
+ kthread_stop(tcp_rx);
+ sockfd_put(socket);
+ return -EINVAL;
+ }
- sdev->ud.tcp_rx = kthread_get_run(stub_rx_loop, &sdev->ud,
- "stub_rx");
- sdev->ud.tcp_tx = kthread_get_run(stub_tx_loop, &sdev->ud,
- "stub_tx");
+ /* get task structs now */
+ get_task_struct(tcp_rx);
+ get_task_struct(tcp_tx);
+ /* lock and update sdev->ud state */
spin_lock_irq(&sdev->ud.lock);
+ sdev->ud.tcp_socket = socket;
+ sdev->ud.sockfd = sockfd;
+ sdev->ud.tcp_rx = tcp_rx;
+ sdev->ud.tcp_tx = tcp_tx;
sdev->ud.status = SDEV_ST_USED;
spin_unlock_irq(&sdev->ud.lock);
+ wake_up_process(sdev->ud.tcp_rx);
+ wake_up_process(sdev->ud.tcp_tx);
+
} else {
dev_info(dev, "stub down\n");
From: Greg Kroah-Hartman <[email protected]>
From: Kevin(Yudong) Yang <[email protected]>
commit 00ff801bb8ce6711e919af4530b6ffa14a22390a upstream.
This patch fixes a bug that the moderation config will not be
applied when calling mlx4_en_reset_config. For example, when
turning on rx timestamping, mlx4_en_reset_config() will be called,
causing the NIC to forget previous moderation config.
This fix is in phase with a previous fix:
commit 79c54b6bbf06 ("net/mlx4_en: Fix TX moderation info loss
after set_ringparam is called")
Tested: Before this patch, on a host with NIC using mlx4, run
netserver and stream TCP to the host at full utilization.
$ sar -I SUM 1
INTR intr/s
14:03:56 sum 48758.00
After rx hwtstamp is enabled:
$ sar -I SUM 1
14:10:38 sum 317771.00
We see the moderation is not working properly and issued 7x more
interrupts.
After the patch, and turned on rx hwtstamp, the rate of interrupts
is as expected:
$ sar -I SUM 1
14:52:11 sum 49332.00
Fixes: 79c54b6bbf06 ("net/mlx4_en: Fix TX moderation info loss after set_ringparam is called")
Signed-off-by: Kevin(Yudong) Yang <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: Neal Cardwell <[email protected]>
CC: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 2 +-
drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 2 ++
drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 +
3 files changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -47,7 +47,7 @@
#define EN_ETHTOOL_SHORT_MASK cpu_to_be16(0xffff)
#define EN_ETHTOOL_WORD_MASK cpu_to_be32(0xffffffff)
-static int mlx4_en_moderation_update(struct mlx4_en_priv *priv)
+int mlx4_en_moderation_update(struct mlx4_en_priv *priv)
{
int i, t;
int err = 0;
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -3667,6 +3667,8 @@ int mlx4_en_reset_config(struct net_devi
en_err(priv, "Failed starting port\n");
}
+ if (!err)
+ err = mlx4_en_moderation_update(priv);
out:
mutex_unlock(&mdev->state_lock);
kfree(tmp);
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -798,6 +798,7 @@ void mlx4_en_ptp_overflow_check(struct m
#define DEV_FEATURE_CHANGED(dev, new_features, feature) \
((dev->features & feature) ^ (new_features & feature))
+int mlx4_en_moderation_update(struct mlx4_en_priv *priv);
int mlx4_en_reset_config(struct net_device *dev,
struct hwtstamp_config ts_config,
netdev_features_t new_features);
From: Greg Kroah-Hartman <[email protected]>
From: Alexey Dobriyan <[email protected]>
[ Upstream commit c995f12ad8842dbf5cfed113fb52cdd083f5afd1 ]
Doing a
prctl(PR_SET_MM, PR_SET_MM_AUXV, addr, 1);
will copy 1 byte from userspace to (quite big) on-stack array
and then stash everything to mm->saved_auxv.
AT_NULL terminator will be inserted at the very end.
/proc/*/auxv handler will find that AT_NULL terminator
and copy original stack contents to userspace.
This devious scheme requires CAP_SYS_RESOURCE.
Signed-off-by: Alexey Dobriyan <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sys.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/sys.c b/kernel/sys.c
index baf60a3aa34b..81ed6023d01b 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -2069,7 +2069,7 @@ static int prctl_set_auxv(struct mm_struct *mm, unsigned long addr,
* up to the caller to provide sane values here, otherwise userspace
* tools which use this vector might be unhappy.
*/
- unsigned long user_auxv[AT_VECTOR_SIZE];
+ unsigned long user_auxv[AT_VECTOR_SIZE] = {};
if (len > sizeof(user_auxv))
return -EINVAL;
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Ian Abbott <[email protected]>
commit b2e78630f733a76508b53ba680528ca39c890e82 upstream.
The analog input subdevice supports Comedi asynchronous commands that
use Comedi's 16-bit sample format. However, the calls to
`comedi_buf_write_samples()` are passing the address of a 32-bit integer
variable. On bigendian machines, this will copy 2 bytes from the wrong
end of the 32-bit value. Fix it by changing the type of the variables
holding the sample value to `unsigned short`. The type of the `val`
parameter of `pci1710_ai_read_sample()` is changed to `unsigned short *`
accordingly. The type of the `val` variable in `pci1710_ai_insn_read()`
is also changed to `unsigned short` since its address is passed to
`pci1710_ai_read_sample()`.
Fixes: a9c3a015c12f ("staging: comedi: adv_pci1710: use comedi_buf_write_samples()")
Cc: <[email protected]> # 4.0+
Signed-off-by: Ian Abbott <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/drivers/adv_pci1710.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/staging/comedi/drivers/adv_pci1710.c
+++ b/drivers/staging/comedi/drivers/adv_pci1710.c
@@ -300,11 +300,11 @@ static int pci1710_ai_eoc(struct comedi_
static int pci1710_ai_read_sample(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int cur_chan,
- unsigned int *val)
+ unsigned short *val)
{
const struct boardtype *board = dev->board_ptr;
struct pci1710_private *devpriv = dev->private;
- unsigned int sample;
+ unsigned short sample;
unsigned int chan;
sample = inw(dev->iobase + PCI171X_AD_DATA_REG);
@@ -345,7 +345,7 @@ static int pci1710_ai_insn_read(struct c
pci1710_ai_setup_chanlist(dev, s, &insn->chanspec, 1, 1);
for (i = 0; i < insn->n; i++) {
- unsigned int val;
+ unsigned short val;
/* start conversion */
outw(0, dev->iobase + PCI171X_SOFTTRG_REG);
@@ -395,7 +395,7 @@ static void pci1710_handle_every_sample(
{
struct comedi_cmd *cmd = &s->async->cmd;
unsigned int status;
- unsigned int val;
+ unsigned short val;
int ret;
status = inw(dev->iobase + PCI171X_STATUS_REG);
@@ -455,7 +455,7 @@ static void pci1710_handle_fifo(struct c
}
for (i = 0; i < devpriv->max_samples; i++) {
- unsigned int val;
+ unsigned short val;
int ret;
ret = pci1710_ai_read_sample(dev, s, s->async->cur_chan, &val);
From: Greg Kroah-Hartman <[email protected]>
From: Ian Abbott <[email protected]>
commit 459b1e8c8fe97fcba0bd1b623471713dce2c5eaf upstream.
The analog input subdevice supports Comedi asynchronous commands that
use Comedi's 16-bit sample format. However, the call to
`comedi_buf_write_samples()` is passing the address of a 32-bit integer
variable. On bigendian machines, this will copy 2 bytes from the wrong
end of the 32-bit value. Fix it by changing the type of the variable
holding the sample value to `unsigned short`.
Fixes: ad9eb43c93d8 ("staging: comedi: das800: use comedi_buf_write_samples()")
Cc: <[email protected]> # 3.19+
Signed-off-by: Ian Abbott <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/drivers/das800.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/comedi/drivers/das800.c
+++ b/drivers/staging/comedi/drivers/das800.c
@@ -427,7 +427,7 @@ static irqreturn_t das800_interrupt(int
struct comedi_cmd *cmd;
unsigned long irq_flags;
unsigned int status;
- unsigned int val;
+ unsigned short val;
bool fifo_empty;
bool fifo_overflow;
int i;
From: Greg Kroah-Hartman <[email protected]>
From: Matthew Wilcox (Oracle) <[email protected]>
[ Upstream commit 149fc787353f65b7e72e05e7b75d34863266c3e2 ]
Fix a sparse warning by using rcu_dereference(). Technically this is a
bug and a sufficiently aggressive compiler could reload the `real_parent'
pointer outside the protection of the rcu lock (and access freed memory),
but I think it's pretty unlikely to happen.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: b18dc5f291c0 ("mm, oom: skip vforked tasks from being selected")
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Reviewed-by: Miaohe Lin <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/sched/mm.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h
index 8d3b7e731b74..ef54f4b3f1e4 100644
--- a/include/linux/sched/mm.h
+++ b/include/linux/sched/mm.h
@@ -167,7 +167,8 @@ static inline bool in_vfork(struct task_struct *tsk)
* another oom-unkillable task does this it should blame itself.
*/
rcu_read_lock();
- ret = tsk->vfork_done && tsk->real_parent->mm == tsk->mm;
+ ret = tsk->vfork_done &&
+ rcu_dereference(tsk->real_parent)->mm == tsk->mm;
rcu_read_unlock();
return ret;
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Juergen Gross <[email protected]>
commit 25da4618af240fbec6112401498301a6f2bc9702 upstream.
An event channel should be kept masked when an eoi is pending for it.
When being migrated to another cpu it might be unmasked, though.
In order to avoid this keep three different flags for each event channel
to be able to distinguish "normal" masking/unmasking from eoi related
masking/unmasking and temporary masking. The event channel should only
be able to generate an interrupt if all flags are cleared.
Cc: [email protected]
Fixes: 54c9de89895e ("xen/events: add a new "late EOI" evtchn framework")
Reported-by: Julien Grall <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Julien Grall <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Tested-by: Ross Lagerwall <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[boris -- corrected Fixed tag format]
Signed-off-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/xen/events/events_2l.c | 7 --
drivers/xen/events/events_base.c | 110 ++++++++++++++++++++++++++---------
drivers/xen/events/events_fifo.c | 7 --
drivers/xen/events/events_internal.h | 13 +---
4 files changed, 88 insertions(+), 49 deletions(-)
--- a/drivers/xen/events/events_2l.c
+++ b/drivers/xen/events/events_2l.c
@@ -76,12 +76,6 @@ static bool evtchn_2l_is_pending(unsigne
return sync_test_bit(port, BM(&s->evtchn_pending[0]));
}
-static bool evtchn_2l_test_and_set_mask(unsigned port)
-{
- struct shared_info *s = HYPERVISOR_shared_info;
- return sync_test_and_set_bit(port, BM(&s->evtchn_mask[0]));
-}
-
static void evtchn_2l_mask(unsigned port)
{
struct shared_info *s = HYPERVISOR_shared_info;
@@ -375,7 +369,6 @@ static const struct evtchn_ops evtchn_op
.clear_pending = evtchn_2l_clear_pending,
.set_pending = evtchn_2l_set_pending,
.is_pending = evtchn_2l_is_pending,
- .test_and_set_mask = evtchn_2l_test_and_set_mask,
.mask = evtchn_2l_mask,
.unmask = evtchn_2l_unmask,
.handle_events = evtchn_2l_handle_events,
--- a/drivers/xen/events/events_base.c
+++ b/drivers/xen/events/events_base.c
@@ -98,6 +98,7 @@ static DEFINE_RWLOCK(evtchn_rwlock);
* evtchn_rwlock
* IRQ-desc lock
* percpu eoi_list_lock
+ * irq_info->lock
*/
static LIST_HEAD(xen_irq_list_head);
@@ -219,6 +220,8 @@ static int xen_irq_info_common_setup(str
info->irq = irq;
info->evtchn = evtchn;
info->cpu = cpu;
+ info->mask_reason = EVT_MASK_REASON_EXPLICIT;
+ spin_lock_init(&info->lock);
ret = set_evtchn_to_irq(evtchn, irq);
if (ret < 0)
@@ -366,6 +369,34 @@ unsigned int cpu_from_evtchn(unsigned in
return ret;
}
+static void do_mask(struct irq_info *info, u8 reason)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->lock, flags);
+
+ if (!info->mask_reason)
+ mask_evtchn(info->evtchn);
+
+ info->mask_reason |= reason;
+
+ spin_unlock_irqrestore(&info->lock, flags);
+}
+
+static void do_unmask(struct irq_info *info, u8 reason)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->lock, flags);
+
+ info->mask_reason &= ~reason;
+
+ if (!info->mask_reason)
+ unmask_evtchn(info->evtchn);
+
+ spin_unlock_irqrestore(&info->lock, flags);
+}
+
#ifdef CONFIG_X86
static bool pirq_check_eoi_map(unsigned irq)
{
@@ -493,7 +524,7 @@ static void xen_irq_lateeoi_locked(struc
}
info->eoi_time = 0;
- unmask_evtchn(evtchn);
+ do_unmask(info, EVT_MASK_REASON_EOI_PENDING);
}
static void xen_irq_lateeoi_worker(struct work_struct *work)
@@ -680,7 +711,8 @@ static void pirq_query_unmask(int irq)
static void eoi_pirq(struct irq_data *data)
{
- int evtchn = evtchn_from_irq(data->irq);
+ struct irq_info *info = info_for_irq(data->irq);
+ int evtchn = info ? info->evtchn : 0;
struct physdev_eoi eoi = { .irq = pirq_from_irq(data->irq) };
int rc = 0;
@@ -689,14 +721,13 @@ static void eoi_pirq(struct irq_data *da
if (unlikely(irqd_is_setaffinity_pending(data)) &&
likely(!irqd_irq_disabled(data))) {
- int masked = test_and_set_mask(evtchn);
+ do_mask(info, EVT_MASK_REASON_TEMPORARY);
clear_evtchn(evtchn);
irq_move_masked_irq(data);
- if (!masked)
- unmask_evtchn(evtchn);
+ do_unmask(info, EVT_MASK_REASON_TEMPORARY);
} else
clear_evtchn(evtchn);
@@ -749,7 +780,8 @@ static unsigned int __startup_pirq(unsig
goto err;
out:
- unmask_evtchn(evtchn);
+ do_unmask(info, EVT_MASK_REASON_EXPLICIT);
+
eoi_pirq(irq_get_irq_data(irq));
return 0;
@@ -776,7 +808,7 @@ static void shutdown_pirq(struct irq_dat
if (!VALID_EVTCHN(evtchn))
return;
- mask_evtchn(evtchn);
+ do_mask(info, EVT_MASK_REASON_EXPLICIT);
xen_evtchn_close(evtchn);
xen_irq_info_cleanup(info);
}
@@ -1635,10 +1667,10 @@ void rebind_evtchn_irq(int evtchn, int i
}
/* Rebind an evtchn so that it gets delivered to a specific cpu */
-static int xen_rebind_evtchn_to_cpu(int evtchn, unsigned int tcpu)
+static int xen_rebind_evtchn_to_cpu(struct irq_info *info, unsigned int tcpu)
{
struct evtchn_bind_vcpu bind_vcpu;
- int masked;
+ evtchn_port_t evtchn = info ? info->evtchn : 0;
if (!VALID_EVTCHN(evtchn))
return -1;
@@ -1654,7 +1686,7 @@ static int xen_rebind_evtchn_to_cpu(int
* Mask the event while changing the VCPU binding to prevent
* it being delivered on an unexpected VCPU.
*/
- masked = test_and_set_mask(evtchn);
+ do_mask(info, EVT_MASK_REASON_TEMPORARY);
/*
* If this fails, it usually just indicates that we're dealing with a
@@ -1664,8 +1696,7 @@ static int xen_rebind_evtchn_to_cpu(int
if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_vcpu, &bind_vcpu) >= 0)
bind_evtchn_to_cpu(evtchn, tcpu);
- if (!masked)
- unmask_evtchn(evtchn);
+ do_unmask(info, EVT_MASK_REASON_TEMPORARY);
return 0;
}
@@ -1674,7 +1705,7 @@ static int set_affinity_irq(struct irq_d
bool force)
{
unsigned tcpu = cpumask_first_and(dest, cpu_online_mask);
- int ret = xen_rebind_evtchn_to_cpu(evtchn_from_irq(data->irq), tcpu);
+ int ret = xen_rebind_evtchn_to_cpu(info_for_irq(data->irq), tcpu);
if (!ret)
irq_data_update_effective_affinity(data, cpumask_of(tcpu));
@@ -1693,37 +1724,39 @@ EXPORT_SYMBOL_GPL(xen_set_affinity_evtch
static void enable_dynirq(struct irq_data *data)
{
- int evtchn = evtchn_from_irq(data->irq);
+ struct irq_info *info = info_for_irq(data->irq);
+ evtchn_port_t evtchn = info ? info->evtchn : 0;
if (VALID_EVTCHN(evtchn))
- unmask_evtchn(evtchn);
+ do_unmask(info, EVT_MASK_REASON_EXPLICIT);
}
static void disable_dynirq(struct irq_data *data)
{
- int evtchn = evtchn_from_irq(data->irq);
+ struct irq_info *info = info_for_irq(data->irq);
+ evtchn_port_t evtchn = info ? info->evtchn : 0;
if (VALID_EVTCHN(evtchn))
- mask_evtchn(evtchn);
+ do_mask(info, EVT_MASK_REASON_EXPLICIT);
}
static void ack_dynirq(struct irq_data *data)
{
- int evtchn = evtchn_from_irq(data->irq);
+ struct irq_info *info = info_for_irq(data->irq);
+ evtchn_port_t evtchn = info ? info->evtchn : 0;
if (!VALID_EVTCHN(evtchn))
return;
if (unlikely(irqd_is_setaffinity_pending(data)) &&
likely(!irqd_irq_disabled(data))) {
- int masked = test_and_set_mask(evtchn);
+ do_mask(info, EVT_MASK_REASON_TEMPORARY);
clear_evtchn(evtchn);
irq_move_masked_irq(data);
- if (!masked)
- unmask_evtchn(evtchn);
+ do_unmask(info, EVT_MASK_REASON_TEMPORARY);
} else
clear_evtchn(evtchn);
}
@@ -1734,18 +1767,39 @@ static void mask_ack_dynirq(struct irq_d
ack_dynirq(data);
}
+static void lateeoi_ack_dynirq(struct irq_data *data)
+{
+ struct irq_info *info = info_for_irq(data->irq);
+ evtchn_port_t evtchn = info ? info->evtchn : 0;
+
+ if (VALID_EVTCHN(evtchn)) {
+ do_mask(info, EVT_MASK_REASON_EOI_PENDING);
+ clear_evtchn(evtchn);
+ }
+}
+
+static void lateeoi_mask_ack_dynirq(struct irq_data *data)
+{
+ struct irq_info *info = info_for_irq(data->irq);
+ evtchn_port_t evtchn = info ? info->evtchn : 0;
+
+ if (VALID_EVTCHN(evtchn)) {
+ do_mask(info, EVT_MASK_REASON_EXPLICIT);
+ clear_evtchn(evtchn);
+ }
+}
+
static int retrigger_dynirq(struct irq_data *data)
{
- unsigned int evtchn = evtchn_from_irq(data->irq);
- int masked;
+ struct irq_info *info = info_for_irq(data->irq);
+ evtchn_port_t evtchn = info ? info->evtchn : 0;
if (!VALID_EVTCHN(evtchn))
return 0;
- masked = test_and_set_mask(evtchn);
+ do_mask(info, EVT_MASK_REASON_TEMPORARY);
set_evtchn(evtchn);
- if (!masked)
- unmask_evtchn(evtchn);
+ do_unmask(info, EVT_MASK_REASON_TEMPORARY);
return 1;
}
@@ -1951,8 +2005,8 @@ static struct irq_chip xen_lateeoi_chip
.irq_mask = disable_dynirq,
.irq_unmask = enable_dynirq,
- .irq_ack = mask_ack_dynirq,
- .irq_mask_ack = mask_ack_dynirq,
+ .irq_ack = lateeoi_ack_dynirq,
+ .irq_mask_ack = lateeoi_mask_ack_dynirq,
.irq_set_affinity = set_affinity_irq,
.irq_retrigger = retrigger_dynirq,
--- a/drivers/xen/events/events_fifo.c
+++ b/drivers/xen/events/events_fifo.c
@@ -209,12 +209,6 @@ static bool evtchn_fifo_is_pending(unsig
return sync_test_bit(EVTCHN_FIFO_BIT(PENDING, word), BM(word));
}
-static bool evtchn_fifo_test_and_set_mask(unsigned port)
-{
- event_word_t *word = event_word_from_port(port);
- return sync_test_and_set_bit(EVTCHN_FIFO_BIT(MASKED, word), BM(word));
-}
-
static void evtchn_fifo_mask(unsigned port)
{
event_word_t *word = event_word_from_port(port);
@@ -420,7 +414,6 @@ static const struct evtchn_ops evtchn_op
.clear_pending = evtchn_fifo_clear_pending,
.set_pending = evtchn_fifo_set_pending,
.is_pending = evtchn_fifo_is_pending,
- .test_and_set_mask = evtchn_fifo_test_and_set_mask,
.mask = evtchn_fifo_mask,
.unmask = evtchn_fifo_unmask,
.handle_events = evtchn_fifo_handle_events,
--- a/drivers/xen/events/events_internal.h
+++ b/drivers/xen/events/events_internal.h
@@ -35,13 +35,18 @@ struct irq_info {
struct list_head eoi_list;
short refcnt;
short spurious_cnt;
- enum xen_irq_type type; /* type */
+ short type; /* type */
+ u8 mask_reason; /* Why is event channel masked */
+#define EVT_MASK_REASON_EXPLICIT 0x01
+#define EVT_MASK_REASON_TEMPORARY 0x02
+#define EVT_MASK_REASON_EOI_PENDING 0x04
unsigned irq;
unsigned int evtchn; /* event channel */
unsigned short cpu; /* cpu bound */
unsigned short eoi_cpu; /* EOI must happen on this cpu */
unsigned int irq_epoch; /* If eoi_cpu valid: irq_epoch of event */
u64 eoi_time; /* Time in jiffies when to EOI. */
+ spinlock_t lock;
union {
unsigned short virq;
@@ -73,7 +78,6 @@ struct evtchn_ops {
void (*clear_pending)(unsigned port);
void (*set_pending)(unsigned port);
bool (*is_pending)(unsigned port);
- bool (*test_and_set_mask)(unsigned port);
void (*mask)(unsigned port);
void (*unmask)(unsigned port);
@@ -138,11 +142,6 @@ static inline bool test_evtchn(unsigned
return evtchn_ops->is_pending(port);
}
-static inline bool test_and_set_mask(unsigned port)
-{
- return evtchn_ops->test_and_set_mask(port);
-}
-
static inline void mask_evtchn(unsigned port)
{
return evtchn_ops->mask(port);
From: Greg Kroah-Hartman <[email protected]>
From: Lee Gibson <[email protected]>
commit 8687bf9ef9551bcf93897e33364d121667b1aadf upstream.
Function _rtl92e_wx_set_scan calls memcpy without checking the length.
A user could control that length and trigger a buffer overflow.
Fix by checking the length is within the maximum allowed size.
Reviewed-by: Dan Carpenter <[email protected]>
Signed-off-by: Lee Gibson <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/rtl8192e/rtl8192e/rtl_wx.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_wx.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_wx.c
@@ -415,9 +415,10 @@ static int _rtl92e_wx_set_scan(struct ne
struct iw_scan_req *req = (struct iw_scan_req *)b;
if (req->essid_len) {
- ieee->current_network.ssid_len = req->essid_len;
- memcpy(ieee->current_network.ssid, req->essid,
- req->essid_len);
+ int len = min_t(int, req->essid_len, IW_ESSID_MAX_SIZE);
+
+ ieee->current_network.ssid_len = len;
+ memcpy(ieee->current_network.ssid, req->essid, len);
}
}
From: Greg Kroah-Hartman <[email protected]>
From: Naveen N. Rao <[email protected]>
commit cea15316ceee2d4a51dfdecd79e08a438135416c upstream.
'lis r2,N' is 'addis r2,0,N' and the instruction encoding in the macro
LIS_R2 is incorrect (it currently maps to 'addis r0,r2,N'). Fix the
same.
Fixes: c71b7eff426f ("powerpc: Add ABIv2 support to ppc_function_entry")
Cc: [email protected] # v3.16+
Reported-by: Jiri Olsa <[email protected]>
Signed-off-by: Naveen N. Rao <[email protected]>
Acked-by: Segher Boessenkool <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/code-patching.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/include/asm/code-patching.h
+++ b/arch/powerpc/include/asm/code-patching.h
@@ -52,7 +52,7 @@ void __patch_exception(int exc, unsigned
#endif
#define OP_RT_RA_MASK 0xffff0000UL
-#define LIS_R2 0x3c020000UL
+#define LIS_R2 0x3c400000UL
#define ADDIS_R2_R12 0x3c4c0000UL
#define ADDI_R2_R2 0x38420000UL
From: Greg Kroah-Hartman <[email protected]>
From: Shuah Khan <[email protected]>
commit 6801854be94fe8819b3894979875ea31482f5658 upstream.
Fix usbip_sockfd_store() to validate the passed in file descriptor is
a stream socket. If the file descriptor passed was a SOCK_DGRAM socket,
sock_recvmsg() can't detect end of stream.
Cc: [email protected]
Suggested-by: Tetsuo Handa <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/387a670316002324113ac7ea1e8b53f4085d0c95.1615171203.git.skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/usbip/vudc_sysfs.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/usb/usbip/vudc_sysfs.c
+++ b/drivers/usb/usbip/vudc_sysfs.c
@@ -12,6 +12,7 @@
#include <linux/usb/ch9.h>
#include <linux/sysfs.h>
#include <linux/kthread.h>
+#include <linux/file.h>
#include <linux/byteorder/generic.h>
#include "usbip_common.h"
@@ -138,6 +139,13 @@ static ssize_t usbip_sockfd_store(struct
goto unlock_ud;
}
+ if (socket->type != SOCK_STREAM) {
+ dev_err(dev, "Expecting SOCK_STREAM - found %d",
+ socket->type);
+ ret = -EINVAL;
+ goto sock_err;
+ }
+
udc->ud.tcp_socket = socket;
spin_unlock_irq(&udc->ud.lock);
@@ -177,6 +185,8 @@ static ssize_t usbip_sockfd_store(struct
return count;
+sock_err:
+ sockfd_put(socket);
unlock_ud:
spin_unlock_irq(&udc->ud.lock);
unlock:
From: Greg Kroah-Hartman <[email protected]>
From: Boyang Yu <[email protected]>
commit 62456189f3292c62f87aef363f204886dc1d4b48 upstream.
max6658 may report unrealistically high temperature during
the driver initialization, for which, its overtemp alarm pin
also gets asserted. For certain devices implementing overtemp
protection based on that pin, it may further trigger a reset to
the device. By reproducing the problem, the wrong reading is
found to be coincident with changing the conversion rate.
To mitigate this issue, set the stop bit before changing the
conversion rate and unset it thereafter. After such change, the
wrong reading is not reproduced. Apply this change only to the
max6657 kind for now, controlled by flag LM90_PAUSE_ON_CONFIG.
Signed-off-by: Boyang Yu <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Cc: Paul Menzel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/lm90.c | 42 ++++++++++++++++++++++++++++++++++++++----
1 file changed, 38 insertions(+), 4 deletions(-)
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -187,6 +187,7 @@ enum chips { lm90, adm1032, lm99, lm86,
#define LM90_HAVE_EMERGENCY_ALARM (1 << 5)/* emergency alarm */
#define LM90_HAVE_TEMP3 (1 << 6) /* 3rd temperature sensor */
#define LM90_HAVE_BROKEN_ALERT (1 << 7) /* Broken alert */
+#define LM90_PAUSE_FOR_CONFIG (1 << 8) /* Pause conversion for config */
/* LM90 status */
#define LM90_STATUS_LTHRM (1 << 0) /* local THERM limit tripped */
@@ -380,6 +381,7 @@ static const struct lm90_params lm90_par
.reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
},
[max6657] = {
+ .flags = LM90_PAUSE_FOR_CONFIG,
.alert_alarms = 0x7c,
.max_convrate = 8,
.reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
@@ -580,6 +582,38 @@ static inline int lm90_select_remote_cha
return 0;
}
+static int lm90_write_convrate(struct i2c_client *client,
+ struct lm90_data *data, int val)
+{
+ int err;
+ int config_orig, config_stop;
+
+ /* Save config and pause conversion */
+ if (data->flags & LM90_PAUSE_FOR_CONFIG) {
+ config_orig = lm90_read_reg(client, LM90_REG_R_CONFIG1);
+ if (config_orig < 0)
+ return config_orig;
+ config_stop = config_orig | 0x40;
+ if (config_orig != config_stop) {
+ err = i2c_smbus_write_byte_data(client,
+ LM90_REG_W_CONFIG1,
+ config_stop);
+ if (err < 0)
+ return err;
+ }
+ }
+
+ /* Set conv rate */
+ err = i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE, val);
+
+ /* Revert change to config */
+ if (data->flags & LM90_PAUSE_FOR_CONFIG && config_orig != config_stop)
+ i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
+ config_orig);
+
+ return err;
+}
+
/*
* Set conversion rate.
* client->update_lock must be held when calling this function (unless we are
@@ -600,7 +634,7 @@ static int lm90_set_convrate(struct i2c_
if (interval >= update_interval * 3 / 4)
break;
- err = i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE, i);
+ err = lm90_write_convrate(client, data, i);
data->update_interval = DIV_ROUND_CLOSEST(update_interval, 64);
return err;
}
@@ -1606,8 +1640,7 @@ static void lm90_restore_conf(void *_dat
struct i2c_client *client = data->client;
/* Restore initial configuration */
- i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE,
- data->convrate_orig);
+ lm90_write_convrate(client, data, data->convrate_orig);
i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
data->config_orig);
}
@@ -1624,12 +1657,13 @@ static int lm90_init_client(struct i2c_c
/*
* Start the conversions.
*/
- lm90_set_convrate(client, data, 500); /* 500ms; 2Hz conversion rate */
config = lm90_read_reg(client, LM90_REG_R_CONFIG1);
if (config < 0)
return config;
data->config_orig = config;
+ lm90_set_convrate(client, data, 500); /* 500ms; 2Hz conversion rate */
+
/* Check Temperature Range Select */
if (data->kind == adt7461 || data->kind == tmp451) {
if (config & 0x04)
From: Greg Kroah-Hartman <[email protected]>
From: Ian Abbott <[email protected]>
commit 1c0f20b78781b9ca50dc3ecfd396d0db5b141890 upstream.
The analog input subdevice supports Comedi asynchronous commands that
use Comedi's 16-bit sample format. However, the call to
`comedi_buf_write_samples()` is passing the address of a 32-bit integer
variable. On bigendian machines, this will copy 2 bytes from the wrong
end of the 32-bit value. Fix it by changing the type of the variable
holding the sample value to `unsigned short`.
Fixes: d1d24cb65ee3 ("staging: comedi: das6402: read analog input samples in interrupt handler")
Cc: <[email protected]> # 3.19+
Signed-off-by: Ian Abbott <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/drivers/das6402.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/comedi/drivers/das6402.c
+++ b/drivers/staging/comedi/drivers/das6402.c
@@ -186,7 +186,7 @@ static irqreturn_t das6402_interrupt(int
if (status & DAS6402_STATUS_FFULL) {
async->events |= COMEDI_CB_OVERFLOW;
} else if (status & DAS6402_STATUS_FFNE) {
- unsigned int val;
+ unsigned short val;
val = das6402_ai_read_sample(dev, s);
comedi_buf_write_samples(s, &val, 1);
From: Greg Kroah-Hartman <[email protected]>
From: Lior Ribak <[email protected]>
commit e7850f4d844e0acfac7e570af611d89deade3146 upstream.
There is a deadlock in bm_register_write:
First, in the begining of the function, a lock is taken on the binfmt_misc
root inode with inode_lock(d_inode(root)).
Then, if the user used the MISC_FMT_OPEN_FILE flag, the function will call
open_exec on the user-provided interpreter.
open_exec will call a path lookup, and if the path lookup process includes
the root of binfmt_misc, it will try to take a shared lock on its inode
again, but it is already locked, and the code will get stuck in a deadlock
To reproduce the bug:
$ echo ":iiiii:E::ii::/proc/sys/fs/binfmt_misc/bla:F" > /proc/sys/fs/binfmt_misc/register
backtrace of where the lock occurs (#5):
0 schedule () at ./arch/x86/include/asm/current.h:15
1 0xffffffff81b51237 in rwsem_down_read_slowpath (sem=0xffff888003b202e0, count=<optimized out>, state=state@entry=2) at kernel/locking/rwsem.c:992
2 0xffffffff81b5150a in __down_read_common (state=2, sem=<optimized out>) at kernel/locking/rwsem.c:1213
3 __down_read (sem=<optimized out>) at kernel/locking/rwsem.c:1222
4 down_read (sem=<optimized out>) at kernel/locking/rwsem.c:1355
5 0xffffffff811ee22a in inode_lock_shared (inode=<optimized out>) at ./include/linux/fs.h:783
6 open_last_lookups (op=0xffffc9000022fe34, file=0xffff888004098600, nd=0xffffc9000022fd10) at fs/namei.c:3177
7 path_openat (nd=nd@entry=0xffffc9000022fd10, op=op@entry=0xffffc9000022fe34, flags=flags@entry=65) at fs/namei.c:3366
8 0xffffffff811efe1c in do_filp_open (dfd=<optimized out>, pathname=pathname@entry=0xffff8880031b9000, op=op@entry=0xffffc9000022fe34) at fs/namei.c:3396
9 0xffffffff811e493f in do_open_execat (fd=fd@entry=-100, name=name@entry=0xffff8880031b9000, flags=<optimized out>, flags@entry=0) at fs/exec.c:913
10 0xffffffff811e4a92 in open_exec (name=<optimized out>) at fs/exec.c:948
11 0xffffffff8124aa84 in bm_register_write (file=<optimized out>, buffer=<optimized out>, count=19, ppos=<optimized out>) at fs/binfmt_misc.c:682
12 0xffffffff811decd2 in vfs_write (file=file@entry=0xffff888004098500, buf=buf@entry=0xa758d0 ":iiiii:E::ii::i:CF
", count=count@entry=19, pos=pos@entry=0xffffc9000022ff10) at fs/read_write.c:603
13 0xffffffff811defda in ksys_write (fd=<optimized out>, buf=0xa758d0 ":iiiii:E::ii::i:CF
", count=19) at fs/read_write.c:658
14 0xffffffff81b49813 in do_syscall_64 (nr=<optimized out>, regs=0xffffc9000022ff58) at arch/x86/entry/common.c:46
15 0xffffffff81c0007c in entry_SYSCALL_64 () at arch/x86/entry/entry_64.S:120
To solve the issue, the open_exec call is moved to before the write
lock is taken by bm_register_write
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 948b701a607f1 ("binfmt_misc: add persistent opened binary handler for containers")
Signed-off-by: Lior Ribak <[email protected]>
Acked-by: Helge Deller <[email protected]>
Cc: Al Viro <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/binfmt_misc.c | 29 ++++++++++++++---------------
1 file changed, 14 insertions(+), 15 deletions(-)
--- a/fs/binfmt_misc.c
+++ b/fs/binfmt_misc.c
@@ -694,12 +694,24 @@ static ssize_t bm_register_write(struct
struct super_block *sb = file_inode(file)->i_sb;
struct dentry *root = sb->s_root, *dentry;
int err = 0;
+ struct file *f = NULL;
e = create_entry(buffer, count);
if (IS_ERR(e))
return PTR_ERR(e);
+ if (e->flags & MISC_FMT_OPEN_FILE) {
+ f = open_exec(e->interpreter);
+ if (IS_ERR(f)) {
+ pr_notice("register: failed to install interpreter file %s\n",
+ e->interpreter);
+ kfree(e);
+ return PTR_ERR(f);
+ }
+ e->interp_file = f;
+ }
+
inode_lock(d_inode(root));
dentry = lookup_one_len(e->name, root, strlen(e->name));
err = PTR_ERR(dentry);
@@ -723,21 +735,6 @@ static ssize_t bm_register_write(struct
goto out2;
}
- if (e->flags & MISC_FMT_OPEN_FILE) {
- struct file *f;
-
- f = open_exec(e->interpreter);
- if (IS_ERR(f)) {
- err = PTR_ERR(f);
- pr_notice("register: failed to install interpreter file %s\n", e->interpreter);
- simple_release_fs(&bm_mnt, &entry_count);
- iput(inode);
- inode = NULL;
- goto out2;
- }
- e->interp_file = f;
- }
-
e->dentry = dget(dentry);
inode->i_private = e;
inode->i_fop = &bm_entry_operations;
@@ -754,6 +751,8 @@ out:
inode_unlock(d_inode(root));
if (err) {
+ if (f)
+ filp_close(f, NULL);
kfree(e);
return err;
}
From: Greg Kroah-Hartman <[email protected]>
From: Juergen Gross <[email protected]>
commit b6622798bc50b625a1e62f82c7190df40c1f5b21 upstream.
When changing the cpu affinity of an event it can happen today that
(with some unlucky timing) the same event will be handled on the old
and the new cpu at the same time.
Avoid that by adding an "event active" flag to the per-event data and
call the handler only if this flag isn't set.
Cc: [email protected]
Reported-by: Julien Grall <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Julien Grall <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/xen/events/events_base.c | 25 +++++++++++++++++--------
drivers/xen/events/events_internal.h | 1 +
2 files changed, 18 insertions(+), 8 deletions(-)
--- a/drivers/xen/events/events_base.c
+++ b/drivers/xen/events/events_base.c
@@ -693,6 +693,12 @@ static void xen_evtchn_close(unsigned in
BUG();
}
+static void event_handler_exit(struct irq_info *info)
+{
+ smp_store_release(&info->is_active, 0);
+ clear_evtchn(info->evtchn);
+}
+
static void pirq_query_unmask(int irq)
{
struct physdev_irq_status_query irq_status;
@@ -723,13 +729,13 @@ static void eoi_pirq(struct irq_data *da
likely(!irqd_irq_disabled(data))) {
do_mask(info, EVT_MASK_REASON_TEMPORARY);
- clear_evtchn(evtchn);
+ event_handler_exit(info);
irq_move_masked_irq(data);
do_unmask(info, EVT_MASK_REASON_TEMPORARY);
} else
- clear_evtchn(evtchn);
+ event_handler_exit(info);
if (pirq_needs_eoi(data->irq)) {
rc = HYPERVISOR_physdev_op(PHYSDEVOP_eoi, &eoi);
@@ -1565,6 +1571,8 @@ void handle_irq_for_port(evtchn_port_t p
}
info = info_for_irq(irq);
+ if (xchg_acquire(&info->is_active, 1))
+ return;
if (ctrl->defer_eoi) {
info->eoi_cpu = smp_processor_id();
@@ -1752,13 +1760,13 @@ static void ack_dynirq(struct irq_data *
likely(!irqd_irq_disabled(data))) {
do_mask(info, EVT_MASK_REASON_TEMPORARY);
- clear_evtchn(evtchn);
+ event_handler_exit(info);
irq_move_masked_irq(data);
do_unmask(info, EVT_MASK_REASON_TEMPORARY);
} else
- clear_evtchn(evtchn);
+ event_handler_exit(info);
}
static void mask_ack_dynirq(struct irq_data *data)
@@ -1774,7 +1782,7 @@ static void lateeoi_ack_dynirq(struct ir
if (VALID_EVTCHN(evtchn)) {
do_mask(info, EVT_MASK_REASON_EOI_PENDING);
- clear_evtchn(evtchn);
+ event_handler_exit(info);
}
}
@@ -1785,7 +1793,7 @@ static void lateeoi_mask_ack_dynirq(stru
if (VALID_EVTCHN(evtchn)) {
do_mask(info, EVT_MASK_REASON_EXPLICIT);
- clear_evtchn(evtchn);
+ event_handler_exit(info);
}
}
@@ -1894,10 +1902,11 @@ static void restore_cpu_ipis(unsigned in
/* Clear an irq's pending state, in preparation for polling on it */
void xen_clear_irq_pending(int irq)
{
- int evtchn = evtchn_from_irq(irq);
+ struct irq_info *info = info_for_irq(irq);
+ evtchn_port_t evtchn = info ? info->evtchn : 0;
if (VALID_EVTCHN(evtchn))
- clear_evtchn(evtchn);
+ event_handler_exit(info);
}
EXPORT_SYMBOL(xen_clear_irq_pending);
void xen_set_irq_pending(int irq)
--- a/drivers/xen/events/events_internal.h
+++ b/drivers/xen/events/events_internal.h
@@ -40,6 +40,7 @@ struct irq_info {
#define EVT_MASK_REASON_EXPLICIT 0x01
#define EVT_MASK_REASON_TEMPORARY 0x02
#define EVT_MASK_REASON_EOI_PENDING 0x04
+ u8 is_active; /* Is event just being handled? */
unsigned irq;
unsigned int evtchn; /* event channel */
unsigned short cpu; /* cpu bound */
From: Greg Kroah-Hartman <[email protected]>
From: Marc Zyngier <[email protected]>
Commit 262b003d059c6671601a19057e9fe1a5e7f23722 upstream.
When registering a memslot, we check the size and location of that
memslot against the IPA size to ensure that we can provide guest
access to the whole of the memory.
Unfortunately, this check rejects memslot that end-up at the exact
limit of the addressing capability for a given IPA size. For example,
it refuses the creation of a 2GB memslot at 0x8000000 with a 32bit
IPA space.
Fix it by relaxing the check to accept a memslot reaching the
limit of the IPA space.
Fixes: c3058d5da222 ("arm/arm64: KVM: Ensure memslots are within KVM_PHYS_SIZE")
Reviewed-by: Eric Auger <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Cc: [email protected] # 4.4, 4.9, 4.14, 4.19
Reviewed-by: Andrew Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
virt/kvm/arm/mmu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/virt/kvm/arm/mmu.c
+++ b/virt/kvm/arm/mmu.c
@@ -2080,7 +2080,7 @@ int kvm_arch_prepare_memory_region(struc
* Prevent userspace from creating a memory region outside of the IPA
* space addressable by the KVM guest IPA space.
*/
- if (memslot->base_gfn + memslot->npages >=
+ if (memslot->base_gfn + memslot->npages >
(KVM_PHYS_SIZE >> PAGE_SHIFT))
return -EFAULT;
From: Greg Kroah-Hartman <[email protected]>
From: Josh Poimboeuf <[email protected]>
commit e504e74cc3a2c092b05577ce3e8e013fae7d94e6 upstream.
KASAN reserves "redzone" areas between stack frames in order to detect
stack overruns. A read or write to such an area triggers a KASAN
"stack-out-of-bounds" BUG.
Normally, the ORC unwinder stays in-bounds and doesn't access the
redzone. But sometimes it can't find ORC metadata for a given
instruction. This can happen for code which is missing ORC metadata, or
for generated code. In such cases, the unwinder attempts to fall back
to frame pointers, as a best-effort type thing.
This fallback often works, but when it doesn't, the unwinder can get
confused and go off into the weeds into the KASAN redzone, triggering
the aforementioned KASAN BUG.
But in this case, the unwinder's confusion is actually harmless and
working as designed. It already has checks in place to prevent
off-stack accesses, but those checks get short-circuited by the KASAN
BUG. And a BUG is a lot more disruptive than a harmless unwinder
warning.
Disable the KASAN checks by using READ_ONCE_NOCHECK() for all stack
accesses. This finishes the job started by commit 881125bfe65b
("x86/unwind: Disable KASAN checking in the ORC unwinder"), which only
partially fixed the issue.
Fixes: ee9f8fce9964 ("x86/unwind: Add the ORC unwinder")
Reported-by: Ivan Babrou <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Steven Rostedt (VMware) <[email protected]>
Tested-by: Ivan Babrou <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/9583327904ebbbeda399eca9c56d6c7085ac20fe.1612534649.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/unwind_orc.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/arch/x86/kernel/unwind_orc.c
+++ b/arch/x86/kernel/unwind_orc.c
@@ -346,8 +346,8 @@ static bool deref_stack_regs(struct unwi
if (!stack_access_ok(state, addr, sizeof(struct pt_regs)))
return false;
- *ip = regs->ip;
- *sp = regs->sp;
+ *ip = READ_ONCE_NOCHECK(regs->ip);
+ *sp = READ_ONCE_NOCHECK(regs->sp);
return true;
}
@@ -359,8 +359,8 @@ static bool deref_stack_iret_regs(struct
if (!stack_access_ok(state, addr, IRET_FRAME_SIZE))
return false;
- *ip = regs->ip;
- *sp = regs->sp;
+ *ip = READ_ONCE_NOCHECK(regs->ip);
+ *sp = READ_ONCE_NOCHECK(regs->sp);
return true;
}
@@ -381,12 +381,12 @@ static bool get_reg(struct unwind_state
return false;
if (state->full_regs) {
- *val = ((unsigned long *)state->regs)[reg];
+ *val = READ_ONCE_NOCHECK(((unsigned long *)state->regs)[reg]);
return true;
}
if (state->prev_regs) {
- *val = ((unsigned long *)state->prev_regs)[reg];
+ *val = READ_ONCE_NOCHECK(((unsigned long *)state->prev_regs)[reg]);
return true;
}
From: Greg Kroah-Hartman <[email protected]>
From: Ian Abbott <[email protected]>
commit 148e34fd33d53740642db523724226de14ee5281 upstream.
The analog input subdevice supports Comedi asynchronous commands that
use Comedi's 16-bit sample format. However, the call to
`comedi_buf_write_samples()` is passing the address of a 32-bit integer
parameter. On bigendian machines, this will copy 2 bytes from the wrong
end of the 32-bit value. Fix it by changing the type of the parameter
holding the sample value to `unsigned short`.
[Note: the bug was introduced in commit edf4537bcbf5 ("staging: comedi:
pcl818: use comedi_buf_write_samples()") but the patch applies better to
commit d615416de615 ("staging: comedi: pcl818: introduce
pcl818_ai_write_sample()").]
Fixes: d615416de615 ("staging: comedi: pcl818: introduce pcl818_ai_write_sample()")
Cc: <[email protected]> # 4.0+
Signed-off-by: Ian Abbott <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/drivers/pcl818.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/comedi/drivers/pcl818.c
+++ b/drivers/staging/comedi/drivers/pcl818.c
@@ -423,7 +423,7 @@ static int pcl818_ai_eoc(struct comedi_d
static bool pcl818_ai_write_sample(struct comedi_device *dev,
struct comedi_subdevice *s,
- unsigned int chan, unsigned int val)
+ unsigned int chan, unsigned short val)
{
struct pcl818_private *devpriv = dev->private;
struct comedi_cmd *cmd = &s->async->cmd;
From: Greg Kroah-Hartman <[email protected]>
From: Juergen Gross <[email protected]>
commit 9e77d96b8e2724ed00380189f7b0ded61113b39f upstream.
When creating a new event channel with 2-level events the affinity
needs to be reset initially in order to avoid using an old affinity
from earlier usage of the event channel port. So when tearing an event
channel down reset all affinity bits.
The same applies to the affinity when onlining a vcpu: all old
affinity settings for this vcpu must be reset. As percpu events get
initialized before the percpu event channel hook is called,
resetting of the affinities happens after offlining a vcpu (this is
working, as initial percpu memory is zeroed out).
Cc: [email protected]
Reported-by: Julien Grall <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Julien Grall <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/xen/events/events_2l.c | 15 +++++++++++++++
drivers/xen/events/events_base.c | 1 +
drivers/xen/events/events_internal.h | 8 ++++++++
3 files changed, 24 insertions(+)
--- a/drivers/xen/events/events_2l.c
+++ b/drivers/xen/events/events_2l.c
@@ -47,6 +47,11 @@ static unsigned evtchn_2l_max_channels(v
return EVTCHN_2L_NR_CHANNELS;
}
+static void evtchn_2l_remove(evtchn_port_t evtchn, unsigned int cpu)
+{
+ clear_bit(evtchn, BM(per_cpu(cpu_evtchn_mask, cpu)));
+}
+
static void evtchn_2l_bind_to_cpu(struct irq_info *info, unsigned cpu)
{
clear_bit(info->evtchn, BM(per_cpu(cpu_evtchn_mask, info->cpu)));
@@ -354,9 +359,18 @@ static void evtchn_2l_resume(void)
EVTCHN_2L_NR_CHANNELS/BITS_PER_EVTCHN_WORD);
}
+static int evtchn_2l_percpu_deinit(unsigned int cpu)
+{
+ memset(per_cpu(cpu_evtchn_mask, cpu), 0, sizeof(xen_ulong_t) *
+ EVTCHN_2L_NR_CHANNELS/BITS_PER_EVTCHN_WORD);
+
+ return 0;
+}
+
static const struct evtchn_ops evtchn_ops_2l = {
.max_channels = evtchn_2l_max_channels,
.nr_channels = evtchn_2l_max_channels,
+ .remove = evtchn_2l_remove,
.bind_to_cpu = evtchn_2l_bind_to_cpu,
.clear_pending = evtchn_2l_clear_pending,
.set_pending = evtchn_2l_set_pending,
@@ -366,6 +380,7 @@ static const struct evtchn_ops evtchn_op
.unmask = evtchn_2l_unmask,
.handle_events = evtchn_2l_handle_events,
.resume = evtchn_2l_resume,
+ .percpu_deinit = evtchn_2l_percpu_deinit,
};
void __init xen_evtchn_2l_init(void)
--- a/drivers/xen/events/events_base.c
+++ b/drivers/xen/events/events_base.c
@@ -285,6 +285,7 @@ static int xen_irq_info_pirq_setup(unsig
static void xen_irq_info_cleanup(struct irq_info *info)
{
set_evtchn_to_irq(info->evtchn, -1);
+ xen_evtchn_port_remove(info->evtchn, info->cpu);
info->evtchn = 0;
}
--- a/drivers/xen/events/events_internal.h
+++ b/drivers/xen/events/events_internal.h
@@ -67,6 +67,7 @@ struct evtchn_ops {
unsigned (*nr_channels)(void);
int (*setup)(struct irq_info *info);
+ void (*remove)(evtchn_port_t port, unsigned int cpu);
void (*bind_to_cpu)(struct irq_info *info, unsigned cpu);
void (*clear_pending)(unsigned port);
@@ -109,6 +110,13 @@ static inline int xen_evtchn_port_setup(
return 0;
}
+static inline void xen_evtchn_port_remove(evtchn_port_t evtchn,
+ unsigned int cpu)
+{
+ if (evtchn_ops->remove)
+ evtchn_ops->remove(evtchn, cpu);
+}
+
static inline void xen_evtchn_port_bind_to_cpu(struct irq_info *info,
unsigned cpu)
{
From: Greg Kroah-Hartman <[email protected]>
From: Danielle Ratson <[email protected]>
commit edcbf5137f093b5502f5f6b97cce3cbadbde27aa upstream.
When mirroring to a gretap in hardware the device expects to be
programmed with the egress port and all the encapsulating headers. This
requires the driver to resolve the path the packet will take in the
software data path and program the device accordingly.
If the path cannot be resolved (in this case because of an unresolved
neighbor), then mirror installation fails until the path is resolved.
This results in a race that causes the test to sometimes fail.
Fix this by setting the neighbor's state to permanent, so that it is
always valid.
Fixes: b5b029399fa6d ("selftests: forwarding: mirror_gre_bridge_1d_vlan: Add STP test")
Signed-off-by: Danielle Ratson <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d_vlan.sh | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d_vlan.sh
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d_vlan.sh
@@ -86,11 +86,20 @@ test_ip6gretap()
test_gretap_stp()
{
+ # Sometimes after mirror installation, the neighbor's state is not valid.
+ # The reason is that there is no SW datapath activity related to the
+ # neighbor for the remote GRE address. Therefore whether the corresponding
+ # neighbor will be valid is a matter of luck, and the test is thus racy.
+ # Set the neighbor's state to permanent, so it would be always valid.
+ ip neigh replace 192.0.2.130 lladdr $(mac_get $h3) \
+ nud permanent dev br2
full_test_span_gre_stp gt4 $swp3.555 "mirror to gretap"
}
test_ip6gretap_stp()
{
+ ip neigh replace 2001:db8:2::2 lladdr $(mac_get $h3) \
+ nud permanent dev br2
full_test_span_gre_stp gt6 $swp3.555 "mirror to ip6gretap"
}
Hi!
> This is the start of the stable review cycle for the 4.19.181 release.
> There are 120 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
CIP testing did not find any kernel problems here: (Renesas boards
are still unavailable)
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.4.y
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y
Tested-by: Pavel Machek (CIP) <[email protected]>
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Mon, 15 Mar 2021 14:55:51 +0100
[email protected] wrote:
> From: Greg Kroah-Hartman <[email protected]>
>
> This is the start of the stable review cycle for the 4.19.181 release.
Tested on amd64, arm64, armhf, i386, m68k, or1k, powerpc, ppc64,
ppc64el, riscv64, s390x, sparc64. No problems detected.
Tested-by: Jason Self <[email protected]>
Hi!
> > From: Greg Kroah-Hartman <[email protected]>
> >
> > From: Eric Dumazet <[email protected]>
>
> Dup.
Aha, sorry, crossed mails. Still I wonder if hiding assignment into
macro is good:
> > --- a/net/ipv4/tcp_minisocks.c
> > +++ b/net/ipv4/tcp_minisocks.c
> > @@ -510,7 +510,7 @@ struct sock *tcp_create_openreq_child(co
> > newtp->app_limited = ~0U;
> >
> > tcp_init_xmit_timers(newsk);
> > - newtp->write_seq = newtp->pushed_seq = treq->snt_isn + 1;
> > + WRITE_ONCE(newtp->write_seq, newtp->pushed_seq = treq->snt_isn + 1);
>
> Would it be better to do assignment to pushed_seq outside of
> WRITE_ONCE macro? This is ... "interesting".
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Mon, 15 Mar 2021 at 19:29, <[email protected]> wrote:
>
> From: Greg Kroah-Hartman <[email protected]>
>
> This is the start of the stable review cycle for the 4.19.181 release.
> There are 120 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 17 Mar 2021 13:57:02 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.181-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
Summary
------------------------------------------------------------------------
kernel: 4.19.181-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: a636947af93f0a20fdba2c08ae38b7825ebf9c56
git describe: v4.19.180-121-ga636947af93f
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.180-121-ga636947af93f
No regressions (compared to build v4.19.180)
No fixes (compared to build v4.19.180)
Ran 49481 total tests in the following environments and test suites.
Environments
--------------
- arm
- arm64
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- mips
- nxp-ls2088
- nxp-ls2088-64k_page_size
- qemu-arm64-clang
- qemu-arm64-kasan
- qemu-x86_64-clang
- qemu-x86_64-kasan
- qemu_arm
- qemu_arm64
- qemu_arm64-compat
- qemu_i386
- qemu_x86_64
- qemu_x86_64-compat
- s390
- sparc
- x15 - arm
- x86_64
- x86-kasan
- x86_64
Test Suites
-----------
* build
* linux-log-parser
* install-android-platform-tools-r2600
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-lib
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-zram
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* perf
* v4l2-compliance
* fwts
* kselftest-intel_pstate
* kselftest-livepatch
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-ptrace
* kselftest-tc-testing
* ltp-fs-tests
* ltp-sched-tests
* network-basic-tests
* kselftest-
* kselftest-kexec
* kselftest-kvm
* kselftest-vm
* kselftest-x86
* ltp-open-posix-tests
* kvm-unit-tests
* rcutorture
* igt-gpu-tools
* ssuite
* kselftest-vsyscall-mode-native-
* kselftest-vsyscall-mode-none-
--
Linaro LKFT
https://lkft.linaro.org
Hi!
> From: Greg Kroah-Hartman <[email protected]>
>
> From: Eric Dumazet <[email protected]>
Two From: fields here.
> [ Upstream commit 7db48e983930285b765743ebd665aecf9850582b ]
>
> There are few places where we fetch tp->copied_seq while
> this field can change from IRQ or other cpu.
And there are few such places even after the patch is applied; I
quoted them below.
Doing addition to variable without locking... is kind of
interesting. Are you sure it is okay?
> @@ -2112,7 +2112,7 @@ int tcp_recvmsg(struct sock *sk, struct
> if (urg_offset < used) {
> if (!urg_offset) {
> if (!sock_flag(sk, SOCK_URGINLINE)) {
> - ++*seq;
> + WRITE_ONCE(*seq, *seq + 1);
> urg_hole++;
> offset++;
> used--;
> @@ -2134,7 +2134,7 @@ int tcp_recvmsg(struct sock *sk, struct
> }
> }
>
> - *seq += used;
> + WRITE_ONCE(*seq, *seq + used);
> copied += used;
> len -= used;
>
> @@ -2163,7 +2163,7 @@ skip_copy:
>
> found_fin_ok:
> /* Process the FIN. */
> - ++*seq;
> + WRITE_ONCE(*seq, *seq + 1);
> if (!(flags & MSG_PEEK))
> sk_eat_skb(sk, skb);
> break;
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Tue, Mar 16, 2021 at 10:41:37AM +0100, Pavel Machek wrote:
> Hi!
>
> > From: Greg Kroah-Hartman <[email protected]>
> >
> > From: Eric Dumazet <[email protected]>
>
> Two From: fields here.
This is a side-affect of me using git-send-email to talk to the remote
smtp server directly instead of using my local email server. This was
done to increase the speed of sending these patches out as
git-send-email can pipeline messages instead of having msmtp do a
setup/send/teardown on every individual message sent.
These are not in the patches themselves and I will work to figure out
if this can be fixed. Gotta be a setting somewhere...
>
> > [ Upstream commit 7db48e983930285b765743ebd665aecf9850582b ]
> >
> > There are few places where we fetch tp->copied_seq while
> > this field can change from IRQ or other cpu.
>
> And there are few such places even after the patch is applied; I
> quoted them below.
>
> Doing addition to variable without locking... is kind of
> interesting. Are you sure it is okay?
Why isn't it?
thanks,
greg k-h
On Tue, Mar 16, 2021 at 10:41 AM Pavel Machek <[email protected]> wrote:
>
> Hi!
>
> > From: Greg Kroah-Hartman <[email protected]>
> >
> > From: Eric Dumazet <[email protected]>
>
> Two From: fields here.
>
> > [ Upstream commit 7db48e983930285b765743ebd665aecf9850582b ]
> >
> > There are few places where we fetch tp->copied_seq while
> > this field can change from IRQ or other cpu.
>
> And there are few such places even after the patch is applied; I
> quoted them below.
>
> Doing addition to variable without locking... is kind of
> interesting. Are you sure it is okay?
We are holding the socket lock here.
The WRITE_ONCE() here is paired with sides doing READ_ONCE() while
socket lock is _not_ held.
We want to make sure compiler won't write into this variable one byte at a time,
or using stupid things.
>
> > @@ -2112,7 +2112,7 @@ int tcp_recvmsg(struct sock *sk, struct
> > if (urg_offset < used) {
> > if (!urg_offset) {
> > if (!sock_flag(sk, SOCK_URGINLINE)) {
> > - ++*seq;
> > + WRITE_ONCE(*seq, *seq + 1);
> > urg_hole++;
> > offset++;
> > used--;
> > @@ -2134,7 +2134,7 @@ int tcp_recvmsg(struct sock *sk, struct
> > }
> > }
> >
> > - *seq += used;
> > + WRITE_ONCE(*seq, *seq + used);
> > copied += used;
> > len -= used;
> >
> > @@ -2163,7 +2163,7 @@ skip_copy:
> >
> > found_fin_ok:
> > /* Process the FIN. */
> > - ++*seq;
> > + WRITE_ONCE(*seq, *seq + 1);
> > if (!(flags & MSG_PEEK))
> > sk_eat_skb(sk, skb);
> > break;
>
> Best regards,
> Pavel
> --
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Hi!
> From: Greg Kroah-Hartman <[email protected]>
>
> From: Eric Dumazet <[email protected]>
Dup.
> We need to add READ_ONCE() annotations, and also make
> sure write sides use corresponding WRITE_ONCE() to avoid
> store-tearing.
> @@ -1037,7 +1037,7 @@ new_segment:
> sk->sk_wmem_queued += copy;
> sk_mem_charge(sk, copy);
> skb->ip_summed = CHECKSUM_PARTIAL;
> - tp->write_seq += copy;
> + WRITE_ONCE(tp->write_seq, tp->write_seq + copy);
> TCP_SKB_CB(skb)->end_seq += copy;
> tcp_skb_pcount_set(skb, 0);
>
I wonder if this needs to do READ_ONCE, too?
> @@ -1391,7 +1391,7 @@ new_segment:
> if (!copied)
> TCP_SKB_CB(skb)->tcp_flags &= ~TCPHDR_PSH;
>
> - tp->write_seq += copy;
> + WRITE_ONCE(tp->write_seq, tp->write_seq + copy);
> TCP_SKB_CB(skb)->end_seq += copy;
> tcp_skb_pcount_set(skb, 0);
>
And here.
> @@ -2593,9 +2594,12 @@ int tcp_disconnect(struct sock *sk, int
> sock_reset_flag(sk, SOCK_DONE);
> tp->srtt_us = 0;
> tp->rcv_rtt_last_tsecr = 0;
> - tp->write_seq += tp->max_window + 2;
> - if (tp->write_seq == 0)
> - tp->write_seq = 1;
> +
> + seq = tp->write_seq + tp->max_window + 2;
> + if (!seq)
> + seq = 1;
> + WRITE_ONCE(tp->write_seq, seq);
And here.
> --- a/net/ipv4/tcp_minisocks.c
> +++ b/net/ipv4/tcp_minisocks.c
> @@ -510,7 +510,7 @@ struct sock *tcp_create_openreq_child(co
> newtp->app_limited = ~0U;
>
> tcp_init_xmit_timers(newsk);
> - newtp->write_seq = newtp->pushed_seq = treq->snt_isn + 1;
> + WRITE_ONCE(newtp->write_seq, newtp->pushed_seq = treq->snt_isn + 1);
Would it be better to do assignment to pushed_seq outside of
WRITE_ONCE macro? This is ... "interesting".
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Tue, Mar 16, 2021 at 10:50 AM Pavel Machek <[email protected]> wrote:
>
> Hi!
>
> > From: Greg Kroah-Hartman <[email protected]>
> >
> > From: Eric Dumazet <[email protected]>
>
> Dup.
>
>
> > We need to add READ_ONCE() annotations, and also make
> > sure write sides use corresponding WRITE_ONCE() to avoid
> > store-tearing.
>
> > @@ -1037,7 +1037,7 @@ new_segment:
> > sk->sk_wmem_queued += copy;
> > sk_mem_charge(sk, copy);
> > skb->ip_summed = CHECKSUM_PARTIAL;
> > - tp->write_seq += copy;
> > + WRITE_ONCE(tp->write_seq, tp->write_seq + copy);
> > TCP_SKB_CB(skb)->end_seq += copy;
> > tcp_skb_pcount_set(skb, 0);
> >
>
> I wonder if this needs to do READ_ONCE, too?
No, because we hold the socket lock.
This is a backport to ease another backport, please try to review
patches when they hit mainline, if you have any concerns.
>
> > @@ -1391,7 +1391,7 @@ new_segment:
> > if (!copied)
> > TCP_SKB_CB(skb)->tcp_flags &= ~TCPHDR_PSH;
> >
> > - tp->write_seq += copy;
> > + WRITE_ONCE(tp->write_seq, tp->write_seq + copy);
> > TCP_SKB_CB(skb)->end_seq += copy;
> > tcp_skb_pcount_set(skb, 0);
> >
>
> And here.
>
> > @@ -2593,9 +2594,12 @@ int tcp_disconnect(struct sock *sk, int
> > sock_reset_flag(sk, SOCK_DONE);
> > tp->srtt_us = 0;
> > tp->rcv_rtt_last_tsecr = 0;
> > - tp->write_seq += tp->max_window + 2;
> > - if (tp->write_seq == 0)
> > - tp->write_seq = 1;
> > +
> > + seq = tp->write_seq + tp->max_window + 2;
> > + if (!seq)
> > + seq = 1;
> > + WRITE_ONCE(tp->write_seq, seq);
>
> And here.
>
> > --- a/net/ipv4/tcp_minisocks.c
> > +++ b/net/ipv4/tcp_minisocks.c
> > @@ -510,7 +510,7 @@ struct sock *tcp_create_openreq_child(co
> > newtp->app_limited = ~0U;
> >
> > tcp_init_xmit_timers(newsk);
> > - newtp->write_seq = newtp->pushed_seq = treq->snt_isn + 1;
> > + WRITE_ONCE(newtp->write_seq, newtp->pushed_seq = treq->snt_isn + 1);
>
> Would it be better to do assignment to pushed_seq outside of
> WRITE_ONCE macro? This is ... "interesting".
>
> Best regards,
> Pavel
> --
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Tue, Mar 16, 2021 at 10:50 AM Pavel Machek <[email protected]> wrote:
>
> > --- a/net/ipv4/tcp_minisocks.c
> > +++ b/net/ipv4/tcp_minisocks.c
> > @@ -510,7 +510,7 @@ struct sock *tcp_create_openreq_child(co
> > newtp->app_limited = ~0U;
> >
> > tcp_init_xmit_timers(newsk);
> > - newtp->write_seq = newtp->pushed_seq = treq->snt_isn + 1;
> > + WRITE_ONCE(newtp->write_seq, newtp->pushed_seq = treq->snt_isn + 1);
>
> Would it be better to do assignment to pushed_seq outside of
> WRITE_ONCE macro? This is ... "interesting".
You are probably right, this looks odd and was not something I intended.
It happened to just work, but feel free to send a patch to clean it up.
Thanks.
On Mon, Mar 15, 2021 at 02:55:51PM +0100, [email protected] wrote:
> From: Greg Kroah-Hartman <[email protected]>
>
> This is the start of the stable review cycle for the 4.19.181 release.
> There are 120 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 17 Mar 2021 13:57:02 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 155 pass: 155 fail: 0
Qemu test results:
total: 419 pass: 419 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
On 2021/3/15 21:55, [email protected] wrote:
> From: Greg Kroah-Hartman <[email protected]>
>
> This is the start of the stable review cycle for the 4.19.181 release.
> There are 120 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 17 Mar 2021 13:57:02 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.181-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested on arm64 and x86 for 4.19.181-rc1,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.19.y
Version: 4.19.181-rc1
Commit: a636947af93f0a20fdba2c08ae38b7825ebf9c56
Compiler: gcc version 7.3.0 (GCC)
arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total_num: 4740
succeed_num: 4740
failed_num: 0
timeout_num: 0
x86 (No kernel failures)
--------------------------------------------------------------------
Testcase Result Summary:
total_num: 4740
succeed_num: 4739
failed_num: 1
timeout_num: 0
Tested-by: Hulk Robot <[email protected]>
On Mon, Mar 15, 2021 at 02:55:51PM +0100, [email protected] wrote:
> From: Greg Kroah-Hartman <[email protected]>
>
> This is the start of the stable review cycle for the 4.19.181 release.
> There are 120 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
Compiled and booted with no regressions on x86_64.
Tested-by: Ross Schmidt <[email protected]>
thanks,
Ross
On 2021/3/15 21:55, [email protected] wrote:
> From: Greg Kroah-Hartman <[email protected]>
>
> This is the start of the stable review cycle for the 4.19.181 release.
> There are 120 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 17 Mar 2021 13:57:02 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.181-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested on arm64 for 4.19.181,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.19.y
Version: 4.19.181
Commit: ac3af4beac439ebccd17746c9f2fd227e88107aa
Compiler: gcc version 7.3.0 (GCC)
arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 4726
passed: 4721
failed: 5
--------------------------------------------------------------------
Failed cases:
ltp test_robind24
ltp test_robind25
ltp test_robind26
ltp test_robind27
ltp test_robind28
The 5 failed cases are caused by insufficient disk space in the test
environment, no kernel failures
--------------------------------------------------------------------
Tested-by: Hulk Robot <[email protected]>
On 2021/3/15 21:55, [email protected] wrote:
> From: Greg Kroah-Hartman <[email protected]>
>
> This is the start of the stable review cycle for the 4.19.181 release.
> There are 120 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 17 Mar 2021 13:57:02 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.181-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested on x86 for 4.19.181,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.19.y
Version: 4.19.181
Commit: ac3af4beac439ebccd17746c9f2fd227e88107aa
Compiler: gcc version 7.3.0 (GCC)
x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 4688
passed: 4688
failed: 0
timeout: 0
--------------------------------------------------------------------
Tested-by: Hulk Robot <[email protected]>
On Thu, Mar 18, 2021 at 07:59:59PM +0800, Samuel Zou wrote:
>
>
> On 2021/3/15 21:55, [email protected] wrote:
> > From: Greg Kroah-Hartman <[email protected]>
> >
> > This is the start of the stable review cycle for the 4.19.181 release.
> > There are 120 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed, 17 Mar 2021 13:57:02 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.181-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> >
>
> Tested on arm64 for 4.19.181,
>
> Kernel repo:
> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> Branch: linux-4.19.y
> Version: 4.19.181
> Commit: ac3af4beac439ebccd17746c9f2fd227e88107aa
> Compiler: gcc version 7.3.0 (GCC)
>
> arm64:
> --------------------------------------------------------------------
> Testcase Result Summary:
> total: 4726
> passed: 4721
> failed: 5
> --------------------------------------------------------------------
> Failed cases:
> ltp test_robind24
> ltp test_robind25
> ltp test_robind26
> ltp test_robind27
> ltp test_robind28
>
> The 5 failed cases are caused by insufficient disk space in the test
> environment, no kernel failures
> --------------------------------------------------------------------
>
> Tested-by: Hulk Robot <[email protected]>
>
Thanks for the testing and letting me know.
greg k-h