From: Stefan Riedmueller <[email protected]>
[ Upstream commit f57011e72f5fe0421ec7a812beb1b57bdf4bb47f ]
Setting the vmmc supplies is crucial since otherwise the supplying
regulators get disabled and the SD interfaces are no longer powered
which leads to system failures if the system is booted from that SD
interface.
Fixes: 1e44d3f880d5 ("ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module")
Signed-off-by: Stefan Riedmueller <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 7a1e53195785..f28a96fcf23e 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -433,6 +433,7 @@
pinctrl-0 = <&pinctrl_usdhc2>;
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ vmmc-supply = <&vdd_sd1_reg>;
status = "disabled";
};
@@ -442,5 +443,6 @@
&pinctrl_usdhc3_cdwp>;
cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ vmmc-supply = <&vdd_sd0_reg>;
status = "disabled";
};
--
2.30.2