The i.MX8MQ SoC integrates a different MIPI CSI receiver as the i.MX8MM so
describe the DT bindings for it.
Signed-off-by: Martin Kepplinger <[email protected]>
---
.../bindings/media/nxp,imx8mq-mipi-csi2.yaml | 161 ++++++++++++++++++
1 file changed, 161 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
new file mode 100644
index 000000000000..6eafdf803d36
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx8mq-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MQ MIPI CSI-2 receiver
+
+maintainers:
+ - Martin Kepplinger <[email protected]>
+
+description: |-
+ This binding covers the CSI-2 RX PHY and host controller included in the
+ NXP i.MX8MQ SoC. It handles the sensor/image input and process for all the
+ input imaging devices.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8mq-mipi-csi2
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: core is the RX Controller Core Clock input. This clock
+ must be exactly equal to or faster than the receive
+ byteclock from the RX DPHY.
+ - description: esc is the Rx Escape Clock. This must be the same escape
+ clock that the RX DPHY receives.
+ - description: pxl is the pixel clock (phy_ref up to 333Mhz).
+ - description: clko2 is the CLKO2 clock root.
+ See the reference manual for details.
+
+ clock-names:
+ items:
+ - const: core
+ - const: esc
+ - const: pxl
+ - const: clko2
+
+ power-domains:
+ maxItems: 1
+
+ reset:
+ description:
+ The phandle to the imx8mq reset-controller.
+ maxItems: 1
+
+ phy:
+ description:
+ The phandle to the imx8mq syscon iomux-gpr.
+ maxItems: 1
+
+ interconnects:
+ maxItems: 1
+
+ interconnect-names:
+ const: dram
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port node, single endpoint describing the CSI-2 transmitter.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ items:
+ minItems: 1
+ maxItems: 4
+ items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ required:
+ - data-lanes
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Output port node
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - power-domains
+ - reset
+ - phy
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mq-clock.h>
+ #include <dt-bindings/interconnect/imx8mq.h>
+
+ csi@30a70000 {
+ compatible = "fsl,imx8mq-mipi-csi2";
+ reg = <0x30a70000 0x1000>;
+ clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+ <&clk IMX8MQ_CLK_CSI1_ESC>,
+ <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
+ <&clk IMX8MQ_CLK_CLKO2>;
+ clock-names = "core", "esc", "pxl", "clko2";
+ assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+ <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
+ <&clk IMX8MQ_CLK_CSI1_ESC>;
+ assigned-clock-rates = <266000000>, <200000000>, <66000000>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+ <&clk IMX8MQ_SYS2_PLL_1000M>,
+ <&clk IMX8MQ_SYS1_PLL_800M>;
+ power-domains = <&pgc_mipi_csi1>;
+ reset = <&src>;
+ phy = <&iomuxc_gpr>;
+ interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
+ interconnect-names = "dram";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ imx8mm_mipi_csi_in: endpoint {
+ remote-endpoint = <&imx477_out>;
+ data-lanes = <1 2 3 4>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ imx8mm_mipi_csi_out: endpoint {
+ remote-endpoint = <&csi_in>;
+ };
+ };
+ };
+ };
+
+...
--
2.30.2
On Tue, Jun 08, 2021 at 12:41:26PM +0200, Martin Kepplinger wrote:
> The i.MX8MQ SoC integrates a different MIPI CSI receiver as the i.MX8MM so
> describe the DT bindings for it.
>
> Signed-off-by: Martin Kepplinger <[email protected]>
> ---
> .../bindings/media/nxp,imx8mq-mipi-csi2.yaml | 161 ++++++++++++++++++
> 1 file changed, 161 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> new file mode 100644
> index 000000000000..6eafdf803d36
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> @@ -0,0 +1,161 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/nxp,imx8mq-mipi-csi2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP i.MX8MQ MIPI CSI-2 receiver
> +
> +maintainers:
> + - Martin Kepplinger <[email protected]>
> +
> +description: |-
> + This binding covers the CSI-2 RX PHY and host controller included in the
> + NXP i.MX8MQ SoC. It handles the sensor/image input and process for all the
> + input imaging devices.
> +
> +properties:
> + compatible:
> + enum:
> + - fsl,imx8mq-mipi-csi2
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: core is the RX Controller Core Clock input. This clock
> + must be exactly equal to or faster than the receive
> + byteclock from the RX DPHY.
> + - description: esc is the Rx Escape Clock. This must be the same escape
> + clock that the RX DPHY receives.
> + - description: pxl is the pixel clock (phy_ref up to 333Mhz).
> + - description: clko2 is the CLKO2 clock root.
> + See the reference manual for details.
> +
> + clock-names:
> + items:
> + - const: core
> + - const: esc
> + - const: pxl
> + - const: clko2
> +
> + power-domains:
> + maxItems: 1
> +
> + reset:
resets
> + description:
> + The phandle to the imx8mq reset-controller.
Drop. What the reset controller is is out of scope for a binding.
> + maxItems: 1
> +
> + phy:
phys? Assuming this is using the PHY binding. If it is not, then why
not?
> + description:
> + The phandle to the imx8mq syscon iomux-gpr.
> + maxItems: 1
> +
> + interconnects:
> + maxItems: 1
> +
> + interconnect-names:
> + const: dram
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port node, single endpoint describing the CSI-2 transmitter.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + items:
> + minItems: 1
> + maxItems: 4
> + items:
> + - const: 1
> + - const: 2
> + - const: 3
> + - const: 4
> +
> + required:
> + - data-lanes
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + Output port node
> +
> + required:
> + - port@0
> + - port@1
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - power-domains
> + - reset
> + - phy
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/imx8mq-clock.h>
> + #include <dt-bindings/interconnect/imx8mq.h>
> +
> + csi@30a70000 {
> + compatible = "fsl,imx8mq-mipi-csi2";
> + reg = <0x30a70000 0x1000>;
> + clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
> + <&clk IMX8MQ_CLK_CSI1_ESC>,
> + <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
> + <&clk IMX8MQ_CLK_CLKO2>;
> + clock-names = "core", "esc", "pxl", "clko2";
> + assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
> + <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
> + <&clk IMX8MQ_CLK_CSI1_ESC>;
> + assigned-clock-rates = <266000000>, <200000000>, <66000000>;
> + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
> + <&clk IMX8MQ_SYS2_PLL_1000M>,
> + <&clk IMX8MQ_SYS1_PLL_800M>;
> + power-domains = <&pgc_mipi_csi1>;
> + reset = <&src>;
> + phy = <&iomuxc_gpr>;
> + interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
> + interconnect-names = "dram";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + imx8mm_mipi_csi_in: endpoint {
> + remote-endpoint = <&imx477_out>;
> + data-lanes = <1 2 3 4>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + imx8mm_mipi_csi_out: endpoint {
> + remote-endpoint = <&csi_in>;
> + };
> + };
> + };
> + };
> +
> +...
> --
> 2.30.2