2021-06-11 10:16:31

by Martin Kepplinger

[permalink] [raw]
Subject: [PATCH v5 0/5] Add support for the Hynix Hi-846 camera

hi,

This patchset adds support for the SK Hynix Hi-846 CMOS images sensor.
It includes dt-bindings and the driver.

Patches 4 and 5 are basically optional: if i2c-cardlist is deprecated,
ignore it and act on it appropriately, and the arm64 defconfig is just
convenience for now.

best wishes,

martin

revision history
----------------
v5: (thank you Laurent and Rob)
* minor dt-bindings fixes
* driver: disable lens shading correcting (no seed values yet used from "otp" for that)
* add reviewed-tags

v4: (thank you Laurent, Sakari and Rob) many driver changes, see v3 review for
details. they include:
* add get_selection(), remove open() callback
* use gpiod API
* use regulator_bulk API
* fix power supply timing sequence and bindings
* https://lore.kernel.org/linux-media/[email protected]/

v3: (thank you, Laurent)
* use do_div() for divisions
* reset-gpios DT property name instead of rst-gpios
* improve the dt-bindings
* add the phone-devel list
* https://lore.kernel.org/linux-media/[email protected]/

v2:
sent a bit early due to stupid mistakes
* fix build issues
* fix dtschema issues
* add enable for arm64 defconfig
* https://lore.kernel.org/linux-media/[email protected]/T/#t

v1:
* https://lore.kernel.org/linux-media/[email protected]/


Martin Kepplinger (5):
dt-bindings: vendor-prefixes: Add SK Hynix Inc.
dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel
sensor
media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera
arm64: defconfig: enable VIDEO_HI846
Documentation: i2c-cardlist: add the Hynix hi846 sensor

.../admin-guide/media/i2c-cardlist.rst | 1 +
.../bindings/media/i2c/hynix,hi846.yaml | 108 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 6 +
arch/arm64/configs/defconfig | 1 +
drivers/media/i2c/Kconfig | 13 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/hi846.c | 2117 +++++++++++++++++
8 files changed, 2249 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
create mode 100644 drivers/media/i2c/hi846.c

--
2.30.2


2021-06-11 10:16:57

by Martin Kepplinger

[permalink] [raw]
Subject: [PATCH v5 2/5] dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor

Document the bindings used for the SK Hynix Hi-846 CMOS camera driver.

Signed-off-by: Martin Kepplinger <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
.../bindings/media/i2c/hynix,hi846.yaml | 108 ++++++++++++++++++
1 file changed, 108 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
new file mode 100644
index 000000000000..8ca038b8d388
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/hynix,hi846.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SK Hynix Hi-846 1/4" 8M Pixel MIPI CSI-2 sensor
+
+maintainers:
+ - Martin Kepplinger <[email protected]>
+
+description: |-
+ The Hi-846 is a raw image sensor with an MIPI CSI-2 image data
+ interface and CCI (I2C compatible) control bus. The output format
+ is raw Bayer.
+
+properties:
+ compatible:
+ const: hynix,hi846
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Reference to the mclk clock.
+
+ reset-gpios:
+ description: Reference to the GPIO connected to the RESETB pin. Active low.
+ maxItems: 1
+
+ shutdown-gpios:
+ description: Reference to the GPIO connected to the XSHUTDOWN pin. Active low.
+ maxItems: 1
+
+ vddio-supply:
+ description: Definition of the regulator used for the VDDIO power supply.
+
+ vdda-supply:
+ description: Definition of the regulator used for the VDDA power supply.
+
+ vddd-supply:
+ description: Definition of the regulator used for the VDDD power supply.
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ oneOf:
+ - items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+ - items:
+ - const: 1
+ - const: 2
+
+ required:
+ - data-lanes
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - vddio-supply
+ - vdda-supply
+ - vddd-supply
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hi846: camera@20 {
+ compatible = "hynix,hi846";
+ reg = <0x20>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_csi1>;
+ clocks = <&clk>;
+ vdda-supply = <&reg_camera_vdda>;
+ vddd-supply = <&reg_camera_vddd>;
+ vddio-supply = <&reg_camera_vddio>;
+ reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
+
+ port {
+ camera_out: endpoint {
+ remote-endpoint = <&csi1_ep1>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+ };
+
+...
--
2.30.2

2021-06-11 10:17:04

by Martin Kepplinger

[permalink] [raw]
Subject: [PATCH v5 5/5] Documentation: i2c-cardlist: add the Hynix hi846 sensor

Add the SK Hynix Hi-846 8M Pixel CMOS image sensor to the i2c-cardlist.

Signed-off-by: Martin Kepplinger <[email protected]>
---
Documentation/admin-guide/media/i2c-cardlist.rst | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/admin-guide/media/i2c-cardlist.rst b/Documentation/admin-guide/media/i2c-cardlist.rst
index e60d459d18a9..185e07a3da43 100644
--- a/Documentation/admin-guide/media/i2c-cardlist.rst
+++ b/Documentation/admin-guide/media/i2c-cardlist.rst
@@ -60,6 +60,7 @@ Driver Name
============ ==========================================================
et8ek8 ET8EK8 camera sensor
hi556 Hynix Hi-556 sensor
+hi846 Hynix Hi-846 sensor
imx214 Sony IMX214 sensor
imx219 Sony IMX219 sensor
imx258 Sony IMX258 sensor
--
2.30.2

2021-06-11 10:17:24

by Martin Kepplinger

[permalink] [raw]
Subject: [PATCH v5 3/5] media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera

The SK Hynix Hi-846 is a 1/4" 8M Pixel CMOS Image Sensor. It supports
usual features like I2C control, CSI-2 for frame data, digital/analog
gain control or test patterns.

This driver supports the 640x480, 1280x720 and 1632x1224 resolution
modes. It supports runtime PM in order not to draw any unnecessary power.

The part is also called YACG4D0C9SHC and a datasheet can be found at
https://product.skhynix.com/products/cis/cis.go

The large sets of partly undocumented register values are for example
found when searching for the hi846_mipi_raw_Sensor.c Android driver.

Signed-off-by: Martin Kepplinger <[email protected]>
---
MAINTAINERS | 6 +
drivers/media/i2c/Kconfig | 13 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/hi846.c | 2117 ++++++++++++++++++++++++++++++++++++
4 files changed, 2137 insertions(+)
create mode 100644 drivers/media/i2c/hi846.c

diff --git a/MAINTAINERS b/MAINTAINERS
index cff342847673..1f86ca1fb242 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8523,6 +8523,12 @@ S: Maintained
T: git git://linuxtv.org/media_tree.git
F: drivers/media/i2c/hi556.c

+HYNIX HI846 SENSOR DRIVER
+M: Martin Kepplinger <[email protected]>
+L: [email protected]
+S: Maintained
+F: drivers/media/i2c/hi846.c
+
Hyper-V/Azure CORE AND DRIVERS
M: "K. Y. Srinivasan" <[email protected]>
M: Haiyang Zhang <[email protected]>
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 588f8eb95984..5b020d05960c 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -753,6 +753,19 @@ config VIDEO_IMX208
To compile this driver as a module, choose M here: the
module will be called imx208.

+config VIDEO_HI846
+ tristate "Hynix Hi-846 sensor support"
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the Hynix
+ Hi-846 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hi846.
+
config VIDEO_IMX214
tristate "Sony IMX214 sensor support"
depends on GPIOLIB && I2C && VIDEO_V4L2
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index 1168fa6b84ed..303cd7bc4e66 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -116,6 +116,7 @@ obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o
obj-$(CONFIG_VIDEO_OV2659) += ov2659.o
obj-$(CONFIG_VIDEO_TC358743) += tc358743.o
obj-$(CONFIG_VIDEO_HI556) += hi556.o
+obj-$(CONFIG_VIDEO_HI846) += hi846.o
obj-$(CONFIG_VIDEO_IMX208) += imx208.o
obj-$(CONFIG_VIDEO_IMX214) += imx214.o
obj-$(CONFIG_VIDEO_IMX219) += imx219.o
diff --git a/drivers/media/i2c/hi846.c b/drivers/media/i2c/hi846.c
new file mode 100644
index 000000000000..c894484c92cf
--- /dev/null
+++ b/drivers/media/i2c/hi846.c
@@ -0,0 +1,2117 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Purism SPC
+
+#include <asm/unaligned.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_graph.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm.h>
+#include <linux/regulator/consumer.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
+
+#define HI846_MEDIA_BUS_FORMAT MEDIA_BUS_FMT_SGBRG10_1X10
+#define HI846_RGB_DEPTH 10
+
+/* Frame length lines / Vertical timings */
+#define HI846_REG_FLL 0x0006
+#define HI846_FLL_MAX 0xffff
+
+/* Horizontal timing */
+#define HI846_REG_LLP 0x0008
+#define HI846_LINE_LENGTH 3800
+
+#define HI846_REG_BINNING_MODE 0x000c
+
+#define HI846_REG_IMAGE_ORIENTATION 0x000e
+
+#define HI846_REG_UNKNOWN_0022 0x0022
+
+#define HI846_REG_Y_ADDR_START_VACT_H 0x0026
+#define HI846_REG_Y_ADDR_START_VACT_L 0x0027
+#define HI846_REG_UNKNOWN_0028 0x0028
+
+#define HI846_REG_Y_ADDR_END_VACT_H 0x002c
+#define HI846_REG_Y_ADDR_END_VACT_L 0x002d
+
+#define HI846_REG_Y_ODD_INC_FOBP 0x002e
+#define HI846_REG_Y_EVEN_INC_FOBP 0x002f
+
+#define HI846_REG_Y_ODD_INC_VACT 0x0032
+#define HI846_REG_Y_EVEN_INC_VACT 0x0033
+
+#define HI846_REG_GROUPED_PARA_HOLD 0x0046
+
+#define HI846_REG_TG_ENABLE 0x004c
+
+#define HI846_REG_UNKNOWN_005C 0x005c
+
+#define HI846_REG_UNKNOWN_006A 0x006a
+
+/*
+ * Long exposure time. Actually, exposure is a 20 bit value that
+ * includes the lower 4 bits of 0x0073 too. only 16 bit are used
+ * right now
+ */
+#define HI846_REG_EXPOSURE 0x0074
+#define HI846_EXPOSURE_MIN 6
+#define HI846_EXPOSURE_MAX_MARGIN 2
+#define HI846_EXPOSURE_STEP 1
+
+/* Analog gain controls from sensor */
+#define HI846_REG_ANALOG_GAIN 0x0077
+#define HI846_ANAL_GAIN_MIN 0
+#define HI846_ANAL_GAIN_MAX 240
+#define HI846_ANAL_GAIN_STEP 8
+
+/* Digital gain controls from sensor */
+#define HI846_REG_MWB_GR_GAIN_H 0x0078
+#define HI846_REG_MWB_GR_GAIN_L 0x0079
+#define HI846_REG_MWB_GB_GAIN_H 0x007a
+#define HI846_REG_MWB_GB_GAIN_L 0x007b
+#define HI846_REG_MWB_R_GAIN_H 0x007c
+#define HI846_REG_MWB_R_GAIN_L 0x007d
+#define HI846_REG_MWB_B_GAIN_H 0x007e
+#define HI846_REG_MWB_B_GAIN_L 0x007f
+#define HI846_DGTL_GAIN_MIN 0
+#define HI846_DGTL_GAIN_MAX 8191
+#define HI846_DGTL_GAIN_STEP 1
+#define HI846_DGTL_GAIN_DEFAULT 256
+
+#define HI846_REG_X_ADDR_START_HACT_H 0x0120
+#define HI846_REG_X_ADDR_END_HACT_H 0x0122
+
+#define HI846_REG_UNKNOWN_012A 0x012a
+
+#define HI846_REG_UNKNOWN_0200 0x0200
+
+#define HI846_REG_UNKNOWN_021C 0x021c
+#define HI846_REG_UNKNOWN_021E 0x021e
+
+#define HI846_REG_UNKNOWN_0402 0x0402
+#define HI846_REG_UNKNOWN_0404 0x0404
+#define HI846_REG_UNKNOWN_0408 0x0408
+#define HI846_REG_UNKNOWN_0410 0x0410
+#define HI846_REG_UNKNOWN_0412 0x0412
+#define HI846_REG_UNKNOWN_0414 0x0414
+
+#define HI846_REG_UNKNOWN_0418 0x0418
+
+#define HI846_REG_UNKNOWN_051E 0x051e
+
+/* Formatter */
+#define HI846_REG_X_START_H 0x0804
+#define HI846_REG_X_START_L 0x0805
+
+/* MIPI */
+#define HI846_REG_UNKNOWN_0900 0x0900
+#define HI846_REG_MIPI_TX_OP_EN 0x0901
+#define HI846_REG_MIPI_TX_OP_MODE 0x0902
+#define HI846_RAW8 BIT(5)
+
+#define HI846_REG_UNKNOWN_090C 0x090c
+#define HI846_REG_UNKNOWN_090E 0x090e
+
+#define HI846_REG_UNKNOWN_0914 0x0914
+#define HI846_REG_TLPX 0x0915
+#define HI846_REG_TCLK_PREPARE 0x0916
+#define HI846_REG_TCLK_ZERO 0x0917
+#define HI846_REG_UNKNOWN_0918 0x0918
+#define HI846_REG_THS_PREPARE 0x0919
+#define HI846_REG_THS_ZERO 0x091a
+#define HI846_REG_THS_TRAIL 0x091b
+#define HI846_REG_TCLK_POST 0x091c
+#define HI846_REG_TCLK_TRAIL_MIN 0x091d
+#define HI846_REG_UNKNOWN_091E 0x091e
+
+#define HI846_REG_UNKNOWN_0954 0x0954
+#define HI846_REG_UNKNOWN_0956 0x0956
+#define HI846_REG_UNKNOWN_0958 0x0958
+#define HI846_REG_UNKNOWN_095A 0x095a
+
+/* ISP Common */
+#define HI846_REG_MODE_SELECT 0x0a00
+#define HI846_MODE_STANDBY 0x00
+#define HI846_MODE_STREAMING 0x01
+#define HI846_REG_FAST_STANDBY_MODE 0x0a02
+#define HI846_REG_ISP_EN_H 0x0a04
+
+/* Test Pattern Control */
+#define HI846_REG_ISP 0x0a05
+#define HI846_REG_ISP_TPG_EN 0x01
+#define HI846_REG_TEST_PATTERN 0x020a /* 1-9 */
+
+#define HI846_REG_UNKNOWN_0A0C 0x0a0c
+
+/* Windowing */
+#define HI846_REG_X_OUTPUT_SIZE_H 0x0a12
+#define HI846_REG_X_OUTPUT_SIZE_L 0x0a13
+#define HI846_REG_Y_OUTPUT_SIZE_H 0x0a14
+#define HI846_REG_Y_OUTPUT_SIZE_L 0x0a15
+
+/* ISP Common */
+#define HI846_REG_PEDESTAL_EN 0x0a1a
+
+#define HI846_REG_UNKNOWN_0A1E 0x0a1e
+
+/* Horizontal Binning Mode */
+#define HI846_REG_HBIN_MODE 0x0a22
+
+#define HI846_REG_UNKNOWN_0A24 0x0a24
+#define HI846_REG_UNKNOWN_0B02 0x0b02
+#define HI846_REG_UNKNOWN_0B10 0x0b10
+#define HI846_REG_UNKNOWN_0B12 0x0b12
+#define HI846_REG_UNKNOWN_0B14 0x0b14
+
+/* BLC (Black Level Calibration) */
+#define HI846_REG_BLC_CTL0 0x0c00
+
+#define HI846_REG_UNKNOWN_0C06 0x0c06
+#define HI846_REG_UNKNOWN_0C10 0x0c10
+#define HI846_REG_UNKNOWN_0C12 0x0c12
+#define HI846_REG_UNKNOWN_0C14 0x0c14
+#define HI846_REG_UNKNOWN_0C16 0x0c16
+
+#define HI846_REG_UNKNOWN_0E04 0x0e04
+
+#define HI846_REG_CHIP_ID_L 0x0f16
+#define HI846_REG_CHIP_ID_H 0x0f17
+#define HI846_CHIP_ID_L 0x46
+#define HI846_CHIP_ID_H 0x08
+
+#define HI846_REG_UNKNOWN_0F04 0x0f04
+#define HI846_REG_UNKNOWN_0F08 0x0f08
+
+/* PLL */
+#define HI846_REG_PLL_CFG_MIPI2_H 0x0f2a
+#define HI846_REG_PLL_CFG_MIPI2_L 0x0f2b
+
+#define HI846_REG_UNKNOWN_0F30 0x0f30
+#define HI846_REG_PLL_CFG_RAMP1_H 0x0f32
+#define HI846_REG_UNKNOWN_0F36 0x0f36
+#define HI846_REG_PLL_CFG_MIPI1_H 0x0f38
+
+#define HI846_REG_UNKNOWN_2008 0x2008
+#define HI846_REG_UNKNOWN_326E 0x326e
+
+struct hi846_reg {
+ u16 address;
+ u16 val;
+};
+
+struct hi846_reg_list {
+ u32 num_of_regs;
+ const struct hi846_reg *regs;
+};
+
+struct hi846_mode {
+ /* Frame width in pixels */
+ u32 width;
+
+ /* Frame height in pixels */
+ u32 height;
+
+ /* Horizontal timing size */
+ u32 llp;
+
+ /* Link frequency needed for this resolution */
+ u8 link_freq_index;
+
+ u16 fps;
+
+ /* vertical timining size */
+ u16 frame_len;
+
+ const struct hi846_reg_list reg_list_config;
+ const struct hi846_reg_list reg_list_2lane;
+ const struct hi846_reg_list reg_list_4lane;
+
+ /* position inside of the 3264x2448 pixel array */
+ struct v4l2_rect crop;
+};
+
+static const struct hi846_reg hi846_init_2lane[] = {
+ {HI846_REG_MODE_SELECT, 0x0000},
+ /* regs below are unknown */
+ {0x2000, 0x100a},
+ {0x2002, 0x00ff},
+ {0x2004, 0x0007},
+ {0x2006, 0x3fff},
+ {0x2008, 0x3fff},
+ {0x200a, 0xc216},
+ {0x200c, 0x1292},
+ {0x200e, 0xc01a},
+ {0x2010, 0x403d},
+ {0x2012, 0x000e},
+ {0x2014, 0x403e},
+ {0x2016, 0x0b80},
+ {0x2018, 0x403f},
+ {0x201a, 0x82ae},
+ {0x201c, 0x1292},
+ {0x201e, 0xc00c},
+ {0x2020, 0x4130},
+ {0x2022, 0x43e2},
+ {0x2024, 0x0180},
+ {0x2026, 0x4130},
+ {0x2028, 0x7400},
+ {0x202a, 0x5000},
+ {0x202c, 0x0253},
+ {0x202e, 0x0ad1},
+ {0x2030, 0x2360},
+ {0x2032, 0x0009},
+ {0x2034, 0x5020},
+ {0x2036, 0x000b},
+ {0x2038, 0x0002},
+ {0x203a, 0x0044},
+ {0x203c, 0x0016},
+ {0x203e, 0x1792},
+ {0x2040, 0x7002},
+ {0x2042, 0x154f},
+ {0x2044, 0x00d5},
+ {0x2046, 0x000b},
+ {0x2048, 0x0019},
+ {0x204a, 0x1698},
+ {0x204c, 0x000e},
+ {0x204e, 0x099a},
+ {0x2050, 0x0058},
+ {0x2052, 0x7000},
+ {0x2054, 0x1799},
+ {0x2056, 0x0310},
+ {0x2058, 0x03c3},
+ {0x205a, 0x004c},
+ {0x205c, 0x064a},
+ {0x205e, 0x0001},
+ {0x2060, 0x0007},
+ {0x2062, 0x0bc7},
+ {0x2064, 0x0055},
+ {0x2066, 0x7000},
+ {0x2068, 0x1550},
+ {0x206a, 0x158a},
+ {0x206c, 0x0004},
+ {0x206e, 0x1488},
+ {0x2070, 0x7010},
+ {0x2072, 0x1508},
+ {0x2074, 0x0004},
+ {0x2076, 0x0016},
+ {0x2078, 0x03d5},
+ {0x207a, 0x0055},
+ {0x207c, 0x08ca},
+ {0x207e, 0x2019},
+ {0x2080, 0x0007},
+ {0x2082, 0x7057},
+ {0x2084, 0x0fc7},
+ {0x2086, 0x5041},
+ {0x2088, 0x12c8},
+ {0x208a, 0x5060},
+ {0x208c, 0x5080},
+ {0x208e, 0x2084},
+ {0x2090, 0x12c8},
+ {0x2092, 0x7800},
+ {0x2094, 0x0802},
+ {0x2096, 0x040f},
+ {0x2098, 0x1007},
+ {0x209a, 0x0803},
+ {0x209c, 0x080b},
+ {0x209e, 0x3803},
+ {0x20a0, 0x0807},
+ {0x20a2, 0x0404},
+ {0x20a4, 0x0400},
+ {0x20a6, 0xffff},
+ {0x20a8, 0xf0b2},
+ {0x20aa, 0xffef},
+ {0x20ac, 0x0a84},
+ {0x20ae, 0x1292},
+ {0x20b0, 0xc02e},
+ {0x20b2, 0x4130},
+ {0x23fe, 0xc056},
+ {0x3232, 0xfc0c},
+ {0x3236, 0xfc22},
+ {0x3248, 0xfca8},
+ {0x326a, 0x8302},
+ {0x326c, 0x830a},
+ {0x326e, 0x0000},
+ {0x32ca, 0xfc28},
+ {0x32cc, 0xc3bc},
+ {0x32ce, 0xc34c},
+ {0x32d0, 0xc35a},
+ {0x32d2, 0xc368},
+ {0x32d4, 0xc376},
+ {0x32d6, 0xc3c2},
+ {0x32d8, 0xc3e6},
+ {0x32da, 0x0003},
+ {0x32dc, 0x0003},
+ {0x32de, 0x00c7},
+ {0x32e0, 0x0031},
+ {0x32e2, 0x0031},
+ {0x32e4, 0x0031},
+ {0x32e6, 0xfc28},
+ {0x32e8, 0xc3bc},
+ {0x32ea, 0xc384},
+ {0x32ec, 0xc392},
+ {0x32ee, 0xc3a0},
+ {0x32f0, 0xc3ae},
+ {0x32f2, 0xc3c4},
+ {0x32f4, 0xc3e6},
+ {0x32f6, 0x0003},
+ {0x32f8, 0x0003},
+ {0x32fa, 0x00c7},
+ {0x32fc, 0x0031},
+ {0x32fe, 0x0031},
+ {0x3300, 0x0031},
+ {0x3302, 0x82ca},
+ {0x3304, 0xc164},
+ {0x3306, 0x82e6},
+ {0x3308, 0xc19c},
+ {0x330a, 0x001f},
+ {0x330c, 0x001a},
+ {0x330e, 0x0034},
+ {0x3310, 0x0000},
+ {0x3312, 0x0000},
+ {0x3314, 0xfc94},
+ {0x3316, 0xc3d8},
+ /* regs above are unknown */
+ {HI846_REG_MODE_SELECT, 0x0000},
+ {HI846_REG_UNKNOWN_0E04, 0x0012},
+ {HI846_REG_Y_ODD_INC_FOBP, 0x1111},
+ {HI846_REG_Y_ODD_INC_VACT, 0x1111},
+ {HI846_REG_UNKNOWN_0022, 0x0008},
+ {HI846_REG_Y_ADDR_START_VACT_H, 0x0040},
+ {HI846_REG_UNKNOWN_0028, 0x0017},
+ {HI846_REG_Y_ADDR_END_VACT_H, 0x09cf},
+ {HI846_REG_UNKNOWN_005C, 0x2101},
+ {HI846_REG_FLL, 0x09de},
+ {HI846_REG_LLP, 0x0ed8},
+ {HI846_REG_IMAGE_ORIENTATION, 0x0100},
+ {HI846_REG_BINNING_MODE, 0x0022},
+ {HI846_REG_HBIN_MODE, 0x0000},
+ {HI846_REG_UNKNOWN_0A24, 0x0000},
+ {HI846_REG_X_START_H, 0x0000},
+ {HI846_REG_X_OUTPUT_SIZE_H, 0x0cc0},
+ {HI846_REG_Y_OUTPUT_SIZE_H, 0x0990},
+ {HI846_REG_EXPOSURE, 0x09d8},
+ {HI846_REG_ANALOG_GAIN, 0x0000},
+ {HI846_REG_GROUPED_PARA_HOLD, 0x0000},
+ {HI846_REG_UNKNOWN_051E, 0x0000},
+ {HI846_REG_UNKNOWN_0200, 0x0400},
+ {HI846_REG_PEDESTAL_EN, 0x0c00},
+ {HI846_REG_UNKNOWN_0A0C, 0x0010},
+ {HI846_REG_UNKNOWN_0A1E, 0x0ccf},
+ {HI846_REG_UNKNOWN_0402, 0x0110},
+ {HI846_REG_UNKNOWN_0404, 0x00f4},
+ {HI846_REG_UNKNOWN_0408, 0x0000},
+ {HI846_REG_UNKNOWN_0410, 0x008d},
+ {HI846_REG_UNKNOWN_0412, 0x011a},
+ {HI846_REG_UNKNOWN_0414, 0x864c},
+ {HI846_REG_UNKNOWN_021C, 0x0003},
+ {HI846_REG_UNKNOWN_021E, 0x0235},
+ {HI846_REG_BLC_CTL0, 0x9150},
+ {HI846_REG_UNKNOWN_0C06, 0x0021},
+ {HI846_REG_UNKNOWN_0C10, 0x0040},
+ {HI846_REG_UNKNOWN_0C12, 0x0040},
+ {HI846_REG_UNKNOWN_0C14, 0x0040},
+ {HI846_REG_UNKNOWN_0C16, 0x0040},
+ {HI846_REG_FAST_STANDBY_MODE, 0x0100},
+ {HI846_REG_ISP_EN_H, 0x014a},
+ {HI846_REG_UNKNOWN_0418, 0x0000},
+ {HI846_REG_UNKNOWN_012A, 0x03b4},
+ {HI846_REG_X_ADDR_START_HACT_H, 0x0046},
+ {HI846_REG_X_ADDR_END_HACT_H, 0x0376},
+ {HI846_REG_UNKNOWN_0B02, 0xe04d},
+ {HI846_REG_UNKNOWN_0B10, 0x6821},
+ {HI846_REG_UNKNOWN_0B12, 0x0120},
+ {HI846_REG_UNKNOWN_0B14, 0x0001},
+ {HI846_REG_UNKNOWN_2008, 0x38fd},
+ {HI846_REG_UNKNOWN_326E, 0x0000},
+ {HI846_REG_UNKNOWN_0900, 0x0320},
+ {HI846_REG_MIPI_TX_OP_MODE, 0xc31a},
+ {HI846_REG_UNKNOWN_0914, 0xc109},
+ {HI846_REG_TCLK_PREPARE, 0x061a},
+ {HI846_REG_UNKNOWN_0918, 0x0306},
+ {HI846_REG_THS_ZERO, 0x0b09},
+ {HI846_REG_TCLK_POST, 0x0c07},
+ {HI846_REG_UNKNOWN_091E, 0x0a00},
+ {HI846_REG_UNKNOWN_090C, 0x042a},
+ {HI846_REG_UNKNOWN_090E, 0x006b},
+ {HI846_REG_UNKNOWN_0954, 0x0089},
+ {HI846_REG_UNKNOWN_0956, 0x0000},
+ {HI846_REG_UNKNOWN_0958, 0xca00},
+ {HI846_REG_UNKNOWN_095A, 0x9240},
+ {HI846_REG_UNKNOWN_0F08, 0x2f04},
+ {HI846_REG_UNKNOWN_0F30, 0x001f},
+ {HI846_REG_UNKNOWN_0F36, 0x001f},
+ {HI846_REG_UNKNOWN_0F04, 0x3a00},
+ {HI846_REG_PLL_CFG_RAMP1_H, 0x025a},
+ {HI846_REG_PLL_CFG_MIPI1_H, 0x025a},
+ {HI846_REG_PLL_CFG_MIPI2_H, 0x0024},
+ {HI846_REG_UNKNOWN_006A, 0x0100},
+ {HI846_REG_TG_ENABLE, 0x0100},
+};
+
+static const struct hi846_reg hi846_init_4lane[] = {
+ {0x2000, 0x987a},
+ {0x2002, 0x00ff},
+ {0x2004, 0x0047},
+ {0x2006, 0x3fff},
+ {0x2008, 0x3fff},
+ {0x200a, 0xc216},
+ {0x200c, 0x1292},
+ {0x200e, 0xc01a},
+ {0x2010, 0x403d},
+ {0x2012, 0x000e},
+ {0x2014, 0x403e},
+ {0x2016, 0x0b80},
+ {0x2018, 0x403f},
+ {0x201a, 0x82ae},
+ {0x201c, 0x1292},
+ {0x201e, 0xc00c},
+ {0x2020, 0x4130},
+ {0x2022, 0x43e2},
+ {0x2024, 0x0180},
+ {0x2026, 0x4130},
+ {0x2028, 0x7400},
+ {0x202a, 0x5000},
+ {0x202c, 0x0253},
+ {0x202e, 0x0ad1},
+ {0x2030, 0x2360},
+ {0x2032, 0x0009},
+ {0x2034, 0x5020},
+ {0x2036, 0x000b},
+ {0x2038, 0x0002},
+ {0x203a, 0x0044},
+ {0x203c, 0x0016},
+ {0x203e, 0x1792},
+ {0x2040, 0x7002},
+ {0x2042, 0x154f},
+ {0x2044, 0x00d5},
+ {0x2046, 0x000b},
+ {0x2048, 0x0019},
+ {0x204a, 0x1698},
+ {0x204c, 0x000e},
+ {0x204e, 0x099a},
+ {0x2050, 0x0058},
+ {0x2052, 0x7000},
+ {0x2054, 0x1799},
+ {0x2056, 0x0310},
+ {0x2058, 0x03c3},
+ {0x205a, 0x004c},
+ {0x205c, 0x064a},
+ {0x205e, 0x0001},
+ {0x2060, 0x0007},
+ {0x2062, 0x0bc7},
+ {0x2064, 0x0055},
+ {0x2066, 0x7000},
+ {0x2068, 0x1550},
+ {0x206a, 0x158a},
+ {0x206c, 0x0004},
+ {0x206e, 0x1488},
+ {0x2070, 0x7010},
+ {0x2072, 0x1508},
+ {0x2074, 0x0004},
+ {0x2076, 0x0016},
+ {0x2078, 0x03d5},
+ {0x207a, 0x0055},
+ {0x207c, 0x08ca},
+ {0x207e, 0x2019},
+ {0x2080, 0x0007},
+ {0x2082, 0x7057},
+ {0x2084, 0x0fc7},
+ {0x2086, 0x5041},
+ {0x2088, 0x12c8},
+ {0x208a, 0x5060},
+ {0x208c, 0x5080},
+ {0x208e, 0x2084},
+ {0x2090, 0x12c8},
+ {0x2092, 0x7800},
+ {0x2094, 0x0802},
+ {0x2096, 0x040f},
+ {0x2098, 0x1007},
+ {0x209a, 0x0803},
+ {0x209c, 0x080b},
+ {0x209e, 0x3803},
+ {0x20a0, 0x0807},
+ {0x20a2, 0x0404},
+ {0x20a4, 0x0400},
+ {0x20a6, 0xffff},
+ {0x20a8, 0xf0b2},
+ {0x20aa, 0xffef},
+ {0x20ac, 0x0a84},
+ {0x20ae, 0x1292},
+ {0x20b0, 0xc02e},
+ {0x20b2, 0x4130},
+ {0x20b4, 0xf0b2},
+ {0x20b6, 0xffbf},
+ {0x20b8, 0x2004},
+ {0x20ba, 0x403f},
+ {0x20bc, 0x00c3},
+ {0x20be, 0x4fe2},
+ {0x20c0, 0x8318},
+ {0x20c2, 0x43cf},
+ {0x20c4, 0x0000},
+ {0x20c6, 0x9382},
+ {0x20c8, 0xc314},
+ {0x20ca, 0x2003},
+ {0x20cc, 0x12b0},
+ {0x20ce, 0xcab0},
+ {0x20d0, 0x4130},
+ {0x20d2, 0x12b0},
+ {0x20d4, 0xc90a},
+ {0x20d6, 0x4130},
+ {0x20d8, 0x42d2},
+ {0x20da, 0x8318},
+ {0x20dc, 0x00c3},
+ {0x20de, 0x9382},
+ {0x20e0, 0xc314},
+ {0x20e2, 0x2009},
+ {0x20e4, 0x120b},
+ {0x20e6, 0x120a},
+ {0x20e8, 0x1209},
+ {0x20ea, 0x1208},
+ {0x20ec, 0x1207},
+ {0x20ee, 0x1206},
+ {0x20f0, 0x4030},
+ {0x20f2, 0xc15e},
+ {0x20f4, 0x4130},
+ {0x20f6, 0x1292},
+ {0x20f8, 0xc008},
+ {0x20fa, 0x4130},
+ {0x20fc, 0x42d2},
+ {0x20fe, 0x82a1},
+ {0x2100, 0x00c2},
+ {0x2102, 0x1292},
+ {0x2104, 0xc040},
+ {0x2106, 0x4130},
+ {0x2108, 0x1292},
+ {0x210a, 0xc006},
+ {0x210c, 0x42a2},
+ {0x210e, 0x7324},
+ {0x2110, 0x9382},
+ {0x2112, 0xc314},
+ {0x2114, 0x2011},
+ {0x2116, 0x425f},
+ {0x2118, 0x82a1},
+ {0x211a, 0xf25f},
+ {0x211c, 0x00c1},
+ {0x211e, 0xf35f},
+ {0x2120, 0x2406},
+ {0x2122, 0x425f},
+ {0x2124, 0x00c0},
+ {0x2126, 0xf37f},
+ {0x2128, 0x522f},
+ {0x212a, 0x4f82},
+ {0x212c, 0x7324},
+ {0x212e, 0x425f},
+ {0x2130, 0x82d4},
+ {0x2132, 0xf35f},
+ {0x2134, 0x4fc2},
+ {0x2136, 0x01b3},
+ {0x2138, 0x93c2},
+ {0x213a, 0x829f},
+ {0x213c, 0x2421},
+ {0x213e, 0x403e},
+ {0x2140, 0xfffe},
+ {0x2142, 0x40b2},
+ {0x2144, 0xec78},
+ {0x2146, 0x831c},
+ {0x2148, 0x40b2},
+ {0x214a, 0xec78},
+ {0x214c, 0x831e},
+ {0x214e, 0x40b2},
+ {0x2150, 0xec78},
+ {0x2152, 0x8320},
+ {0x2154, 0xb3d2},
+ {0x2156, 0x008c},
+ {0x2158, 0x2405},
+ {0x215a, 0x4e0f},
+ {0x215c, 0x503f},
+ {0x215e, 0xffd8},
+ {0x2160, 0x4f82},
+ {0x2162, 0x831c},
+ {0x2164, 0x90f2},
+ {0x2166, 0x0003},
+ {0x2168, 0x008c},
+ {0x216a, 0x2401},
+ {0x216c, 0x4130},
+ {0x216e, 0x421f},
+ {0x2170, 0x831c},
+ {0x2172, 0x5e0f},
+ {0x2174, 0x4f82},
+ {0x2176, 0x831e},
+ {0x2178, 0x5e0f},
+ {0x217a, 0x4f82},
+ {0x217c, 0x8320},
+ {0x217e, 0x3ff6},
+ {0x2180, 0x432e},
+ {0x2182, 0x3fdf},
+ {0x2184, 0x421f},
+ {0x2186, 0x7100},
+ {0x2188, 0x4f0e},
+ {0x218a, 0x503e},
+ {0x218c, 0xffd8},
+ {0x218e, 0x4e82},
+ {0x2190, 0x7a04},
+ {0x2192, 0x421e},
+ {0x2194, 0x831c},
+ {0x2196, 0x5f0e},
+ {0x2198, 0x4e82},
+ {0x219a, 0x7a06},
+ {0x219c, 0x0b00},
+ {0x219e, 0x7304},
+ {0x21a0, 0x0050},
+ {0x21a2, 0x40b2},
+ {0x21a4, 0xd081},
+ {0x21a6, 0x0b88},
+ {0x21a8, 0x421e},
+ {0x21aa, 0x831e},
+ {0x21ac, 0x5f0e},
+ {0x21ae, 0x4e82},
+ {0x21b0, 0x7a0e},
+ {0x21b2, 0x521f},
+ {0x21b4, 0x8320},
+ {0x21b6, 0x4f82},
+ {0x21b8, 0x7a10},
+ {0x21ba, 0x0b00},
+ {0x21bc, 0x7304},
+ {0x21be, 0x007a},
+ {0x21c0, 0x40b2},
+ {0x21c2, 0x0081},
+ {0x21c4, 0x0b88},
+ {0x21c6, 0x4392},
+ {0x21c8, 0x7a0a},
+ {0x21ca, 0x0800},
+ {0x21cc, 0x7a0c},
+ {0x21ce, 0x0b00},
+ {0x21d0, 0x7304},
+ {0x21d2, 0x022b},
+ {0x21d4, 0x40b2},
+ {0x21d6, 0xd081},
+ {0x21d8, 0x0b88},
+ {0x21da, 0x0b00},
+ {0x21dc, 0x7304},
+ {0x21de, 0x0255},
+ {0x21e0, 0x40b2},
+ {0x21e2, 0x0081},
+ {0x21e4, 0x0b88},
+ {0x21e6, 0x4130},
+ {0x23fe, 0xc056},
+ {0x3232, 0xfc0c},
+ {0x3236, 0xfc22},
+ {0x3238, 0xfcfc},
+ {0x323a, 0xfd84},
+ {0x323c, 0xfd08},
+ {0x3246, 0xfcd8},
+ {0x3248, 0xfca8},
+ {0x324e, 0xfcb4},
+ {0x326a, 0x8302},
+ {0x326c, 0x830a},
+ {0x326e, 0x0000},
+ {0x32ca, 0xfc28},
+ {0x32cc, 0xc3bc},
+ {0x32ce, 0xc34c},
+ {0x32d0, 0xc35a},
+ {0x32d2, 0xc368},
+ {0x32d4, 0xc376},
+ {0x32d6, 0xc3c2},
+ {0x32d8, 0xc3e6},
+ {0x32da, 0x0003},
+ {0x32dc, 0x0003},
+ {0x32de, 0x00c7},
+ {0x32e0, 0x0031},
+ {0x32e2, 0x0031},
+ {0x32e4, 0x0031},
+ {0x32e6, 0xfc28},
+ {0x32e8, 0xc3bc},
+ {0x32ea, 0xc384},
+ {0x32ec, 0xc392},
+ {0x32ee, 0xc3a0},
+ {0x32f0, 0xc3ae},
+ {0x32f2, 0xc3c4},
+ {0x32f4, 0xc3e6},
+ {0x32f6, 0x0003},
+ {0x32f8, 0x0003},
+ {0x32fa, 0x00c7},
+ {0x32fc, 0x0031},
+ {0x32fe, 0x0031},
+ {0x3300, 0x0031},
+ {0x3302, 0x82ca},
+ {0x3304, 0xc164},
+ {0x3306, 0x82e6},
+ {0x3308, 0xc19c},
+ {0x330a, 0x001f},
+ {0x330c, 0x001a},
+ {0x330e, 0x0034},
+ {0x3310, 0x0000},
+ {0x3312, 0x0000},
+ {0x3314, 0xfc94},
+ {0x3316, 0xc3d8},
+
+ {0x0a00, 0x0000},
+ {0x0e04, 0x0012},
+ {0x002e, 0x1111},
+ {0x0032, 0x1111},
+ {0x0022, 0x0008},
+ {0x0026, 0x0040},
+ {0x0028, 0x0017},
+ {0x002c, 0x09cf},
+ {0x005c, 0x2101},
+ {0x0006, 0x09de},
+ {0x0008, 0x0ed8},
+ {0x000e, 0x0100},
+ {0x000c, 0x0022},
+ {0x0a22, 0x0000},
+ {0x0a24, 0x0000},
+ {0x0804, 0x0000},
+ {0x0a12, 0x0cc0},
+ {0x0a14, 0x0990},
+ {0x0074, 0x09d8},
+ {0x0076, 0x0000},
+ {0x051e, 0x0000},
+ {0x0200, 0x0400},
+ {0x0a1a, 0x0c00},
+ {0x0a0c, 0x0010},
+ {0x0a1e, 0x0ccf},
+ {0x0402, 0x0110},
+ {0x0404, 0x00f4},
+ {0x0408, 0x0000},
+ {0x0410, 0x008d},
+ {0x0412, 0x011a},
+ {0x0414, 0x864c},
+ /* for OTP */
+ {0x021c, 0x0003},
+ {0x021e, 0x0235},
+ /* for OTP */
+ {0x0c00, 0x9950},
+ {0x0c06, 0x0021},
+ {0x0c10, 0x0040},
+ {0x0c12, 0x0040},
+ {0x0c14, 0x0040},
+ {0x0c16, 0x0040},
+ {0x0a02, 0x0100},
+ {0x0a04, 0x015a},
+ {0x0418, 0x0000},
+ {0x0128, 0x0028},
+ {0x012a, 0xffff},
+ {0x0120, 0x0046},
+ {0x0122, 0x0376},
+ {0x012c, 0x0020},
+ {0x012e, 0xffff},
+ {0x0124, 0x0040},
+ {0x0126, 0x0378},
+ {0x0746, 0x0050},
+ {0x0748, 0x01d5},
+ {0x074a, 0x022b},
+ {0x074c, 0x03b0},
+ {0x0756, 0x043f},
+ {0x0758, 0x3f1d},
+ {0x0b02, 0xe04d},
+ {0x0b10, 0x6821},
+ {0x0b12, 0x0120},
+ {0x0b14, 0x0001},
+ {0x2008, 0x38fd},
+ {0x326e, 0x0000},
+ {0x0900, 0x0300},
+ {0x0902, 0xc319},
+ {0x0914, 0xc109},
+ {0x0916, 0x061a},
+ {0x0918, 0x0407},
+ {0x091a, 0x0a0b},
+ {0x091c, 0x0e08},
+ {0x091e, 0x0a00},
+ {0x090c, 0x0427},
+ {0x090e, 0x0059},
+ {0x0954, 0x0089},
+ {0x0956, 0x0000},
+ {0x0958, 0xca80},
+ {0x095a, 0x9240},
+ {0x0f08, 0x2f04},
+ {0x0f30, 0x001f},
+ {0x0f36, 0x001f},
+ {0x0f04, 0x3a00},
+ {0x0f32, 0x025a},
+ {0x0f38, 0x025a},
+ {0x0f2a, 0x4124},
+ {0x006a, 0x0100},
+ {0x004c, 0x0100},
+ {0x0044, 0x0001},
+};
+
+static const struct hi846_reg mode_640x480_config[] = {
+ {HI846_REG_MODE_SELECT, 0x0000},
+ {HI846_REG_Y_ODD_INC_FOBP, 0x7711},
+ {HI846_REG_Y_ODD_INC_VACT, 0x7711},
+ {HI846_REG_Y_ADDR_START_VACT_H, 0x0148},
+ {HI846_REG_Y_ADDR_END_VACT_H, 0x08c7},
+ {HI846_REG_UNKNOWN_005C, 0x4404},
+ {HI846_REG_FLL, 0x0277},
+ {HI846_REG_LLP, 0x0ed8},
+ {HI846_REG_BINNING_MODE, 0x0322},
+ {HI846_REG_HBIN_MODE, 0x0200},
+ {HI846_REG_UNKNOWN_0A24, 0x0000},
+ {HI846_REG_X_START_H, 0x0058},
+ {HI846_REG_X_OUTPUT_SIZE_H, 0x0280},
+ {HI846_REG_Y_OUTPUT_SIZE_H, 0x01e0},
+
+ /* For OTP */
+ {HI846_REG_UNKNOWN_021C, 0x0003},
+ {HI846_REG_UNKNOWN_021E, 0x0235},
+
+ {HI846_REG_ISP_EN_H, 0x016a},
+ {HI846_REG_UNKNOWN_0418, 0x0210},
+ {HI846_REG_UNKNOWN_0B02, 0xe04d},
+ {HI846_REG_UNKNOWN_0B10, 0x7021},
+ {HI846_REG_UNKNOWN_0B12, 0x0120},
+ {HI846_REG_UNKNOWN_0B14, 0x0001},
+ {HI846_REG_UNKNOWN_2008, 0x38fd},
+ {HI846_REG_UNKNOWN_326E, 0x0000},
+};
+
+static const struct hi846_reg mode_640x480_mipi_2lane[] = {
+ {HI846_REG_UNKNOWN_0900, 0x0300},
+ {HI846_REG_MIPI_TX_OP_MODE, 0x4319},
+ {HI846_REG_UNKNOWN_0914, 0xc105},
+ {HI846_REG_TCLK_PREPARE, 0x030c},
+ {HI846_REG_UNKNOWN_0918, 0x0304},
+ {HI846_REG_THS_ZERO, 0x0708},
+ {HI846_REG_TCLK_POST, 0x0b04},
+ {HI846_REG_UNKNOWN_091E, 0x0500},
+ {HI846_REG_UNKNOWN_090C, 0x0208},
+ {HI846_REG_UNKNOWN_090E, 0x009a},
+ {HI846_REG_UNKNOWN_0954, 0x0089},
+ {HI846_REG_UNKNOWN_0956, 0x0000},
+ {HI846_REG_UNKNOWN_0958, 0xca80},
+ {HI846_REG_UNKNOWN_095A, 0x9240},
+ {HI846_REG_PLL_CFG_MIPI2_H, 0x4924},
+ {HI846_REG_TG_ENABLE, 0x0100},
+};
+
+static const struct hi846_reg mode_1280x720_config[] = {
+ {HI846_REG_MODE_SELECT, 0x0000},
+ {HI846_REG_Y_ODD_INC_FOBP, 0x3311},
+ {HI846_REG_Y_ODD_INC_VACT, 0x3311},
+ {HI846_REG_Y_ADDR_START_VACT_H, 0x0238},
+ {HI846_REG_Y_ADDR_END_VACT_H, 0x07d7},
+ {HI846_REG_UNKNOWN_005C, 0x4202},
+ {HI846_REG_FLL, 0x034a},
+ {HI846_REG_LLP, 0x0ed8},
+ {HI846_REG_BINNING_MODE, 0x0122},
+ {HI846_REG_HBIN_MODE, 0x0100},
+ {HI846_REG_UNKNOWN_0A24, 0x0000},
+ {HI846_REG_X_START_H, 0x00b0},
+ {HI846_REG_X_OUTPUT_SIZE_H, 0x0500},
+ {HI846_REG_Y_OUTPUT_SIZE_H, 0x02d0},
+ {HI846_REG_EXPOSURE, 0x0344},
+
+ /* For OTP */
+ {HI846_REG_UNKNOWN_021C, 0x0003},
+ {HI846_REG_UNKNOWN_021E, 0x0235},
+
+ {HI846_REG_ISP_EN_H, 0x016a},
+ {HI846_REG_UNKNOWN_0418, 0x0410},
+ {HI846_REG_UNKNOWN_0B02, 0xe04d},
+ {HI846_REG_UNKNOWN_0B10, 0x6c21},
+ {HI846_REG_UNKNOWN_0B12, 0x0120},
+ {HI846_REG_UNKNOWN_0B14, 0x0005},
+ {HI846_REG_UNKNOWN_2008, 0x38fd},
+ {HI846_REG_UNKNOWN_326E, 0x0000},
+};
+
+static const struct hi846_reg mode_1280x720_mipi_2lane[] = {
+ {HI846_REG_UNKNOWN_0900, 0x0300},
+ {HI846_REG_MIPI_TX_OP_MODE, 0x4319},
+ {HI846_REG_UNKNOWN_0914, 0xc109},
+ {HI846_REG_TCLK_PREPARE, 0x061a},
+ {HI846_REG_UNKNOWN_0918, 0x0407},
+ {HI846_REG_THS_ZERO, 0x0a0b},
+ {HI846_REG_TCLK_POST, 0x0e08},
+ {HI846_REG_UNKNOWN_091E, 0x0a00},
+ {HI846_REG_UNKNOWN_090C, 0x0427},
+ {HI846_REG_UNKNOWN_090E, 0x0145},
+ {HI846_REG_UNKNOWN_0954, 0x0089},
+ {HI846_REG_UNKNOWN_0956, 0x0000},
+ {HI846_REG_UNKNOWN_0958, 0xca80},
+ {HI846_REG_UNKNOWN_095A, 0x9240},
+ {HI846_REG_PLL_CFG_MIPI2_H, 0x4124},
+ {HI846_REG_TG_ENABLE, 0x0100},
+};
+
+static const struct hi846_reg mode_1280x720_mipi_4lane[] = {
+ /* 360Mbps */
+ {HI846_REG_UNKNOWN_0900, 0x0300},
+ {HI846_REG_MIPI_TX_OP_MODE, 0xc319},
+ {HI846_REG_UNKNOWN_0914, 0xc105},
+ {HI846_REG_TCLK_PREPARE, 0x030c},
+ {HI846_REG_UNKNOWN_0918, 0x0304},
+ {HI846_REG_THS_ZERO, 0x0708},
+ {HI846_REG_TCLK_POST, 0x0b04},
+ {HI846_REG_UNKNOWN_091E, 0x0500},
+ {HI846_REG_UNKNOWN_090C, 0x0208},
+ {HI846_REG_UNKNOWN_090E, 0x008a},
+ {HI846_REG_UNKNOWN_0954, 0x0089},
+ {HI846_REG_UNKNOWN_0956, 0x0000},
+ {HI846_REG_UNKNOWN_0958, 0xca80},
+ {HI846_REG_UNKNOWN_095A, 0x9240},
+ {HI846_REG_PLL_CFG_MIPI2_H, 0x4924},
+ {HI846_REG_TG_ENABLE, 0x0100},
+};
+
+static const struct hi846_reg mode_1632x1224_config[] = {
+ {HI846_REG_MODE_SELECT, 0x0000},
+ {HI846_REG_Y_ODD_INC_FOBP, 0x3311},
+ {HI846_REG_Y_ODD_INC_VACT, 0x3311},
+ {HI846_REG_Y_ADDR_START_VACT_H, 0x0040},
+ {HI846_REG_Y_ADDR_END_VACT_H, 0x09cf},
+ {HI846_REG_UNKNOWN_005C, 0x4202},
+ {HI846_REG_FLL, 0x09de},
+ {HI846_REG_LLP, 0x0ed8},
+ {HI846_REG_BINNING_MODE, 0x0122},
+ {HI846_REG_HBIN_MODE, 0x0100},
+ {HI846_REG_UNKNOWN_0A24, 0x0000},
+ {HI846_REG_X_START_H, 0x0000},
+ {HI846_REG_X_OUTPUT_SIZE_H, 0x0660},
+ {HI846_REG_Y_OUTPUT_SIZE_H, 0x04c8},
+ {HI846_REG_EXPOSURE, 0x09d8},
+
+ /* For OTP */
+ {HI846_REG_UNKNOWN_021C, 0x0003},
+ {HI846_REG_UNKNOWN_021E, 0x0235},
+
+ {HI846_REG_ISP_EN_H, 0x016a},
+ {HI846_REG_UNKNOWN_0418, 0x0000},
+ {HI846_REG_UNKNOWN_0B02, 0xe04d},
+ {HI846_REG_UNKNOWN_0B10, 0x6c21},
+ {HI846_REG_UNKNOWN_0B12, 0x0120},
+ {HI846_REG_UNKNOWN_0B14, 0x0005},
+ {HI846_REG_UNKNOWN_2008, 0x38fd},
+ {HI846_REG_UNKNOWN_326E, 0x0000},
+};
+
+static const struct hi846_reg mode_1632x1224_mipi_2lane[] = {
+ {HI846_REG_UNKNOWN_0900, 0x0300},
+ {HI846_REG_MIPI_TX_OP_MODE, 0x4319},
+ {HI846_REG_UNKNOWN_0914, 0xc109},
+ {HI846_REG_TCLK_PREPARE, 0x061a},
+ {HI846_REG_UNKNOWN_0918, 0x0407},
+ {HI846_REG_THS_ZERO, 0x0a0b},
+ {HI846_REG_TCLK_POST, 0x0e08},
+ {HI846_REG_UNKNOWN_091E, 0x0a00},
+ {HI846_REG_UNKNOWN_090C, 0x0427},
+ {HI846_REG_UNKNOWN_090E, 0x0069},
+ {HI846_REG_UNKNOWN_0954, 0x0089},
+ {HI846_REG_UNKNOWN_0956, 0x0000},
+ {HI846_REG_UNKNOWN_0958, 0xca80},
+ {HI846_REG_UNKNOWN_095A, 0x9240},
+ {HI846_REG_PLL_CFG_MIPI2_H, 0x4124},
+ {HI846_REG_TG_ENABLE, 0x0100},
+};
+
+static const struct hi846_reg mode_1632x1224_mipi_4lane[] = {
+ {HI846_REG_UNKNOWN_0900, 0x0300},
+ {HI846_REG_MIPI_TX_OP_MODE, 0xc319},
+ {HI846_REG_UNKNOWN_0914, 0xc105},
+ {HI846_REG_TCLK_PREPARE, 0x030c},
+ {HI846_REG_UNKNOWN_0918, 0x0304},
+ {HI846_REG_THS_ZERO, 0x0708},
+ {HI846_REG_TCLK_POST, 0x0b04},
+ {HI846_REG_UNKNOWN_091E, 0x0500},
+ {HI846_REG_UNKNOWN_090C, 0x0208},
+ {HI846_REG_UNKNOWN_090E, 0x001c},
+ {HI846_REG_UNKNOWN_0954, 0x0089},
+ {HI846_REG_UNKNOWN_0956, 0x0000},
+ {HI846_REG_UNKNOWN_0958, 0xca80},
+ {HI846_REG_UNKNOWN_095A, 0x9240},
+ {HI846_REG_PLL_CFG_MIPI2_H, 0x4924},
+ {HI846_REG_TG_ENABLE, 0x0100},
+};
+
+static const char * const hi846_test_pattern_menu[] = {
+ "Disabled",
+ "Solid Colour",
+ "100% Colour Bars",
+ "Fade To Grey Colour Bars",
+ "PN9",
+ "Gradient Horizontal",
+ "Gradient Vertical",
+ "Check Board",
+ "Slant Pattern",
+ "Resolution Pattern",
+};
+
+#define FREQ_INDEX_640 0
+#define FREQ_INDEX_1280 1
+static const s64 hi846_link_freqs[] = {
+ [FREQ_INDEX_640] = 80000000,
+ [FREQ_INDEX_1280] = 200000000,
+};
+
+static const struct hi846_reg_list hi846_init_regs_list_2lane = {
+ .num_of_regs = ARRAY_SIZE(hi846_init_2lane),
+ .regs = hi846_init_2lane,
+};
+
+static const struct hi846_reg_list hi846_init_regs_list_4lane = {
+ .num_of_regs = ARRAY_SIZE(hi846_init_4lane),
+ .regs = hi846_init_4lane,
+};
+
+static const struct hi846_mode supported_modes[] = {
+ {
+ .width = 640,
+ .height = 480,
+ .link_freq_index = FREQ_INDEX_640,
+ .fps = 120,
+ .frame_len = 631,
+ .llp = HI846_LINE_LENGTH,
+ .reg_list_config = {
+ .num_of_regs = ARRAY_SIZE(mode_640x480_config),
+ .regs = mode_640x480_config,
+ },
+ .reg_list_2lane = {
+ .num_of_regs = ARRAY_SIZE(mode_640x480_mipi_2lane),
+ .regs = mode_640x480_mipi_2lane,
+ },
+ .crop = {
+ .left = 0x58,
+ .top = 0x148,
+ .width = 640 * 4,
+ .height = 480 * 4,
+ },
+ },
+ {
+ .width = 1280,
+ .height = 720,
+ .link_freq_index = FREQ_INDEX_1280,
+ .fps = 90,
+ .frame_len = 842,
+ .llp = HI846_LINE_LENGTH,
+ .reg_list_config = {
+ .num_of_regs = ARRAY_SIZE(mode_1280x720_config),
+ .regs = mode_1280x720_config,
+ },
+ .reg_list_2lane = {
+ .num_of_regs = ARRAY_SIZE(mode_1280x720_mipi_2lane),
+ .regs = mode_1280x720_mipi_2lane,
+ },
+ .reg_list_4lane = {
+ .num_of_regs = ARRAY_SIZE(mode_1280x720_mipi_4lane),
+ .regs = mode_1280x720_mipi_4lane,
+ },
+ .crop = {
+ .left = 0xb0,
+ .top = 0x238,
+ .width = 1280 * 2,
+ .height = 720 * 2,
+ },
+ },
+ {
+ .width = 1632,
+ .height = 1224,
+ .link_freq_index = FREQ_INDEX_1280,
+ .fps = 30,
+ .frame_len = 2526,
+ .llp = HI846_LINE_LENGTH,
+ .reg_list_config = {
+ .num_of_regs = ARRAY_SIZE(mode_1632x1224_config),
+ .regs = mode_1632x1224_config,
+ },
+ .reg_list_2lane = {
+ .num_of_regs = ARRAY_SIZE(mode_1632x1224_mipi_2lane),
+ .regs = mode_1632x1224_mipi_2lane,
+ },
+ .reg_list_4lane = {
+ .num_of_regs = ARRAY_SIZE(mode_1632x1224_mipi_4lane),
+ .regs = mode_1632x1224_mipi_4lane,
+ },
+ .crop = {
+ .left = 0x0,
+ .top = 0x0,
+ .width = 1632 * 2,
+ .height = 1224 * 2,
+ },
+ }
+};
+
+struct hi846_datafmt {
+ u32 code;
+ enum v4l2_colorspace colorspace;
+};
+
+static const char * const hi846_supply_names[] = {
+ "vddio", /* Digital I/O (1.8V or 2.8V) */
+ "vdda", /* Analog (2.8V) */
+ "vddd", /* Digital Core (1.2V) */
+};
+
+#define HI846_NUM_SUPPLIES ARRAY_SIZE(hi846_supply_names)
+
+struct hi846 {
+ struct gpio_desc *rst_gpio;
+ struct gpio_desc *shutdown_gpio;
+ struct regulator_bulk_data supplies[HI846_NUM_SUPPLIES];
+ struct clk *clock;
+ const struct hi846_datafmt *fmt;
+ struct v4l2_subdev sd;
+ struct media_pad pad;
+ struct v4l2_ctrl_handler ctrl_handler;
+ u8 nr_lanes;
+
+ struct v4l2_ctrl *link_freq;
+ struct v4l2_ctrl *pixel_rate;
+ struct v4l2_ctrl *vblank;
+ struct v4l2_ctrl *hblank;
+ struct v4l2_ctrl *exposure;
+
+ struct mutex mutex; /* protect cur_mode, streaming and chip access */
+ const struct hi846_mode *cur_mode;
+ bool streaming;
+};
+
+static inline struct hi846 *to_hi846(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct hi846, sd);
+}
+
+static const struct hi846_datafmt hi846_colour_fmts[] = {
+ { HI846_MEDIA_BUS_FORMAT, V4L2_COLORSPACE_RAW },
+};
+
+static const struct hi846_datafmt *hi846_find_datafmt(u32 code)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(hi846_colour_fmts); i++)
+ if (hi846_colour_fmts[i].code == code)
+ return &hi846_colour_fmts[i];
+
+ return NULL;
+}
+
+static inline u8 hi846_get_link_freq_index(struct hi846 *hi846)
+{
+ return hi846->cur_mode->link_freq_index;
+}
+
+static s64 hi846_get_link_freq(struct hi846 *hi846)
+{
+ u8 index = hi846_get_link_freq_index(hi846);
+
+ return hi846_link_freqs[index];
+}
+
+static u64 hi846_calc_pixel_rate(struct hi846 *hi846)
+{
+ s64 link_freq = hi846_get_link_freq(hi846);
+ u64 pixel_rate = link_freq * 2 * hi846->nr_lanes;
+
+ do_div(pixel_rate, HI846_RGB_DEPTH);
+
+ return pixel_rate;
+}
+
+static int hi846_read_reg(struct hi846 *hi846, u16 reg, u8 *val)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&hi846->sd);
+ struct i2c_msg msgs[2];
+ u8 addr_buf[2];
+ u8 data_buf[1] = {0};
+ int ret;
+
+ put_unaligned_be16(reg, addr_buf);
+ msgs[0].addr = client->addr;
+ msgs[0].flags = 0;
+ msgs[0].len = sizeof(addr_buf);
+ msgs[0].buf = addr_buf;
+ msgs[1].addr = client->addr;
+ msgs[1].flags = I2C_M_RD;
+ msgs[1].len = 1;
+ msgs[1].buf = &data_buf[0];
+
+ ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (ret != ARRAY_SIZE(msgs)) {
+ dev_err(&client->dev, "i2c read error: %d\n", ret);
+ return -EIO;
+ }
+
+ *val = data_buf[0];
+
+ return 0;
+}
+
+static int hi846_write_reg(struct hi846 *hi846, u16 reg, u8 val)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&hi846->sd);
+ u8 buf[3] = { reg >> 8, reg & 0xff, val };
+ struct i2c_msg msg[] = {
+ { .addr = client->addr, .flags = 0,
+ .len = ARRAY_SIZE(buf), .buf = buf },
+ };
+ int ret;
+
+ ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+ if (ret != ARRAY_SIZE(msg)) {
+ dev_err(&client->dev, "i2c write error\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void hi846_write_reg_16(struct hi846 *hi846, u16 reg, u16 val, int *err)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&hi846->sd);
+ u8 buf[6];
+ int ret;
+
+ if (*err < 0)
+ return;
+
+ put_unaligned_be16(reg, buf);
+ put_unaligned_be32(val << 8 * 2, buf + 2);
+ ret = i2c_master_send(client, buf, 4);
+ if (ret != 4) {
+ dev_err(&client->dev, "i2c_master_send != 4: %d\n", ret);
+ *err = -EIO;
+ }
+}
+
+static int hi846_write_reg_list(struct hi846 *hi846,
+ const struct hi846_reg_list *r_list)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&hi846->sd);
+ unsigned int i;
+ int ret = 0;
+
+ for (i = 0; i < r_list->num_of_regs; i++) {
+ hi846_write_reg_16(hi846, r_list->regs[i].address,
+ r_list->regs[i].val, &ret);
+ if (ret) {
+ dev_err_ratelimited(&client->dev,
+ "failed to write reg 0x%4.4x. error = %d",
+ r_list->regs[i].address, ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int hi846_update_digital_gain(struct hi846 *hi846, u16 d_gain)
+{
+ int ret = 0;
+
+ hi846_write_reg_16(hi846, HI846_REG_MWB_GR_GAIN_H, d_gain, &ret);
+ hi846_write_reg_16(hi846, HI846_REG_MWB_GB_GAIN_H, d_gain, &ret);
+ hi846_write_reg_16(hi846, HI846_REG_MWB_R_GAIN_H, d_gain, &ret);
+ hi846_write_reg_16(hi846, HI846_REG_MWB_B_GAIN_H, d_gain, &ret);
+
+ return ret;
+}
+
+static int hi846_test_pattern(struct hi846 *hi846, u32 pattern)
+{
+ int ret;
+ u8 val;
+
+ if (pattern) {
+ ret = hi846_read_reg(hi846, HI846_REG_ISP, &val);
+ if (ret)
+ return ret;
+
+ ret = hi846_write_reg(hi846, HI846_REG_ISP,
+ val | HI846_REG_ISP_TPG_EN);
+ if (ret)
+ return ret;
+ }
+
+ return hi846_write_reg(hi846, HI846_REG_TEST_PATTERN, pattern);
+}
+
+static int hi846_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct hi846 *hi846 = container_of(ctrl->handler,
+ struct hi846, ctrl_handler);
+ struct i2c_client *client = v4l2_get_subdevdata(&hi846->sd);
+ s64 exposure_max;
+ int ret = 0;
+ u32 shutter, frame_len;
+
+ /* Propagate change of current control to all related controls */
+ if (ctrl->id == V4L2_CID_VBLANK) {
+ /* Update max exposure while meeting expected vblanking */
+ exposure_max = hi846->cur_mode->height + ctrl->val -
+ HI846_EXPOSURE_MAX_MARGIN;
+ __v4l2_ctrl_modify_range(hi846->exposure,
+ hi846->exposure->minimum,
+ exposure_max, hi846->exposure->step,
+ exposure_max);
+ }
+
+ if (!pm_runtime_get_if_in_use(&client->dev))
+ return 0;
+
+ switch (ctrl->id) {
+ case V4L2_CID_ANALOGUE_GAIN:
+ ret = hi846_write_reg(hi846, HI846_REG_ANALOG_GAIN, ctrl->val);
+ break;
+
+ case V4L2_CID_DIGITAL_GAIN:
+ ret = hi846_update_digital_gain(hi846, ctrl->val);
+ break;
+
+ case V4L2_CID_EXPOSURE:
+ shutter = ctrl->val;
+ frame_len = hi846->cur_mode->frame_len;
+
+ if (shutter > frame_len - 6) { /* margin */
+ frame_len = shutter + 6;
+ if (frame_len > 0xffff) { /* max frame len */
+ frame_len = 0xffff;
+ }
+ }
+
+ if (shutter < 6)
+ shutter = 6;
+ if (shutter > (0xffff - 6))
+ shutter = 0xffff - 6;
+
+ hi846_write_reg_16(hi846, HI846_REG_FLL, frame_len, &ret);
+ hi846_write_reg_16(hi846, HI846_REG_EXPOSURE, shutter, &ret);
+ break;
+
+ case V4L2_CID_VBLANK:
+ /* Update FLL that meets expected vertical blanking */
+ hi846_write_reg_16(hi846, HI846_REG_FLL,
+ hi846->cur_mode->height + ctrl->val, &ret);
+ break;
+ case V4L2_CID_TEST_PATTERN:
+ ret = hi846_test_pattern(hi846, ctrl->val);
+ break;
+
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ pm_runtime_put(&client->dev);
+
+ return ret;
+}
+
+static const struct v4l2_ctrl_ops hi846_ctrl_ops = {
+ .s_ctrl = hi846_set_ctrl,
+};
+
+static int hi846_init_controls(struct hi846 *hi846)
+{
+ struct v4l2_ctrl_handler *ctrl_hdlr;
+ s64 exposure_max, h_blank;
+ int ret;
+ struct i2c_client *client = v4l2_get_subdevdata(&hi846->sd);
+
+ ctrl_hdlr = &hi846->ctrl_handler;
+ ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8);
+ if (ret)
+ return ret;
+
+ ctrl_hdlr->lock = &hi846->mutex;
+
+ hi846->link_freq =
+ v4l2_ctrl_new_int_menu(ctrl_hdlr, &hi846_ctrl_ops,
+ V4L2_CID_LINK_FREQ,
+ ARRAY_SIZE(hi846_link_freqs) - 1,
+ 0, hi846_link_freqs);
+ if (hi846->link_freq)
+ hi846->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+ hi846->pixel_rate =
+ v4l2_ctrl_new_std(ctrl_hdlr, &hi846_ctrl_ops,
+ V4L2_CID_PIXEL_RATE, 0,
+ hi846_calc_pixel_rate(hi846), 1,
+ hi846_calc_pixel_rate(hi846));
+ hi846->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &hi846_ctrl_ops,
+ V4L2_CID_VBLANK,
+ hi846->cur_mode->frame_len -
+ hi846->cur_mode->height,
+ HI846_FLL_MAX -
+ hi846->cur_mode->height, 1,
+ hi846->cur_mode->frame_len -
+ hi846->cur_mode->height);
+
+ h_blank = hi846->cur_mode->llp - hi846->cur_mode->width;
+
+ hi846->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &hi846_ctrl_ops,
+ V4L2_CID_HBLANK, h_blank, h_blank, 1,
+ h_blank);
+ if (hi846->hblank)
+ hi846->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+ v4l2_ctrl_new_std(ctrl_hdlr, &hi846_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
+ HI846_ANAL_GAIN_MIN, HI846_ANAL_GAIN_MAX,
+ HI846_ANAL_GAIN_STEP, HI846_ANAL_GAIN_MIN);
+ v4l2_ctrl_new_std(ctrl_hdlr, &hi846_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
+ HI846_DGTL_GAIN_MIN, HI846_DGTL_GAIN_MAX,
+ HI846_DGTL_GAIN_STEP, HI846_DGTL_GAIN_DEFAULT);
+ exposure_max = hi846->cur_mode->frame_len - HI846_EXPOSURE_MAX_MARGIN;
+ hi846->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &hi846_ctrl_ops,
+ V4L2_CID_EXPOSURE,
+ HI846_EXPOSURE_MIN, exposure_max,
+ HI846_EXPOSURE_STEP,
+ exposure_max);
+ v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &hi846_ctrl_ops,
+ V4L2_CID_TEST_PATTERN,
+ ARRAY_SIZE(hi846_test_pattern_menu) - 1,
+ 0, 0, hi846_test_pattern_menu);
+ if (ctrl_hdlr->error) {
+ dev_err(&client->dev, "v4l ctrl handler error: %d\n",
+ ctrl_hdlr->error);
+ return ctrl_hdlr->error;
+ }
+
+ hi846->sd.ctrl_handler = ctrl_hdlr;
+
+ return 0;
+}
+
+static int hi846_set_video_mode(struct hi846 *hi846, int fps)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&hi846->sd);
+ int frame_length;
+ int ret = 0;
+ int dummy_lines;
+ s64 link_freq = hi846_get_link_freq(hi846);
+
+ dev_dbg(&client->dev, "%s: link freq: %lld\n", __func__,
+ hi846_get_link_freq(hi846));
+
+ do_div(link_freq, fps);
+ frame_length = link_freq;
+ do_div(frame_length, HI846_LINE_LENGTH);
+
+ dummy_lines = (frame_length > hi846->cur_mode->frame_len) ?
+ (frame_length - hi846->cur_mode->frame_len) : 0;
+
+ frame_length = hi846->cur_mode->frame_len + dummy_lines;
+
+ dev_dbg(&client->dev, "%s: frame length calculated: %d\n", __func__,
+ frame_length);
+
+ hi846_write_reg_16(hi846, HI846_REG_FLL, frame_length & 0xFFFF, &ret);
+ hi846_write_reg_16(hi846, HI846_REG_LLP, HI846_LINE_LENGTH & 0xFFFF, &ret);
+
+ return ret;
+}
+
+static int hi846_start_streaming(struct hi846 *hi846)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&hi846->sd);
+ int ret = 0;
+ u8 val;
+
+ if (hi846->nr_lanes == 2)
+ ret = hi846_write_reg_list(hi846, &hi846_init_regs_list_2lane);
+ else
+ ret = hi846_write_reg_list(hi846, &hi846_init_regs_list_4lane);
+ if (ret) {
+ dev_err(&client->dev, "failed to set plls: %d\n", ret);
+ return ret;
+ }
+
+ ret = hi846_write_reg_list(hi846, &hi846->cur_mode->reg_list_config);
+ if (ret) {
+ dev_err(&client->dev, "failed to set mode: %d\n", ret);
+ return ret;
+ }
+
+ if (hi846->nr_lanes == 2) {
+ if (!&hi846->cur_mode->reg_list_2lane) {
+ dev_err(&client->dev, "2 lanes unsupported for this mode\n");
+ return -EINVAL;
+ }
+ ret = hi846_write_reg_list(hi846, &hi846->cur_mode->reg_list_2lane);
+ } else {
+ if (!&hi846->cur_mode->reg_list_4lane) {
+ dev_err(&client->dev, "4 lanes unsupported for this mode\n");
+ return -EINVAL;
+ }
+ ret = hi846_write_reg_list(hi846, &hi846->cur_mode->reg_list_4lane);
+ }
+ if (ret) {
+ dev_err(&client->dev, "failed to set mipi mode: %d\n", ret);
+ return ret;
+ }
+
+ hi846_set_video_mode(hi846, hi846->cur_mode->fps);
+
+ ret = __v4l2_ctrl_handler_setup(hi846->sd.ctrl_handler);
+ if (ret)
+ return ret;
+
+ /*
+ * Reading 0x0034 is purely done for debugging reasons: It is not
+ * documented in the DS but only mentioned once:
+ * "If 0x0034[2] bit is disabled , Visible pixel width and height is 0."
+ * So even though that sounds like we won't see anything, we don't
+ * know more about this, so in that case only inform the user but do
+ * nothing more.
+ */
+ ret = hi846_read_reg(hi846, 0x0034, &val);
+ if (ret)
+ return ret;
+ if (!(val & BIT(2)))
+ dev_info(&client->dev, "visible pixel width and height is 0\n");
+
+ ret = hi846_write_reg(hi846, HI846_REG_MODE_SELECT,
+ HI846_MODE_STREAMING);
+ if (ret) {
+ dev_err(&client->dev, "failed to start stream");
+ return ret;
+ }
+
+ hi846->streaming = 1;
+
+ dev_dbg(&client->dev, "%s: started streaming successfully\n", __func__);
+
+ return ret;
+}
+
+static void hi846_stop_streaming(struct hi846 *hi846)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&hi846->sd);
+
+ if (hi846_write_reg(hi846, HI846_REG_MODE_SELECT, HI846_MODE_STANDBY))
+ dev_err(&client->dev, "failed to stop stream");
+
+ hi846->streaming = 0;
+}
+
+static int hi846_set_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct hi846 *hi846 = to_hi846(sd);
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ int ret = 0;
+
+ if (hi846->streaming == enable)
+ return 0;
+
+ mutex_lock(&hi846->mutex);
+
+ if (enable) {
+ ret = pm_runtime_get_sync(&client->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(&client->dev);
+ goto out;
+ }
+
+ ret = hi846_start_streaming(hi846);
+ if (ret) {
+ enable = 0;
+ hi846_stop_streaming(hi846);
+ pm_runtime_put(&client->dev);
+ }
+ } else {
+ hi846_stop_streaming(hi846);
+ pm_runtime_put(&client->dev);
+ }
+
+out:
+ mutex_unlock(&hi846->mutex);
+
+ return ret;
+}
+
+static int hi846_power_on(struct hi846 *hi846)
+{
+ int ret;
+
+ ret = regulator_bulk_enable(HI846_NUM_SUPPLIES, hi846->supplies);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_prepare_enable(hi846->clock);
+ if (ret < 0)
+ return ret;
+
+ if (hi846->shutdown_gpio)
+ gpiod_set_value_cansleep(hi846->shutdown_gpio, 0);
+
+ /* 30us = 2400 cycles at 80Mhz */
+ usleep_range(30, 60);
+ if (hi846->rst_gpio)
+ gpiod_set_value_cansleep(hi846->rst_gpio, 0);
+ usleep_range(30, 60);
+
+ return 0;
+}
+
+static void hi846_power_off(struct hi846 *hi846)
+{
+ if (hi846->rst_gpio)
+ gpiod_set_value_cansleep(hi846->rst_gpio, 1);
+
+ if (hi846->shutdown_gpio)
+ gpiod_set_value_cansleep(hi846->shutdown_gpio, 1);
+
+ clk_disable_unprepare(hi846->clock);
+ regulator_bulk_disable(HI846_NUM_SUPPLIES, hi846->supplies);
+}
+
+static int __maybe_unused hi846_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct hi846 *hi846 = to_hi846(sd);
+
+ if (hi846->streaming)
+ hi846_stop_streaming(hi846);
+
+ hi846_power_off(hi846);
+
+ return 0;
+}
+
+static int __maybe_unused hi846_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct hi846 *hi846 = to_hi846(sd);
+ int ret;
+
+ ret = hi846_power_on(hi846);
+ if (ret)
+ return ret;
+
+ if (hi846->streaming) {
+ ret = hi846_start_streaming(hi846);
+ if (ret) {
+ dev_err(dev, "%s: start streaming failed: %d\n",
+ __func__, ret);
+ goto error;
+ }
+ }
+
+ return 0;
+
+error:
+ hi846_power_off(hi846);
+ return ret;
+}
+
+static int hi846_set_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct hi846 *hi846 = to_hi846(sd);
+ struct v4l2_mbus_framefmt *mf = &format->format;
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ const struct hi846_datafmt *fmt = hi846_find_datafmt(mf->code);
+ u32 tgt_fps;
+ s32 vblank_def, h_blank;
+
+ if (!fmt) {
+ mf->code = hi846_colour_fmts[0].code;
+ mf->colorspace = hi846_colour_fmts[0].colorspace;
+ fmt = &hi846_colour_fmts[0];
+ }
+
+ if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+ *v4l2_subdev_get_try_format(sd, cfg, format->pad) = *mf;
+ return 0;
+ }
+
+ mutex_lock(&hi846->mutex);
+
+ if (hi846->streaming) {
+ mutex_unlock(&hi846->mutex);
+ return -EBUSY;
+ }
+
+ hi846->fmt = fmt;
+
+ hi846->cur_mode =
+ v4l2_find_nearest_size(supported_modes,
+ ARRAY_SIZE(supported_modes),
+ width, height, mf->width, mf->height);
+ dev_dbg(&client->dev, "%s: found mode: %dx%d\n", __func__,
+ hi846->cur_mode->width, hi846->cur_mode->height);
+
+ tgt_fps = hi846->cur_mode->fps;
+ dev_dbg(&client->dev, "%s: target fps: %d\n", __func__, tgt_fps);
+
+ mf->width = hi846->cur_mode->width;
+ mf->height = hi846->cur_mode->height;
+ mf->code = HI846_MEDIA_BUS_FORMAT;
+ mf->field = V4L2_FIELD_NONE;
+
+ __v4l2_ctrl_s_ctrl(hi846->link_freq, hi846_get_link_freq_index(hi846));
+ __v4l2_ctrl_s_ctrl_int64(hi846->pixel_rate,
+ hi846_calc_pixel_rate(hi846));
+
+ /* Update limits and set FPS to default */
+ vblank_def = hi846->cur_mode->frame_len - hi846->cur_mode->height;
+ __v4l2_ctrl_modify_range(hi846->vblank,
+ hi846->cur_mode->frame_len - hi846->cur_mode->height,
+ HI846_FLL_MAX - hi846->cur_mode->height, 1,
+ vblank_def);
+ __v4l2_ctrl_s_ctrl(hi846->vblank, vblank_def);
+
+ h_blank = hi846->cur_mode->llp - hi846->cur_mode->width;
+
+ __v4l2_ctrl_modify_range(hi846->hblank, h_blank, h_blank, 1,
+ h_blank);
+
+ dev_dbg(&client->dev, "Set fmt w=%d h=%d code=0x%x colorspace=0x%x\n",
+ mf->width, mf->height,
+ fmt->code, fmt->colorspace);
+
+ mutex_unlock(&hi846->mutex);
+
+ return 0;
+}
+
+static int hi846_get_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct hi846 *hi846 = to_hi846(sd);
+ struct v4l2_mbus_framefmt *mf = &format->format;
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+ format->format = *v4l2_subdev_get_try_format(&hi846->sd,
+ cfg,
+ format->pad);
+ return 0;
+ }
+
+ mutex_lock(&hi846->mutex);
+ mf->code = HI846_MEDIA_BUS_FORMAT;
+ mf->colorspace = V4L2_COLORSPACE_RAW;
+ mf->field = V4L2_FIELD_NONE;
+ mf->width = hi846->cur_mode->width;
+ mf->height = hi846->cur_mode->height;
+ mutex_unlock(&hi846->mutex);
+ dev_dbg(&client->dev,
+ "Get format w=%d h=%d code=0x%x colorspace=0x%x\n",
+ mf->width, mf->height, mf->code, mf->colorspace);
+
+ return 0;
+}
+
+static int hi846_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ if (code->pad || code->index > 0)
+ return -EINVAL;
+
+ code->code = HI846_MEDIA_BUS_FORMAT;
+
+ return 0;
+}
+
+static int hi846_enum_frame_size(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ if (fse->pad || fse->index >= ARRAY_SIZE(supported_modes))
+ return -EINVAL;
+
+ if (fse->code != HI846_MEDIA_BUS_FORMAT) {
+ dev_err(&client->dev, "frame size enum not matching\n");
+ return -EINVAL;
+ }
+
+ fse->min_width = supported_modes[fse->index].width;
+ fse->max_width = supported_modes[fse->index].width;
+ fse->min_height = supported_modes[fse->index].height;
+ fse->max_height = supported_modes[fse->index].height;
+
+ dev_dbg(&client->dev, "%s: max width: %d max height: %d\n", __func__,
+ fse->max_width, fse->max_height);
+
+ return 0;
+}
+
+static int hi846_get_selection(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_selection *sel)
+{
+ struct hi846 *hi846 = to_hi846(sd);
+
+ switch (sel->target) {
+ case V4L2_SEL_TGT_CROP:
+ mutex_lock(&hi846->mutex);
+ switch (sel->which) {
+ case V4L2_SUBDEV_FORMAT_TRY:
+ v4l2_subdev_get_try_crop(sd, cfg, sel->pad);
+ break;
+ case V4L2_SUBDEV_FORMAT_ACTIVE:
+ sel->r = hi846->cur_mode->crop;
+ break;
+ }
+ mutex_unlock(&hi846->mutex);
+ return 0;
+ case V4L2_SEL_TGT_CROP_BOUNDS:
+ case V4L2_SEL_TGT_CROP_DEFAULT:
+ sel->r.top = 0;
+ sel->r.left = 0;
+ sel->r.width = 3264;
+ sel->r.height = 2448;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int hi846_init_cfg(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg)
+{
+ struct hi846 *hi846 = to_hi846(sd);
+ struct v4l2_mbus_framefmt *mf;
+
+ mf = v4l2_subdev_get_try_format(sd, cfg, 0);
+
+ mutex_lock(&hi846->mutex);
+ mf->code = HI846_MEDIA_BUS_FORMAT;
+ mf->colorspace = V4L2_COLORSPACE_RAW;
+ mf->field = V4L2_FIELD_NONE;
+ mf->width = hi846->cur_mode->width;
+ mf->height = hi846->cur_mode->height;
+ mutex_unlock(&hi846->mutex);
+
+ return 0;
+}
+
+static const struct v4l2_subdev_video_ops hi846_video_ops = {
+ .s_stream = hi846_set_stream,
+};
+
+static const struct v4l2_subdev_pad_ops hi846_pad_ops = {
+ .init_cfg = hi846_init_cfg,
+ .enum_frame_size = hi846_enum_frame_size,
+ .enum_mbus_code = hi846_enum_mbus_code,
+ .set_fmt = hi846_set_format,
+ .get_fmt = hi846_get_format,
+ .get_selection = hi846_get_selection,
+};
+
+static const struct v4l2_subdev_ops hi846_subdev_ops = {
+ .video = &hi846_video_ops,
+ .pad = &hi846_pad_ops,
+};
+
+static const struct media_entity_operations hi846_subdev_entity_ops = {
+ .link_validate = v4l2_subdev_link_validate,
+};
+
+static int hi846_identify_module(struct hi846 *hi846)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&hi846->sd);
+ int ret;
+ u8 hi, lo;
+
+ ret = hi846_read_reg(hi846, HI846_REG_CHIP_ID_L, &lo);
+ if (ret)
+ return ret;
+
+ if (lo != HI846_CHIP_ID_L) {
+ dev_err(&client->dev, "wrong chip id low byte: %x", lo);
+ return -ENXIO;
+ }
+
+ ret = hi846_read_reg(hi846, HI846_REG_CHIP_ID_H, &hi);
+ if (ret)
+ return ret;
+
+ if (hi != HI846_CHIP_ID_H) {
+ dev_err(&client->dev, "wrong chip id high byte: %x", hi);
+ return -ENXIO;
+ }
+
+ dev_info(&client->dev, "chip id %02X %02X using %d mipi lanes\n", hi, lo,
+ hi846->nr_lanes);
+
+ return 0;
+}
+
+static int hi846_parse_dt(struct hi846 *hi846, struct device *dev)
+{
+ struct fwnode_handle *ep;
+ struct fwnode_handle *fwnode = dev_fwnode(dev);
+ struct v4l2_fwnode_endpoint bus_cfg = {
+ .bus_type = V4L2_MBUS_CSI2_DPHY
+ };
+ int ret;
+
+ ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
+ if (!ep) {
+ dev_err(dev, "unable to find endpoint node\n");
+ return -ENXIO;
+ }
+
+ ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
+ fwnode_handle_put(ep);
+ if (ret) {
+ dev_err(dev, "failed to parse endpoint node: %d\n", ret);
+ return ret;
+ }
+
+ if (bus_cfg.bus.mipi_csi2.num_data_lanes != 2 &&
+ bus_cfg.bus.mipi_csi2.num_data_lanes != 4) {
+ dev_err(dev, "number of CSI2 data lanes %d is not supported",
+ bus_cfg.bus.mipi_csi2.num_data_lanes);
+ v4l2_fwnode_endpoint_free(&bus_cfg);
+ return -EINVAL;
+ }
+
+ hi846->nr_lanes = bus_cfg.bus.mipi_csi2.num_data_lanes;
+ v4l2_fwnode_endpoint_free(&bus_cfg);
+
+ hi846->rst_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(hi846->rst_gpio)) {
+ dev_err(dev, "failed to get reset gpio: %pe\n", hi846->rst_gpio);
+ return PTR_ERR(hi846->rst_gpio);
+ }
+
+ hi846->shutdown_gpio = devm_gpiod_get_optional(dev, "shutdown", GPIOD_OUT_LOW);
+ if (IS_ERR(hi846->shutdown_gpio)) {
+ dev_err(dev, "failed to get shutdown gpio: %pe\n", hi846->shutdown_gpio);
+ return PTR_ERR(hi846->shutdown_gpio);
+ }
+
+ return 0;
+}
+
+static int hi846_probe(struct i2c_client *client)
+{
+ struct hi846 *hi846;
+ int ret;
+ int i;
+ u32 mclk_freq;
+
+ hi846 = devm_kzalloc(&client->dev, sizeof(*hi846), GFP_KERNEL);
+ if (!hi846)
+ return -ENOMEM;
+
+ ret = hi846_parse_dt(hi846, &client->dev);
+ if (ret) {
+ dev_err(&client->dev, "failed to check HW configuration: %d", ret);
+ return ret;
+ }
+
+ hi846->clock = devm_clk_get(&client->dev, NULL);
+ if (IS_ERR(hi846->clock)) {
+ dev_err(&client->dev, "failed to get clock: %pe\n", hi846->clock);
+ return PTR_ERR(hi846->clock);
+ }
+
+ mclk_freq = clk_get_rate(hi846->clock);
+ dev_dbg(&client->dev, "clk rate: %u\n", mclk_freq);
+
+ for (i = 0; i < HI846_NUM_SUPPLIES; i++)
+ hi846->supplies[i].supply = hi846_supply_names[i];
+
+ ret = devm_regulator_bulk_get(&client->dev, HI846_NUM_SUPPLIES,
+ hi846->supplies);
+ if (ret < 0)
+ return ret;
+
+ mutex_init(&hi846->mutex);
+
+ hi846->cur_mode = &supported_modes[0];
+ ret = hi846_init_controls(hi846);
+ if (ret) {
+ dev_err(&client->dev, "failed to init controls: %d", ret);
+ return ret;
+ }
+
+ v4l2_i2c_subdev_init(&hi846->sd, client, &hi846_subdev_ops);
+ hi846->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ hi846->sd.entity.ops = &hi846_subdev_entity_ops;
+ hi846->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
+ hi846->pad.flags = MEDIA_PAD_FL_SOURCE;
+ ret = media_entity_pads_init(&hi846->sd.entity, 1, &hi846->pad);
+ if (ret) {
+ dev_err(&client->dev, "failed to init entity pads: %d", ret);
+ goto probe_error_v4l2_ctrl_handler_free;
+ }
+
+ ret = hi846_power_on(hi846);
+ if (ret)
+ goto probe_error_media_entity_cleanup;
+
+ ret = hi846_identify_module(hi846);
+ if (ret)
+ goto probe_error_media_entity_cleanup;
+
+ ret = v4l2_async_register_subdev_sensor(&hi846->sd);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed to register V4L2 subdev: %d",
+ ret);
+ goto probe_error_media_entity_cleanup;
+ }
+
+ pm_runtime_set_active(&client->dev);
+ pm_runtime_enable(&client->dev);
+ pm_runtime_idle(&client->dev);
+
+ return 0;
+
+probe_error_media_entity_cleanup:
+ hi846_power_off(hi846);
+ media_entity_cleanup(&hi846->sd.entity);
+
+probe_error_v4l2_ctrl_handler_free:
+ v4l2_ctrl_handler_free(hi846->sd.ctrl_handler);
+ mutex_destroy(&hi846->mutex);
+
+ return ret;
+}
+
+static int hi846_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct hi846 *hi846 = to_hi846(sd);
+
+ v4l2_async_unregister_subdev(sd);
+ media_entity_cleanup(&sd->entity);
+ v4l2_ctrl_handler_free(sd->ctrl_handler);
+
+ pm_runtime_disable(&client->dev);
+ if (!pm_runtime_status_suspended(&client->dev))
+ hi846_suspend(&client->dev);
+ pm_runtime_set_suspended(&client->dev);
+
+ mutex_destroy(&hi846->mutex);
+
+ return 0;
+}
+
+static UNIVERSAL_DEV_PM_OPS(hi846_pm_ops, hi846_suspend, hi846_resume, NULL);
+
+static const struct of_device_id hi846_of_match[] = {
+ { .compatible = "hynix,hi846", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, hi846_of_match);
+
+static struct i2c_driver hi846_i2c_driver = {
+ .driver = {
+ .name = "hi846",
+ .pm = &hi846_pm_ops,
+ .of_match_table = of_match_ptr(hi846_of_match),
+ },
+ .probe_new = hi846_probe,
+ .remove = hi846_remove,
+};
+
+module_i2c_driver(hi846_i2c_driver);
+
+MODULE_AUTHOR("Angus Ainslie <[email protected]>");
+MODULE_AUTHOR("Martin Kepplinger <[email protected]>");
+MODULE_DESCRIPTION("Hynix HI846 sensor driver");
+MODULE_LICENSE("GPL v2");
--
2.30.2

2021-06-11 10:19:44

by Martin Kepplinger

[permalink] [raw]
Subject: [PATCH v5 4/5] arm64: defconfig: enable VIDEO_HI846

build the driver for the Hi-846 camera by default on arm64, where it's
going to be used on at least the imx8mq-librem5 board.

Signed-off-by: Martin Kepplinger <[email protected]>
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 1f1cb5b0dfe0..3a838464d3c1 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -665,6 +665,7 @@ CONFIG_VIDEO_RENESAS_FCP=m
CONFIG_VIDEO_RENESAS_VSP1=m
CONFIG_SDR_PLATFORM_DRIVERS=y
CONFIG_VIDEO_RCAR_DRIF=m
+CONFIG_VIDEO_HI846=m
CONFIG_VIDEO_IMX219=m
CONFIG_VIDEO_OV5645=m
CONFIG_VIDEO_QCOM_CAMSS=m
--
2.30.2

2021-06-18 11:15:25

by kernel test robot

[permalink] [raw]
Subject: Re: [PATCH v5 3/5] media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera

Hi Martin,

I love your patch! Yet something to improve:

[auto build test ERROR on linuxtv-media/master]
[also build test ERROR on next-20210617]
[cannot apply to robh/for-next arm64/for-next/core linus/master v5.13-rc6]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url: https://github.com/0day-ci/linux/commits/Martin-Kepplinger/Add-support-for-the-Hynix-Hi-846-camera/20210616-213802
base: git://linuxtv.org/media_tree.git master
config: powerpc64-randconfig-r002-20210618 (attached as .config)
compiler: clang version 13.0.0 (https://github.com/llvm/llvm-project 64720f57bea6a6bf033feef4a5751ab9c0c3b401)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install powerpc64 cross compiling tool for clang build
# apt-get install binutils-powerpc64-linux-gnu
# https://github.com/0day-ci/linux/commit/a6a93a98f579077a210a432a360082e4382f531a
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Martin-Kepplinger/Add-support-for-the-Hynix-Hi-846-camera/20210616-213802
git checkout a6a93a98f579077a210a432a360082e4382f531a
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=powerpc64

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <[email protected]>

All error/warnings (new ones prefixed by >>):

In file included from drivers/media/i2c/hi846.c:13:
In file included from include/linux/regulator/consumer.h:35:
In file included from include/linux/suspend.h:5:
In file included from include/linux/swap.h:9:
In file included from include/linux/memcontrol.h:13:
In file included from include/linux/cgroup.h:26:
In file included from include/linux/kernel_stat.h:9:
In file included from include/linux/interrupt.h:11:
In file included from include/linux/hardirq.h:11:
In file included from arch/powerpc/include/asm/hardirq.h:6:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:13:
In file included from arch/powerpc/include/asm/io.h:619:
arch/powerpc/include/asm/io-defs.h:47:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
DEF_PCI_AC_NORET(insl, (unsigned long p, void *b, unsigned long c),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/io.h:616:3: note: expanded from macro 'DEF_PCI_AC_NORET'
__do_##name al; \
^~~~~~~~~~~~~~
<scratch space>:182:1: note: expanded from here
__do_insl
^
arch/powerpc/include/asm/io.h:558:56: note: expanded from macro '__do_insl'
#define __do_insl(p, b, n) readsl((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
~~~~~~~~~~~~~~~~~~~~~^
In file included from drivers/media/i2c/hi846.c:13:
In file included from include/linux/regulator/consumer.h:35:
In file included from include/linux/suspend.h:5:
In file included from include/linux/swap.h:9:
In file included from include/linux/memcontrol.h:13:
In file included from include/linux/cgroup.h:26:
In file included from include/linux/kernel_stat.h:9:
In file included from include/linux/interrupt.h:11:
In file included from include/linux/hardirq.h:11:
In file included from arch/powerpc/include/asm/hardirq.h:6:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:13:
In file included from arch/powerpc/include/asm/io.h:619:
arch/powerpc/include/asm/io-defs.h:49:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
DEF_PCI_AC_NORET(outsb, (unsigned long p, const void *b, unsigned long c),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/io.h:616:3: note: expanded from macro 'DEF_PCI_AC_NORET'
__do_##name al; \
^~~~~~~~~~~~~~
<scratch space>:184:1: note: expanded from here
__do_outsb
^
arch/powerpc/include/asm/io.h:559:58: note: expanded from macro '__do_outsb'
#define __do_outsb(p, b, n) writesb((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
~~~~~~~~~~~~~~~~~~~~~^
In file included from drivers/media/i2c/hi846.c:13:
In file included from include/linux/regulator/consumer.h:35:
In file included from include/linux/suspend.h:5:
In file included from include/linux/swap.h:9:
In file included from include/linux/memcontrol.h:13:
In file included from include/linux/cgroup.h:26:
In file included from include/linux/kernel_stat.h:9:
In file included from include/linux/interrupt.h:11:
In file included from include/linux/hardirq.h:11:
In file included from arch/powerpc/include/asm/hardirq.h:6:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:13:
In file included from arch/powerpc/include/asm/io.h:619:
arch/powerpc/include/asm/io-defs.h:51:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
DEF_PCI_AC_NORET(outsw, (unsigned long p, const void *b, unsigned long c),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/io.h:616:3: note: expanded from macro 'DEF_PCI_AC_NORET'
__do_##name al; \
^~~~~~~~~~~~~~
<scratch space>:186:1: note: expanded from here
__do_outsw
^
arch/powerpc/include/asm/io.h:560:58: note: expanded from macro '__do_outsw'
#define __do_outsw(p, b, n) writesw((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
~~~~~~~~~~~~~~~~~~~~~^
In file included from drivers/media/i2c/hi846.c:13:
In file included from include/linux/regulator/consumer.h:35:
In file included from include/linux/suspend.h:5:
In file included from include/linux/swap.h:9:
In file included from include/linux/memcontrol.h:13:
In file included from include/linux/cgroup.h:26:
In file included from include/linux/kernel_stat.h:9:
In file included from include/linux/interrupt.h:11:
In file included from include/linux/hardirq.h:11:
In file included from arch/powerpc/include/asm/hardirq.h:6:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:13:
In file included from arch/powerpc/include/asm/io.h:619:
arch/powerpc/include/asm/io-defs.h:53:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
DEF_PCI_AC_NORET(outsl, (unsigned long p, const void *b, unsigned long c),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/io.h:616:3: note: expanded from macro 'DEF_PCI_AC_NORET'
__do_##name al; \
^~~~~~~~~~~~~~
<scratch space>:188:1: note: expanded from here
__do_outsl
^
arch/powerpc/include/asm/io.h:561:58: note: expanded from macro '__do_outsl'
#define __do_outsl(p, b, n) writesl((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
~~~~~~~~~~~~~~~~~~~~~^
>> drivers/media/i2c/hi846.c:1489:2: warning: comparison of distinct pointer types ('typeof ((link_freq)) *' (aka 'long long *') and 'uint64_t *' (aka 'unsigned long long *')) [-Wcompare-distinct-pointer-types]
do_div(link_freq, fps);
^~~~~~~~~~~~~~~~~~~~~~
include/asm-generic/div64.h:228:28: note: expanded from macro 'do_div'
(void)(((typeof((n)) *)0) == ((uint64_t *)0)); \
~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~
>> drivers/media/i2c/hi846.c:1491:2: warning: comparison of distinct pointer types ('typeof ((frame_length)) *' (aka 'int *') and 'uint64_t *' (aka 'unsigned long long *')) [-Wcompare-distinct-pointer-types]
do_div(frame_length, HI846_LINE_LENGTH);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/asm-generic/div64.h:228:28: note: expanded from macro 'do_div'
(void)(((typeof((n)) *)0) == ((uint64_t *)0)); \
~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~
>> drivers/media/i2c/hi846.c:1491:2: error: incompatible pointer types passing 'int *' to parameter of type 'uint64_t *' (aka 'unsigned long long *') [-Werror,-Wincompatible-pointer-types]
do_div(frame_length, HI846_LINE_LENGTH);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/asm-generic/div64.h:245:22: note: expanded from macro 'do_div'
__rem = __div64_32(&(n), __base); \
^~~~
include/asm-generic/div64.h:219:38: note: passing argument to parameter 'dividend' here
extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor);
^
>> drivers/media/i2c/hi846.c:1491:2: warning: shift count >= width of type [-Wshift-count-overflow]
do_div(frame_length, HI846_LINE_LENGTH);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/asm-generic/div64.h:241:25: note: expanded from macro 'do_div'
} else if (likely(((n) >> 32) == 0)) { \
^ ~~
include/linux/compiler.h:77:40: note: expanded from macro 'likely'
# define likely(x) __builtin_expect(!!(x), 1)
^
>> drivers/media/i2c/hi846.c:1529:26: warning: address of 'hi846->cur_mode->reg_list_2lane' will always evaluate to 'true' [-Wpointer-bool-conversion]
if (!&hi846->cur_mode->reg_list_2lane) {
~ ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~
>> drivers/media/i2c/hi846.c:1535:26: warning: address of 'hi846->cur_mode->reg_list_4lane' will always evaluate to 'true' [-Wpointer-bool-conversion]
if (!&hi846->cur_mode->reg_list_4lane) {
~ ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~
12 warnings and 1 error generated.


vim +1491 drivers/media/i2c/hi846.c

1477
1478 static int hi846_set_video_mode(struct hi846 *hi846, int fps)
1479 {
1480 struct i2c_client *client = v4l2_get_subdevdata(&hi846->sd);
1481 int frame_length;
1482 int ret = 0;
1483 int dummy_lines;
1484 s64 link_freq = hi846_get_link_freq(hi846);
1485
1486 dev_dbg(&client->dev, "%s: link freq: %lld\n", __func__,
1487 hi846_get_link_freq(hi846));
1488
> 1489 do_div(link_freq, fps);
1490 frame_length = link_freq;
> 1491 do_div(frame_length, HI846_LINE_LENGTH);
1492
1493 dummy_lines = (frame_length > hi846->cur_mode->frame_len) ?
1494 (frame_length - hi846->cur_mode->frame_len) : 0;
1495
1496 frame_length = hi846->cur_mode->frame_len + dummy_lines;
1497
1498 dev_dbg(&client->dev, "%s: frame length calculated: %d\n", __func__,
1499 frame_length);
1500
1501 hi846_write_reg_16(hi846, HI846_REG_FLL, frame_length & 0xFFFF, &ret);
1502 hi846_write_reg_16(hi846, HI846_REG_LLP, HI846_LINE_LENGTH & 0xFFFF, &ret);
1503
1504 return ret;
1505 }
1506
1507 static int hi846_start_streaming(struct hi846 *hi846)
1508 {
1509 struct i2c_client *client = v4l2_get_subdevdata(&hi846->sd);
1510 int ret = 0;
1511 u8 val;
1512
1513 if (hi846->nr_lanes == 2)
1514 ret = hi846_write_reg_list(hi846, &hi846_init_regs_list_2lane);
1515 else
1516 ret = hi846_write_reg_list(hi846, &hi846_init_regs_list_4lane);
1517 if (ret) {
1518 dev_err(&client->dev, "failed to set plls: %d\n", ret);
1519 return ret;
1520 }
1521
1522 ret = hi846_write_reg_list(hi846, &hi846->cur_mode->reg_list_config);
1523 if (ret) {
1524 dev_err(&client->dev, "failed to set mode: %d\n", ret);
1525 return ret;
1526 }
1527
1528 if (hi846->nr_lanes == 2) {
> 1529 if (!&hi846->cur_mode->reg_list_2lane) {
1530 dev_err(&client->dev, "2 lanes unsupported for this mode\n");
1531 return -EINVAL;
1532 }
1533 ret = hi846_write_reg_list(hi846, &hi846->cur_mode->reg_list_2lane);
1534 } else {
> 1535 if (!&hi846->cur_mode->reg_list_4lane) {
1536 dev_err(&client->dev, "4 lanes unsupported for this mode\n");
1537 return -EINVAL;
1538 }
1539 ret = hi846_write_reg_list(hi846, &hi846->cur_mode->reg_list_4lane);
1540 }
1541 if (ret) {
1542 dev_err(&client->dev, "failed to set mipi mode: %d\n", ret);
1543 return ret;
1544 }
1545
1546 hi846_set_video_mode(hi846, hi846->cur_mode->fps);
1547
1548 ret = __v4l2_ctrl_handler_setup(hi846->sd.ctrl_handler);
1549 if (ret)
1550 return ret;
1551
1552 /*
1553 * Reading 0x0034 is purely done for debugging reasons: It is not
1554 * documented in the DS but only mentioned once:
1555 * "If 0x0034[2] bit is disabled , Visible pixel width and height is 0."
1556 * So even though that sounds like we won't see anything, we don't
1557 * know more about this, so in that case only inform the user but do
1558 * nothing more.
1559 */
1560 ret = hi846_read_reg(hi846, 0x0034, &val);
1561 if (ret)
1562 return ret;
1563 if (!(val & BIT(2)))
1564 dev_info(&client->dev, "visible pixel width and height is 0\n");
1565
1566 ret = hi846_write_reg(hi846, HI846_REG_MODE_SELECT,
1567 HI846_MODE_STREAMING);
1568 if (ret) {
1569 dev_err(&client->dev, "failed to start stream");
1570 return ret;
1571 }
1572
1573 hi846->streaming = 1;
1574
1575 dev_dbg(&client->dev, "%s: started streaming successfully\n", __func__);
1576
1577 return ret;
1578 }
1579

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/[email protected]


Attachments:
(No filename) (14.12 kB)
.config.gz (33.19 kB)
Download all attachments