The brcm,sd-head-align, brcm,sd_head_align and brcm,sd_sgentry_align are
not used by the driver and not present in dtschema:
arch/arm/boot/dts/am5729-beagleboneai.dt.yaml: wifi@1:
'brcm,sd-head-align', 'brcm,sd_head_align', 'brcm,sd_sgentry_align' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/am5729-beagleboneai.dts | 4 ----
1 file changed, 4 deletions(-)
diff --git a/arch/arm/boot/dts/am5729-beagleboneai.dts b/arch/arm/boot/dts/am5729-beagleboneai.dts
index 149cfafb90bf..d3b2e87a6266 100644
--- a/arch/arm/boot/dts/am5729-beagleboneai.dts
+++ b/arch/arm/boot/dts/am5729-beagleboneai.dts
@@ -582,10 +582,6 @@ brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
- brcm,sd-head-align = <4>;
- brcm,sd_head_align = <4>;
- brcm,sd_sgentry_align = <512>;
-
interrupt-parent = <&gpio3>;
interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "host-wake";
--
2.25.1
On Wed, May 5, 2021 at 9:04 AM Krzysztof Kozlowski
<[email protected]> wrote:
>
> The brcm,sd-head-align, brcm,sd_head_align and brcm,sd_sgentry_align are
> not used by the driver and not present in dtschema:
>
> arch/arm/boot/dts/am5729-beagleboneai.dt.yaml: wifi@1:
> 'brcm,sd-head-align', 'brcm,sd_head_align', 'brcm,sd_sgentry_align' do not match any of the regexes: 'pinctrl-[0-9]+'
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
> arch/arm/boot/dts/am5729-beagleboneai.dts | 4 ----
> 1 file changed, 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am5729-beagleboneai.dts b/arch/arm/boot/dts/am5729-beagleboneai.dts
> index 149cfafb90bf..d3b2e87a6266 100644
> --- a/arch/arm/boot/dts/am5729-beagleboneai.dts
> +++ b/arch/arm/boot/dts/am5729-beagleboneai.dts
> @@ -582,10 +582,6 @@ brcmf: wifi@1 {
> reg = <1>;
> compatible = "brcm,bcm4329-fmac";
>
> - brcm,sd-head-align = <4>;
> - brcm,sd_head_align = <4>;
> - brcm,sd_sgentry_align = <512>;
> -
> interrupt-parent = <&gpio3>;
> interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
> interrupt-names = "host-wake";
> --
> 2.25.1
>
NAK, for what it is worth..
This is a plain old shitty situation, that everyone that mistakenly
chooses a BRCM based chipset in a design faces, then learns to NEVER
touch that chipset again..
These nodes have been posted before for mainline inclusion but always
get killed off:
https://lkml.org/lkml/2018/3/18/356
The TI AM57xx SDIO needs these flags for the brcmfmac driver to actually work.
I don't see the brcmfmac developers actually fixing it, as "out of
tree" work for brcmfmac is 100+ patches long:
https://www.cypress.com/documentation/software-and-drivers-archive/wifi-bt-linux-archive?source=search&cat=other
Regards,
--
Robert Nelson
https://rcn-ee.com/