From: Nicolas Ferre <[email protected]>
Add unit address to the ETB and ETM nodes.
It also allow us to get rid of the warnings:
../arch/arm/boot/dts/sama5d2.dtsi:43.6-57.4: Warning
(unit_address_vs_reg): /etb: node has a reg or ranges property, but no
unit name
../arch/arm/boot/dts/sama5d2.dtsi:59.6-73.4: Warning
(unit_address_vs_reg): /etm: node has a reg or ranges property, but no
unit name
when we compile with W=1.
Signed-off-by: Nicolas Ferre <[email protected]>
---
arch/arm/boot/dts/sama5d2.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 2c4952427296..a27294394508 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -40,7 +40,7 @@ pmu {
interrupts = <2 IRQ_TYPE_LEVEL_HIGH 0>;
};
- etb {
+ etb@740000 {
compatible = "arm,coresight-etb10", "arm,primecell";
reg = <0x740000 0x1000>;
@@ -56,7 +56,7 @@ etb_in: endpoint {
};
};
- etm {
+ etm@73C000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0x73C000 0x1000>;
--
2.31.1