2021-05-11 04:39:38

by Oleksij Rempel

Subject: [PATCH v3 2/7] ARM i.MX6q: remove part of ar8031_phy_fixup()

This part of this fixup is overwritten by at803x_config_init() in
drivers/net/phy/at803x.c. No additional devicetree fixes are needed.

Signed-off-by: Oleksij Rempel <[email protected]>
---
arch/arm/mach-imx/mach-imx6q.c | 6 ------
1 file changed, 6 deletions(-)

diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 78205f90da27..1abefe7e1c3a 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -82,12 +82,6 @@ static int ar8031_phy_fixup(struct phy_device *dev)
val |= 0x18;
phy_write(dev, 0xe, val);

- /* introduce tx clock delay */
- phy_write(dev, 0x1d, 0x5);
- val = phy_read(dev, 0x1e);
- val |= 0x0100;
- phy_write(dev, 0x1e, val);
-
return 0;
}

--
2.29.2

2021-05-11 12:54:16

by Andrew Lunn

Subject: Re: [PATCH v3 2/7] ARM i.MX6q: remove part of ar8031_phy_fixup()

On Tue, May 11, 2021 at 06:37:30AM +0200, Oleksij Rempel wrote:
> This part of this fixup is overwritten by at803x_config_init() in
> drivers/net/phy/at803x.c. No additional devicetree fixes are needed.
>
> Signed-off-by: Oleksij Rempel <[email protected]>

Reviewed-by: Andrew Lunn <[email protected]>

Andrew