On Thu, Apr 01, 2021 at 01:55:58PM +0200, Martin Kepplinger wrote:
> This reverts commit 9de499997c3737e0c0207beb03615b320cabe495.
>
You do not put a reason here, so I can not take this :(
Please fix up and resend.
thanks,
greg k-h
commit 9de499997c ("usb: dwc3: gadget: Prevent EP queuing while stopping
transfers") results in the below error every time I connect the type-c
connector to the dwc3, configured with serial and ethernet gadgets.
I also apply the following to dwc3 on this port:
dr_mode = "otg";
snps,dis_u3_susphy_quirk;
hnp-disable;
srp-disable;
adp-disable;
usb-role-switch;
[ 51.148220] ------------[ cut here ]------------
[ 51.148241] dwc3 38100000.usb: No resource for ep2in
[ 51.148376] WARNING: CPU: 0 PID: 299 at drivers/usb/dwc3/gadget.c:360 dwc3_send_gadget_ep_cmd+0x570/0x740 [dwc3]
[ 51.148837] CPU: 0 PID: 299 Comm: irq/64-dwc3 Not tainted 5.11.11-librem5-00334-ge4c4ff3624e9 #218
[ 51.148848] Hardware name: Purism Librem 5r4 (DT)
[ 51.148854] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--)
[ 51.148863] pc : dwc3_send_gadget_ep_cmd+0x570/0x740 [dwc3]
[ 51.148894] lr : dwc3_send_gadget_ep_cmd+0x570/0x740 [dwc3]
[ 51.148924] sp : ffff800011cb3ac0
[ 51.148929] x29: ffff800011cb3ac0 x28: ffff0000032a7b00
[ 51.148942] x27: ffff00000327da00 x26: 0000000000000000
[ 51.148954] x25: 00000000ffffffea x24: 0000000000000006
[ 51.148967] x23: ffff0000bee1c080 x22: ffff800011cb3b7c
[ 51.148979] x21: 0000000000000406 x20: ffff0000bf170000
[ 51.148992] x19: 0000000000000001 x18: 0000000000000000
[ 51.149004] x17: 0000000000000000 x16: 0000000000000000
[ 51.149016] x15: 0000000000000000 x14: ffff8000114512c0
[ 51.149028] x13: 0000000000001698 x12: 0000000000000040
[ 51.149040] x11: ffff80001151a6f8 x10: 00000000ffffe000
[ 51.149052] x9 : ffff8000100b2b7c x8 : ffff80001146a6f8
[ 51.149065] x7 : ffff80001151a6f8 x6 : 0000000000000000
[ 51.149077] x5 : ffff0000bf939948 x4 : 0000000000000000
[ 51.149089] x3 : 0000000000000027 x2 : 0000000000000000
[ 51.149101] x1 : 0000000000000000 x0 : ffff0000049ae040
[ 51.149114] Call trace:
[ 51.149120] dwc3_send_gadget_ep_cmd+0x570/0x740 [dwc3]
[ 51.149150] __dwc3_gadget_ep_enable+0x288/0x4fc [dwc3]
[ 51.149179] dwc3_gadget_ep_enable+0x6c/0x15c [dwc3]
[ 51.149209] usb_ep_enable+0x48/0x110 [udc_core]
[ 51.149251] rndis_set_alt+0x138/0x1c0 [usb_f_rndis]
[ 51.149276] composite_setup+0x674/0x194c [libcomposite]
[ 51.149314] dwc3_ep0_interrupt+0x9c4/0xb9c [dwc3]
[ 51.149344] dwc3_thread_interrupt+0x8bc/0xe74 [dwc3]
[ 51.149374] irq_thread_fn+0x38/0xb0
[ 51.149388] irq_thread+0x170/0x294
[ 51.149397] kthread+0x164/0x16c
[ 51.149407] ret_from_fork+0x10/0x34
[ 51.149419] ---[ end trace 62c6cc2ebfb18047 ]---
Linus' tree isn't affected. Revert the change.
Signed-off-by: Martin Kepplinger <[email protected]>
---
drivers/usb/dwc3/gadget.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 2a86ad4b12b3..ef8ecaf8655a 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -783,6 +783,8 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
trace_dwc3_gadget_ep_disable(dep);
+ dwc3_remove_requests(dwc, dep);
+
/* make sure HW endpoint isn't stalled */
if (dep->flags & DWC3_EP_STALL)
__dwc3_gadget_ep_set_halt(dep, 0, false);
@@ -801,8 +803,6 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
dep->endpoint.desc = NULL;
}
- dwc3_remove_requests(dwc, dep);
-
return 0;
}
@@ -1617,7 +1617,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
{
struct dwc3 *dwc = dep->dwc;
- if (!dep->endpoint.desc || !dwc->pullups_connected || !dwc->connected) {
+ if (!dep->endpoint.desc || !dwc->pullups_connected) {
dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n",
dep->name);
return -ESHUTDOWN;
@@ -2150,7 +2150,6 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
if (!is_on) {
u32 count;
- dwc->connected = false;
/*
* In the Synopsis DesignWare Cores USB3 Databook Rev. 3.30a
* Section 4.1.8 Table 4-7, it states that for a device-initiated
@@ -2175,6 +2174,7 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
dwc->ev_buf->lpos = (dwc->ev_buf->lpos + count) %
dwc->ev_buf->length;
}
+ dwc->connected = false;
} else {
__dwc3_gadget_start(dwc);
}
@@ -3267,6 +3267,8 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
{
u32 reg;
+ dwc->connected = true;
+
/*
* WORKAROUND: DWC3 revisions <1.88a have an issue which
* would cause a missing Disconnect Event if there's a
@@ -3306,7 +3308,6 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
* transfers."
*/
dwc3_stop_active_transfers(dwc);
- dwc->connected = true;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
reg &= ~DWC3_DCTL_TSTCTRL_MASK;
--
2.30.2